首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
An integrated dust storm modeling system is developed for the prediction of dust storms. The system couples a wind erosion scheme, a dust transportation model and the Penn State/UCAR modeling system (MM5) with a geographic information database. The system can be used for the prediction of dust emission rate and dust concentration associated with individual dust storm events. Two severe dust storm events occurred in spring 2002, one on the 19th–22nd of March and the other on the 6th–9th of April. The integrated modeling system is used to simulate the two events. The numerical results are compared with surface weather records and satellite images and good agreement is found between the model results and observation in dust concentration distribution and evolutions. The Gobi Desert in southern Mongolia and the Badain Jaran Desert, Tengger Desert and Hunshandake sandy land in Inner Mongolia (China) are identified to be the dust sources for the two events. The dominant modes of dust particles over western Inner Mongolia and Mongolia are from 2 to 11 μm in size, and 2 to 22 μm over Beijing and its surrounding area. The emission of particles in the 2–11 μm size range is found to be most important for Northeast Asian dust storms.  相似文献   

2.
Conspicuous excess brightness, exceeding that expected from coronal and zodiacal light (CZL), was observed above the lunar horizon in the Apollo 15 coronal photographic sequence acquired immediately after orbital sunset (surface sunrise). This excess brightness systematically faded as the Command Module moved farther into shadow, eventually becoming indistinguishable from the CZL background. These observations have previously been attributed to scattering by ultrafine dust grains (radius ∼0.1 microns) in the lunar exosphere, and used to obtain coarse estimates of dust concentration at several altitudes and an order-of-magnitude estimate of ∼10−9 g cm−2 for the column mass of dust near the terminator, collectively referred to as model “0”.We have reanalyzed the Apollo 15 orbital sunset sequence by incorporating the known sightline geometries in a Mie-scattering simulation code, and then inverting the measured intensities to retrieve exospheric dust concentration as a function of altitude and distance from the terminator. Results are presented in terms of monodisperse (single grain size) dust distributions. For a grain radius of 0.10 microns, our retrieved dust concentration near the terminator (∼0.010 cm−3) is in agreement with model “0” at z=10 km, as is the dust column mass (∼3–6×10−10 g cm−2), but the present results indicate generally larger dust scale heights, and much lower concentrations near 1 km (<0.08 cm−3 vs. a few times 0.1 cm−3 for model “0"). The concentration of dust at high altitudes (z>50 km) is virtually unconstrained by the measurements. The dust exosphere extends into shadow a distance somewhere between 100 and 200 km from the terminator, depending on the uncertain contribution of CZL to the total brightness. These refined estimates of the distribution and concentration of exospheric dust above the lunar sunrise terminator should place new and more rigorous constraints on exospheric dust transport models, as well as provide valuable support for upcoming missions such as the Lunar Atmosphere and Dust Environment Explorer (LADEE).  相似文献   

3.
We have derived the real and imaginary indices of refraction for 10 phyllosilicate minerals—montmorillonite, beidellite, nontronite, hectorite, saponite, illite, illite–smectite (60/40 interlayered) kaolinite, halloysite, and serpentine—from 100–2000 cm−1 (5–100 μm) at 2 cm−1 spectral sampling using classical Lorentz–Lorenz dispersion theory. We present the real and imaginary indices and the oscillator parameters with which they were modeled. Use of these optical constants will aid in the modeling of thermal infrared spectra of planets, asteroids, interplanetary and interstellar dust, and protoplanetary disks around nearby stars.  相似文献   

4.
In this paper we report about a small region on the northern scarp of Olympus Mons showing an increase of the 3 μm hydration band in the OMEGA spectra, together with low superficial temperatures. Although water ice clouds can occurs on the flank of big martian volcanoes, radiative transfer modeling indicates that atmospheric water ice alone cannot justify the shape of the observed band. A fit of the 1.9–3 μm absorption features is obtained by hypothesizing that the study region consists of a mixture of dust and water ice covered by an optically thin (τ=0.08 at 3 μm) layer of dust. Thermal modeling also suggests that water ice in this region may be stable during most of the martian year due to the saturation of the atmosphere. If water ice is responsible for the observed spectral behavior, it might consist of a number of ice or snow patches possibly deposited in small depressions.  相似文献   

5.
The Aeolian Dust Experiment on Climate Impact (ADEC) was initiated in April 2000 as a joint five-year Japan–China project. The goal was to understand the impact of aeolian dust on climate via radiative forcing (RF). Field experiments and numerical simulations were conducted from the source regions in northwestern China to the downwind region in Japan in order to understand wind erosion processes temporal and spatial distribution of dust during their long-range transportation chemical, physical, and optical properties of dust and the direct effect of radiative forcing due to dust. For this, three intensive observation periods (IOP) were conducted from April 2002 to April 2004.The in situ and network observation results are summarized as follows: (1) In situ observations of the wind erosion process revealed that the vertical profile of moving sand has a clear size dependency with height and saltation flux and that threshold wind velocity is dependent on soil moisture. Results also demonstrated that saltation flux is strongly dependent on the parent soil size distribution of the desert surface. (2) Both lidar observations and model simulations revealed a multiple dust layer in East Asia. A numerical simulation of a chemical transport model, CFORS, illustrated the elevated dust layer from the Taklimakan Desert and the lower dust layer from the Gobi Desert. The global-scale dust model, MASINGAR, also simulated the dust layer in the middle to upper free troposphere in East Asia, which originated from North Africa and the Middle East during a dust storm in March 2003. Raman lidar observations at Tsukuba, Japan, found the ice cloud associated with the dust layer at an altitude of 6 to 9 km. Analysis from lidar and the radio-sonde observation suggested that the Asian dust acted as ice nuclei at the ice-saturated region. These results suggest the importance of dust's climate impact via the indirect effect of radiative forcing due to the activation of dust into ice nuclei. (3) Studies on the aerosol concentration indicated that size distributions of aerosols in downwind regions have bimodal peaks. One peak was in the submicron range and the other in the supermicron range. The main soluble components of the supermicron peak were Na+, Ca2+, NO3−, and Cl−. In the downwind region in Japan, the dust, sea salt, and a mixture of the two were found to be dominant in coarse particles in the mixed boundary layer. (4) Observation of the optical properties of dust by sky-radiometer, particle shoot absorption photometer (PSAP), and Nephelometer indicated that unpolluted dust at source region has a weaker absorption than originally believed.A sensitivity experiment of direct RF by dust indicated that single scattering albedo is the most important of the optical properties of dust and that the sensitivity of instantaneous RF in the shortwave region at the top of the atmosphere to the refractive index strongly depends on surface albedo. A global scale dust model, MASINGAR, was used for evaluation of direct RF due to dust. The results indicated the global mean RF at the top and the bottom of the atmosphere were − 0.46 and − 2.13 W m− 2 with cloud and were almost half of the RF with cloud-free condition.  相似文献   

6.
We present observations of a local dust storm performed by the OMEGA and PFS instruments aboard Mars Express. OMEGA observations are used to retrieve the dust single-scattering albedo in the spectral range 0.4-4.0 μm. The single-scattering albedo shows fairly constant values between 0.6 and 2.6 μm, and a sharp decrease at wavelengths shorter than 0.6 μm, in agreement with previous studies. It presents a small absorption feature due to ferric oxide at 0.9 μm, and a strong absorption feature due to hydrated minerals between 2.7 and 3.6 μm. We use a statistical method, the Independent Component Analysis, to determine that the dust spectral signature is decoupled from the surface albedo, proving that the retrieval of the single-scattering albedo is reliable, and we map the dust optical thickness with a conventional radiative transfer model. The effect of the dust storm on the atmospheric thermal structure is measured using PFS observations. We also simulate the thermal impact of the dust storm using a one-dimensional atmospheric model. A comparison of the retrieved and modeled temperature structures suggests that the dust in the storm should be confined to the 1-2 lowest scale heights of the atmosphere. However, the observed OMEGA reflectance in the CO2 absorption bands does not support this suggestion.  相似文献   

7.
Xianglei Huang 《Icarus》2003,165(2):301-314
We introduce two new techniques in analyzing martian spectrally resolved radiance data obtained by the Thermal Emission Spectrometer (TES): spectral empirical orthogonal function (EOF) analysis and the tri-spectral algorithm. Spectral EOF analysis allows us to obtain the variability of spectra and associated temporal and spatial patterns. The case study with TES 20° S-20° N data shows that the first principal component (PC1) dominates the total variance and is associated with surface or near-surface brightness temperature variations. The PC2 is associated with atmospheric variability, and a negative correlation between dust and ice absorptions can be clearly seen over many regions. The annual cycle is a major component of the PC1 temporal patterns. The fingerprint of the dust storm can be clearly seen in the PC2 temporal patterns in most areas except the highlands. Spectral EOF can be used for validation of the variability of martian GCMs. The tri-spectral algorithm is based on the differences between three bands (dust, ice and a weak CO2 absorption band) to distinguish spectra sampled in different situations: water ice cloud, dust, and surface anisothermality. We use a line-by-line radiative transfer model coupled with multiple scattering to investigate the sensitivity of this algorithm to dust and ice optical depth as well as surface emissivity. The comparisons between results of this algorithm and the TES team's retrieved dust and ice opacity are consistent over all studied periods except during the peak of the dust storm. Our algorithm is complementary to the more sophisticated TES retrieval and can be used to screen large amounts of data to get an overview.  相似文献   

8.
Photometry and thermal lightcurves of six large asteroids (1-Ceres, 2-Pallas, 3-Juno, 12-Victoria, 85-Io and 511-Davida) have been observed at 870 μm (345 GHz) using the MPIfR 19-Channel Bolometer of the Heinrich-Hertz Submillimeter Telescope. Only Ceres displayed a lightcurve with an amplitude (∼50%, peak to peak) that was significantly greater than the uncertainty in the observations. When thermal fluxes and brightness temperatures are corrected for heliocentric distance and albedo, there is a significant relation with the sub-solar latitude of the asteroid, or the local season of the asteroid. No such trend can be found between observations with solar phase angle. These results are evidence that most of the submillimeter thermal radiation is emitted from below the diurnal thermal wave. Comparing the observed trend with model output suggests that the submillimeter radiation from all the asteroids we observed is best modeled by surface material with low thermal inertia (<15 J m−2 s−0.5 K−1, consistent with mid-infrared observations of large main-belt asteroids) and a refractive index closer to unity relative to densities inferred from radar experiments, implying a veneer of material over the asteroid surface with a density less than 1000 kg m−3. More data with better signal-to-noise and aspect coverage could improve these models and constrain physical properties of asteroid surface materials. This would also allow asteroids to be used as calibration sources with accurately known and stable, broadband fluxes at long wavelengths.  相似文献   

9.
We utilized aerosol extinction coefficient inferred from Cassini/CIRS spectra in the far and mid infrared region to derive the extinction cross-section near an altitude of 190 km at 15°S (from far-IR) and 20°S (from mid-IR). By comparing the extinction cross section that are derived from observations with theoretical calculations for a fractal aggregate of 3000 monomers, each having a radius of 0.05 μm, and a fractal dimension of 2, we are able to constrain the refractive index of Titan’s aerosol between 70 and 1500 cm?1 (143 and 6.7 μm). As the real and imaginary parts of the refractive index are related by the Kramers–Kronig equation, we apply an iterative process to determine the optical constants in the thermal infrared. The resulting spectral dependence of the imaginary index displays several spectral signatures, some of which are also seen for some Titan’s aerosol analogues (tholins) produced in laboratory experiments. We find that Titan’s aerosols are less absorbent than tholins in the thermal infrared. The most prominent emission bands observed in the mid-infrared are due to CH bending vibrations in methyl and methylene groups. It appears that Titan’s aerosols predominantly display vibrations implying carbon and hydrogen atoms and perhaps marginally nitrogen. In the mid infrared, all the aerosol spectral signatures are observed at three additional latitudes (56°S, 5°N and 30°N) and in the 193–274 km altitude range, which implies that Titan’s aerosols exhibit the same chemical composition in all investigated latitude and altitude regions.  相似文献   

10.
P. Lavvas  R.V. Yelle  C.A. Griffith 《Icarus》2010,210(2):832-842
  相似文献   

11.
The position and shape of the Gegenschein’s maximum brightness provide information on the structure of the interplanetary dust cloud. We show that the asteroidal dust bands, extended near the anti-solar point, play an important role in determining both the position of the maximum brightness and the shape of the Gegenschein. After removing the asteroidal dust bands from an observation of the Gegenschein on November 2, 1997, it was found that the maximum brightness point shifted −0.4° in ecliptic latitude, i.e., to the south of the ecliptic plane, at an ecliptic longitude of 180°, in contrast to a latitude value of +0.1° when the dust bands were included. Furthermore, the part of the Gegenschein to the south of the ecliptic plane was brighter than the northern part at the time of observation. Referring to the cloud model of T. Kelsall et al. (1998, Astrophy. J. 508, 44-73), it can be estimated that the ascending node of the symmetry plane of the dust cloud is 57°−3°+7° when its inclination is 2.03° ? 0.50°.  相似文献   

12.
The influence of the assumed shape of aerosols on the estimates of the refractive index and size of particles (based on the data of ground-based spectropolarimetric measurements) is investigated for Jupiters cloud layer. In the present analysis, we supposed the atmospheric particles to be chaotically oriented spheroids and cylinders with a gamma size distribution. Their single-scattering characteristics were calculated with the T-matrix method, and the intensity and degree of linear polarization of the radiation reflected by the center of the planetary disk were found by solving the vector radiative-transfer equation with consideration for multiple scattering in a plane-parallel atmosphere. We considered a spectral interval from 0.423 to 0.798 µm and phase angles from 0° to 11°. It has been shown that, if we use the optical characteristics of aerosols found within the frames of a spherical model (Mishchenko, 1990a), the models with the nonspherical particles considered here cannot fit the observational data. The refractive index and the sizes of spheroidal and cylindrical particles were estimated from a comparison of the data of measurements and calculations, and the simplest models for the Jovian cloud layer structure have been considered. We have concluded that the optical parameters of cloud particles (specifically, the refractive index) cannot be reliably estimated only on the basis of measurements made in a narrow range of phase angles.__________Translated from Astronomicheskii Vestnik, Vol. 39, No. 2, 2005, pp. 117–127.Original Russian Text Copyright © 2005 by Dlugach, Mishchenko.  相似文献   

13.
Disruptive collisions in the main belt can liberate fragments from parent bodies ranging in size from several micrometers to tens of kilometers in diameter. These debris bodies group at initially similar orbital locations. Most asteroid-sized fragments remain at these locations and are presently observed as asteroid families. Small debris particles are quickly removed by Poynting-Robertson drag or comminution but their populations are replenished in the source locations by collisional cascade. Observations from the Infrared Astronomical Satellite (IRAS) showed that particles from particular families have thermal radiation signatures that appear as band pairs of infrared emission at roughly constant latitudes both above and below the Solar System plane. Here we apply a new physical model capable of linking the IRAS dust bands to families with characteristic inclinations. We use our results to constrain the physical properties of IRAS dust bands and their source families. Our results indicate that two prominent IRAS bands at inclinations ≈2.1° and ≈9.3° are byproducts of recent asteroid disruption events. The former is associated with a disruption of a ≈30-km asteroid occurring 5.8 Myr ago; this event gave birth to the Karin family. The latter came from the breakup of a large >100-km-diameter asteroid 8.3 Myr ago that produced the Veritas family. Using an N-body code, we tracked the dynamical evolution of ≈106 particles, 1 μm to 1 cm in diameter, from both families. We then used these results in a Monte Carlo code to determine how small particles from each population undergo collisional evolution. By computing the thermal emission of particles, we were able to compare our results with IRAS observations. Our best-fit model results suggest the Karin and Veritas family particles contribute by 5-9% in 10-60-μm wavelengths to the zodiacal cloud's brightness within 50° latitudes around the ecliptic, and by 9-15% within 10° latitudes. The high brightness of the zodiacal cloud at large latitudes suggests that it is mainly produced by particles with higher inclinations than what would be expected for asteroidal particles produced by sources in the main belt. From these results, we infer that asteroidal dust represents a smaller fraction of the zodiacal cloud than previously thought. We estimate that the total mass accreted by the Earth in Karin and Veritas particles with diameters 20-400 μm is ≈15,000-20,000 tons per year (assuming 2 g cm−3 particles density). This is ≈30-50% of the terrestrial accretion rate of cosmic material measured by the Long Duration Exposure Facility. We hypothesize that up to ≈50% of our collected interplanetary dust particles and micrometeorites may be made up of particle species from the Veritas and Karin families. The Karin family IDPs should be about as abundant as Veritas family IDPs though this ratio may change if the contribution of third, near-ecliptic source is significant. Other sources of dust and/or large impact speeds must be invoked to explain the remaining ≈50-70%. The disproportional contribution of Karin/Veritas particles to the zodiacal cloud (only 5-9%) and to the terrestrial accretion rate (30-50%) suggests that the effects of gravitational focusing by the Earth enhance the accretion rate of Karin/Veritas particles relative to those in the background zodiacal cloud. From this result and from the latitudinal brightness of the zodiacal cloud, we infer that the zodiacal cloud emission may be dominated by high-speed cometary particles, while the terrestrial impactor flux contains a major contribution from asteroidal sources. Collisions and Poynting-Robertson drift produce the size-frequency distribution (SFD) of Karin and Veritas particles that becomes increasingly steeper closer to the Sun. At 1 AU, the SFD is relatively shallow for small particle diameters D (differential slope exponent of particles with D?100 μm is ≈2.2-2.5) and steep for D?100 μm. Most of the mass at 1 AU, as well as most of the cross-sectional area, is contributed by particles with D≈100-200 μm. Similar result has been found previously for the SFD of the zodiacal cloud particles at 1 AU. The fact that the SFD of Karin/Veritas particles is similar to that of the zodiacal cloud suggests that similar processes shaped these particle populations. We estimate that there are ≈5×1024 Karin and ≈1025 Veritas family particles with D>30 μm in the Solar System today. The IRAS observation of the dust bands may be satisfactorily modeled using ‘averaged’ SFDs that are constant with semimajor axis. These SFDs are best described by a broken power-law function with differential power index α≈2.1-2.4 for D?100 μm and by α?3.5 for 100 μm?D?1 cm. The total cross-sectional surface area of Veritas particles is a factor of ≈2 larger than the surface area of the particles producing the inner dust bands. The total volumes in Karin and Veritas family particles with 1 μm<D<1 cm correspond to D=11 km and D=14 km asteroids with equivalent masses ≈1.5×1018 g and ≈3.0×1018 g, respectively (assuming 2 g cm−3 bulk density). If the size-frequency and radial distribution of particles in the zodiacal cloud were similar to those in the asteroid dust bands, we estimate that the zodiacal cloud represents ∼3×1019 g of material (in particles with 1 μm<D<1 cm) at ±10° around the ecliptic and perhaps as much as ∼1020 g in total. The later number corresponds to about a 23-km-radius sphere with 2 g cm−3 density.  相似文献   

14.
We use Titan's geometric albedo to constrain the vertical distribution of the haze. Microphysical models incorporating fractal aggregates do not readily fit the methane features at 0.62 μm band and the dark 0.88 μm of the albedo spectrum simultaneously. We take advantage of this apparent discrepancy to constrain the haze vertical profile.We used the geometric albedo and several results and constraints from other works to better constrain the vertical haze extinction profile, especially in the low stratosphere. The objective of this model is to give a solution that simultaneously fits the main constraints known to apply to the haze.We find that the haze extinction increases with decreasing altitude with a scale height about equal to the atmospheric scale height down to 100 km. Below this altitude, extinction must decrease down to 30 km. This is necessary in order to have enough haze to sustain a relatively high albedo (0.076) in the dark 0.88 μm methane band and to show the 0.62 μm band in the haze continuum. We set the haze production rate around 7×10−14 kgm−2 s−1, and the aerosols production altitude around 400 km (or at pressure 1.5 Pa).The physical processes which generate such a profile are not clear. However, purely one-dimensional effects such as condensation, sedimentation, and rainout can be ruled out, and we believe that this relative clearing in Titan's troposphere and lower stratosphere is due to particle horizontal transport by the mean circulation.  相似文献   

15.
The atmospheres of Mars and Titan are loaded with aerosols that impact remote sensing observations of their surface. Here we present the algorithm and the first applications of a radiative transfer model in spherical geometry designed for planetary data analysis. We first describe a fast Monte-Carlo code that takes advantage of symmetries and geometric redundancies. We then apply this model to observations of the surface of Mars and Titan at the terminator as acquired by OMEGA/Mars Express and VIMS/Cassini. These observations are used to probe the vertical distribution of aerosols down to the surface. On Mars, we find the scale height of dust particles to vary between 6 km and 12 km depending on season. Temporal variations in the vertical size distribution of aerosols are also highlighted. On Titan, an aerosols scale height of 80 ± 10 km is inferred, and the total optical depth is found to decrease with wavelength as a power-law with an exponent of −2.0 ± 0.4 from a value of 2.3 ± 0.5 at 1.08 μm. Once the aerosols properties have been constrained, the model is used to retrieve surface reflectance properties at high solar zenith angles and just after sunset.  相似文献   

16.
The infrared AOTF spectrometer is a part of the SPICAM experiment onboard the Mars-Express ESA mission. The instrument has a capability of solar occultations and operates in the spectral range of 1-1.7 μm with a spectral resolution of ∼3.5 cm−1. We report results from 24 orbits obtained during MY28 at Ls 130°-160°, and the latitude range of 40°-55° N. For these orbits the atmospheric density from 1.43 μm CO2 band, water vapor mixing ratio based on 1.38 μm absorption, and aerosol opacities were retrieved simultaneously. The vertical resolution of measurements is better than 3.5 km. Aerosol vertical extinction profiles were obtained at 10 wavelengths in the altitude range from 10 to 60 km. The interpretation using Mie scattering theory with adopted refraction indices of dust and H2O ice allows to retrieve particle size (reff∼0.5-1 μm) and number density (∼1 cm−3 at 15-30 km) profiles. The haze top is generally below 40 km, except the longitude range of 320°-50° E, where high-altitude clouds at 50-60 km were detected. Optical properties of these clouds are compatible with ice particles (effective radius reff=0.1-0.3 μm, number density N∼10 cm−3) distributed with variance νeff=0.1-0.2 μm. The vertical optical depth of the clouds is below 0.001 at 1 μm. The atmospheric density profiles are retrieved from CO2 band in the altitude range of 10-90 km, and H2O mixing ratio is determined at 15-50 km. Unless a supersaturation of the water vapor occurs in the martian atmosphere, the H2O mixing ratio indicates ∼5 K warmer atmosphere at 25-45 km than predicted by models.  相似文献   

17.
We report the detection of Comet 67P/Churyumov-Gerasimenko's dust trail and nucleus in 24 μm Spitzer Space Telescope images taken February 2004. The dust trail is not found in optical Palomar images taken June 2003. Both the optical and infrared images show a distinct neck-line tail structure, offset from the projected orbit of the comet. We compare our observations to simulated images using a Monte Carlo approach and a dynamical model for comet dust. We estimate the trail to be at least one orbit old (6.6 years) and consist of particles of size ?100 μm. The neck-line is composed of similar sized particles, but younger in age. Together, our observations and simulations suggest grains 100 μm and larger in size dominate the total mass ejected from the comet. The radiometric effective radius of the nucleus is 1.87±0.08 km, derived from the Spitzer observation. The Rosetta spacecraft is expected to arrive at and orbit this comet in 2014. Assuming the trail is comprised solely of 1 mm radius grains, we compute a low probability (∼10−3) of a trail grain impacting with Rosetta during approach and orbit insertion.  相似文献   

18.
We present new observations of Jupiter's ring system at a wavelength of 2.2 μm obtained with the 10-m W.M. Keck telescopes on three nights during a ring plane crossing: UT 19 December 2002, and 22 and 26 January 2003. We used conventional imaging, plus adaptive optics on the last night. Here we present detailed radial profiles of the main ring, halo and gossamer rings, and interpret the data together with information extracted from radio observations of Jupiter's synchrotron radiation. The main ring is confined to a 800-km-wide annulus between 128,200 and 129,000 km, with a ∼5000 km extension on the inside. The normal optical depth is 8×10−6, 15% of which is provided by bodies with radii a?5 cm. These bodies are as red as Metis. Half the optical depth, τ≈4×10−6, is attributed to micron-sized dust, and the remaining τ≈3×10−6 to grains tens to hundreds of μm in size. The inward extension consists of micron-sized (a?10 μm) dust, which probably migrates inward under Poynting-Robertson drag. The inner limit of this extension falls near the 3:2 Lorentz resonance (at orbital radius r=122,400 km), and coincides with the outer limit of the halo. The gossamer rings appear to be radially confined, rather than broad sheets of material. The Amalthea ring is triangularly shaped, with a steep outer dropoff over ∼5000 km, extending a few 1000 km beyond the orbit of Amalthea, and a more gradual inner dropoff over 15,000-20,000 km. The inner edge is near the location of the synchronous orbit. The optical depth in the Amalthea ring is ∼5×10−7, up to 20% of which is comprised of macroscopic material. The optical depth in the Thebe ring is a factor of 3 smaller.  相似文献   

19.
In the current work we analyze properties of the dust mantle, its thickness and thermal conductivity, necessary to reproduce observed rate of water production of Comet 9P/Tempel 1. For this purpose we considered simplified shape of the comet nucleus approximated by the symmetric prolate ellipsoid with smooth surface. We have performed simulations, using models with dust mantle of the thickness either constant, but nonuniform (Model A), or evolving (Model B). The simulated profiles of water production versus time were compared with observations. In addition, we compared the calculated surface temperature with the real temperatures derived from IR observations (the Deep Impact mission). This new double-stage verification procedure, shows that our model A is a good representation for the nucleus of Comet Tempel 1. This indicates, that the dust mantle thickness should be nonuniform, but does not change significantly with time. We show, that reproducing observed high temperatures of the nucleus requires dust mantle, that is almost everywhere thick and has extremely low thermal inertia. The latter should be close to zero as already predicted by others. The agreement between the simulated and measured water production can be obtained when the dust is regionally thin and has the thermal inertia higher than average, according to our simulations about 100 W s1/2 K−1 m−2. Such regions should be located in the south hemisphere of the nucleus.  相似文献   

20.
Kevin Pang  Charles W. Hord 《Icarus》1973,18(3):481-488
The Mariner 9 ultraviolet spectrometer observed the brightness of a region on the south polar cap centered at approximately ?87°S, 10°W. Measurements taken at various incidence and emission angles (i and ?) show that the brightness increased with decreasing air mass, ≈(sec i + sec ?). The observed intensity consists primarily of a component reflected from the cap and twice-attenuated by the atmosphere and a component diffusely reflected from the atmosphere. The diffusely reflected component was determined from nearby observations of non-polar regions at the same incidence and emission angles and was substrated from the total intensity. Inversion of the intensity difference using a formula analogous to the Bouger-Langley law yielded the optical thickness of the atmosphere. The dust cloud over the polar cap was moderately thick between November 26 and December 2, 1971. At this time the optical thickness was near unity, and it decreased approximately linearly with time, reaching a value close to that of a Rayleigh atmosphere by mid-February. The optical thickness showed little dependence on the wavelength during the early orbital observations. As the dust storm cleared, the atmospheric optical thickness exhibited increasingly strong inverse wavelength dependence. Particles large compared with the wavelength dominated the Martian dust storm. These particles are estimated to have a mean radius of about 2 μm.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号