共查询到20条相似文献，搜索用时 31 毫秒
1.
Sequence stratigraphy of the Lower Cenomanian Bahariya Formation, Bahariya Oasis, Western Desert, Egypt 总被引：1，自引：0，他引：1
The Lower Cenomanian Bahariya Formation corresponds to a second-order depositional sequence that formed within a continental shelf setting under relatively low-rate conditions of positive accommodation (< 200 m during 3–6 My). This overall trend of base-level rise was interrupted by three episodes of base-level fall that resulted in the formation of third-order sequence boundaries. These boundaries are represented by subaerial unconformities (replaced or not by younger transgressive wave ravinement surfaces), and subdivide the Bahariya Formation into four third-order depositional sequences.
The construction of the sequence stratigraphic framework of the Bahariya Formation is based on the lateral and vertical changes between shelf, subtidal, coastal and fluvial facies, as well as on the nature of contacts that separate them. The internal (third-order) sequence boundaries are associated with incised valleys, which explain (1) significant lateral changes in the thickness of incised valley fill deposits, (2) the absence of third-order highstand and even transgressive systems tracts in particular areas, and (3) the abrupt facies shifts that may occur laterally over relatively short distances. Within each sequence, the concepts of lowstand, transgressive and highstand systems tracts are used to explain the observed lateral and vertical facies variability.
This case study demonstrates the usefulness of sequence stratigraphic analysis in understanding the architecture and stacking patterns of the preserved rock record, and helps to identify 13 stages in the history of base-level changes that marked the evolution of the Bahariya Oasis region during the Early Cenomanian. 相似文献
2.
3.
Depositional facies have been hypothesized to be linked to sequence stratigraphic positions. Also, shoreline systems are built by mixed processes, including rivers, storms, fair-weather waves and tides. Resolving the complexity of shoreline deposition requires detailed quantitative facies analysis with particular attention to heterolithic successions. In this study, 71 sections in a 130 km long outcrop belt of the Cretaceous Gallup Formation in the north-west of the San Juan Basin were measured. Five major facies associations were identified using sedimentological and iconological interpretations, including offshore shelf, non-deltaic shoreline sandstones, deltas, coastal bayline and fluvial. Each facies association also comprises subordinate facies. Depositional facies interpretations are placed in a high-resolution sequence stratigraphic framework that allows for reconstructions of the palaeogeography of individual parasequence sets that demonstrate temporal and spatial evolution of facies associations and depositional processes. The results show that the Gallup is a mixed-process-controlled depositional system with fair-weather and storm-wave dominance, river influence and tide-effect, contrasting with previous interpretations of a solely fair-weather wave-dominated environment. Depositional processes and the resultant facies change with sequence stratigraphic positions in response to relative sea-level changes – particular facies are only deposited in certain systems tracts. Distinction and transition between non-deltaic shorefaces and wave-dominated deltas have also been documented in this study. Non-deltaic shorefaces are characterized by homogeneous sandstones with a wide-range bioturbation index and the absence of mudstones. Wave-dominated deltas are subject to river influence and contain prodelta facies. This study shows the importance of detailed facies analysis with high-resolution sequence stratigraphic control using outcrops for documenting sedimentary processes of shallow marine shoreline systems. 相似文献
4.
层序地层中的混合沉积作用及其控制因素 总被引：10，自引：0，他引：10
简要介绍了硅质碎屑与碳酸盐混合沉积有关概念及混合沉积作用类型,分析了层序体系域中的混合沉积作用及其控制因素。总结认为,硅质碎屑与碳酸盐的混合沉积作用不仅发生在低水位体系域（LST）,而且其它各体系域中也都有不同程度的混合沉积现象,但混合沉积作用方式有差别：LST主要为源区混合,陆棚边缘体系域（SMT）和高水位体系域（HST）晚期以间断混合及相混合占优,海浸体系域（TST）早期以间断混合为主。综合研究显示,准层序一级的海平面变化型式差异可能是导致层序体系域混合沉积作用的主要因素,其中,LST、SMT、晚期HST的混合沉积作用分别与准层序一级海平面变化的幅度、速率、位置和持续时间有关,TST则受控于物源供给;先期地形、气候变化（含碳酸盐生产速率影响）或多或少对体系域的混合沉积作用有影响。此外,某些情况下层序体系域的混合沉积作用可能会受到局部构造活动影响,而层序组或超层序内层序体系域的混合沉积作用强弱及其旋回性变化可以提供脉动性区域构造活动信息。 相似文献
5.
Conglomerate bodies are wide spread in the Lower Coniacian carbonate of the southern of Tunisia. This paper presents an examination of the stratigraphic architecture of these Coniacian conglomerates. It aims to the understanding of the processes leading to their genesis and the relationship and context with the late Cretaceous sedimentation. These conglomerates are related to the incision of Aptian palaeovalleys in a carbonate platform in an extensional setting. The sedimentary analysis and the geometry of these bodies show that the Cretaceous succession in this area are formed by eight facies within four facies associations, representing a series of distinct depositional environments ranging from alluvial plain to the open marine environment. The sedimentary analysis allowed the recognization of elementary sequence which start with the conglomerate bodies corresponding to the incised valley fills. 相似文献
6.
Mahnaz SABBAGH BAJESTANI Asadollah MAHBOUBI Reza MOUSSAVI-HARAMI Ihsan AL-AASM Mehdi NADJAFI 《《地质学报》英文版》2017,91(5):1797-1819
The study area is located in the east Tabas Block in Central Iran. Facies analysis of the Qal’eh Dokhtar Formation (middle Callovian to late Oxfordian) was carried out on two stratigraphic sections and applied to depositional environment and sequence stratigraphy interpretation. This formation conformably overlies and underlies the marly-silty Baghamshah and the calcareous Esfandiar formations, respectively. Lateral and vertical facies changes documents low- to high energy environments, including tidal-flat, beach to intertidal, lagoon, barrier, and open-marine. According to these facies associations and absence of resedimentation deposits a depositional model of a mixed carbonate–siliciclastic ramp was proposed for the Qal’eh Dokhtar Formation. Seven third-order depositional sequences were identified in each two measured stratigraphic sections. Transgressive systems tracts (TSTs) show deepening upward trends, i.e. shallow water beach to intertidal and lagoonal facies, while highstand systems tracts (HST) show shallowing upward trends in which deep water facies are overlain by shallow water facies. All sequence boundaries (except at the base of the stratigraphic column) are of the no erosional (SB2) types. We conclude eustatic rather than tectonic factors played a dominant role in controlling carbonate depositional environments in the study area. 相似文献
7.
Antonio Herrero‐Hernndez Fernando Gmez‐Fernndez Francisco Javier Lpez‐Moro 《Geological Journal》2015,50(1):39-55
The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
The Seven Rivers Formation exposed in Slaughter Canyon, Guadalupe Mountains, New Mexico, reveals complex relations between long- and short-term relative changes in sea-level, shelf configuration and sedimentation, which interacted to create a distinct toplap geometry. At least five sandstones diverge basinward from a prominent boundary unit marking the surface of toplap at the top of the Seven Rivers Formation and create a series of prograding, shingled clinoforms. The boundary unit is a horizontal, well-sorted, quartz arenite underlain across the shelf by peritidal carbonate or by other merging sandstones. Preserved palaeotopography is indicated by facies changes downdip and the presence of horizontal geopetal indicators in inclined beds. Near the boundary unit (updip), merging sandstones contain rare sedimentary structures including evaporite moulds and irregular fenestrae and are bounded above and below by peritidal carbonate with microbial laminae, fenestral fabrics and mudcracks. Laterally (downdip), the sandstone-bounding peritidal carbonate facies pass into subtidal carbonate facies (ooid-peloid-fusulinid-dasyclad-mollusc pack- and grainstone) and interbedded sandstones contain sedimentary structures such as ripple marks and trough to planar cross-stratification, as well as ooids, fusulinids and other carbonate grains. Toplap is interpreted to have developed by sediment bypass across a subaerially exposed shelf while sedimentation continued in still-submerged areas downdip from the shelf crest, and hence represents depositional toplap. Physical tracing of subaerial exposure surfaces suggests that the shoreline migrated up and down palaeoslope several times. The vertical component of five short-term shoreline migrations decreased during formation of the toplap geometry. Sea-level rose to approximately the same position following each fall to create the toplap geometry. This depositional toplap is the stratigraphic result of high-‘frequency’ relative changes of sea-level that combined to produce the larger-scale geometry. We suggest that changing amplitudes of relative sea-level may play a significant role in the stratigraphic evolution of platforms and that separating ‘short-term’and ‘long-term’relative sea-level may be ambiguous in such instances. 相似文献
9.
The Quilalar Formation and correlative Mary Kathleen Group in the Mount Isa Inlier, Australia, conformably overlie rift-related volcanics and sediments and non-conformably overlie basement rocks. They represent a thermal-relaxation phase of sedimentation between 1780 and 1740 Ma. Facies analysis of the lower siliciclastic member of the Quilalar Formation and the coeval Ballara Quartzite permits discrimination of depositional systems that were restricted areally to either N-S-trending marginal platform or central trough palaeogeographic settings. Four depositional systems, each consisting of several facies, are represented in the lower Quilalar Formation-Ballara Quartzite; these are categorized broadly as storm-dominated shelf (SDS), continental (C), tide-dominated shelf (TDS) and wave-dominated shoreline (WDS). SDS facies consist either of black pyritic mudstone intervals up to 10 m thick, or mudstone and sandstone associated in 6–12-m-thick, coarsening-upward parasequences. Black mudstones are interpreted as condensed sections that developed as a result of slow sedimentation in an outer-shelf setting starved of siliciclastic influx. Vertical transition of facies in parasequences reflects flooding followed by shoaling of different shelf subenvironments; the shoreface contains evidence of subaerial exposure. Continental facies consist of fining-upward parasequences of fluvial origin and tabular, 0·4–4-m-thick, aeolian parasequences. TDS facies are represented by stacked, tabular parasequences between 0·5 and 5 m thick. Vertical arrangement of facies in parasequences reflects flooding and establishment of a tidal shelf followed by shoaling to intertidal conditions. WDS facies are preserved in 0·5–3-m-thick, stacked, tabular parasequences. Vertical transition of facies reflects initial flooding with wave reworking of underlying arenites along a ravinement surface, followed by shoaling from lower shoreface to foreshore conditions. Parasequences are stacked in retrogradational and progradational parasequence sets. Retrogradational sets consist of thin SDS parasequences in the trough, and C, TDS and probably WDS parasequences on the platforms. Thick SDS parasequences in the trough, and TDS, subordinate C and probably WDS parasequences on the platforms make up progradational parasequence sets. Depositional systems are associated in systems tracts that make up 40–140-m-thick sequences bounded by type-2 sequence boundaries that are disconformities. Transgressive systems tracts consist of C, TDS and probably WDS depositional systems on the platforms and the SDS depositional system and suspension mudstone deposits in the trough. The transgressive systems tract is characterized by retrogradational parasequence sets and developed in response to accelerating rates of sea-level rise following lowstand. Condensed-section deposits in the trough, and the thickest TDS parasequences on the platforms reflect maximum rates of sea-level rise and define maximum flooding surfaces. Highstand systems tract deposits are progradational. Early highstand systems tracts are represented by TDS and probably WDS depositional systems on the platforms and suspension mudstone deposits in the trough and reflect decreasing rates of sea-level rise. Later highstand systems tracts consist of the progradational SDS depositional system in the trough and, possibly, thin continental facies on the platforms. This stage of sequence development is related to slow rates of sea-level rise, stillstand and slow rates of fall. Lowstand deposits of shelf-margin systems tracts are not recognized but may be represented by shoreface deposits at the top of progradational SDS parasequence sets. 相似文献
10.
NOEL P. JAMES CAROLYN H. EYLES† NICHOLAS EYLES‡ ERIC E. HIATT§ T. KURTIS KYSER 《Sedimentology》2009,56(2):367-397
Uplifted during the 1964 Alaskan earthquake, extensive intertidal flats around Middleton Island expose 1300 m of late Cenozoic (Early Pleistocene) Yakataga Formation glaciomarine sediments. These outcrops provide a unique window into outer shelf and upper slope strata that are otherwise buried within the south‐east Alaska continental shelf prism. The rocks consist of five principal facies in descending order of thickness: (i) extensive pebbly mudstone diamictite containing sparse marine fossils; (ii) proglacial submarine channel conglomerates; (iii) burrowed mudstones with discrete dropstone layers; (iv) boulder pavements whose upper surfaces are truncated, faceted and striated by ice; and (v) carbonates rich in molluscs, bryozoans and brachiopods. The carbonates are decimetre scale in thickness, typically channellized conglomeratic event beds interpreted as resedimented deposits on the palaeoshelf edge and upper slope. Biogenic components originated in a moderately shallow (ca 80 m), relatively sediment‐free, mesotrophic, sub‐photic setting. These components are a mixture of parautochthonous large pectenids or smaller brachiopods with locally important serpulid worm tubes and robust gastropods augmented by sand‐size bryozoan and echinoderm fragments. Ice‐rafted debris is present throughout these cold‐water carbonates that are thought to have formed during glacial periods of lowered sea‐level that allowed coastal ice margins to advance near to the shelf edge. Such carbonates were then stranded during subsequent sea‐level rise. Productivity was enabled by attenuation of terrigenous mud deposition during these cold periods via reduced sedimentation together with active wave and tidal‐current winnowing near the ice front. Redeposition was the result of intense storms and possibly tsunamis. These sub‐arctic mixed siliciclastic‐carbonate sediments are an end‐member of the Phanerozoic global carbonate depositional realm whose skeletal attributes first appeared during late Palaeozoic southern hemisphere deglaciation. 相似文献
11.
《Gondwana Research》2002,5(3):683-699
The early Carboniferous sedimentation of the Tethyan Margin of Gondwana in the Kashmir Himalaya represents alternating siliciclastic - carbonate succession consisting of distinct stratigraphic sequences which are bounded by discontinuities. The discontinuities in the sedimentation are related to environmental changes in the form of subaerial exposure, subaqueous erosion, subaqueous omission or changes in texture and facies. These distinct surface zones or time significant boundaries can be correlated across the depositional platform. Low stand, high stand and transgressive sedimentation units in the lower and middle parts of early Carboniferous Syringothyris Limestone Formation in Banihal area have been recognised. This is explained by superposition of high frequency and low amplitude sea level fluctuations on a large-scale trend under greenhouse conditions during the early Carboniferous period. The facies associations present in the early Carboniferous succession of the Himalaya broadly represent intertidal (peritidal), shallow subtidal, deeper subtidal, off-shore-slope and deeper environments. Discontinuities that are interpreted as progradational, retrogradational and aggradational phases of sedimentation bound these facies associations. This formation represents continental margin depositional setting which is authenticated by deposition of siliciclastic sediments. This marginal depositional setting is greatly affected by numerous dynamic processes including tectonic and other active sea as well as continental processes. The records of all those processes in this formation reflect the eustatic changes in sea level. These periodic eustatic changes have generated the various discontinuities, stratigraphic sequences or systems tracts. Overall it appears that interplay of many processes such as sediment supply, thermal and tectonic activity, eustatic and climatic changes in the Kashmir Tethyan depositional basin generated these distinct depositional sequences during the early Carboniferous period. 相似文献
12.
Although sequence stratigraphic concepts have been applied extensively to coarse-grained siliciclastic deposits in nearshore environments, high-resolution sequence stratigraphic analysis has not been widely applied to mudstone-dominated sedimentary successions deposited in more distal hemipelagic to pelagic settings. To examine how sequence stratigraphic frameworks can be derived from the facies variability of mudstone-dominated successions, the Tununk Shale Member of the Mancos Shale Formation in south-central Utah (USA) was examined in detail through a combination of sedimentological, stratigraphic and petrographic methods. The Tununk Shale accumulated on a storm-dominated shelf during the second-order Greenhorn sea-level cycle. During this eustatic event, the depositional environment of the Tununk Shale shifted laterally from distal middle shelf to outer shelf, then from an outer shelf to an inner shelf environment. At least 49 parasequences can be identified within the Tununk Shale. Each parasequence shows a coarsening-upward trend via upward increases in silt and sand content, thickness and lateral continuity of laminae/beds, and abundance of storm-generated sedimentary structures. Variations in bioturbation styles within parasequences are complex, although abrupt changes in bioturbation intensity or diversity commonly occur across parasequence boundaries (i.e. flooding surfaces). Due to changes in depositional environments, dominant sediment supply and bioturbation characteristics, parasequence styles in the Tununk Shale show considerable variability. Based on parasequence stacking patterns, eleven system tracts, four depositional sequences and key sequence stratigraphic surfaces can be identified. The high-resolution sequence stratigraphic framework of the Tununk Shale reveals a hierarchy of stratal cyclicity. Application of sequence stratigraphic concepts to this thick mudstone-dominated succession provides important insights into the underlying causes of heterogeneity in these rocks over multiple thickness scales (millimetre-scale to metre-scale). The detailed sedimentological characterization of parasequences, system tracts and depositional sequences in the Tununk Shale provides conceptual approaches that can aid the development of high-resolution sequence stratigraphic frameworks in other ancient shelf mudstone successions. 相似文献
13.
《Sedimentology》2018,65(4):1097-1131
Wide carbonate platform environments developed on the western passive margin of the Tethys during the Late Triassic, after a major climate change (Carnian Pluvial Episode) that produced a crisis of high‐relief microbial carbonate platforms. The peritidal succession of this epicontinental platform (Dolomia Principale/Hauptdolomit, Dachstein Limestone) is widespread in the Mediterranean region. However, the start‐up stage is not fully understood. The original platform to basin depositional geometries of the system have been studied in the north‐eastern Southern Alps, close to the Italian/Slovenian boundary where they are exceptionally preserved. Sedimentological features have been investigated in detail by measuring several stratigraphic sections cropping out along an ideal depositional profile. The analysis of the facies architecture allowed reconstruction of the palaeoenvironments of the Dolomia Principale platform during its start‐up and early growth stages in the late Carnian. The carbonate platform was characterized by an outer platform area, connected northward to steep slopes facing a relatively deep basin. Southward, the outer platform was connected to inner sheltered environments by a narrow, often emerged shelf crest. Behind this zone, carbonate sedimentation occurred in shallow lagoons and tidal flats, passing inward to a siliciclastic mudflat. The Dolomia Principale platform was initially aggrading and able to keep pace with a concomitant sea‐level rise, and then prograding during the late Carnian. This stratigraphic interval was correlated with the Tuvalian succession of the Dolomites, allowing depiction of the depositional system on a wide scale of hundreds of kilometres. This large‐scale depositional system presents features in common with some Palaeozoic and Mesozoic carbonate build‐ups (for example, the Permian Capitan Reef complex, Anisian Latemar platform), both in terms of architecture and prevailing carbonate producers. A microbial‐dominated carbonate factory is found in the outer platform and upper slope. The recovery of high‐relief microbial carbonate platforms marks the end of the Carnian Pluvial Episode in the Tuvalian of Tethys. 相似文献
14.
H. D. SINCLAIR 《Sedimentology》1993,40(5):955-978
High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation. 相似文献
15.
Ichnofabric in the Upper Cretaceous Sego Sandstone and Anchor Mine Tongue of east-central Utah can be differentiated into two components: (1) discrete Ophiomorpha and (2) mottling and other trace fossils. The ichnofabric index method was employed to evaluate spatial variability of the ichnofabrics within depositional sequences and component systems tracts. Indices were logged for amount of bioturbation caused solely by Ophiomorpha (Oii) and that represented by all other biogenic features (Bii). Values of Oii> 1 are more pervasive in lowstand systems tracts compared to transgressive systems tracts. This is consistent with the predominance of marginal and nearshore marine, sand-dominated settings that are characteristic of lowstands, which are favourable habitats for colonization by Ophiomorpha producers. Ichnofabric index values vary both vertically and laterally within any given systems tract, reflecting differences in physical and biological parameters operating in the palaeoenvironment. These parameters include the total number and behaviours of organisms occupying the substrate, as well as substrate texture and grain size, and rates of sedimentation. The architectural style of Ophiomorpha was examined within five depositional facies: shelf, storm deposit, lower shoreface, shoreface, and estuarine. Inclinations of individual burrow elements were approximated relative to bedding planes, categorized as either vertical, inclined or horizontal, and then plotted on ternary diagrams. Based on the types of facies present, these results suggest that variations in the geometric configurations of Ophiomorpha are controlled primarily by physical energy levels, and the rate and nature of sedimentation. Results of this study have broad implications for understanding the physical factors affecting facies variability within sequences and systems tracts. When coupled with sedimentologic data, recognition of variations in the distribution of ichnofabrics and architectural style of Ophiomorpha can provide additional information useful for characterizing depositional environments, and therefore could be integrated with other basin analysis techniques to test and refine sequence stratigraphic interpretations. 相似文献
16.
Mohammad Ali Kavoosi 《Geological Journal》2016,51(4):523-544
Upper Callovian to Tithonian (late Jurassic) sediments represent an important hydrocarbon reservoir in the Kopet‐Dagh Basin, NE Iran. These deposits consist mainly of limestone, dolostone, and calcareous mudstone with subordinate siliciclastic interbeds. Detailed field surveys, lithofacies and facies analyses at three outcrop sections were used to investigate the depositional environments and sequence stratigraphy of the Middle to Upper Jurassic interval in the central and western areas of the basin. Vertical and lateral facies changes, sedimentary fabrics and structures, and geometry of carbonate bodies resulted in recognition of various carbonate facies related to tidal flats, back‐barrier lagoon, shelf‐margin/shelf‐margin reef, slope and deep‐marine facies belts. These facies were accompanied by interbedded beach and deep marine siliciclastic petrofacies. Field surveys, facies analysis, parasequences stacking patterns, discontinuity surfaces, and geometries coupled with relative depth variation, led to the recognition of six third‐order depositional sequences. The depositional history of the study areas can be divided into two main phases. These indicate platform evolution from a rimmed‐shelf to a carbonate ramp during the late Callovian–Oxfordian and Kimmeridgian–Tithonian intervals, respectively. Significant lateral and vertical facies and thickness changes, and results obtained from regional correlation of the depositional sequences, can be attributed to the combined effect of antecedent topography and differential subsidence related to local tectonics. Moreover, sea‐level changes must be regarded as a major factor during the late Callovian–Tithonian interval. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
17.
《地学前缘(英文版)》2016,(5)
This study is focused on sedimentary environments, facies distribution, and sequence stratigraphy. The facies and sequence stratigraphic analyses of the Bahram Formation(middleelate Devonian) in southcentral Iran are based on two measured stratigraphic sections in the southern Tabas block. The Bahram Formation overlies red sandstones Padeha Formation in sections Hutk and Sardar and is overlain by Carboniferous carbonate deposits of Hutk Formation paraconformably, with a thickness of 354 and386 m respectively. Mixed siliciclastic and carbonate sediments are present in this succession. The field observations and laboratory studies were used to identify 14 micro/petrofacies, which can be grouped into 5 depositional environments: shore, tidal flat, lagoon, shoal and shallow open marine. A mixed carbonate-detrital shallow shelf is suggested for the depositional environment of the Bahram Formation which deepens to the east(Sardar section) and thins in southern locations(Hutk section). Three 3rdorder cyclic siliciclastic and carbonate sequences in the Bahram Formation and one sequence shared with the overlying joint with Hutk Formation are identified, on the basis of shallowing upward patterns in the micro/pertofacies. 相似文献
18.
在层序地层学和沉积学理论指导下,以油气勘探为目标,根据岩芯观察、岩石薄片鉴定分析、测井资料、地震资料,确定珠江口盆地（东部）珠江组主要发育：（1）碎屑岩沉积体系一三角洲、滨岸和浅海相;（2）碳酸盐岩沉积体系一开阔台地、台地边缘及台地前缘斜坡相。通过暴露标志、岩性岩相组合、生物组合及测井为主的层序界面识别,将珠江组划分为4个三级层序。在此基础上,对珠江口盆地（东部）珠江组取三级层序体系域或三级层序为成图单元,进行层序岩相古地理编图,详细探讨了珠江口盆地（东部）珠江组古地理特征及演化。结合各相带储集物性特征,认为珠江组SQ1-HST、SQ2-HST及SQ3晚期形成的台缘、台内礁滩沉积是寻找有利储集层的重要储集相带。 相似文献
19.
《Journal of Asian Earth Sciences》1999,17(1-2):203-214
Fifteen percent of the exploration wells drilled in the Kutai Basin region were targeted for stratigraphic play-types. Carbonate reservoirs comprise almost 70% of the objectives in these stratigraphic plays. There was need for a better understanding of the carbonate reservoir potential in the region. Accordingly, this study was carried out. The distribution, depositional environment as well as factors controlling the quality of carbonate reservoirs are reviewed and analyzed. Carbonate reservoirs in the study area can be found sparsely throughout the Kutai Basin. Carbonates range in age from Oligocene (Bebulu limestone) to Late Miocene (Dian limestone). The main constituents of these carbonate build-ups are platy-corals, encrusting red algae and larger benthonic foraminifera. Most of the carbonates were deposited in a shallow marine environment (inner to middle shelf) during rises in relative sea level. Highstand system tracts are characterized by well-developed carbonate facies-belts. The carbonate build-ups generally occur as isolated bedded mounds, from a few feet up to 1000 ft in thickness. The preservation of primary porosity is generally poor due to diagenetic processes during burial history, particularly the infilling of pores by non-ferroan calcite cement. The development of secondary porosity is limited, due to the retardation of subsurface fluid flow by non-permeable layers, and the absence of solution effects due to sub-aerial exposure and karstification. Preserved porosities are mainly present as vugs, best developed in coarse-grained shelf-margin facies, which may not have subsequently been completely filled by calcite cement. Early hydrocarbon migration may retard the diagenetic processes and preserve the primary carbonate porosity. 相似文献
20.
黔北-川东南志留系层序格架下的沉积体系演化特征及有利区带预测 总被引：3，自引：0，他引：3
黔北—川东南志留系受加里东运动抬升剥蚀仅残留中、下统地层,通过大量钻井及野外露头资料的沉积学研究,应用层序地层学方法,划分出8个三级层序,其中下志留统龙马溪组2个（SSQ1~SSQ2）,石牛栏组或小河坝组2个（SSQ3~SSQ4）,中下志留统韩家店组4个（SSQ5~SSQ8）,识别出三角洲、陆棚、碳酸盐台地3类沉积体系,在等时地层格架中探讨了各沉积体系特征及其平面展布。通过层序地层划分对比及有利沉积相带研究,指出了两类有利储集层:一类为台地浅滩相和台地前缘斜坡相礁滩型生物灰岩、颗粒灰岩储层,主要发育于石牛栏期三级层序SSQ3和SSQ4的高位体系域,纵向上分布于石牛栏组中、上部,横向上分布于研究区南部叙永—习水—观音桥一带;另一类为浅水陆棚碎屑岩储层,主要发育于小河坝期三级层序SSQ4高水位体系域,横向上分布于南川—石柱—利川等地。 相似文献