首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Ferric oxide‐loaded hybrid sorbents are environmentally benign and exhibit sorption behaviors for chromium removal from waters. In the current study, glycidyl methacrylate‐based polymer (GMD) and nanosized ferric oxide loaded glycidyl methacrylate‐based polymer (GMDFe) were prepared and assayed to examine the effect of ferric oxide loading on chromium sorption from aqueous solution for the first time from the equilibrium and kinetic points of view. The experimental equilibrium data, suitably fitted by the Langmuir and Freundlich isotherms, have shown that ferric oxide loaded hybrid sorbent exhibits higher adsorption capacity than glycidyl methacrylate‐based polymer (GMD). The Langmuir isotherm model was found to be the most suitable one for the Cr(VI) adsorption. The maximum adsorption capacities of GMD and GMDFe sorbents were determined at pH 4 as 109.54 and 157.52 mg/g, respectively. A series of column experiments was carried out to determine the breakthrough curves. The column was regenerated by eluting Cr(VI) using NaOH (10% w/v) solution after adsorption studies.  相似文献   

2.
This study reports on the adsorption characteristics of Pb(II) ions from aqueous solutions using ZnCl2‐activated date (Phoenix dactylifera) bead (ADB) carbon with respect to change in adsorbent dosage, initial pH, contact time, initial concentration, and temperature of the solution. Kinetic studies of the data showed that the adsorption follows the pseudo‐second‐order kinetic model. Thermodynamic parameters, enthalpy change (ΔH° = 55.11 kJ/mol), entropy change (ΔS° = ? 0.193 kJ/mol/K), and Gibbs free energy change (ΔG°) were also calculated for the uptake of Pb(II) ions. These parameters show that adsorption on the surface of ADB was feasible, spontaneous in nature, and endothermic between temperatures of 298.2 and 318.2 K. The equilibrium data better fitted the Langmuir and Freundlich isotherm models than the D–R adsorption isotherm model for studying the adsorption behavior of Pb(II) onto the ADB carbon. It could be observed that the maximum adsorption capacity of ADB was 76.92 mg/g at 318.2 K and pH 6.5.  相似文献   

3.
The adsorption of nickel and copper in a bicomponent system using the nonliving biomass of the marine brown alga Laminaria japonica was investigated in batch systems as a function of initial solution pH, contact time and temperature. The adsorption of nickel and copper was strongly pH dependent. Kinetic studies pointed to a rapid uptake with an equilibrium time of about 30 min. The kinetic curves were successfully fitted by linear regression to pseudo first and pseudo‐second‐order equations. The equilibrium data was analyzed using several models, including the extended Langmuir equation, modified extended Langmuir model and combined extended Langmuir‐Freundlich model. The results suggested that the competitive adsorption of nickel and copper at all temperatures was best represented by the combined extended Langmuir‐Freundlich isotherm. The isotherms indicated competitive uptake, with copper being preferentially adsorbed followed by nickel with an increase in the amount of solute in solution. Thermodynamic analysis revealed that the simultaneous adsorption of nickel and copper ions could be considered to be a spontaneous, endothermic process, with increased randomness.  相似文献   

4.
Adsorption of reactive black 5 (RB5) from aqueous solution onto chitosan was investigated in a batch system. The effects of solution pH, initial dye concentration, and temperature were studied. Adsorption data obtained from different batch experiments were modeled using both pseudo first‐ and second‐order kinetic equations. The equilibrium adsorption data were fitted to the Freundlich, Tempkin, and Langmuir isotherms over a dye concentration range of 45–100 µmol/L. The best results were achieved with the pseudo second‐order kinetic and Langmuir isotherm equilibrium models, respectively. The equilibrium adsorption capacity (qe) was increased with increasing the initial dye concentration and solution temperature, and decreasing solution pH. The chitosan flakes for the adsorption of the dye was regenerated efficiently through the alkaline solution and was then reused for dye removal. The activation energy (Ea) of sorption kinetics was estimated to be 13.88 kJ/mol. Thermodynamic parameters such as changes in free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) were evaluated by applying the van't Hoff equation. The thermodynamics of reactive dye adsorption by chitosan indicates its spontaneous and endothermic nature.  相似文献   

5.
Activated carbons prepared from sunflower seed hull have been used as adsorbents for the removal of acid blue 15 (AB‐15) from aqueous solution. Batch adsorption techniques were performed to evaluate the influences of various experimental parameters, e. g., temperature, adsorbent dosage, pH, initial dye concentration and contact time on the adsorption process. The optimum conditions for AB‐15 removal were found to be pH = 3, adsorbent dosage = 3 g/L and equilibrium time = 4 h at 30°C. The adsorption of AB‐15 onto the adsorbent was found to increase with increasing dosage. It was found from experimental results that the Langmuir isotherm fits the data better than the Freundlich and Temkin isotherms. The maximum adsorption capacity, Qm (at 30°C) was calculated for SF1, SF2, and SF3 as 75, 125 and 110 mg g–1 of adsorbent, respectively. It was found that the adsorption follows pseudo‐second order kinetics. The thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were also evaluated. The activated carbons prepared were characterized by FT‐IR, SEM and BET analysis.  相似文献   

6.
Nymphaea rubra stem was used as a low cost and easily available biosorbent for the removal of Reactive Red 2 dye from an aqueous solution. Initially, the effects of biosorbent dosage (0.2–1.0 g L–1), pH (1–6), and dye concentration (30–110 mg L–1) on dye removal were studied. Batch experiments were carried out for biosorption kinetics and isotherm studies. The results showed that dye uptake capacity was found to increase with a decrease in biosorbent dosage. Equilibrium uptake capacity was found to be greatest at a pH value of 2.0, when compared to all other pH values studied. The equilibrium biosorption isotherms were analyzed by the Freundlich and Langmuir models. The equilibrium data was found to fit very well with the Freundlich isotherm model when compared to the Langmuir isotherm model. The kinetic data was analyzed using pseudo-first order and pseudo-second order kinetic models. From the results, it was observed that the kinetic data was found to fit the pseudo-second order kinetic model very well. The surface morphology of the stem of the N. rubra biosorbent was exemplified by scanning electron microscopy. Fourier transform infrared analysis was employed to confirm the existence of an amine group in the stem of N. rubra.  相似文献   

7.
The present work involves the study of Se(IV) adsorption onto bagasse fly ash. The adsorbents were coated with a ferric chloride solution for the effective removal of selenium. The physico‐chemical characterization of the adsorbent was carried out using standard methods, e. g., proximate analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, thermo‐gravimetric analysis and differential thermal analysis. Batch experiments were carried out to determine the effect of various parameters such as adsorbent dose, initial pH, contact time, and temperature on the adsorption process. Results obtained from these studies were analyzed using various kinetic models and isotherms. Se(IV) adsorption onto adsorbent was high at low pH values, and decreased with an increase in initial pH. A temperature study showed that the uptake of Se(IV) was greatest at 293 K, within the temperature range studied. The parameters of pseudo first order, pseudo second order, and Weber‐Morris intra‐particle kinetic models were determined. Equilibrium isotherms were analyzed using Langmuir, Freundlich, and Temkin isotherms. Error analyses were also carried out using hybrid fractional error function and Marquardt's percent standard deviation.  相似文献   

8.
Batch sorption experiments were carried out for the adsorption of the basic dye Rhodamine B from aqueous solution using baryte as the adsorbent. The effect of adsorbent dosage, temperature, initial dye concentration and pH were studied. Adsorption data were modeled using first and second order kinetic equations and the intra particle diffusion model. Kinetic studies showed that the adsorption process followed second order rate kinetics with an average rate constant of 0.05458 g mg–1 min–1. Dye adsorption equilibrium was attained rapidly after 30 min of contact time. The equilibrium data was fitted to the Langmuir, Freundlich and Tempkin isotherms over a dye concentration range of 50–250 mg/L. The adsorption thermodynamic parameters showed that adsorption was an exothermic, spontaneous and less ordered arrangement process. The adsorbent, baryte, was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The results showed that baryte has good potential for the removal of Rhodamine B from dilute aqueous solution.  相似文献   

9.
Biomass char (BC) deriving from fast pyrolysis of biomass was a potential adsorption material due to its relative high fixed‐carbon content and the inherent porous structures. Adsorption of phosphate from aqueous solution by BC was investigated in this paper. The results showed that the adsorption capacity of BC was dependent on pyrolysis conditions, such as temperature and holding time. The maximum adsorption capacity for phosphate was approximately 15.11 mg g?1 at 298 K. The pseudo‐second order model of the adsorption kinetics indicated that the adsorption process was complex and several mechanisms were involved. Equilibrium isotherm was satisfactorily followed the Freundlich isotherm model. The KF value in Freundlich equation gradually increased with elevating temperature. Moreover, the thermodynamic constants: ΔG0, ΔH0, and ΔS0 were evaluated as ?6.49 kJ mol?1 (at 298 K), 13.41 kJ mol?1, and 66.70 J mol?1 K?1, respectively. Phosphate adsorption onto BC was spontaneous and endothermic. As a waste, BC was a potentially attractive adsorbent for phosphate removal from aqueous solution with low cost and high capability.  相似文献   

10.
In India, the annual production of tea is ca. 857,000 tonnes, which is 27.4% of the total world production. The amount of tea factory waste (TFW) produced per annum after processing is ca. 190,400 tonnes. TFW can be used as a low cost adsorbent for the removal of toxic metals from the aqueous phase. An investigation was carried out to study the feasibility of the use of TFW as an adsorbent for the removal of the heavy metal, zinc. Equilibrium, kinetic and thermodynamic studies were reported. The straight line plot of log (qe–q) versus time t for the adsorption of zinc shows the validity of the Lagergren equation. The various steps involved in adsorbate transport from the solution to the surface of the adsorbent particles were dealt with by using a Weber‐Morris plot, qe versus t0.5 for the TFW. The rate controlling parameters, kid,1 and kid,2, were determined and it was found that the macro‐pore diffusion rate was much larger than micro‐pore diffusion rate. A batch sorption model, which assumes the pseudo‐second‐order mechanism, was used to predict the rate constant of sorption, the equilibrium sorption capacity and the initial sorption rate with the effect of initial zinc (II) ion concentration. Equilibrium data obtained from the experiments were analyzed with various isotherms, i. e., Freundlich, Langmuir, Redlich‐Peterson and Tempkin. The adsorption equilibrium was reached in 30 min and the adsorption data fitted well to all models. The maximum adsorption capacity of TFW for zinc (II) ions was determined to be 14.2 mg/g. The capacity of adsorption on Zn(II) increased with increasing temperatures and pH. The maximum uptake level of zinc was observed at pH of 4.2. The various thermodynamic parameters, i. e., ΔG°, ΔH° and ΔS°, were estimated. The thermodynamics of the zinc ion/TFW system indicated a spontaneous, endothermic and random nature of the process. The results showed that the TFW, which has low economical value, is a suitable adsorbent for the removal of zinc (II) ions from aqueous solutions.  相似文献   

11.
The purpose of this work is the removal of basic dyes (Safranine T and Brilliant Green) from aqueous media by depolymerization products (DP) obtained from aminoglycolysis of waste poly(ethylene terephthalate) (PET). The surface morphology and physical properties of depolymerization product were also determined. Adsorption behaviors (adsorption capacities, adsorption kinetics and adsorption isotherms) of these samples were realized at room temperature. Then, the amounts of residual dye concentrations were measured using Visible Spectrophotometer at 530 and 618 nm for Safranine T (ST) and Brilliant Green (BG), respectively. All adsorption experiments were carried out for different depolymerization products (DP1, DP2, DP3, and DP4). Adsorption capacities of depolymerization products for both of dyes decrease with following order: DP2 > DP4 > DP1 > DP3. The maximum adsorption capacities for ST and BG onto DP2 sample were found to be 29 and 33 mg g?1, respectively. In addition, the adsorption kinetic results show that the pseudo‐second‐order kinetic model is more suitable than pseudo‐first‐order model for the adsorption of basic dyes onto DP samples. Adsorption data were evaluated using Langmuir and Freundlich adsorption isotherm models. The results revealed that the adsorption of basic dyes onto DP sample fit very well Langmuir isotherm model. In conclusion, the depolymerization products of post‐consumer PET bottles can be used as low cost adsorbent for the removal of basic dyes from wastewaters.  相似文献   

12.
Adsorption analysis is a method for describing an overall isotherm of a mixture of unknown composition such as natural organic substances or chemical industries wastewater by dividing into fictive components of different adsorbability. The adsorption behaviour of the fictive components is characterized by using the Freundlich isotherm. The competitive adsorption between these components is described by the Ideal Adsorbed Solution Theory (IAST). Usually, at given Freundlich parameters K and n, the initial concentrations of the fictive components must be adjusted in order to obtain a good fit between calculated and measured isotherm data points. The results of this adjustment depend to some extent on the minimization criteria. Previously, the modeling was done with empirical or numerical methods which required a lot of computation time and sometimes caused numerical problems which made the interpretation of the results difficult. This paper describes a mathematical method for the evaluation of isotherms by adsorption analysis.  相似文献   

13.
This paper deals with the removal of textile dyes from aqueous solutions by poly(propylene imine) dendrimer (PPI). Direct red 80 (DR80), Acid Green 25 (AG25), Acid Blue 7 (AB7), and Direct Red 23 (DR23) were used as model dyes. The effects of operational parameters on dye removal such as dendrimer concentration, dye concentration, salt (inorganic anions), and pH have been studied at 25°C. The Langmuir and Freundlich isotherm models were investigated. In addition, dye desorption of dendrimer was studied. The results indicated that acidic pH supported the adsorption of dyes by dendrimer. Furthermore studies of dye concentration and salt effects exhibited that dye removal percentage by dendrimer was decreased. It was found that the isotherm data of DR80, AG25, and DR23 followed Langmuir isotherm and isotherm data of AB7 followed Freundlich isotherm models. Desorption tests showed that maximum dye releasing of 76.5% for DR80, 84.5% for AG25, 87% for AB7, and 93% for DR23 were achieved in aqueous solution at pH 12. Based on the data of present study, one could conclude that the dendrimer being an environmentally friendly adsorbent with relatively large adsorption capacity might be a suitable alternative for elimination of dyes from colored textile wastewater.  相似文献   

14.
Pyridine is a very toxic pollutant that has to be removed from wastewater. In this work, adsorption of pyridine on activated carbon cloth (ACC) is studied as a possible alternative for eliminating pyridine from aqueous solution. The ACC was produced from polyacrylonitrile. The adsorption equilibrium data of pyridine on ACC was obtained in a batch adsorber. The experimental data was interpreted with the isotherms of Langmuir, Freundlich, and Prausnitz‐Radke (PR), and the PR isotherm better represented the experimental data. The capacity of ACC for adsorbing pyridine was favored increasing the solution pH from 3 to 6, and this effect was due to the π–π dispersive and electrostatic interactions between the pyridine species in solution and the surface complexes of ACC. The modified Langmuir model fitted reasonably well the influence of pH on the adsorption capacity. In this model was assumed that both neutral pyridine and pyridinium were simultaneously adsorbed on ACC accordingly to the experimental results. The adsorption capacity was almost independent of temperature. The reversibility study revealed that 75% of the pyridine can be desorbed from ACC indicating that part of the pyridine was irreversibly adsorbed, and possibly chemisorbed.  相似文献   

15.
The potential of MCM‐41 for the removal of cationic dyes from water solution was evaluated using sodium dodecyl sulfate (SDS) for the surface modification of this mesoporous material. Admicelle structures formed on the surface of the calcined MCM‐41 are capable of removing organic pollutants and cationic species from water environment. The structural, textural, and surface chemical characteristics of the prepared SDS‐modified MCM‐41 (SDS‐MCM‐41) were studied. The adsorption capacity of SDS‐MCM‐41 was evaluated for methylene blue (MB) as a target cationic dye. Equilibrium adsorption isotherm data were manipulated employing nonlinear regression analysis. The Langmuir, Freundlich, and Sips isotherm models were examined. The adsorption data were well fitted to both Langmuir and Sips isotherm models. The maximum adsorption capacity of SDS‐MCM‐41 for MB, based on Langmuir and Sips models, were 290.8 and 297.3 mg g?1, respectively. Ethanol was found to be an effective solvent for partial regeneration of the adsorbent.  相似文献   

16.
The adsorption behavior of methyl orange (MO) from aqueous solution onto raw bentonite (RB) sample was investigated as a function of parameters such as pH, inorganic anion, contact time, and temperature. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms. Langmuir adsorption capacity was found to be 34.34 mg/g at pH 4.0. The pseudo‐first‐order, pseudo‐second‐order kinetic, and the intra‐particle diffusion models were used to describe the kinetic data. The values of the energy (Ea), enthalpy (ΔH≠), and entropy of activation (ΔS≠) were calculated as 38.62 kJ/mol, 36.04 kJ/mol, and ?150.05 J/mol K, respectively, at pH 4.0.  相似文献   

17.
The adsorption of Cu(II) ions from aqueous solutions by soda lignin as an absorbent using a batch adsorption system is presented in this paper. The soda lignin used in this study was extracted from black liquor derived from oil palm empty fruit bunches (EFB) using 20% v/v sulfuric acid. The effects of varying experimental parameters such as pH value, adsorbent dosage, different concentrations of Cu(II) ions, and agitation period were investigated. The results revealed that the optimum adsorption of Cu(II) onto soda lignin was recorded at a pH of 5.0 at an adsorbent dosage of 0.5 g soda lignin and an agitation period of 40 min. The adsorption capacities and rates of Cu(II) ions onto soda lignin was evaluated. The Langmuir and Freundlich adsorption models were applied to calculate the isotherm constants. It was found that the adsorption isothermal data could be well interpreted by the Freundlich model. The kinetic experimental data properly correlated with the pseudo‐second‐order kinetic model, which implies that chemical sorption is the rate‐limiting step.  相似文献   

18.
The removal of three basic dyes by adsorption onto bentonite was investigated for single, binary, and ternary solutions in a batch system. Before and after dye adsorption, bentonite samples were analyzed by using X‐ray fluorescence spectrometer, SEM, and Fourier transform IR spectrometry. The D‐optimal design and response surface methodology were applied in designing the experiments for evaluating the interactive effects of each initial concentrations variable of the dyes in binary systems. Predicted values were found to be in good agreement with experimental values, which defined propriety of the model and the achievement of D‐optimal in optimization of adsorption of binary dye systems. The competitive adsorption results showed that the adsorption amount of a dye was suppressed in the presence and increasing concentrations of second or third dye. For mono‐component isotherm modeling, Langmuir and Freundlich models were applied to equilibrium data of single, binary, and ternary dye solutions, while modified Langmuir, Sheindrof–Rebhun–Sheintuch and modified extended Freundlich models were also applied to equilibrium data of binary dye solutions for multi‐component isotherm modeling. The results showed that the Langmuir was the more suitable model for single dye systems while extended Freundlich model fitted best to the experimental data with the lowest error values for multi‐dye systems.  相似文献   

19.
Adsorption is of significant importance for effluent treatment, especially for the treatment of colored effluent generated from the dyeing and bleaching industries. Low cost adsorbents have gained attention over the decades as a means of achieving very high removal efficiencies to meet effluent discharge standards. The present article reports on batch investigations for color removal from aqueous solutions of Methylene Blue (MB) and Congo Red (CR) using Rice Husk Ash (RHA) as an alternative low cost adsorbent. The performance analysis was carried out as a function of various operating parameters, such as initial concentration of dye, adsorbent dose, contact time, shaker speed, interruption of shaking and ionic concentration. Performance studies revealed that a very high percentage removal of color was achievable for both dyes. The maximum percentage removal of MB was 99.939%, while 98.835% removal was observed for CR. These percentage removals were better than existing systems. Detailed data analysis indicated that adsorption of MB followed the Temkin isotherm, while CR followed the Freundlich isotherm. These isotherms were feasible within the framework of experimentation. Batch kinetic data, on the other hand, indicated that pseudo second order kinetics governed adsorption in both cases. Sensitivity analysis further indicated that the effects of initial dye concentration, shaker speed, pH and ionic strength had no noticeable effect on the percentage dye removal at equilibrium. Batch desorption studies revealed that 50% acetone solution was optimum for CR, while desorption of MB varied directly with acetone concentration.  相似文献   

20.
Dodecylammonium bentonite (DB) and dodecylammonium sepiolite (DS) were used as sorbents for phenoxyalkanoic acid herbicides 2,4‐D ((2,4‐dichlorophenoxy)acetic acid), 2,4‐DP ((RS)‐2‐(2,4‐dichlorophenoxy)propionic acid), 2,4‐DB (4‐(2,4‐dichlorophenoxy)butyric acid), 2,4,5‐T ((2,4,5‐trichlorophenoxy)acetic acid), and MCPA ((4‐chloro‐2‐methylphenoxy)acetic acid). Langmuir, Freundlich, and the linear Henry’s Law isotherm adsorption parameters were calculated from the adsorption isotherms. Langmuir equation showed poor fit for both adsorbents. According to the evaluation using the Freundlich equation, the DS sample showed much higher and stronger sorption capacity than DB. Similar behaviour was also observed in the case of the linear Henry’s Law isotherm. The adsorption of the herbicides on both DB and DS decreased in the order of 2,4‐DB > 2,4,5‐T > 2,4‐DP > 2,4‐D > MCPA.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号