| 山东莱州西岭勘查区ZK88-19深孔同径造斜绕障工艺 |
| |
| 引用本文： | 王林钢,潘垚,所建成,白露明,李召胜.山东莱州西岭勘查区ZK88-19深孔同径造斜绕障工艺[J].探矿工程,2020,47(12):55-59. |
| |
| 作者姓名： | 王林钢 潘垚 所建成 白露明 李召胜 |
| |
| 作者单位： | 山东黄金地质矿产勘查有限公司，山东 烟台 261400,山东黄金地质矿产勘查有限公司，山东 烟台 261400,山东黄金地质矿产勘查有限公司，山东 烟台 261400,山东黄金地质矿产勘查有限公司，山东 烟台 261400,山东黄金地质矿产勘查有限公司，山东 烟台 261400 |
| |
| 摘 要： | 山东莱州西岭勘查区ZK88-19号钻孔设计孔深2500 m，2016年12月开孔，于孔深2034 m处发生烧钻事故，处理孔底钻具时再次发生烧钻事故，导致2套钻具及2套内管总成滞留孔底；2017年8月，受划定环境保护区的影响，中断施工，直至2020年3月恢复施工，继续处理孔内事故难度很大；经过多次论证，应用了深孔同径造斜绕障技术，包括设计了造斜偏心楔、造斜钻头以及研发了偏心楔固定技术等，成功绕过事故段，恢复钻进。
|
| 关 键 词： | 深孔 同径造斜 造斜偏心楔 造斜钻头 偏心楔固定技术 烧钻事故 绕障技术 西岭勘查区 |
| 收稿时间： | 2020/5/8 0:00:00 |
| 修稿时间： | 2020/10/23 0:00:00 |
Same diameter directional drilling for obstacle bypassingin ZK88-19 deep hole in the Xiling gold exploration area of Shandong |
| |
| WANG Lingang,PAN Yao,SUO Jiancheng,BAI Luming and LI Zhaosheng.Same diameter directional drilling for obstacle bypassingin ZK88-19 deep hole in the Xiling gold exploration area of Shandong[J].Exploration Engineering(Drilling & Tunneling),2020,47(12):55-59. |
| |
| Authors: | WANG Lingang PAN Yao SUO Jiancheng BAI Luming and LI Zhaosheng |
| |
| Affiliation: | Shandong Gold Geology and Mineral Exploration Co., Ltd., Yantai Shandong 261400, China,Shandong Gold Geology and Mineral Exploration Co., Ltd., Yantai Shandong 261400, China,Shandong Gold Geology and Mineral Exploration Co., Ltd., Yantai Shandong 261400, China,Shandong Gold Geology and Mineral Exploration Co., Ltd., Yantai Shandong 261400, China,Shandong Gold Geology and Mineral Exploration Co., Ltd., Yantai Shandong 261400, China |
| |
| Abstract: | Borehole ZK88-19 in the Xiling exploration area of Shandong Laizhou was designed with depth of 2500m, and drilling started in December 2016. Bit-burning happened at depth of 2034m, and it happened again when dealing with the downhole tool, resulting in two sets of drill tools and two sets of inner tube assemblies stuck at the bottom of the hole. In August 2017, drilling was forced to suspend due to the delineation of the environmental protection zone, and was resumed until March 2020. It was very difficult to continue to deal with the fish lost in the hole. Through feasibility study and verification, the self-developed deep-hole same-diameter directional drilling technology for obstacle bypassing, including design of the deflection wedge and deflection drill bit, and development of the deflection wedge placement technique, was applied and successfully bypassed the incident section, and drilling resumed. |
| |
| Keywords: | deep hole same-diameter deflection deflection wedge deflection bit deflection wedge placement bit-burning obstacle bypassing Xiling exploration area |
|
| 点击此处可从《探矿工程》浏览原始摘要信息 |
|
点击此处可从《探矿工程》下载全文 |
|
