首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Microstructure and cleavage development in selected slates   总被引：1，自引：0，他引：1  
A detailed microstructural study of three slates by high voltage transmission electron microscopy is reported. The slates are mineralogically similar, come from minor fold cores and exhibit differing degrees of cleavage intensity. All three slates have domains of orientated phyllosilicates (cleavage lamellae) which contain only a low percentage of quartz and carbonate. Between these lamellae are lenticular domains which contain deformed phyllosilicates and which are enriched in secondary minerals. The initiation of cleavage lamellae can be clearly observed in electron micrographs from one of the slates studied. It occurs along zones of intense deformation, viz. along kinks and microfolds, which form from initial crenulations that are difficult to detect in a petrological microscope.The important observed re-orientation mechanisms of the phyllosilicates during cleavage development in the three slates are strain induced crystallization and the growth of metamorphically stable phyllosilicates together with mechanical rotation. Microstructural evidence suggests that the cleavage lamellae once initiated can extend laterally into the lenticular domains as deformation proceeds. Interference between adjacent phyllosilicates during deformation is commonly observed and resultant extension sites are often enriched in secondary minerals. Chlorite rich pods occur in all of the slates studied and have complex microstructures consisting of both deformed and undeformed phyllosilicates. It is concluded that these pods may form after cleavage initiation.  相似文献   

2.
Exsolution lamellae of pyroxene in garnet (grt), coesite in titanite and omphacite from UHPM terranes are widely accepted as products of decompression. However, interpretation of oriented lamellae of phyllosilicates, framework silicates and oxides as a product of decompression of pyroxene is very often under debate. Results are presented here of FIB‐TEM, FEG‐EMP and synchrotron‐assisted infrared (IR) spectroscopy studies of phlogopite (Phlog) and phlogopite + quartz (Qtz) lamellae in diamond‐bearing clinopyroxene (Cpx) from ultra‐high pressure (UHP) marble. These techniques allowed collection of three‐dimensional information from the grain boundaries of both the single (phlogopite), two‐phase lamellae (phlogopite + quartz), and fluid inclusions inside of diamond included in K‐rich Cpx and understanding their relationships and mechanisms of formation. The Cpx grains contain in their cores lamellae‐I, which are represented by topotactically oriented extremely thin lamellae of phlogopite (that generally are two units cell wide but locally can be seen to be somewhat broader) and microdiamond. The core composition is: (Ca0.94K0.04Na0.02) (Al0.06Fe0.08Mg0.88) (Si1.98Al0.02)O6.00. Fluid inclusions rich in K and Si are recognized in the core of the Cpx, having no visible connections to the lamellae‐I. Lamellar‐II inclusions consist of micron‐size single laths of phlogopite and lens‐like quartz or slightly elongated phlogopite + quartz intergrowths; all are situated in the rim zone of the Cpx. The composition of the rim is (Ca0.95Fe0.03Na0.02) (Al0.05Fe0.05Mg0.90)Si2O6, and the rim contains more Ca, Mg then the core, with no K there. Such chemical tests support our microstructural observations and conclusion that the phlogopite lamellae‐I are exsolved from the K‐rich Cpx‐precursor during decompression. It is assumed that Cpx‐precursor was also enriched in H2O, because diamond included in the core of this Cpx contains fluid inclusions. The synchrotron IR spectra of such diamond record the presence of OH? stretching and H2O bending motion regions. Lamellar‐II inclusions are interpreted as forming partly because of modification of the lamellae‐I in the presence of fluid enriched in K, Fe and Si during deformation of the host diopside; the latter is probably related to the shallower stage of exhumation of the UHP marble. This study emphasizes that in each case to understand the mechanism of lamellar inclusion formation more detailed studies are needed combining both compositional, structural and three‐dimensional textural features of lamellar inclusions and their host.  相似文献   

3.
Coarse-grained muscovite, biotite, and chlorite from the Lawler Peak granite, Yavapai County, Arizona, have been studied with electron microprobe analysis, powder X-ray diffraction, transmission electron microscopy (TEM), electron diffraction, and analytical TEM methods. All three sheet silicates exhibit multiple polytypes and an abundance of stacking faults and dislocations. Chlorite formed by subsolidus replacement of biotite. Muscovite also may have formed by replacement of biotite and other minerals, but there is no clear microstructural evidence to support either a primary or secondary origin for the coarse-grained muscovite. X-ray and electron diffraction reveal that the muscovite consists of two separate phases, which give rise to splitting of diffraction maxima. TEM experiments suggest that the two components resulted from exsolution, which produced two symmetry-related sets of irrationally oriented lamellae with a wavelength averaging about 10 nm. Exsolution occurred in both 1M and 2M1 muscovite. Although the lamellae are too small to analyze directly, the muscovite bulk composition and structural data are consistent with the separation of celadonitic and muscovite components.  相似文献   

4.
The results of a detailed microstructural and microchemical study of a slate from the Chewton area, Victoria, Australia are reported in which it was found that cleavage developed from microcrenulations. Phyllosilicates in P-domains differed in their chemistry from those in Q-domains and were concentrated in the P-domains by localized metamorphic reactions which were aided by mechanical rotation and solution processes. Wide, dark cleavage lamellae, often taken as evidence for the passive concentration of insoluble minerals, appear to have had a similar origin. The P-domains exhibited two types of microstructure, one which was consistent with annealing and the other with deformation within the domain. Cataclasites had formed along some P-domains, suggesting that they had become preferential sites for late phase brittle deformation.  相似文献   

5.
Within an analysed garnet porphyroblast, opaque inclusions imaged with the backscatter facility of a scanning electron microscope show different microtextures depending on their position within the porphyroblast. Three different zones can been distinguished: Zone 1 contains a Ti‐rich magnetite that has decomposed to a symplectite of fine and narrowly spaced exsolution lamellae of ilmenite and magnetite. Zone 2 shows a Ti‐rich magnetite symplectite with thicker and more widely spaced exsolution lamellae of ilmenite and magnetite. Within zone 3, Ti‐rich magnetite symplectite has totally been replaced by recrystallized magnetite crystals bordered by a thin ilmenite rim. Similar microtextures within ulvöspinel‐rich magnetite have elsewhere shown to be the result of an increase in oxidation and rate of diffusion. During metamorphism of metapelites, such an increase can be reasonably envisaged because of dehydration reactions progressing during rising temperatures, and this has occurred during the overgrowth of the three different microtextures by the garnet porphyroblast. Because the microtextures are homogeneous within the three different zones, it is deduced that the oxidation reaction rate of the opaque inclusions was substantially lower than the garnet growth rate. As a consequence, hiatuses in the garnet growth history must have occurred between the evolution from one microtexture to the next. A comparison between the inclusion trail geometry and the microtextural zone boundaries shows a perfect coincidence between these and the sites where inclusion trails become strongly deflected and truncated. This correlation confirms that, in the studied case, sharp microstructural boundaries (as truncation zones or deflection zones) coincide with growth hiatuses. The study therefore highlights the potential use of opaque inclusions to confirm or reject the occurrence of growth hiatuses within garnet porphyroblasts, especially in cases where discontinuities in the inclusion trail patterns are otherwise arbitrarily associated with growth hiatuses.  相似文献   

6.
通过显微和亚微分析揭示出辽东地区3种变形特点的角闪质岩石（片麻状斜长角闪岩、条带状斜长角闪岩和糜棱状斜长角闪岩）具有差异的显微及亚微构造。通过地质温压计计算,3种斜长角闪岩及其原岩的形成与变形温压条件具有从升温升压经降温升压到降温降压的变化规律（片麻状斜长角闪岩：597.0 ℃,0.536 GPa;条带状斜长角闪岩：617.3 ℃,0.455 GPa;糜棱状斜长角闪岩：558.8 ℃,0.514 GPa）。从其趋势和规律,结合显微构造分析,3种岩石是同一期变形不同阶段的产物。在递进变形作用过程中,塑性变形是斜长角闪岩流动和蠕变的主要机制。结合前人的实验变形结果,修正了大陆岩石圈结构模型。  相似文献   

7.
The alkali-feldspar and biotite in the sillimanite-biotite-garnet gneiss from East Antarctica preserves characteristic microstructural evidence of multi-stage H2O supplement during the retrograde metamorphism. The first microstructural evidence is the “zoned feldspar,” in which the mesoperthitic zone, the anti-perthitic zone, and lamella-free plagioclase zone coexist within a single crystal. They are occasionally found next to biotite, and are always depleted in orthoclase (Or) component toward the biotite. The formation process of this microstructure could be explained by the diffusion that oversteps the solvus. The second microstructural evidence is the serrate boundary between alkali-feldspar and biotite. The projections of biotite are selectively developed next to Or lamellae of alkali-feldspar every 3–5 μm. These two microstructures would have formed as the biotite grew by consuming potash in alkali-feldspar when H2O-bearing fluid locally passed through the grain boundaries. The former microstructure was formed at 825–900 °C before lamella formation, and the latter microstructure was formed after the lamella formation. These microstructures are the indicators of fluid pathways formed under two different temperature conditions. The common coexistence of these microstructures implies that the fluid used similar pathways during the retrograde metamorphism.  相似文献   

8.
Phenocrysts of phlogopite from a micaceous kimberlite contain finely interlayered serpentine. These phenocrysts occur in the kimberlite groundmass and are altered along the mica layers and are slightly deformed. Lizardite is the predominant serpentine mineral, but chrysotile and mixed structures also occur. The lizardite occurs as lamellae within phlogopite, oriented such that (001) layers of the two minerals are parallel and the [100] direction of lizardite is parallel to the [100] or 110 directions of phlogopite. The serpentinized regions of phlogopite are localized and extensive along the (001) layers. Chrysotile fibers and chrysotile-like curled serpentine occur within regions of disrupted material, and polygonal structures occur in folded lizardite lamellae. Textural relations suggest three events: 1) replacement of phlogopite by lizardite, 2) deformation of the phenocrysts, and 3) partial transformation of the lizardite to chrysotile-like structures. Deformation features include openings along (001), folds, and regions of disrupted or broken material. The folded and broken material consists of lamellar lizardite and phlogopite, indicating that lamellar replacement preceded deformation. Intergrowths of lizardite and curled serpentine are associated with cleavage openings and voids in disrupted material, suggesting that a partial transformation of lizardite to chrysotile occurred within openings created by deformation. Clay minerals also occur within phlogopite as either a minor product of serpentinization or of late-stage alteration.  相似文献   

9.
In No. 50 kimberlite pipe of Fuxian County, Liaoning Province, an eclogite inclusion(nodule), which is extremely rare in kimberlites, was discovered and phlogopite exsolutionlamellae were found in garnets of the inclusion. Microscopic, TEM and energy spectral observa-tions and studies confirmed that these lamellae are phlogopite. They are colourless and acicularin section, generally 0.5-5μm in width and 10-100μm in length. Nevertheless, fine lamellae,0.05-0.1μm wide and 1-2μm long, are also well developed. Along [111] of the garnet, three setsof phlogopite lamellae show oriented arrangement approximately at angles of 60°-70°, indi-cating that these lamellae might be the product of exsolution from garnet as a result ofpressure-release when eclogite ascended from the relatively deep level to the relatively shallowlevel of the mantle. Tiny acicular exsolution minerals (or inclusions) are commonly found ingarnet and pyroxene in eclogite inclusions of kimberlites all over the world and it has been re-ported that the identified exsolution minerals include pyroxene and rutile. This is the first timethat phlogopite exsolution lamillae were found in eclogite inclusions in the world.  相似文献   

10.
Ivar B. Ramberg 《Lithos》1972,5(4):281-306
Three occurrences of braid perthite (lamellae parallel to (110) and ( )) and micro braid perthite (lamellae parallel to ( ) and ( )) from Permian nepheline syenite pegmatites in monzonite (larvikite) of the Oslo Graben are described. All the crystals studied show a zoned arrangement with either alternating mmacro- and microperthitic bands parallel to (010) or with microperthitic cores surrounded by macroperthite and a marginal zone of plagioclase. Both types of perthite are mesoperthitic and composed of maximum microcline and low albite. Chemical analyses suggest that the alkali feldspar is stoichiometric, while precession exposures imply unusual cell parameters in the host K-feldspar phase. The macroperthite seems to have crystallized at the expense of the microperthite. The braided texture of exsolved albite lamellae may be due to some kind of strain causing cracking along the prism and pyramidal planes.  相似文献   

11.
OTTEN  MAX T. 《Journal of Petrology》1985,26(2):488-514
A transmission electron microscope study of the microstructuresof olivine, augite and ortho-pyroxene in the Artfj?llet gabbroshows that the gabbro has been affected by two phases of deformation,exsolution and alteration. During the first phase, deformationand annealing of olivine led to the formation of elongated subgrains,with (100) subgrain boundaries consisting of regularly spacededge dislocations with [100] Burgers vectors. Localized strongerdeformation resulted in the development of mosaic subgrainswith (100) and (001) boundaries. Exsolution produced blebs and(100) lamellae of orthopyroxene in augite. Two types of blebsoccur, referred to as symplectitic augite and blebby augite.Symplectitic augite formed through discontinuous precipitation.The blebs in blebby augite are considered to have nucleatedat subgrain boundaries or dislocations in the augite. Blebs,melon pips and (100) lamellae of augite formed in orthopyroxene.These blebs and melon pips are thought to be due to nucleationat dislocations or to thickening of (100) lamellae at dislocations.Brown hornblende formed as blebs in augite and to a lesser extentorthopyroxene. This first event took place while the gabbrowas at a temperature of c. 900-1000 ?C and is thought to berelated to D2b, a regional flattening and thrusting event. Renewed exsolution in the pyroxenes occurred later, probablybefore the second subsolidus phase, -but its timing is poorlyconstrained. "100" lamellae of low-Ca clinopyroxene formed inaugite at an estimated temperature of c. 600 ?C. Thin (100)lamellae and Guinier-Preston zones were developed in orthopyroxene. During the second phase, deformation resulted mainly in cracks,along which hydrous fluids entered the gabbro, causing a variabledegree of metamorphism at a temperature of c. 500-550 ?C. Inolivine irregular dislocations of mixed edge-screw characterformed. Cr-spinel with an unknown phase, or magnetite with diopsideprecipitated in the olivine. Oxide minerals formed in the pyroxenesand brown hornblende: Cr-spinel in Cr-rich augite; rutile andilmenite in other augite, orthopyroxene and brown hornblende.The formation of these oxide minerals is thought to be due toexsolution of cations such as Ti and Cr, which these mineralsdo not tolerate in their structures at low temperatures, combinedwith oxidation in the case of magnetite in olivine. Alterationresulted in thin amphibole lamellae parallel to (010) in augite.This second subsolidus phase is correlated with the D3 regionaldeformation phase and the concomitant retrograde metamorphism.  相似文献   

12.
Compression and extension axes are deduced from quartz deformation lamellae in a quartzite and a graywacke folded into an asymetrical syncline. Deformation lamellae fabrics in the two sandstones are distinctly different. In the graywacke, regardless of bedding orientation or position on the fold, compression axes are normal or nearly normal to the axial planar rough cleavage. Extension axes generally lie in the cleavage plane, parallel to dip. In most quartzite samples, compression axes are parallel or subparallel to bedding, at high angles to the fold axis and extension axes are normal to bedding. Two samples from the very base of the formation indicate compression parallel to the fold axis with extension parallel to bedding, at high angles to the fold axis. One of these two shows both patterns. The lamellae fabric geometry in these two samples suggests the presence of a neutral surface in the quartzite. The lamellae-derived compression and extension axes are in good agreement with the buckling behavior of a viscous layer (quartzite) embedded in a less viscous medium (graywacke and shale below and shale and carbonate above).  相似文献   

13.
Four different types of pyroxene found in a Beaver Bay ferrogabbro were analysed by microprobe. The crystallization sequence of pyroxene is augite-ferroaugite with exsolution lamellae of Ca-poor clinopyroxene → ferropigeonite with exsolution lamellae of augite → ferrohypersthene without exsolution lamellae+augite and ferroaugite without exsolution lamellae. The core of augite-ferroaugite with exsolution lamellae is cumulus pyroxene, whereas others, including the margin of augite-ferroaugite with lamellae, are interpreted to have crystallized from the intercumulus liquid. The sequence of crystallization of minerals from intercumulus liquid is different from that of minerals which have accumulated successively to the bottom and which were related to the fractionation of the whole layered series. The difference may be attributed to the different oxidation state of crystallization.  相似文献   

14.
本文通过对断裂构造岩显微构造特征的研究,进而对石英变形纹及光轴系统测量统计,进行岩组动力学分析,重建了断裂活动时的应力场特征及演化。并对断裂空间分布,断裂性质,运动方式、方向,生成环境及活动时期等作出推论。从而验证和进一步揭示了断裂的宏观构造特征。  相似文献   

15.
脆性断层运动学研究新进展   总被引：1，自引：0，他引：1  
本文概述了80年代以来脆性断层运动研究方面的某些成果。介绍了脆性断层带中的一些小构造和显微构造的几何特征以及它们的运动学意义。重点论述了从露头尺度到薄片尺度确定脆性断层运动方向的三种构造判据,既从属裂隙、岩桥构造和方解石e双晶判据。  相似文献   

16.
阿尔金断裂带中段出露一套走滑过程中形成的花岗质和角闪质糜棱岩。从糜棱岩中分选出3种类型的锆石:岩浆成因的长柱状锆石、柱状锆石和变质成因的次浑圆状锆石。这3种锆石的显微结构和构造特征以及它们内部的矿物包裹体均有所区别。其中长柱状锆石在岩石中定向排列,晶体长轴方向与拉伸线理方向一致,并且内部的所有矿物包裹体的长轴方向均与锆石的长轴方向平行,即与拉伸线理方向平行;拉曼研究表明包裹体矿物具熔融相特征;阴极发光图像中反映出这种锆石具有相对均一的内部结构。因此,该长柱状锆石是在韧性剪切过程中部分熔融环境下快速定向生长的,不仅代表了走滑剪切过程中的剪切应变方向,而且其生长年龄代表了走滑剪切的时代。  相似文献   

17.
Summary Titanium placer deposits occur in alluvial-fluvial drainage systems which dissect Moldanubian gneisses intruded by Late Variscan pegmatites (Hagendorf province) in southern Germany. Based upon their texture (zonation, exsolution lamellae, intergrowth), microchemical data (Nb, Cr, Ta, V, Fe, W, Sn) and mineral inclusions, two major grain types of intergrown rutile and ilmenite have been established. Grains of type A are always zoned and consist of rutile cores enveloped by ilmenite containing small inclusions of wolframite. A core-rim transition zone is characterized by complex relations of rutile and ilmenite, with rutile lamellae being rich in Nb, V and Fe. Types B1 and B2 aggregates consist of ilmenite with lamellae of niobian rutile and/or ilmenorutile, and additionally have inclusions of ferrocolumbite, pyrochlore, betafite, sphalerite, pyrrhotite and Fe oxides. Such grain types featuring an intimate intergrowth of rutile and ilmenite were called nigrine. Type-C grains are quite similar in their morphological appearance but consist of W-enriched rutile devoid of mineral inclusions and reaction products. Pseudorutile and leucoxene replacing minerals of the nigrine aggregates are presumably caused by supergene alteration under fluctuating redox conditions. Phosphate and aluminum remobilized by supergene processes led to the formation of hydrous Ti-rich phases containing Al, P and Fe. High Nb and W concentrations in nigrine aggregates and in rutile type C may be taken as a marker for highly differentiated granites or pegmatites. This has implications for both, heavy-mineral-based provenance analysis and stream sediment exploration.  相似文献   

18.
花岗岩目前的ISMA分类不是一个系统的分类,花岗岩分类可能需要从花岗岩的起源来考虑。花岗岩源自变质岩,可能是来自地幔或玄武质岩浆底侵带来的热导致的下地壳底部发生部分熔融的熔体形成的。因此,花岗岩与变质岩源岩有成因联系和因果关系,变质岩为母,花岗岩为子。根据埃达克岩与残留相平衡的理论,埃达克岩形成于斜长石消失线之上。那么,出现在石榴石出现线之上的是什么花岗岩呢?出现在石榴石出现线之下的又是什么花岗岩呢?本文即尝试从这个思路来探讨花岗岩的分类,并采用大数据方法予以佐证,得到的初步结果可以将花岗岩分为3类:(1)位于斜长石消失线之上的为高Sr低Y型花岗岩(高压,代表加厚的地壳);(2)位于斜长石消失线与石榴石出现线之间的为低Sr低Y类型花岗岩(中压,代表正常厚度的地壳);(3)位于石榴石出现线之下的为高Y型花岗岩(低压,代表减薄的地壳)。大数据研究的结果支持上述分类,给出的地球化学标志大体是:Sr含量为400×10-6,Y含量为(20~35)×10-6。  相似文献   

19.
从储层砂岩岩体微观结构特征入手,对英台地区储层砂岩体的孔隙类型、孔隙组合特征和孔喉特征进行了研究,将砂岩体划分出粒间孔及胶结物未充满孔组合、正常粒间孔及次生粒间孔组合、溶蚀扩大孔及粒间溶孔组合、晶间孔隙组合、混合孔隙组合、胶结物内溶孔及无孔隙组合六种孔隙组合类型和大孔大喉模式、大孔小喉模式、小孔小喉模式、微孔微喉及孤立孔隙模式四种孔喉结构模式。利用这种孔隙组合类型和孔喉结构模式对储层进行分类及评价,为储层研究提供了一个新的途径和评价因素,为该区及类似地区的油气勘探和评价提供了一个重要依据。  相似文献   

20.
钛磁铁矿内部尖晶石出溶体的成分组成和形成机制对估算磁铁矿固溶体的成分以计算铁钛氧化物的氧逸度-温度具有重要意义.为了探究攀枝花钒钛磁铁矿中尖晶石的成因及形成机制,运用岩相观察和各种微区原位观测手段,系统研究了各类尖晶石的矿物学特征.尖晶石的粒度在纳微米之间,有3种类型:第1种为钛磁铁矿晶界处不规则的大颗粒尖晶石,Mg#为60~70;第2种为钛磁铁矿颗粒内部的粒状尖晶石,Mg#为71~77;第3种为沿钛磁铁矿（100）方向定向分布的尖晶石片晶,Mg#为75~77.3类尖晶石分别与磁铁矿主晶具有相同的取向关系:{111}Mag//{111}Spl,{110}Mag//{110}Spl和{100}Mag//{100}Spl.3类尖晶石均是磁铁矿主晶的出溶体,钛磁铁矿晶界处及其内部的粒状尖晶石的形成与某些晶体缺陷关系密切,是在降温过程中较早出溶的产物,尖晶石片晶在两者之后以旋节分解出溶形成.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号