首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract— The dimensions of large craters formed by impact are controlled to a large extent by gravity, whereas the volume of impact melt created during the same event is essentially independent of gravity. This “differential scaling” fosters size-dependent changes in the dynamics of impact-crater and basin formation as well as in the final morphologies of the resulting structures. A variety of such effects can be observed in the lunar cratering record, and some predictions can be made on the basis of calculations of impact melting and crater dimensions. Among them are the following: (1) as event magnitude increases, the volume of melt created relative to that of the crater will grow, and more will be retained inside the rim of the crater or basin. (2) The depth of melting will exceed the depth of excavation at diameters that essentially coincide with both the inflection in the depth-diameter trend and the simple-to-complex transition. (3) The volume of melt will exceed that of the transient cavity at a cavity diameter on the order of the diameter of the Moon; this would arguably correspond to a Moon-melting event. (4) Small lunar craters only rarely display exterior flows of impact melt because the relatively small volumes of melt created can become choked with clasts, increasing the melt's viscosity and chilling it rapidly. Larger craters and basins should suffer little from such a process. (5) Deep melting near the projectile's axis of penetration during larger events will yield a progression in central-structure morphology; with growing event magnitude, this sequence should range from single peaks through multiple peaks to peak rings. (6) The minimum depth of origin of central-peak material should coincide with the maximum depth of melting; the main central peak in a crater the size of Tycho should have had a preimpact depth of close to 15 km.  相似文献   

2.
Abstract— Impact cratering is an important geological process on Mars and the nature of Martian impact craters may provide important information as to the volatile content of the Martian crust. Terrestrial impact structures currently provide the only ground‐truth data as to the role of volatiles and an atmosphere on the impact‐cratering process. Recent advancements, based on studies of several well‐preserved terrestrial craters, have been made regarding the role and effect of volatiles on the impact‐cratering process. Combined field and laboratory studies reveal that impact melting is much more common in volatile‐rich targets than previously thought, so impact‐melt rocks, melt‐bearing breccias, and glasses should be common on Mars. Consideration of the terrestrial impact‐cratering record suggests that it is the presence or absence of subsurface volatiles and not the presence of an atmosphere that largely controls ejecta emplacement on Mars. Furthermore, recent studies at the Haughton and Ries impact structures reveal that there are two discrete episodes of ejecta deposition during the formation of complex impact craters that provide a mechanism for generating multiple layers of ejecta. It is apparent that the relative abundance of volatiles in the near‐surface region outside a transient cavity and in the target rocks within the transient cavity play a key role in controlling the amount of fluidization of Martian ejecta deposits. This study shows the value of using terrestrial analogues, in addition to observational data from robotic orbiters and landers, laboratory experiments, and numerical modeling to explore the Martian impact‐cratering record.  相似文献   

3.
Abstract— Approximately 130 terrestrial craters are currently known. They range up to 140 km, and perhaps as much as 200 km, in diameter and from Recent to ～2 billion years in age. The known sample, however, is highly biased to geologically young craters on the better known cratonic areas. The sample is also deficient in small (D < 20 km) craters compared to other planetary bodies. These biases are largely the result of active terrestrial geologic processes and their effects have to be considered when interpreting the record. The strength of the terrestrial cratering record lies in the availability of ground truth data, particularly on the structural and lithological nature of craters, which can be interpreted to understand and constrain large-scale impact processes. Some contributions include the definition of the concept of transient cavity formation and structural uplift during cratering events. Depths of excavation are poorly constrained, as very few terrestrial craters have preserved ejecta. Unlike their planetary counterparts, terrestrial impact craters are mostly recognized not by morphology but by the occurrence of characteristic shock metamorphic effects. Their study has led to models of shock wave attenuation and an understanding of the character and formation of various impact-lithologies, including impact melt rocks. They, in turn, aid in interpreting the nature of extraterrestrial samples, particularly samples from the lunar highlands. The recognition of diagnostic shock metamorphic effects and the signature of projectile contamination through geochemical anomalies in impact lithologies provide the basis for recognizing the impact signature in K/T boundary samples. The record also provides a basis for testing hypotheses of periodic cometary showers. Although inherently not suitable to define short wavelength periods in time due to relatively large uncertainties associated with crater ages, the current record shows no evidence of periodicity. Future directions in terrestrial impact studies will likely continue to focus on the K/T and related problems, including the recognition of other impact signatures in the stratigraphic record. Some emphasis will likely be given to the economic potential of craters and individual large structures, such as Sudbury, will provide an increasingly better understood context for interpreting planetary impact craters. To live up to the full potential of the record to constrain impact processes, however, more basic characterization studies are required, in addition to emphasis on topical areas of study.  相似文献   

4.
Abstract— The structure of Canadian impact craters formed in crystalline rocks is analyzed using shock metamorphism and evidence for movement along shear zones. The analysis is based on an interpretation that, beyond the near field region, shock pressure attenuates down axis as P ? R?2, in agreement with nuclear test and computed results, and as P ? R?3 near the surface. In both simple and complex craters, the transient cavity is defined by the limit of fragmentation due to direct and reflected shock waves. The intersection of the transient cavity with hemispheric shock isobars indicates that the transient cavity has a parabolic form. Weakening by dilation during early uplift allows late stage slumping of the walls of simple craters. This is controlled by a spheroidal primary shear of radius rs ～ 2dt, where dt is the depth of the transient crater due to excavation and initial compression. With increasing crater diameter, the size of the transient cavity decreases relative to the shock imprint, suggesting that fragmentation and excavation is limited by progressively earlier collapse of the margins under gravity. Central peak formation in complex craters may be initiated by relaxation of the shock‐compressed central parautochthone, so the primary shear, lubricated by friction melting, meets below the crater floor and drives the continuing upward motion.  相似文献   

5.
Abstract– The MEMIN research unit (Multidisciplinary Experimental and Modeling Impact research Network) is focused on analyzing experimental impact craters and experimental cratering processes in geological materials. MEMIN is interested in understanding how porosity and pore space saturation influence the cratering process. Here, we present results of a series of impact experiments into porous wet and dry sandstone targets. Steel, iron meteorite, and aluminum projectiles ranging in size from 2.5 to 12 mm were accelerated to velocities of 2.5–7.8 km s?1, yielding craters with diameters between 3.9 and 40 cm. Results show that the target’s porosity reduces crater volumes and cratering efficiency relative to nonporous rocks. Saturation of pore space with water to 50% and 90% increasingly counteracts the effects of porosity, leading to larger but flatter craters. Spallation becomes more dominant in larger‐scale experiments and leads to an increase in cratering efficiency with increasing projectile size for constant impact velocities. The volume of spalled material is estimated using parabolic fits to the crater morphology, yielding approximations of the transient crater volume. For impacts at the same velocity these transient craters show a constant cratering efficiency that is not affected by projectile size.  相似文献   

6.
2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.  相似文献   

7.
Shock-induced melting and vaporization of H2O ice during planetary impact events are widespread phenomena. Here, we investigate the mass of shock-produced liquid water remaining within impact craters for the wide range of impact conditions and target properties encountered in the Solar System. Using the CTH shock physics code and the new 5-phase model equation of state for H2O, we calculate the shock pressure field generated by an impact and fit scaling laws for melting and vaporization as a function of projectile mass, impact velocity, impact angle, initial temperature, and porosity. Melt production nearly scales with impact energy, and natural variations in impact parameters result in only a factor of two change in the predicted mass of melt. A fit to the π-scaling law for the transient cavity and transient-to-final crater diameter scaling are determined from recent simulations of the entire cratering process in ice. Combining melt production with π-scaling and the modified Maxwell Z-model for excavation, less than half of the melt is ejected during formation of the transient crater. For impact energies less than about 2 × 1020 J and impact velocities less than about 5 km s−1, the remaining melt lines the final crater floor. However, for larger impact energies and higher impact velocities, the phenomenon of discontinuous excavation in H2O ice concentrates the impact melt into a small plug in the center of the crater floor.  相似文献   

8.
Reta F. Beebe 《Icarus》1980,44(1):1-19
The simple-to-complex transition for impact craters on Mars occurs at diameters between about 3 and 8 km. Ballistically emplaced ejecta surround primarily those craters that have a simple interior morphology, whereas ejecta displaying features attributable to fluid flow are mostly restricted to complex craters. Size-dependent characteristics of 73 relatively fresh Martian craters, emphasizing the new depth/diameter (d/D) data of D. W. G. Arthur (1980, to be submitted for publication), test two hypotheses for the mode of formation of central peaks in complex craters. In particular, five features appear sequentially with increasing crater size: first flat floors (3–4 km), then central peaks and shallower depths (4–5 km), next scalloped rims (? km), and lastly terraced walls (～8 km). This relative order indicates that a shallow depth of excavation and an unspecified rebound mechanism, not centripetal collapse and deep sliding, have produced central peaks and in turn have facilitated failure of the rim. The mechanism of formation of a shallow crater remains elusive, but probably operates only at the excavation stage of impact. This interpretation is consistent with two separate and complementary lines of evidence. First, field data have documented only shallow subsurface deformation and a shallow transient cavity in complex terrestrial meteorite craters and in certain surface-burst explosion craters; thus the shallow transient cavities of complex craters never were geometrically similar to the deep cavities of simple craters. Second, the average depths of complex craters and the diameters marking the transition from simple to complex craters on Mars and on three other terrestrial planets vary inversely with gravitational acceleration at the planetary surface, g, a variable more important in the excavation of a crater than in any subsequent modification of its geometry. The new interpretation is summarized diagrammatically for complex craters on all planets.  相似文献   

9.
The terrestrial impact record contains currently ~145 structures and includes the morphological crater types observed on the other terrestrial planets. It has, however, been severely modified by terrestrial geologic processes and is biased towards young (≤ 200 Ma) and large (≥ 20 km) impact structures on relatively well-studied cratonic areas. Nevertheless, the ground-truth data available from terrestrial impact structures have provided important constraints for the current understanding of cratering processes. If the known sample of impact structures is restricted to a subsample in which it is believed that all structures ≥ 20 km in diameter (D) have been discovered, the estimated terrestrial cratering rate is 5.5±2.7 × 10?15km?2a?1 for D ≥ 20 km. This rate estimate is equivalent to that based on astronomical observations of Earth-crossing bodies. These rates are a factor of two higher, however, than the estimated post-mare cratering rate on the moon but the large uncertainties preclude definitive conclusions as to the significance of this observation. Statements regarding a periodicity in the terrestrial cratering record based on time-series analyses of crater ages are considered unjustified, based on statistical arguments and the large uncertainties attached to many crater age estimates. Trace element and isotopic analyses of generally siderophile group elements in impact lithologies, particularly impact melt rocks, have provided the basis for the identification of impacting body compositions at a number of structures. These range from meteoritic class, e.g., C-1 chondrite, to tentative identifications, e.g., stone?, depending on the quality and quantity of analytical data. The majority of the identifications indicate chondritic impacting bodies, particularly with respect to the larger impact structures. This may indicate an increasing role for cometary impacts at larger diameters; although, the data base is limited and some identifications are equivocal. To realize the full potential of the terrestrial impact record to constrain the character of the impact flux, it will be necessary to undertake additional and systematic isotopic and trace element analyses of impact lithologies at well-characterized terrestrial impact structures.  相似文献   

10.
The current morphology of the martian lithospheric magnetic field results from magnetization and demagnetization processes, both of which shaped the planet. The largest martian impact craters, Hellas, Argyre, Isidis and Utopia, are not associated with intense magnetic fields at spacecraft altitude. This is usually interpreted as locally non- or de-magnetized areas, as large impactors may have reset the magnetization of the pre-impact material. We study the effects of impacts on the magnetic field. First, a careful analysis is performed to compute the impact demagnetization effects. We assume that the pre-impact lithosphere acquired its magnetization while cooling in the presence of a global, centered and mainly dipolar magnetic field, and that the subsequent demagnetization is restricted to the excavation area created by large craters, between 50- and 500-km diameter. Depth-to-diameter ratio of the transient craters is set to 0.1, consistent with observed telluric bodies. Associated magnetic field is computed between 100- and 500-km altitude. For a single-impact event, the maximum magnetic field anomaly associated with a crater located over the magnetic pole is maximum above the crater. A 200-km diameter crater presents a close-to-1-nT magnetic field anomaly at 400-km altitude, while a 100-km diameter crater has a similar signature at 200-km altitude. Second, we statistically study the 400-km altitude Mars Global Surveyor magnetic measurements modelled locally over the visible impact craters. This approach offers a local estimate of the confidence to which the magnetic field can be computed from real measurements. We conclude that currently craters down to a diameter of 200 km can be characterized. There is a slight anti-correlation of −0.23 between magnetic field intensity and impact crater diameters, although we show that this result may be fortuitous. A complete low-altitude magnetic field mapping is needed. New data will allow predicted weak anomalies above craters to be better characterized, and will bring new constraints on the timing of the martian dynamo and on Mars’ evolution.  相似文献   

11.
Abstract– We present a case modeling study of impact crater formation in H2O‐bearing targets. The main goal of this work was to investigate the postimpact thermal state of the rock layers modified in the formation of hypervelocity impact craters. We present model results for a target consisting of a mixture of H2O‐ice and rock, assuming an ice/water content variable with depth. Our model results, combined with results from previous work using dry targets, indicate that for craters larger than about 30 km in diameter, the onset of postimpact hydrothermal circulation is characterized by two stages: first, the formation of a mostly dry, hot central uplift followed by water beginning to flow in and circulate through the initially dry and hot uplifted crustal rocks. The postimpact thermal field in the periphery of the crater is dependent on crater size: in midsize craters, 30–50 km in diameter, crater walls are not strongly heated in the impact event, and even though ice present in the rock may initially be heated enough to melt, overall temperatures in the rock remain below melting, undermining the development of a crater‐wide hydrothermal circulation. In large craters (with diameters more than 100 km or so), the region underneath the crater floor and walls is heated well above the melting point of ice, thus facilitating the onset of an extended hydrothermal circulation. These results provide preliminary constraints in characterizing the many water‐related features, both morphologic and spectroscopic, that high‐resolution images of Mars are now detecting within many Martian craters.  相似文献   

12.
The terrestrial impact record contains currently ~145 structures and includes the morphological crater types observed on the other terrestrial planets. It has, however, been severely modified by terrestrial geologic processes and is biased towards young ( 200 Ma) and large ( 20 km) impact structures on relatively well-studied cratonic areas. Nevertheless, the ground-truth data available from terrestrial impact structures have provided important constraints for the current understanding of cratering processes. If the known sample of impact structures is restricted to a subsample in which it is believed that all structures 20 km in diameter (D) have been discovered, the estimated terrestrial cratering rate is 5.5±2.7 × 10–15km–2a–1 for D 20 km. This rate estimate is equivalent to that based on astronomical observations of Earth-crossing bodies. These rates are a factor of two higher, however, than the estimated post-mare cratering rate on the moon but the large uncertainties preclude definitive conclusions as to the significance of this observation. Statements regarding a periodicity in the terrestrial cratering record based on time-series analyses of crater ages are considered unjustified, based on statistical arguments and the large uncertainties attached to many crater age estimates. Trace element and isotopic analyses of generally siderophile group elements in impact lithologies, particularly impact melt rocks, have provided the basis for the identification of impacting body compositions at a number of structures. These range from meteoritic class, e.g., C-1 chondrite, to tentative identifications, e.g., stone?, depending on the quality and quantity of analytical data. The majority of the identifications indicate chondritic impacting bodies, particularly with respect to the larger impact structures. This may indicate an increasing role for cometary impacts at larger diameters; although, the data base is limited and some identifications are equivocal. To realize the full potential of the terrestrial impact record to constrain the character of the impact flux, it will be necessary to undertake additional and systematic isotopic and trace element analyses of impact lithologies at well-characterized terrestrial impact structures.  相似文献   

13.
I.D.S. Grey 《Icarus》2004,168(2):467-474
Research on the impact cratering process on icy bodies has been largely based on the most abundant ice, water. However little is known about the influence of other relatively abundant ices such as ammonia. Accordingly, data are presented studying the influence on cratering in ammonia rich ice using spherical 1 mm diameter stainless steel projectiles at velocities of 4.8±0.5 km s−1. The ice target composition ranged from pure water ice, to solutions containing 50% ammonia and 50% water by weight. Results for crater depth, diameter, volume and depth/diameter ratio are given. The results showed that the presence of ammonia in the ice had a very strong influence on crater diameter and morphology. It was found that with only a 10% concentration of ammonia, crater diameter significantly decreased, and then at greater concentrations became independent of ammonia content. Crater depth was independent of the presence of ammonia in the ice, and the crater volume appeared to decrease as ammonia concentration increased. Between ammonia concentrations of 10 and 20% crater morphology visibly changed from wide shallow craters with a deeper central pit to craters with a smoothly increasing depth from the crater rim to centre. Thus, a small amount of ammonia within a water ice surface may have a major effect on crater morphology.  相似文献   

14.
Abstract— Imaging of asteroids Gaspra and Ida and laboratory studies of asteroidal meteorites show that impacts undoubtedly played an important role in the histories of asteroids and resulted in shock metamorphism and the formation of breccias and melt rocks. However, in recent years, impact has also been called upon by numerous authors as the heat source for some of the major geological processes that took place on asteroids, such as global thermal metamorphism of chondrite parent bodies and a variety of melting and igneous events. The latter were proposed to explain the origin of ureilites, aubrites, mesosiderites, the Eagle Station pallasites, acapulcoites, lodranites, and the IAB, IIICD, and HE irons. We considered fundamental observations from terrestrial impact craters, combined with results from laboratory shock experiments and theoretical considerations, to evaluate the efficiency of impact heating and melting of asteroids. Studies of terrestrial impact craters and relevant shock experiments suggest that impact heating of asteroids will produce two types of impact melts: (1) large-scale whole rock melts (total melts, not partial melts) at high shock pressure and (2) localized melts formed at the scale of the mineral constituents (mineral specific or grain boundary melting) at intermediate shock pressures. The localized melts form minuscule amounts of melt that quench and solidify in situ, thus preventing them from pooling into larger melt bodies. Partial melting as defined in petrology has not been observed in natural and experimental shock metamorphism and is thermodynamically impossible in a shock wave-induced transient compression of rocks. The total impact melts produced represent a minuscule portion of the displaced rock volume of the parent crater. Internal differentiation by fractional crystallization is absent in impact melt sheets of craters of sizes that can be tolerated by asteroids, and impact melt rocks are usually clast-laden. Thermal metamorphism of country rocks by impact is extremely minor. Experimental and theoretical considerations suggest that (1) single disruptive impacts cannot raise the average global temperature of strength- or gravity-dominated asteroids by more than a few degrees; (2) cumulative global heating of asteroids by multiple impacts is ineffective for asteroids less than a few hundred kilometers in diameter; (3) small crater size, low gravity, and low impact velocity suggest that impact melt volume in single asteroidal impacts is a very small (0.01–0.1%) fraction of the total displaced crater volume; (4) total impact melt volume formed during the typical lifetime of an asteroid is a small fraction (<0.001) of the volume of impact-generated debris; and (5) much of the impact melt generated on asteroidal targets is ejected from craters with velocities greater than escape velocity and, thus, not retained on the asteroid. The inescapable conclusion from these observations and calculations is that impacts cannot have been the heat source for the origin of the meteorite types listed above, and we must turn to processes other than impact, such as decay of short-lived radionuclides or electromagnetic induction during an early T-tauri phase of the Sun to explain heating and melting of the parent bodies of these meteorites.  相似文献   

15.
Abstract— We present numerical simulations of crater formation under Martian conditions with a single near‐surface icy layer to investigate changes in crater morphology between glacial and interglacial periods. The ice fraction, thickness, and depth to the icy layer are varied to understand the systematic effects on observable crater features. To accurately model impact cratering into ice, a new equation of state table and strength model parameters for H2O are fitted to laboratory data. The presence of an icy layer significantly modifies the cratering mechanics. Observable features demonstrated by the modeling include variations in crater morphometry (depth and rim height) and icy infill of the crater floor during the late stages of crater formation. In addition, an icy layer modifies the velocities, angles, and volumes of ejecta, leading to deviations of ejecta blanket thickness from the predicted power law. The dramatic changes in crater excavation are a result of both the shock impedance and the strength mismatch between layers of icy and rocky materials. Our simulations suggest that many of the unusual features of Martian craters may be explained by the presence of icy layers, including shallow craters with well‐preserved ejecta blankets, icy flow related features, some layered ejecta structures, and crater lakes. Therefore, the cratering record implies that near‐surface icy layers are widespread on Mars.  相似文献   

16.
Abstract— The Haughton impact structure has been the focus of systematic, multi‐disciplinary field and laboratory research activities over the past several years. Regional geological mapping has refined the sedimentary target stratigraphy and constrained the thickness of the sedimentary sequence at the time of impact to ?1880 m. New 40Ar–39Ar dates place the impact event at ?39 Ma, in the late Eocene. Haughton has an apparent crater diameter of ?23 km, with an estimated rim (final crater) diameter of ?16 km. The structure lacks a central topographic peak or peak ring, which is unusual for craters of this size. Geological mapping and sampling reveals that a series of different impactites are present at Haughton. The volumetrically dominant crater‐fill impact melt breccias contain a calcite‐anhydrite‐silicate glass groundmass, all of which have been shown to represent impact‐generated melt phases. These impactites are, therefore, stratigraphically and genetically equivalent to coherent impact melt rocks present in craters developed in crystalline targets. The crater‐fill impactites provided a heat source that drove a post‐impact hydrothermal system. During this time, Haughton would have represented a transient, warm, wet microbial oasis. A subsequent episode of erosion, during which time substantial amounts of impactites were removed, was followed by the deposition of intra‐crater lacustrine sediments of the Haughton Formation during the Miocene. Present‐day intra‐crater lakes and ponds preserve a detailed paleoenvironmental record dating back to the last glaciation in the High Arctic. Modern modification of the landscape is dominated by seasonal regional glacial and niveal melting, and local periglacial processes. The impact processing of target materials improved the opportunities for colonization and has provided several present‐day habitats suitable for microbial life that otherwise do not exist in the surrounding terrain.  相似文献   

17.
Abstract— We use Mars Orbiter Laser Altimeter (MOLA) topographic data and Thermal Emission Imaging System (THEMIS) visible (VIS) images to study the cavity and the ejecta blanket of a very fresh Martian impact crater ?29 km in diameter, with the provisional International Astronomical Union (IAU) name Tooting crater. This crater is very young, as demonstrated by the large depth/diameter ratio (0.065), impact melt preserved on the walls and floor, an extensive secondary crater field, and only 13 superposed impact craters (all 54 to 234 meters in diameter) on the ?8120 km2 ejecta blanket. Because the pre‐impact terrain was essentially flat, we can measure the volume of the crater cavity and ejecta deposits. Tooting crater has a rim height that has >500 m variation around the rim crest and a very large central peak (1052 m high and >9 km wide). Crater cavity volume (i.e., volume below the pre‐impact terrain) is ?380 km3 the volume of materials above the pre‐impact terrain is ?425 km3. The ejecta thickness is often very thin (<20 m) throughout much of the ejecta blanket. There is a pronounced asymmetry in the ejecta blanket, suggestive of an oblique impact, which has resulted in up to ?100 m of additional ejecta thickness being deposited down‐range compared to the up‐range value at the same radial distance from the rim crest. Distal ramparts are 60 to 125 m high, comparable to the heights of ramparts measured at other multi‐layered ejecta craters. Tooting crater serves as a fresh end‐member for the large impact craters on Mars formed in volcanic materials, and as such may be useful for comparison to fresh craters in other target materials.  相似文献   

18.
Because of the ubiquity of subsurface microbial life on Earth, examination of the subsurface of Mars could provide an answer to the question of whether microorganisms exist or ever existed on that planet. Impact craters provide a natural mechanism for accessing the deep substrate of Mars and exploring its exobiological potential. Based on equations that relate impact crater diameters to excavation depth we estimate the observed crater diameters that are required to prospect to given depths in the martian subsurface and we relate these depths to observed microbiological phenomena in the terrestrial subsurface. Simple craters can be used to examine material to a depth of ∼270 m. Complex craters can be used to reach greater depths, with craters of diameters ≥300 km required to reach depths of 6 km or greater, which represent the limit of the terrestrial deep subsurface biosphere. Examination of the ejecta blankets of craters between 17.5 and 260 km in diameter would provide insights into whether there is an extant, or whether there is evidence of an extinct, deep subsurface microbiota between 500 and 5000 m prior to committing to large-scale drilling efforts. At depths <500 m some crater excavations are likely to be more important than others from an exobiological point of view. We discuss examples of impacts into putative intracrater paleolacustrine sediments and regions associated with hydrothermal activity. We compare these depths to the characteristics of subsurface life on Earth and the fossil microbiological record in terrestrial impact craters.  相似文献   

19.
Peak-ring basins represent an impact-crater morphology that is transitional between complex craters with central peaks and large multi-ring basins. Therefore, they can provide insight into the scale dependence of the impact process. Here the transition with increasing crater diameter from complex craters to peak-ring basins on Mercury is assessed through a detailed analysis of Eminescu, a geologically recent and well-preserved peak-ring basin. Eminescu has a diameter (∼125 km) close to the minimum for such crater forms and is thus representative of the transition. Impact crater size-frequency distributions and faint rays indicate that Eminescu is Kuiperian in age, geologically younger than most other basins on Mercury. Geologic mapping of basin interior units indicates a distinction between smooth plains and peak-ring units. Our mapping and crater retention ages favor plains formation by impact melt rather than post-impact volcanism, but a volcanic origin for the plains cannot be excluded if the time interval between basin formation and volcanic emplacement was less than the uncertainty in relative ages. The high-albedo peak ring of Eminescu is composed of bright crater-floor deposits (BCFDs, a distinct crustal unit seen elsewhere on Mercury) exposed by the impact. We use our observations to assess predictions of peak-ring formation models. We interpret the characteristics of Eminescu as consistent with basin formation models in which a melt cavity forms during the impact formation of craters at the transition to peak ring morphologies. We suggest that the smooth plains were emplaced via impact melt expulsion from the central melt cavity during uplift of a peak ring composed of BCFD-type material. In this scenario the ringed cluster of peaks resulted from the early development of the melt cavity, which modified the central uplift zone.  相似文献   

20.
《Icarus》1987,70(3):517-535
The cratering record at Uranus shows two different crater populations of different ages. The old crater population occurs on the heavily cratered surfaces of Oberon, Umbriel, and Miranda, while the younger one is found on Titania, Ariel and the resurfaced areas of Miranda. Since only the young population occurs on Titania, this satellite must have experienced a global resurfacing event which obliterated the older population prior to the impact of objects causing the younger one. The old crater population is characterized by an abundance of large craters and a relative paucity of small ones. The young crater population, however, has an abundance of small craters and a paucity of large ones relative to the old population. Furthermore, the abundance of small craters and the paucity of large craters increases with decreasing density. This change in the size distribution is consistent with a population of impactors that evolved with time by mutual collision, and therefore was probably in planetocentric orbits. In fact, both crater populations may be the result of accretional remnants in planetocentric orbits that evolved with time by mutual collisions. If so, then the higher crater density on Miranda compared to Oberon and Umbriel suggests that both Oberon and Umbriel were also resurfaced early in their histories.A comparison of the Solar System cratering record from Mercury to Uranus (19 AU) shows different crater populations at different locations in the Solar System. Computer simulations using a modified Holsapple-Schmidt crater scaling and short-period comet impact velocities to recover the projectile diameters from the cratering record produce different projectile populations in different parts of the Solar System. Furthermore, adjusting the Jovian crater curve to match that in the inner Solar System requires differences in the impact velocities that are unrealistic for objects in heliocentric orbits. These results suggest that the Solar System cratering record cannot be explained by a single family of objects in heliocentric orbits, e.g., comets. One possible explanation is that the cratering record is the result of different families of objects (possibly accretional remnants) indigenous to that region of the Solar System in which the different crater populations are found. Thus, in the inner Solar System, the impactors responsible for heavy bombardment were in heliocentric orbits with semimajor axes less than 3 AU. In the outer Solar System, they may have been in planetocentric orbits around each of the Jovian planets.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号