首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The tephra fallout from the 12–15 August 1991 explosive eruption of Hudson volcano (Cordillera de los Andes, 45°54 S-72°58 W; Chile) was dispersed on a narrow, elongated ESE sector of Patagonia, covering an area (on land) of more than 100 000 km2. The elongated shape of the deposit, together with the relatively coarse mean and median values of the particles at a considerable distance from the vent, were the result of strong winds blowing to the southeast during the eruption. The thickness of the fall deposit decreases up to 250 km ESE from Hudson volcano, where it begins to thicken again. Secondary maxima are well developed at approximately 500 km from the vent. Secondary maxima, together with grainsize bimodality in individual layers and in the bulk deposit suggest that particle aggregation played an important role in tephra sedimentation. The fallout deposit is well stratified, with alternating fine-grained and coarsegrained layers, which is probably a result of strong eruptive pulses followed by relatively calm periods and/or changes in the eruptive style from plinian to phreatoplinian. The tephra is mostly composed of juvenile material: the coarse mode (mostly pumice) shifts to finer sizes with distance from the volcano; the fine mode (mostly glass shards) is always about 5/6 phi. Glass shards and pumice are mostly light gray to colorless. However, considerable amounts of dark, poorly vesiculated, blocky shards, suggest a hydromagmatic component in the eruption. A land-based tephra volume of 4.35 km3 was estimated, and a total volume of 7.6 km3 arose from an extrapolation, which took into account the probable volume sedimented in the sea. Bulk density ranges from 0.9 to 1.10 gr/cm3 (beyond 110 km from the vent). Rather uniform density values measured in crushed samples (2.45–2.50 gr/cm3 at all distances from the vent) reveal a relatively homogeneous composition. Mean and median sizes decrease rapidly up to 270 km from the vent; beyond that point they are more or less constant, whereas the maximum size (1 phi) shows a steady decrease up to 550 km. A concomitant improvement in sorting is observed. This is attributed to sorting due to wind transport combined with particle aggregation at different times and distances from the vent. The Hudson tephra fallout shares some strikingly similar features with the Mount St. Helens (18 May 1980) and Quizapu (1932) eruptions.  相似文献   

2.
The violent August 16–17, 2006 Tungurahua eruption in Ecuador witnessed the emplacement of numerous scoria flows and the deposition of a widespread tephra layer west of the volcano. We assess the size of the eruption by determining a bulk tephra volume in the range 42–57 × 106 m3, which supports a Volcanic Explosivity Index 3 event, consistent with calculated column height of 16–18 km above the vent and making it the strongest eruptive phase since the volcano’s magmatic reactivation in 1999. Isopachs west of the volcano are sub-bilobate in shape, while sieve and laser diffraction grain-size analyses of tephra samples reveal strongly bimodal distributions. Based on a new grain-size deconvolution algorithm and extended sampling area, we propose here a mechanism to account for the bimodal grain-size distribution. The deconvolution procedure allows us to identify two particle subpopulations in the deposit with distinct characteristics that indicate dissimilar transport-depositional processes. The log-normal coarse-grained subpopulation is typical of particles transported downwind by the main volcanic plume. The positively skewed, fine-grained subpopulation in the tephra fall layer shares close similarities with the elutriated co-pyroclastic flow ash cloud layers preserved on top of the scoria flow deposits. The area with the higher fine particle content in the tephra layer coincides with the downwind prolongation of the pyroclastic flow deposits. These results indicate that the bimodal distribution of grain size in the Tungurahua fall deposit results from synchronous deposition of lapilli from the main plume and fine ash elutriated from scoria flows emplaced on the western flank of the volcano. Our study also reveals that inappropriate grain-size data processing may produce misleading determination of eruptive type.  相似文献   

3.
Explosive eruptions associated with tephra deposits that are only exposed in proximal areas are difficult to characterize. In fact, the determination of physical parameters such as column height, mass eruption rate, erupted volume, and eruption duration is mainly based on empirical models and is therefore very sensitive to the quality of the field data collected. We have applied and compared different modeling approaches for the characterization of the two main tephra deposits, the Lower Pumice (LP) and Upper Pumice (UP) of Nisyros volcano, Greece, which are exposed only within 5 km of the probable vent. Isopach and isopleth maps were compiled for two possible vent locations (on the north and on the south rim of the caldera), and different models were applied to calculate the column height, the erupted volume, and the mass eruption rate. We found a column height of about 15 km above sea level and a mass eruption rate of about 2 × 107 kg/s for both eruptions regardless of the vent location considered. In contrast, the associated wind velocity for both UP and LP varied between 0 and 20 m/s for the north and south vent, respectively. The derived erupted volume for the south vent (considered as the best vent location) ranges between 2 and 27 × 108 m3 for the LP and between 1 and 5 × 108 m3 for the UP based on the application of four different methods (integration of exponential fit based on one isopach line, integration of exponential and power-law fit based on two isopach lines, and an inversion technique combined with an advection–diffusion model). The eruption that produced the UP could be classified as subplinian. Discrepancies associated with different vent locations are smaller than the discrepancies associated with the use of different models for the determination of erupted mass, plume height, and mass eruption rate. Proximal outcrops are predominantly coarse grained with ≥90 wt% of the clasts ranging between −6ϕ and 0ϕ. The associated total grainsize distribution is considered to result from a combination of turbulent fallout from both the plume margins and the umbrella region, and as a result, it is fines-depleted. Given that primary deposit thickness observed on Nisyros for both LP and UP is between 1 and 8 m, if an event of similar scale were to happen again, it would have a significant impact on the entire island with major damage to infrastructure, agriculture, and tourism. Neighboring islands and the continent could also be significantly affected.  相似文献   

4.
The Southeast Crater (SEC) of Mt. Etna, Italy, is renowned for its high activity, mainly long-lived eruptions consisting of sequences of individual paroxysmal episodes which have produced more than 150 eruptive events since 1998. Each episode typically forms eruption columns followed by tephra fallout over distances of up to about 100 km from the vent. One of the last sequences consisted of 25 lava fountaining events, which took place between January 2011 and April 2012 from a pit-vent on the eastern flank of the SEC and built a new scoria cone renamed New Southeast Crater. The first episode on 12–13 January 2011 produced tephra fallout which was unusually dispersed toward to the South extending out over the Mediterranean Sea. The southerly deposition of tephra permitted an extensive survey at distances between ~1 and ~100 km, providing an excellent characterization of the tephra deposit. Here, we document the stratigraphy of the 12–13 January fallout deposit, draw its dispersal, and reconstruct its isopleth map. These data are then used to estimate the main eruption source parameters. The total erupted mass (TEM) was calculated by using four different methodologies which give a mean value of 1.5?±?0.4?×?108 kg. The mass eruption rate (MER) is 2.5?±?0.7?×?104 kg/s using eruption duration of 100 min. The total grain-size (TGS) distribution, peaked at ?3 phi, ranges between ?5 and 5 phi and has a median value of ?1.4 phi. Further, for the eruption column height, we obtained respective values of 6.8–13.8 km by using the method of Carey and Sparks (1986) and 3.4?±?0.3 km by using the methods of Wilson and Walker (1987), Mastin et al. (2009), and Pistolesi et al. (2011) and considering the mean value of MER from the deposit. We also evaluated the uncertainty and reliability of TEM and TGS for scenarios where the proximal and distal samples are not obtainable. This is achieved by only using a sector spanning the downwind distances between 6 and 23 km. This scenario is typical for Etna when the tephra plume is dispersed eastward, i.e., in the prevailing wind direction. Our results show that, if the analyzed deposit has poorer sample coverage than presented in this study, the TEM (3.4?×?107 kg) is 22 % than the TEM obtained from the whole deposit. The lack of the proximal (<6 km) deposit may cause more significant differences in the TGS estimations.  相似文献   

5.
Constraining physical parameters of tephra dispersion and deposition from explosive volcanic eruptions is a significant challenge, because of both the complexity of the relationship between tephra distribution and distance from the vent and the difficulties associated with direct and comprehensive real-time observations. Three andesitic subplinian explosions in January 2011 at Shinmoedake volcano, Japan, are used as a case study to validate selected empirical and theoretical models using observations and field data. Tephra volumes are estimated using relationships between dispersal area and tephra thickness or mass/area. A new cubic B-spline interpolation method is also examined. Magma discharge rate is estimated using theoretical plume models incorporating the effect of wind. Results are consistent with observed plume heights (6.4–7.3 km above the vent) and eruption durations. Estimated tephra volumes were 15–34?×?106 m3 for explosions on the afternoon of 26 January and morning of 27 January, and 5.0–7.6?×?106 m3 for the afternoon of 27 January; magma discharge rates were in the range 1–2?×?106 kg/s for all three explosions. Clast dispersal models estimated plume height at 7.1?±?1 km above the vent for each explosion. The three subplinian explosions occurred with approximately 12-h reposes and had similar mass discharge rates and plume heights but decreasing erupted magma volumes and durations.  相似文献   

6.
An extremely large magnitude eruption of the Ebisutoge-Fukuda tephra, close to the Plio-Pleistocene boundary, central Japan, spread volcanic materials widely more than 290,000 km2 reaching more than 300 km from the probable source. Characteristics of the distal air-fall ash (>150 km away from the vent) and proximal pyroclastic deposits are clarified to constrain the eruptive style, history, and magnitude of the Ebisutoge-Fukuda eruption.Eruptive history had five phases. Phase 1 is phreatoplinian eruption producing >105 km3 of volcanic materials. Phases 2 and 3 are plinian eruption and transition to pyroclastic flow. Plinian activity also occurred in phase 4, which ejected conspicuous obsidian fragments to the distal locations. In phase 5, collapse of eruption column triggered by phase 4, generated large pyroclastic flow in all directions and resulted in more than 250–350 km3 of deposits. Thus, the total volume of this tephra amounts over 380–490 km3. This indicates that the Volcanic Explosivity Index (VEI) of the Ebisutoge-Fukuda tephra is greater than 7. The huge thickness of reworked volcaniclastic deposits overlying the fall units also attests to the tremendous volume of eruptive materials of this tephra.Numerous ancient tephra layers with large volume have been reported worldwide, but sources and eruptive history are often unknown and difficult to determine. Comparison of distal air-fall ashes with proximal pyroclastic deposits revealed eruption style, history and magnitude of the Ebisutoge-Fukuda tephra. Hence, recognition of the Ebisutoge-Fukuda tephra, is useful for understanding the volcanic activity during the Pliocene to Pleistocene, is important as a boundary marker bed, and can be used to interpret the global environmental and climatic impact of large magnitude eruptions in the past.  相似文献   

7.
Most tephra fallout models rely on the advection–diffusion equation to forecast sedimentation and hence volcanic hazards. Here, we test the application of the advection–diffusion equation to tephra sedimentation using data collected on the proximal (350 to ~1,200?m from the vent) to medial (greater than ~1,200?m from the vent) tephra blanket of a basaltic cinder cone, Cerro Negro volcano, located in Nicaragua. Our understanding of tephra depositional processes at this volcano is significantly improved by combination of sample pit data in the medial zone and high-resolution ground-penetrating radar (GPR) data collected in the near vent and proximal zones. If the advection–diffusion equation applies, then the thickness of individual tephra deposits should have Gaussian crosswind profiles and exponential decay with distance away from the vent. At Cerro Negro, steady trade winds coupled with brief eruptions of relatively low energy (VEI 2–3) create relatively simple deposits. GPR data were collected along three crosswind profiles at distances of 700–1,600?m from the vent; sample pits were used to estimate thickness of the 1992 tephra deposit up to 13?km from the vent. Horizons identified in proximal GPR profiles exhibit Gaussian distributions with a high degree of statistical confidence, with diffusion coefficients of ~500?m2?s?1 estimated for the deposits, confirming that the advection–diffusion equation is capable of modeling sedimentation in the proximal zone. The thinning trend downwind of the vent decreases exponentially from the cone base (350?m) to ~1,200?m from the vent. Beyond this distance, deposit overthickening occurs, identified in both GPR and sample pit datasets. The combined data reveal three depositional regimes: (1) a near-vent region on the cone itself, where fallout remobilizes in granular flows upon deposition; (2) a proximal zone in which particles fall from a height of less than ~2?km; and (3) a medial zone, in which particles fall from ~4 to 7?km and the deposit is thicker than expected based on thinning trends observed in the proximal zone of the deposit. This overthickening of the tephra blanket, defining the transition from proximal to medial depositional facies, is indicative of transition from sedimentation dominated by fallout from plume margins to that dominated by fallout from the buoyant eruption cloud—a feature of deposits previously identified in larger-volume eruptions. We interpret this change to represent a change in diffusion law, occurring at total particle fall times (the fall time threshold of numerical models) of ~400?s. Thus, the detailed GPR profiles and pit data collected at Cerro Negro help to validate current numerical models of tephra sedimentation.  相似文献   

8.
Acid rain and ongoing eruptive activity at Rincón de la Vieja volcano in northwestern Costa Rica have created a triangular, deeply eroded “dead zone” west-southwest of the Active Crater. The barren, steep-walled canyons in this area expose one of the best internal stratigraphic profiles of any active or dormant volcano in Costa Rica. Geologic mapping along the southwestern flank of the volcano reveals over 300 m of prehistoric volcanic stratigraphy, dominated by tephra deposits and two-pyroxene andesite lavas. Dense tropical forests and poor access preclude mapping elsewhere on the volcano. In the “dead zone” four stratigraphic groups are distinguished by their relative proportions of lava and tephra. In general, early volcanism was dominated by voluminous lava emissions, with explosive plinian eruptions becoming increasingly more dominant with time. Numerous phreatic eruptions have occurred in historic times, all emanating from the Active Crater. The stratigraphic sequence is capped by the Río Blanco tephra deposit, erupted at approximately 3500 yr B.P. Approximately 0.25 km3 (0.1 km3 DRE) of tephra was deposited in a highly asymmetrical dispersal pattern west-southwest of the source vent, indicating strong prevailing winds from the east and east-northeast at the time of the eruption. Grain-size studies of the deposit reveal that the eruption was subplinian, attaining an estimated column height of 16 km. A qualitative hazards assessment at Rincón de la Vieja indicates that future eruptions are likely to be explosive in style, with the zone of greatest hazard extending several kilometers north from the Active Crater.  相似文献   

9.
 The subaqueous phases of an eruption initiated approximately 85 m beneath the surface of Pleistocene Lake Bonneville produced a broad mound of tephra. A variety of distinctive lithofacies allows reconstruction of the eruptive and depositional processes active prior to emergence of the volcano above lake level. At the base of the volcano and very near inferred vent sites are fines-poor, well-bedded, broadly scoured beds of sideromelane tephra having local very low-angle cross-stratification (M1 lithofacies). These beds grade upward into lithofacies M3, which shows progressively better developed dunes and cross-stratification upsection to its uppermost exposure approximately 10 m below syneruptive lake level. Both lithofacies were emplaced largely by traction from relatively dilute sediment gravity flows generated during eruption. Intercalated lithofacies are weakly bedded tuff and breccia (M2), and nearly structureless units with coarse basal layers above strongly erosional contacts (M4). The former combines products of deposition from direct fall and moderate concentration sediment gravity flows, and the latter from progressively aggrading high-concentration sediment gravity flows. Early in the eruption subaqueous tephra jetting from phreatomagmatic explosions discontinuously fed inhomogeneous, unsteady, dilute density currents which produced the M1 lithofacies near the vent. Dunes and crossbeds which are better developed upward in M3 resulted from interaction between sediment gravity flows and surface waves triggered as the explosion-generated pressure waves and eruption jets impinged upon and occasionally breached the surface. Intermingling of (a) tephra emplaced after brief transport by tephra jets within a gaseous milieu and (b) laterally flowing tephra formed lithofacies M2 along vent margins during parts of the eruption in which episodes of continuous uprush produced localized water-exclusion zones above a vent. M4 comprises mass flow deposits formed by disruption and remobilization of mound tephra. Intermittent, explosive magma–water interactions occurred from the outset of the Pahvant eruption, with condensation, entrainment of water and lateral flow marking the transformation from eruptive to "sedimentary" processes leading to deposition of the mound lithofacies. Received: 10 October 1995 / Accepted: 18 April 1996  相似文献   

10.
Quantitative hazard assessments of active volcanoes require an accurate knowledge of the past eruptive activity in terms of eruption dynamics and the stratified products of eruption. Teide–Pico Viejo (TPV) is one of the largest volcanic complexes in Europe, but the associated eruptive history has only been constrained based on very general stratigraphic and geochronological data. In particular, recent studies have shown that explosive activity has been significantly more frequently common than previously thought. Our study contributes to characterization of explosive activity of TPV by describing for the first time the subplinian eruption of El Boquerón (5,660?yBP), a satellite dome located on the northern slope of the Pico Viejo stratovolcano. Stratigraphic data suggest complex shifting from effusive phases with lava flows to highly explosive phase that generated a relatively thick and widespread pumice fallout deposit. This explosive phase is classified as a subplinian eruption of VEI 3 that lasted for about 9–15?h and produced a plume with a height of up to 9?km above sea level (i.e. 7?km above the vent; MER of 6.9–8.2?×?105?kg/s). The tephra deposit (minimum bulk volume of 4–6?×?107?m3) was dispersed to the NE by up to 10?m/s winds. A similar eruption today would significantly impact the economy of Tenerife (e.g. tourism and aviation), with major consequences mainly for the communities around the Icod Valley, and to a minor extent, the Orotava Valley. This vulnerability shows that a better knowledge of the past explosive history of TPV and an accurate estimate of future potentials to generate violent eruptions is required in order to quantify and mitigate the associated volcanic risk.  相似文献   

11.
  相似文献   

12.
On May 1st 2008 Mount Chaitén (southern Chile) interrupted a long period of quiescence, generating a sequence of explosive eruptions and causing the evacuation of Chaitén town located a few kilometers south of the volcano. The activity was characterized by several explosive events each associated with plumes which reached up to about 19 km above sea level. The products were dispersed across a wide area, with the finest ash reaching the Atlantic coast of Argentina. Our field observations in the proximal-medial area (3–25 km from the vent) indicate that the May 2008 tephra deposit consists of numerous layers, most of which can be correlated with individual eruptive events. These layers vary from extremely fine-grained ash to layers of lapilli and blocks, composed of both juvenile and lithic material. Here we describe the stratigraphy and physical characteristics of the May 2008 deposits, and propose a reconstruction of the timing of the May 2008 events. The deposits are mainly associated with the three main explosive phases which occurred on 1st–2nd May, 3rd–5th May and 6th May, with an estimated bulk tephra volume of 0.5–1.0 km3 (integration of both exponential and power-law fitting). For the 6th May event, represented by a layer composed mainly of lithic lapilli and blocks (>2 mm), an isopleth map was compiled from which a 19 km plume height was determined, which is in good agreement with satellite observations.  相似文献   

13.
The eruption of Toba (75,000 years BP), Sumatra, is the largest magnitude eruption documented from the Quaternary. The eruption produced the largest-known caldera the dimensions of which are 100 × 30 km and which is surrounded by rhyolitic ignimbrite covering an area of over 20,000 km2. The associated deep-sea tephra layer is found in piston cores in the north-eastern Indian Ocean covering a minimum area of 5 × 106 km2. We have investigated the thickness, grain size and texture of the Toba deep-sea tephra layer in order to demonstrate the use of deep-sea tephra layers as a volcanological tool. The exceptional magnitude and intensity of the Toba eruption is demonstrated by comparison of these data with the deep-sea tephra layers associated with the eruptions of the Campanian ignimbrite, Italy and of Santorini, Greece in Minoan time. The volume of ignimbrite and distal tephra fall deposit produced in the Toba eruption are comparable, a total of at least 1000 km3 of dense rhyolitic magma. In contrast the volume of dense magma produced by the Campanian and Santorini eruptions are approximately 70 and 13 km3 respectively. Thickness versus distance data on the three deep-sea tephra layers show that eruptions of smaller magnitude than Santorini are unlikely to be preserved as distinct tephra layers in most deep-sea cores. In proximal cores all three tephra layers show two distinct units: a lower coarse-grained unit and an upper fine-grained unit. We interpret the lower unit as a plinian deposit and the upper unit as a co-ignimbrite ash-fall deposit, indicating two major eruptive phases. The Toba tephra layer is coarser both in maximum and median grain size than the Campanian and Santorini layers at a given distance from source. These data are interpreted to indicate a very high cruption column, estimated to be at least 45 km. We have applied a method for estimating the duration of the Toba eruption from the style of graded-bedding in deep-sea tephra layers. Studies of two cores yield estimates of 9 and 14 days. The eruption column height and duration estimates both indicate an average volume discharge rate of approximately 106 m3/sec. The Toba eruption therefore was not only of exceptional magnitude, but also of exceptional intensity.  相似文献   

14.
The Croscat pyroclastic succession has been analysed to investigate the transition between different eruptive styles in basaltic monogenetic volcanoes, with particular emphasis on the role of phreatomagmatism in triggering Violent Strombolian eruptions. Croscat volcano, an 11 ka basaltic complex scoria cone in the Quaternary Garrotxa Volcanic Field (GVF) shows pyroclastic deposits related both to magmatic and phreatomagmatic explosions.Lithofacies analysis, grain size distribution, chemical composition, glass shard morphologies, vesicularity, bubble-number density and crystallinity of the Croscat pyroclastic succession have been used to characterize the different eruptive styles. Eruptions at Croscat began with fissural Hawaiian-type fountaining that rapidly changed to eruption types transitional between Hawaiian and Strombolian from a central vent. A first phreatomagmatic phase occurred by the interaction between magma and water from a shallow aquifer system at the waning of the Hawaiian- and Strombolian-types stage. A Violent Strombolian explosion then occurred, producing a widespread (8 km2), voluminous tephra blanket. The related deposits are characterized by the presence of wood-shaped, highly vesicular scoriae. Glass-bearing xenoliths (buchites) are also present within the deposit. At the waning of the Violent Strombolian phase a second phreatomagmatic phase occurred, producing a second voluminous deposit dispersed over 8.4 km2. The eruption ended with a lava flow emission and consequent breaching of the western-side of the volcano. Our data suggest that the Croscat Violent Strombolian phase was related to the ascent of deeper, crystal-poor, highly vesicular magma under fast decompression rate. Particles and vesicles elongation and brittle failure observed in the wood-shaped clasts indicate that fragmentation during Violent Strombolian phase was enhanced by high strain-rate of the magma within the conduit.  相似文献   

15.
After decades of repose, Puyehue-Cordón Caulle Volcano (Chile) erupted in June 2011 following a month of continuously increasing seismic activity. The eruption dispersed a large volume of rhyolitic tephra over a wide area and was characterized by complex dynamics. During the initial climactic phase of the eruption (24–30 h on 4–5 June), 11–14-km-high plumes dispersed most of the erupted tephra eastward towards Argentina, reaching as far as the Atlantic Ocean. This first eruptive phase was followed by activity of lower intensity, leading to the development of a complex stratigraphic sequence, mainly due to rapid shifts in wind direction and eruptive style. The resulting tephra deposits consist of 13 main layers grouped into four units. Each layer was characterized based on its dispersal direction, sedimentological features, and on the main characteristics of the juvenile fraction (texture, density, petrography, chemistry). The lowest part of the eruptive sequence (Unit I), corresponding to the tephra emitted between 4 and 5 June, is composed of alternating lapilli layers with a total estimated volume of ca. 0.75 km3; these layers record the highest intensity phase, during which a bent-over plume dispersed tephra towards the southeast-east, with negligible up-wind sedimentation. Products emitted during 5–6 June (Unit II) signaled an abrupt shift in wind direction towards the north, leading to the deposition of a coarse ash deposit in the northern sector (ca. 0.21 km3 in volume), followed by a resumption of easterly directed winds. A third phase (Unit III) began on 7 June and resulted in tephra deposits in the eastern sector and ballistic bombs around the vent area. A final phase (Unit IV) started after 15 June and was characterized by the emission of fine-grained white tephra from ash-charged plumes during low-level activity and the extrusion of a viscous lava flow. Timing and duration of the first eruptive phases were constrained based on comparison of the dispersal of the main tephra layers with satellite images, showing that most of the tephra was emitted during the first 72 h of the event. The analyzed juvenile material tightly clusters within the rhyolitic field, with negligible chemical variations through the eruptive sequence. Textural observations reveal that changes in eruption intensity (and consequently in magma ascent velocity within the conduit) and complex interactions between gas-rich and gas-depleted magma portions during ascent resulted in vesicular clasts with variable degrees of shear localization, and possibly in the large heterogeneity of the juvenile material.  相似文献   

16.
We studied the distribution of tephra deposits discharged by the basaltic (52–54% SiO2) explosive eruption of 1973 on Tyatya Volcano (Kunashir I., Kuril Islands). We made maps showing lines of equal tephra thickness (isopachs) and lines of maximum size of pyroclastic particles (isopleths). These data were used to find the parameters of explosive activity using the standard techniques for each of the two phases of this eruption separately. The first, phreatomagmatic, phase discharged 0.008 km3 of tephra during the generation of maars on the volcano’s northern slope. The tephra mostly consisted of fragmented host rocks with admixtures of fragments of low vesiculated juvenile basalt. The phase lasted 20 hours, the rate of pyroclastic discharge was 2 × 105 kg/s; the eruptive plume reached heights of 4–6 km with wind speeds within 10 m/s. The second, magmatic, phase discharged 0.07 km3 of tephra during the generation of the Otvazhnyi scoria cone on the volcano’s southeastern slope. The tephra mostly consisted of juvenile basaltic scoria. The highly explosive Plinian part of this phase lasted 36 hours, the rate of pyroclastic discharge was 8 × 105 kg/s; the eruptive plume reached heights of 6–8 km with wind speeds of 10–20 m/s. The total tephra volume discharged by the eruption was approximately 0.08 km3; the total amount of ejected pyroclastic material (including the resulting monogenic edifices) was 0.11 km3; the volume of erupted magma was 0.05 km3 (the conversion was based on 2800 kg/m3 density); the volcanic explosivity index, or VEI, was 3. The production rate of the Tyatya plumbing system is estimated as 3 × 105 m3 magma per annum.  相似文献   

17.
The distribution of clasts deposited around a volcano during an explosive eruption typically contoured by isopleth maps provides important insights into the associated plume height, wind speed and eruptive style. Nonetheless, a wide range of strategies exists to determine the largest clasts, which can lead to very different results with obvious implications for the characterization of eruptive behaviour of active volcanoes. The IAVCEI Commission on Tephra Hazard Modelling has carried out a dedicated exercise to assess the influence of various strategies on the determination of the largest clasts. Suggestions on the selection of sampling area, collection strategy, choice of clast typologies and clast characterization (i.e. axis measurement and averaging technique) are given, mostly based on a thorough investigation of two outcrops of a Plinian tephra deposit from Cotopaxi volcano (Ecuador) located at different distances from the vent. These include: (1) sampling on a flat paleotopography far from significant slopes to minimize remobilization effects; (2) sampling on specified-horizontal-area sections (with the statistically representative sampling area depending on the outcrop grain size and lithic content); (3) clast characterization based on the geometric mean of its three orthogonal axes with the approximation of the minimum ellipsoid (lithic fragments are better than pumice clasts when present); and (4) use of the method of the 50th percentile of a sample of 20 clasts as the best way to assess the largest clasts. It is also suggested that all data collected for the construction of isopleth maps be made available to the community through the use of a standardized data collection template, to assess the applicability of the new proposed strategy on a large number of deposits and to build a large dataset for the future development and refinement of dispersal models.  相似文献   

18.
Models are presented for the cooling of tephra during fallout from explosive eruption columns. All tephra particles are assumed to be spherical and heat loss is considered to occur by radiation and forced convection. Grainsize is the most important control on the cooling. Clasts larger than 25 cm diameter suffer little heat loss, whereas clasts smaller than 1.6 cm diameter are completely cold on deposition. Large clasts form a well-developed chilled margin during fallout and a breadcrust texture can result if vesiculation of the hot interior occurs. The results of these calculations are combined with a model for fallout from the margins of an eruption column to predict the proximal temperature variation with distance from the vent in the deposits. Temperatures high enough for dense welding in proximal fallout deposits can extend from a few hundred metres to nearly 2 km. Extent of the welded facies increases with column height, mean grainsize and magmatic temperature. Welded fallout deposits are only predicted to occur for high temperature silicic and intermediate magmas with temperatures >850°C. These predictions are in good agreement with observations, in that welded fallout deposits have only been documented in high temperature dacites, rhyolites and panellerites. A postulated fallout origin for welded rocks that can be traced significantly further than 2 km from vent must be suspect.  相似文献   

19.
  相似文献   

20.
Two extensive marine tephra layers recovered by piston coring in the western equatorial Atlantic and eastern Caribbean have been correlated by electron microprobe analyses of glass shards and mineral phases to the Pleistocene Roseau tuff on Dominica in the Lesser Antilles arc. Tephra deposition and transport to the deep sea was primarily controlled by two processes related to two different styles of eruptive activity: a plinian airfall phase and a pyroclastic flow phase. A plinian phase produced a relatively thin (1–8 cm) airfall ash layer in the western Atlantic, covering an area of 3.0 × 105 km2 with a volume of 13 km3 (tephra). The majority of the airfall tephra was transported by antitrade winds at altitudes of 6–17 km. Aeolian fractionation of crystals and glass occurred during transport resulting in an airfall deposit enriched in crystals relative to the source. Mass balance calculation based on crystal/glass fractionation indicates an additional 12 km3 of airfall tephra was deposited outside the observed fall-out envelope as dispersed ash.Discharge of pyroclastic flows into the sea along the west coast of Dominica initiated subaqueous pyroclastic debris flows which descended the steep western submarine flanks of the island. 30 km3 of tephra were deposited by this process on the floor of the Grenada Basin up to 250 km from source. The Roseau event represents the largest explosive eruption in the Lesser Antilles in the last 200,000 years and illustrates the complexity of primary volcanogenic sedimentation associated with a major explosive eruption within an island arc environment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号