共查询到20条相似文献,搜索用时 226 毫秒
1.
孵漂石地层大口径钻头与钻进工艺的选择 总被引:2,自引:1,他引:2
根据工程实例,通过钻头和钻进工艺的对比试验,得出了利用大直径滚刀钻头,在致密卵漂石地层施工中大口径桩孔,能大幅度提高钻进效率。 相似文献
2.
在施工一眼深度300 m的供水井中,为解决大厚度漂砾石地层中钻进施工难度大的问题,采用气举反循环钻进工艺,配合大口径牙轮钻头钻进一次成井的方法,取得了较好的效果。 相似文献
3.
针对在大口径瓦斯排放孔或大口径矿山应急救援钻孔施工中要求时间较短,而应用常规组合牙轮钻头或组合滚刀钻头施工时,由于钻孔口径较大,钻杆柱与钻孔环状间隙大,钻井液上返速度很慢,排除岩粉困难,钻进效率低的问题,以国内外反向钻进用牙轮钻头或滚刀钻头为基础,参考非开发回拖式扩孔钻进的施工经验,研发了集束式反井气动潜孔锤钻进工艺。在内蒙古黄玉川大口径煤矿排水孔施工的经验表明,在钻穿巷道顶板的大口径钻孔施工时,集束式反井气动潜孔锤及反井钻进工艺取代常规组合滚刀反井钻进工艺,可以大大提高了钻进效率,对类似钻孔的施工有很好的参考价值。 相似文献
4.
通过隧道穿越已有公路进行大管棚支护施工的工程实例,说明采用偏心扩孔钻头跟管钻进的成孔工艺,是解决大管棚支护施工中钻进成孔难的有效方法.介绍了成孔工艺、配套设备及相关技术措施. 相似文献
5.
在钻孔罐注桩施工中,采用泵吸反循环钻进工艺,使用的钻头常见的有翼状钻头、笼式钻头、牙轮钻头和滚刀钻头等。翼状钻头和笼式钻头用于钻进各类砂土层,牙轮钻头和滚刀钻头主要钻进基岩。与笼式钻头相比,翼状钻头在砂土层中钻进具有更好的犁切 相似文献
6.
结合洞庭湖地区大直径钻孔桩施工中遇到的糊钻、孔斜、漏失等问题,论述了一些有针对性的有效措施:螺旋状阶梯翼板钻头、正反循环相结合钻进工艺、双环导正器、平水位钻进等。 相似文献
7.
从设备安装,管路密封,泥浆性能,钻头结构,钻进参数,施工管理等方面,分析了用泵吸反循环钻进工艺施工钻孔灌注桩时循环流中的原因,提出了预防措施。 相似文献
8.
针对我国旋挖钻进施工中存在旋挖钻具与主机不匹配、钻具结构形式与地层不适应等问题,研究开发了BS系列旋挖钻斗和AG系列螺旋钻头两种新型的旋挖施工钻具。通过在青藏铁路冻土层基础桩施工中的应用,钻进平均时效达6~10 m/h,较进口同类型钻具提高2~4倍,解决了我国大口径基础桩冻土层施工的技术难题。 相似文献
9.
介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层,合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头,基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度,尾管长度,孔内空气流量与压力),摸索与总结出一套复杂地层成孔施工经验。 相似文献
10.
11.
Ivan V. BRAGIN Georgy A. CHELNOKOV Oleg V. CHUDAEV Natalia A. KHARITONOVA Sergey V. VYSOTSKIY 《《地质学报》英文版》2016,90(1):276-284
Studied waters belong to warm(T=30-50℃),alkaline(pH=8.9-9.3),low mineralized(TDS235 mg/1)Na-HCO_3 or Na-SO_4-HCO_3 thermal waters with high content of SiO_2(up to 81 mg/l)and F(up to 3.9 mg/1),occur on modern volcano-tectonic rejuvenated areas of Eastern Sikhote-Alin orogenic belt.Low~3He concentration as well as N_2/O_2 and N_2/Ar ratios exclude influence of deep mantle fluid.New rare earth element data constrain our understandmg of water-rock interaction occurring in the water source region.Meteoric origin of waters is proved by stable isotope values varying from-71‰to-136.1‰and from-10.8‰to-18.8‰forδ~2U andδ~(18)O respectively.REE patterns reflect high pH,resultfing from water-rock interaction and oxidative conditions.Calculations of deep aquifer temperature using Na-K and quartz geothermometers show 116.8-131.1°C and 82.2-125.8℃respectively.Presence of deep faults both with abnormal thermal gradient(~45-50 K/km)define unique geochemical shape of thermal waters of Sikhote-Alin,area,where no present volcanic activity is registered. 相似文献
12.
土压缩模量预测回归分析方法 总被引:1,自引:0,他引:1
在土压缩模量Es的分析计算中,常用的分析方法是根据土的e-p曲线试验资料建立公式求解,本文引入了数学上的回归分析方法来探讨Es与其它各项物理力学指标参数之间的相关关系,旨在找出对Es影响最显著的指标参数,并建立最优回归方程式,以此来预测Es。研究结果表明:该方法通用性强,应用范围广,亦可推广应用于其它相关领域。 相似文献
13.
Using the database of automatic hydrometeorological stations, installed in the Don RIver delta and Taganrog Bay seashore, the sources of the anomalois scale water negative surge and salinization of the Azov Sea under conditions of low river flow in 2015–2016 are studied. The new schemes of stratification and advection of salty sea waters in the Don River mouth under different weather conditions, water discharge and levels are given. 相似文献
14.
16.
17.
18.
Doklady Earth Sciences - Multiannual observations (2009–2017) by means of autonomous seiche recorders have been conducted for marine seiches with one second discreteness in the boot basin for... 相似文献
19.
《International Geology Review》2012,54(10):1218-1225
Copper deposits of Cuba belong to the Jurassic lead-zinc-copper, Cretaceous copper and Paleogene copper complexes, which differ substantially in their formation conditions. The island is differentiated into a number of metallogenic zones formed at the initial and early stages of the Cuba folded province. Pinar del Rio, Pinos, Trinidad and Oriente zones, of an intrageanticlinal nature, are prospective with respect to copper vein deposits of the lead-Zinc-copper complex. The Sasa and Cauto zones - intrageosynclinal - are prospective with regard to copper-pyrite and copper vein deposits of the Cretaceous complex. A metallogenic study of the island is indicated in planning the exploration of its copper prospects. -- AGI Staff. 相似文献