Bioreduction of Fe-bearing clay minerals and their reactivity toward pertechnetate (Tc-99)     

Michael E. Bishop  Ravi K. Kukkadapu  Richard E. Edelmann 《Geochimica et cosmochimica acta》2011,75(18):5229-5246

⁹⁹Technetium (⁹⁹Tc) is a fission product of uranium-235 and plutonium-239 and poses a high environmental hazard due to its long half-life (t_1/2 = 2.13 × 10⁵ y), abundance in nuclear wastes, and environmental mobility under oxidizing conditions [i.e., Tc(VII)]. Under reducing conditions, Tc(VII) can be reduced to insoluble Tc(IV). Ferrous iron, either in aqueous form (Fe²⁺) or in mineral form [Fe(II)], has been used to reduce Tc(VII) to Tc(IV). However, the reactivity of Fe(II) from clay minerals, other than nontronite, toward immobilization of Tc(VII) and its role in retention of reduced Tc(IV) has not been investigated. In this study the reactivity of a suite of clay minerals toward Tc(VII) reduction and immobilization was evaluated. The clay minerals chosen for this study included five members in the smectite-illite (S-I) series, (montmorillonite, nontronite, rectorite, mixed layered I-S, and illite), chlorite, and palygorskite. Surface Fe-oxides were removed from these minerals with a modified dithionite-citrate-bicarbonate (DCB) procedure. The total structural Fe content of these clay minerals, after surface Fe-oxide removal, ranged from 0.7% to 30.4% by weight, and the structural Fe(III)/Fe(total) ratio ranged from 45% to 98%. X-ray diffraction (XRD) and Mössbauer spectroscopy results showed that after Fe oxide removal the clay minerals were free of Fe-oxides. Scanning electron microscopy (SEM) revealed that little dissolution occurred during the DCB treatment. Bioreduction experiments were performed in bicarbonate buffer (pH-7) with structural Fe(III) in the clay minerals as the sole electron acceptor, lactate as the sole electron donor, and Shewanella putrefaciens CN32 cells as a mediator. In select tubes, anthraquinone-2,6-disulfate (AQDS) was added as electron shuttle to facilitate electron transfer. In the S-I series, smectite (montmorillonite) was the most reducible (18% and 41% without and with AQDS, respectively) and illite the least (1% for both without and with AQDS). The extent and initial rate of bioreduction were positively correlated with the percent smectite in the S-I series (i.e., layer expandability). Fe(II) in the bioreduced clay minerals subsequently was used to reduce Tc(VII) to Tc(IV) in PIPES buffer. Similar to the trend of bioreduction, in the S-I series, reduced NAu-2 showed the highest reactivity toward Tc(VII), and reduced illite exhibited the least. The initial rate of Tc(VII) reduction, after normalization to clay and Fe(II) concentrations, was positively correlated with the percent smectite in the S-I series. Fe(II) in chlorite and palygorskite was also reactive toward Tc(VII) reduction. These data demonstrate that crystal chemical parameters (layer expandability, Fe and Fe(II) contents, and surface area, etc.) play important roles in controlling the extent and rate of bioreduction and the reactivity toward Tc(VII) reduction. Reduced Tc(IV) resides within clay mineral matrix, and this association could minimize any potential of reoxidation over long term.  相似文献   

Evaluation of redox-active iron sites in smectites using middle and near infrared spectroscopy   总被引：1，自引：0，他引：1  

Anke Neumann  Thomas B. Hofstetter 《Geochimica et cosmochimica acta》2011,75(9):2336-2355

Redox processes of structural Fe in clay minerals play an important role in biogeochemical cycles and for the dynamics of contaminant transformation in soils and aquifers. Reactions of Fe(II)/Fe(III) in clay minerals depend on a variety of mineralogical and environmental factors, which make the assessment of Fe redox reactivity challenging. Here, we use middle and near infrared (IR) spectroscopy to identify reactive structural Fe(II) arrangements in four smectites that differ in total Fe content, octahedral cationic composition, location of the negative excess charge, and configuration of octahedral hydroxyl groups. Additionally, we investigated the mineral properties responsible for the reversibility of structural alterations during Fe reduction and re-oxidation. For Wyoming montmorillonite (SWy-2), a smectite of low structural Fe content (2.8 wt%), we identified octahedral AlFe(II)-OH as the only reactive Fe(II) species, while high structural Fe content (>12 wt%) was prerequisite for the formation of multiple Fe(II)-entities (dioctahedral AlFe(II)-OH, MgFe(II)-OH, Fe(II)Fe(II)-OH, and trioctahedral Fe(II)Fe(II)Fe(II)-OH) in iron-rich smectites Ölberg montmorillonite, and ferruginous smectite (SWa-1), as well as in synthetic nontronite. Depending on the overall cationic composition and the location of excess charge, different reactive Fe(II) species formed during Fe reduction in iron-rich smectites, including tetrahedral Fe(II) groups in synthetic nontronite. Trioctahedral Fe(II) domains were found in tetrahedrally charged ferruginous smectite and synthetic nontronite in their reduced state while these Fe(II) entities were absent in Ölberg montmorillonite, which exhibits an octahedral layer charge. Fe(III) reduction in iron-rich smectites was accompanied by intense dehydroxylation and structural rearrangements, which were only partially reversible through re-oxidation. Re-oxidation of Wyoming montmorillonite, in contrast, restored the original mineral structure. Fe(II) oxidation experiments with nitroaromatic compounds as reactive probes were used to link our spectroscopic evidence to the apparent reactivity of structural Fe(II) in a generalized kinetic model, which takes into account the presence of Fe(II) entities of distinctly different reactivity as well as the dynamics of Fe(II) rearrangements.  相似文献   

Thermally induced cation migration in Na and Li montmorillonite     

V. Luca  C. M. Cardile 《Physics and Chemistry of Minerals》1988,16(1):98-103

In order to determine whether Li⁺ cations penetrate into the octahedral layers of montmorillonites upon mild heating (Hofmann-Klemen effect) ⁵⁷Fe Mössbauer spectra of Na⁺ and Li⁺ exchanged montmorillonite were obtained before and after treatment at 220 ° C. The ⁵⁷Fe nucleus was used as a remote probe to detect electronic perturbations which would occur if a Li cation was to move into the octahedral layer from the interlayer after heating. The ambient Mössbauer spectra showed that a high charge density interlayer cation such as Li⁺ is effective in reducing the phonon energy of ^VIFe²⁺. In addition the EFG at octahedral sites can be significantly modified by interlayer cations as evidenced by the larger quadrupole splitting value measured for the Li⁺-exchanged sample with respect to the Na⁺-sample. Interlayer collapse and migration of exchange cations into the montmorillonite lattice after heating to 220 ° C resulted in the oxidation of the ^VIFe²⁺ and a decrease in site distortion for ^IVFe³⁺. Similar spectral parameters for the Fe³⁺ resonances of both Na⁺ — and Li⁺-heated samples suggested the interlayer cations do not penetrate as far as the octahedral layers. In order to utilize the enhanced sensitivity of ^VIFe²⁺ Δ values to changes in EFG the Fe³⁺ in the heated montmorillonites was reduced to Fe²⁺ with hydrazine. Similar spectral parameters for both the Na⁺ — and Li⁺-exchanged montmorillonite were observed giving further evidence that Li cations do not migrate into vacant octahedral sites.  相似文献   

Control of Fe(III) site occupancy on the rate and extent of microbial reduction of Fe(III) in nontronite     

Deb P. Jaisi  Dennis D. Eberl 《Geochimica et cosmochimica acta》2005,69(23):5429-5440

A quantitative study was performed to understand how Fe(III) site occupancy controls Fe(III) bioreduction in nontronite by Shewanella putrefaciens CN32. NAu-1 and NAu-2 were nontronites and contained Fe(III) in different structural sites with 16 and 23% total iron (w/w), respectively, with almost all iron as Fe(III). Mössbauer spectroscopy showed that Fe(III) was present in the octahedral site in NAu-1 (with a small amount of goethite), but in both the tetrahedral and the octahedral sites in NAu-2. Mössbauer data further showed that the octahedral Fe(III) in NAu-2 existed in at least two environments- trans (M1) and cis (M2) sites. The microbial Fe(III) reduction in NAu-1 and NAu-2 was studied in batch cultures at a nontronite concentration of 5 mg/mL in bicarbonate buffer with lactate as the electron donor. The unreduced and bioreduced nontronites were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy, and transmission electron microscopy (TEM). In the presence of an electron shuttle, anthraquinone-2,6-disulfonate (AQDS), the extent of bioreduction was 11%-16% for NAu-1 but 28%-32% for NAu-2. The extent of reduction in the absence of AQDS was only 5%-7% for NAu-1 but 14%-18% for NAu-2. The control experiments with heat killed cells and without cells did not show any appreciable reduction (<2%). The extent of reduction in experiments performed with a dialysis membrane to separate cells from clays (without AQDS) was 2%-3% for NAu-1 but 5%-7% for NAu-2, suggesting that cells probably released an electron shuttling compound and/or Fe(III) chelator. The reduction rate was also faster in NAu-2 than that in NAu-1. Mössbauer data of the bioreduced nontronite materials indicated that the Fe(III) reduction in NAu-1 was mostly from the presence of goethite, whereas the reduction in NAu-2 was due to the presence of the tetrahedral and trans-octahedral Fe(III) in the structure. The measured aqueous Fe(II) was negligible. As a result of bioreduction, the average nontronite particle thickness remained nearly the same (from 2.1 to 2.5 nm) for NAu-1, but decreased significantly from 6 to 3.5 nm for NAu-2 with a concomitant change in crystal size distribution. The decrease in crystal size suggests reductive dissolution of nontronite NAu-2, which was supported by aqueous solution chemistry (i.e., aqueous Si). These data suggest that the more extensive Fe(III) bioreduction in NAu-2 was due to the presence of the tetrahedral and the trans-octahedral Fe(III), which was presumed to be more reducible. The biogenic Fe(II) was not associated with biogenic solids or in the aqueous solution. We infer that it may be either adsorbed onto surfaces of nontronite particles/bacteria or in the structure of nontronite. Furthermore, we have demonstrated that natural nontronite clays were capable of supporting cell growth even in medium without added nutrients, possibly due to presence of naturally existing nutrients in the nontronite clays. These results suggest that crystal chemical environment of Fe(III) is an important determinant in controlling the rate and extent of microbial reduction of Fe(III) in nontronite.  相似文献   

Iron geochemical zonation in a tidally inundated acid sulfate soil wetland     

Scott G. Johnston  Annabelle F. Keene  Richard T. Bush  Edward D. Burton  Leigh A. Sullivan  Lloyd Isaacson  Angus E. McElnea  Col R. Ahern  C. Douglas Smith  Bernard Powell 《Chemical Geology》2011,280(3-4):257-270

Tidal inundation is a new technique for remediating coastal acid sulfate soils (CASS). Here, we examine the effects of this technique on the geochemical zonation and cycling of Fe across a tidally inundated CASS toposequence, by investigating toposequence hydrology, in situ porewater geochemistry, solid-phase Fe fractions and Fe mineralogy. Interactions between topography and tides exerted a fundamental hydrological control on the geochemical zonation, redistribution and subsequent mineralogical transformations of Fe within the landscape. Reductive dissolution of Fe(III) minerals, including jarosite (KFe₃(SO₄)₂(OH)₆), resulted in elevated concentrations of porewater Fe²⁺ (> 30 mmol L^?1) in former sulfuric horizons in the upper-intertidal zone. Tidal forcing generated oscillating hydraulic gradients, driving upward advection of this Fe²⁺-enriched porewater along the intertidal slope. Subsequent oxidation of Fe²⁺ led to substantial accumulation of reactive Fe(III) fractions (up to 8000 μmol g^?1) in redox-interfacial, tidal zone sediments. These Fe(III)-precipitates were poorly crystalline and displayed a distinct mineralisation sequence related to tidal zonation. Schwertmannite (Fe₈O₈(OH)₆SO₄) was the dominant Fe mineral phase in the upper-intertidal zone at mainly low pH (3–4). This was followed by increasing lepidocrocite (γ-FeOOH) and goethite (α-FeOOH) at circumneutral pH within lower-intertidal and subtidal zones. Relationships were evident between Fe fractions and topography. There was increasing precipitation of Fe-sulfide minerals and non-sulfidic solid-phase Fe(II) in the lower intertidal and subtidal zones. Precipitation of Fe-sulfide minerals was spatially co-incident with decreases in porewater Fe²⁺. A conceptual model is presented to explain the observed landscape-scale patterns of Fe mineralisation and hydro-geochemical zonation. This study provides valuable insights into the hydro-geochemical processes caused by saline tidal inundation of low lying CASS landscapes, regardless of whether inundation is an intentional strategy or due to sea-level rise.  相似文献   

Crystal chemistry of ferric iron in (Mg,Fe)(Si,Al)O<Subscript>3</Subscript> majorite with implications for the transition zone     

C. A. McCammon  N. L. Ross 《Physics and Chemistry of Minerals》2003,30(4):206-216

Fifteen samples of (Mg,Fe)SiO₃ majorite with varying Fe/Mg composition and one sample of (Mg,Fe)(Si,Al)O₃ majorite were synthesized at high pressure and temperature under different conditions of oxygen fugacity using a multianvil press, and examined ex situ using X-ray diffraction and Mössbauer and optical absorption spectroscopy. The relative concentration of Fe³⁺ increases both with total iron content and increasing oxygen fugacity, but not with Al concentration. Optical absorption spectra indicate the presence of Fe²⁺–Fe³⁺ charge transfer, where band intensity increases with increasing Fe³⁺ concentration. Mössbauer data were used in conjunction with electron microprobe analyses to determine the site distribution of all cations. Both Al and Fe³⁺ substitute on the octahedral site, and charge balance occurs through the removal of Si. The degree of Mg/Si ordering on the octahedral sites in (Mg,Fe)SiO₃ majorite, which affects both the c/a ratio and the unit cell volume, is influenced by the thermal history of the sample. The Fe³⁺ concentration of (Mg,Fe)(Si,Al)O₃ majorite in the mantle will reflect prevailing redox conditions, which are believed to be relatively reducing in the transition zone. Exchange of material across the transition boundary to (Mg,Fe) (Si,Al)O₃ perovskite would then require a mechanism to oxidize sufficient iron to satisfy crystal-chemical requirements of the lower-mantle perovskite phase.  相似文献   

Fast transformation of iron oxyhydroxides by the catalytic action of aqueous Fe(II)     

Hanne D. Pedersen  Dieke Postma  Ole Larsen 《Geochimica et cosmochimica acta》2005,69(16):3967-3977

Iron oxides may undergo structural transformations when entering an anoxic environment. These transformations were investigated using the isotopic exchange between aqueous Fe(II) and iron oxides in experiments with ⁵⁵Fe-labelled iron oxides. ⁵⁵Fe was incorporated congruently into a ferrihydrite, two lepidocrocites (#1 and #2), synthesised at 10°C and 25°C, respectively, a goethite and a hematite. The iron oxides were then submerged in Fe²⁺ solutions (0-1.0 mM) with a pH of 6.5. In the presence of aqueous Fe²⁺, an immediate and very rapid release of ⁵⁵Fe was observed from ferrihydrite, the two lepidocrocites and goethite, whereas in the absence of Fe²⁺ no release was observed. ⁵⁵Fe was not released from hematite, even at the higher Fe²⁺ concentration. The release rate is mainly controlled by characteristics of the iron oxides, whereas the concentration of Fe²⁺ only has minor influence. Ferrihydrite and 5-nm-sized lepidocrocite crystals attained complete isotopic equilibration with aqueous Fe(II) within days. Within this timeframe ferrihydrite transformed completely into new and more stable phases such as lepidocrocite and goethite. Lepidocrocite #2 and goethite, having larger particles, did not reach isotopic equilibrium within the timeframe of the experiment; however, the continuous slow release of ⁵⁵Fe suggests that isotopic equilibrium will ultimately be attained.Our results imply a recrystallization of solid Fe(III) phases induced by the catalytic action of aqueous Fe(II). Accordingly, iron oxides should properly be considered as dynamic phases that change composition when exposed to variable redox conditions. These results necessitate a reevaluation of current models for the release of trace metals under reducing conditions, the sequestration of heavy metals by iron oxides, and the significance of stable iron isotope signatures.  相似文献   

Experimental constraints on Fe isotope fractionation during magnetite and Fe carbonate formation coupled to dissimilatory hydrous ferric oxide reduction   总被引：3，自引：0，他引：3  

Clark M. Johnson  Eric E. Roden  Brian L. Beard 《Geochimica et cosmochimica acta》2005,69(4):963-993

Iron isotope fractionation between aqueous Fe(II) and biogenic magnetite and Fe carbonates produced during reduction of hydrous ferric oxide (HFO) by Shewanella putrefaciens, Shewanella algae, and Geobacter sulfurreducens in laboratory experiments is a function of Fe(III) reduction rates and pathways by which biogenic minerals are formed. High Fe(III) reduction rates produced ⁵⁶Fe/⁵⁴Fe ratios for Fe(II)_aq that are 2-3‰ lower than the HFO substrate, reflecting a kinetic isotope fractionation that was associated with rapid sorption of Fe(II) to HFO. In long-term experiments at low Fe(III) reduction rates, the Fe(II)_aq-magnetite fractionation is −1.3‰, and this is interpreted to be the equilibrium fractionation factor at 22°C in the biologic reduction systems studied here. In experiments where Fe carbonate was the major ferrous product of HFO reduction, the estimated equilibrium Fe(II)_aq-Fe carbonate fractionations were ca. 0.0‰ for siderite (FeCO₃) and ca. +0.9‰ for Ca-substituted siderite (Ca_0.15Fe_0.85CO₃) at 22°C. Formation of precursor phases such as amorphous nonmagnetic, noncarbonate Fe(II) solids are important in the pathways to formation of biogenic magnetite or siderite, particularly at high Fe(III) reduction rates, and these solids may have ⁵⁶Fe/⁵⁴Fe ratios that are up to 1‰ lower than Fe(II)_aq. Under low Fe(III) reduction rates, where equilibrium is likely to be attained, it appears that both sorbed Fe(II) and amorphous Fe(II)(s) components have isotopic compositions that are similar to those of Fe(II)_aq.The relative order of δ⁵⁶Fe values for these biogenic minerals and aqueous Fe(II) is: magnetite > siderite ≈ Fe(II)_aq > Ca-bearing Fe carbonate, and this is similar to that observed for minerals from natural samples such as Banded Iron Formations (BIFs). Where magnetite from BIFs has δ⁵⁶Fe >0‰, the calculated δ⁵⁶Fe value for aqueous Fe(II) suggests a source from midocean ridge (MOR) hydrothermal fluids. In contrast, magnetite from BIFs that has δ⁵⁶Fe ≤0‰ apparently requires formation from aqueous Fe(II) that had very low δ⁵⁶Fe values. Based on this experimental study, formation of low-δ⁵⁶Fe Fe(II)_aq in nonsulfidic systems seems most likely to have been produced by dissimilatory reduction of ferric oxides by Fe(III)-reducing bacteria.  相似文献   

A Mössbauer and X-ray diffraction study of annites synthesized at different oxygen fugacities and crystal chemical implications     

G. J. Redhammer  A. Beran  E. Dachs  G. Amthauer 《Physics and Chemistry of Minerals》1993,20(6):382-394

A refined set of Mössbauer parameters (isomer shifts, quadrupole splittings, Fe²⁺/Fe³⁺ ratios) and lattice parameters were obtained from annites synthesized hydrothermally at pressures between 3 and 5 kbars, temperatures ranging from 250 to 780° C and oxygen fugacities controlled by solid state buffers (NNO, QMF, IM, IQF). Mössbauer spectra showed Fe²⁺ and Fe³⁺ on both the M1 and the M2 site. A linear relationship between Fe³⁺ content and oxygen fugacity was observed. Towards low Fe³⁺ values this linear relationship ends at ≈10% of total iron showing that the Fe³⁺ content cannot be reduced further even if more reducing conditions are used. This indicates that in annite at least 10% Fe²⁺ are substituted by Fe³⁺ in order to match the larger octahedral layer to the smaller tetrahedral layer. IR spectra indicate that formation of octahedral vacancies plays an important role for charge balance through the substitution 3 Fe²⁺ → 2 Fe³⁺ + ?_(oct).  相似文献   

Evidence for equilibrium iron isotope fractionation by nitrate-reducing iron(II)-oxidizing bacteria     

Kappler A  Johnson CM  Crosby HA  Beard BL  Newman DK 《Geochimica et cosmochimica acta》2010,74(10):2826-1852

Iron isotope fractionations produced during chemical and biological Fe(II) oxidation are sensitive to the proportions and nature of dissolved and solid-phase Fe species present, as well as the extent of isotopic exchange between precipitates and aqueous Fe. Iron isotopes therefore potentially constrain the mechanisms and pathways of Fe redox transformations in modern and ancient environments. In the present study, we followed in batch experiments Fe isotope fractionations between Fe(II)_aq and Fe(III) oxide/hydroxide precipitates produced by the Fe(III) mineral encrusting, nitrate-reducing, Fe(II)-oxidizing Acidovorax sp. strain BoFeN1. Isotopic fractionation in ⁵⁶Fe/⁵⁴Fe approached that expected for equilibrium conditions, assuming an equilibrium Δ⁵⁶Fe_{Fe(OH)3-Fe(II)aq} fractionation factor of +3.0‰. Previous studies have shown that Fe(II) oxidation by this Acidovorax strain occurs in the periplasm, and we propose that Fe isotope equilibrium is maintained through redox cycling via coupled electron and atom exchange between Fe(II)_aq and Fe(III) precipitates in the contained environment of the periplasm. In addition to the apparent equilibrium isotopic fractionation, these experiments also record the kinetic effects of initial rapid oxidation, and possible phase transformations of the Fe(III) precipitates. Attainment of Fe isotope equilibrium between Fe(III) oxide/hydroxide precipitates and Fe(II)_aq by neutrophilic, Fe(II)-oxidizing bacteria or through abiologic Fe(II)_aq oxidation is generally not expected or observed, because the poor solubility of their metabolic product, i.e. Fe(III), usually leads to rapid precipitation of Fe(III) minerals, and hence expression of a kinetic fractionation upon precipitation; in the absence of redox cycling between Fe(II)_aq and precipitate, kinetic isotope fractionations are likely to be retained. These results highlight the distinct Fe isotope fractionations that are produced by different pathways of biological and abiological Fe(II) oxidation.  相似文献   

Electronic absorption spectra of Fe2+ ions in oxygen-based rock-forming minerals at temperatures between 297 and 600 K     

M. N. Taran  K. Langer 《Physics and Chemistry of Minerals》2001,28(3):199-210

 Polarized electronic single crystal spectra of natural Fe²⁺ ion-bearing oxygen-based minerals, in which ferrous ions enter octahedral sites of different symmetry and distortion (olivine, cordierite, ortho- and clinopyroxene, amphibole), eightfold sites in garnet (almandine) and clinopyroxene (M2), and tetrahedral sites in spinel, were studied at temperatures from 300 to ca. 600 K. In the minerals studied, the spin-allowed bands of Fe²⁺ display rather variable temperature behaviour. In most cases, due to the thermal expansion of the Fe²⁺-bearing polyhedra, bands shift to lower energies upon increasing temperature, though there are some exceptions to this rule: in cases of other than sixfold octahedral or close to octahedral coordination, in almandine and spinel the bands shift to higher energies, which can be explained by an increase in distortions of the Fe²⁺-bearing polyhedra. Splitting of the excited ⁵ E _g-level of Fe²⁺ ions usually, but not always, increases with temperature, reflecting thermally induced increase in distortion of the Fe²⁺-bearing sites in the minerals studied. Integral intensities of the bands in question do not always obey the general rule, according to which intensity should increase with temperature, when the 3d ^N-centred site is centrosymmetric, or should remain unchanged when the 3d ^N site lacks an inversion centre. The experimental results show that the response of the characteristics of absorption bands such as width, intensity and energy caused by dd transitions of Fe²⁺ in oxygen-based minerals to increasing temperature is not always uniform and is at variance with expectation. This temperature dependence cannot be used directly to solve band assignment problems, as earlier proposed in the literature. Received: 22 December 1999 / Accepted: 30 October 2000  相似文献   

Iron control by equilibria between hydroxy-Green Rusts and solutions in hydromorphic soils     

《Geochimica et cosmochimica acta》1999,63(19-20):3417-3427

In order to verify Fe control by solution - mineral equilibria, soil solutions were sampled in hydromorphic soils on granites and shales, where the occurrence of Green Rusts had been demonstrated by Mössbauer and Raman spectroscopies. Eh and pH were measured in situ, and Fe(II) analyzed by colorimetry. Ionic Activity Products were computed from aqueous Fe(II) rather than total Fe in an attempt to avoid overestimation by including colloidal particles. Solid phases considered are Fe(II) and Fe(III) hydroxides and oxides, and the Green Rusts whose general formula is [Fe^II_1−xFe^III_x(OH)₂]^+x· [x/z A^−z]^−x, where compensating interlayer anions, A⁻, can be Cl⁻, SO₄²⁻, CO₃²⁻ or OH⁻, and where x ranges a priori from 0 to 1. In large ranges of variation of pH, pe and Fe(II) concentration, soil solutions are (i) oversaturated with respect to Fe(III) oxides; (ii) undersaturated with respect to Fe(II) oxides, chloride-, sulphate- and carbonate-Green Rusts; (iii) in equilibrium with hydroxy-Green Rusts, i.e., Fe(II)-Fe(III) mixed hydroxides. The ratios, x = Fe(III)/Fe_t, derived from the best fits for equilibrium between minerals and soil solutions are 1/3, 1/2 and 2/3, depending on the sampling site, and are in every case identical to the same ratios directly measured by Mössbauer spectroscopy. This implies reversible equilibrium between Green Rust and solution. Solubility products are proposed for the various hydroxy-Green Rusts as follows: log K_sp = 28.2 ± 0.8 for the reaction Fe₃(OH)₇ + e⁻ + 7 H⁺ = 3 Fe²⁺ + 7 H₂O; log K_sp = 25.4 ± 0.7 for the reaction Fe₂(OH)₅ + e⁻ + 5 H⁺ = 2 Fe²⁺ + 5 H₂O; log K_sp = 45.8 ± 0.9 for the reaction Fe₃(OH)₈ + 2e⁻ + 8 H⁺ = 3 Fe²⁺ + 8 H₂O at an average temperature of 9 ± 1°C, and 1 atm. pressure. Tentative values for the Gibbs free energies of formation of hydroxy-Green Rusts obtained are: Δ_fG° (Fe₃(OH)₇, cr, 282.15 K) = −1799.7 ± 6 kJ mol⁻¹, Δ_fG° (Fe₂(OH)₅, cr, 282.15 K) = −1244.1 ± 6 kJ mol⁻¹ and Δ_fG° (Fe₃(OH)₈, cr, 282.15 K) = −1944.3 ± 6 kJ mol⁻¹.  相似文献   

Optical absorption of electronic Fe–Ti charge-transfer transition in natural andalusite: the thermal stability of the charge-transfer band     

Michail N. Taran  Monika Koch-Müller 《Physics and Chemistry of Minerals》2011,38(3):215-222

Differently colored natural Brazilian andalusite crystals heat-treated under reducing and oxidizing conditions were analyzed by optical spectroscopy. The intensity of a broad intense band at around 20,500 cm⁻¹ in the optical absorption spectra of all color zones of the sample is proportional to the product of Ti- and Fe-concentrations and herewith proves its attribution to electronic Fe²⁺/Ti⁴⁺ IVCT transition. The band is strictly E||c-polarized, causing an intense red coloration of the samples in this polarization. The polarization of the Fe²⁺/Ti⁴⁺ IVCT band in andalusite, E||c, shows that the electronic charge-transfer process takes place in Al–O octahedral groups that share edges with neighbors on either side, forming chains parallel to the c-axis of the andalusite structure. Under thermal treatments in air, the first noticeable change is some intensification of the band at 800°C. However, at higher temperatures its intensity decreases until it vanishes at 1,000°C in lightly colored zones and 1,100°C in darkly colored ones. Under annealing in reducing conditions at 700 and 800°C, the band also slightly increases and maintains its intensity at treatments at higher temperatures up to 1,000°C. These results demonstrate that weakening and disappearance of the Fe²⁺/Ti⁴⁺ IVCT band in spectra of andalusite under annealing in air is caused by oxidization of Fe²⁺ to Fe³⁺ in IVCT Fe²⁺/Ti⁴⁺-pairs. Some intensification of the band at 800°C is, most probably, due to thermally induced diffusion of Fe²⁺ and Ti⁴⁺ in the structure that leads to aggregation of “isolated” Ti⁴⁺ and Fe²⁺ ions into Fe²⁺–Ti⁴⁺-pairs. At higher temperatures, the competing process of Fe²⁺ → Fe³⁺ oxidation overcomes such “coupling” and the band continues to decrease. The different thermal stability of the band in lightly and darkly colored zones of the samples evidence some self-stabilization over an interaction of Fe²⁺/Ti⁴⁺-pairs involved in IVCT process.  相似文献   

Microbial reduction of iron(III)-rich nontronite and uranium(VI)     

Gengxin Zhang  Shelly D. Kelly  Kenneth M. Kemner 《Geochimica et cosmochimica acta》2009,73(12):3523-250

To assess the dynamics of microbially mediated U-clay redox reactions, we examined the reduction of iron(III)-rich nontronite NAu-2 and uranium(VI) by Shewanella oneidensis MR-1. Bioreduction experiments were conducted with combinations and varied concentrations of MR-1, nontronite, U(VI) and the electron shuttle anthraquinone-2,6-disulfonate (AQDS). Abiotic experiments were conducted to quantify U(VI) sorption to NAu-2, the reduction of U(VI) by chemically-reduced nontronite-Fe(II), and the oxidation of uraninite, U^(IV)O_2(s), by nontronite-Fe(III). When we incubated S. oneidensis MR-1 at lower concentration (0.5 × 10⁸ cell mL⁻¹) with nontronite (5.0 g L⁻¹) and U(VI) (1.0 mM), little U(VI) reduction occurred compared to nontronite-free incubations, despite the production of abundant Fe(II). The addition of AQDS to U(VI)- and nontronite-containing incubations enhanced both U(VI) and nontronite-Fe(III) reduction. While U(VI) was completely reduced by S. oneidensis MR-1 at higher concentration (1.0 × 10⁸ cell mL⁻¹) in the presence of nontronite, increasing concentrations of nontronite led to progressively slower rates of U(VI) reduction. U(VI) enhanced nontronite-Fe(III) reduction and uraninite was oxidized by nontronite-Fe(III), demonstrating that U served as an effective electron shuttle from S. oneidensis MR-1 to nontronite-Fe(III). The electron-shuttling activity of U can explain the lack or delay of U(VI) reduction observed in the bulk solution. Little U(VI) reduction was observed in incubations that contained chemically-reduced nontronite-Fe(II), suggesting that biologic U(VI) reduction drove U valence cycling in these systems. Under the conditions used in these experiments, we demonstrate that iron-rich smectite may inhibit or delay U(VI) bioreduction.  相似文献   

Structure and specification of iron complexes in aqueous solutions determined by X-ray absorption spectroscopy     

M.J. Apted  G.A. Waychunas  G.E. Brown 《Geochimica et cosmochimica acta》1985,49(10):2081-2089

X-ray absorption spectroscopy, including extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) techniques, have been used to determine the structure and speciation of complexes for Fe²⁺ and Fe³⁺ chloride solutions at a variety of pH's, ionic strengths, and chloride/iron ratios.Low intensity K-edge transition features and analysis of modified pair correlation functions, derived from Fourier transformation of EXAFS spectra, show a regular octahedral coordination of Fe(II) by water molecules with a first-shell Fe²⁺-O bond distance, closely matching octahedral Fe²⁺-O bonds obtained from solid oxide model compounds. Solution Fe²⁺-O bond distances decrease with chloride/iron ratio, pH, and total FeCl₂ concentration. A slight intensification of the $\text{1s → 3d}$ transition with increasing FeCl₂ concentration suggests that chloride may begin to mix with water as a nearest-neighbor octahedral ligand. Fe³⁺ solutions show a pronounced increase in the $\text{1s → 3d}$ transition intensities between 1.0 M FeCl₃/7.8 M Cl^? to 1.0 M FeCl₃/ 15 M Cl^?, indicating a coordination change from octahedral to tetrahedral complexes. EXAFS analyses of these solutions show an increase in first-shell Fe³⁺-ligand distances despite this apparent reduction in coordination number. This can be best explained by a change from regular octahedral complexes of ferric iron (either Fe(H₂O)₆³⁺ or trans-Fe(H₂O)₄Cl₂ or both; Fe³⁺-O bond distances of 2.10 Å) to tetra-chloro complexes [Fe³⁺-Cl bond distances of 2.25 Å].  相似文献   

Kinetic and equilibrium Fe isotope fractionation between aqueous Fe(III) and hematite   总被引：1，自引：0，他引：1  

Joseph L. SkulanBrian L. Beard  Clark M. Johnson 《Geochimica et cosmochimica acta》2002,66(17):2995-3015

Application of the Fe isotope system to studies of natural rocks and fluids requires precise knowledge of equilibrium Fe isotope fractionation factors among various aqueous Fe species and minerals. These are difficult to obtain at the low temperatures at which Fe isotope fractionation is expected to be largest and requires careful distinction between kinetic and equilibrium isotope effects. A detailed investigation of Fe isotope fractionation between [Fe^III(H₂O)₆]³⁺ and hematite at 98°C allows the equilibrium ⁵⁶Fe/⁵⁴Fe fractionation to be inferred, which we estimate at 10³lnα_{Fe(III)-hematite} = −0.10 ± 0.20‰. We also infer that the slope of Fe(III)-hematite fractionation is modest relative to 10⁶/T², which would imply that this fractionation remains close to zero at lower temperatures. These results indicate that Fe isotope compositions of hematite may closely approximate those of the fluids from which they precipitated if equilibrium isotopic fractionation is assumed, allowing inference of δ⁵⁶Fe values of ancient fluids from the rock record. The equilibrium Fe(III)-hematite fractionation factor determined in this study is significantly smaller than that obtained from the reduced partition function ratios calculated for [Fe^III(H₂O)₆]³⁺ and hematite based on vibrational frequencies and Mössbauer shifts by [Polyakov 1997] and [Polyakov and Mineev 2000], and Schauble et al. (2001), highlighting the importance of experimental calibration of Fe isotope fractionation factors. In contrast to the long-term (up to 203 d) experiments, short-term experiments indicate that kinetic isotope effects dominate during rapid precipitation of ferric oxides. Precipitation of hematite over ∼12 h produces a kinetic isotope fractionation where 10³lnα_{Fe(III)-hematite} = +1.32 ± 0.12‰. Precipitation under nonequilibrium conditions, however, can be recognized through stepwise dissolution in concentrated acids. As expected, our results demonstrate that dissolution by itself does not measurably fractionate Fe isotopes.  相似文献   

Iron reduction and alteration of nontronite NAu-2 by a sulfate-reducing bacterium     

Yi-Liang Li  S.Kelly Sears  Baolin Deng 《Geochimica et cosmochimica acta》2004,68(15):3251-3260

Iron-rich clay minerals are abundant in the natural environment and are an important source of iron for microbial metabolism. The objective of this study was to understand the mechanism(s) of enhanced reduction of Fe(III) in iron-rich 2:1 clay minerals under sulfate-reducing conditions. In particular, biogenic reduction of structural Fe(III) in nontronite NAu-2, an Fe-rich smectite-group mineral, was studied using a Desulfovibrio spp. strain G-11 with or without amended sulfate. The microbial production of Fe(II) from NAu-2 is about 10% of total structural Fe(III) (30 mM) when Fe(III) is available as the sole electron acceptor. The measured production of Fe(II), however, can reach 29% of the total structural Fe(III) during sulfate reduction by G-11 when sulfate (50 mM) is concurrently added with NAu-2. In contrast, abiotic production of Fe(II) from the reaction of NAu-2 with Na₂S (50 mM) is only ca. 7.5% of the total structural Fe(III). The enhanced reduction of structural Fe(III) by G-11, particularly in the presence of sulfate, is closely related to the growth rate and metabolic activities of the bacteria. Analyses by X-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy reveal significant changes in the structure and composition of NAu-2 during its alteration by bacterial sulfate reduction. G-11 can also derive nutrients from NAu-2 to support its growth in the absence of amended minerals and vitamins. Results of this study suggest that sulfate-reducing bacteria may play a more significant role than previously recognized in the cycling of Fe, S, and other elements during alteration of Fe-rich 2:1 clay minerals and other silicate minerals.  相似文献   

Iron isotope compositions of carbonatites record melt generation, crystallization, and late-stage volatile-transport processes   总被引：2，自引：0，他引：2  

Clark M. Johnson  Keith Bell  Brian L. Beard  Aaron I. Shultis 《Mineralogy and Petrology》2010,98(1-4):91-110

Carbonatites define the largest range in Fe isotope compositions yet measured for igneous rocks, recording significant isotopic fractionations between carbonate, oxide, and silicate minerals during generation in the mantle and subsequent differentiation. In contrast to the relatively restricted range in δ⁵⁶Fe values for mantle-derived basaltic magmas (δ⁵⁶Fe?=?0.0?±?0.1‰), calcite from carbonatites have δ⁵⁶Fe values between ?1.0 and +0.8‰, similar to the range defined by whole-rock samples of carbonatites. Based on expected carbonate-silicate fractionation factors at igneous or mantle temperatures, carbonatite magmas that have modestly negative δ⁵⁶Fe values of ~ ?0.3‰ or lower can be explained by equilibrium with a silicate mantle. More negative δ⁵⁶Fe values were probably produced by differentiation processes, including crystal fractionation and liquid immiscibility. Positive δ⁵⁶Fe values for carbonatites are, however, unexpected, and such values seem to likely reflect interaction between low-Fe carbonates and Fe³⁺-rich fluids at igneous or near-igneous temperatures; the expected δ⁵⁶Fe values for Fe²⁺-bearing fluids are too low to produced the observed positive δ⁵⁶Fe values of some carbonatites, indicating that Fe isotopes may be a valuable tracer of redox conditions in carbonatite complexes. Further evidence for fluid-rock or fluid-magma interactions comes from the common occurrence of Fe isotope disequilibrium among carbonate, oxide, silicate, and sulfide minerals in the majority of the carbonatites studied. The common occurrence of Fe isotope disequilibrium among minerals in carbonatites may also indicate mixing of phenocyrsts from distinct magmas. Expulsion of Fe³⁺-rich brines into metasomatic aureols that surround carbonatite complexes are expected to produce high-δ⁵⁶Fe fenites, but this has yet to be tested.  相似文献   

Crystal field spectra and jahn teller effect of Mn3+ in clinopyroxene and clinoamphiboles from India     

S. Ghose  M. Kersten  K. Langer  G. Rossi  L. Ungaretti 《Physics and Chemistry of Minerals》1986,13(5):291-305

Blanfordite (I), winchite (II), and juddite (III), all showing vivid colors and pleochroism, from highly oxidized parageneses of Indian gondites were studied by microprobe, Mössbauer, and microscope-spectrophotometric techniques and by X-ray structure refinements. The compositions of the Mn-bearing minerals were close to diopsideacmite (I) and magnesio-arfvedsonite to magnesio-riebeckite (II and III). Transition metal ions are located inM(1)-octahedra (I) or predominantlyM(2)-octahedra (II, III). Mössbauer spectra of⁵⁷Fe(IS, ΔE _Q) are typical of octahedral Fe³⁺ only. Polarized absorption spectra in the UV/VIS/NIR ranges explain color and pleochroism of the minerals. The position of the UV-“edge” is correlated with Fe³⁺-contents of the minerals, except for judditeE ∥Z, where the edge shows an unusual low energy position. This is most likely due to Mie-scattering of submicroscopic inclusions of braunite with nearly uniform dimensions. In the VIS range, the spectra are dominated by a complex band system between 15,000 and 20,000 cm^?1. Energies and ?-values of component bands are compatible with those of Mn³⁺ d-d transitions in other Mn³⁺-bearing silicates. The polarization behavior of component bands can best be explained by aC ₂(C2″) symmetry of the crystal field. The Jahn-Teller splitting (<9,000 cm^?1) of the⁵ E _g ground state of Mn³⁺ inO _h crystal fields is appreciably smaller than in other Mn³⁺-silicates. Crystal field parameters 10Dq, (I) 13,650, (II) ca. 11,640, and (III) 11,925 cm^?1, are near to that in piemontite. The crystal field stabilization energy of Mn³⁺, (I) 146, (II) ca. 140, (III) 142 \({{{\text{kJ}}} \mathord{\left/ {\vphantom {{{\text{kJ}}} {\text{g}}}} \right. \kern-0em} {\text{g}}}{\text{ - atom}}_{{\text{Mn}}^{{\text{3 + }}} } \) , is appreciably smaller than that found in other Mn³⁺-silicates (piemontites and manganian andalusites, viridines and kanonaite).  相似文献   

57Fe and 119Sn Mössbauer studies of natural tin-bearing garnets     

G. Amthauer  J. R. McIver  E. A. Viljoen 《Physics and Chemistry of Minerals》1979,4(3):235-244

The Mössbauer spectra of ¹¹⁹Sn and ⁵⁷Fe in three natural and a synthetic garnet were studied between 20 and 300 K. These spectra reveal the presence of octahedral Sn⁴⁺ as well as octahedral Fe³⁺ and Fe²⁺. Sn²⁺ could not be detected. On the basis of these results the following cation substitution can be derived for the tin-bearing Silicate garnets of this study: Sn⁴⁺ (oct)+Fe²⁺ (oct) ? 2 Fe³⁺ (oct).  相似文献