江西省浮梁县朱溪矿区深孔钻探施工技术研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634

基金项目:


Study on Deep Hole Drilling in Zhuxi Mining Area of Jiangxi
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    详细介绍了朱溪矿区3个深孔钻遇地层、钻探设备、钻孔结构、钻头使用、起大钻、冲洗液使用、护孔堵漏、套管使用等具体情况。重点分析和总结了钻孔结构、钻头使用、冲洗液使用、护孔堵漏等钻探工艺技术,并提出今后深孔施工需慎重配套钻探设备、增大钻头外径、提高钻探效率、重视深孔孔斜尤其是方位超差和灰岩溶洞问题等建议。

    Abstract:

    The paper introduced 3 deep holes construction in Zhuxi mining area about the drilling formation, drilling equipment, borehole structure, bit application, drill string lifting, washing fluid application, wall protection & lost circulation control and casing situation. Analysis and summery emphasized the drilling technologies of borehole structure, bit application and wall protection & lost circulation control. Some suggestions were made for deep hole construction on drilling equipment matching; outside bit diameter increasing; drilling efficiency improvement; hole deviation, especially azimuth out of tolerance and karst cave.

    参考文献
    相似文献
    引证文献
引用本文

黄忠高,李志强,杨启文.江西省浮梁县朱溪矿区深孔钻探施工技术研究[J].钻探工程,2011,38(5):23-27.
HUANG Zhong-gao, LI Zhi-qiang, YANG Qi-wen. Study on Deep Hole Drilling in Zhuxi Mining Area of Jiangxi[J]. Drilling Engineering, 2011,38(5):23-27.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-11-07
  • 最后修改日期:2011-03-05
  • 录用日期:2011-03-07
  • 在线发布日期: 2011-05-27
  • 出版日期: 2011-05-25
×
《钻探工程》期刊采编系统正在进行升级改版,部分功能正在逐步完善,在此期间给大家的使用带来不便,敬请谅解。