首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Hidden beneath the ~ 2 km thick low-velocity volcaniclastics on the western margin of the Central Volcanic Region, North Island, New Zealand, are two structures that represent the early history of volcanic activity in a continental back-arc. These ~ 20 × 20 km structures, at Tokoroa and Mangakino, form an adjacent gravity high and low, respectively. Interpretations from seismic refraction arrivals and gravity modelling indicate the − 65 mgal Mangakino residual gravity anomaly can be modelled, in part, by two low-density bodies that reach depths of ~ 6.5 km, whereas the Tokoroa gravity anomaly is due to a higher density rock coming, at most, to within ~ 650 m of the surface. The Mangakino anomaly is interpreted to be due to the remnants of magma chambers that fed large ignimbrite eruptions from about 1.2 Ma. An andesite volcano or complex volcanic structure is the preferred interpretation for the Tokoroa gravity high. The size of the putative volcanic structure is comparable to the presently active Tongariro Volcanic Complex in the centre of North Island.  相似文献   

2.
Rift zones at the divergent plate boundary in Iceland consist of central volcanoes with swarms of fractures and fissures extending away from them. Fissure swarms can display different characteristics, in accordance with their locations within the ∼50-km-wide rift zones. To better discern the characteristics of fissure swarms, we mapped tectonic fractures and volcanic fissures within the Kverkfj?ll volcanic system, which is located in the easternmost part of the Northern Volcanic Rift Zone (NVZ). To do this, we used aerial photographs and satellite images. We find that rifting structures such as tectonic fractures, Holocene volcanic fissures, and hyaloclastite ridges are unevenly distributed in the easternmost part of the NVZ. The Kverkfj?ll fissure swarm extends 60 km north of the Kverkfj?ll central volcano. Holocene volcanic fissures are only found within 20 km from the volcano. The Fjallgarear area, extending north of the Kverkfj?ll fissure swarm, is characterized by narrow hyaloclastite ridges indicating subglacial volcanism. We suggest that the lack of fractures and Holocene volcanic fissures there indicates decreasing activity towards the north in the easternmost part of the NVZ, due to increasing distance from the long-term spreading axis. We argue that arcuate hyaloclastite ridges at the eastern boundary of the Northern Volcanic Rift Zone are mainly formed during deglaciations, when three conditions may occur; firstly, eruption rate increases due to decompression of the mantle. Secondly, the high tensile stresses accumulated during glaciations due to lack of magma supply may be relieved as magma supply increases during deglaciations. Thirdly, faulting may occur during unloading due to differential movements between the thinner and younger Northern Volcanic Rift Zone crust and the thicker and older crust to the east of it.  相似文献   

3.
 The ca. 10,500 years B.P. eruptions at Ruapehu volcano deposited 0.2–0.3 km3 of tephra on the flanks of Ruapehu and the surrounding ring plain and generated the only known pyroclastic flows from this volcano in the late Quaternary. Evidence of the eruptions is recorded in the stratigraphy of the volcanic ring plain and cone, where pyroclastic flow deposits and several lithologically similar tephra deposits are identified. These deposits are grouped into the newly defined Taurewa Formation and two members, Okupata Member (tephra-fall deposits) and Pourahu Member (pyroclastic flow deposits). These eruptions identify a brief (<ca. 2000-year) but explosive period of volcanism at Ruapehu, which we define as the Taurewa Eruptive Episode. This Episode represents the largest event within Ruapehu's ca. 22,500-year eruptive history and also marks its culmination in activity ca. 10,000 years B.P. Following this episode, Ruapehu volcano entered a ca. 8000-year period of relative quiescence. We propose that the episode began with the eruption of small-volume pyroclastic flows triggered by a magma-mingling event. Flows from this event travelled down valleys east and west of Ruapehu onto the upper volcanic ring plain, where their distal remnants are preserved. The genesis of these deposits is inferred from the remanent magnetisation of pumice and lithic clasts. We envisage contemporaneous eruption and emplacement of distal pumice-rich tephras and proximal welded tuff deposits. The potential for generation of pyroclastic flows during plinian eruptions at Ruapehu has not been previously considered in hazard assessments at this volcano. Recognition of these events in the volcanological record is thus an important new factor in future risk assessments and mitigation of volcanic risk at Tongariro Volcanic Centre. Received: 5 July 1998 / Accepted: 12 March 1999  相似文献   

4.
The Taupo Volcanic Zone forms part of the Taupo-Hikurangi subduction system, and comprises five volcanic centres: Tongariro, Taupo, Maroa, Okataina and Rotorua. Tongariro Volcanic Centre is formed almost entirely of andesite while the other four centres contain predominantly rhyolitic volcanics and later fissure eruptions of high-Al basalt. Estimated total volume of each lava type are as follows: 2 km3 of high-Al basalt (< 0.1%); 260 km3 of andesite (< 2.5%); 5 km3 of dacite (< 0.1%); > 10,000 km3 of rhyolite and ignimbrite (> 97.4%).The location of the andesites and vent alignments suggest a source from a subduction zone underlying the area. However, the lavas differ chemically from island-arc andesites such as those of Tonga; in particular by having higher contents of the alkali elements, light REE and Sr and Pb isotopes. This suggests some crustal contamination, and it is considered that this may occur beneath the wide accretionary prism of the subduction system. Amphibolite of the subduction zone will break down between 80 and 100 km and a partial melt will rise. A multi-stage process of magma genesis is then likely to occur. High-Al basalts are thought to be derived from partial melting of a garnet-free peridotite near the top of the mantle wedge overlying the subduction zone, locations of the vents controlled largely by faults within the crust. Rhyolites and ignimbrites were probably derived from partial melting of Mesozoic greywacke and argillite under the Taupo Volcanic Zone. Initial partial melting may have been due to hydration of the base of the crust; the “water” having come from dehydration of the downgoing slab. The partial melts would rise to form granodiorite plutons and final release of the magma to form rhyolites and ignimbrites was allowed because of extension within the Taupo graben.Dacites of the Bay of Plenty probably resulted from mixing of andesitic magma with small amounts of rhyolitic magma, but those on the eastern side of the Rotorua-Taupo area were more likely formed by a higher degree of partial melting of the Mesozoic greywacke-argillite basement. This may be due to intrusion of andesite magma on this side of the Taupo volcanic zone.  相似文献   

5.
The Volcanic Sedimentary Complex (VSC) of the Iberian Pyrite Belt (IPB) in southern Portugal and Spain, comprises an Upper Devonian to Lower Carboniferous submarine succession with a variety of felsic volcanic lithofacies. The architecture of the felsic volcanic centres includes felsic lavas/domes, pyroclastic units, intrusions and minor mafic units that define lava–cryptodome–pumice cone volcanoes. The diversity of volcanic lithofacies recognized in different areas of the IPB mainly reflects variations in proximity to source, but also differences in the eruption style. The IPB volcanoes are intrabasinal, range in length from 2 km to > 8 km and their thickest sections vary from ∼ 400 m to > 800 m. These volcanoes are dominated by felsic lavas/domes that occur at several stratigraphic positions within the volcanic centre, however the pyroclastic units are also abundant and are spatially related to the lavas/domes. The intrusions are minor, and define cryptodomes and partly-extrusive cryptodomes. The hydrothermal systems that formed the Neves Corvo and Lousal massive sulfide ore deposits are associated with effusive units of felsic volcanic centres. At Neves Corvo, the massive sulfide orebodies are associated to rhyolitic lavas that overlie relatively thick fiamme-rich pyroclastic unit. In several other locations within the belt, pyroclastic units contain sulfide clasts that may have been derived from yet to be discovered coeval massive sulfide deposits at or below the sea floor, which enhances the exploration potential of these pyroclastic units and demonstrates the need for volcanic facies analysis in exploration.  相似文献   

6.
O’a is the largest of the Quaternary caldera volcanoes that punctuate the axis of the Ethiopian rift valley. The known volcanic history of O’a is brief: eruptions of restricted ash-flow tuffs and «tufolavas» were followed by extensive pumice deposition with intervening paleosols, lacustrine sediments, and flows of occasional welded tuffs and rare basalts. Ensuing caldera collapse at c. 0.24 m.y. ago was accompanied by emplacement of two massive ignimbrite flow units comprising a single cooling unit: the first was much more severely welded than the second which shows lahar characteristics. Post-caldera volcanism at O’a has been sparse compared with most other Ethiopian rift centres. O’a volcano exemplifies the common rift association of a caldera set tightly between two offset segments of the Wonji fault belt. The Wonji fault belt marks the youngest tectonism of the rift floor, and in the vicinity of O’a has been active in a major way since caldera subsidence. This faulting is clearly younger than the massive rift margin faulting, which to the northeast of O’a occurred during a tectonic climax dated at c. 1.0 m.y. ago. Radiometric analysis suggests a rather regular level of initial40Ar in O’a basalt lavas sampled near to their original vents. If this level also applies to near-vent basalts dated from other parts of the Ethiopian rift, a regional rift paroxysm of crustal extension and related silicic and basaltic volcanism is evident at c. 0.30–0.20 m.y. ago. Episodic dilatation and associated volcano-tectonism separated by long periods of quiescence appears to be a general feature of continental rift valleys.  相似文献   

7.
Bimodal volcanism, normal faulting, rapid sedimentation, and hydrothermal circulation characterize the rifting of the Izu-Bonin arc at 31°N. Analysis of the zigzag pattern, in plan view, of the normal faults that bound Sumisu Rift indicates that the extension direction (080° ± 10°) is orthogonal to the regional trend of the volcanic front. Normal faults divide the rift into an inner rift on the arc side, which is the locus for maximum subsidence and sedimentation, and an outer rift further west. Transfer zones that link opposing master faults and/or rift flank uplifts further subdivide the rift into three segments along strike. Volcanism is concentrated along the ENE-trending transfer zone which separates the northern and central rift segments. The differential motion across the zone is accommodated by interdigitating north-trending normal faults rather than by ENE-trending oblique-slip faults. Volcanism in the outer rift has built 50–700 m high edifices without summit craters whereas in the inner rift it has formed two multi-vent en echelon ridges (the largest is 600 m high and 16 km long). The volcanism is dominantly basaltic, with compositions reflecting mantle sources little influenced by arc components. An elongate rhyolite dome and low-temperature hydrothermal deposits occur at the en echelon step in the larger ridge, which is located at the intersection of the transfer zone with the inner rift. The chimneys, veins, and crusts are composed of silica, barite and iron oxide, and are of similar composition to the ferruginous chert that mantles the Kuroko deposits. A 1.2-km transect of seven alvin heat flow measurements at 30°48.5′N showed that the inner-rift-bounding faults may serve as water recharge zones, but that they are not necessarily areas of focussed hydrothermal outflow, which instead occurs through the thick basin sediments. The rift basin and arc margin sediments are probably dominated by permeable rhyolitic pumice and ash erupted from submarine arc calderas such as Sumisu and South Sumisu volcanoes.  相似文献   

8.
An extensive rhyolitic dyke swarm has intruded subaqueous pyroclastic deposits, iron-formations, hyaloclastite breccias and lava flows of the 2730 Ma Hunter Mine Group (HMG) in the south-central part of the Archean Abitibi belt, Quebec. The dyke swarm has a minimum width of 500 m and can be traced perpendicular to the section for 2.4 km. Based on crosscutting relationships, chilled margins, quartz content and colour, five distinct dyke generations have been established. Each dyke generation has several magmatic pulses as indicated by parallel rows of columnar joints. Absence of brecciation between parallel rows suggests extremely brief intervals between magma pulses. The central parts of most dykes display inverted V-shaped patterns of columnar-joint convergence, inferred to indicate differential cooling during the late stages of dyke propagation. The dykes commonly display delicate spherulites suggesting rapid cooling, solidification temperatures between 400 and 600°C and penecontemporaneous devitrification. Quartz-feldspar aggregates in the groundmass have locally developed microgranophyric textures. Large spherulites near the chilled margins probably formed at temperatures below 400°C. Percolation of abundant water throughout the dyke complex is suggested by ubiquitous prominent chilled dyke margins. Development of a chilled margin 500 m along one dyke suggests that water percolated at least 500 m below the water/rock interface. Because the dykes intruded subaqueous pyroclastic deposits of similar composition, dyke emplacement below the sea floor is inferred. Interstratification of pillowed flows and brecciated pillowed flows containing rhyolite fragments at the top of the 4–5-km-thick sequence indicates that the central felsic complex probably never emerged during its evolutionary history, supporting the contention that the felsic dyke complex was emplaced beneath the Archean sea floor.  相似文献   

9.
Abstract Multi- and single-channel seismic profiles are used to investigate the structural evolution of back-arc rifting in the intra-oceanic Izu-Bonin Arc. Hachijo and Aoga Shima Rifts, located west of the Izu-Bonin frontal arc, are bounded along-strike by structural and volcanic highs west of Kurose Hole, North Aoga Shima Caldera and Myojin Sho arc volcanoes. Zig-zag and curvilinear faults subdivide the rifts longitudinally into an arc margin (AM), inner rift, outer rift and proto-remnant arc margin (PRA). Hachijo Rift is 65 km long and 20–40 km wide. Aoga Shima Rift is 70 km long and up to 45 km wide. Large-offset border fault zones, with convex and concave dip slopes and uplifted rift flanks, occur along the east (AM) side of the Hachijo Rift and along the west (PRA) side of the Aoga Shima Rift. No cross-rift structures are observed at the transfer zone between these two regions; differential strain may be accommodated by interdigitating rift-parallel faults rather than by strike- or oblique-slip faults. In the Aoga Shima Rift, a 12 km long flank uplift, facing the flank uplift of the PRA, extends northeast from beneath the Myojin Knoll Caldera. Fore-arc sedimentary sequences onlap this uplift creating an unconformity that constrains rift onset to ～1-2Ma. Estimates of extension (～3km) and inferred age suggest that these rifts are in the early syn-rift stage of back-arc formation. A two-stage evolution of early back-arc structural evolution is proposed: initially, half-graben form with synthetically faulted, structural rollovers (ramping side of the half-graben) dipping towards zig-zagging large-offset border fault zones. The half-graben asymmetry alternates sides along-strike. The present ‘full-graben’ stage is dominated by rift-parallel hanging wall collapse and by antithetic faulting that concentrates subsidence in an inner rift. Structurally controlled back-arc magmatism occurs within the rift and PRA during both stages. Significant complications to this simple model occur in the Aoga Shima Rift where the east-dipping half-graben dips away from the flank uplift along the PRA. A linear zone of weakness caused by the greater temperatures and crustal thickness along the arc volcanic line controls the initial locus of rifting. Rifts are better developed between the arc edifices; intrusions may be accommodating extensional strain adjacent to the arc volcanoes. Pre-existing structures have little influence on rift evolution; the rifts cut across large structural and volcanic highs west of the North Aoga Shima Caldera and Aoga Shima. Large, rift-elongate volcanic ridges, usually extruded within the most extended inner rift between arc volcanoes, may be the precursors of sea floor spreading. As extension continues, the fissure ridges may become spreading cells and propagate toward the ends of the rifts (adjacent to the arc volcanoes), eventually coalescing with those in adjacent rift basins to form a continuous spreading centre. Analysis of the rift fault patterns suggests an extension direction of N80°E ± 10° that is orthogonal to the trend of the active volcanic arc (N10°W). The zig-zag pattern of border faults may indicate orthorhombic fault formation in response to this extension. Elongation of arc volcanic constructs may also be developed along one set of the possible orthorhombic orientations. Border fault formation may modify the regional stress field locally within the rift basin resulting in the formation of rift-parallel faults and emplacement of rift-parallel volcanic ridges. The border faults dip 45–55° near the surface and the majority of the basin subsidence is accommodated by only a few of these faults. Distinct border fault reflections decreases dips to only 30° at 2.5 km below the sea floor (possibly flattening to near horizontal at 2.8 km although the overlying rollover geometry shows a deeper detachment) suggesting that these rifting structures may be detached at extremely shallow crustal levels.  相似文献   

10.
The Pucón eruption was the largest Holocene explosive outburst of Volcán Villarrica, Chile. It discharged >1.0 km3 of basaltic-andesite magma and >0.8 km3 of pre-existing rock, forming a thin scoria-fall deposit overlain by voluminous ignimbrite intercalated with pyroclastic surge beds. The deposits are up to 70 m thick and are preserved up to 21 km from the present-day summit, post-eruptive lahar deposits extending farther. Two ignimbrite units are distinguished: a lower one (P1) in which all accidental lithic clasts are of volcanic origin and an upper unit (P2) in which basement granitoids also occur, both as free clasts and as xenoliths in scoria. P2 accounts for ∼80% of the erupted products. Following the initial scoria fallout phase, P1 pyroclastic flows swept down the northern and western flanks of the volcano, magma fragmentation during this phase being confined to within the volcanic edifice. Following a pause of at least a couple of days sufficient for wood devolatilization, eruption recommenced, the fragmentation level dropped to within the granitoid basement, and the pyroclastic flows of P2 were erupted. The first P2 flow had a highly turbulent front, laid down ignimbrite with large-scale cross-stratification and regressive bedforms, and sheared the ground; flow then waned and became confined to the southeastern flank. Following emplacement of pyroclastic surge deposits all across the volcano, the eruption terminated with pyroclastic flows down the northern flank. Multiple lahars were generated prior to the onset of a new eruptive cycle. Charcoal samples yield a probable eruption age of 3,510 ± 60 14C years BP.  相似文献   

11.
SeaBeam multibeam bathymetry obtained during cruise SO-69 of research vessel (R/V) Sonne defines the segmentation and structure of ∼ 300 km of the Mariana back-arc spreading center south of the Pagan fracture zone at 17°33'N. Eight ridge segments, ranging from 14 to 64 km in length, are displaced as much as 2.7–14.5 km by both right- (predominantly) and left-lateral offsets and transform faults. An axial ridge commonly occupies the middle portion of the rift valley and rises from 200 to 700 m above the adjacent sea floor, in places shoaling to a water depth of 3200 m. An exception is the 60-km-long segment between 16°58' and 17°33'N where single peaks only a few tens of meters high punctuate the rift axis. Photographic evidence and rock samples reveal the presence of mostly pillow lavas outcropping on the axial ridges or peaks whereas the deeper parts of the rift valley floor (max. depth 4900 m) are heavily to totally sedimented. Abundant talus ramps along fault scarps testify to ongoing disruption of the crust. Lozenge-shaped collapse structures are covered by layers of sediment up to tens of centimeters thick on the rift valley floor. The presence of discrete volcanic ridges in the southern Mariana back-arc spreading region suggests that emplacement of oceanic crust at this slow spreading center occurs by `multi-site' injection of magma. Along-axis variations in length, crestal depth, and size of the axial ridges can be best explained by different stages in the cyclicity of magma supply along-axis.  相似文献   

12.
Volcan Popocatepetl, which lies 70 km southeast of Mexico City, is one of the most famous andesite composite volcanoes in the world. With 5,450 m of elevation, it is the second highest peak of Mexico. Located 320 km north of the Middle America Trench, at the centre of the Mexican Volcanic Belt, Volcano Popocatepetl forms the southern active part of a northsouth volcanic complex, the northern part consisting of the eroded Volcano Iztaccihuatl.Since its earliest reported eruption in 1519, Volcano Popocatepetl has had a continuous fumarolic activity in its crater, and in frequent small eruptions (1720, 1802–1804, 1920). In contrast with this light activity, C14 data indicate pre-historical cycles of intense volcanism with paroxysmal pyroclastic eruptions (ash and pumice-flows) alternating with effusive phases and plinian air-fall deposits.The results of a volcanological study and the petrological characteristics of the main volcanic units show that Volcano Popocatepetl is composed of a primitive composite-volcano on which a recent summit cone is superimposed. It has been built during 2 very dissimilar volcanic periods linked by a transitional phase.
Le Volcan Popocatepetl (Mexique): structure, evolution pétrologique et risques
  相似文献   

13.
Flood basalts, such as the Deccan Traps of India, represent huge, typically fissure-fed volcanic provinces. We discuss the structural attributes and emplacement mechanics of a large, linear, tholeiitic dyke swarm exposed in the Nandurbar–Dhule area of the Deccan province. The swarm contains 210 dykes of dolerite and basalt >1 km in length, exposed over an area of 14,500 km2. The dykes intrude an exclusively basaltic lava pile, largely composed of highly weathered and zeolitized compound pahoehoe flows. The dykes range in length from <1 km to 79 km, and in thickness from 3 to 62 m. Almost all dykes are vertical, with the others nearly so. They show a strong preferred orientation, with a mean strike of N88°. Because they are not emplaced along faults or fractures, they indicate the regional minimum horizontal compressive stress (σ 3) to have been aligned ~N–S during swarm emplacement. The dykes have a negative power law length distribution but an irregular thickness distribution; the latter is uncommon among the other dyke swarms described worldwide. Dyke length is not correlated with dyke width. Using the aspect ratios (length/thickness) of several dykes, we calculate magmatic overpressures required for dyke emplacement, and depths to source magma chambers that are consistent with results of previous petrological and gravity modelling. The anomalously high source depths calculated for a few dykes may be an artifact of underestimated aspect ratios due to incomplete along-strike exposure. However, thermal erosion is a mechanism that can also explain this. Whereas several of the Nandurbar–Dhule dykes may be vertically injected dykes from shallow magma chambers, others, particularly the long ones, must have been formed by lateral injection from such chambers. The larger dykes could well have fed substantial (≥1,000 km3) and quickly emplaced (a few years) flood basalt lava flows. This work highlights some interesting and significant similarities, and contrasts, between the Nandurbar–Dhule dyke swarm and regional tholeiitic dyke swarms in Iceland, Sudan, and elsewhere. Editorial responsibility: J. White  相似文献   

14.
Basaltic rocks with low K, U and Th contents dominate the entire Volcanic Complex of the Doupovské hory Mts. Significant potassium anomaly exceeding 1.5 atomic wt.% of potassium over an area of 4 × 8 km and 2 atomic wt.% of potassium over an area of 2 × 6 km was defined by airborne gamma-ray spectrometry above the central part of the Doupovské hory Volcanic Complex. The following detailed field study, supported by field and laboratory gamma-spectrometry measurements and geochemical analyses of rock samples, resulted in discovery of a swarm of potassium-rich trachytic dykes. The existence of such highly-differentiated rocks in the volcanic complex was unknown till present. These dykes are commonly less than 1 m wide, but their potassium content varies between 4 and 8 atomic wt.%. Owing to this high-K composition and relative abundance of dykes, the dyke rocks significantly modify the regional pattern of gamma-spectrometry data. The potassium anomaly cannot be explained by the presence of Flurbühl intrusive body dominated by ijolites and essexites, as all these rocks are poor in K, with potassium typically not exceeding 1.5 wt.%. On the other hand, much more extensive intermediate trachybasaltic lavas with K content varying within the range 1.8–3 wt.% cause only minor or undetectable anomalies.  相似文献   

15.
Al Wahbah is a large (∼2.2 km diameter, ∼250 m deep) maar crater in the Harrat Kishb volcanic field in western Saudi Arabia. It cuts Proterozoic basement rocks and two Quaternary basanite lava flows, and is rimmed with an eroded tuff ring of debris from the phreatomagmatic explosion that generated the crater. A scoria cone on the northern wall of the crater was dissected by the explosion and exposes a dolerite plug that was intruded immediately prior to crater formation. The dolerite plug yields a 40Ar/39Ar age of 1.147 ± 0.004 Ma. This is the best possible estimate of the time Al Wahbah crater formed. It is a few tens of thousand years younger than the age of the lower and upper basalt flows, 1.261 ± 0.021 Ma and 1.178 ± 0.007 Ma respectively. A dolerite dyke exposed within the basement in the wall of the crater is dated at 1.886 ± 0.008 Ma. This is the most precise age so far determined for the initiation of basaltic volcanism of Harrat Kishb, and confirms that it is significantly younger than the other post-rift volcanic provinces in the region. This study provides constrains the timing of humid climatic conditions in the region and suggests that the Quaternary basaltic volcanism that stretches the length of the western side of the Arabian peninsula may prove to be useful for establishing palaeoclimatic conditions.  相似文献   

16.
We reconstructed the evolution of the volcanic activity within the central Garrotxa monogenetic Volcanic Field, the youngest volcanic area of the Iberian Peninsula, by investigating the stratigraphy of the volcanic successions and the morphology of the monogenetic eruptive centres. Analysis of this volcanic succession has been conducted following the Unconformity Bounded Stratigraphic Units criteria. The detailed stratigraphy of the volcanic successions shows that the central Garrotxa Volcanic Field (GVF) evolved through four main periods of volcanic activity (Synthems) represented by the eruptive products of the mafic monogenetic volcanoes and associated syn-eruptive reworked deposits (Eruptive Units) and by the inter-eruptive deposits (Epiclastic Units). The distribution and the morphologies of the monogenetic volcanoes suggest that feeder dykes were emplaced under influence of the present stress filed and along pre-existing fractures of the basement. Our facies analysis of the deposits and their distribution shows that migration of volcanism toward the centre of the basin was accompanied by a trend of increasing explosivity. Episodic hydromagmatism in central Garrotxa occurred without a specific geographic locus or obvious temporal correlation. Finally, by integrating field data with the stratigraphy extracted from water wells, we determined the volume of the volcanic deposits. The small average volume of products emitted during each eruptive period, and the long quiescence separating them, allow us to classify the GVF as a low-output rate volcanic field.  相似文献   

17.
Many volcanic rift zones show dikes that are oriented oblique rather than parallel to the morphological ridge axis. We have evidence that gravitational spreading of volcanoes may adjust the orientation of ascending dikes within the crust and segment them into en-echelon arrays. This is exemplified by the Desertas Islands which are the surface expression of a 60 km long submarine ridge in southeastern Madeira Archipelago. The azimuth of the main dike swarm (average = 145°) deviates significantly from that of the morphological ridge (163°) defining an en-echelon type arrangement. We propose that this deviation results from the gravitational stress field of the overlapping volcanic edifices, reinforced by volcano spreading on weak substratum. We tested our thesis experimentally by mounting analogue sand piles onto a sand and viscous PDMS substratum. Gravitational spreading of this setup produced en-echelon fractures that clearly mimic the dike orientations observed, with a deviation of 10°–32° between the model’s ridge axis and that of the main fracture swarm. Using simple numerical models of segmented dike intrusion we found systematic changes of displacement vectors with depth and also with distance to the rift zone resulting in a complex displacement field. We propose that at depth beneath the Desertas Islands, magmas ascended along the ridge to produce the overall present-day morphology. Above the oceanic basement, gravitational stress and volcano spreading adjusted the principal stress axes’ orientations causing counterclockwise dike rotation of up to 40°. This effect limits the possible extent of lateral dike propagation at shallow levels and may have strong control on rift evolution and flank stability. The results highlight the importance of gravitational stress as a major, if not dominant factor in the evolution of volcanic rift zones.Editorial responsibility: M Carroll  相似文献   

18.
The eruptions of the Soufrière Hills volcano on Montserrat (Lesser Antilles) from 1995 to present have draped parts of the island in fresh volcaniclastic deposits. Volcanic islands such as Montserrat are an important component of global weathering fluxes, due to high relief and runoff and high chemical and physical weathering rates of fresh volcaniclastic material. We examine the impact of the recent volcanism on the geochemistry of pre-existing hydrological systems and demonstrate that the initial chemical weathering yield of fresh volcanic material is higher than that from older deposits within the Lesser Antilles arc. The silicate weathering may have consumed 1.3% of the early CO2 emissions from the Soufrière Hills volcano. In contrast, extinct volcanic edifices such as the Centre Hills in central Montserrat are a net sink for atmospheric CO2 due to continued elevated weathering rates relative to continental silicate rock weathering. The role of an arc volcano as a source or sink for atmospheric CO2 is therefore critically dependent on the stage it occupies in its life cycle, changing from a net source to a net sink as the eruptive activity wanes. While the onset of the eruption has had a profound effect on the groundwater around the Soufrière Hills center, the geochemistry of springs in the Centre Hills 5 km to the north appear unaffected by the recent volcanism. This has implications for the potential risk, or lack thereof, of contamination of potable water supplies for the island’s inhabitants.  相似文献   

19.
The Reporoa Caldera occupies the northern end of the Reporoa Depression, previously described as a tectonic fault-angle depression. Earlier confirmation of the topographic basin as a caldera had been hindered by the lack of an associated young pyroclastic flow deposit of large enough volume to have caused caldera collapse. New exposures on the eastern margin of the Reporoa basin reveal thick lithic lag breccias (>30 m) interbedded within the 0.24 Ma Kaingaroa Ignimbrites. These ignimbrites were previously attributed to the adjacent Okataina Volcanic Centre. Lag breccia thicknesses and maximum clast sizes decrease rapidly outward from the caldera rim, and discrete breccias are absent from ignimbrite sections more than 3 km from the rim. The lithic lag breccias, together with structural and geophysical evidence, confirm Reporoa Caldera as the source of the c. 100 km3 Kaingaroa Ignimbrites, adding another major rhyolitic volcanic centre to the seven previously recognized in the Taupo Volcanic Zone. Other, older, calderas may also be present in the Reporoa Depression.  相似文献   

20.
Summary The application of the progressive thermal demagnetization procedure of volcanic rock debris has been frequently used to determine the emplacement temperatures of pyroclastic deposits and thus to characterize the nature of these volcanic deposits. This debris consists of a mixture of juvenile fragments derived from the explosive fragmentation of erupting magma and an assortment of lithic clasts derived mainly from the walls of a volcanic conduit, as well as from the ground. The temperature at which the clasts were deposited can be estimated by analyzing its remanent magnetization. To do this, oriented samples of clasts are subjected to progressive thermal demagnetization and the directions of the resulting remanent vectors provide the necessary information. Clasts of basalt, andesite, limestone, pumice and homebricks have previously been used to estimate the emplacement temperatures of pyroclastic deposits. According to our data, clasts of red sandstones also seem to be good carriers of thermoremanent magnetization. We have carried out a paleomagnetic study on a Quaternary, lithic-rich, massive, pyroclastic deposit from the Puig d'Adri volcano (Catalan Volcanic Zone), which contains a large number of red sandstone clasts. It is concluded that the studied deposit cannot be considered as a lahar or as a pyroclastic surge deposit, considering both the emplacement temperature and the morphological features.Presented at 3rd Biennial Meeting on New Trends in Geomagnetism, Smolenice Castle, West Slovakia, June 22–29, 1992  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号