共查询到20条相似文献，搜索用时 234 毫秒
1.
It is commonly accepted that collisional orogens involve the reactivation of former rifted margins. While it remains debated how rift inheritance can be identified and how it controls the architecture of orogens this case study analyses the importance of rift-inheritance during reactivation of a passive margin. The study analyses complex, non-layer cake rift structures within the well-exposed Err and Platta nappes (SE Switzerland), representing the former distal Adriatic margin of the Alpine Tethys. Diagnostic criteria for rift inheritance include: (1) typical fault rocks with a mantle derived fluid signature, and (2) tectono-sedimentary breccias made of reworked exhumed basement and grading upwards into late syn- and post-rift sediments. Based on the study of “recognisable” features, a methodology is etablished, which enables to (1) map rift-related detachment faults and (2) to analyse their role during reactivation and formation of a thrust stack. First, second and third order thrust systems are defined. First order thrust systems juxtapose different rift domains (proximal, necking, and distal). Second order systems are dominantly made up of basement sheets sampling the former footwall of an extensional detachment fault. Third order systems mainly consist of the former hanging wall of an extensional detachment fault. A major result of this study is that thrust faults commonly reactivate former extensional detachment faults, especially in the exhumed mantle domain (Platta nappe), while in the hyperextended domain (Err nappe) reactivation of rift-inherited structures is more complex and often incomplete. The results of this study may help to better identify remnants of former distal margins and to define and analyse their complex stacking patterns observed in many internal parts of collisional orogens. 相似文献
2.
Numerical experiments reproduce the fundamental architecture of magma-poor rifted margins such as the Iberian or Alpine margins
if the lithosphere has a weak mid-crustal channel on top of strong lower crust and a horizontal thermal weakness in the rift
center. During model extension, the upper crust undergoes distributed collapse into the rift center where the thermally weakened
portion of the model tears. Among the features reproduced by the modeling, we observe: (1) an array of tilted upper-crustal
blocks resting directly on exhumed mantle at the distal margin, (2) consistently oceanward-dipping normal faults, (3) a mid-crustal
high strain zone at the base of the crustal blocks (S-reflector), (4) new ocean floor up against a low angle normal fault
at the tip of the continent, (5) shear zones consistent with continentward-dipping reflectors in the mantle lithosphere, (6)
the mismatch frequently observed between stretching values inferred from surface extension and bulk crustal thinning at distal
margins (upper plate paradox). Rifting in the experiment is symmetric at a lithospheric scale and the above features develop
on both sides of the rift center. We discuss three controversial points in more detail: (1) weak versus strong lower crust,
(2) the deformation pattern in the mantle, and (3) the significance of detachment faults during continental breakup. We argue
that the transition from wide rifting towards narrow rifting with a pronounced polarity towards the rift center is associated
with the advective growth of a thermal perturbation in the mantle lithosphere. 相似文献
3.
Alain Vauchez Marcos Egydio‐Silva Marly Babinski Andra Tommasi Alexandre Uhlein Dunyi Liu 《地学学报》2007,19(4):278-286
Pervasive melting of the middle crust, as inferred in Tibet and the Altiplano, probably influences the deformation of the lithosphere. To constrain strain distribution in a pervasively molten crust, we analysed the deformation in an eroded analogue of these orogens. The Ribeira‐Araçuaí orogen (SE Brazil) comprises a stack of allochthons containing large volumes of anatectic and magmatic rocks. The upper allochton (∼300 km long, 50–100 km wide and >10 km thick) involves peraluminous diatexites and leucogranites resulting from partial melting of the middle crust. It overlies another allochthon containing huge early‐ to syn‐collisional plutons intruding metasediments. Both anatexites and magmatic intrusions display a pervasive strain‐induced magmatic fabric. Homogeneous strain distribution suggests inefficient localization. U–Pb ages of ∼575 Ma imply that anatexite melting was synchronous to the early‐ to syn‐collisional magmatism. Similarity in ages magmatic and solid‐state fabrics indicates that intrusions and anatexites deformed coherently with solid‐state rocks while still molten, in response to a combination of gravity‐driven and collision‐driven deformation. 相似文献
4.
The Novate intrusion is a Late Alpine leucogranite that intruded the structures related to dextral back‐thrusting along the Periadriatic Fault System in the Eastern Central Alps. The Novate granite was heterogeneously deformed from amphibolite to greenschist facies conditions during cooling of the intrusion. The deformation inside the granite is characterized by strongly localized and anastomosed ductile shear zones surrounding lenses of weakly deformed granite and by late faults formed at the brittle–ductile transition. The fault kinematic analysis of conjugated shear zones suggests that the Novate leucogranite was emplaced at 25 Ma in an extensional regime along the southern tip of the Forcola Fault. A model of extensional jog opening by vertical shearing along the Forcola Fault provided the space for magma accommodation. The Novate granite is the first evidence for orogen‐parallel syn‐extensional leucogranite emplacement during the Oligocene collision in the Alps. 相似文献
5.
NIE Rui SONG Hao LI Qi GUO Yuping YAN Wenquan SI Fei YAO Chang LI Wei ZHAO Zichao 《《地质学报》英文版》2019,93(Z2):115-116
In this paper we compare four types of stratigraphic architectures around the continental margins in the South China Sea (SCS) based on a plentiful of seismic profiles. The results indicate that stratigraphic patterns are not only related closely to structure regimes of peripheral of the SCS, but also are restrained by crust structure from continental crust to oceanic crust. In the extensional setting, depositional centres during the syn‐spreading stage are located in the strong extensional area. A wedge‐decrease continental crust represented by the Pearl River Mouth type is characterized by high deposition and subsidence rate during the syn‐rifting and syn‐spreading stages in the distal zone. And in the Zhongjiannan type with a continental ribbon, high deposition and subsidence rate during the syn‐rifting and syn‐spreading stages are present in the proximal zone. However, in the southern and eastern margins with compressional setting, the Liyue and Zengmu microcontinent blocks are separated from the South China with the seafloor spreading of SCS, in which a confined or relative thin syn‐spreading deposits are presence. High deposition and subsidence rate is closely related to the collision or subduction condition during the post‐spreading stage in the Liyue bank type and the Zengmu type, a huge progradational clinoforms are present along the subduction and collision margin. Therefore, this study shows distinct stratigraphic architecture in different continental rifted margins, distinct depositional and subsidence characteristics formed during the process of lithospheric rupture can provide an effective method for the study on the continental marginal sea in the western Pacific. 相似文献
6.
The Austroalpine nappe systems in SE-Switzerland and N-Italy preserve remnants of the Adriatic rifted margin. Based on new
maps and cross-sections, we suggest that the complex structure of the Campo, Grosina/Languard, and Bernina nappes is inherited
largely from Jurassic rifting. We propose a classification of the Austroalpine domain into Upper, Middle and Lower Austroalpine
nappes that is new because it is based primarily on the rift-related Jurassic structure and paleogeography of these nappes.
Based on the Alpine structures and pre-Alpine, rift-related geometry of the Lower (Bernina) and Middle (Campo, Grosina/Languard)
Austroalpine nappes, we restore these nappes to their original positions along the former margin, as a means of understanding
the formation and emplacement of the nappes during initial reactivation of the Alpine Tethyan margin. The Campo and Grosina/Languard
nappes can be interpreted as remnants of a former necking zone that comprised pre-rift upper and middle crust. These nappes
were juxtaposed with the Mesozoic cover of the Bernina nappe during Jurassic rifting. We find evidence for low-angle detachment
faults and extensional allochthons in the Bernina nappe similar to those previously described in the Err nappe and explain
their role during subsequent reactivation. Our observations reveal a strong control of rift-related structures during the
subsequent Alpine reactivation on all scales of the former distal margin. Two zones of intense deformation, referred to as
the Albula-Zebru and Lunghin-Mortirolo movement zones, have been reactivated during Alpine deformation and cannot be described
as simple monophase faults or shear zones. We propose a tectonic model for the Austroalpine nappe systems that link inherited,
rift-related structures with present-day Alpine structures. In conclusion, we believe that apart from the direct regional
implications, the results of this paper are of general interest in understanding the control of rift structures during reactivation
of distal-rifted margins. 相似文献
7.
Current rift models propose polyphase rift evolutions that develop with the same kinematic framework and accommodate continuous and sequential extension, through the stacking of deformation modes. Several rifted margins show, however, evidence for multiple and out of sequence rift events, which developed within different kinematic frameworks, with a complex spatial and temporal evolution. In this work, we address the problem of multi-stage rifting based on the study of the central North Iberian margin, located at the southern Bay of Biscay triangular oceanic domain. This magma-poor rifted margin recorded three major Mesozoic rift events and a subsequent Alpine compressional reactivation, representing a unique setting to study the architecture of multi-stage rift systems and the exerted control on subsequent reactivation. Relying on a dense set of 2D seismic reflection profiles, boreholes, and published velocity models, we map and describe structural domains and major extensional and compressional structures, and we construct depth and thickness maps of syn-rift units. These new maps display the geometry and spatial distribution of major rift basins and bounding structures. Distinctive scenarios resulting from this tectono-stratigraphic approach led us to define three rift systems. A first, diffuse and widespread Triassic system, with classical fault-bounded half-graben basins; a second, narrow, deep and localised Late Jurassic to Barremian transtensional system, including laterally confined pull-apart basins; and a third, widely distributed, Aptian to Cenomanian hyperextended system. Our results show that each rift system controlled the successive extensional events and the subsequent contractional deformation, resulting in a complex 3D template. Deciphering the tectono-stratigraphic architecture of such, multi-stage systems provide key insights on the spatial, temporal, and thermal evolution of divergent plate boundaries. It is likewise indispensable to propose and test kinematic plate deformable models on conjugate rifted margins and to comprehend the implications for their reactivation. 相似文献
8.
The Tyrrhenian Sea is a Neogene back-arc basin formed by continental extension at the rear of the eastward migrating Apennine subduction system. Its central part, generated from Tortonian to Pliocene, includes the Sardinia rifted margin to the west, an area with large volcanoes in the deep central sector, and the Campania rifted margin to the east. A reprocessing of some 2000 km of MCS lines, a new swath bathymetric map, and a review of previous geological and geophysical data allow to analyse the nature and distribution of continental vs. oceanic crust in this area, which evolved in a short time span.The central portion of the southern Tyrrhenian Sea is characterized by MOHO at about 10 km depth. North of Magnghi and Vavilov Smts, this thinned crustal domain include a wide continent–ocean transition, with the occurrence of extensional allochthons and of serpenitinzed sub-continental mantle, recalling other well known rifted margins, as the Iberia one. Sectors floored by oceanic crust should occur, mainly in the southern part of the study area, but they do not appear related to discrete spreading ridges. The continent–ocean boundary cannot be drawn unequivocally in the area, due also to the occurrence of widespread and huge magmatic manifestations not related to oceanic spreading. These portions of the southern Tyrrhenian Sea represents therefore a complex oceanic back-arc basin surrounded by magma-rich rifted continental margins.The abundant igneous manifestations and the very high stretching rates observed in the area may be related to the fact that the present Tyrrhenian area was occupied by an orogenic domain affected by shortening until middle Miocene times, which is just before the Late Miocene onset of back-arc extension. The lithosphere in the region had then to be rheologically weak. Abundant generation and ascent of magmas, mostly of Ocean Island Basalt type, was favoured by the large lithospheric permeability induced by strong extensional deformations. 相似文献
9.
详细的深部结构信息是深入认识华北克拉通显生宙改造和破坏的重要依据。基于密集流动地震台阵和固定台网记录的远震P波和S波接收函数资料,获得了跨越华北克拉通东、中、西部的3条剖面的岩石圈和上地幔结构图像,揭示了克拉通不同区域深部结构特征的显著差异。与东部普遍减薄的岩石圈(60～100km)相比,中、西部表现出厚、薄岩石圈共存的强烈横向非均匀性,既在稳定的鄂尔多斯盆地之下保留着厚达200km的岩石圈,又在新生代银川—河套和陕西—山西裂陷区存在厚度<100km的薄岩石圈,差异最大的厚、薄岩石圈仅相距约200km。岩石圈厚度在东、中部边界附近的约100km横向范围内显示出20～40km的迅速增加。岩石圈厚度的快速变化与地表地形从东向西的突然改变以及南北重力梯度带的位置大致吻合,并对应于地壳结构、地幔转换带厚度和660km间断面结构的快速变化。这种从地表到上地幔底部深、浅结构的耦合变化特征表明,东西两侧区域在显生宙可能经历了不同的岩石圈构造演化和深部地幔动力学过程。克拉通东部薄的地壳、岩石圈和厚的地幔转换带以及复杂的660km间断面结构可能与中生代以来太平洋板块深俯冲及其相关过程对这一地区岩石圈的改造和破坏有关;而中、西部存在显著减薄的岩石圈这一观测结果,并结合岩石、地球化学资料表明,克拉通岩石圈改造和减薄不仅发生在东部,而且可能影响了包括中、西部在内的更广泛的区域。岩石圈薄于100km的中、西部裂陷区可能与先前存在于岩石圈中的局部构造薄弱带相联系。这些古老岩石圈薄弱带可能经历了后期构造事件的多次改造,并在新生代印度—欧亚陆陆碰撞过程中被进一步弱化、减薄,最终造成地表裂陷。另一方面,中、西部总体较厚的地壳、岩石圈以及正常偏薄的地幔转换带表明,同太平洋深俯冲对东部的作用相比,包括印度—欧亚大陆碰撞在内的多期热-构造事件对该地区的构造演化影响相对较弱,不足以大范围改造和破坏高强度的克拉通岩石圈地幔根,从而造成了该地区现今岩石圈结构的高度横向不均匀。 相似文献
10.
The significance and role of major shear zones are paramount to understanding continental deformation and the exhumation of deep crustal levels. LA‐ICPMS U–Pb dating of monazites, combined with Rb–Sr analyses of biotites, from an anatectic metapelite from Greater Kabylia (Algeria) highlights the history of shear zone development and the subsequent exhumation of deep crustal levels in the internal zones of the Maghrebides. Monazites give an age of 275.4 ± 4.1 Ma (2σ) dating the thermal peak coeval with anatexis. This age is identical to those recorded in other crystalline terranes from south‐easternmost Europe (i.e. South Alpine and Austro‐Alpine domains) that suffered crustal thinning during the continental rifting predating the Tethys opening. Rb–Sr analyses of biotites yield a cooling age of 23.7 ± 1.1 Ma related to the exhumation of the buried Variscan crust during the Miocene as an extrusive slice, roughly coeval with the emplacement of nappes, and shortly followed by lithospheric extension leading to the opening of the Alboran sea. 相似文献
11.
Rocks of the west flank of the northern Appalachian Orogen (miogeocline) record the history of the late Precambrian-early Paleozoic passive continental margin of Eastern North America. The ancient margin was destroyed by ophiolite obduction and arc collision during the Ordovician Taconic Orogeny. The present sinuous form of the miogeocline is interpreted to reflect ancient promontories and re-entrants of a previous orthogonal margin bounded by rifts and transforms.Four major terranes are recognized east of the miogeocline in Newfoundland and Nova Scotia. From west to east, these are the Dunnage, Gander, Avalon and Meguma. The Dunnage and Gander terranes were linked to the miogeocline during the Middle Ordovician Taconian Orogeny. The Avalon terrane arrived later, possibly during the mid-Paleozoic Acadian Orogeny. The Meguma terrane of southern Nova Scotia had docked with the Avalon terrane by Carboniferous time. The Dunnage terrane contains arc volcanics which lie above an ophiolitic substrate. The Gander terrane comprises a thick sequence of clastic sedimentary rocks, underlain by basement rocks with continental affinities. It has been interpreted as a continental margin, perhaps once on the eastern side of the Paleozoic Iapetus ocean. The Avalon terrane consists of belts of sedimentary and volcanic rocks which are probably underlain by Grenvillian basement. Its tectonic affinities are unclear. The Meguma terrane comprises a thick sequence of sediments, derived from the south-east. It is found only in southeastern Atlantic Canada. The boundaries between terranes are compressional in the west and steep, transcurrent faults in the east.The surface extent of the geological terranes is grossly correlative with deep structural zones, although no direct evidence exists for linking the two because most surface structures can be traced geophysically to only a few kilometres depth. A striking feature of the deep crustal structure is a lower, high velocity crustal layer beneath the Dunnage and Gander terranes.The modern margin of Atlantic Canada developed by rifting and by transform motion between adjacent continents. Stretching and thinning of the lithosphere, and the consequent production of basaltic magma that in places intrudes or underplates the thinned continental crust, are the most likely processes responsible for the evolution of the modern margin. These processes predict the observed deep sedimentary basins along the margin, the thinning of continental crust, and the high seismic velocities found within the ocean-continent transition zones.Rifting adjacent to Nova Scotia began in Late Triassic-Early Jurassic time between the present African and North American plates. These plate motions are also responsible for the major transform margin south of the Grand Banks. Separation between Iberia and the eastern Grand Banks occurred in mid-Cretaceous time, before the Late Cretaceous opening of the Labrador Sea. While the rifted segments of the margin exhibit deep sedimentary basins and thinned continental crust, the Grand Banks transform segment is characterized by a sharp transition zone and a relatively thin sediment cover. Numerous volcanic seamounts are built on the ocean crust adjacent to this transform segment.Mimicry of Paleozoic promontories and re-entrants by modern rift and transform margin segments, the location of Mesozoic sedimentary basins on ancestral Appalachian structures, and the reactivation and propagation of major Precambrian and Paleozoic structural boundaries during the latest phase of ocean opening attest to ancestral controls of the modern margins.The rift phase of both the ancient and modern passive margins is characterized by volcanism, mafic dike intrusion and by the development of basins filled with clastic sediments. The drift phase of both the ancient margin and the present Nova Scotia margin is marked by a change in sedimentary environment, such that carbonates replaced the rift phase clastic sediments. Two of the markers used to delineate the ancient ocean-continent transition zone; carbonate banks and steep gravity anomaly gradients, should be used with caution as the modern analogs of these markers may lie 100 km or more of this transition zone. Furthermore, it is naive to view the ancient transition as simple and narrow, for the modern margins exhibits complex transition zones between 30 and 300 km wide.In general, the evolution of the ancient and modern passive margins appear to be remarkably similar. Predictably, closing the present Atlantic will mimic the evolution of the Appalachian Orogen. 相似文献
12.
Analysis of earthquake focal mechanisms allows division of the India‐Asia collision into kinematic domains that strongly correlate with topography. These kinematic domains indicate strain partitioning dominated by oblique slip deformation. The Kunlun and south Tibetan fault systems mark discontinuities in the strain field and bound the high, flat topography of the plateau which deforms by transtension. The northern and southern margins of Tibet deform by transpression or contraction and are topographically steep. Correlations between seismicity and topography are due to Mohr–Coulomb wedge mechanics at the northern and southern plateau margins which produce naturally steep surface slopes, whereas the flat interior and eastern margin of the Tibetan Plateau is underlain by viscous crust which supports subdued topography further muted by Cenozoic basin fill. These data indicate that the long wavelength topography of the India‐Asia collision is controlled by seismically caused surface displacements which are linked to deep crustal deformation mechanics. 相似文献
13.
We present results from a 484 km wide-angle seismic profile acquired in the northwest part of the South China Sea (SCS) during OBS2006 cruise. The line that runs along a previously acquired multi-channel seismic line (SO49-18) crosses the continental slope of the northern margin, the Northwest Subbasin (NWSB) of the South China Sea, the Zhongsha Massif and partly the oceanic basin of the South China Sea. Seismic sections recorded on 13 ocean-bottom seismometers were used to identify refracted phases from the crustal layer and also reflected phases from the crust-mantle boundary (Moho). Inversion of the traveltimes using a simple start model reveals crustal images in the study area. The velocity model shows that crustal thickness below the continental slope is between 14 and 23 km. The continental part of the line is characterized by gentle landward mantle uplift and an abrupt oceanward one. The velocities in the lower crust do not exceed 6.9 km/s. With the new data we can exclude a high-velocity lower crustal body (velocities above 7.0 km/s) at the location of the line. We conclude that this part of the South China Sea margin developed by a magma-poor rifting. Both, the NWSB and the Southwest Sub-basin (SWSB) reveal velocities typical for oceanic crust with crustal thickness between 5 and 7 km. The Zhongsha Massif in between is extremely stretched with only 6–10 km continental crust left. Crustal velocity is below 6.5 km/s; possibly indicating the absence of the lower crust. Multi-channel seismic profile shows that the Yitongansha Uplift in the slope area and the Zhongsha Massif are only mildly deformed. We considered them as rigid continent blocks which acted as rift shoulders of the main rift subsequently resulting in the formation of the Northwest Sub-basin. The extension was mainly accommodated by a ductile lower crustal flows, which might have been extremely attenuated and flow into the oceanic basin during the spreading stage. We compared the crustal structures along the northern margin and found an east-west thicken trend of the crust below the continent slope. This might be contributed by the east-west sea-floor spreading along the continental margin. 相似文献
14.
The Tethyside orogen, a direct consequence of the separation of the Gondwanaland and the accretion of Eurasia, is a huge composite orogenic system that was generated during Paleozoic–Mesozoic Tethyan accretionary and Cenozoic continent–continent collisional orogenesis within the Tethyan domain. The Tethyside orogenic system consists of a group of diverse Tethyan blocks, including the Istanbul, Sakarya, Anatolide–Taurides, Central Iran, Afghanistan, Songpan–Ganzi, Eastern Qiangtang, Western Qiangtang, Lhasa, Indochina, Sibumasu, and Western Burma blocks, which were separated from Gondwana, drifted northwards, and accreted to the Eurasian continent by opening and closing of two successive Tethyan oceanic basins (Paleo-Tethyan and Neo-Tethyan), and subsequent continental collision.The Tethyan domain represents a metallogenic amalgamation across diverse geodynamic settings, and is the best endowed of all large orogenic systems, such as those associated with the Cordilleran and Variscan orogenies. The ore deposits within the Tethyan domain include porphyry Cu–Mo–Au, granite-related Sn–W, podiform chromite, sediment-hosted Pb–Zn deposits, volcanogenic massive sulfide (VMS) Cu–Pb–Zn deposits, epithermal and orogenic Au polymetallic deposits, as well as skarn Fe polymetallic deposits. At least two metallogenic supergroups have been identified within the eastern Tethyan metallogenic domain (ETMD): (1) metallogenesis related to the accretionary orogen, including the Zhongdian, Bangonghu, and Pontides porphyry Cu belts, the Pontides, Sanandaj–Sirjan, and Sanjiang VMS belts, the Lasbela–Khuzdar sedimentary exhalative-type (SEDEX) Pb–Zn deposits, and podiform chromite deposits along the Tethyan ophiolite zone; and (2) metallogenesis related to continental collision, including the Gangdese, Yulong, Arasbaran–Kerman and Chagai porphyry Cu belts, the Taurus, Sanandaj–Sirjan, and Sanjiang Mississippi Valley-type (MVT) Pb–Zn belts, the Southeast Asia and Tengchong–Lianghe Sn–W belts or districts, the Himalayan epithermal Sb–Au–Pb–Zn belt, the Piranshahr–Saqez–Sardasht and Ailaoshan orogenic Au belts, and the northwest Iran and northeastern Gangdese skarn Fe polymetallic belts. Mineral deposits that are generated with tectonic evolution of the Tethys form in specific settings, such as accretionary wedges, magmatic arcs, backarcs, and passive continental margins within accretionary orogens, and the foreland basins, foreland thrust zones, collisional sutures, collisional magmatic zones, and collisional deformation zones within collisional orogens.Synthesizing the architecture and tectonic evolution of collisional orogens within the ETMD and comparisons with other collisional orogenic systems have led to the identification of four basic types of collision: orthogonal and asymmetric (e.g., the Tibetan collision), orthogonal and symmetric (Pyrenees), oblique and symmetric (Alpine), and oblique and asymmetric (Zagros). The tectonic evolution of collisional orogens typically includes three major processes: (1) syn-collisional continental convergence, (2) late-collisional tectonic transform, and (3) post-collisional crustal extension, each forming distinct types of ore deposits in specific settings. The resulting synthesis leads us to propose a new conceptual framework for the collision-related metallogenic systems, which may aid in deciphering relationships among ore types in other comparable collisional orogens. Three significant processes, such as breaking-off of subducted Tethyan slab, large-scale strike-slip faulting, shearing and thrusting, and delamination (or broken-off) of lithosphere, developed in syn-, late- and post-collisional periods, repsectively, were proposed to act as major driving forces, resulting in the formation of the collision-related metallogenic systems. Widespread appearance of juvenile crust and intense inteaction between mantle and crust within the Himalayan–Zagros orogens indicate that collisional orogens have great potential for the discovery of large or giant mineral deposits. 相似文献
15.
D. M. Finlayson I. Lukaszyk C. D. N. Collins E. C. Chudyk 《Australian Journal of Earth Sciences》2013,60(5):717-732
The Otway Basin in southeastern Australia formed on a triangular‐shaped area of extended continental lithosphere during two extensional episodes in Cretaceous to Miocene times. The extent of the offshore continental margin is highlighted by Seasat/Geosat satellite altimeter data. The crustal architecture and structural features across this southeast Australian margin have been interpreted from offshore‐onshore wide‐angle seismic profiling data along the Otway Continental Margin Transect extending from the onshore Lake Condah High, through the town of Portland, to the deep Southern Ocean. Along the Otway Continental Margin Transect, the onshore half‐graben geometry of Early Cretaceous deposition gives way offshore to a 5 km‐thick slope basin (P‐wave velocity 2.2–4.6 km/s) to at least 60 km from the shoreline. At 120 km from the nearest shore in a water depth of 4220 m, sonobuoy data indicate a 4–5 km sedimentary sequence overlying a 7 km thick basement above the Moho at 15 km depth. Major fault zones affect the thickness of basin sequences in the onshore area (Tartwaup Fault Zone and its southeast continuation) and at the seaward edge of the Mussel Platform (Mussel Fault). Upper crustal basement is interpreted to be attenuated and thinned Palaeozoic rocks of the Delamerian and Lachlan Orogens (intruded with Jurassic volcanics) that thin from 16 km onshore to about 3.5 km at 120 km from the nearest shore. Basement rocks comprise a 3 km section with velocity 5.5–5.7 km/s overlying a deeper basement unit with velocity 6.15–6.35 km/s. The Moho shallows from a depth of 30 km onshore to 15 km depth at 120 km from the nearest shore, and then to about 12 km in the deep ocean at the limits of the transect (water depth 5200 m). The continent‐ocean boundary is interpreted to be at a prominent topographic inflection point 170 km from shore at the bottom of the continental slope in 4800 m of water. P‐wave velocities in the lower crust are 6.4–6.8 km/s, overlying a thin transition zone to an upper mantle velocity of 8.05 km/s beneath the Moho. Outstandingly clear Moho reflections seen in deep‐marine profiling data at about 10.3 s two‐way time under the slope basin and continent‐ocean boundary place further strong controls on crustal thickness. There is no evidence of massive high velocity (>7 km/s) intrusives/underplate material in the lower crust nor any synrift or early post‐rift subaerial volcanics, indicating that the Otway continental margin can be considered a non‐volcanic margin, similar in many respects to some parts of the Atlantic Ocean margins e.g. the Nova Scotia ‐ Newfoundland margin off Canada and the Galicia Bank off the Iberian Peninsula. Using this analogue, the prominent gravity feature trending northwest‐southeast at the continent‐ocean boundary may indicate the presence of highly serpentinised mantle material beneath a thin crust, but this has yet to be tested by detailed work. 相似文献
16.
《International Geology Review》2012,54(9):1051-1071
Asia is the world’s largest but youngest continent, in which Pacific-type (P-type) and collision-type (C-type) orogenic belts coexist with numerous amalgamated continental blocks. P-type orogens represent major sites of continental growth through tonalite-trondhjemite-granodiorite type (TTG-type) juvenile granitoid magmatism and accretion of oceanic crust and intra-oceanic arcs. The Asian continent includes several P-type orogenic belts, of which the largest are the Central Asian and Western Pacific. The Central Asian Orogenic Belt is dominated by P-type fossil orogens arranged with a regular northward subduction polarity. The Western Pacific is characterized by ongoing P-type orogeny related to the westward subduction of the Pacific plate. Asia has a multi-cratonic structure and its post-Palaeozoic history has witnessed amalgamation of the Laurasia composite continent and Pangaea supercontinent. Nowadays, Asia is surrounded by double-sided subduction zones, which generate new TTG-type crust and supply oceanic crust and microcontinents to its active margins. The TTG-crust can be tectonically eroded and subducted down to the mantle transition zone to form a ‘second’ continent, which may generate mantle upwelling, plumes, and extensive intra-plate volcanism. Moreover, recent plate movements around Asia are dominated by northward directions, which resulted in the India–Eurasia and Arabia–Eurasia collisions beginning at 50–45 and 23–20 Ma, respectively, and will result in Africa–Eurasia collision in the near future. Therefore, Asia is the best candidate to serve as the nucleus for a future supercontinent ‘Amasia’, likely to form 200–250 Ma in the future. In this paper we unravel a puzzle of continental growth in Asia through P-type orogeny by discussing its tectonic history and geological structure, subduction polarity in P-type orogens, tectonic erosion of TTG-type crust and arc subduction at convergent margins, generation of mantle plumes, and prospects of Asia growth and overgrowth. 相似文献
17.
Tasman Geosyncline greenstones and ophiolites 总被引：1，自引：1，他引：0
Palaeozoic greenstones lying at the base of stratigraphic sequences or in fault blocks in the Tasman Geosyncline are compared with the Penrose Conference definnition of an ophiolite by using tabulated petrological, structural, and metallogenic data. Of 45 occurrences, only 9 are recognizably ophiolites: 4 are in rift zones adjoining Precambrian continental crust at the ends of the geosyncline; and away from the margins, in that part of the geosyncline most typically of West Pacific‐type, only 5 of the 33 greenstone occurrences are recognizably ophiolites. Ophiolites are rare in the Tasman Geosyncline, in contrast to several Atlantic‐type geosynclines. This may be a characteristic of West Pacific‐type geosynclines in general. Alpine‐type serpentinites are rather common in the Tasman Geosyncline. The metallogeny of some shows affinities with ophiolites, suggesting a common origin as oceanic crust. Their relative abundance suggests that West Pacific‐type geosynclines, such as the Tasman Geosyncline, may have developed on oceanic crust of unusual composition. Alternatively, it may reflect differences of deformation style between Atlantic‐ and West Pacific‐type geosynclines. The term ophiolite has been used uncritically in plate tectonic analyses of the Tasman Geosyncline, calling in question the objectivity of these analyses. If objectivity is to be maintained, some indication should be given of the quality of the data used in plate tectonic analyses. 相似文献
18.
Magmatism at continental passive margins inferred from Ambient‐Noise Phase‐velocity in the Gulf of Aden 
下载免费PDF全文
下载免费PDF全文 Félicie Korostelev Sylvie Leroy Derek Keir Cornelis Weemstra Lapo Boschi Irene Molinari Abdulhakim Ahmed Graham W. Stuart Frédérique Rolandone Khaled Khanbari Ali Al‐Lazki 《地学学报》2016,28(1):19-26
Non‐volcanic continental passive margins have traditionally been considered to be tectonically and magmatically inactive once continental breakup has occurred and seafloor spreading has commenced. We use ambient‐noise tomography to constrain Rayleigh‐wave phase‐velocity maps beneath the eastern Gulf of Aden (eastern Yemen and southern Oman). In the crust, we image low velocities beneath the Jiza‐Qamar (Yemen) and Ashawq‐Salalah (Oman) basins, likely caused by the presence of partial melt associated with magmatic plumbing systems beneath the rifted margin. Our results provide strong evidence that magma intrusion persists after breakup, modifying the composition and thermal structure of the continental margin. The coincidence between zones of crustal intrusion and steep gradients in lithospheric thinning, as well as with transform faults, suggests that magmatism post‐breakup may be driven by small‐scale convection and enhanced by edge‐driven flow at the juxtaposition of lithosphere of varying thickness and thermal age. 相似文献
19.
Evgeny Kh. TURUTANOV Evgeny V. SKLYAROV Valentina V. MORDVINOVA Anatoly M. MAZUKABZOV Viktor S. KANAYKIN 《地学前缘》2021,28(5):260-282
地学断面是指地壳的垂直剖面,主要通过对地质和地球物理资料的综合分析来揭示构造带的性质及其空间关系。横断面的研究所采用的数据基本包括100 km宽区域地质图、上地壳的地质剖面图、重磁图(沿横断面的重磁剖面图)以及地壳的地震波速度、密度和其他地球物理属性的剖面图。这些数据被用于构建综合的数据剖面图(结果图),以展示各种地球动力学条件下(裂谷、海洋、碰撞带、造山盆地、大陆地台和岩浆弧,包括安第斯岛弧、活动大陆边缘、海沟、弧前和弧后盆地)的特定的岩石组构。本项目的研究目标是根据研究区现存的地质和地球物理数据的综合解释,统一图例,建立研究区深部剖面,以确定地体的空间关系及其在板块构造方面的地球动力学性质。 前人已分别对东西伯利亚南部和蒙古境内的多个地体进行了构造划分,并对它们的地球动力学性质和时空关系进行了分析。研究结果显示该系列地体为早古生代、中晚古生代和晚古生代—早中生代的岛弧和微大陆。此外,研究还识别出了中—晚古生代和晚古生代—早中生代安第斯型活动大陆边缘、晚古生代—早中生代被动大陆边缘和早白垩世裂谷。与岛弧和安第斯型活动大陆边缘相关的岩体被推覆至相邻大陆和微陆块上,部分推覆宽度可达150 km。目前已开展泥盆纪到晚侏罗世时期蒙古-鄂霍次克海地区的古地球动力学重建。 “非地槽”型花岗岩类岩浆作用在板块构造方面找到了直接且合理的解释,其中泥盆纪—石炭纪和二叠纪—三叠纪岩浆作用区域对应于安第斯型活动大陆边缘,中—晚侏罗世岩浆作用则与西伯利亚/蒙古-中国大陆板块碰撞有关。碰撞岩浆作用中亚碱性(地幔)元素的存在及其所在的构造区域在很大程度可以说明蒙古-鄂霍次克海闭合后,巨厚大陆岩石圈下曾经发生过持续的大洋裂谷活动(地幔热点)。在早白垩世时期,大陆裂谷活动影响到了同一时期正在发生的大陆汇聚作用。 西伯利亚南部边界大部分具有安第斯型活动大陆边缘性质,这也是蒙古—鄂霍次克缝合线沿线蛇绿岩数量较少的原因。因为当汇聚大陆一个具有安第斯类型的活动边缘,而另一个具有被动边缘时,前者的大陆地壳会最终逆冲到后者之上,并因此破坏掉先前出露的蛇绿杂岩体。部分被破坏的蛇绿岩块是俯冲带保留下来的海山残余,其可能成为增生-俯冲楔体的混沌复合体的一部分。然而,由于快速俯冲作用,这种楔形体在晚二叠世—早侏罗世的积累并不是西伯利亚活动边缘的典型特征。 沿地学断面综合的地质和地球物理资料分析表明,亚洲大陆是在显生宙时期由部分前寒武纪微陆块构造拼贴而成的。前寒武纪地块间存在不同宽度的已变形且剥蚀强烈的显生宙火山弧,它们也被归类为特定地体。 相似文献
20.
New models for evolution of magma-poor rifted margins based on a review of data and concepts from West Iberia and the Alps 总被引：3，自引：2，他引：1
Direct observation and extensive sampling in ancient margins exposed in the Alps, combined with drill-hole and geophysical data from the present-day Iberia margin, result in new concepts for the strain evolution and near-surface response to lithospheric rupturing at magma-poor rifted margins. This paper reviews data and tectonic concepts derived from these two margins and proposes that extension, leading to thinning and final rupturing of the continental lithosphere, is accommodated by three fault systems, each of them characterized by a specific temporal and spatial evolution during rifting of the margin, by its fault geometry, and its surface response. The data presented in this paper suggest that margin architecture and distribution of rift structures within the future margin are controlled first by inherited heterogeneities within the lithosphere leading to a contrasting behaviour of the future distal and proximal margins during an initial stage of rifting. The place of final break-up appears to be determined early in the evolution of the margin and occurs where the crust has been thinned during a first stage to less than 10 kilometres. During final break-up, the rheology of the extending lithosphere is controlled by the thermal structure related to the rise of the asthenosphere and by serpentinization and magmatic processes.Dedicated to Daniel Bernoulli who taught me to compare the geological record of oceans and orogens 相似文献