RD20Ⅱ型钻机及空气潜孔锤钻进施工中若干问题探讨
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634

基金项目:


Discussion on Some Problems of RD20Drill and Construction with DTH Hammer Drilling Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用RD20Ⅱ型钻机及空气潜孔锤钻进工艺,有效地解决了大口径煤层气孔、矿井通风孔、电缆孔及水源井等钻探施工中硬岩钻进效率低,干旱缺水地区钻探成本高,地层遇水易坍塌、缩径等问题。在介绍了RD20Ⅱ型钻机和QL系列潜孔锤结构特点的基础上,总结了在空气潜孔锤钻进中的一些问题及解决思路和措施。

    Abstract:

    The low drilling efficiency in medium hard rock construction for coal bed gas hole, mine vent, cable openings and holes and water source well; high drilling cost in water shortage area, water encounter collapsing and diameter shrinkage were all overcome by using RD20Ⅱ drill and air downhole hammer drilling technology. Based on the introduction of structure characteristics of RD20Ⅱ drill and QL series of downhole hammer, the paper summed up some problems in air downhole hammer drilling with solving thoughts and measures.

    参考文献
    相似文献
    引证文献
引用本文

董润平,胡忠义. RD20Ⅱ型钻机及空气潜孔锤钻进施工中若干问题探讨[J].钻探工程,2011,38(12):50-53.
DONG Run-ping, HU Zhong-yi. Discussion on Some Problems of RD20Drill and Construction with DTH Hammer Drilling Technology[J]. Drilling Engineering, 2011,38(12):50-53.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-09-01
  • 最后修改日期:2011-09-01
  • 录用日期:2011-12-01
  • 在线发布日期: 2011-12-29
  • 出版日期:
×
《钻探工程》期刊采编系统正在进行升级改版,部分功能正在逐步完善,在此期间给大家的使用带来不便,敬请谅解。