首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The thermo-elastic behavior of a natural epidote [Ca1.925 Fe0.745Al2.265Ti0.004Si3.037O12(OH)] has been investigated up to 1,200 K (at 0.0001 GPa) and 10 GPa (at 298 K) by means of in situ synchrotron powder diffraction. No phase transition has been observed within the temperature and pressure range investigated. P–V data fitted with a third-order Birch–Murnaghan equation of state (BM-EoS) give V 0 = 458.8(1)Å3, K T0 = 111(3) GPa, and K′ = 7.6(7). The confidence ellipse from the variance–covariance matrix of K T0 and K′ from the least-square procedure is strongly elongated with negative slope. The evolution of the “Eulerian finite strain” vs “normalized stress” yields Fe(0) = 114(1) GPa as intercept values, and the slope of the regression line gives K′ = 7.0(4). The evolution of the lattice parameters with pressure is slightly anisotropic. The elastic parameters calculated with a linearized BM-EoS are: a 0 = 8.8877(7) Å, K T0(a) = 117(2) GPa, and K′(a) = 3.7(4) for the a-axis; b 0 = 5.6271(7) Å, K T0(b) = 126(3) GPa, and K′(b) = 12(1) for the b-axis; and c 0 = 10.1527(7) Å, K T0(c) = 90(1) GPa, and K’(c) = 8.1(4) for the c-axis [K T0(a):K T0(b):K T0(c) = 1.30:1.40:1]. The β angle decreases with pressure, βP(°) = βP0 −0.0286(9)P +0.00134(9)P 2 (P in GPa). The evolution of axial and volume thermal expansion coefficient, α, with T was described by the polynomial function: α(T) = α0 + α1 T −1/2. The refined parameters for epidote are: α0 = 5.1(2) × 10−5 K−1 and α1 = −5.1(6) × 10−4 K1/2 for the unit-cell volume, α0(a) = 1.21(7) × 10−5 K−1 and α1(a) = −1.2(2) × 10−4 K1/2 for the a-axis, α0(b) = 1.88(7) × 10−5 K−1 and α1(b) = −1.7(2) × 10−4 K1/2 for the b-axis, and α0(c) = 2.14(9) × 10−5 K−1 and α1(c) = −2.0(2) × 10−4 K1/2 for the c-axis. The thermo-elastic anisotropy can be described, at a first approximation, by α0(a): α0(b): α0(c) = 1 : 1.55 : 1.77. The β angle increases continuously with T, with βT(°) = βT0 + 2.5(1) × 10−4 T + 1.3(7) × 10−8 T 2. A comparison between the thermo-elastic parameters of epidote and clinozoisite is carried out.  相似文献   

2.
A single crystal X-ray diffraction study on lithium tetraborate Li2B4O7 (diomignite, space group I41 cd) has been performed under pressure up to 8.3 GPa. No phase transitions were found in the pressure range investigated, and hence the pressure evolution of the unit-cell volume of the I41 cd structure has been described using a third-order Birch–Murnaghan equation of state (BM-EoS) with the following parameters: V 0  = 923.21(6) Å3, K 0  = 45.6(6) GPa, and K′ = 7.3(3). A linearized BM-EoS was fitted to the axial compressibilities resulting in the following parameters a 0  = 9.4747(3) Å, K 0a  = 73.3(9) GPa, K′ a  = 5.1(3) and c 0  = 10.2838(4) Å, K 0c  = 24.6(3) GPa, K′ c  = 7.5(2) for the a and c axes, respectively. The elastic anisotropy of Li2B4O7 is very large with the zero-pressure compressibility ratio β 0c /β 0a  = 3.0(1). The large elastic anisotropy is consistent with the crystal structure: A three-dimensional arrangement of relatively rigid tetraborate groups [B4O7]2− forms channels occupied by lithium along the polar c–axis, and hence compression along the c axis requires the shrinkage of the lithium channels, whereas compression in the a direction depends mainly on the contraction of the most rigid [B4O7]2− units. Finally, the isothermal bulk modulus obtained in this work is in general agreement with that derived from ultrasonic (Adachi et al. in Proceedings-IEEE Ultrasonic Symposium, 228–232, 1985; Shorrocks et al. in Proceedings-IEEE Ultrasonic Symposium, 337–340, 1981) and Brillouin scattering measurements (Takagi et al. in Ferroelectrics, 137:337–342, 1992).  相似文献   

3.
A synthetic clinopyroxene with composition LiFe3+Ge2O6, monoclinic s.g. P21/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) Å, β = 108.844(6)°, V = 442.75(16) Å3, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P21/c to C2/c at a transition temperature T tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T tr the thermal volume expansion is due to dilatation of the structure in the $(\bar{1}\,0\,1) A synthetic clinopyroxene with composition LiFe3+Ge2O6, monoclinic s.g. P21/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) ?, β = 108.844(6)°, V = 442.75(16) ?3, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P21/c to C2/c at a transition temperature T tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T tr the thermal volume expansion is due to dilatation of the structure in the ([`1] 0 1)(\bar{1}\,0\,1) plane, mostly along [0 1 0], and pure shear in the (0 1 0) plane due to the decrease of β. From comparison with silicate analogues, the germanate clinopyroxenes are more expansible, while the P21/c expands more than the C2/c phase. The evolution of Q 2 (calculated as the normalized intensity of b-type reflections) with T in the framework of the Landau theory has been done using a standard expression for a first order phase transition. We observe a jump of Q 02 = 0.538(2) at T tr, with T c of 481(7) K, b/a = −2,290 K, and c/a = 3,192 K, and thus far from being tri-critical point. A closely related composition (LiFe3+Si2O6) shows an equivalent phase transition at 228 K, which is very close to the tri-critical point and 561 K cooler. This result indicates that a change in the composition of tetrahedral sites can have dramatic effects on the P21/c ↔ C2/c displacive phase transition in clinopyroxenes. The major changes observed in the evolution of the crystal structure with T are observed in the M2 polyhedron, with a volume decrease by ca. 13.3%, compared to ca. 1.3% observed in the M1 polyhedron. The tetrahedra behave as rigid units with neither a significant change of volume at T > T tr (<1‰), nor a change of tilting of the basal plane. No change in coordination is observed at T > T tr in the M2 polyhedron, which remains sixfold coordinated although a strong deformation of this polyhedron is observed. This deformation is related to a strong change by 51.4° at T tr of the kinking angle (O3–O3–O3 angle) of the B-chain of tetrahedra, which switches from O-rotated to S-rotated [from 143.3(5)° to 194.7(6)°]. The A-chain is S-rotated at T < T tr [206.8(5)° at 703 K] and extends by 12° at the transition.  相似文献   

4.
The thermoelastic behavior of a natural clintonite-1M [with composition: Ca1.01(Mg2.29Al0.59Fe0.12)Σ3.00(Si1.20Al2.80)Σ4.00O10(OH)2] has been investigated up to 10 GPa (at room temperature) and up to 960°C (at room pressure) by means of in situ synchrotron single-crystal and powder diffraction, respectively. No evidence of phase transition has been observed within the pressure and temperature range investigated. P–V data fitted with an isothermal third-order Birch–Murnaghan equation of state (BM-EoS) give V 0 = 457.1(2) ?3, K T0 = 76(3)GPa, and K′ = 10.6(15). The evolution of the “Eulerian finite strain” versus “normalized stress” shows a linear positive trend. The linear regression yields Fe(0) = 76(3) GPa as intercept value, and the slope of the regression line leads to a K′ value of 10.6(8). The evolution of the lattice parameters with pressure is significantly anisotropic [β(a) = 1/3K T0(a) = 0.0023(1) GPa−1; β(b) = 1/3K T0(b) = 0.0018(1) GPa−1; β(c) = 1/K T0(c) = 0.0072(3) GPa−1]. The β-angle increases in response to the applied P, with: βP = β0 + 0.033(4)P (P in GPa). The structure refinements of clintonite up to 10.1 GPa show that, under hydrostatic pressure, the structure rearranges by compressing mainly isotropically the inter-layer Ca-polyhedron. The bulk modulus of the Ca-polyhedron, described using a second-order BM-EoS, is K T0(Ca-polyhedron) = 41(2) GPa. The compression of the bond distances between calcium and the basal oxygens of the tetrahedral sheet leads, in turn, to an increase in the ditrigonal distortion of the tetrahedral ring, with ∂α/∂P ≈ 0.1°/GPa within the P-range investigated. The Mg-rich octahedra appear to compress in response to the applied pressure, whereas the tetrahedron appears to behave as a rigid unit. The evolution of axial and volume thermal expansion coefficient α with temperature was described by the polynomial α(T) = α0 + α1 T −1/2. The refined parameters for clintonite are as follows: α0 = 2.78(4) 10−5°C−1 and α1 = −4.4(6) 10−5°C1/2 for the unit-cell volume; α0(a) = 1.01(2) 10−5°C−1 and α1(a) = −1.8(3) 10−5°C1/2 for the a-axis; α0(b) = 1.07(1) 10−5°C−1 and α1(b) = −2.3(2) 10−5°C1/2 for the b-axis; and α0(c) = 0.64(2) 10−5°C−1 and α1(c) = −7.3(30) 10−6°C1/2for the c-axis. The β-angle appears to be almost constant within the given T-range. No structure collapsing in response to the T-induced dehydroxylation was found up to 960°C. The HP- and HT-data of this study show that in clintonite, the most and the less expandable directions do not correspond to the most and the less compressible directions, respectively. A comparison between the thermoelastic parameters of clintonite and those of true micas was carried out.  相似文献   

5.
The compound NaFeGe2O6 was grown synthetically as polycrystalline powder and as large single crystals suitable for X-ray and neutron-diffraction experiments to clarify the low temperature evolution of secondary structural parameters and to determine the low temperature magnetic spins structure. NaFeGe2O6 is isotypic to the clinopyroxene-type compound aegirine and adopts the typical HT-C2/c clinopyroxene structure down to 2.5?K. The Na-bearing M2 polyhedra were identified to show the largest volume expansion between 2.5?K and room temperature, while the GeO4 tetrahedra behave as stiff units. Magnetic susceptibility measurements show a broad maximum around 33?K, which marks the onset of low-dimensional magnetic ordering. Below 12?K NaFeGe2O6 transforms to an incommensurately modulated magnetic spin state, with k?=?[0.323, 1.0, 0.080] and a helical order of spins within the M1-chains of FeO6 octahedra. This is determined by neutron-diffraction experiments on a single crystal. Comparison of NaFeGe2O6 with NaFeSi2O6 is given and it is shown that the magnetic ordering in the latter compound, aegirine, also is complex and is best described by two different spin states, a commensurate one with C2??/c?? symmetry and an incommensurate one, best being described by a spin density wave, oriented within the (1 0 1) plane.  相似文献   

6.
The compressibility at room temperature and the thermal expansion at room pressure of two disordered crystals (space group C2/c) obtained by annealing a natural omphacite sample (space group P2/n) of composition close to Jd56Di44 and Jd55Di45, respectively, have been studied by single-crystal X-ray diffraction. Using a Birch–Murnaghan equation of state truncated at the third order [BM3-EoS], we have obtained the following coefficients: V 0 = 421.04(7) Å3, K T0 = 119(2) GPa, K′ = 5.7(6). A parameterized form of the BM3 EoS was used to determine the axial moduli of a, b and c. The anisotropy scheme is β c  ≤ β a  ≤ β b , with an anisotropy ratio 1.05:1.00:1.07. A fitting of the lattice variation as a function of temperature, allowing for linear dependency of the thermal expansion coefficient on the temperature, yielded αV(1bar,303K) = 2.64(2) × 10−5 K−1 and an axial thermal expansion anisotropy of α b  ≫ α a  > α c . Comparison of our results with available data on compressibility and thermal expansion shows that while a reasonable ideal behaviour can be proposed for the compressibility of clinopyroxenes in the jadeite–diopside binary join [K T0 as a function of Jd molar %: K T0 = 106(1) GPa + 0.28(2) × Jd(mol%)], the available data have not sufficient quality to extract the behaviour of thermal expansion for the same binary join in terms of composition.  相似文献   

7.
The high-pressure X-ray diffraction study of a natural arsenopyrite was investigated up to 28.2 GPa using in situ angle-dispersive X-ray diffraction and a diamond anvil cell at National Synchrotron Light Source, Brookhaven National Laboratory. The 16:3:1 methanol–ethanol–water mixture was used as a pressure-transmitting medium. Pressures were measured using the ruby-fluorescence method. No phase change has been observed up to 28.2 GPa. The isothermal equation of state (EOS) was determined. The values of K 0, and K′ 0 refined with a third-order Birch–Murnaghan EOS are K 0 = 123(9) GPa, and K′ 0 = 5.2(8). Furthermore, we confirm that the linear compressibilities (β) along a, b and c directions of arsenopyrite is elastically isotropic (β a  = 6.82 × 10−4, β b  = 6.17 × 10−4 and β c  = 6.57 × 10−4 GPa−1).  相似文献   

8.
The dielectric constants and dielectric loss values of BeAl2O4 (chrysoberyl), MgAl2O4 (spinel), Be2SiO4 (phenacite), and Mg2SiO4 (forsterite) were measured at 1 MHz using a two-terminal method and empirically determined edge corrections. The results are: chrysoberyl, κ′ a =9.436, κ′ b =9.071, κ′ c =8.269; spinel, κ′ a =8.18; phenacite, κ′ a =6.28, κ′ c =6.06; and forsterite, κ′ a =6.867, κ′ b =7.392, κ′ c =6.739. The agreement between measured dielectric polarizabilities as determined from the Clausius-Mosotti equation and those calculated from the sum of oxide polarizabilities according to αD(M2M′X4) = 2αD(MX)+αD(M′X2) is ~ 1.0%.  相似文献   

9.
Minnesotaite, a 2:1 layer sheet silicate, is antifer-romagnetic below 30 K. A spin flop or metamagnetic transition occurs in a small applied magnetic field. Neutron diffraction and Mössbauer spectroscopy, in an external magnetic field of 4.0 T, show that the magnetic structure consists of Fe2+ spins coupled ferromagnetically in the c plane with alternate ferromagnetic planes coupled antiferromagnetically.  相似文献   

10.
The high-pressure behavior of the lattice elasticity of spodumene, LiAlSi2O6, was studied by static compression in a diamond-anvil cell up to 9.3 GPa. Investigations by means of single-crystal XRD and Raman spectroscopy within the hydrostatic limits of the pressure medium focus on the pressure ranges around ~3.2 and ~7.7 GPa, which have been reported previously to comprise two independent structural phase transitions. While our measurements confirm the well-established first-order C2/c–P21/c transformation at 3.19 GPa (with 1.2% volume discontinuity and a hysteresis between 0.02 and 0.06 GPa), both unit-cell dimensions and the spectral changes observed in high-pressure Raman spectra give no evidence for structural changes related to a second phase transition. Monoclinic lattice parameters and unit-cell volumes at in total 59 different pressure points have been used to re-calculate the lattice-related properties of spontaneous strain, volume strain, and the bulk moduli as a function of pressure across the transition. A modified Landau free energy expansion in terms of a one component order parameter has been developed and tested against these experimentally determined data. The Landau solution provides a much better reproduction of the observed anomalies than any equation-of-state fit to data sets truncated below and above P tr, thus giving Landau parameters of K 0 = 138.3(2) GPa, K′ = 7.46(5), λ V  = 33.6(2) GPa, a = 0.486(3), b = −29.4(6) GPa and c = 551(11) GPa.  相似文献   

11.
The structural evolution with pressure and the equations of state of three members of the brownmillerite solid solution, Ca2(Fe2−x Al x )O5, have been determined by single-crystal X-ray diffraction up to a maximum pressure of 9.73 GPa. The compositions of the samples were x = 0.00 and x = 0.37 (with Pnma symmetry) and x = 0.55 (with I2mb symmetry). No phase transitions were observed in the experiments. The equation of state parameters determined from the pressure-volume data are K 0T = 128.0 (7) GPa, K′0 = 5.8 (3) for the sample with x = 0.00, K 0T = 131 (2) GPa, K′0 = 5.5 (4) for x = 0.37, and K 0T = 137.5 (6) GPa, K′0 = 4 for x = 0.55. The bulk modulus therefore increases with Al content, being 11% higher in the x = 0.55 sample than in the Al-free sample. The unit-cell compression is anisotropic, with the c-axis being stiffer than a or b, and the anisotropy increases with increasing Al content of the structure. The structural response to pressure of all samples is similar. The (Al,Fe)O4 tetrahedra and the (Al,Fe)O6 octahedra undergo approximately isotropic compression. There is an increase in the twists of the chains of corner-sharing (Al,Fe)O4 tetrahedra, and an increase in the tilts of the (Al,Fe)O6 octahedra, because these framework polyhedra are stiffer than the Ca–O bonds to the extra-framework Ca site. The alignment of the two shortest Ca–O bonds sub-parallel to [001] accounts for the relative stiffness of the c-axis and thus the elastic anisotropy. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

12.
The crystal and magnetic structures of ilvaite Ca(Fe2+, Fe3+)Fe2+Si2O7O(OH) have been obtained by profile refinement of high resolution neutron powder data from a natural sample from Seriphos, Greece. Below about 400 K an electronic transition from an itinerant to an ordered state is expected, with the structure changing from orthorhombic to monoclinic. The structure remains monoclinic P2 1/a down to 5 K, with Fe2+ almost completely ordered on one of the A-sites and Fe3+ on the other: the ordering may increase with decreasing temperature. The B-site contains Fe2+ plus a small amount of Mn2+ impurity. There are two magnetic transitions, at 116 K and 40 K: at 80 K the Fe2+ and Fe3+ spins on the A-sites along one infinite c-axis chain are parallel, and antiparallel to those along the adjoined edge-sharing centrosymmetrically related chain. The spin vectors are all perpendicular to the plane of these chains, i.e. almost parallel to the crystallographic b-axis. At 5 K, this order is maintained, but the Fe2+ spins on the B-sites order antiferromagnetically as well, again almost along the b-axis. These results explain the earlier Mössbauer and magnetisation measurements.  相似文献   

13.
The crystal structure of chromite FeCr2O4 was investigated to 13.7 GPa and ambient temperature with single-crystal X-ray diffraction techniques. The unit-cell parameter decreases continuously from 8.3832 (5) to 8.2398 (11) Å up to 11.8 GPa. A fit to the Birch–Murnaghan equation of state (EoS) based on the P–V data gives: K 0 = 209 (13) GPa, K′ = 4.0 (fixed), and V 0 = 588 (1) Å3. The FeO4 tetrahedra and CrO6 octahedra are compressed isotropically with pressure with their Fe–O and Cr–O bond distances decreasing from 1.996 (6) to 1.949 (7) Å and from 1.997 (3) to 1.969 (7) Å, respectively. The tetrahedral site occupied by the Fe2+ cation is more compressible than the octahedral site occupied by the Cr3+ cation. The resulting EoS parameters for the tetrahedral and the octahedral sites are K 0 = 147 (9) GPa, K′ = 4.0 (fixed), V 0 = 4.07 (1) Å3 and K 0 = 275 (24) GPa, K′ = 4.0 (fixed), V 0 = 10.42 (2) Å3, respectively. A discontinuous volume change is observed between 11.8 and 12.6 GPa. This change indicates a phase transition from a cubic (space group Fd-[`3]{\overline{3}} m) to a tetragonal structure (space group I41 /amd). At the phase transition boundary, the two Cr–O bonds parallel to the c-axis shorten from 1.969 (7) to 1.922 (17) Å and the other four Cr–O bonds parallel to the ab plane elongate from 1.969 (7) to 1.987 (9) Å. This anisotropic deformation of the octahedra leads to tetragonal compression of the unit cell along the c-axis. The angular distortion in the octahedron decreases continuously up to 13.7 GPa, whereas the distortion in the tetrahedron rises dramatically after the phase transition. At the pressure of the phase transition, the tetrahedral bond angles along the c-axis direction of the unit cell begin decreasing from 109.5° to 106.6 (7)°, which generates a “stretched” tetrahedral geometry. It is proposed that the Jahn–Teller effect at the tetrahedrally coordinated Fe2+ cation becomes active with compression and gives rise to the tetrahedral angular distortion, which in turn induces the cubic-to-tetragonal transition. A qualitative molecular orbital model is proposed to explain the origin and nature of the Jahn–Teller effect observed in this structure and its role in the pressure-induced phase transition.  相似文献   

14.
The elastic behaviour and the high-pressure structural evolution of a natural topaz, Al2.00Si1.05O4.00(OH0.26F1.75), have been investigated by means of in situ single-crystal X-ray diffraction up to 10.55(5) GPa. No phase transition has been observed within the pressure range investigated. Unit-cell volume data were fitted with a third-order Birch-Murnaghan Equation of State (III-BM-EoS). The III-BM-EoS parameters, simultaneously refined using the data weighted by the uncertainties in P and V, are: V 0=345.57(7) Å3, K T0=164(2) GPa and K′=2.9(4). The axial-EoS parameters are: a 0=4.6634(3) Å, K T0(a)=152(2) GPa, K′(a)=2.8(4) for the a-axis; b 0=8.8349(5) Å, K T0(b)=224(3) GPa, K′(b)=2.6(6) for the b-axis; c 0=8.3875(7) Å, K T0(c)=137(2) GPa, K′(c)=2.9(4) for the c-axis. The magnitude and the orientation of the principal Lagrangian unit-strain ellipsoid were determined. At P−P 0=10.55 GPa, the ratios ε1:ε2:ε3 are 1.00:1.42:1.56 (with ε1||b, ε2||a, ε3||c and |ε3| > |ε2| > |ε1|). Four structural refinements, performed at 0.0001, 3.14(5), 5.79(5) and 8.39(5) GPa describe the structural evolution in terms of polyhedral distortions.  相似文献   

15.
Single-crystal and powder electron paramagnetic resonance (EPR) spectroscopic studies of natural amethyst quartz, before and after isochronal annealing between 573 and 1,173 K, have been made from 90 to 294 K. Single-crystal EPR spectra confirm the presence of two substitutional Fe3+ centers. Powder EPR spectra are characterized by two broad resonance signals at g = ~10.8 and 4.0 and a sharp signal at g = 2.002. The sharp signal is readily attributed to the well-established oxygen vacancy electron center E 1′. However, the two broad signals do not correspond to any known Fe3+ centers in the quartz lattice, but are most likely attributable to Fe3+ clusters on surfaces. The absolute numbers of spins of the Fe3+ species at g = ~10.8 have been calculated from powder EPR spectra measured at temperatures from 90 to 294 K. These results have been used to extract thermodynamic potentials, including Gibbs energy of activation ΔG, activation energy E a, entropy of activation ΔS and enthalpy of activation ΔH for the Fe3+ species in amethyst. In addition, magnetic susceptibilities (χ) have been calculated from EPR data at different temperatures. A linear relationship between magnetic susceptibility and temperature is consistent with the Curie–Weiss law. Knowledge about the stability and properties of Fe3+ species on the surfaces of quartz is important to better understanding of the reactivity, bioavailability and heath effects of iron in silica particles.  相似文献   

16.
A natural Ca-poor pigeonite (Wo6En76Fs18) from the ureilite meteorite sample PCA82506-3, free of exsolved augite, was studied by in situ high-temperature single-crystal X-ray diffraction. The sample, monoclinic P21/c, was annealed up to 1,093°C to induce a phase transition from P21/c to C2/c symmetry. The variation with increasing temperature of the lattice parameters and of the intensity of the b-type reflections (h + k = 2n + 1, present only in the P21/c phase) showed a displacive phase transition P21/c to C2/c at a transition temperature T Tr = 944°C, first order in character. The Fe–Mg exchange kinetics was studied by ex situ single-crystal X-ray diffraction in a range of temperatures between the closure temperature of the Fe–Mg exchange reaction and the transition temperature. Isothermal disordering annealing experiments, using the IW buffer, were performed on three crystals at 790, 840 and 865°C. Linear regression of ln k D versus 1/T yielded the following equation: ln k\textD = - 3717( ±416)/T(K) + 1.290( ±0.378);    (R2 = 0.988) \ln \,k_{\text{D}} = - 3717( \pm 416)/T(K) + 1.290( \pm 0.378);\quad (R^{2} = 0.988) . The closure temperature (T c) calculated using this equation was ∼740(±30)°C. Analysis of the kinetic data carried out taking into account the e.s.d.'s of the atomic fractions used to define the Fe–Mg degree of order, performed according to Mueller’s model, allowed us to retrieve the disordering rate constants C 0 K dis+ for all three temperatures yielding the following Arrhenius relation: ln( C0 K\textdis + ) = ln K0 - Q/(RT) = 20.99( ±3.74) - 26406( ±4165)/T(K);    (R2 = 0.988) \ln \left( {C_{0} K_{\text{dis}}^{ + } } \right) = \ln \,K_{0} - Q/(RT) = 20.99( \pm 3.74) - 26406( \pm 4165)/T(K);\quad (R^{2} = 0.988) . An activation energy of 52.5(±4) kcal/mol for the Fe–Mg exchange process was obtained. The above relation was used to calculate the following Arrhenius relation modified as a function of X Fe (in the range of X Fe = 0.20–0.50): ln( C0 K\textdis + ) = (21.185 - 1.47X\textFe ) - \frac(27267 - 4170X\textFe )T(K) \ln \left( {C_{0} K_{\text{dis}}^{ + } } \right) = (21.185 - 1.47X_{\text{Fe}} ) - {\frac{{(27267 - 4170X_{\text{Fe}} )}}{T(K)}} . The cooling time constant, η = 6 × 10−1 K−1 year−1 calculated on the PCA82506-3 sample, provided a cooling rate of the order of 1°C/min consistent with the extremely fast late cooling history of the ureilite parent body after impact excavation.  相似文献   

17.
A high temperature single-crystal X-ray diffraction study of enstatite, Mg2Si2O6 was undertaken at 296, 900, 1200, 1360 and 1400 K. During the X-ray data collection at 1360 K (T0), orthoenstatite (Pbca) transformed to protoenstatite (Pbcn). The unit cell parameters measured at T0 are a=18.456(4), b=8.960(2) and c=5.270(1) Å for ortho and a=9.306(1), b=8.886(1) and c=5.360(1) Å for proto. The discontinuous increase in c and decrease in b due to the ortho to proto transformation are associated with the drastic unkinking of the silicate chains, whereas the abrupt increase in a results from the large expansion of the M2 — O distances along a coupled with the increase in the out-of-plane tilting of the silicate tetrahedra. Stacking faults form in ortho prior to the phase transition, as well as in proto between 1360 and 1400 K. With increasing temperature, the silicate B chain in ortho straightens faster than the A chain as the configurations of the SiA and SiB tetrahedra tend to become similar. At T0, the A and B chains with the O3-O3-O3 angles (O3 being the bridging oxygen atom) of 163.0° and 149.5° in ortho, respectively, attain an identical angle of 168.4° in proto. The configuration of the silicate chain in proto resembles that of the A chain in ortho. Rigid-body thermal vibration analysis suggests that between 1200 and 1400 K the largest, the second largest and the smallest thermal librational motions of the [SiO4] tetrahedra in both ortho and proto are approximately around a, c and b, respectively. Below 1200 K, the largest thermal librational amplitudes of the SiA and SiB tetrahedra in ortho are quite different, but become nearly equivalent at T0. In contrast to the results reported for all iron-bearing orthopyroxenes at high temperature, switching of the O3B atoms coordinated with the M2 cation occurs during the ortho to proto transformation, but not in ortho below T0. The ortho-proto transition does not affect the configuration of the M1 octahedron significantly, but results in a decrease of the mean M2 — O bond distance by 0.043 Å and a highly distorted M2 octahedron in proto.  相似文献   

18.
The thermoelastic behaviour of anthophyllite has been determined for a natural crystal with crystal-chemical formula ANa0.01 B(Mg1.30Mn0.57Ca0.09Na0.04) C(Mg4.95Fe0.02Al0.03) T(Si8.00)O22 W(OH)2 using single-crystal X-ray diffraction to 973 K. The best model for fitting the thermal expansion data is that of Berman (J Petrol 29:445–522, 1988) in which the coefficient of volume thermal expansion varies linearly with T as α V,T  = a 1 + 2a 2 (T − T 0): α298 = a 1 = 3.40(6) × 10−5 K−1, a 2 = 5.1(1.0) × 10−9 K−2. The corresponding axial thermal expansion coefficients for this linear model are: α a ,298 = 1.21(2) × 10−5 K−1, a 2,a  = 5.2(4) × 10−9 K−2; α b ,298 = 9.2(1) × 10−6 K−1, a 2,b  = 7(2) × 10−10 K−2. α c ,298 = 1.26(3) × 10−5 K−1, a 2,c  = 1.3(6) × 10−9 K−2. The thermoelastic behaviour of anthophyllite differs from that of most monoclinic (C2/m) amphiboles: (a) the ε 1 − ε 2 plane of the unit-strain ellipsoid, which is normal to b in anthophyllite but usually at a high angle to c in monoclinic amphiboles; (b) the strain components are ε 1 ≫ ε 2 > ε 3 in anthophyllite, but ε 1 ~ ε 2 ≫ ε 3 in monoclinic amphiboles. The strain behaviour of anthophyllite is similar to that of synthetic C2/m ANa B(LiMg) CMg5 TSi8 O22 W(OH)2, suggesting that high contents of small cations at the B-site may be primarily responsible for the much higher thermal expansion ⊥(100). Refined values for site-scattering at M4 decrease from 31.64 epfu at 298 K to 30.81 epfu at 973 K, which couples with similar increases of those of M1 and M2 sites. These changes in site scattering are interpreted in terms of Mn ↔ Mg exchange involving M1,2 ↔ M4, which was first detected at 673 K.  相似文献   

19.
 The crystal structure of intermediate incommensurate tridymite was refined at 150 °C from powder data. Upon cooling from above 220 °C, the basic structure with space group symmetry C2221 is gradually distorted from orthorhombic to monoclinic symmetry. With decreasing temperature, the monoclinic angle γ smoothly opens up to 90.3°, while a displacive modulation with temperature-dependent wavelength develops. The 3 + 1 dimensional superspace group of the incommensurate phase is C1121(αβ0). The modulation mainly consists of two sinusoidal transverse displacement waves for the silicon atoms coupled to rotations of the rigid SiO4/2 tetrahedra. The wave vector is r=0.1192(1)a* − 0.0043(1)b* at 150 °C. Below 150 °C tridymite discontinuously transforms to another orthorhombic phase and the modulation partially locks in at the wave vector r 1=1/3a*. Simultaneously, an additional incommensurate modulation with r 2= 0.0395(1)b* − 0.3882(1)c* is formed. The two-dimensional modulation does not vary significantly with the temperature. Received: 13 September 2000 / Accepted: 29 January 2001  相似文献   

20.
A compressional study of (Na,Ca)(Ti3+,Mg)Si2O6-clinopyroxenes was carried out at high pressures between 10−4 and 10.2 GPa using in situ single-crystal X-ray diffraction, Raman spectroscopy and optical absorption spectroscopy. Compressional discontinuities accompanied by structural changes, in particular, the appearance of two distinct Ti3+–Ti3+ distances within the octahedral chains at 4.37 GPa, provide evidence for the occurrence of a phase transition in NaTi3+Si2O6. Equation-of-state parameters are K 0 = 115.9(7) GPa with K′ = −0.9(3) and K 0 = 102.7(8) GPa with K′ = 4.08(5) for the low- and high-pressure range, respectively. The transition involves a C2/c–P [`1] \overline{1} symmetry change, which can be confirmed by the occurrence of new modes in Raman spectra. Since no significant discontinuity in the evolution of the unit-cell volume with pressure has been observed, the transition appears to be second-order in character. The influence of the coupled substitution Na+Ti3+↔Ca2+Mg2+ on the static compression behavior and the structural stability has been investigated using a sample of the intermediate composition (Na0.54Ca0.46)(Mg0.46Ti0.54)Si2O6. No evidence for a deviation from continuous compression behavior has been found, neither in lattice parameter nor in structural data and the fit of a third-order Birch–Murnaghan equation-of-state to the pressure–volume data yields a bulk modulus of K 0 = 109.1(5) GPa and K′ = 5.02(13). Raman and polarized absorption spectra have been compared to NaTiSi2O6 and reveal major similarities. The main driving force for the phase transition in NaTi3+Si2O6 is the localization of the Ti3+ d-electron and the accompanying distortion, which is suppressed in the (Na,Ca)(Ti3+,Mg)Si2O6-clinopyroxene.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号