首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 528 毫秒
1.
High-calcium, nepheline-normative ankaramitic basalts (MgO > 10 wt.%, CaO/Al2O3 > 1) from Rinjani volcano, Lombok (Sunda arc, Indonesia) contain phenocrysts of clinopyroxene and olivine (Fo85–92) with inclusions of spinel (Cr# 58–77) and crystallised melt. Olivine crystals have variable but on average low NiO (0.10–0.23 wt.%) and high CaO (0.22–0.35 wt.%) contents for their forsterite number. The CaO content of Fo89–91 olivine is negatively correlated with the Al2O3 content of enclosed spinel (9–15 wt.%) and positively correlated with the CaO/Al2O3 ratios of melt inclusions (0.9–1.5). Major and trace element patterns of melt inclusions are similar to that of the host rock, indicating that the magma could have formed by accumulation of small batches of melt, with compositions similar to the melt inclusions. The liquidus temperature of the magma was  1275 °C, and its oxygen fugacity ≤ FMQ + 2.5. Correlations between K2O, Zr, Th and LREE in the melt inclusions are interpreted to reflect variable degrees of melting of the source; correlations between Al2O3, Na2O, Y and HREE are influenced by variations in the mineralogy of the source. The melts probably formed from a water-poor, clinopyroxene-rich mantle source.  相似文献   

2.
The redox state of subduction zones: insights from arc-peridotites   总被引:23,自引:0,他引:23  
Spinel peridotites from a variety of island arcs have been utilised to calculate the redox state of the mantle wedge above subduction zones. Oxygen fugacities (fO2 values) calculated from the ferric iron content of spinels, measured by Electron Microprobe (EMP) using secondary standards [Wood, B.J., Virgo, D., 1989. Upper mantle oxidation state: ferric iron contents of lherzolite spinels by 57Fe Mössbauer spectroscopy and resultant oxygen fugacities. Geochim. Cosmochim. Acta, 53, 1277–1291.], yield values which range from 0.3 to 2.0 above the fayalite–magnetite–quartz (FMQ) buffer. These data provide further evidence that the mantle wedge is ubiquitously oxidised relative to oceanic and ancient cratonic mantle. There is no correlation between fO2 values and the presence of hydrous phases and, in fact, the most oxidised samples contain no hydrous phases. Within individual suites there is no correlation between fO2 and degree of depletion as indicated by spinel Cr#, except for a suite of reacted forearc-peridotites. However, when the data is viewed as a whole there is broad a positive correlation between fO2 and spinel Cr# suggesting that partial melting processes may influence the redox state of the mantle wedge. We suggest that the ultimate source of the oxygen which oxidises the mantle wedge is from the subducted slab. It is not clear whether this oxidising agent is a solute-rich hydrous fluid or a water-bearing silicate melt. However, our data does indicate that silicate melts are effective oxidisers of the depleted shallow upper mantle. Simple mass balance calculations based on the ferric iron content of primitive subduction zone magmas indicates that the source region must contain 0.6–1.0 wt.% Fe2O3. This amount of Fe2O3 in a fertile spinel peridotite yields an oxygen fugacity of 0.5–1.7 log units above FMQ in the IAB source. If water is the sole oxidising agent in the mantle wedge then 0.030–0.075 wt.% H2O is required which is considerably less than the 0.25% H2O envisaged by Stolper and Newman [Stolper, E.M., Newman, S., 1994. The role of water in the petrogenesis of Mariana trough magmas. Earth Planet. Sci. Lett., 121, 293–325.], suggesting water is not necessarily an efficient oxidising agent. Alternatively, ferric iron may be added to the mantle wedge by addition of a ferric iron-rich sediment melt or more likely as a solute-rich hydrous fluid. This model would produce spinel, orthopyroxene or amphibole in the wedge with only a slight increase in fO2 of the source region. Although it is unclear which model is correct the maximum fO2 of the fertile mantle wedge is unlikely to be above FMQ+2 and therefore some decompression melting in the mantle wedge is required to explain the higher fO2 values of primitive arc lavas than arc-peridotites.  相似文献   

3.
Mantle xenoliths from the Olot volcanic district (NE Spain) comprise a bi-modal suite consisting of protogranular spinel lherzolites (cpx 12–14%) sometimes with pargasitic amphibole, and highly refractory spinel harzburgites (cpx ≤ 1%) with coarse-grained granular textures. The lherzolites range from slightly depleted to moderately LREE-enriched with flat HREE patterns between 1.5 and 2.7 × chondrite (Ch). In contrast, the harzburgites are extremely depleted in HREE (down to 0.2 × Ch) and strongly LREE-enriched (LaN/YbN = 12.3–17.2). LA-ICP-MS analyses of clinopyroxene and amphibole of the lherzolites highlight variable degrees of LREE depletion (HREE up to 13 × Ch, LaN/YbN down to 0.01), with the exception of a single sample in which both clinopyroxene and amphibole are LREE-enriched (LaN/YbN up to 19). In the harzburgites, clinopyroxenes display totally different REE distributions, characterized by extreme HREE depletion (down to 0.4 × Ch) and upward convex positively fractionated middle-light REE patterns (NdN/YbN up to 20.7 × Ch; LaN/YbN up to 12 × Ch). Sr–Nd–Hf isotopic data for both whole-rocks and cpx separates, coherently indicate depleted mantle (DM) compositions for the lherzolites (εSr = − 15 to − 26, εNd = + 9 to + 17, εHf = + 18 to + 68) and enriched mantle (EM) compositions for the harzburgites (εSr = − 10 to + 36, εNd = − 1 to − 6, εHf = + 3 to + 8). Modelling of the clinopyroxene REE data and isotopic systematics suggest that some lherzolites were affected by pre-Paleozoic (0.6–1 By) low-degree partial melting processes, while others probably reflect some extent of refertilization of the mantle protolith by metasomatizing melts similar to the Triassic rift-related tholeiites reported from several Pyrenean localities. The harzburgites represent extreme refractory residua, resulting from a complex depletion history due to multistage melt extraction as often observed in the cratonic mantle. The distinctive REE patterns and isotopic systematics of their clinopyroxenes suggest that the harzburgites were formed by the interaction of an ultra-depleted peridotite matrix with highly alkaline basic melts similar in composition to the Permo-Triassic alkaline lamprophyres which are widespread within the Iberian plate. Lherzolites possibly represent younger lithosphere (accreted asthenosphere?) up-lifted and juxtaposed to the older subcontinental lithospheric mantle (harzburgites) during the post-Variscan rifting of the Iberian margin. These two genetically different, but adjoining, mantle domains intimately mingled along the northern Iberian margin during the subsequent plate convergence processes, leading to the close association of harzburgites and lherzolites observed in the Olot mantle xenoliths and in some Pyrenean peridotite massifs.  相似文献   

4.
Orthopyroxene-rich olivine websterite xenoliths (OWB2) in Palaeogene basanites in East Serbia are mostly composed of tabular low-Al2O3 orthopyroxene (> 70 vol.%, Mg# 85–87) containing tiny Cr spinel inclusions. Orthopyroxene shows a slightly U-shaped primitive mantle-normalized trace element pattern with strong peaks at U and Pb, similar to that of orthopyroxene from normal regional peridotitic mantle. In between the orthopyroxenes are interstitial spaces composed of partially altered olivine (Mg# 85–87), clinopyroxene, Ti-rich spinel, Mg-bearing calcite, K-feldspar, apatite, ilmenite and relicts of a hydrous mineral. Clinopyroxene appears as selvages around orthopyroxene and as coarser euhedral crystals. Trace element patterns of the clinopyroxene selvages resemble those of adjacent orthopyroxene, whereas the coarser ones have flatter and more LREE- and LILE-enriched patterns, similar to that of metasomatic clinopyroxene. The OWB2 xenoliths are interpreted as having formed in two stages. During Stage I orthopyroxene crystallized, along with some spinel, olivine and probably hydrous phase(s). This original OWB2 lithology was a hydrous olivine-bearing orthopyroxenite that crystallised from subduction-related SiO2-saturated, boninite-like magmas. During Stage II the interstitial minerals formed due to infiltration of a low-SiO2, high-CaO and CO2-rich external melt, accompanied by decomposition of original H2O-bearing minerals. The calculated composition of the infiltrating liquid corresponds to a mafic alkaline melt similar to the basanitic host but more enriched in CO2, LREE and LILE. Metasomatism is interpreted in terms of small degree melts related to the Palaeogene mafic alkaline magmatism.  相似文献   

5.
The Tertiary volcanic rocks of the central and the eastern parts of the Oman Mountains consist mainly of basanites with abundant upper mantle ultramafic xenoliths. The lavas are alkaline (42–43 wt.% SiO2; 3.5–5.5 wt.% Na2O + K2O). They include primitive (11–14 wt.% MgO) features with strong OIB-like geochemical signatures. Trace element and Sr–Nd isotope data for the basanites suggest mixing of melts derived from variable degrees of melting of both garnet- and spinel lherzolite-facies mantle source. The associated xenolith suite consists mainly of spinel and Cr-bearing diopside wehrlite, lherzolite and dunite with predominantly granuloblastic textures. No significant difference in chemistry was found between the basanites and xenoliths from the central and eastern Oman Mountains, which indicate a similar mantle source. Calculated oxygen fugacity indicates equilibration of the xenoliths at − 0.43 to − 2.2 log units above the fayalite–magnetite–quartz (FMQ) buffer. Mantle xenolith equilibration temperatures range from 910–1045 + 50 °C at weakly constrained pressures between 13 and 21 kbar. Xenolith data and geophysical studies indicate that the Moho is located at a depth of  40 km. A geotherm substantially hotter (90 mW m− 2) than the crust–mantle boundary (45 mW m− 2) is indicated and probably relates to tectonothermal events associated with the local and regional Tertiary magmatism. The petrogenesis of the Omani Tertiary basanites is explained by partial melting of an asthenospheric mantle protolith during an extension phase predating opening of the Gulf of Aden and plume-related alkaline volcanic rocks.  相似文献   

6.
The Emeishan continental flood basalt (ECFB) sequence in Dongchuan, SW China comprises a basal tephrite unit overlain by an upper tholeiitic basalt unit. The upper basalts have high TiO2 contents (3.2–5.2 wt.%), relatively high rare-earth element (REE) concentrations (40 to 60 ppm La, 12.5 to 16.5 ppm Sm, and 3 to 4 ppm Yb), moderate Zr/Nb and Nb/La ratios (9.3–10.2 and 0.6–0.9, respectively) and relatively high Nd (t) values, ranging from − 0.94 to 2.3, and are comparable to the high-Ti ECFB elsewhere. The tephrites have relatively high P2O5 (1.3–2.0 wt.%), low REE concentrations (e.g., 17 to 23 ppm La, 4 to 5.3 ppm Sm, and 2 to 3 ppm Yb), high Nb/La (2.0–3.9) ratios, low Zr/Nb ratios (2.3–4.2), and extremely low Nd (t) values (mostly ranging from − 10.6 to − 11.1). The distinct compositional differences between the tephrites and the overlying tholeiitic basalts cannot be explained by either fractional crystallization or crustal contamination of a common parental magma. The tholeiitic basalts formed by partial melting of the Emeishan plume head at a depth where garnet was stable, perhaps > 80 km. We propose that the tephrites were derived from magmas formed when the base of the previously metasomatized, volatile-mineral bearing subcontinental lithospheric mantle was heated by the upwelling mantle plume.  相似文献   

7.
D. Phillips  J.W. Harris  K.S. Viljoen 《Lithos》2004,77(1-4):155-179
Silicate and oxide mineral inclusions in diamonds from the geologically and historically important De Beers Pool kimberlites in Kimberley, South Africa, are characterised by harzburgitic compositions (>90%), with lesser abundances from eclogitic and websteritic parageneses. The De Beers Pool diamonds contain unusually high numbers of inclusion intergrowths, with garnet+orthopyroxene±chromite±olivine and chromite+olivine assemblages dominant. More unusual intergrowths include garnet+olivine+magnesite and an eclogitic assemblage comprising garnet+clinopyroxene+rutile. The mineral chemistry of the De Beers Pool inclusions overlaps that of most worldwide localities. Peridotitic garnet inclusions exhibit variable CaO (<5.8 wt.%) and Cr2O3 contents (3.0–15.0 wt.%), although the majority are harzburgitic with very low calcium concentrations (<2 wt.% CaO). Eclogitic garnet inclusions are characterised by a wide range in CaO (3.3–21.1 wt.%) with low Cr2O3 (<1 wt.%). Websteritic garnets exhibit intermediate compositions. Most chromite inclusions contain 63–67 wt.% Cr2O3 and <0.5 wt.% TiO2. Olivine and orthopyroxene inclusions are magnesium-rich with Mg-numbers of 93–97. Olivine inclusions in chromite exhibit the highest Mg-numbers and also contain elevated Cr2O3 contents up to 1.0 wt.%. Peridotitic clinopyroxene inclusions are Cr-diopsides with up to 0.8 wt.% K2O. Eclogitic and websteritic clinopyroxene inclusions exhibit overlapping compositions with a wide range in Mg-numbers (66–86).

Calculated temperatures for non-touching inclusion pairs from individual diamonds range from 1082 to 1320 °C (average=1197 °C), whereas pressures vary from 4.6 to 7.7 GPa (average=6.3 GPa). Touching inclusion assemblages are characterised by equilibration temperatures of 995 to 1182 °C (average=1079 °C) and pressures of 4.2–6.8 GPa (average=5.4 GPa). Provided that the non-touching inclusions represent equilibrium assemblages, it is suggested that these inclusions record the conditions at the time of diamond crystallisation (1200 °C; 3.0 Ga). The lower average temperatures for touching inclusions are attributed to re-equilibration in a cooling mantle (1050 °C) prior to kimberlite eruption at 85 Ma. Pressure estimates for touching garnet–orthopyroxene inclusions are also skewed towards lower values than most non-touching inclusions. This apparent difference may be an artefact of the Al-exchange geobarometer and/or the result of sampling bias, due to limited numbers of non-touching garnet–orthopyroxene inclusions. Alternatively pressure differences could be caused by differential uplift in the mantle or possibly variations in thermal compressibility between diamond and silicate inclusions. However, thermodynamic modelling suggests that thermal compressibility differences would cause only minor changes in internal inclusion pressures (<0.2 GPa/100 °C).  相似文献   


8.
Several Paleozoic sutures in Southwestern China provide a record of the history of the Paleo-Tethys Ocean, whose birth and final closure are associated with the breakup and assembly of Gondwanaland. Recent studies indicate that there are widespread OIB-type mafic volcanic rocks within these suture zones and intervening terranes. This paper examines the geology and geochemistry of volcanic rocks in the Xiaruo-Tuoding area, a remnant passive margin succession of the Jinshajiang Paleo-Tethyan Ocean. The sedimentary and volcanic stratigraphy of this area is interpreted as a seaward dipping margin with a few continentward dipping normal faults. The available geochemistry of these volcanic rocks suggest that they are OIB-like basalts, characterised by SiO2 = 42.78–50.46 wt.%, high TiO2 contents (TiO2 = 2.2–3.55 wt.%), moderate MgO = 4.15–6.49 wt.%, Mg# = 0.37–0.50, high Ti/Y ratios (mostly > 450), large ion lithosphere elements enrichment, high strength field elements and rare earth elements, with La/Nb = 1.04–1.39, Ce/Yb = 18.38–30, Sm/Yb = 2.16–3.52, (87Sr/86Sr)i = 0.705350–0.707867, and Nd(t) = − 1.43–1.90. These geochemical and isotopic signatures are generally similar to those of the Emeishan flood basalts, which together with stratigraphic constraints, demonstrate that these volcanics were formed in a volcanic rifted margin, probably associated with a mantle plume. A new model is proposed to interpret the evolution of the Jinshajiang Paleo-Tethyan Ocean and its possible relationship to the Emeishan mantle plume. In this model, we argue that the opening of the Jinshajiang Paleo-Tethyan Ocean in the Carboniferous was caused by a mantle plume. The mantle plume was active to the east along the western margin of the Yangtze Craton between 300 and 260 Ma, from which the voluminous Emeishan flood basalts were erupted at 260 Ma. The closure of the Jinshajiang Ocean occurred since the Middle Permian. Continuous westward subduction generated the Jiangda-Weixi magmatic arc to the west of the Jinshajiang suture. This subduction also partly destroyed and/or tectonically sliced the volcanic rifted margin. Some seaward dipping volcanic-sedimentary sequences on the east flank of the Jinshajiang Ocean were preserved, but are strongly deformed.  相似文献   

9.
Megacrysts from the Grib kimberlite pipe (Arkhangelsk Province, Russia)   总被引:3,自引:0,他引:3  
The megacryst suite of the Grib kimberlite pipe (Arkhangelsk province, Russia) comprises garnet, clinopyroxene, magnesian ilmenite, phlogopite and garnet-clinopyroxene intergrowths. Crystalline inclusions, mainly of clinopyroxene and picroilmenite, occur in garnet megacrysts. Ilmenite is characterized by a wide range in the contents of MgO (10.6–15.5 wt.%) and Cr2O3 (0.7–8.3 wt.%). Megacryst garnets show wide variations in Cr2O3 (1.3–9.6 wt.%) and CaO (3.6–11.0 wt.%) but relatively constant MgO (15.4–22.3 wt.%) and FeO (5.2–9.9 wt.%). The pyroxenes also show wide variations in such oxides as Cr2O3, Al2O3 and Na2O (0.56–2.95; 0.86–3.25; 1.3–3.0 wt.%, respectively). The high magnesium and chromium content of all these minerals puts them together in one paragenetic group. This conclusion was confirmed by studies of the crystalline inclusions in megacrysts, which demonstrate similar variations in composition. Low concentration of hematite in ilmenite suggests reducing conditions during crystallization. PT estimates based on the clinopyroxene geothermobarometer (Contrib. Mineral. Petrol. 139 (2000) 541) show wide variations (624–1208 °C and 28.8–68.0 kbars), corresponding to a 40–45 mW/m2 conductive geotherm. The majority of Gar-Cpx intergrowths differ from the corresponding monomineralic megacrysts in having higher Mg contents and relatively low TiO2. The minerals from the megacryst association, as a rule, differ from the minerals of mantle xenoliths, but garnets in ilmenite-bearing peridotite xenoliths are compositionally similar to garnet megacrysts. The common features of trace element composition of megacryst minerals and kimberlite (they are poor in Zr group elements) suggest a genetic relationship. The origin of the megacrysts is proposed to be genetically connected with kimberlite magma-chamber evolution on the one hand and with associated mantle metasomatism on the other. We suggest that, depending on the primary melt composition, different paragenetic associations of macro/megacrysts can be crystallized in kimberlites. They include: (1) Fe–Ti (Mir, Udachnaya pipes); (2) high-Mg, Cr (Zagadochna, Kusova pipes); (3) high-Mg, Cr, Ti (Grib pipe).  相似文献   

10.
Garnet-bearing peridotitic rocks closely associated with eclogite within the Tromsø Nappe of the northern Scandinavian Caledonides show good evidence for prograde metamorphism. Early stages are recognized as inclusions of hornblende and chlorite in the cores of large garnet poikiloblasts. Closer to the garnet rim, clinopyroxene and Cr-poor spinel appear as additional inclusion phases. Four suites of spinel inclusions can be distinguished based on optical properties and chemical composition. The innermost suite (suite 1) has the lowest Cr# and highest Mg#. Further rimward, the spinel inclusions gradually change in composition, with increasing Cr# and decreasing Mg#. Spinel is rare in the matrix, but locally chromitic spinel occurs as larger grains. Garnet poikiloblasts are rimmed by a kelyphite zone consisting of Hbl + Cr-poor Spl or Opx ± Cpx + Cr-poor Spl, and locally an inner zone of Na-rich Hbl + Chl. Matrix assemblage in the garnet-bearing peridotitic rocks is Hbl + Chl + Cpx + Ol ± Cr-rich spinel, defining a strong foliation wrapping around garnets and associated kelyphites. Thin layers of garnet-orthopyroxenite and garnet–hornblende–zoisite–chlorite rocks are presumably coeval with the matrix foliation of the peridotitic rocks.

In dunitic to harzburgitic compositions large undulatory grains of Ol + Opx ± Chl + Spl apparently define the maximum-P conditions. This assemblage is succeeded by a recrystallized assemblage of Ol ± Tlc ± Mgs, which in turn is overgrown by strain-free poikiloblasts of orthopyroxene, indicating a temperature increase. This is postdated by Tlc + Ath ± Mgs, and finally serpentine.

PT estimates for the inclusion suites of clinopyroxene and spinel in garnet clearly indicate garnet growth and spinel consumption in a regime of increasing P. The inner suite (suite 1) apparently was in equilibrium with garnet, clinopyroxene and olivine at 1.40 GPa, 675 °C, whereas included spinel with maximum Cr# (suite 4) indicate 2.40 GPa at 740 °C. Grt + Opx from garnet-orthopyroxenite give 1.5–1.9 GPa at 740–770 °C, and Grt + Hbl + Zo + Chl from a zoisite-rich rock give 1.75 ± 0.25 GPa at 740 ± 30 °C, interpreted to represent recrystallization during uplift. In dunitic to harzburgitic compositions, early Ol + Opx ± Chl + Spl is succeeded by Ol ± Tlc ± Mgs, which in turn is overgrown by neoblasts of strain-free orthopyroxene, indicating temperature increase. This is postdated by Tlc + Ath ± Mgs, and finally serpentine.

The ultramafic rocks in the Tromsø Nappe were locally strongly hydrated before subduction along with associated eclogites and metasedimentary rocks during the early (Ordovician) stages of the Caledonian orogeny.  相似文献   


11.
Temperature estimates and chemical composition of mantle xenoliths from the Cretaceous rift system of NW Argentina (26°S) constrain the rift evolution and chemical and physical properties of the lithospheric mantle at the eastern edge of the Cenozoic Andean plateau. The xenolith suite comprises mainly spinel lherzolite and subordinate pyroxenite and carbonatized lherzolite. The spinel lherzolite xenoliths equilibrated at high-T (most samples >1000 °C) and P below garnet-in. The Sm–Nd systematics of compositionally unzoned clino- and orthopyroxene indicate a Cretaceous minimum age for the high-T regime, i.e., the asthenosphere/lithosphere thermal boundary was at ca. 70 km depth in the Cretaceous rift. Major elements and Cr, Ni, Co and V contents of the xenoliths range between values of primitive and depleted mantle. Calculated densities based on the bulk composition of the xenoliths are <3280 kg/m3 for the estimated PT conditions and indicate a buoyant, stable upper mantle lithosphere. The well-equilibrated metamorphic fabric and mineral paragenesis with the general lack of high-T hydrous phases did not preserve traces of metasomatism in the mantle xenoliths. Late Mesozoic metasomatism, however, is obvious in the gradual enrichment of Sr, U, Th and light to medium REE and changes in the radiogenic isotope composition of an originally depleted mantle. These changes are independent of the degree of depletion evidenced by major element composition. 143Nd/144Ndi ratios of clinopyroxene from the main group of xenoliths decrease with increasing Nd content from >0.5130 (depleted samples) to ca. 0.5127 (enriched samples). 87Sr/86Sri ratios (0.7127–0.7131, depleted samples; 0.7130–0.7134, enriched samples) show no variation with variable Sr contents. Pbi isotope ratios of the enriched samples are rather radiogenic (206Pb/204Pbi 18.8–20.6, 207Pb/204Pbi 15.6–15.7, 208Pb/204Pbi 38.6–47) compared with the Pb isotope signature of the depleted samples. The large scatter and high values of 208Pb/204Pbi ratios of many xenoliths indicates at least two Pb sources that are characterized by similar U/Pb but by different Th/Pb ratios. The dominant mantle type in the investigated system is depleted mantle according to its Sr and Nd isotopic composition with relatively radiogenic Pb isotope ratios. This mantle is different from the Pacific MORB source and old subcontinental mantle from the adjacent Brazilian Shield. Its composition probably reflects material influx into the mantle wedge during various episodes of subduction that commenced in early Paleozoic or even earlier. Old subcontinental mantle was already replaced in the Paleozoic, but some inheritance from old mantle lithosphere is represented by rare xenoliths with isotope signatures indicating a Proterozoic origin.  相似文献   

12.
Explosive eruptions at Mauna Loa summit ejected coarse-grained blocks (free of lava coatings) from Moku'aweoweo caldera. Most are gabbronorites and gabbros that have 0–26 vol.% olivine and 1–29 vol.% oikocrystic orthopyroxene. Some blocks are ferrogabbros and diorites with micrographic matrices, and diorite veins (≤ 2 cm) cross-cut some gabbronorites and gabbros. One block is an open-textured dunite.

The MgO of the gabbronorites and gabbros ranges  7–21 wt.%. Those with MgO > 10 wt.% have some incompatible-element abundances (Zr, Y, REE; positive Eu anomalies) lower than those in Mauna Loa lavas of comparable MgO; gabbros (MgO < 10 wt.%) generally overlap lava compositions. Olivines range Fo83–58, clinopyroxenes have Mg#s  83–62, and orthopyroxene Mg#s are 84–63 — all evolved beyond the mineral-Mg#s of Mauna Loa lavas. Plagioclase is An75–50. Ferrogabbro and diorite blocks have  3–5 wt.% MgO (TiO2 3.2–5.4%; K2O 0.8–1.3%; La 16–27 ppm), and a diorite vein is the most evolved (SiO2 59%, K2O 1.5%, La 38 ppm). They have clinopyroxene Mg#s 67–46, and plagioclase An57–40. The open-textured dunite has olivine  Fo83.5. Seven isotope ratios are 87Sr/86Sr 0.70394–0.70374 and 143Nd/144Nd 0.51293–0.51286, and identify the suite as belonging to the Mauna Loa system.

Gabbronorites and gabbros originated in solidification zones of Moku'aweoweo lava lakes where they acquired orthocumulate textures and incompatible-element depletions. These features suggest deeper and slower cooling lakes than the lava lake paradigm, Kilauea Iki, which is basalt and picrite. Clinopyroxene geobarometry suggests crystallization at < 1 kbar P. Highly evolved mineral Mg#s, < 75, are largely explained by cumulus phases exposed to evolving intercumulus liquids causing compositional ‘shifts.’ Ferrogabbro and diorite represent segregation veins from differentiated intercumulus liquids filter pressed into rigid zones of cooling lakes. Clinopyroxene geobarometry suggests < 300 bar P. Open-textured dunite represents olivine-melt mush, precursor to vertical olivine-rich bodies (as in Kilauea Iki). Its Fo83.5 identifies the most primitive lake magma as  8.3 wt.% MgO. Mass balancing and MELTS show that such a magma could have yielded both ferrogabbro and diorite by ≥ 50% fractional crystallization, but under different fO2: < FMQ (250 bar) led to diorite, and FMQ (250 bar) yielded ferrogabbro. These segregation veins, documented as similar to those of Kilauea, testify to appreciable volumes of ‘rhyolitic’ liquid forming in oceanic environments. Namely, SiO2-rich veins are intrinsic to all shields that reached caldera stage to accommodate various-sized cooling, differentiating lava lakes.  相似文献   


13.
SHRIMP zircon U–Pb ages and geochemical and Sr–Nd–Pb isotopic data are presented for the gabbroic intrusive from the southern Taihang Mountains to characterize the nature of the Mesozoic lithospheric mantle beneath the central North China Craton (NCC). The gabbroic rocks emplaced at 125 Ma and are composed of plagioclase (40–50%), amphibole (20–30%), clinopyroxene (10–15%), olivine (5–10%) and biotite (5–7%). Olivines have high MgO (Fo = 78–85) and NiO content. Clinopyroxenes are high in MgO and CaO with the dominant ones having the formula of En42–46Wo41–50Fs8–13. Plagioclases are dominantly andesine–labradorite (An = 46–78%) and have normal zonation from bytownite in the core to andesine in the rim. Amphiboles are mainly magnesio and actinolitic hornblende, distinct from those in the Precambrian high-pressure granulites of the NCC. These gabbroic rocks are characterized by high MgO (9.0–11.04%) and SiO2 (52.66–55.52%), and low Al2O3, FeOt and TiO2, and could be classified as high-mg basaltic andesites. They are enriched in LILEs and LREEs, depleted in HFSEs and HREEs, and exhibit (87Sr/86Sr)i = 0.70492–0.70539, εNd(t) = − 12.47–15.07, (206Pb/204Pb)i = 16.63–17.10, Δ8/4 = 70.1–107.2 and Δ7/4 = − 2.1 to − 9.4, i.e., an EMI-like isotopic signatures. Such geochemical features indicate that these early Cretaceous gabbroic rocks were originated from a refractory pyroxenitic veined-plus-peridotite source previously modified by an SiO2-rich melt that may have been derived from Paleoproterozoic subducted crustal materials. Late Mesozoic lithospheric extension might have induced the melting of the metasomatised lithospheric mantle in response to the upwelling of the asthenosphere to generate these gabbroic rocks in the southern Taihang Mountains.  相似文献   

14.
Valrie Chavagnac 《Lithos》2004,75(3-4):253-281
The Komati Formation of the Barberton greenstone belt (BGB), South Africa, is composed of both Al-undepleted and -depleted komatiites. The Al-undepleted komatiites are characterised by Al2O3/TiO2 and CaO/Al2O3 ratios of 15–18 and 1.1–1.5, respectively, and exhibit chondritic trace element contents and (Gd/Yb)N ratios. In contrast, the Al-depleted komatiites show significantly lower Al2O3/TiO2 ratios of 8–12, highly variable CaO/Al2O3 (0.19–2.81) ratios combined with (Gd/Yb)N ratios varying from 1.08 to 1.56. A Sm–Nd whole rock isochron for komatiites of the Komati Formation gives an age of 3657±170 Ma. 147Sm/144Nd ratios (0.1704 and 0.1964) are all lower than the chondritic value of 0.1967. The komatiite i,Nd(3.45) values cluster at +1.9±0.7.

Trace element distribution indicates that most of the primary geochemical and isotopic features of the komatiites were preserved in line with the conservation of the primary chemical composition of clinopyroxene. High field strength element and rare earth element abundances indicate that crustal contamination and post-crystallisation processes did not disturb the primary features of komatiites.

The Sm/Nd and Nb/U ratios of komatiites indicate that the Barberton greenstone belt mantle source has undergone melt extraction prior to komatiite formation. Variations of Al2O3/TiO2, (Gd/Yb)N, Zr/Sm and Sm/Nd ratios of komatiites indicate that a batch melting of slightly depleted mantle source during with garnet and/or clinopyroxene remained in the residue can produce the geochemical isotopic feature of the Barberton greenstone belt komatiites. Typical geochemical fingerprints of subduction-related processes (LILE enrichment, HFSE depletion compared to REE), as known from modern subduction zones, are not observed. Komatiites exhibit Ti/Zr, La/Nb, Nb/U, Sr/Nd and Ba/La ratios comparable to those of oceanic island basalt and mid-ocean ridge basalt. (La/Nb)PMN, (Sm/Yb)PMN, positive δNb values and flat or slightly enriched REE patterns suggest that BGB komatiites are part of an oceanic plateau rather than an oceanic island such as Iceland. Therefore, an oceanic plateau or mid-ocean ridge, in connection with an oceanic plateau, such as Ontong Java plateau or Caribbean–Colombian oceanic plateau, is a suitable tectonic setting for the formation of the BGB komatiites.  相似文献   


15.
Lamprophyres consisting mainly of diopside, phlogopite and K-feldspar formed in the early Tertiary around 60 Ma in the Beiya area and are characterized by low SiO2 ± 46–50 wt.%), Rb (31–45 ppm) and Sr (225–262 ppm), high Al2O3, (11.2–13.1 wt.%), CaO (8.0–8.7 wt.%), MgO (11.5–12.1 wt.%), K2O(4.9–5.5 wt.%), TiO2 (2.9–3.3 wt.%) and REE (174–177 ppm), and compatible elements (e.g. Sc, Cr and Ni) and HSF elements (e.g. Th, U, Zr, Nb, Ta, Ti and Y), and low 143Nd/144Nd 0.512372–0.512536, middle 87Sr/86Sr 0.707322–0.707395, middle 206Pb/204Pb 18.50–18.59, 207Pb/204Pb 15.60–15.65 and 208Pb/204Pb 38.75–38.8. These rocks developed peculiar quartz megacrysts with poly-layer reaction zones, melt inclusions, and partial melted K-feldspar and plagioclase inclusions, and plastic shapes. Important features of these rocks include: (1) hybrid composition of elements, (2) abrupt increase of SiO2 content of the melt, recorded by zoned diopside, (3) development of sanidine and aegirine-augite reaction zones, (4) alkaline melt and partial melted K-feldspar and plagioclase inclusions, (5) deformed quartz inclusions associated with quartz megacrysts, (6) the presence of quartz megacrysts in plastic shape with their parent melts, (7) the occurrence of olivine, high-MgO ilmenite and spinel inclusions within earlier formed diopside, phlogopite and magnetite. Median 87Sr/86Sr values between Tertiary alkaline porphyries in the Beiya area and the western Yunnan and Tertiary basalt in the western Yunnan indicate that the Beiya lamprophyre melts were derivative and resulted from the mixing between basic melts that were related to the partial melting of phenocrysts of spinel iherzolite from a mantle source. The alkaline melts originated from partial melting along the Jinshajiang subduction ductile shear zone at the contact between the buried Palaeo-Tethyan oceanic lithosphere and the upper mantle lithosphere. The alkaline melts are composed of 65% sanidine (Or70Ab28An2) and 35% SiO2. The melt mixing occurred in magma chambers in the middle-shallow crust at 8–10 km before the derivative lamprophyre melts intruded into the shallow cover in Beiya area. This mixing of basic and alkaline melts might represent a general process for the formation of lamprophyre in the western Yunnan.  相似文献   

16.
The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo–Mesozoic extension of the Europe–Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic–mafic intrusions. In this paper we present the results of field, structural and petrologic–geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt–rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (CeN/SmN = 0.006–0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle–melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo–An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3–5 kbar, i.e. 9–15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.  相似文献   

17.
We report trace element and Sr–Nd isotopic compositions of Early Miocene (22–18 Ma) basaltic rocks distributed along the back-arc margin of the NE Japan arc over 500 km. These rocks are divided into higher TiO2 (> 1.5 wt.%; referred to as HT) and lower TiO2 (< 1.5 wt.%; LT) basalts. HT basalt has higher Na2O + K2O, HFSE and LREE, Zr/Y, and La/Yb compared to LT basalt. Both suite rocks show a wide range in Sr and Nd isotopic compositions (initial 87Sr/86Sr (SrI) = 0.70389 to 0.70631, initial 143Nd/144Nd(NdI) = 0.51248 to 0.51285). There is no any systematic variation amongst the studied Early Miocene basaltic rocks in terms of Sr–Nd isotope or Na2O + K2O and K2O abundances, across three volcanic zones from the eastern through transitional to western volcanic zone, but we can identify gradual increases in SrI and decreases in NdI from north to south along the back-arc margin of the NE Japan arc. Based on high field strength element, REE, and Sr–Nd isotope data, Early Miocene basaltic rocks of the NE Japan back-arc margin represent mixing of the asthenospheric mantle-derived basalt magma with two types of basaltic magmas, HT and LT basaltic magmas, derived by different degrees of partial melting of the subcontinental lithospheric mantle composed of garnet-absent lherzolite, with a gradual decrease in the proportion of asthenospheric mantle-derived magma from north to south. These mantle events might have occurred in association with rifting of the Eurasian continental arc during the pre-opening stage of the Japan Sea.  相似文献   

18.
One characteristic of many subduction-zone garnet peridotites is that they contain titanium-bearing phases not otherwise found in mantle rocks. In particular, titanoclinohumite and/or its breakdown assemblage consisting of symplectic intergrowths of olivine and ilmenite is common in many of these bodies. The Alpe Arami garnet lherzolite of the Swiss Alps, while lacking titanoclinohumite, displays instead large numbers of FeTiO3 rod-shaped precipitates in the oldest generation of olivine, amounting to approximately 1% by volume, indicating that at some time in its past, the peridotite experienced conditions under which the solubility of TiO2 in olivine was >0.6 wt.%. In order to test the hypothesis that the environment of very high solubility of TiO2 in olivine is to be found at very high pressures, we have conducted experiments on lherzolite compositions with added ilmenite at pressures between 5 and 12 GPa and temperatures of 1350–1700 K. Our results on anhydrous compositions show that whereas solubility of TiO2 was not detected in olivine at 5 GPa, 1400 K where it coexists with rutile, when rutile disappeared from the paragenesis, the solubility climbed to 0.4 wt.% at 8 GPa, 0.5 wt.% at 10 GPa and to >1.0 wt.% at 12 GPa, 1700 K. These results support our previous interpretations from titanate morphology and abundance that the Alpe Arami massif has surfaced from P=10 GPa but remove the need to suggest a deeper origin and possible precursor phase such as wadsleyite. They also support the hypothesis that garnet peridotites with unusual Ti-bearing phases reflect a unique mantle environment occurring in the mantle wedge overlying subduction zones.  相似文献   

19.
Three types of fluid inclusions have been identified in olivine porphyroclasts in the spinel harzburgite and lherzolite xenoliths from Tenerife: pure CO2 (Type A); carbonate-rich CO2–SO2 mixtures (Type B); and polyphase inclusions dominated by silicate glass±fluid±sp±silicate±sulfide±carbonate (Type C). Type A inclusions commonly exhibit a “coating” (a few microns thick) consisting of an aggregate of a platy, hydrous Mg–Fe–Si phase, most likely talc, together with very small amounts of halite, dolomite and other phases. Larger crystals (e.g. (Na,K)Cl, dolomite, spinel, sulfide and phlogopite) may be found on either side of the “coating”, towards the wall of the host mineral or towards the inclusion center. These different fluids were formed through the immiscible separations and fluid–wall-rock reactions from a common, volatile-rich, siliceous, alkaline carbonatite melt infiltrating the upper mantle beneath the Tenerife. First, the original siliceous carbonatite melt is separated from a mixed CO2–H2O–NaCl fluid and a silicate/silicocarbonatite melt (preserved in Type A inclusions). The reaction of the carbonaceous silicate melt with the wall-rock minerals gave rise to large poikilitic orthopyroxene and clinopyroxene grains, and smaller neoblasts. During the metasomatic processes, the consumption of the silicate part of the melt produced carbonate-enriched Type B CO2–SO2 fluids which were trapped in exsolved orthopyroxene porphyroclasts. At the later stages, the interstitial silicate/silicocarbonatite fluids were trapped as Type C inclusions. At a temperature above 650 °C, the mixed CO2–H2O–NaCl fluid inside the Type A inclusions were separated into CO2-rich fluid and H2O–NaCl brine. At T<650 °C, the residual silicate melt reacted with the host olivine, forming a reaction rim or “coating” along the inclusion walls consisting of talc (or possibly serpentine) together with minute crystals of NaCl, KCl, carbonates and sulfides, leaving a residual CO2 fluid. The homogenization temperatures of +2 to +25 °C obtained from the Type A CO2 inclusions reflect the densities of the residual CO2 after its reactions with the olivine host, and are unrelated to the initial fluid density or the external pressure at the time of trapping. The latter are restricted by the estimated crystallization temperatures of 1000–1200 °C, and the spinel lherzolite phase assemblage of the xenolith, which is 0.7–1.7 GPa.  相似文献   

20.
The abundance of apatite in Phanerozoic mantle may be greatly underestimated. This study shows that apatite has a widespread occurrence in Phanerozoic lithospheric mantle and can be divided into two geochemically distinct types using halogen content, presence or absence of structural CO2, Sr and trace element (especially U, Th, and light rare earth) ratios and abundances, and association with either metasomatised mantle wall-rock peridotites (Apatite A) or high-pressure magmatic crystallisation products (Apatite B). Apatite A is inferred to result from metasomatism by CO2- and H2O-rich fluids derived from a primitive mantle source region, while Apatite B compositions are consistent with crystallisation from magmas within the carbonate–silicate compositional spectrum.

The presence of significant apatite in the lithospheric mantle is important not only for the geochemical budget but also for assessing heat production and heat flow in the mantle. The measured U and Th contents of mantle apatite average 60 and 200 ppm, respectively and 0.5% apatite would dominate heat production. Metasomatised mantle may also contain amphibole and mica with K2O and clinopyroxene with detectable U and Th. In lithospheric mantle with a thickness of 70 km, this abundance of apatite would result in mantle heat flow contribution of about 12 mW/m2, a significant proportion of the total “normal” mantle heat flow of about 18 mW/m2.  相似文献   


设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号