首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In recent years, earthquake-triggered landslides have attracted much attention in the scientific community as a main form of seismic ground response. However, little work has been performed concerning the volume and gravitational potential energy reduction of earthquake-triggered landslides and their severe effect on landscape change. This paper presents a quantitative study on the volume, gravitational potential energy reduction, and change in landscape related to landslides triggered by the 14 April 2010 Yushu earthquake. At least 2,036 landslides were triggered by the earthquake. A total landslide scar area of 1.194 km2 was delineated from the visual interpretation of aerial photographs and satellite images and was supported by selected field checking. In this paper, we focus on possible answers to the following five questions: (1) What is the total volume of the 2,036 landslides triggered by the earthquake, and what is the average landslide erosion thickness in the earthquake-stricken area? (2) What are the elevations of all landslide materials in relation to pre- and post-landsliding? (3) How much was the gravitational potential energy reduced due to the sliding of these landslide materials? (4) What is the average elevation change caused by these landslides in the study area? (5) What is the vertical change of the regional centroid position above sea level, as induced by these landslides? It is concluded that the total volume of the 2,036 landslides is 2.9399?×?106 m3. The landslide erosion thickness throughout the study area is 2.02 mm. The materials of these landslides moved from an elevation of 4,145.243 to 4,104.697 m, resulting in a decreased distance of 40.546 m. The gravitational potential energy reduction related to the landslides triggered by the earthquake was 2.9213?×?1012 J. The average regional elevation of the study area is 4,427.160 m, a value consistent with the assumption that the accumulated materials were remained in situ. This value changes from 4,427.160 to 4,427.158 m with all landslide materials moved out of the study area, resulting in a reduction in elevation of 2 mm. Based on the assumption that all landslide materials moved out of the study area, the elevations of the centroid of the study area’s crust changed from 2,222.45967 to 2,222.45867 m, which means the centroid value decreased by 1 mm. This value is 0.001 mm when assuming that the materials were remained in situ, which is almost negligible, compared with the situation of “all landslide materials moved out of the study area.”  相似文献   

2.
在遥感解译、野外调查的基础上,采用高密度电法和电阻率测深法,并结合钻探对川西岷江河谷发育的尕米寺滑坡、俄寨村滑坡、格机寨滑坡等典型大型—巨型古滑坡的空间结构进行了勘探分析,有效确定了古滑坡的空间结构和滑带特征,并认为古滑坡的滑动面多具有高低阻相间的不稳定电性层,且滑坡前缘多位于不稳定电性层变薄收敛的地方。其中,俄寨村滑坡高低阻相间的不稳定电性层厚约0~45 m,为滑坡堆积层,古滑动面紧贴基岩面,滑动面平均埋深约30 m,弱风化基岩面埋深约5.6~61 m,强风化层厚约为3~12 m;尕米寺滑坡高低阻相间的不稳定电性层厚约2.5~43 m,为滑坡堆积层,沿剖面古滑动面平均埋深约35 m,在滑坡中部存在一圈闭的低阻异常体,推测为古河道,并与钻探结果相吻合,其埋深约56~96 m,弱风化基岩面埋深13.3~100 m,强风化及岩溶综合层厚一般约为5~20 m。基于古滑坡的地球物理勘探数据和解译结果,统计分析了川西岷江河谷地区大型—巨型古滑坡空间岩土体的地球物理物性参数,对指导该区滑坡调查分析具有重要的指导意义。  相似文献   

3.
Surface geophysics and a priori information were employed to delineate the subsurface geology at Idi-oro in Abijo, Ibeju Lekki area of Lagos, Nigeria for foundation investigation purpose. Resistivity measurement was conducted using 1-D and 2-D resistivity probing techniques. The resistivity measurements were made with ABEM tetrameter model SAS 1000 system. The 1-D vertical electrical resistivity sounding data were obtained using the Schlumberger electrode array while the 2-D resistivity data were obtained using the dipole–dipole array. The interpreted results revealed three to five subsurface geological layers. This is made up of the top soil with resistivity values that vary from 132.4 to over 2,313.5 Ω?m and thickness values that range from 0.3 to 4.8 m, the fine sand with resistivity values that vary from 221.0 to 3,032.7 Ω?m and thickness values that range from 0.4 to 5.5 m, the medium sand with resistivity values that vary from 202.8 to 1,247.7 Ω?m and thickness values that range from 4.9 to 58.4 m. On the other hand, the clayey sand has the resistivity values that vary from 146.1 to 1,744.0 Ω?m and thickness values that vary from 2.2 to 26.3 m, while the coarse sand has resistivity values that vary from 238.3 to 14,313.9 Ω?m but with no thickness value because the current terminated in this layer. The resistivity data correlate well with borehole logs. On the whole, it is concluded that the investigated area has competent sand layer that can support medium to giant engineering structures with resistivity values that vary from 202 to 14,314 Ω?m and thickness values that vary from 0.8 to 58.4 m.  相似文献   

4.
Chong Xu  Xiwei Xu  Guihua Yu 《Landslides》2013,10(4):421-431
On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194 km2. The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main co-seismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5 % of the total number) surface areas larger than 1,000 m2. The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5 km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000 m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q4 al-pl, N, and T3 kn 1 have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slipping-fault generated earthquake on a plateau.  相似文献   

5.
Subaerial landslides falling into confined water bodies often generate impulsive waves. Damaging landslide tsunamis in Three Gorges Reservoir, China, have struck several times in the last 15 years. On June 24, 2015, a 23?×?104 m3 slope failure occurred on the east bank of the Daning River opposite Wushan Town. The sliding mass intruded into the Three Gorges Reservoir and initiated a reservoir tsunami that resulted in two deaths and significant damage to shipping facilities. A post-event survey revealed the landslide geometry and wave run-up distribution, while an eyewitness video captured most of the landslide motion. Employing these firm constraints, we applied the Tsunami Squares method to simulate the 2015 Hongyanzi landslide and tsunami. The simulation revealed that the landslide experienced a progressive failure in the first few seconds and impacted the water with a maximum velocity of ~?16 m/s. The initial wave propagated to the opposite shore in an arch shape, and the water surface reached a maximum amplitude of ~?11 m near the landslide. Wave amplitude-time curves at four points on the river cross section show that the initial wave reached Wushan town in about 50 s with an average wave velocity of ~?30 m/s. The maximum wave run-ups on the shoreline opposite the landslide are around 6 m and attenuate to less than 1 m beyond 2-km distance. The landslide simulation matches the observed geological profile and the eyewitness video, and the numerical results coincide with the observed wave run-up heights. Nearly 80% of landslide energy is lost due to frictional resistances, but the remaining fraction imparted to the tsunami carried catastrophic consequences to a large region. The numerical results emphasize the efficiency and accuracy of Tsunami Squares method for a “Quick Look” simulation of a potential landslide.  相似文献   

6.
In the Three Gorges of China, there are frequent landslides, and the potential risk of landslides is tremendous. An efficient and accurate method of generating landslide susceptibility maps is very important to mitigate the loss of lives and properties caused by these landslides. This paper presents landslide susceptibility mapping on the Zigui-Badong of the Three Gorges, using rough sets and back-propagation neural networks (BPNNs). Landslide locations were obtained from a landslide inventory map, supported by field surveys. Twenty-two landslide-related factors were extracted from the 1:10,000-scale topographic maps, 1:50,000-scale geological maps, Landsat ETM + satellite images with a spatial resolution of 28.5 m, and HJ-A satellite images with a spatial resolution of 30 m. Twelve key environmental factors were selected as independent variables using the rough set and correlation coefficient analysis, including elevation, slope, profile curvature, catchment aspect, catchment height, distance from drainage, engineering rock group, distance from faults, slope structure, land cover, topographic wetness index, and normalized difference vegetation index. The initial, three-layered, and four-layered BPNN were trained and then used to map landslide susceptibility, respectively. To evaluate the models, the susceptibility maps were validated by comparing with the existing landslide locations according to the area under the curve. The four-layered BPNN outperforms the other two models with the best accuracy of 91.53 %. Approximately 91.37 % of landslides were classified as high and very high landslide-prone areas. The validation results show sufficient agreement between the obtained susceptibility maps and the existing landslide locations.  相似文献   

7.
Chong Xu  Xiwei Xu 《Natural Hazards》2014,72(2):871-893
The April 14, 2010 Yushu, China, earthquake (Mw 6.9) triggered a great number of landslides. At least 2,036 co-seismic landslides, with a total coverage area of 1.194 km2, were delineated by visual interpretation of aerial photographs and satellite images taken following the earthquake, and verified by field inspection. Based on the mapping results, a statistical analysis of the spatial distribution of these landslides is performed using the landslide area percentage (LAP), defined as the percentage of the area affected by the landslides, and landslide number density (LND), defined as the number of landslides per square kilometer. The purpose is to clarify how the landslides correlate the control factors, which are the elevation, slope angle, slope aspect, slope position, distance from drainages, lithology, distance from the surface rupture, and peak ground acceleration (PGA). The results show that both LAP and LND have strongly positive correlations with slope angle and negative correlations with distance from the surface rupture and distance from drainages. The highest LAP and LPD values are in places of elevations from 3,800 to 4,000 m. The slopes producing landslides are mostly facing toward NE, E, and SE. The geological units of Q4 al-pl, N, and T3 kn 1 have the highest concentrations of co-seismic landslides. No apparent correlations are present between LAP and LND values and PGA. On both sides of the surface rupture, the landslide distributions are almost similar except a few exceptions, likely associated with the nature of the strike-slip seismogenic fault for this event. The bivariate statistical analysis shows that, in descending order, the earthquake-triggered landslide impact factors are distance from surface rupture > slope angle > distance from drainages > lithology > PGA. Besides, as the detailed co-seismic landslides inventories related to strike-slip earthquakes are still few compared with that of thrusting-fault earthquakes, this case study would shed new light on the subject. For instance, the landslide spatial distribution on both sides of the strike-slip seismogenic fault is rather different from that of thrusting-fault earthquakes. It reminds us to take different strategies of measures for prevention and mitigation of landslides induced by earthquakes with different mechanisms.  相似文献   

8.
Panday  Suman  Dong  Jia-Jyun 《Landslides》2021,18(12):3875-3889

Continuous 5-day (August 4–9, 2019) torrential rainfall in the monsoon season triggered more than 90 landslides on northwest-southeast extended mountain range of Mon State, Myanmar. In this study, remote sensing images, DEM, and limited fieldworks were used to create the landslide inventory. The topography features of these landslides are analyzed via ArcGIS. The largest one occurred on 9 August 2019 and caused 75 deaths and 27 buildings were damaged. This landslide occurred on gentle topography (slope angle, 23°) with long run-out, in which the angle of reach was relatively low (10°). The volume was 111,878 m3 was mainly composed of weathered granite and red soil and the sliding depth was approximately 7.5 m. Topographic characteristics including the relative slope height, angle of reach, and slope angle of source area of 35 landslides with areas?>?4000 m2 were analyzed. The spatial distribution characteristics and topographic features of the 35 landslides below are distinguished: (1) the concentration of most of landslides on southwest-facing slopes showing the heterogeneous spatial distribution of landslide; (2) an uncommon landslide distribution in which more than half of landslide originates from upper slope; (3) the range of the angle of the source area (17°–38°) compatible with the internal friction angle of soils in tropical regions (17°–33°); and (4) the tangent of the angle of reach is generally smaller than 0.5 (angle of reach?<?27°) shows a relative high mobility and the relation between landslide mobility and the slope angle of the landslide source area is similar to the one of earthquake-triggered landslides, even though the triggering mechanism, landslide type, and landslide volume are dramatically different.

  相似文献   

9.
Extremely slow landslides, those with a displacement rate <16 mm/year, may be imperceptible without proper instrumentation. These landslides can cause infrastructure damage on a long-term timescale. The objective is to identify these landslides through the combination of information from the California landslide inventory (CLI) and ground displacement rates using results from persistent scatterer interferometry (PSI), an interferometric synthetic aperture radar (InSAR) stacking technique, across the Palos Verdes Peninsula in California. A total of 34 ENVISAT radar images (acquired between 2005 and 2010) and 40 COSMO-SkyMed radar images (acquired between 2012 and 2014) were processed. An InSAR landslide inventory (ILI) is created using four criteria: minimum PS count, average measured ground velocity, slope angle, and slope aspect. The ILI is divided into four categories: long-term slides (LTSs), potentially active slides (PASs), relatively stable slopes (RSSs), and unmapped extremely slow slides (UESSs). These categories are based on whether landslides were previously mapped on that slope (in the CLI), if persistent scatterers (PSs) are present, and whether PSs are unstable or stable. The final inventory includes 263 mapped landslides across the peninsula, of them 67 landslides were identified as UESS. Although UESS exhibit low velocity and are relatively small (average area of 8865 m2 per slide), their presence in a highly populated area such as the Palos Verdes Peninsula could lead to destruction of infrastructure and property over the long term.  相似文献   

10.
The present study aims to explain some hydrogeological problems that are related to geological setting in two wadis: El Kallabiyyah and As Sabil East Esna. For this purpose, land magnetic, vertical electrical soundings, and two-dimensional electrical resistivity imaging profiles were measured. The lithological succession comprises Upper Cretaceous to Quaternary deposits that rest on a Precambrian basement rock. The results of the interpretation of the land magnetic measurements in wadi El Kallabiyyah represent the depth to the basement rock which ranges from 260 to 660 m and increases towards the northeast trend, but in wadi As Sabil, there is a large basin at the center of the wadi with the recorded depth to the basement reaching 1,300 m due to the effect of two normal faults (F1 and F2). The results of the interpretation of the vertical electrical sounding and two-dimensional imaging confirmed the presence of these faults in wadi As Sabil. The results of the geoelectrical measurements in wadi El Kallabiyyah represented the water-bearing layer at the third unit that consists of sands, gravels, boulders, and clays. The presence of clay will affect the potentiality of a drilled well. For wadi As Sabil, the results of geoelectrical measurements led to the lower part of the second unit which acts as a water-bearing layer that consists of sands, boulders, gravels, and clays. It can be concluded that the best site for drilling wells in wadi El Kallabiyyah is at vertical electrical sounding no.5 with a total depth of not less than 230 m. In wadi As Sabil, the drilled wells must be concentrated at the center and the downstream.  相似文献   

11.
Towards hydrological triggering mechanisms of large deep-seated landslides   总被引：3，自引：3，他引：0  
It is a widely accepted idea that hydrologically triggered deep-seated landslides are initiated by an increase in pore-water pressure on potential slip surface induced by rising groundwater level after prolonged period of intense rainfall although the process is not fully understood. In order to contribute to better understanding, the rainfall–groundwater relationships, hydrogeological monitoring and repeated geoelectrical imaging were carried out from March 2007 to April 2011 in large deep-seated landslide near ?ubietová (Western Carpathians) catastrophically reactivated at the end of February 1977. Based on our observations, groundwater level (GWL) response to precipitation differs considerably with respect to both overall hydrological conditions and GWL mean depth. While the rate of GWL increase up to 25 cm/day were measured after some rainfall events during wet periods, noticeably lower recharge rate (up to 1–2 cm/day) and delayed GWL response to rainfall (usually from 2 weeks to 2–4 months) were observed at the beginning of the wet season after considerable depression of GWLs due to previous effective rainfall deficit. Likewise, slow GWL fluctuations without short-term oscillations are typical for deeper GWLs. Thus, long-term (several seasons to several years) hydrological conditions affect markedly groundwater response to rainfall events in the studied landslide and can be crucial for its behaviour. Comparison of hydrological conditions characterising the analysed period with those that accompanied the landslide reactivation in 1977 allow us to assume that slightly above-average rainy season following the prolonged wet period can be far more responsible for movement acceleration (and possibly failure initiation) in deep landslides than the isolated season of extreme precipitation following a longer dry period. This is true especially for landslides in regions with significant seasonal temperature changes where potential effective precipitation (PEP), calculated as excess of precipitation (P) over potential evapotranspiration (PET), may be efficiently used for estimation of slope saturation condition.  相似文献   

12.
Earthquakes in mountainous areas may produce many landslides that involve abundant snow, but few observations have been made of these hazardous phenomena. The 12 March 2011 north Nagano Prefecture earthquake (MJMA 6.7) occurred in a mountainous part of Japan that typically has an annual snow cover of more than 2 m, and it induced many snowy landslides. Some of these traveled relatively long distances. We examined the snowy Tatsunokuchi landslide to reconstruct the landsliding processes over deep snow. We infer that the Tatsunokuchi landslide occurred by collapse of a rock debris mass of 5?×?104 m3 that plunged into the abundant snow, forming a mixture of snow and rock debris, which then traveled on top of the snow. Later, the displaced mass included a large amount of snow which was pushed forward at the front and to the sides. The velocity of the landslide was estimated to be approximately 14 m/s. It appears that the displaced mass, having only a small proportion of rock debris, had a low enough density to travel easily on top of the snow. Our observations suggest that there was much liquid water at the base of the displaced mass shortly after the event. Our results suggest that landslides may damage wider areas than expected if they travel over deep snow.  相似文献   

13.
A novel study on using geoelectrical resistivity, soil property, and hydrogeochemical analysis methods for delineating and mapping of heavy metal in aquifer system is presented in this paper. A total of 47 surveys of geoelectrical resistivity with Wenner configuration were conducted to determine the subsurface and the groundwater characteristics. The groundwater sample from 53 existing wells and 2 new wells has been analyzed to derive their water chemical content. The chemical analysis was done on the soil sample obtained from new two wells and from selected locations. The water and soil chemical analysis results from the new two wells were used as calibration in resistivity interpretation. The occurrence of heavy metal in aquifer system was expected to detect using the geoelectrical resistivity survey for the whole study area. The result of groundwater analysis shows that the groundwater sample contains a relatively low concentration of Fe (<?0.3 mg/L) elongating from the south up to the middle region. While in the middle and the northwestern, Fe concentration is relatively high (around 12 mg/L). Chemical analysis of soil sample shows that in the lower resistivity zone (<?18 Ωm), Al and Fe concentrations are comparatively high with an average of 68,000 and 40,000 mg/kg, respectively. Starting from the middle to the northwestern zone, the resistivity value appears to be low. It is definitely caused by higher Al and Fe concentration within the soil, and it is supported also by lower total anion content in the groundwater. While the resistivity value of more than 40 Ωm in aquifers is obtained in the zone which Fe concentration is relatively lower in the soil but not present in the groundwater. Correlation Fe concentration in the soil and Fe concentration in the groundwater sample shows the trend of positively linear; however, the Al concentration in soil has no correlation with Al content in groundwater. Finally, the probability of high heavy metal zone in the aquifer system is easily delineated by the distribution of geoelectrical resistivity presented in depth slice shapes which extend from the Boundary Range Composite Batholith in the north to the northwest.  相似文献   

14.
The 2008 Ms 8.0 Wenchuan earthquake triggered a large number of extensive landslides. It also affected geologic properties of the mountains such that large-scale landslides followed the earthquake, resulting in the formation of a disaster chain. On 10 July 2013, a catastrophic landslide–debris flow suddenly occurred in the Dujiangyan area of Sichuan Province in southeast China. This caused the deaths of 166 people and the burying or damage of 11 buildings along the runout path. The landslide involved the failure of ≈1.47 million m3, and the displaced material from the source area was ≈0.3 million m3. This landslide displayed shear failure at a high level under the effects of a rainstorm, which impacted and scraped an accumulated layer underneath and a heavily weathered rock layer during the release of potential and kinetic energies. The landslide body entrained a large volume of surface residual diluvial soil, and then moved downstream along a gully to produce a debris flow disaster. This was determined to be a typical landslide–debris flow disaster type. The runout of displaced material had a horizontal extent of 1200 m and a vertical extent of 400 m. This was equivalent to the angle of reach (fahrböschung angle) of 19° and covered an area of 0.2 km2. The background and motion of the landslide are described in this study. On the basis of the above analysis, dynamic simulation software (DAN3D) and rheological models were used to simulate the runout behavior of the displaced landslide materials in order to provide information for the hazard zonation of similar types of potential landslide–debris flows in southeast China following the Wenchuan earthquake. The simulation results of the Sanxicun landslide revealed that the frictional model had the best performance for the source area, while the Voellmy model was most suitable for the scraping and accumulation areas. The simulations estimated that the motion could last for ≈70 s, with a maximum speed of 47.7 m/s.  相似文献   

15.
The 2015 Mw7.8 Gorkha earthquake triggered thousands of landslides of various types scattered over a large area. In the current study, we utilized pre- and post-earthquake high-resolution satellite imagery to compile two landslide inventories before and after earthquake and prepared three landslide susceptibility maps within 404 km2 area using frequency ratio (FR) model. From the study, we could map about 519 landslides including 178 pre-earthquake slides and 341 coseismic slides were identified. This study investigated the relationship between landslide occurrence and landslide causative factors, i.e., slope, aspect, altitude, plan curvature, lithology, land use, distance from streams, distance from road, distance from faults, and peak ground acceleration. The analysis showed that the majority of landslides both pre-earthquake and coseismic occurred at slope >30°, preferably in S, SE, and SW directions and within altitude ranging from 1000 to 1500 m and 1500 to 3500 m. Scatter plots between number of landslides per km?2 (LN) and percentage of landslide area (LA) and causative factors indicate that slope is the most influencing factor followed by lithology and PGA for the landslide formation. Higher landslide susceptibility before earthquake is observed along the road and rivers, whereas landslides after earthquake are triggered at steeper slopes and at higher altitudes. Combined susceptibility map indicates the effect of topography, geology, and land cover in the triggering of landslides in the entire basin. The resultant landslide susceptibility maps are verified through AUC showing success rates of 78, 81, and 77%, respectively. These susceptibility maps are helpful for engineers and planners for future development work in the landslide prone area.  相似文献   

16.
This is the first landslide inventory map in the island of Lefkada integrating satellite imagery and reports from field surveys. In particular, satellite imagery acquired before and after the 2003 earthquake were collected and interpreted with the results of the field survey that took place 1 week after this strong (Mw?=?6.3) event. The developed inventory map indicates that the density of landslides decreases from west to east. Furthermore, the spatial distribution of landslides was statistically analyzed in relation to the geology and topography for investigating their influence to landsliding. This was accomplished by overlaying these causal factors as thematic layers with landslide distribution data. Afterwards, weight values of each factor were calculated using the landslide index method and a landslide susceptibility map was developed. The susceptibility map indicates that the highest susceptibility class accounts for 38 % of the total landslide activity, while the three highest classes that cover the 10 % of the surface area, accounting for almost the 85 % of the active landslides. Our model was validated by applying the approaches of success and prediction rate to the dataset of landslides that was previously divided into two groups based on temporal criteria, estimation and validation group. The outcome of the validation dataset was that the highest susceptibility class concentrates 18 % of the total landslide activity. However, taking into account the frequency of landslides within the three highest susceptibility classes, more than 85 %, the model is characterized as reliable for a regional assessment of earthquake-induced landslides hazard.  相似文献   

17.
Landslides are the most established geological hazards in the frontal fold–thrust belt of Northwestern Himalaya comprising of Siwaliks and Murree strata. The continuous rainfall from 2 to 6 September, 2014 caused a massive landslide at village Sadal in Udhampur district of Jammu and Kashmir state. The landslide occurred in the early morning of September 6, 2014, destroying entire Sadal habitation comprising 45 houses, and killing 41 people and more than 500 domestic animals. Google earth images of pre and post-landslide events along with the field measurements show the kinematics of upper and lower parts of the slide. Horizontal and vertical components of displacement and mode of failure suggest the landslide as of complex nature. The shallow subsurface geophysical imaging through Ground Penetrating Radar (GPR) survey shows the failure plane composed of friable mudstone bed underlain by massive mudstone and overlain by cross-bedded sandstone. The depth of debris material above the failure plane ranges from 6 m at Site S1a-b to 10 m at Site-S2b and 20 m at Site S3a. The velocity analysis of Site-3 shows four thick layers represented from bottom to surface by L1—sandstone (V?=?0.16 m/ns, travel time?=?356.36 ns), L2—mudstone (V?=?0.17 m/ns, travel time?=?288.48 ns), L3—massive mudstone (V?=?0.19 m/ns, travel time 220.68 ns), and L4—cross-laminated sandstone (V?=?0.20 m/ns, travel time?=?77.58 ns) overlaying the failure plane. The study shows the landslide occur along the western limb of a fold identified during the present work. We mapped an old landslide on the same limb which shows 5–6 m-thick subsurface debris material with thick rock fragments involved in the landslide process. The detailed geological and geophysical investigations suggest that both the landslides were triggered by extreme rain fall events.  相似文献   

18.
Subaqueous landslides can induce potentially damaging tsunamis. Tsunamis are not restricted to the marine environment, but have also been documented on lakes in Switzerland and worldwide. For Lake Zurich (central Switzerland), previous work documented multiple, assumedly earthquake-triggered landslides. However, no information about past tsunamis is available for Lake Zurich. In a back-analysis, we model tsunami scenarios as a consequence of the earthquake-triggered landslides in the past. Furthermore, on the basis of a recent map of the earthquake-triggered subaqueous landslide hazard, we present results of a tsunami hazard assessment. The subaqueous landslide progression, wave propagation and inundation are calculated with a combination of open source codes. Although no historic evidence of past tsunamis has been documented for Lake Zurich, a tsunami hazard exists. However, only earthquakes with long return periods are assumed to cause considerable tsunamis. An earthquake with an exceedance probability of 0.5% in 50 years (corresponding to an earthquake with a return period of 9975 years) is assumed to cause tsunamigenic landslides on most lateral slopes of Lake Zurich. A hypothetical tsunami for such an event would create damage especially along the shores of the central basin of Lake Zurich with estimated peak flow depths of up to ~?4.6 m. Our results suggest that for an earthquake with an exceedance probability of 10% in 50 years (i.e., mean return period of 475 years), no considerable tsunami hazard is estimated. Even for a worst-case scenario, the cities of Zurich and Rapperswil, located at the northern and southern ends of the lake, respectively, are assumed to experience very little damage. The presented first-order results of estimated wave heights and inundated zones provide valuable information on tsunami-prone areas that can be used for further investigations and mitigation measures.  相似文献   

19.
Geometric parameters are useful for characterizing earthquake-triggered landslides. This paper presents a detailed statistical analysis on this issue using the landslide inventory of the 2013, Minxian, China Mw 5.9 earthquake. Based on GIS software and a 5-m resolution DEM, geometric parameters of 635 coseismic landslides (with areas larger than 500 m2) were obtained, including height, length, width, reach angle (arc tangent of the height-length ratio), and aspect ratio (length-width ratio). The fitting relationship of height and length from these data is H = 0.6164L + 0.4589, with an average reach angle of 31.65°. The landslide aspect ratios concentrate in the range of 1.4～2.6, with an average of 2.11. According to the plane geometric shapes and aspect ratios, the landslides are classified into four categories: transverse landslide (LA1, L/W ≤ 0.8), isometric landslide (LA2, 0.8 < L/W ≤ 1.2), longitudinal landslide (LA3, 1.2 < L/W ≤ 3), and elongated landslide (LA4, L/W > 3). Statistics of these four types of landslides versus ten classified control factors (elevation, slope angle, slope aspect, curvature, slope position, distance to drainages, lithology, seismic intensity, peak ground acceleration, and distance to seismogenic fault) are used to examine their possible correlations and the landslide-prone areas, which would be helpful to the landslide disaster mitigation in the affected area.  相似文献   

20.
Global climate change has increased the frequency of abnormally high rainfall; such high rainfall events in recent years have occurred in the mountainous areas of Taiwan. This study identifies historical earthquake- and typhoon-induced landslide dam formations in Taiwan along with the geomorphic characteristics of the landslides. Two separate groups of landslides are examined which are classified as those that were dammed by river water and those that were not. Our methodology applies spatial analysis using geographic information system (GIS) and models the geomorphic features with 20?×?20 m digital terrain mapping. The Spot 6 satellite images after Typhoon Morakot were used for an interpretation of the landslide areas. The multivariate statistical analysis is also used to find which major factors contribute to the formation of a landslide dam. The objective is to identify the possible locations of landslide dams by the geomorphic features of landslide-prone slopes. The selected nine geomorphic features include landslide area, slope, aspect, length, width, elevation change, runout distance, average landslide elevation, and river width. Our four geomorphic indexes include stream power, form factor, topographic wetness, and elevation–relief ratio. The features of the 28 river-damming landslides and of the 59 non-damming landslides are used for multivariate statistical analysis by Fisher discriminant analysis and logistic regression analysis. The principal component analysis screened out eleven major geomorphic features for landslide area, slope, aspect, elevation change, length, width, runout distance, average elevation, form factor, river width, stream power, and topography wetness. Results show that the correctness by Fisher discriminant analysis was 68.0 % and was 70.8 % by logistic regression analysis. This study suggests that using logistic regression analysis as the assessment model for identifying the potential location of a landslide dam is beneficial. Landslide threshold equations applying the geomorphic features of slope angle, angle of landslide elevation change, and river width (H L/W R) to identify the potential formation of natural dams are proposed for analysis. Disaster prevention and mitigation measures are enhanced when the locations of potential landslide dams are identified; further, in order to benefit such measures, dam volume estimates responsible for breaches are key.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号