共查询到20条相似文献，搜索用时 78 毫秒
1.
In the paper, we present newly developed hydro-mechanical hypoplastic model for partially saturated soils predicting small strain stiffness. Hysteretic void ratio dependent water retention model has been incorporated into the existing hypoplastic model. This required thorough revision of the model structure to allow for the hydro-mechanical coupling dependencies. The model is formulated in terms of degree of saturation, rather than of suction. Subsequently, the small strain stiffness effects were incorporated using the intergranular strain concept modified for unsaturated conditions. New features included degree of saturation-dependent size of the elastic range and an updated evolution equation for the intergranular strain. The model has been evaluated using two comprehensive data sets on completely decomposed tuff from Hong-Kong and Zenos Kaolin from Iran. It has been shown that the modified intergranular strain formulation coupled with the hysteretic water retention model correctly reproduces the effects of both the stress and suction histories on small strain stiffness evolution. The model can correctly predict also different other aspects of partially saturated soil behaviour, starting from the very small strain range up to the asymptotic large-strain response. 相似文献
2.
David Ma&#x;ín Claudio Tamagnini Gioacchino Viggiani Daniele Costanzo 《国际地质力学数值与分析法杂志》2006,30(13):1303-1336
In this paper, the performance of different advanced constitutive models for soils is evaluated with respect to the experimentally observed behaviour of a soft reconstituted clay subject to a wide range of loading directions, see (presented in the companion paper). The models considered include a three‐surface kinematic hardening elastoplastic model; the CLoE hypoplastic model; a recently proposed K‐hypoplastic model for clays, and an enhanced version of the same model incorporating the concept of intergranular strain. A clear qualitative picture of the relative performance of the different models as a function of the loading direction is obtained by means of the incremental strain response envelopes. The definition of suitable error measures allows to obtain further quantitative information in this respect. For the particular initial conditions and loading programme considered in this study, the kinematic hardening and the enhanced K‐hypoplastic models appear to provide the best performance overall. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
3.
In this paper a constitutive model for soils incorporating small strain stiffness formulated in the multilaminate framework is presented. In the multilaminate framework, the stress–strain behaviour of a material is obtained by integrating the mechanical response of an infinite number of randomly oriented planes passing through a material point. Such a procedure leads to a number of advantages in describing soil behaviour, the most significant being capture of initial and induced anisotropy due to plastic flow in a physically meaningful manner. In the past, many soil models of varying degree of refinement in the multilaminate framework have been presented by various authors. However, the issue of high initial soil stiffness in the range of very small strains and its degradation with straining, commonly referred to as ‘small strain stiffness’, has not been addressed within the multilaminate framework. In this paper, we adopt a micromechanics‐based approach to derive small strain elastic stiffness of the soil mass. Comparison of laboratory test data with results obtained from numerical simulations based on the proposed constitutive model incorporating small strain stiffness is performed to demonstrate its predictive capabilities. The model is implemented in a finite element code and numerical simulations of a deep excavation are presented with and without incorporation of small strain stiffness to demonstrate its importance in predicting profiles of deformation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
5.
R. Holtzman 《国际地质力学数值与分析法杂志》2012,36(7):944-958
Experiments indicate that the bulk stiffness of weakly‐cemented granular materials increases significantly with the applied load, a nonlinearity which is not captured by most micromechanical models. Here, we study the deformation of weakly‐cemented materials through grain‐scale simulations. We show that the frequently‐made assumption of linear‐elastic cement and intergranular contact area which varies according to a Hertzian‐type model cannot explain the observed nonlinearity of the bulk response. We introduce the micromechanical effect of mechanisms such as closure and opening of microcracks, granular cement and material heterogeneity through an effective contact stiffness which depends on the local deformation. We find that an exponential dependence between the effective stiffness and the local deformation, with a high exponent value, provides bulk stiffness which is in good agreement with experimental data. The inability of models with weaker intergranular stiffness‐deformation dependence to reproduce the experimental data demonstrates the highly‐nonlinear nature of the intergranular deformation. Our results highlight the importance of accounting for grain‐scale mechanisms in modeling granular materials, and provide a plausible explanation for the nonlinear behavior of weakly‐cemented sediments. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
6.
A sample of soil is subjected to multidimensional cyclic loading when two or three principal components of the stress or strain tensor are simultaneously controlled to perform a repetitive path. These paths are very useful to evaluate the performance of models simulating cyclic loading. In this article, an extension of an existing constitutive model is proposed to capture the behavior of the soil under this type of loading. The reference model is based on the intergranular strain anisotropy concept and therefore incorporates an elastic locus in terms of a strain amplitude. In order to evaluate the model performance, a modified triaxial apparatus able to perform multidimensional cyclic loading has been used to conduct some experiments with a fine sand. Simulations of the extended model with multidimensional loading paths are carefully analyzed. Considering that many cycles are simulated (\(N>30\)), some additional simulations have been performed to quantify and analyze the artificial accumulation generated by the (hypo-)elastic component of the model. At the end, a simple boundary value problem with a cyclic loading as boundary condition is simulated to analyze the model response. 相似文献
7.
亚塑性模型为模拟颗粒材料的非线性力学行为提供了一条新途径,特别是CLoE亚塑性模型在模拟应变局部化时具有一定的优势。然而该模型在模拟小幅应力-应变循环时表现出一定的锯齿效应。为了克服该效应,基于颗粒间应变张量的概念发展了修正的CLoE亚塑性模型以正确模拟循环荷载下密砂的力学行为。此外,为保证单调荷载作用下修正模型与原模型预测结果的一致性,改进了颗粒间应变率及颗粒间最大应变的定义。数值算例表明:（1）修正模型保留了克服锯齿效应的优点。（2）修正模型能够反映不同振幅条件下的卸载刚度。（3）在大振幅循环条件下,滞回圈的面积随着循环次数增加而增大。（4）修正模型能够保证单调加载条件下所得结果与原模型的一致性。（5）修正模型可以反映材料的疲劳破坏机制。 相似文献
8.
The paper begins with a discussion of the phenomenon of small‐strain stiffness and presents the small‐strain overlay model, a simple model that takes into account the non‐linear stiffness of soils at small strains. The new model can enhance already established elastoplastic formulations for non‐linear stiffness variation at small strains in a similar way that intergranular strain enhances the hypoplastic model. The overlay model is driven by the material's strain history and only two additional material constants, both with clear physical meaning. Therefore, the proposed model is a step towards the incorporation of small‐strain stiffness into routine design. In this paper, the new small‐strain overlay model is formulated. Its ability to take into account the influence of various strain histories on soil stiffness is illustrated in several examples. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
9.
ISA model: A constitutive model for soils with yield surface in the intergranular strain space 
下载免费PDF全文
下载免费PDF全文 In this article, a new constitutive model for soils is proposed. It is formulated by means of plasticity, but in contrast to the precedent works, it presents a yield function describing a surface within the intergranular strain space. This latter is a state variable providing information of the recent strain history. An expression for the plastic strain rate has been proposed to guarantee the stress rate continuity. Under the application of medium or large strain amplitudes, the constitutive equation becomes independent of the intergranular strain and delivers a mathematical structure similar to some Karlsruhe hypoplastic models. Some simulations of monotonic and cyclic triaxial test are provided to evaluate and analyze the model performance. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
The paper presents a hypoplastic constitutive model for the three-dimensional non-linear stress–strain and dilatant volume change behaviour of sand. The model is developed without recourse to the concept in elastoplasticity theory such as yield surface, plastic potential and decomposition into elastic and plastic parts. Benefited from the non-linear tensorial functions available from the representation theorem the model possesses simple mathematical formulation and contains only four material parameters, which can be easily identified with triaxial compression tests. Comparison of the predictions with the experimental results shows that the model is capable of capturing the salient behaviour of sand under monotonic loading and is applicable to both drained and undrained conditions. 相似文献
11.
This study presents a finite element (FE) micromechanical modelling approach for the simulation of linear and damage‐coupled viscoelastic behaviour of asphalt mixture. Asphalt mixture is a composite material of graded aggregates bound with mastic (asphalt and fine aggregates). The microstructural model of asphalt mixture incorporates an equivalent lattice network structure whereby intergranular load transfer is simulated through an effective asphalt mastic zone. The finite element model integrates the ABAQUS user material subroutine with continuum elements for the effective asphalt mastic and rigid body elements for each aggregate. A unified approach is proposed using Schapery non‐linear viscoelastic model for the rate‐independent and rate‐dependent damage behaviour. A finite element incremental algorithm with a recursive relationship for three‐dimensional (3D) linear and damage‐coupled viscoelastic behaviour is developed. This algorithm is used in a 3D user‐defined material model for the asphalt mastic to predict global linear and damage‐coupled viscoelastic behaviour of asphalt mixture. For linear viscoelastic study, the creep stiffnesses of mastic and asphalt mixture at different temperatures are measured in laboratory. A regression‐fitting method is employed to calibrate generalized Maxwell models with Prony series and generate master stiffness curves for mastic and asphalt mixture. A computational model is developed with image analysis of sectioned surface of a test specimen. The viscoelastic prediction of mixture creep stiffness with the calibrated mastic material parameters is compared with mixture master stiffness curve over a reduced time period. In regard to damage‐coupled viscoelastic behaviour, cyclic loading responses of linear and rate‐independent damage‐coupled viscoelastic materials are compared. Effects of particular microstructure parameters on the rate‐independent damage‐coupled viscoelastic behaviour are also investigated with finite element simulations of asphalt numerical samples. Further study describes loading rate effects on the asphalt viscoelastic properties and rate‐dependent damage behaviour. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
12.
In this paper an extension of existing multilaminate soil models is presented, which can account for inherent and stress‐induced cross‐anisotropic elasticity in the small strain range and its dependency on the load history. In the multilaminate framework, material behaviour is formulated on a number of local planes in each stress point, and the macroscopic response of the material is obtained by integration of the local contributions. Strain‐induced anisotropy, which adds to the stiffness anisotropy inherently present in the material, is therefore intrinsically taken into account. Micro–macro relations between local parameters on plane level and global parameters on macroscopic level are obtained by the spectral decomposition of the global elastic compliance matrix. The model is implemented into a finite‐element code, and model predictions are compared with experimental data of triaxial tests on different soils involving small and large load cycles. The importance of cross‐anisotropic elasticity within the small strain range for predicting ground deformations in geotechnical boundary value problems is discussed at the example of an excavation problem. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
14.
The theory of hypoplasticity was developed initially for non-cohesive soils. However, sand and clay have many common properties;
therefore arose the idea to extend the hypoplastic model to clay. The proposed model is able to describe the behaviour of
cohesive soils with the incorporation of an appropriate structure tensor into the constitutive equation. This tensor is a
stress-like internal parameter, also called back stress. This enables us to describe the behaviour of cohesive soils with
the same material parameters for several states of consolidation and also to model barotropy and pycnotropy of sand. Numerical
simulations of element tests are performed in order to check the performance of this hypoplastic model. Experimental data
obtained with normally and overconsolidated clay and sand specimens with various densities are taken for comparison, and it
is shown that the model is capable of describing the material behaviour of clay and sand. The determination of the material
constants, the calibration method, is also presented in this paper. 相似文献
15.
A large strain analysis of undrained expansion of a spherical/cylindrical cavity in a soil modelled as non‐linear elastic modified Cam clay material is presented. The stress–strain response of the soil is assumed to obey non‐linear elasticity until yielding. A power‐law characteristic or a hyperbolic stress–strain curve is used to describe the gradual reduction of soil stiffness with shear strain. It is assumed that, after yielding, the elasto‐plastic behaviour of the soil can be described by the modified Cam clay model. Based on a closed‐form stress–strain response in undrained condition, a numerical solution is obtained with the aid of simple numerical integration technique. The results show that the stresses and the pore pressure in the soil around an expanded cavity are significantly affected by the non‐linear elasticity, especially if the soil is overconsolidated. The difference between large strain and small strain solutions in the elastic zone is not significant. The stresses and the pore pressure at the cavity wall can be expressed as an approximate closed‐form solution. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
16.
In this paper, the novel concept of probabilistic yielding is used for 1‐D cyclic simulation of the constitutive behavior of geomaterials. Fokker–Planck–Kolmogorov equation‐based probabilistic elastic–plastic constitutive framework is applied for obtaining the complete probabilistic (probability density function) material response. Both perfectly plastic and hardening‐type material models are considered. It is shown that when uncertainties in material parameters are taken into consideration, even the simple, elastic‐perfectly plastic model captures some of the important features of geomaterial behavior, for example, modulus reduction with cyclic strain, which, deterministically, is only possible with more advanced constitutive models. Furthermore, it is also shown that the use of isotropic and kinematic hardening rules does not significantly improve the probabilistic material response. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
17.
Soils can be best compacted by repeated shearing. The strain amplitude plays an important role for the maximum compaction that can be reached. Experimental evidence emphasizes a vital impact of simultaneous multidirectional shear loading on the rate and magnitude of soil compaction. Two different vibrocompaction methods were analysed by the numerical simulations in the light of these findings. In an elastic finite element (FE) analysis, strain paths were determined. A strain amplitude‐dependent stiffness at small strains was introduced by multiple runs of the FE calculation to reach an appropriate stiffness for particular distances from the vibrator. Subsequently, the obtained strain paths were used to control single element simulations using hypoplasticity with intergranular strains. The calculated compaction profiles show three zones known from practical evidence: a limited compaction close to the vibrator, a zone of maximum compaction and a non‐densified zone remote from the vibrator. The deep vibrator produces a faster compaction than the top vibrator, especially in the more distant zone. The more efficient work of the deep vibrator can be attributed to a more general multidirectional shearing. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
18.
Modelling of interfaces in geotechnical engineering is an important issue. Interfaces between structural elements (e.g., anchors, piles, tunnel linings) and soils are widely used in geotechnical engineering. The objective of this article is to propose an enhanced hypoplastic interface model that incorporates the in-plane stresses at the interface. To this aim, we develop a general approach to convert the existing hypoplastic model with a predefined limit state surface for sands into an interface model. This is achieved by adopting reduced stress and stretching vectors and redefining tensorial operations which can be used in the existing continuum model with few modifications. The enhanced interface model and the previous model are compared under constant-load, stiffness and volume conditions. The comparison is followed by a verification of two the approaches for modelling the different surface roughness. Subsequently, a validation between available experimental data from the literature versus simulations is presented. The new enhanced model gives improved predictions by the incorporation of in-plane stresses into the model formulation. 相似文献
19.
Many clay rocks have distinct bedding planes. Experimental studies have shown that their mechanical properties evolve with the degree of saturation (DOS), often with higher stiffness and strength after drying. For transversely isotropic rocks, the effects of saturation can differ between the bed-normal (BN) and bed-parallel (BP) directions, which gives rise to saturation-dependent stiffness and strength anisotropy. Accurate prediction of the mechanical behavior of clay rocks under partially saturated conditions requires numerical models that can capture the evolving elastic and plastic anisotropy with DOS. In this study, we present an anisotropy framework for coupled solid deformation-fluid flow in unsaturated elastoplastic media. We incorporate saturation-dependent strength anisotropy into an anisotropic modified Cam-Clay (MCC) model and consider the evolving anisotropy in both the elastic and plastic responses. The model was calibrated using experimental data from triaxial tests to demonstrate its capability in capturing strength anisotropy at various levels of saturation. Through numerical simulations, we demonstrate the role of evolving stiffness and strength anisotropy in the mechanical behavior of clay rocks. Plane strain simulations of triaxial compression tests were also conducted to demonstrate the impacts of material anisotropy and DOS on the mechanical and fluid flow responses. 相似文献
20.
无黏性土的应力-应变关系可以用Gudehus-Bauer亚塑性本构模型来模拟,该模型强调应力增量的大小和方向不仅与当前应力状态有关,而且还取决于当前应变增量的大小和方向。为分析其与传统弹塑性理论的不同之处,对Gudehus-Bauer理论的线性项和非线性项进行了研究,并对不同初始孔隙比下Gudehus-Bauer亚塑性模型的应力-应变关系进行了探讨。结果表明Gudehus-Bauer亚塑性模型不用把应变分为弹性和塑性部分就能考虑不可逆变形,并能体现密砂的剪胀特性和应变软化特性以及松砂的剪缩特性和应变硬化特性。 相似文献