共查询到20条相似文献，搜索用时 31 毫秒
1.
冲绳海槽中部表层沉积物中的放射虫 总被引：7，自引：2，他引：5
1992年7月“向阳红16号”海洋调查船利用大洋50型抓斗在冲绳海槽中部（25°30’－30°N,125°－129°E）区域内获取表层沉积物样品88个。表层沉积物中的放射虫定量分析结果表明;愈近海槽放射虫的数量及属、种丰度值愈高,西侧槽坡离开槽区越远,放射虫数量及属种越渐少。而东侧槽被放射虫数量则表现了高、低值成点状分布的格局。表层沉积物中两大类放射虫的百分含量分别为泡沫虫约占87％,罩笼虫约占13％。另外根据分析结果,把本区分为3个小的沉积区：陆坡上部沉积区;陆被下部沉积区;海槽底部沉积区。 相似文献
2.
Abstract The morphological features associated with Co-rich manganese deposits, the size variations of nodules, and the occurrence of different substrates have been analyzed, to evaluate the influence of various seabed slope angles on the distribution of these features. The coverage and size of the crusts depend on their surface morphology and seabed topography, resulting in cobble-type, lineated, or step-like outcrops. Small nodules (1–4 cm in diameter) dominate all seabed slopes, with a few locations having nodules ranging from 1 to 8 or 1 to 10 cm. Sediments invariably occur as substrates for nodules and as cover for crusts, their coverage being inversely proportional to that of the nodules and crust outcrops. Steeper seafloor areas have large crust outcrops exposed with no or few nodules and sediments associated with them. The intermediate slopes have a combination of nodules, sediments, and crusts in various proportions, depending on topography and gradient. Large-scale nodule occurrences, followed by sediment fields and crust outcrops on seabed slopes of < 3°, 3–7°, and > 15°, respectively, represent typical morphological distribution zones of the Co-rich manganese deposits on a seamount in the central Pacific Ocean. A transition zone between nodule-dominated fields and large crust outcrops occurs for slopes from 7° to 15°. This detailed study on distribution of Co-rich deposits gives a better understanding for purposes of their exploitation. 相似文献
3.
Abstract The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α=6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?cu =15°‐17°, and the cu/po values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α = 6°, cu /po =0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, St =2–4. The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (c u /p o=0.30–0.50) is attributed to large horizontal accelerations(k=12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (cu /po = 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted. 相似文献
4.
Abstract The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α = 6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐ drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?cu =15°‐17°, and the cu/p o values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α=6°, cu/p o=0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, St =2–4. The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (cu/p o=0.30–0.50) is attributed to large horizontal accelerations (k= 12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (cu/p o= 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted. 相似文献
5.
Distribution characteristics of cobalt‐rich manganese deposits were evaluated from stereo photographs and video data on a seamount in the central Pacific Ocean by image analysis, photogrammetric technique, and visual observations. The results show that many locations have high crust coverages with highly undulating micro‐topography. High nodule coverages occur on relatively flat seafloor, and the nodule size distribution varies from uniform to inhomogeneous among different locations. Distribution of these deposits along detailed topographic sections show that the seafloor can be divided into nodule dominant zones between 0° and 3° slopes, with sediment patches up to 4° slopes; and crust dominant zones, which occur on slopes higher than 15°. The transition zone, between 4° and 15° slopes, has many locations, where nodules and crusts co‐occur in varying percentages. The observation of crust outcrops among sediments and nodules, as well as in the gravity core samples, indicates the presence of shallow buried crusts as well, which can substantially enhance resource evaluation of the deposits. 相似文献
6.
George Ferentinos 《Marine Georesources & Geotechnology》2013,31(4):261-277
Abstract The Hellenic Arc is located within one of world's most seismically active areas and has experienced extreme tectonism through Tertiary and Quaternary times. This activity controls the rates of uplift and subsidence and determines the sediments supply and depot centers. This paper discusses the various geological hazards detected in selected parts of the Hellenic Arc and examines the causative factors. The areas surveyed were the North Aegean Trough, the Kythera Ridge in the outer island arc, the Corfu/Kefalinia/Zante shelf/slope, and the Thermaicos, Corinth, Patras, Amvrakia, and Malliacos gulfs, as well as the Trichonis Lake. The potential geological hazards observed are (1) active faulting, (2) sediment instabilities, (3) gas‐charged sediments, (4) salt doming, (5) erosion, transport, and deposition of sediments, and (6) seismicity, volcanism, and tsunamis. The major types of sediment instabilities that have been documented on seabed include (1) surficial sediment creep in slopes ranging from 1 to 2° resulting infolding and faulting of the surficial sediments, (2) translational and rotational slides in slopes ranging from 2 to 40°, (3) debris flow, and (4) turbidity currents. Factors that contribute to slope instability in the Hellenic Arc are (1) sloping bottom, (2) thick accumulations of Plio‐Quatemary sediments, (3) present day high rates of sedimentation, (4) closely spaced active faults, (5) earthquakes, and (6) active diapirism. The contribution of long period waves to slope failure in these areas appears to be of minor importance, since the slope failures occur in depths of more than 150 m. Gas‐charged sediments and pockmarks have been observed in areas associated with deltaic, fjord‐like, and open sea environments. This gas is presumably formed by the decomposition of biogenic material. Numerous disasters that took place during historical times and greatly affected the coastal zone were caused by the above‐mentioned hazards. Damage to offshore installations are limited to cable failure. 相似文献
7.
Abstract Subbottom profiling (3.5 kHz) in the uppermost slope of the outer shelf of the northwestern Aegean Sea has shown downslope slumping and intense sediment deformation as well as a succession of microslumping within the Late Pleistocene delta sequences. Postdeposition bottom erosion by currents and the overconsolidated sediments (Cu/Po > 1) indicate the termination of deformations a long time ago. Deformation processes are estimated to have been active 18,000–10,000 B.P. Large‐scale active downslope deformations with clockwise sediment block rotation have affected the area as well. These longer‐period deformations are associated with regional neotectonics and older unconformities (i. e., Plio‐Pleistocene) as potential slide planes. Geotechnical properties reflect mainly textural variations and locally (within sapropelic layers) high organic matter content. Relatively high values of shear strength were measured (5–29 kPa) with intermediate sensitivities (2–5), whereas relatively low values of water content (33–81%) were found along the five selective sediment cores. Infinity slope stability analysis revealed that the slopes in the study area are most stable, although theoretical evaluations (Cu estimated from linear regression analysis) indicate relative instability for the potential glide plane at 20 m depth. The outer shelf is covered by compact relict sands, and their gentle and low‐angle (<0.2°) slopes are the most stable region of the investigated area. 相似文献
8.
A series of experiments on drained creep of marine sediment indicates that strength degradation results from the creep process, which implies an associated reduction in slope stability. Furthermore, the highest creep potential of a sediment may be at its preconsolidation stress. Results from the experiments on samples from Georges Bank continental slope were also used in conjunction with a preliminary theoretical model to predict creep displacements. For the case illustrated in this report, steep slopes (>20°) and thick sections (>30 m) give rise to substantial creep and probable creep rupture; as angles or thicknesses decrease, displacements rapidly become negligible.Creep may be a significant geologic process on many marine slopes. Not only can it cause major displacements of surface sediment, but it may also be the precursor to numerous slope failures. 相似文献
9.
Abstract Numerous large sediment slides and slumps have been discovered and surveyed on the continental margins of Northwest Africa, Southwest Africa, Brazil (Amazon Cone), the Mediterranean, the Gulf of Mexico, and North America over the past 10 years. The mass movements are of two primary types: (1) translational slides, and (2) rotational slumps. Translational slides are characterized by a slide scar and a downslope zone of debris flows, after traveling in some areas for several hundreds of kilometers on slopes of less than 0.5°. Rotational slumps are bounded by steep scarps, but they do not involve large‐scale translation of sediments, although seismic records indicate disturbance in the down‐dropped block. Many of the slides and slumps have occurred in water depths greater than 2000 m on initial slopes of less than 1.5°. The largest slide so far discovered is off Spanish Sahara; in this case, the slide scar is 18,000 km2 in area, at least 600 km3 in volume of translated sediments. No apparent consistent relationship has yet been observed between the presence of the slides and the sedimentary environment in which they occurred. The slides off Southwest Africa and Spanish Sahara occurred in pelagic sediments rich in planktonic organic matter. In contrast, the slides off North America, Senegal‐Mauritania, and Brazil (Amazon Cone) occurred in sediments containing a high percentage of terrigenous material from nearby landmasses. Large sediment slides have also occurred in pelagic sediments on isolated oceanic rises such as the Madeira Rise (East‐Central Atlantic) and the Ontong‐Java Plateau (Pacific), where sedimentation rates are less than 2 cm/1000 years. The failure mechanism of the slides initiated near the shelf edge can probably be explained by sediment overloading during low glacio‐eustatic sea level, which allowed rivers to debouch sediments directly onto the outer shelf or upper slope. Possible mechanisms of failure of the deepwater slides and slumps include earthquakes, undercutting of the slope by bottom currents, and changes in porewater pressures induced as a direct or indirect result of glacio‐eustatic changes in sea level. 相似文献
10.
针对内孤立波在行进过程中遇到海底斜坡会对海底产生力的作用,不同坡度斜坡对内孤立波的动力响应应该存在差异。本文通过水槽中制造内波,对不同角度的斜坡对内孤立波的动力响应过程进行了研究。结果表明,内孤立波通过陆架斜坡上方,会造成斜坡沉积物超孔隙水压力的积累;在相同振幅条件下,缓坡沉积物动力响应的幅度比陡坡沉积物大;随着振幅的增加,缓坡发生动力破坏程度大于陡坡;在斜坡沉积物稳定性受到破坏之前,超孔隙水压力的积累和释放同时存在,内孤立波振幅的增大会加剧超孔隙水压力的释放。该结果对于斜坡沉积物在内孤立波作用下失稳破坏的动力学研究和斜坡稳定性分析将起到指导作用。 相似文献
11.
The upper part of the continental slope in the northern South China Sea is prone to submarine landslide disasters,especially in submarine canyons. This work studies borehole sediments, discusses geotechnical properties of sediments, and evaluates sediment stability in the study area. The results show that sediment shear strength increases with increasing depth, with good linear correlation. Variations in shear strength of sediments with burial depth have a significantly greater rate of change in the canyon head and middle part than those in the canyon bottom. For sediments at the same burial depth, shear strength gradually increased and then decreased from the head to the bottom of the canyon, and has no obvious correlation with the slope angle of the sampling site. Under static conditions, the critical equilibrium slope angle of the sediments in the middle part of the canyon is 10° to 12°, and the critical slope angle in the head and the bottom of the canyon is 7°. The results indicate that potential landslide hazard areas are mainly distributed in distinct spots or narrow strips on the canyon walls where there are high slope angles. 相似文献
12.
Gideon Almagor 《Geo-Marine Letters》1986,6(1):29-34
Seismic profiles, radiographs, and geotechnical tests made on cores show that large sediment masses on the slope frequently
slump downslope. This slumping is earthquake-triggered. Off central and northern Israel (average maximum gradients 5 to 8°),
this slumping does not allow continuous sediment accumulation. Sediment accumulation and deposition of the debris over the
lower slope steadily keeps the slope in a smooth state. Only strong quakes affect the more stable, moderate slope (average
maximum gradients 3–4°) off southern Israel. These quakes affect the central and northern slope as do the weaker quakes, but
cause slumping of large sediment slabs that heavily scars the southern slope. 相似文献
13.
The foraminiferal (planktonic and benthic) and nannofosssil assemblages have been analyzed in the sediments of Core ACB-17-1447
taken from the South America continental slope north of the Rio Grande Rise piedmont during Cruise 17 of the R/V Akademik Sergey Vavilov. The core section is largely composed of carbonate and marly hemipelagic mud. The Quaternary age of the host sediments is
evident from the occurrence of the planktonic foraminiferal index species Globorotalia truncatulinoides. Based on the nannofossil assemblages, the core sediments are attributed to the upper Pleistocene-Holocene. They contain
abundant reworked Pliocene, Miocene, and Paleogene taxa transported from the slopes of the underwater Rio Grande Rise. The
paleotemperature analysis of the planktonic foraminifers provided data for constructing the temperature curve that demonstrates
two warm peaks. During the first warm period (Interval of 7–9 cm), the surface water temperature was as high as 26°C (Holocene
optimum), which exceeds by 3–4°C its presentday values and implies the more intense warm Brazil Current. The earlier warm
peak with temperatures up to 24°C recorded in the upper Pleistocene sediments (Interval of 69–71 cm) most likely reflects
the 3rd oxygenisotope stage (MIS 3), which corresponds to the interstadial phase of the last glaciation (30–40 ka ago). Based
on the abundances, taxonomic diversity, and proportions of the characteristic species of benthic foraminifers, the Core ASV-17-1447
section is divided into six intervals correlated with the marine isotopic stages defined by both the planktonic foraminifers
and climatic changes evident from the variations in the bottom water circulation along the southwestern slope of the Brazilian
Basin during the Late Quaternary. 相似文献
14.
The chemistry and mineralogy of the sediments of Lakes Rotoroa and Rotoiti, South Island, New Zealand (41° 51 S, 172° 38 E and 41° 50 S, 172° 50 E respectively) , were studied. In general, the cation exchange properties, element concentrations, and mineral compositions of the sediments show little variation between samples from each lake. However, some nutrient concentrations, notably exchangeable calcium, magnesium, and potassium, and total nitrogen and sulphur, are higher in sediments from weed beds than in sediments underlying deeper water; iron and manganese concentrations tend to show the opposite trend. Concentrations of exchangeable calcium and total nitrogen, sulphur, manganese, and iron generally decrease down the sediment profiles from the sediment/water interface. Differences between lakes, notably higher concentrations of illite and of the elements potassium, aluminium, titanium, and zirconium, and lower concentrations of calcium in the sediments of Lake Rotoiti than in those from Lake Rotoroa, are probably due mainly to the different geological settings rather than to differences in the diagenetic processes operating within the lakes. Mineralogical analyses indicate that the lake sediments are derived mainly from the valleys of the major inflow rivers rather than from the slopes at the sides of each lake. 相似文献
15.
G. Chronis V. Lykousis C. Anagnostou A. Karageorgis S. Stavrakakis S. Poulos 《Progress in Oceanography》2000,46(2-4)
The Cretan Basin can be characterized as a back-arc basin of the Hellenic Trench System, that is related to the subduction zone of the African Plate under the Eurasia Plate. The study area includes the narrow and relatively steep (gradient 1.5°) continental shelf of the island of Crete followed by the steep slope (2°–4°) and the rather flat deeper part of the Cretan basin (water depths >1700 m).Surficial sediments of the coastal zone are coarser and of terrigenous origin, while in deeper waters finer sediments, of biogenic origin, are more abundant. Sand-sized calcareous sediment accumulations, identified in middle-lower slope, may be attributed to the aggregation of seabed biogenic material related to the near bed current activity.High resolution profiles (3.5 kHz) taken from the inner shelf shows a typical sigmoid-oblique progradational configuration, implying prodelta sediment accumulation during the Holocene. In the upper-middle slope, sub-bottom reflectors indicate continuous sedimentation of alternating fine and/or coarse grained material. Small-scale gravity induced synsedimentary faults appeared, locally. In contrast, a series of gravity induced faults, identified in the lower slope, are associated with sediment instabilities due to seismotectonic activity. Sediment cores taken from the shelf-break consists of calcareous muddy sand with small amounts of terrigenous silt and fine sand, while the cores recovered from the middle slope has revealed a more homogeneous fine sediment texture of hemipelagic deposition.The prevailing accumulation processes in the southern margin of the Cretan basin are: (i) prodelta deposition in the inner-middle shelf; (ii) settling from bottom nepheloid layers in the shelf and upper slope; (iii) calcareous sediment formation due to settling from suspension and post accumulation aggregation (middle-lower slope); (iv) long-term episodic sediment gravity processes in the lower slope; and (v) to a lesser extent, redeposition from resuspension due to gravity processes and bottom currents. 相似文献
16.
Active slope failure,sediment collapse,and silt flows on the modern subaqueous Huanghe (Yellow River) delta 总被引：7，自引：0，他引：7
D. B. Prior Z. -S. Yang B. D. Bornhold G. H. Keller N. Z. Lu W. J. Wiseman Jr. L. D. Wright J. Zhang 《Geo-Marine Letters》1986,6(2):85-95
Post-depositional slope instability and bottom mass-movement processes strongly modify the progradational subaqueous slopes of the modern Huanghe (Yellow River) Delta. Wide, shallow gullies dissect the submarine slopes with gradients of 0.3 to 0.4°. Lower delta-front sediments experiencein situ subsidence, forming numerous collapse depressions. These processes are pronounced over much of the delta, incising and redistributing the most recently deposited silt-rich sediment. Principal causative factors include low sediment strengths created by rapid deposition in the delta during annual peak discharges from the river and severe bottom perturbations by surface storm-generated waves. 相似文献
17.
A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord. 相似文献
18.
Abstract Potential sediment mass movement was analyzed at ten locations on the continental slope off Peru and northern Chile, using samples obtained from up to 3 m below the seafloor. Shear strength parameters were obtained from consolidated‐undrained triaxial compression tests. Sediment behavior in these tests reflects the influence of organic matter, which is concentrated in the slope deposits by coastal upwelling. High water content of the organic‐rich sediments and the high de‐formability of organic matter contribute to the prevalent ductile behavior. Aggregation of clays by organic matter is apparently responsible for the high friction angles, up to 44°, displayed by the slope deposits. Sediment stability was assessed using infinite slope analyses. These analyses indicate that gravitational forces alone are not sufficient to cause sediment failure at any of the slope locations. Sediment accumulation on the slope is not rapid enough to generate excess pore pressure and reduce the resistance to gravitational sliding. Effects of earthquakes on slope stability were evaluated by modeling earthquake‐induced inertia forces as static forces and estimating pore pressures developed during cyclic loading. This analysis shows that sediments of the lower slope off Peru possess the highest susceptibility to failure during earthquakes. Earthquake accelerations on the order of 0.2 gravity are sufficient to trigger slumping at all ten slope locations. Indirect evidence suggests that creep and mass flows initiated at shallower water depths are factors that might contribute to sediment failure on the slope. 相似文献
19.
Hui Chen Xinong Xie David Van Rooij Thomas Vandorpe Li Huang Laiyuan Guo Ming Su 《Marine Geophysical Researches》2013,34(3-4):239-257
Based upon 2D seismic data, this study confirms the presence of a complex deep-water sedimentary system within the Pliocene-Quaternary strata on the northwestern lower slope of the Northwest Sub-Basin, South China Sea. It consists of submarine canyons, mass-wasting deposits, contourite channels and sheeted drifts. Alongslope aligned erosive features are observed on the eastern upper gentle slopes (<1.2° above 1,500 m), where a V-shaped downslope canyon presents an apparent ENE migration, indicating a related bottom current within the eastward South China Sea Intermediate Water Circulation. Contourite sheeted drifts are also generated on the eastern gentle slopes (~1.5° in average), below 2,100 m water depth though, referring to a wide unfocused bottom current, which might be related to the South China Sea Deep Water Circulation. Mass wasting deposits (predominantly slides and slumps) and submarine canyons developed on steeper slopes (>2°), where weaker alongslope currents are probably dominated by downslope depositional processes on these unstable slopes. The NNW–SSE oriented slope morphology changes from a three-stepped terraced outline (I–II–III) east of the investigated area, into a two-stepped terraced (I–II) outline in the middle, and into a unitary steep slope (II) in the west, which is consistent with the slope steepening towards the west. Such morphological changes may have possibly led to a westward simplification of composite deep-water sedimentary systems, from a depositional complex of contourite depositional systems, mass-wasting deposits and canyons, on the one hand, to only sliding and canyon deposits on the other hand. 相似文献
20.
Abstract Submarine faults and slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most faults that approach or reach the seafloor cut strata that may be equivalent in age to the upper Yakataga Formation (Pliocene‐Pleistocene). Along several faults, the seafloor is vertically offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these shows displacement at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an area of 1200 km2 with a slope of less than 0.5°, and (2) across the entire span of the Copper river prodelta, an area of 1730 km2, having a slope of about 0.5°. Seismic profiles across these areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay, and (4) Bering Trough. 相似文献