首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Abstract— Three samples of Darwin Glass, an impact glass found in Tasmania, Australia at the edge of the Australasian tektite strewn field were dated using the 40Ar/39Ar single‐grain laser fusion technique, yielding isochron ages of 796–815 ka with an overall weighted mean of 816 ± 7 ka. These data are statistically indistinguishable from those recently reported for the Australasian tektites from Southeast Asia and Australia (761–816 ka; with a mean weighted age of 803 ± 3 ka). However, considering the compositional and textural differences and the disparity from the presumed impact crater area for Australasian tektites, Darwin Glass is more likely to have resulted from a distinct impact during the same period of time.  相似文献   

2.
Abstract— Only 2 Australasian tektites have been found in the Indian Ocean, and both are associated with surficial sediments. We collected cores from both locations where the tektites have been reported. The microtektites in these cores (and both the tektites, as reported earlier) have chemical compositions within the compositional range previously reported for Australasian tektites and microtektites. In both locations, while the tektites are occurring at the sediment/water interface, the microtektites are found buried in older horizons beneath the seafloor at stratigraphic levels, conforming to the radiometric age of the strewn field. Thus, at first glance, there appear to be 2 layers of Australasian impact ejecta in the Indian Ocean. However, the manganese nodules are associated with the tektites which, although millions of years old, are invariably resting on recent sediments. Therefore, the mechanism that retains nodules at the seafloor also seems to be operative on the tektites, thus leading to this apparent “age paradox” of tektite/microtektite distribution in the Indian Ocean, although they both belong to the same impact event.  相似文献   

3.
Abstract— We have analyzed the size, shape, composition, and spatial distribution of 6 kg of layered tektite fragments excavated from a 3 m × 3 m area near the town of Ban Huai Sai in northeast Thailand. Our analysis suggests that these fragments represent a single homogeneous mass that underwent fragmentation far in the past and has undergone little disturbance since its deposition. We have also studied the stratigraphic occurrence of layered tektites exposed in situ near the town of Ban Huai Om. Tektites were found along a disconformable paleo-erosion surface covered by recent aeolian sand, similar to other occurrences throughout Southeast Asia. This stratigraphic relationship provides little chronostratigraphic information and, thus, does not support a stratigraphic “age paradox” for the Australasian tektites. The present-day surface density of layered tektites in this area is 2 to 20 g/m2.  相似文献   

4.
It is shown that the enhanced abundance of siderophile elements and chromium in tektite-like glasses from the two impact craters of Zhamanshin and Aouelloul cannot be explained as a result of contamination of the country rock by meteorites nor, probably, comets. The pattern is, however, like that found in certain Australasian tektites, and in Ivory Coast tektites. It is concluded, in agreement with earlier suggestions by Campbell-Smith and Hey, that these craters were formed by the impact of large masses of tektite-like glass, of which the glasses which were studied are fragments. It follows that it is necessary, in considering an impact crater, to bear in mind that the projectile may have been a glass.  相似文献   

5.
Elgygytgyn crater (lat. 67–30 N, long. 172–00 E) in remote northeastern Siberia is proposed as the meteorite impact site from which the Australasian tektite strewnfield was splashed. The following points support this interpretation: 1, Elgygytgyn very likely is an impact crater and is of adequate size, 18 km across, to generate tektites; 2, the apex of the strewnfield points towards this crater; 3, the terrane is Mesozoic which fits the age of the tektite parental material from Sr/Rb data; 4, compositional and specific gravity lineations within the strewnfield are directed, in part, toward this crater; 5, the high velocity tektites, australites, are distal with respect to this crater while the low velocity tektites, splash forms and Muong Nong tektites, are proximal; 6, the loess deposits and mixed acid/basic rocks of the impact site provide a suitable subgraywacke-type source material; 7, the erosional state of Elgygytgyn suggests that its age may well be in accordance with that of the Australasian tektite event, i.e., 700,000 years.  相似文献   

6.
Abstract— Australasian microtektites were discovered in Ocean Drilling Program (ODP) Hole 1143A in the central part of the South China Sea. Unmelted ejecta were found associated with the microtektites at this site and with Australasian microtektites in Core SO95–17957–2 and ODP Hole 1144A from the central and northern part of the South China Sea, respectively. A few opaque, irregular, rounded, partly melted particles containing highly fractured mineral inclusions (generally quartz and some K feldspar) and some partially melted mineral grains, in a glassy matrix were also found in the microtektite layer. The unmelted ejecta at all three sites include abundant white, opaque grains consisting of mixtures of quartz, coesite, and stishovite, and abundant rock fragments which also contain coesite and, rarely, stishovite. This is the first time that shock‐metamorphosed rock fragments have been found in the Australasian microtektite layer. The rock fragments have major and trace element contents similar to the Australasian microtektites and tektites, except for higher volatile element contents. Assuming that the Australasian tektites and microtektites were formed from the same target material as the rock fragments, the parent material for the Australasian tektites and microtektites appears to have been a fine‐grained sedimentary deposit. Hole 1144A has the highest abundance of microtektites (number/cm2) of any known Australasian microtektite‐bearing site and may be closer to the source crater than any previously identified Australasian microtektite‐bearing site. A source crater in the vicinity of 22° N and 104° E seems to explain geographic variations in abundance of both the microtektites and the unmelted ejecta the best; however, a region extending NW into southern China and SE into the Gulf of Tonkin explains the geographic variation in abundance of microtektites and unmelted ejecta almost as well. The size of the source crater is estimated to be 43 ± 9 km based on estimated thickness of the ejecta layer at each site and distance from the proposed source. A volcanic ash layer occurs just above the Australasian microtektite layer, which some authors suggest is from a supereruption of the Toba caldera complex. We estimate that deposition of the ash occurred ?800 ka ago and that it is spread over an area of at least 3.7 times 107 km2.  相似文献   

7.
Abstract— The source crater for Australasian tektites remains to be positively identified We suggest that Tonle Sap, a roughly oval lake in south-central Cambodia, may represent the remnant of that crater. The size of the lake (about 100 km × 35 km), location (Indochina), inferred geologic age (recent), and orientation of the lake, as well as the geographical distribution of tektites, are consistent with this suggestion. The elongated shape of the lake with its long axis pointing toward Australia may be the result of an oblique impact of a NW to SE-moving object a few km in diameter. The absence of a raised rim and a central peak may be related to a low impact angle, soft target rocks, or high post-impact erosion and sedimentation rates. The scarcity of Muong Nong-type (layered) tektites near Tonle Sap may be due to extensive post-impact alluvial deposition, which buried the tektites. The chemical composition of Upper Indosinias formation sandstones from Phnom Batheay was determined. There are significant differences between the composition of indochinite tektites and these rocks, which are thus unlikely to represent tektite source rocks.  相似文献   

8.
The Fe oxidation state and coordination number of 29 impact glass spherules recently recovered from the Transantarctic Mountains (Antarctica) have been determined by X‐ray absorption near edge structure (XANES) spectroscopy. Based on geochemical, isotopic, and fission track data, these spherules are considered as microtektites from the Australasian tektite/microtektite strewn field. Their find location is the farthest so far discovered from the possible source crater region, and their alkali content is the lowest compared with other published data on Australasian microtektite glasses. The Fe3+/(Fe2++Fe3+) ratio, determined from the analysis of the pre‐edge peak energy position and integrated intensity, is below 0.1 (±0.04) for all the samples, and is comparable to that of most tektites and microtektites from the Australasian strewn field. Also, the pre‐edge peak integrated intensity, which is sensitive to the average Fe coordination geometry, is comparable to that of other Australasian microtektites reported in the literature. The agreement of the Fe oxidation state and coordination number, between the Transantarctic Mountain microtektites (TAM) and the Australasian tektites and microtektites, further confirms the impact origin of these glass spherules and provides an independent suggestion that they represent a major extension southeastward of the Australasian strewn field. The fact that similar redox conditions are observed in tektites and microtektites within the Australasian strewn field regardless of the distance from the source crater area (up to approximately 11000 km) could be an important constraint for better understanding the different processes affecting microtektite formation and transport. The fact that the Fe oxidation state of microtektites does not increase with distance, as in the case of North American microtektites, means that thermal and redox histories of Australasian and TAM microtektites could differ significantly from those of North American microtektites.  相似文献   

9.
Abstract— The Chesapeake Bay impact structure, which is about 35 Ma old, has previously been proposed as the possible source crater of the North American tektites (NAT). Here we report major and trace element data as well as the first Sr‐Nd isotope data for drill core and outcrop samples of target lithologies, crater fill breccias, and post‐impact sediments of the Chesapeake Bay impact structure. The unconsolidated sediments, Cretaceous to middle Eocene in age, have ?Srt = 35.7 Ma of +54 to +272, and ?Ndt = 35.7 Ma ranging from ?6.5 to ?10.8; one sample from the granitic basement with a TNdCHUR model age of 1.36 Ga yielded an ?Srt = 35.7 Ma of +188 and an ?Ndt = 35.7 Ma of ?5.7. The Exmore breccia (crater fill) can be explained as a mix of the measured target sediments and the granite, plus an as‐yet undetermined component. The post‐impact sediments of the Chickahominy formation have slightly higher TNdCHUR model ages of about 1.55 Ga, indicating a contribution of some older materials. Newly analyzed bediasites have the following isotope parameters: +104 to +119 (?Srt = 35.7 Ma), ?5.7 (?Ndt = 35.7 Ma), 0.47 Ga (TSrUR), and 1.15 Ga (TNdCHUR), which is in excellent agreement with previously published data for samples of the NAT strewn field. Target rocks with highly radiogenic Sr isotopic composition, as required for explaining the isotopic characteristics of Deep Sea Drilling Project (DSDP) site 612 tektites, were not among the analyzed sample suite. Based on the new isotope data, we exclude any relation between the NA tektites and the Popigai impact crater, although they have identical ages within 2s? errors. The Chesapeake Bay structure, however, is now clearly constrained as the source crater for the North American tektites, although the present data set obviously does not include all target lithologies that have contributed to the composition of the tektites.  相似文献   

10.
Abstract— Darwin glass formed by impact melting, probably during excavation of the 1.2 km diameter Darwin crater, Tasmania, Australia. The glass was ejected up to 20 km from the source crater and forms a strewn field of >400 km2. There is at least 11,250 m3of glass in the strewn field and relative to the size of the crater this is the most abundant ejected impact glass on Earth. The glass population can be subdivided on the basis of shape (74% irregular, 20% ropy, 0.5% spheroid, 6% droplet, and 0.7% elongate) and color (53% dark green, 31% light green, 11% black, and 5% white). The white glasses contain up to 92 wt% SiO2 and are formed from melting of quartzite. Black glasses contain a minimum of 76 wt% SiO2 and formed from melting of shale. Systematic variations in the proportion of glasses falling into each of the color and shape classes relative to distance from the crater show: 1) a decrease in glass abundance away from the crater; 2) the largest fragments of glass are found closest to the crater; 3) small fragments (<2 g) dominate finds close to the crater; 4) the proportion of white glass is greatest closest to the crater; 5) the proportion of black glass increases with distance from the crater and 6) the proportion of splashform glasses increases with distance from the crater. These distribution trends can only be explained by the molten glass having been ballistically ejected from Darwin crater during impact and are related to 1) the depth of excavation from the target rock stratigraphy and/or 2) viscosity contrasts between the high and low SiO2 melt. The high abundance and wide distribution of ejected melt is attributed to a volatile charged target stratigraphy produced by surface swamps that are indicated by the paleoclimate record.  相似文献   

11.
Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H2O. The H2O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H2O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H2O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO2) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO2 can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO2) can also undergo palagonitization.  相似文献   

12.
Abstract— We have analyzed fluorine and boron in nine tektites from all four strewn fields, and in a suite of impact glasses and target rocks from the Zhamanshin and Darwin impact craters, as well as Libyan Desert Glass and Aouelloul impact glass samples. Fluorine and boron are useful indicators for the volatilization and temperature history of tektites and impact glasses. Tektites from different strewn fields show a limited range of F and B contents and have F/B ratios near unity. Most splash-form tektites have lower average F and B contents than Muong Nong type tektites, which is similar to the relation between irghizites and zhamanshinites. The F and B contents in target rocks from the Zhamanshin and Darwin impact craters are similar to normal terrestrial sediments. Fluorine in impact glasses and tektites is more depleted compared to their (known or inferred) target rocks than is boron, which is caused by the higher volatility of F. The F/B ratios therefore decrease with increasing temperature of formation (suggesting that irghizites were formed at a higher temperature than zhamanshinites, and Muong Nong type tektites at a lower temperature than splash-form tektites). Mixing of local country rocks together with partial loss of the volatiles F and B can reproduce the F and B contents of impact glasses.  相似文献   

13.
The Australasian tektites are quench melt glass ejecta particles distributed over the Asian, Australian, and Antarctic regions, the source crater of which is currently elusive. New 40Ar/39Ar age data from four tektites: one each from Thailand, China, Vietnam, and Australia measured using three different instruments from two different laboratories and combined with published 40Ar/39Ar data yield a weighted mean age of 788.1 ± 2.8 ka (±3.0 ka, including all sources of uncertainties) (P = 0.54). This age is five times more precise compared to previous results thanks, in part, to the multicollection capabilities of the ARGUS VI noble gas mass spectrometer, which allows an improvement of almost fourfold on a single plateau age measurement. Diffusion experiments on tektites combined with synthetic age spectra and Monte Carlo diffusion models suggest that the minimum temperature of formation of the Thai tektite is between 2350 °C and 3950 °C, hence a strict minimum value of 2350 °C.  相似文献   

14.
Ralph B. Baldwin 《Icarus》1981,45(3):554-563
From estimates of the total masses of tektites in three strewnfields, calculations by Orphal et al. (1980) of the amount of melt that could be ejected from impact craters, and equations relating kinetic energy of impact to crater diameter, it is possible to calculate minimum diameters of lunar craters capable of ejecting the liquid masses that could have formed the various tektite strewnfields. No lunar craters of the requisite sizes have been found that are young enough to correlate with the dates of formations of the strewnfields and it seems clear that the Moon must be eliminated as a source of tektites on the Earth. It is concluded that the associations of the Ivory Coast tektites with the Bosumtwi crater and the moldavites with the Rieskessel are real and the tektites are of terrestrial origin. It follows that if the Ivory Coast tektites came from the 10.5-km-wide Bosumtwi crater, the larger masses in the Australasian and North American strewnfields came from craters 17 km in diameter and between 33 and 65 km in diameter, respectively. No crater has yet been proven to be the parent of the Australisian tektites. The large crater that formed the North American tektites may not yet have been found, although the Mistastin Lake Crater may eventually be proven to be the source.  相似文献   

15.
A possible crater representing the source of Australasian tektites is identified in northeastern Cambodia at longitude, 106° 34′E., and latitude, 13° 55′N. The crater is an incomplete oval ring of hills 10 km long and 6 km wide located near the center of the Muong Nong-type tektite strewnfield. The morphology of the structure may have been significantly changed by relatively recent erosion and deposition processes. The types of rocks in the area of the crater are consistent with the compositional requirements for the tektite source rocks. Collection of impactite material from the vicinity of the structure will be required to confirm its association with Australasian tektites.  相似文献   

16.
Abstract— We have conducted 40Ar/39Ar age dating on a sample of impact melt from the Gardnos impact structure in Norway in an attempt to better constrain the formation age of the crater. Current estimates of the age of the Gardnos crater cover a wide range and are as old as 900 Ma (Dons and Naterstad, 1992; French et al., 1997). The age spectra that we obtained from three samples are consistent with a thermal event at 385 ± 5 Ma (1σ). Because this differs greatly from the best stratigraphic age of ～600 Ma, and because the minerals present in the dated sample are a metamorphic assemblage, we believe we have not dated the formation age of the crater. Instead we have probably dated the effect of the early Devonian collapse of the late Caledonian (Scandian) orogeny on these materials (Dons and Naterstad, 1992; French et al., 1997). Although it may be possible, it will be difficult to determine the age of the impact by isotopic means alone because of this widespread metamorphism. Detailed stratigraphic analyses of the crater fill sediments may be the most promising method for constraining the crater age.  相似文献   

17.
Abstract— We have recovered 18 kg of layered tektites from 10 tektite-bearing localities in Laos and central Vietnam, including 5 localities around the town of Muong Nong (Laos). Several of these deposits originally contained several hundred kilograms of layered tektite fragments, and one fragmented mass may have been as large as 1000 kg. This is the largest single deposit of tektites yet reported. In this region, layered tektite fragments are found in isolated clusters usually associated with a pebbly laterite horizon that is 0–1 m below the surface. Near Khe Sanh, Vietnam, we estimate the abundance of layered tektite fragments to be ～100 g/m2. This is greater than five times the abundance estimated for northeast Thailand (Fiske et al., 1996). In a region that extends from northeast Thailand, through central Laos, and into central Vietnam, we found only layered tektites, which confirmed the existence of a large (>50 000 km2) subfield of the Australasian strewn field with only layered tektites. The east-west extent of the “layered-only” subfield is well constrained, but little field data exist to constrain its north-south extent.  相似文献   

18.
Abstract— A new 40Ar/39Ar data set is presented for tektites from the Central European strewn field (moldavites). This is the only strewn field that is entirely situated in a continental environment and still characterized by scattered ages (14–15.3 Myr). The main objectives of the study were to define more precisely the moldavite formation age and provide a good calibration for a glass standard proposed for fission‐track dating. The laser total fusion ages obtained on chips from 7 individual specimens from the Southern Bohemian and Moravian subfields are restricted to a narrow interval of time, with an average of 14.34 ± 0.08 Myr relative to the 27.95 ± 0.09 Myr of the Fish Canyon Tuff biotite. This result gives a more precise age not only for the tektite field but also for its producing impact. If the genetic link between the moldavites and the Nördlinger Ries impact crater is maintained, then this new age has to be considered a reliable estimate for the Ries crater also. This new value places the formation of Central European tektites within the Lower Serravallian period in the latest geologic timescales. Evidence of their impact products, such as glass spherules or shocked minerals, can, therefore, be sought in sedimentary marine formations in a more precisely defined age interval.  相似文献   

19.
Abstract— Argentine Pampean sediments represent a nearly continuous record of deposition since the late Miocene (～10 Ma). Previous studies described five localized concentrations of vesicular impact glasses from the Holocene to late Pliocene. Two more occurrences from the late Miocene are reported here: one near Chasicó (CH) with an 40Ar/39Ar age of 9.24 ± 0.09 Ma, and the other near Bahía Blanca (BB) with an age of 5.28 ± 0.04 Ma. In contrast with andesitic and dacitic impact glasses from other localities in the Pampas, the CH and BB glasses are more mafic. They also exhibit higher degrees of melting with relatively few xenoycrysts but extensive quench crystals. In addition to evidence for extreme heating (>1700 °C), shock features are observed (e.g., planar deformation features [PDFs] and diaplectic quartz and feldspar) in impact glasses from both deposits. Geochemical analyses reveal unusually high levels of Ba (～7700 ppm) in some samples, which is consistent with an interpretation that these impacts excavated marine sequences known to be at depth. These two new impact glass occurrences raise to seven the number of late Cenozoic impacts for which there is evidence preserved in the Pampean sediments. This seemingly high number of significant impacts over a 106 km2 area in a time span of 10 Myr is consistent with the number of bolides larger than 100 m expected to enter the atmosphere but is contrary to calculated survival rates following atmospheric disruption. The Pampean record suggests, therefore, that either atmospheric entry models need to be reconsidered or that the Earth has received an enhanced flux of impactors during portions of the late Cenozoic. Evidence for the resulting collisions may be best preserved and revealed in rare dissected regions of continuous, low‐energy deposition such as the Pampas. Additionally, the rare earth element (REE) concentrations of the target sediments and impact melts associated with the Chasicó event resemble the HNa/K australites of similar age. This suggests the possibility that those enigmatic tektites could have originated as high‐angle, distal ejecta from an impact in Argentina, thereby accounting for their rarity and notable chemical and physical differences from other Australasian impact glasses.  相似文献   

20.
Abstract— The Chicxulub Scientific Drilling Project (CSDP), Mexico, produced a continuous core of material from depths of 404 to 1511 m in the Yaxcopoil‐1 (Yax‐1) borehole, revealing (top to bottom) Tertiary marine sediments, polymict breccias, an impact melt unit, and one or more blocks of Cretaceous target sediments that are crosscut with impact‐generated dikes, in a region that lies between the peak ring and final crater rim. The impact melt and breccias in the Yax‐1 borehole are 100 m thick, which is approximately 1/5 the thickness of breccias and melts exposed in the Yucatán‐6 exploration hole, which is also thought to be located between the peak ring and final rim of the Chicxulub crater. The sequence and composition of impact melts and breccias are grossly similar to those in the Yucatán‐6 hole. Compared to breccias in other impact craters, the Chicxulub breccias are incredibly rich in silicate melt fragments (up to 84% versus 30 to 50%, for example, in the Ries). The melt in the Yax‐1 hole was produced largely from the silicate basement lithologies that lie beneath a 3 km‐ thick carbonate platform in the target area. Small amounts of immiscible molten carbonate were ejected with the silicate melt, and clastic carbonate often forms the matrix of the polymict breccias. The melt unit appears to have been deposited while molten but brecciated after solidification. The melt fragments in the polymict breccias appear to have solidified in flight, before deposition, and fractured during transport and deposition.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号