首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
The 1909 Benavente (Portugal) earthquake: search for the source   总被引：1，自引：0，他引：1  
The Lower Tagus River Valley has been affected by severe earthquakes comprising distant events, as in 1755, and local earthquakes, as in 1344, 1531, and 1909. The 1909 earthquake was located NE of Lisbon, near Benavente, causing serious damage and many losses. Mw 6.0 has been assessed for this earthquake and a reverse faulting focal mechanism solution has been calculated. Poor epicenter location, possible directivity and site effects, low fault slip rates, and the thick Cenozoic sedimentary cover make difficult correlation with regional structures. The focal mechanism indicates an ENE reverse fault as source, though it does not match any outcropping active structure suggesting that the event could have been produced by a blind thrust beneath the Cenozoic sedimentary fill. Hidden sources, inferred from seismic reflection data, are a possible NE structure linking the Vila Franca de Xira and the Azambuja faults, or the southern extension of the later. Evidence of surface rupturing is inhibited by the thick Holocene alluvial cover and the high fluvial sedimentation rate, though a slightly depressed area was identified in the Tagus alluvial plain W of Benavente which was investigated as possible geomorphic evidence of co-seismic surface deformation. A high-resolution seismic reflection profile was acquired across a 0.5 m high scarp at this site, and two trenches were opened across the scarp for paleoseismic research. Some deformation of dubious tectonic origin was found, requiring further studies.  相似文献   

2.
During late May and early June of 1993, we conducted two shallow, high-resolution seismic reflection surveys (Mini-Sosie method) across the southern escarpment of the Benton Hills segment of Crowleys Ridge. The reflection profiles imaged numerous post-late Cretaceous faults and folds. We believe these faults may represent a significant earthquake source zone.

The stratigraphy of the Benton Hills consists of a thin, less than about 130 m, sequence of mostly unconsolidated Cretaceous, Tertiary and Quaternary sediments which uncomfortably overlie a much thicker section of Paleozoic carbonate rocks. The survey did not resolve reflectors within the upper 75–100 ms of two-way travel time (about 60–100 m), which would include all of the Tertiary and Quaternary and most of the Cretaceous. However, the Paleozoic-Cretaceous unconformity (Pz) produced an excellent reflection, and locally a shallower reflector within the Cretaceous (K) was resolved. No coherent reflections below about 200 ms of two-way travel time were identified.

Numerous faults and folds, which clearly offset the Paleozoic-Cretaceous unconformity reflector, were imaged on both seismic reflection profiles. Many structures imaged by the reflection data are coincident with the surface mapped locations of faults within the Cretaceous and Tertiary succession. Two locations show important structures that are clearly complex fault zones. The English Hill fault zone, striking N30°–35°E, is present along Line 1 and is important because earlier workers indicated it has Pleistocene Loess faulted against Eocene sands. The Commerce fault zone striking N50°E, overlies a major regional basement geophysical lineament, and is present on both seismic lines at the southern margin of the escarpment.

The fault zones imaged by these surveys are 30 km from the area of intense microseismicity in the New Madrid seismic zone (NMSZ). If these are northeast and north-northeast oriented fault zones like those at Thebes Gap they are favorably oriented in the modern stress field to be reactivated as right-lateral strike slip faults. Currently, earthquake hazards assessments are most dependent upon historical seismicity, and there are little geological data available to evaluate the earthquake potential of fault zones outside of the NMSZ. We anticipate that future studies will provide evidence that seismicity has migrated between fault zones well beyond the middle Mississippi Valley. The potential earthquake hazards represented by faults outside the NMSZ may be significant.  相似文献   


3.
The evolution of the seismogenic process associated with the Ms 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (Ms=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.  相似文献   

4.
The Great Lisbon earthquake of 1755 with an estimated magnitude of 8.5–9.0 is the most destructive earthquake in European history, yet the source region remains enigmatic. Recent geophysical data provide compelling evidence for an active east dipping subduction zone beneath the nearby Gibraltar Arc. Marine seismic data in the Gulf of Cadiz image active thrust faults in an accretionary wedge, above an east dipping decollement and an eastward dipping basement. Tomographic and other data support subduction and rollback of a narrow slab of oceanic lithosphere beneath the westward advancing Gibraltar block.Although, no instrumentally recorded seismicity has been documented for the subduction interface, we propose the hypothesis that this shallow east dipping fault plane is locked and capable of generating great earthquakes (like the Nankai or Cascadia seismogenic zones). We further propose this east dipping fault plane to be a candidate source for the Great Lisbon earthquake of 1755. In this paper we use all available geophysical data on the deep structure of the Gulf of Cadiz–Gibraltar region for the purpose of constraining the 3-D geometry of this potentially seismogenic fault plane. To this end, we use new depth processed seismic data, have interpreted all available published and unpublished time sections, examine the distribution of hypocenters and perform 2-D gravity modeling. Finally, a finite-element model of the forearc thermal structure is constructed to determine the temperature distribution along the fault interface and thus the thermally predicted updip and downdip limits of the seismogenic zone.  相似文献   

5.
This paper focuses on the recent tectonic evolution of the Bay of Naples with the aim of exploring the connection between local tectonics and volcanism. We reprocessed the seismic reflection dataset acquired in the area in the late 1973. The new processing was highly successful in obtaining a decisive strong reduction of random noise, removal of coherent noise and reduction of spatial aliasing. Classical interpretative schemes and complex attributes of seismic traces were used to reconstruct fault kinematics and reflector patterns. The results show that the faults affecting the Bay of Naples exhibit prevailing NE structural strikes, with the exception of the Pozzuoli Caldera where NW patterns are also common. Many faults are subvertical and show seismic evidence of volcanic activity along them. A main alignment of conjugate NE–SW faults, named here as “Magnaghi–Sebeto line”, intersects several submarine volcanic banks and separates the bay into two sectors, characterized by important geological, geophysical and petrochemical differences. The structural configuration of the bay may reflect the occurrence of either oblique extension or a transfer zone of the NW–SE fault system, along which, in the Campanian–Lucanian Apennine chain, great vertical displacements occur.  相似文献   

6.
The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene–Eocene transtension, Oligocene–Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed.  相似文献   

7.
We present a series of high-resolution seismic reflection lines across the Yizre'el valley, which is the largest active depression in Israel, off the main trend of the Dead Sea rift. The new seismic reflection data is of excellent quality and shows that the valley is dissected into numerous small blocks, separated by active faults. The Yizre'el valley is found to consist of a series of half grabens, rather than a single half graben, or a symmetrical graben. The faults are generally vertical and appear to have a dominant strike-slip component, but some dip-slip is also evident. A marked zone of compression near Megido is associated with the intersection of the two largest faults in the valley, the Carmel fault and the Gideon fault. Variable trend of the faults reflects the complexity of the local geology along the boundary between the wide NW–SE trending Farah–Carmel fault zone and the E–W trending basins and ranges in the Lower Galilee. This tectonic complexity is likely to result from a highly variable stress pattern, modified by the structures inside it. Normal faulting in the valley occurred at an early stage of its development as a tectonic depression. However, strike-slip motion on the Carmel fault, and possibly also on some of the other faults, appears to have started together with the onset of normal faulting. Earthquake hazard in the area appears to be uniform as faults are distributed throughout the Yizre'el valley.  相似文献   

8.
Questions persist concerning the earthquake potential of the populous and industrial Lake Ontario (Canada–USA) area. Pertinent to those questions is whether the major fault zone that extends along the St. Lawrence River valley, herein named the St. Lawrence fault zone, continues upstream along the St. Lawrence River valley at least as far as Lake Ontario or terminates near Cornwall (Ontario, Canada)–Massena (NY, USA). New geological studies uncovered paleotectonic bedrock faults that are parallel to, and lie within, the projection of that northeast-oriented fault zone between Cornwall and northeastern Lake Ontario, suggesting that the fault zone continues into Lake Ontario. The aforementioned bedrock faults range from meters to tens of kilometers in length and display kinematically incompatible displacements, implying that the fault zone was periodically reactivated in the study area. Beneath Lake Ontario the Hamilton–Presqu'ile fault lines up with the St. Lawrence fault zone and projects to the southwest where it coincides with the Dundas Valley (Ontario, Canada). The Dundas Valley extends landward from beneath the western end of the lake and is marked by a vertical stratigraphic displacement across its width. The alignment of the Hamilton–Presqu'ile fault with the St. Lawrence fault zone strongly suggests that the latter crosses the entire length of Lake Ontario and continues along the Dundas Valley.The Rochester Basin, an east–northeast-trending linear trough in the southeastern corner of Lake Ontario, lies along the southern part of the St. Lawrence fault zone. Submarine dives in May 1997 revealed inclined layers of glaciolacustrine clay along two different scarps within the basin. The inclined layers strike parallel to the long dimension of the basin, and dip about 20° to the north–northwest suggesting that they are the result of rigid-body rotation consequent upon post-glacial faulting. Those post-glacial faults are growth faults as demonstrated by the consistently greater thickness, unit-by-unit, of unconsolidated sediments on the downthrown (northwest) side of the faults relative to their counterparts on the upthrown (southeast) side. Underneath the western part of Lake Ontario is a monoclinal warp that displaces the glacial and post-glacial sediments, and the underlying bedrock–sediment interface. Because of the post-glacial growth faults and the monoclinal warp the St. Lawrence fault zone is inferred to be tectonically active beneath Lake Ontario. Furthermore, within the lake it crosses at least five major faults and fault zones and coexists with other neotectonic structures. Those attributes, combined with the large earthquakes associated with the St. Lawrence fault zone well to the northeast of Lake Ontario, suggest that the seismic risk in the area surrounding and including Lake Ontario is likely much greater than previously believed.  相似文献   

9.
The study provides a regional seismic interpretation and mapping of the Mesozoic and Cenozoic succession of the Lusitanian Basin and the shelf and slope area off Portugal. The seismic study is compared with previous studies of the Lusitanian Basin. From the Late Triassic to the Cretaceous the study area experienced four rift phases and intermittent periods of tectonic quiescence. The Triassic rifting was concentrated in the central part of the Lusitanian Basin and in the southernmost part of the study area, both as symmetrical grabens and half-grabens. The evolution of half-grabens was particularly prominent in the south. The Triassic fault-controlled subsidence ceased during the latest Late Triassic and was succeeded by regional subsidence during the early Early Jurassic (Hettangian) when deposition of evaporites took place. A second rift phase was initiated in the Early Jurassic, most likely during the Sinemurian–Pliensbachian. This resulted in minor salt movements along the most prominent faults. The second phase was concentrated to the area south of the Nazare Fault Zone and resulted here in the accumulation of a thick Sinemurian–Callovian succession. Following a major hiatus, probably as a result of the opening of the Central Atlantic, resumed deposition occurred during the Late Jurassic. Evidence for Late Jurassic fault-controlled subsidence is widespread over the whole basin. The pattern of Late Jurassic subsidence appears to change across the Nazare Fault Zone. North of the Nazare Fault, fault-controlled subsidence occurred mainly along NNW–SSE-trending faults and to the south of this fault zone a NNE–SSW fault pattern seems to dominate. The Oxfordian rift phase is testified in onlapping of the Oxfordian succession on salt pillows which formed in association with fault activity. The fourth and final rift phase was in the latest Late Jurassic or earliest Early Cretaceous. The Jurassic extensional tectonism resulted in triggering of salt movement and the development of salt structures along fault zones. However, only salt pillow development can be demonstrated. The extensional tectonics ceased during the Early Cretaceous. During most of the Cretaceous, regional subsidence occurred, resulting in the deposition of a uniform Lower and Upper Cretaceous succession. Marked inversion of former normal faults, particularly along NE–SW-trending faults, and development of salt diapirs occurred during the Middle Miocene, probably followed by tectonic pulses during the Late Miocene to present. The inversion was most prominent in the central and southern parts of the study area. In between these two areas affected by structural inversion, fault-controlled subsidence resulted in the formation of the Cenozoic Lower Tagus Basin. Northwest of the Nazare Fault Zone the effect of the compressional tectonic regime quickly dies out and extensional tectonic environment seems to have prevailed. The Miocene compressional stress was mainly oriented NW–SE shifting to more N–S in the southern part.  相似文献   

10.
Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).  相似文献   

11.
Active faulting and seismic properties are re-investigated in the eastern precinct of the city of Thessaloniki (Northern Greece), which was seriously affected by two large earthquakes during the 20th century and severe damage was done by the 1759 event. It is suggested that the earthquake fault associated with the occurrence of the latest destructive 1978 Thessaloniki earthquake continues westwards to the 20-km-long Thessaloniki–Gerakarou Fault Zone (TGFZ), which extends from the Gerakarou village to the city of Thessaloniki. This fault zone exhibits a constant dip to the N and is characterised by a complicated geometry comprised of inherited 100°-trending faults that form multi-level branching (tree-like fault geometry) along with NNE- to NE-trending faults. The TGFZ is compatible with the contemporary regional N–S extensional stress field that tends to modify the pre-existing NW–SE tectonic fabric prevailing in the mountainous region of Thessaloniki. Both the 1978 earthquake fault and TGFZ belong to a ca. 65-km-long E–W-trending rupture fault system that runs through the southern part of the Mygdonia graben from the Strymonikos gulf to Thessaloniki. This fault system, here called Thessaloniki–Rentina Fault System (TRFS), consists of two 17–20-km-long left-stepping 100°-trending main fault strands that form underlapping steps bridged by 8–10-km-long ENE–WSW faults. The occurrence of large (M6.0) historical earthquakes (in 620, 677 and 700 A.D.) demonstrates repeated activation, and therefore the possible reactivation of the westernmost segment, the TGFZ, could be a major threat to the city of Thessaloniki. Changes in the Coulomb failure function (ΔCFF) due to the occurrence of the 1978 earthquake calculated out in this paper indicate that the TGFZ has been brought closer to failure, a convincing argument for future seismic hazard along the TGFZ.  相似文献   

12.
Crustal studies within the Japanese islands have provided important constraints on the physical properties and deformation styles of the island arc crust. The upper crust in the Japanese islands has a significant heterogeneity characterized by large velocity variation (5.5–6.1 km/s) and high seismic attenuation (Qp=100–400 for 5–15 Hz). The lateral velocity change sometimes occurs at major tectonic lines. In many cases of recent refraction/wide-angle reflection profiles, a “middle crust” with a velocity of 6.2–6.5 km/s is found in a depth range of 5–15 km. Most shallow microearthquakes are concentrated in the upper/middle crust. The velocity in the lower crust is estimated to be 6.6–7.0 km/s. The lower crust often involves a highly reflective zone with less seismicity, indicating its ductile rheology. The uppermost mantle is characterized by a low Pn velocity of 7.5–7.9 km/s. Several observations on PmP phase indicate that the Moho is not a sharp boundary with a distinct velocity contrast, but forms a transition zone from the upper mantle to the lower crust. Recent seismic reflection experiments revealed ongoing crustal deformations within the Japanese islands. A clear image of crustal delamination obtained for an arc–arc collision zone in central Hokkaido provides an important key for the evolution process from island arc to more felsic continental crust. In northern Honshu, a major fault system with listric geometry, which was formed by Miocene back arc spreading, was successfully mapped down to 12–15 km.  相似文献   

13.
Geological deformation in the northern New Madrid seismic zone, near Olmsted, Illinois (USA), is analyzed using integrated compressional-wave (P) and horizontally polarized-wave (SH) seismic reflection and regional and dedicated borehole information. Seismic hazards are of special concern because of strategic facilities (e.g., lock and dam sites and chemical plants on the Ohio River near its confluence with the Mississippi River) and because of alluvial soils subject to high amplification of earthquake shock. We use an integrated approach starting with lower resolution, but deeper penetration, P-wave reflection profiles to identify displacement of Paleozoic bedrock. Higher resolution, but shallower penetration, SH-wave images show deformation that has propagated upward from bedrock faults into Pleistocene loess. We have mapped an intricate zone more than 8 km wide of high-angle faults in Mississippi embayment sediments localized over Paleozoic bedrock faults that trend north to northeast, parallel to the Ohio River. These faults align with the pattern of epicenters in the New Madrid seismic zone. Normal and reverse offsets along with positive flower structures imply a component of strike-slip; the current stress regime favors right-lateral slip on northeast-trending faults. The largest fault, the Olmsted fault, underwent principal displacement near the end of the Cretaceous Period 65 to 70 million years ago. Strata of this age (dated via fossil pollen) thicken greatly on the downthrown side of the Olmsted fault into a locally subsiding basin. Small offsets of Tertiary and Quaternary strata are evident on high-resolution SH-wave seismic profiles. Our results imply recent reactivation and possible future seismic activity in a critical area of the New Madrid seismic zone. This integrated approach provides a strategy for evaluating shallow seismic hazard-related targets for engineering concerns.  相似文献   

14.
The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.  相似文献   

15.
Neogene rift system configuration for the back-arc of southwest Japan, southern rim of the Japan Sea, is argued on the basis of reflection seismic interpretation. Divergent rifting and subsequent contraction provoked by an arc–arc collisional event are manifested by the formation of faulted grabens and their inverted deformation, respectively. We identified the following four Cenozoic tectonic epochs as a decomposition process of the eastern Eurasian margin based on reliable paleomagnetic data: (1) Plate margin rearrangement on a regional left-lateral fault through southwest Japan and Sikhote Alin, which constituted a continuous geologic province before the early Tertiary differential motion; (2) Early Tertiary clockwise rotation (>20°) of the east Tan-Lu block relative to the North China block; (3) Oligocene to early Miocene divergent rifting and spreading of the Japan Sea, which divided southwest Japan from the east Tan-Lu block; (4) Middle Miocene bending and back-arc inversion of southwest Japan caused by collision with the Izu-Bonin arc. According to the estimation of relative motions during these events, a paleogeographic reconstruction is presented through Cenozoic time.  相似文献   

16.
In this study, we examined the subsurface structure in the vicinity of the active Atera fault beneath at least one monogenetic volcano that forms the Sakashita body of the Ueno basalts, central Japan. Microgravity and seismic reflection surveys over an area of about 3×3 km (horizontal)×1 km (vertical from surface) revealed that (1) a low-density body interpreted as the damaged zone of the Atera fault reaches a depth more than 200 m below sea level; and (2) a weak zone of crust that may exist about 1.5 km southwest of the Atera fault in a direction parallel to it. By combining the shape of the Sakashita body and (2), we propose that a dyke extending in a NW–SE direction with several vent alignments in the same direction may exist along this weak zone. This suggests that the studied area was governed in the NW–SE compressional and NE–SW extensional stress field when the Sakashita body formed.  相似文献   

17.
The Portland metropolitan area historically is the most seismically active region in Oregon. At least three potentially active faults are located in the immediate vicinity of downtown Portland, with the Portland Hills Fault (PHF) extending directly beneath downtown Portland. The faults are poorly understood, and the surface geologic record does not provide the information required to assess the seismic hazards associated with them. The limited geologic information stems from a surface topography that has not maintained a cumulative geologic record of faulting, in part, due to rapid erosion and deposition from late Pleistocene catastrophic flood events and a possible strike-slip component of the faults. We integrated multiple high-resolution geophysical techniques, including seismic reflection, ground penetrating radar (GPR), and magnetic methods, with regional geological and geophysical surveys to determine that the Portland Hills Fault is presently active with a zone of deformation that extends at least 400 m. The style of deformation is consistent with at least two major earthquakes in the last 12–15 ka, as confirmed by a sidehill excavation trench. High-resolution geophysical methods provide detailed images of the upper 100 m across the active fault zone. The geophysical images are critical to characterizing the structural style within the zone of deformation, and when integrated with a paleoseismic trench, can accurately record the seismic history of a region with little surface geologic exposure.  相似文献   

18.
Multichannel seismic reflection data acquired by Marine Arctic Geological Expedition (MAGE) of Murmansk, Russia in 1990 provide the first view of the geological structure of the Arctic region between 77–80°N and 115–133°E, where the Eurasia Basin of the Arctic Ocean adjoins the passive-transform continental margin of the Laptev Sea. South of 80°N, the oceanic basement of the Eurasia Basin and continental basement of the Laptev Sea outer margin are covered by 1.5 to 8 km of sediments. Two structural sequences are distinguished in the sedimentary cover within the Laptev Sea outer margin and at the continent/ocean crust transition: the lower rift sequence, including mostly Upper Cretaceous to Lower Paleocene deposits, and the upper post-rift sequence, consisting of Cenozoic sediments. In the adjoining Eurasia Basin of the Arctic Ocean, the Cenozoic post-rift sequence consists of a few sedimentary successions deposited by several submarine fans. Based on the multichannel seismic reflection data, the structural pattern was determined and an isopach map of the sedimentary cover and tectonic zoning map were constructed. A location of the continent/ocean crust transition is tentatively defined. A buried continuation of the mid-ocean Gakkel Ridge is also detected. This study suggests that south of 78.5°N there was the cessation in the tectonic activity of the Gakkel Ridge Rift from 33–30 until 3–1 Ma and there was no sea-floor spreading in the southernmost part of the Eurasia Basin during the last 30–33 m.y. South of 78.5°N all oceanic crust of the Eurasia Basin near the continental margin of the Laptev Sea was formed from 56 to 33–30 Ma.  相似文献   

19.
利用反射地震剖面处理过程中获取的叠加速度得到庐枞（庐江-枞阳）矿集区地壳浅部的速度结构剖面,为研究庐枞矿集区近地表-上地壳的结构提供了新依据。地震剖面综合研究表明：郯庐断裂、罗河-缺口断裂、长江断裂是庐枞地区的3条重要的断裂,断裂深部均表现为低速异常。罗河-缺口断裂、长江断裂的发育深度和规模均不及郯庐断裂。火山岩出露地区表现为地震波速高和反射波组凌乱的特征;新生代沉积地层则表现为波速低和反射波组连续的地球物理特征。罗河矿区位于强、弱反射转换区,同时也是低、高速体的转换区。  相似文献   

20.
利用反射地震剖面处理过程中获取的叠加速度得到庐枞(庐江-枞阳)矿集区地壳浅部的速度结构剖面,为研究庐枞矿集区近地表-上地壳的结构提供了新依据。地震剖面综合研究表明:郯庐断裂、罗河-缺口断裂、长江断裂是庐枞地区的3条重要的断裂,断裂深部均表现为低速异常。罗河-缺口断裂、长江断裂的发育深度和规模均不及郯庐断裂。火山岩出露地区表现为地震波速高和反射波组凌乱的特征;新生代沉积地层则表现为波速低和反射波组连续的地球物理特征。罗河矿区位于强、弱反射转换区,同时也是低、高速体的转换区。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号