共查询到20条相似文献，搜索用时 15 毫秒
1.
Steven G. Wallenhorst 《Solar physics》1982,79(2):333-341
Models of the solar corona which include the effects of hot downflowing material are considered. Temperature-height profiles of the quiet and flaring corona are derived, under the assumptions of hydrostatic equilibrium and that the dominant cause of transition region heating is due to the enthalpy of the downflowing matter. In addition, scaling laws for the lengths of coronal loops are derived. It is found that inclusion of the downward enthalpy flux leads to a loop scaling law for quiet Sun loops which does not differ appreciably from that of Rosner et al. (1978). However, inclusion of the effects of enthalpy flux lead to a scaling law for compact flare loops of L = (3.6 × 109)T
infc
sup0.55
cm, which predicts much smaller loop sizes than expected from the quiet Sun loop law; these predicted lengths, however, are in agreement with the observed small sizes of compact flare loops. 相似文献
2.
Markus J. Aschwanden Jong Kwan Lee G. Allen Gary Michael Smith Bernd Inhester 《Solar physics》2008,248(2):359-377
The three-dimensional (3D) modeling of coronal loops and filaments requires algorithms that automatically trace curvilinear
features in solar EUV or soft X-ray images. We compare five existing algorithms that have been developed and customized to
trace curvilinear features in solar images: i) the oriented-connectivity method (OCM), which is an extension of the Strous pixel-labeling algorithm (developed by Lee,
Newman, and Gary); ii) the dynamic aperture-based loop-segmentation method (developed by Lee, Newman, and Gary); iii) unbiased detection of curvilinear structures (developed by Steger, Raghupathy, and Smith); iv) the oriented-direction method (developed by Aschwanden); and v) ridge detection by automated scaling (developed by Inhester). We test the five existing numerical codes with a TRACE image
that shows a bipolar active region and contains over 100 discernable loops. We evaluate the performance of the five codes
by comparing the cumulative distribution of loop lengths, the median and maximum loop length, the completeness or detection
efficiency, the accuracy, and flux sensitivity. These algorithms are useful for the reconstruction of the 3D geometry of coronal
loops from stereoscopic observations with the STEREO spacecraft, or for quantitative comparisons of observed EUV loop geometries
with (nonlinear force-free) magnetic field extrapolation models. 相似文献
3.
The temperature and density structure are computed for a comprehensive set of coronal loops that are in hydrostatic and thermal equilibrium. The effect of gravity is to produce significant deviations from the usual uniform-pressure scaling law (T(pL)
1/3) when the loops are taller than a scale height. For thermally isolated loops it lowers the pressure throughout the loop, which in turn lowers the density significantly and also the temperature slightly; this modifies the above scaling law considerably. For more general loops, where the base conductive flux does not vanish, gravity lowers the summit pressure and so makes the radiation decrease by more than the heating. This in turn raises the temperature above its uniform pressure value for loops of moderate length but lowers it for longer loops. A divergence in loop cross-section increases the summit temperature by typically a factor of 2, and decreases the density, while an increase in loop height (for constant loop length) changes the temperature very little but can halve the density.One feature of the results is a lack of equilibrium when the loop pressure becomes too large. This may explain the presence of cool cores in loops which originally had temperatures below 2 × 106 K. Loops hotter than 2 × 106 K are not expected to develop cool cores because the pressure necessary to produce non-equilibrium is larger than observed. 相似文献
4.
We investigate the limits of applicability of the Spitzer-Harm thermal conductivity in solar coronal loops and show that the ratio 0
/L
T
of electron mean-free path to temperature scale height in large-scale structures can approach the limits of the Spitzer-Harm theory. We use a non-local formulation of heat transport to compute a grid of loop models: the effects of non-local transport on the distribution of differential emission measure are particularly important in the coronal part of loops longer than the pressure scale height s
p
.We derive a scaling law for 0/L
T
in the corona, showing that it grows exponentially with L/s
p
, and discuss effects of non-local heat transport in the transition region.Now at Osservatorio Astrofisico di Catania, Italy. 相似文献
5.
A coronal magnetic arcade can be thought of as consisting of an assembly of coronal loops. By solving equations of isobaric thermal equilibrium along each loop and assuming a base temperature of 2 × 104 K, the thermal structure of the arcade can be found. The possible thermal equilibria can be shown to depend on two parameters L
*
p
* and h
*/p
* representing the ratios of cooling (radiation) to condu and heating to cooling, respectively. Arcades can contain four types of loops: hot loops with summits hotter than 400000 K; cool loops at temperatures less than 80000 K along their lengths; hot-cool loops with cool summits and cool footpoints but hotter intermediate portions; and warm loops, cooler than 80000 K along most of their lengths but with summits as hot as 400000 K. Two possibilities for coronal heating are considered, namely a heating that is independent of magnetic field and a heating that is proportional to the square of the local magnetic field. When the arcade is sheared the thermal structure of the arcade may change, leading in some cases to non-equilibrium or in other cases to the formation of a cool core. 相似文献
6.
Slow-mode shocks produced by reconnection in the corona can provide the thermal energy necessary to sustain flare loops for many hours. These slow shocks have a complex structure because strong thermal conduction along field lines dissociates the shocks into conduction fronts and isothermal subshocks. Heat conducted along field lines mapping from the subshocks to the chromosphere ablates chromospheric plasma and thereby creates the hot flare loops and associated flare ribbons. Here we combine a non-coplanar compressible reconnection theory with simple scaling arguments for ablation and radiative cooling, and predict average properties of hot and cool flare loops as a function of the coronal vector magnetic field. For a coronal field strength of 100 G the temperature of the hot flare loops decreases from 1.2 × 107 K to 4.0 × 106 K as the component of the coronal magnetic field perpendicular to the plane of the loops increases from 0% to 86% of the total field. When the perpendicular component exceeds 86% of the total field or when the altitude of the reconnection site exceeds 106km, flare loops no longer occur. Shock enhanced radiative cooling triggers the formation of cool H flare loops with predicted densities of 1013 cm–3, and a small gap of 103 km is predicted to exist between the footpoints of the cool flare loops and the inner edges of the flare ribbons. 相似文献
7.
In this paper, we determine the temperature profile along the footpoints of large coronal loops observed by TRACE in both the 171 Å and 195 Å passbands. The temperature along the lower part of these coronal loops only shows small variations and can probably be considered to be isothermal. Using the obtained temperature profile T(s) and an estimate of the column depth along the loop, we then determine the pressure along the lower part of the observed coronal loops and hence the value of the pressure scale length. The obtained scale lengths correspond in order-of-magnitude with the theoretically predicted gravitational scale height. We show that the differences between the observed and predicted scale heights are unlikely to be caused by (significant) flows along the loops but could possibly be a consequence of the inclination of the loops. This implies that the quasi-periodic intensity oscillations observed in the loops are most probably caused by compressive waves propagating upward at the coronal sound speed. 相似文献
8.
Skylab EUV observations of an active region near the solar limb were analyzed. Both cool (T < 106 K) and hot (T > 106 K) loops were observed in this region. For the hot loops the observed intensity variations were small, typically a few percent over a period of 30 min. The cool loops exhibited stronger variations, sometimes appearing and disappearing in 5 to 10 min. Most of the cool material observed in the loops appeared to be caused by the downward flow of coronal rain and by the upward ejection of chromospheric material in surges. The frequent EUV brightenings observed near the loop footpoints appear to have been produced by both in situ transient energy releases (e.g. subflares) and the infall/impact of coronal rain. The physical conditions in the loops (temperatures, densities, radiative and conducting cooling rates, cooling times) were determined. The mean energy required to balance the radiative and conductive cooling of the hot loops is approximately 3 × 10–3 erg cm–3 s–1. One coronal heating mechanism that can account for the observed behavior of the EUV emission from McMath region 12634 is heating by the dissipation of fast mode MHD waves. 相似文献
9.
We studied the morphology and spatial distribution of loops in an active region, using coordinated observations obtained with both the S082A XUV spectroheliograph and the S056 grazingincidence X-ray telescope on Skylab. The active region loops in the temperature range 5 × 105 –3 × 106 K fall basically into two distinctive groups: the hot loops with temperatures 2–3 × 106 K as observed in coronal lines and X-rays, and the relatively cool loops with temperature 5 × 105 –1 × 106 K as observed in transition-zone lines (Ne vii, Mg ix). The brightest hot coronal loops in the active region are mostly low-lying, compact, closely-packed, and show greater stability than the transition-zone loops, which are fewer in number, large, and slender. The observed aspect ratio of the hot coronal loops is in the range of 0.1 and 0.2, which are almost two orders of magnitude larger than those for the Ne vii loops. Brief discussion of the MHD stability of the loops in terms of the aspect ratio is presented. 相似文献
10.
Markus J. Aschwanden 《Solar physics》2005,228(1-2):339-358
EUV images show the solar corona in a typical temperature range of T >rsim 1 MK, which encompasses the most common coronal structures: loops, filaments, and other magnetic structures in active regions,
the quiet Sun, and coronal holes. Quantitative analysis increasingly demands automated 2D feature recognition and 3D reconstruction,
in order to localize, track, and monitor the evolution of such coronal structures. We discuss numerical tools that “fingerprint”
curvi-linear 1D features (e.g., loops and filaments). We discuss existing finger-printing algorithms, such as the brightness-gradient
method, the oriented-connectivity method, stereoscopic methods, time-differencing, and space–time feature recognition. We
discuss improved 2D feature recognition and 3D reconstruction techniques that make use of additional a priori constraints, using guidance from magnetic field extrapolations, curvature radii constraints, and acceleration and velocity
constraints in time-dependent image sequences. Applications of these algorithms aid the analysis of SOHO/EIT, TRACE, and STEREO/SECCHI
data, such as disentangling, 3D reconstruction, and hydrodynamic modeling of coronal loops, postflare loops, filaments, prominences,
and 3D reconstruction of the coronal magnetic field in general. 相似文献
11.
I. Ballai 《Solar physics》2007,246(1):177-185
Following the observation and analysis of large-scale coronal-wave-like disturbances, we discuss the theoretical progress
made in the field of global coronal seismology. Using simple mathematical techniques we determine average values for the magnetic field together with a magnetic map of
the quiet Sun. The interaction between global coronal waves and coronal loops allows us to study loop oscillations in a much
wider context, i.e. we connect global and local coronal oscillations. 相似文献
12.
The coronal mass ejection associated with the loop eruption and coronal dimmings on 2009 December 13
By using the multi-wavelength observations from the Solar Terrestrial Relations Observatory (STEREO), the Solar and Heliospheric Observatory (SOHO), the Transition Region and Coronal Explorer (TRACE) and the HINODE, we study a coronal mass ejection (CME) and associated coronal dimming occurred on 2009 December 13, as a consequence of
the expansion and eruption of EUV loops. The activities were probably triggered by the new flux emergence and the convergence
motions, which were evident in the magnetograms from Michelson Doppler Imager (MDI) on the SOHO. The emergence led to the destabilization and eruption of the preexistent flux rope, which was highly-sheared over the polarity
inversion line. Driven by the ejection of the flux rope, the overlying loops initially slowly rose and then erupted. As a
result, two coronal dimming regions formed at the footprints of the loops and a B1.9 flare, about half an hour later, occurred
in the eruptive region near one foot of the eruptive loops. The CME had a very close temporal and spatial relationship to
the expanding loops, and it is very likely that the CME directly developed from the eruptive loops. The CME mass calculated
from the EUV dimming was of the same order of the typical CME mass, suggesting that the dimming region supplied major of the
mass for the CME. The kinematic evolution of the CME was basically consistent with the three-phases scenario: the initiation
phase, impulsive acceleration phase, and propagation phase. The onset of the CME could be well explained by the emerging flux
trigger mechanism. 相似文献
13.
We investigate the damping of longitudinal (i.e., slow or acoustic) waves in nonisothermal, hot (T≥ 5.0 MK), gravitationally stratified coronal loops. Motivated by SOHO/SUMER and Yohkoh/SXT observations, and by taking into account a range of dissipative mechanisms such as thermal conduction, compressive viscosity, radiative cooling, and heating, the nonlinear governing equations of one-dimensional hydrodynamics are solved numerically for standing-wave oscillations along a magnetic field line. A semicircular shape is chosen to represent the geometry of the coronal loop. It was found that the decay time of standing waves decreases with the increase of the initial temperature, and the periods of oscillations are affected by the different initial footpoint temperatures and loop lengths studied by the numerical experiments. In general, the period of oscillation of standing waves increases and the damping time decreases when the parameter that characterises the temperature at the apex of the loop increases for a fixed footpoint temperature and loop length. A relatively simple second-order scaling polynomial between the damping time and the parameter determining the apex temperature is found. This scaling relation is proposed to be tested observationally. Because of the lack of a larger, statistically relevant number of observational studies of the damping of longitudinal (slow) standing oscillations, it can only be concluded that the numerically predicted decay times are well within the range of values inferred from Doppler shifts observed by SUMER in hot coronal loops. 相似文献
14.
The heating of coronal loops by resonant absorption of Alfvén waves is studied in compressible, resistive magnetohydrodynamics. The loops are approximated by straight cylindrical, axisymmetric plasma columns and the incident waves which excite the coronal loops are modelled by a periodic external driver. The stationary state of this system is determined with a numerical code based on the finite element method. Since the power spectrum of the incident waves is not well known, the intrinsic dissipation is computed. The intrinsic dissipation spectrum is independent of the external driver and reflects the intrinsic ability of the coronal loops to extract energy from incident waves by the mechanism of resonant absorption.The numerical results show that resonant absorption is very efficient for typical parameter values occurring in the loops of the solar corona. A considerable part of the energy supplied by the external driver, is actually dissipated Ohmically and converted into heat. The heating of the plasma is localized in a narrow resonant layer with a width proportional to
1/3. The energy dissipation rate is almost independent of the resistivity for the relevant values of this parameter. The efficiency of the heating mechanism and the localization of the heating strongly depend on the frequency of the external driver. Resonant absorption is extremely efficient when the plasma is excited with a frequency near the frequency of a so-called collective mode. 相似文献
15.
Loop-like white light coronal transients are generally believed to be nearly planar sheets which are thin compared to the loop extent; however, this picture may be questioned since virtually no observations (of the more than 100 transient events observed during 1973–74 Skylab period) show such loops edge-on. From the group of transient events studied by Munro etal. (1979) for which definite surface associations exist, we find loop transients are strongly correlated with filament regions where the filament axis was oriented north-south. From direct soft X-ray observations of an expanding arch, the possible identification of the soft X-ray signature of footpoints of transient loops, and monochramatic observations of low coronal loops, we infer that loop-like coronal transients have their origin in low-lying coronal loops nearly co-planar with the north-south aligned filament axis. The situation with respect to non-loop events is less clear; such events apparently often arise from more complex filament geometries. Possible reasons for the preference of transients to arise from north-south filament-oriented regions are discussed.The National Center for Atmospheric Research is sponsored by the National Science Foundation. 相似文献
16.
We study the pattern and behavior of a rotating sunspot in Active Region 10930. The rotational angular speed has been extracted
from the apparent motions of the sunspot determined by applying a new optical technique – called non-linear affine velocity
estimator (NAVE) – to high-resolution G-band images taken by the Solar Optical Telescope (SOT) onboard the Hinode satellite. The structure and dynamics of coronal loops in this active region have been examined using the images obtained
by the X-Ray Telescope (XRT) and the spectral data taken by the Extreme-ultraviolet Imaging Spectrometer (EIS), both also onboard Hinode. Our results are summarized as follows: i) The small sunspot of positive polarity rotated counterclockwise about its center by 540° during the period of five days.
ii) Its angular velocity varied with the azimuth angle as well as the radial distance, being affected by the asymmetric shape
of the umbra. iii) The angular velocity increased up to 8° h−1 until 13 December as the sunspot grew, and then decreased rapidly down to 3° h−1 on the next day as the sunspot decayed. iv) The coronal loops that connected the two sunspots became sigmoidal in shape. v) The coronal emissions from the regions around the rotating sunspot were blueshifted, which may indicate the expansion of
the coronal loops. Our results suggest that the rotation of the sunspot may be closely related to the dynamic development
of emerging twisted magnetic fields. 相似文献
17.
High-lying, dynamic loops have been observed at transition region temperatures since Skylab observations. The nature of these loops has been debated for many years with several explanations having been put forward. These include that the loops are merely cooling from hotter coronal loops, that they are produced from siphon flows, or that they are loops heated only to transition region temperatures. In this paper we will make use of combined SOHO-MDI (Michelson-Doppler Imager), SOHO-CDS (Coronal Diagnostic Spectrometer) and Yohkoh SXT (Soft X-ray Telescope) datasets in order to determine whether the appearance of transition region loops is related to small-scale flaring in the corona, and to estimate the magnetic configuration of the loops. The latter allows us to determine the direction of plasma flows in the transition region loops. We find that the appearance of the transition region loops is often related to small-scale flaring in the corona and in this case the transition region loops appear to be cooling with material draining down from the loop top. 相似文献
18.
High-lying, dynamic loops have been observed at transition region temperatures since Skylab observations. The nature of these loops has been debated for many years with several explanations having been put forward. These include that the loops are merely cooling from hotter coronal loops, that they are produced from siphon flows, or that they are loops heated only to transition region temperatures. In this paper we will make use of combined SOHO-MDI (Michelson-Doppler Imager), SOHO-CDS (Coronal Diagnostic Spectrometer) and Yohkoh SXT (Soft X-ray Telescope) datasets in order to determine whether the appearance of transition region loops is related to small-scale flaring in the corona, and to estimate the magnetic configuration of the loops. The latter allows us to determine the direction of plasma flows in the transition region loops. We find that the appearance of the transition region loops is often related to small-scale flaring in the corona and in this case the transition region loops appear to be cooling with material draining down from the loop top. 相似文献
19.
It is now known that the corona is filled with a multitude of loop-like structures. The likelihood of these loops being in static equilibrium is small and so this paper explores the possibility of steady isothermal or adiabatic flows, driven by a pressure difference between the loop feet. For a symmetric loop the flow becomes supersonic at the summit and is then retarded by a shock-wave at some point on the downflowing leg. The effect of adiabatic flow is to lower both pressure and temperature by at least a factor of two and so provide a possible explanation for the cool cores that are sometimes observed in coronal loops.
Asymmetric loops, whose cross-sectional area increases or decreases in the flow direction, are found to possess a wide range of both subsonic and shocked flows. Converging loops have subsonic flows if the pressure difference between the footpoints is small, but shocked flows if the pressure difference is large enough. Diverging loops exhibit only shocked flows towards a low pressure footpoint, but can have either subsonic or shocked flow towards a high pressure footpoint. Flows in diverging loops can therefore be either accelerated or decelerated. 相似文献
20.
Kenneth P. Dere 《Solar physics》1982,75(1-2):189-203
XUV spectroheliograms of 2 active regions are studied. The images are due to lines emitted at temperatures between 8 x 104 K and 2 x 106 K and thus are indicative of transition region and coronal structures. The hot coronal lines are formed solely in loop structures which connect regions of opposite photospheric magnetic polarity but are not observed over sunspots. Transition region lines are emitted in plages overlying regions of intense photospheric magnetic field and in loops or loop-segments connecting such regions. The hot coronal loops are supported hydrostatically while only some of the transition zone loops are. The coronal and transition zone loops are distinctly separated and are not coaxial. A comparison of direct measurements of electron densities using density sensitive line ratios with indirect measurements using emission measures and path lengths shows the existence of fine structures of less than a second of arc in transition region loops. From a similar analysis, hot coronal loops do not have any fine structure below about 2 seconds of arc. 相似文献