首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Intracratonic South Rewa Gondwana Basin occupies the northern part of NW–SE trending Son–Mahanadi rift basin of India. The new gravity data acquired over the northern part of the basin depicts WNW–ESE and ENE–WSW anomaly trends in the southern and northern part of the study area respectively. 3D inversion of residual gravity anomalies has brought out undulations in the basement delineating two major depressions (i) near Tihki in the north and (ii) near Shahdol in the south, which divided into two sub-basins by an ENE–WSW trending basement ridge near Sidi. Maximum depth to the basement is about 5.5 km within the northern depression. The new magnetic data acquired over the basin has brought out ENE–WSW to E–W trending short wavelength magnetic anomalies which are attributed to volcanic dykes and intrusive having remanent magnetization corresponding to upper normal and reverse polarity (29N and 29R) of the Deccan basalt magnetostratigrahy. Analysis of remote sensing and geological data also reveals the predominance of ENE–WSW structural faults. Integration of remote sensing, geological and potential field data suggest reactivation of ENE–WSW trending basement faults during Deccan volcanism through emplacement of mafic dykes and sills. Therefore, it is suggested that South Rewa Gondwana basin has witnessed post rift tectonic event due to Deccan volcanism.  相似文献   

2.
《Geodinamica Acta》2003,16(2-6):131-147
Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.  相似文献   

3.
The NW–SE shortening between the African and the Eurasian plates is accommodated in the eastern Betic Cordillera along a broad area that includes large N‐vergent folds and kilometric NE–SW sinistral faults with related seismicity. We have selected the best exposed small‐scale tectonic structures located in the western Huércal‐Overa Basin (Betic Cordillera) to discuss the seismotectonic implications of such structures usually developed in seismogenic zones. Subvertical ESE–WNW pure dextral faults and E–W to ENE–ESW dextral‐reverse faults and folds deform the Quaternary sediments. The La Molata structure is the most impressive example, including dextral ESE–WNW Neogene faults, active southward‐dipping reverse faults and associated ENE–WSW folds. A molar M1 assigned to Mimomys savini allows for precise dating of the folded sediments (0.95–0.83 Ma). Strain rates calculated across this structure give ～0.006 mm a?1 horizontal shortening from the Middle Pleistocene up until now. The widespread active deformations on small‐scale structures contribute to elastic energy dissipation around the large seismogenic zones of the eastern Betics, decreasing the seismic hazard of major fault zones. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.  相似文献   

5.
Many types of hydrothermal deposits (e.g. W, Bi, Pb, Zn, Ag) are confined by faults and hidden granodiorite in the Luowei Orefield in Xidamingshan, Guangxi, China. The orebodies in the Luowei W–Bi deposit are predominantly layered and distributed along bedding in sandstones of the Cambrian Xiaoneichong Formation. The orebodies in the Lujing Pb–Zn deposit are controlled mainly by west‐south‐west (WSW)‐trending faults, and those in the Fenghuangshan Ag deposit are controlled mainly by west‐north‐west (WNW)‐trending faults, which were reverse faults during mineralization and were later reactivated as sinistral strike‐slip faults. The Luowei fault was formed postmineralization and resulted in sinistral displacement of the subsurface granodiorite and the Cambrian strata. A tectonomagmatic mineralization model of the Luowei Orefield is proposed, and the following conclusions were made. (i) Under a regional N–S compressive stress regime, WSW‐ and WNW‐trending reverse faults and N–S‐trending tensional fractures were formed. (ii) Magma intruded along the tensional fractures. Under the force of magmatic thermodynamics, mineralizing fluid migrated along bedding planes in sandstones and formed W–Bi orebodies at favorable sites. Some fluid migrated along WSW‐ and WNW‐trending faults to sites farther from the magma source, forming vein‐type Pb–Zn and Ag orebodies. (iii) After mineralization, under ~E–W compression, a NW‐trending left‐lateral slip fault was formed, cutting the subsurface granodiorite and orebodies. Concurrently, sinistral shear slip occurred on WNW‐trending ore‐controlling faults. However, the small displacement on these faults did not change the overall distributions of the rock mass and orebodies.  相似文献   

6.
Kh. S. Zaky 《Geotectonics》2017,51(6):625-652
Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and SHmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The SHmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.  相似文献   

7.
Qiongdongnan Basin is a Cenozoic rift basin located on the northern passive continental margin of the South China Sea. Due to a lack of geologic observations, its evolution was not clear in the past. However, recently acquired 2-D seismic reflection data provide an opportunity to investigate its tectonic evolution. It shows that the Qiongdongnan Basin comprises a main rift zone which is 50–100 km wide and more than 400 km long. The main rift zone is arcuate in map view and its orientation changes from ENE–WSW in the west to nearly E–W in the east. It can be divided into three major segments. The generally linear fault trace shown by many border faults in map view implies that the eastern and middle segments were controlled by faults reactivated from NE to ENE trending and nearly E–W trending pre-existing fabrics, respectively. The western segment was controlled by a left-lateral strike-slip fault. The fault patterns shown by the central and eastern segments indicate that the extension direction for the opening of the rift basin was dominantly NW–SE. A semi-quantitative analysis of the fault cut-offs identifies three stages of rifting evolution: (1) 40.4–33.9 Ma, sparsely distributed NE-trending faults formed mainly in the western and the central part of the study area; (2) 33.9–28.4 Ma, the main rift zone formed and the area influenced by faulting was extended into the eastern part of the study area and (3) 28.4–20.4 Ma, the subsidence area was further enlarged but mainly extended into the flanking area of the main rift zone. In addition, Estimates of extensional strain along NW–SE-trending seismic profiles, which cross the main rift zone, vary between 15 and 39 km, which are generally comparable to the sinistral displacement on the Red River Fault Zone offshore, implying that this fault zone, in terms of sinistral motion, terminated at a location near the southern end of the Yinggehai Basin. Finally, these observations let us to favour a hybrid model for the opening of the South China Sea and probably the Qiongdongnan Basin.  相似文献   

8.
In this paper we assess two competing tectonic models for the development of the Isa Superbasin (ca 1725–1590 Ma) in the Western Fold Belt of the Mt Isa terrane. In the ‘episodic rift‐sag’ tectonic model the basin architecture is envisaged as similar to that of a Basin and Range province characterised by widespread half‐graben development. According to this model, the Isa Superbasin evolved during three stages of the Mt Isa Rift Event. Stage I involved intracontinental extension, half‐graben development, the emergence of fault scarps and tilt‐blocks, and bimodal volcanism. Stage II involved episodic rifting and sag during intervening periods of tectonic quiescence. Stage III was dominated by thermal relaxation of the lithosphere with transient episodes of extension. Sedimentation was controlled by the development of arrays of half‐grabens bounded by intrabasinal transverse or transfer faults. The competing ‘strike‐slip’ model was developed for the Gun Supersequence stratigraphic interval of the Isa Superbasin (during stage II and the beginning of stage III). According to this model, sinistral movements along north‐northeast‐orientated strike‐slip faults took place, with oblique movements along northwest‐orientated faults. This resulted in the deposition of southeast‐thickening ramp sequences with local sub‐basin depocentres forming to the west and north of north‐northeast‐ and northwest‐trending faults, respectively. It is proposed that dilation zones focused magmatism (e.g. Sybella Granite) and transfer of strike‐slip movement resulted in transient uplift along the western margin of the Mt Gordon Arch. Our analysis supports the ‘episodic rift‐sag’ model. We find that the inferred architecture for the strike‐slip model correlates poorly with the observed structural elements. Interpretation is made difficult because there has been significant modification and reorientation of fault geometry during the Isan Orogeny and these effects need to be removed before any assertion as to the basin structure is made. Strike‐slip faulting does not explain the regional‐scale pattern of basin subsidence. The ‘episodic rift‐sag’ model explains the macroscopic geometry of the Isa Superbasin and is consistent with the detailed sedimentological analysis of basin facies architecture, and the structural history and geometry.  相似文献   

9.
The El Sela area is a part of the basement complex of the Eastern Desert of Egypt and the Pan-African Shield. The area comprises outcrops of dismembered ophiolites thrust over arc volcano-sedimentary sequence and intruded by different syn- to post-tectonic granitoids. Structural analysis of the area enabled the separation and definition of four structural episodes: (E1) folding–thrusting episode associated with the cratonization of the arc/inter-arc rock association and the intrusion of the syntectonic (Older) granites. (E2) Upright folding episode associated with the compression and shortening to the ENE–WSW direction which is different from the NNW–SSE shortening direction during E1; at the end of E2, late tectonic granites were intruded. (E3) Post-tectonic granitic intrusion episode: two mica granite and granitic dikes were intruded during this episode. (E4) Fracturing, faulting, and post-granitic dike extrusion episodes caused different faults that took place after cratonization until the present. There are three generations of folds during ductile deformation (E1 and E2). The F2 folds are nearly coaxial (along ENE–WSW trend) with the F1 folds. The F3 folding is displayed by folds generally trending NNW–SSE. Therefore, the ENE–WSW and NNW–SSE trends can considered as preexisting discontinuities and mechanical anisotropy of the crust in the following structure episodes. Brittle deformation (E3 and E4) reveals the importance of those trends which control the multi-injections and many alteration features in the study area. During reactivation, a simple shear parallel to the inherited ductile fabrics was responsible for the development of mineralized structures along the ENE–WSW and NNW–SSE trends. So they can be considered as paleochannel trends for deep-seated structures and can act as a good trap for uranium and/or other mineral resources. Most of the uranium anomalies are delineated along ENE–WSW and NNW–SSE shear zones where quartz-bearing veins bounded the lamprophyre dike and microgranites and dissected them in relation to the successive fracturation and brecciation corresponding to the repeated rejuvenation of the structures. Therefore, the structural controls of the uranium mineralizations in the El Sela area appear to be related to the interaction between inherited ductile fabrics and overprinting brittle structures.  相似文献   

10.
The Bhuj earthquake (26 January 2001) in India and the Ghori earthquake (8 October 2005) in Pakistan, both occurred close to the Indian-Iranian plate boundary related to the activity along the intercontinental Chaman transform fault. It is suggested that the seismic activity along NNW — NNE trending weak zones or faults is more intense in the sub-continent than along the WNW trending zones. Since the stress along the former is less compressive but more of the shear or translational type. The devastative Koyna (1967) and Latur (1993) earthquakes both occurred along faults or weak zones that were close to the meridional rather than the equatorial trend. The Indian plate is moving to the north or NNE or NNW, along a rotational trajectory and hence the force tends to be more compressive along the equatorial weak zones. In contrast, it tends to be less compressive and more of the shear or translational along the weak zones that are close to meridional trend. The seismic activity is therefore more intense along the weak zones with NNW to NNE trend than along the ENE to EW trending zones.  相似文献   

11.
The easternmost sector of the Gulf of Corinth, the Beotia area in Central Greece, is an area with active normal faults located between the two major rift structures of Central Greece, the Gulf of Corinth and the North Gulf of Evia. These active normal faults include WNW to E–W and NE to ENE-trending faults affect the landscape and generate basin and range topography within the Beotia. We study four normal fault zones and drainage basin geometry in the easternmost sector of the Gulf of Corinth to document the impact of active tectonics on the landscape evolution. Fault and drainage geometry are investigated based on detailed field mapping and high-resolution digital elevation models. Tectonic geomorphic analysis using several parameters of active tectonics provides information concerning the relative tectonic activity and fault growth. In order to detect areas of lateral stream migration that could indicate recent tectonic activity, the Transverse Topographic Symmetry Factor and the Asymmetry Factor are used to analyse drainage basin geometry in six large drainage basins and a drainage domain covering the study area. Our results show that vertical motions and tilting associated with normal faulting influence the drainage geometry and its development. Values of stream-gradient indices (SL) are relatively high close to the fault traces of the studied fault zones suggesting high activity. Mountain-front sinuosity (Smf) mean values along the fault zones ranges from 1.08 to 1.26. Valley floor width to valley height ratios (Vf) mean values along the studied fault zones range between 0.5 and 1.6. Drainage basin shape (BS) mean values along the fault zones range from 1.08 to 3.54. All these geomorphic parameters and geomorphological data suggest that the analyzed normal faults are highly active. Lateral fault growth was likely produced by primarily eastward propagation, with the WNW to E–W trending faults being the relatively more active structures.  相似文献   

12.
黔西北五指山地区叠加构造变形特征对铅锌矿成矿的控制   总被引：1，自引：0，他引：1  
五指山铅锌矿区位于贵州省普定县与织金县交界区域,大地构造位于扬子板块中部、江南造山带西缘。野外构造研究表明,受早古生代加里东构造运动的控制与影响,矿区内震旦系—下古生界构造变形与上古生界—中生界的构造变形明显不同。震旦系—下古生界构造线近东西向,发育近东西向平缓褶皱、南倾或北倾劈理,显示近南北向的挤压收缩变形。震旦系—下古生界区内发育两组南北、北西向陡倾断层,断层明显受限制而不穿越晚古生代之后的地层。发育在震旦系—下古生界内的层间滑动与断层活动控制着铅锌矿的分布。晚古生代之后区域构造应力场发生转变,由早期近南北向的挤压收缩转为早燕山期SEE向NWW挤压逆冲,由此对震旦纪—早古生代变形进行叠加与改造,宏观上形成以NE走向为特征的区域构造格局。后期形成的褶皱轴面主要向SEE倾斜,断层向NWW逆冲,与早期变形呈斜跨式叠加。燕山期断层活动促进了铅锌矿的迁移与聚集。  相似文献   

13.
A similar succession of Foliation Inflection/Intersection Axis (FIAs) trends preserved within porphyroblasts is present in two areas separated by 200 km along the Rocky Mountains. The Precambrian rocks in Central Colorado and Northern New Mexico were affected by deformation and metamorphism from ～1506 to 1366 Ma. A succession of five FIAs trending W–E, SSW–NNE, NNW–SSE, NW–SE and WSW–ENE is distinguished in Central Colorado and dated at 1506 ± 15 Ma, 1467 ± 23 Ma, 1425 ± 18 Ma, not dated and 1366 ± 20 Ma respectively. To the south in Northern New Mexico, a succession of five FIAs trending SSW–NNE, WNW–ESE, NNW–SSE, NW–SE and WSW–ENE is distinguished and dated at 1482 ± 48 Ma, 1448 ± 12 Ma, 1422 ± 35 Ma, not dated and 1394 ± 22 Ma. The excellent correlation of the sequence of FIA trends and their ages between regions reveals a sixfold‐FIA succession across the region with the first developed FIA set in Central Colorado not present in Northern New Mexico and the third FIA set in the region not present in Central Colorado. Preferential partitioning of W–E trending deformation into the Central Colorado region ～1506 ± 15 Ma was followed by SSW–NNE trending deformation that affected both regions at 1470 ± 20 Ma. However, preferential partitioning of WNW–ESE trending deformation into Northern New Mexico at 1448 ± 12 Ma left Central Colorado unaffected. Both regions were then affected by the three remaining periods of orogenesis, the first trending NNW–SSE at 1424 ± 15 Ma followed by one trending NW–SE that has not yet been dated, and then one trending WSW–ENE at 1390 ± 19 Ma. This suggests that the Yavapai terrane was tectonized at ～1506 Ma, prior to amalgamation with the Mazatzal terrane ～1470 Ma. Subsequent orogenesis was initially partitioned preferentially into the Mazatzal terrane, but the following three periods of tectonism affected both terranes in a similar manner.  相似文献   

14.
B. Sundvoll  B.T. Larsen   《Tectonophysics》1994,240(1-4):173-189
A revised assessment of architecture and pre-rift fabric connections of the Oslo Rift has been undertaken and linked to a new appraisal of observations and data related to the initial phase of the rift evolution. In addition to half-graben segmentation, accommodation zones and transfer faults are readily identified in the linking sectors between the two main grabens and between graben segments. Axial flexures are proposed between facing half-grabens. The accommodation zones were generally sites of volcanism during rifting. Pre-rift tectonic structures played an influential role in the rift location and development. The deviant N-S axis of the Vestfold graben segment is viewed as related to pre-rift structural control through faults and shear zones. This area was probably a site of Proterozoic/Palaeozoic crustal and lithospheric attenuation.

Field evidence suggests that the rift started as a crustal sag with no apparent surface faulting in a flat and low-lying land at a time about 305–310 Ma. Volcanism, sub-surface sill intrusion and faulting started about simultaneously some time after the initial sag (300–305 Ma). Faulting and basaltic volcanism were initially localized to transfer faults along accommodation zones and a NNW-SSE transtensional zone along the eastern margin of the incipient Vestfold graben segment. This transtensional zone was probably created by right-lateral simple shear tracing pre-rift structures in response to a regional stress field with the tensional axis normal and the maximum compressional axis parallel to the NNE-SSW-trending rift axis.  相似文献   


15.
The study area encompasses the Eastern Continental Margin of India (ECMI) and the adjoining deep water areas of Bay of Bengal. The region has evolved through multiple phases of tectonic activity and fed by abundant supply of sediments brought by prominent river systems of the Indian shield. Detailed analysis of total field magnetic and satellite-derived gravity data along with multi channel seismic reflection sections is carried out to decipher major tectonic features, basement structure, and the results have been interpreted in terms of basin configuration and play types for different deep water basins along the ECMI. Interpretation of various image enhanced gravity and magnetic anomaly maps suggest that in general, the ENE–WSW trending faults dominate the structural configuration at the margin. These maps also exhibit a clear density transition from the region of attenuated continental crust/proto oceanic crust to oceanic crust based on which the Continent Ocean Boundary (COB) has been demarcated along the margin. Basement depths estimated from magnetic data indicate that the values range from 1 to 12 km below sea level and deepen towards the Bengal Fan in the north and reveal horst–graben features related to rifting. A comparison of basement depths derived from seismic data indicates that in general, the basement trends and depths are comparable in Cauvery and Krishna–Godavari basins, whereas, in the Mahanadi basin, basement structure over the 85°E ridge is clearly revealed in seismic data. Further, eight multichannel seismic sections across different basins of the margin presented here reveal fault pattern, rift geometries and depositional trends related to canyon fills and channel–levee systems and provide a basic framework for future petroleum in this under explored frontier.  相似文献   

16.
The Indosinian Orogeny in Thailand is often viewed as having developed between strongly linear terranes, which today trend approximately N–S. The terranes were subsequently disrupted by later tectonics, particularly NW–SE trending Cenozoic strike-slip faults. The ENE–WSW to NE–SW striking thrusts and folds in the Khao Khwang Platform area of the Saraburi Group on the SW margin of the Indochina Terrane are not easily explained in the context of this traditional view. Reversal of the clockwise rotation shown to have affected the block north of the Mae Ping Fault zone only enhances the E–W orientation of structures in the fold and thrust belt, and moves the belt further east towards Cambodia. One solution for the trend that fits better with regional understanding from hydrocarbon exploration of the Khorat Plateau is that the Indochina Terrane was actually a series of continental blocks, separated by Permian rifting. During the Early Triassic the early stages of collision (South China-Cathaysian Terrane collision with Vietnam Indochina) resulted in the amalgamation of disparate blocks that now form the Indochina Terrane by closure along the rifts. At the same time or following on from the collision there was closure of the back-arc area between Indochina and the Sukhothai zone. The rift basins, were thrusted and inverted during the early stages of the Indosinian orogeny, and only underwent minor reactivated when later Sibumasu collided with Sukhothai Zone-Indochina Terrane margin during the Late Triassic. The scenario described above requires the presence of a (minor) E–W trending suture in NW Cambodia. Evidence for this suture is suggested by the presence of Permo-Triassic calc-alkaline volcanism.  相似文献   

17.
The tectonic effects of the Thulean mantle plume on the opening of the North Atlantic Ocean is still poorly understood. An analysis of the brittle deformation affecting the Late Cretaceous Chalk and Lower Tertiary igneous formations cropping out in Ulster (Northern Ireland), part of the Thulean Province, leads to the recognition of two tectonic phases. Each of these phases is characterized by different stress regimes with similar trends of the horizontal maximum principal stress σH. The first phase, syn-magmatic and dominated by NE–SW to ENE–WSW extension, occurred during the Palaeocene. It is followed by a second post-magmatic phase, characterized initially by a probably Eocene strike-slip to compressional palaeo-stress regime with σ1 (=σH) trending NE–SW to NNE–SSW associated with the partial reactivation (as reverse faults) of normal faults formed during the first phase NE–SW extension. This episode is postdated by an Oligocene extension, with σH (=σ2) still striking NNE–SSW/NE–SW, which reactivated Eocene strike-slip faults as nearly vertical dip-slip normal faults. This Palaeogene tectonic evolution is consistent with the tectonic evolution of similar age in western Scotland and in the Faeroe Islands. In particular, the post-magmatic NE–SW compression is here related to the ‘Faeroe compressive event’, which is related to the earliest stages of drift of the Greenland plate.  相似文献   

18.
Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D1, D2, and D3) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D1 deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D2 deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D2 led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D3 deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.  相似文献   

19.
During the deformation of continental blocks, the magnitude of tectonic stress generally decreases with increasing distance from the margin of the block. However, the timing and kinematics of stress transmission from the margins to the interiors of continents are poorly resolved, even though this information is critical to our understanding of the dynamics of continental deformation. Here, we present a case study of Mesozoic deformation of the North China Craton (NCC). Field investigations of Mesozoic thrust faults and folds, granitic intrusions and dykes, combined with zircon SHRIMP and LA–ICP–MS dating and muscovite 40Ar/39Ar plateau ages, reveal the age of the NE–SW‐trending tectonic belts as ~180–155 Ma, where the deformation of the craton margin occurred 10–20 Ma earlier than that of the craton's interior. Although the kinematics of deformation are similar for the interior and the margin of the NCC, strain decreases with increasing distance from the margin. Notably, the bulk of the strain in the cratonic interior was focused in zones of pre‐existing weakness. Overall, we determined that the NCC deformed under conditions of uniaxial compression, a conclusion that is compatible with simple rheological models, and that the stress magnitude attained in the cratonic interior was much less than that along its margin.  相似文献   

20.
Integrated studies based on tectonic, seismotectonic and geomorphological analyses indicate that Normandy (northwest France) has been an active area during the Quaternary. Topography and landform discontinuities reflect the dislocation and differential uplift of a late Cenozoic platform. The tectonic activity is represented by (i) active faults, indicated by linear scarps and seismic activity, (ii) offsetting of pre‐existing surfaces, (iii) Plio‐Pleistocene sedimentation restricted within narrow subsiding zones, and (iv) morphometric properties of drainage basins that indicate zones of differential uplift. The inferred strain pattern involves (i) a shortening direction that strikes NW–SE as expected in the European context of Alpine compression, and (ii) a NE–SW trending extension accommodated by NW–SE normal faults. The geomorphological systems encountered in Normandy preferentially record differential vertical displacements. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号