共查询到20条相似文献，搜索用时 387 毫秒
1.
The paper is concerned with shear localization in the form of a spontaneous shear zone inside a granular material during a plane strain compression test. The influence of an initial void ratio, pressure and a mean grain diameter on the thickness of a shear zone is investigated. A plane strain compression test with dry sand is numerically modelled with a finite element method taking into account a polar hypoplastic constitutive relation which was laid down within a polar (Cosserat) continuum. The relation was obtained through an extension of a non-polar hypoplastic constitutive law according to Gudehus and Bauer by polar quantities: rotations, curvatures, couple stresses and a characteristic length. It can reproduce the essential features of granular bodies during shear localization. The material constants can be easily calibrated. The FE-calculations demonstrate an increase in the thickness of the shear zone with increasing initial void ratio, pressure level and mean grain diameter. Polar effects manifested by the appearance of grain rotations and couple stresses are only significant in the shear zone. A comparison between numerical calculations and experimental results shows a satisfying agreement. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
2.
In this work, the interface behavior between an infinite extended narrow granular layer and a rough surface of rigid body is investigated numerically, using finite element method in the updated Lagrangian (UL) frame. In this regard, the elasto‐plastic micro‐polar (Cosserat) continuum approach is employed to remove the limitations caused by strain‐softening of materials in the classical continuum. The mechanical properties of cohesionless granular soil are described with Lade's model enhanced by polar terms, including Cosserat rotations, curvatures, and couple stresses. Furthermore, the mean grain diameter as the internal length is incorporated into the constitutive relations accordingly. Here, the evolution and location of shear band, within the granular layer in contact with the rigid body, are mainly focused. In this regard, particular attention is paid to the effects of homogeneous distribution and periodic fluctuation of micro‐polar boundary conditions, prescribed along the interface. Correspondingly, the effects of pressure level, mean grain diameter, and stratified soil are also considered. The finite element results demonstrate that the location and evolution of shear band in the granular soil layer are strongly affected by the non‐uniform micro‐polar boundary conditions, prescribed along the interface. It is found that the shear band is located closer to the boundary with less restriction of grain rotations. Furthermore, the predicted thickness of shear band is larger for higher rotation resistance of soil grains along the interface, larger mean grain diameter, and higher vertical pressure. Regarding the stratified soil, comprising a thin layer with slightly different initial void ratio, the shear band moves towards the layer with initially higher void ratio. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
The behaviour of dry and cohesionless granular material during quasi-static cyclic shearing under a constant normal stiffness (CNS) condition is theoretically studied. A particular attention is laid to the volumetric strain change and the degradation of the shear resistance in the course of shearing. Numerical calculations are carried out for several shear cycles under boundary conditions which are relevant to investigate the shear interface behaviour. The global and local evolution of deformation, stress and density within the granular material is investigated with a finite element method on the basis of a hypoplastic constitutive model extended by micro-polar quantities: rotations, curvatures and couple stresses. A mean grain diameter is used as a characteristic length of micro-structure. The constitutive equations for stresses and couple stresses take also into account the effect of the evolution of the void ratio, pressure dependent relative density, direction of rate of deformation and rate of curvature. The numerical results are qualitatively compared with corresponding laboratory tests on direct wall shearing performed by DeJong, Randloph and White. In addition, the results for cyclic shearing of an infinite granular layer between two very rough boundaries under CNS conditions are also enclosed and discussed. 相似文献
4.
In this paper a micro‐polar continuum approach is proposed to model the essential properties of cohesionless granular materials like sand. The model takes into account the influence of particle rotations, the mean grain size, the void ratio, the stresses and couple stresses. The constitutive equations for the stresses and couple stresses are incrementally non‐linear and based on the concept of hypoplasticity. For plane strain problems the implementation of the model in a finite element program is described. Numerical studies of the evolution of micro‐polar effects within a granular strip under plane shearing are presented. It is shown that the location and evolution of shear localization is strongly influenced by the initial state and the micro‐polar boundary conditions. For large shearing the state quantities tend towards a stationary state for which a certain coupling between the norm of the stress deviator and the norm of the couple stress tensor can be derived. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
5.
The paper deals with numerical investigations of a deterministic and statistical size effect in granular bodies during quasi‐static shearing of an infinite layer under plane strain conditions, free dilatancy and constant pressure. For a simulation of the mechanical behaviour of a cohesionless granular material during a monotonous deformation path, a micro‐polar hypoplastic constitutive relation was used which takes into account particle rotations, curvatures, non‐symmetric stresses, couple stresses and the mean grain diameter as a characteristic length. The proposed model captures the essential mechanical features of granular bodies in a wide range of densities and pressures with a single set of constants. In the paper, a deterministic and statistical size effect is analysed. The deterministic calculations were carried out with an uniform distribution of the initial void ratio for four different heights of the granular layer: 5, 50, 500 and 2000 mm. To investigate the statistical size effect, the Monte Carlo method was applied. The random distribution of the initial void ratio was assumed to be spatially correlated. Truncated Gaussian random fields were generated in a granular layer using an original conditional rejection method. The sufficient number of samples was determined by analysing the convergence of the outcomes. In order to reduce the number of realizations without losing the accuracy of the calculations, stratified and Latin hypercube methods were applied. A parametric analysis of these methods was also presented. Some general conclusions were formulated. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
6.
This article deals with the effect of grain crushing on shear localization in granular materials during plane strain monotonic compression tests under constant lateral pressure. The grain diameter and the initial void ratio were stochastically distributed using a spatial correlation. To describe the mechanical behavior of cohesionless granular materials during a monotonic deformation path in plane strain compression, we used a micropolar hypoplastic constitutive model that is able to describe the salient properties of granular bodies including shear localization. The model was extended by introducing changes to the grain diameter with varying pressure using formulae from breakage mechanics proposed for crushable granulates. The initial void ratios and grain diameters took the form of correlated random spatial fields described by both symmetric and nonsymmetric random distributions using a homogeneous correlation function. The field realizations were generated with the help of an original conditional rejection method. A few representative samples of the random fields selected from the generated set were taken into account in numerical calculations. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
7.
This paper focuses on the influence of the initial void ratio on the evolution of the passive earth pressure and the formation
of shear zones in a dry sand body behind a retaining wall. For the numerical simulation a rigid and very rough retaining wall
undergoing a horizontal translation against the backfill is considered. The essential mechanical properties of cohesionless
granular soil are described with a micro-polar hypoplastic model which takes into account stresses and couple stresses, pressure
dependent limit void ratios and the mean grain size as a characteristic length. Numerical investigations are carried out with
an initially medium dense and initially loose sand using a homogeneous and random distribution of the initial void ratio.
The geometry of calculated shear zones is discussed and compared with a corresponding laboratory model test. 相似文献
8.
This paper deals with FE investigations of shear localization in dilatant granular bodies. The calculations were carried out with a hypoplastic constitutive law enhanced by micro‐polar terms to properly model the shear zone evolution. The behaviour of an initially medium dense sand specimen with very smooth and very rough horizontal boundaries was analyzed during a plane strain compression test. A stochastic distribution of the initial void ratio was assumed to be spatially correlated. Attention was focused on the non‐coaxiality of the directions of the principal strain increments and principal stresses in the shear zone and on the stress–dilatancy rule. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
9.
The numerical simulation of rapid landslides is quite complex mainly because constitutive models capable of simulating the mechanical behaviour of granular materials in the pre‐collapse and post‐collapse regimes are still missing. The goal of this paper is to introduce a constitutive model capable of capturing the response of dry granular flows from quasi‐static to dynamic conditions, in particular when the material experiences a sort of solid‐to‐fluid phase transition. An ideal assembly of identical spheres under simple shear conditions is considered. In the constitutive model, void ratio and granular temperature have been chosen as state variables, and both shear and normal stresses are computed as the sum of two contributions: the quasi‐static one and the collisional one. The former is determined by using a perfect elasto‐plastic model including the critical state concept, while the latter is derived from the kinetic theory of granular gases. The evolution of the granular temperature, fundamentally governing the material phase transition, is obtained by imposing the kinetic fluctuating energy balance. The constitutive relationship has been integrated, under both constant pressure and constant volume conditions, and the influence of shear strain rate, initial void ratio and normal pressure on the mechanical response has been investigated. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
Experimental and numerical studies on and sand–steel interfaces are presented. Emphasis is laid on the effect of boundary conditions of the whole system and of localized deformation. The experiments with different roughness of steel surface, sand density, normal stress and grain size are carried out in a plane strain apparatus, a parallely guided direct shear apparatus and in a planar silo model with a movable bottom and parallel steel walls. During the test in the plane strain apparatus the localized zone is observed with the help of X-rays. The results indicate a significant effect of wall roughness and boundary conditions of the whole system on the wall friction angle and the thickness of the localized zone along the steel surface. An elastoplastic constitutive model established within the framework of a Cosserat continuum, capable of describing isotropic hardening, softening and dilatancy, is implemented in a finite element code. The model differs from the conventional theory of plasticity due to the presence of Cosserat rotation and couple stress using the mean grain diameter as the characteristic length. Finite element simulations of simple shear tests are presented. The additional boundary condition along the steel plate, characteristic of the Cosserat continuum, allows for modelling the different roughness of the steel plate with consideration of grain rotations. A comparison between the numerical calculations and the experimental results shows acceptable agreement. 相似文献
11.
The undrained shear behaviour of sands has been a key topic after the devastating geo-disasters during the 1964 Niigata Earthquake
in Japan. Extensive geo-technical soil tests, especially undrained triaxial compression tests, have revealed that the liquefaction
phenomenon was the major cause for the disaster expansions. To numerically reproduce the liquefaction phenomenon, the pore-water
pressure was coupled with a distinct element method. In this model, the dynamic changes in pore-water pressure were taken
into consideration by the changes in volumetric strain and modulus of compressibility of water in the respective measurement
spheres. Fluid-flows among the measurement spheres were controlled by Darcy’s law. The effective stress paths and steady state
strengths in undrained triaxial compression tests associated with the wide ranges of initial void ratio were investigated.
The effective mean stresses of medium-dense to dense numerical specimens at the steady state were negatively proportional
to the initial void ratio. Loose numerical specimens reproduced quasi-liquefaction with the effective mean stresses that were
less than 25% of the initial value. The medium-dense numerical specimens reproduced the phase transformation that was a typical
characteristic of granular materials. The rolling restraints did not much influence of the effective angle of internal friction
but strongly affected pore-water pressure behaviour within a certain range of initial void ratio. 相似文献
12.
Finite element study of patterns of shear zones in granular bodies during plane strain compression 总被引：1，自引：1，他引：0
Numerical investigations of patterns of shear zones in granular bodies obtained during quasi-static plane strain compression
tests were performed. The effect of a spatially correlated stochastic distribution of the initial void ratio and roughness
of horizontal plates was analyzed. To describe a mechanical behavior of a cohesionless granular material during a monotonic
deformation path in a plane strain compression test, a micro-polar hypoplastic constitutive model was used. FE calculations
were carried out with both initially dense and initially loose cohesionless sand. A Latin hypercube method was applied to
generate Gaussian truncated random fields of initial void ratio in a granular specimen. A weak correlation of the initial
void ratio in both directions and its large standard deviation were assumed for all specimens. The horizontal boundaries were
either ideally smooth or very rough. The FE results show similar patterns of shear zones as compared to experiments. 相似文献
13.
Recently, the shear behavior of a cohesionless granular strip that is in contact with a very rough surface of a moving bounding structure has been numerically investigated by several authors by using a micropolar hypoplastic continuum model. It was shown that the micropolar boundary conditions assumed along the interface have a strong influence on the deformations within the granular layer. In previous investigations, only interface friction angles for very rough bounding structures were assumed. In contrast, the focus of the present paper is on the influence of the interface roughness on the deformation behavior of the granular strip when the interface friction angle is lower than the peak friction angle of the granular material. In addition to the interface friction angle, particular attention is also paid to the influence of the mean grain diameter, the solid hardness, the initial void ratio, and the vertical stress on the maximum horizontal shear displacement within the granular layer before sliding is started. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
14.
Implementation and applications for a constitutive numerical model on F‐75 silica sand, course silica sand and two sizes of glass beads compressed under plane strain conditions are presented in this work. The numerical model is used to predict the stress versus axial strain and volumetric strain versus axial strain relationships of those materials; moreover, comparisons between measured and predicted shear band thickness and inclination angles are discussed and the numerical results compare well with the experimental measurements. The numerical model is found to respond to the changes in confining pressure and the initial relative density of a given granular material. The mean particle size is used as an internal length scale. Increasing the confining pressure and the initial density is found to decrease the shear band thickness and increase the inclination angle. The micropolar or Cosserat theory is found to be effective in capturing strain localization in granular materials. The finite element formulations and the solution method for the boundary value problem in the updated Lagrangian frame (UP) are discussed in the companion paper. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
15.
粗粒土的破碎耗能计算及影响因素 总被引：2，自引：1，他引：1
粗粒土的颗粒破碎直接改变了土体本身结构,对粗粒土的剪胀和内摩擦角都会产生影响。在土体剪切过程中,体积应力和剪切应力在体积应变和剪切应变上做功,这部分能量在剪切过程中转化为颗粒的弹性储能、颗粒间的摩擦耗能、颗粒剪胀时对外做功和颗粒破碎耗能4部分。准确计算剪切过程中粗粒土破碎耗能的目的是：从能量角度分析颗粒破碎对土体本构关系的影响,为建立考虑颗粒破碎的粗粒土本构关系创造条件。通过分析粗粒土的常规三轴试验数据,计算得到了剪切过程中的粗粒土破碎耗能。计算结果表明,常规三轴试验条件下粗粒土破碎耗能主要受固结应力、土体摩擦系数M等因素的影响。 相似文献
16.
Liquefaction is associated with the loss of mean effective stress and increase of the pore water pressure in saturated granular materials due to their contractive tendency under cyclic shear loading. The loss of mean effective stress is linked to loss of grain contacts, bringing the granular material to a “semifluidized state” and leading to development and accumulation of large cyclic shear strains. Constitutive modeling of the cyclic stress-strain response in earthquake-induced liquefaction and post-liquefaction is complex and yet very important for stress-deformation and performance-based analysis of sand deposits. A new state internal variable named strain liquefaction factor is introduced that evolves at low mean effective stresses, and its constitutive role is to reduce the plastic shear stiffness and dilatancy while maintaining the same plastic volumetric strain rate in the semifluidized state. This new constitutive ingredient is added to an existing critical state compatible, bounding surface plasticity reference model, that is well established for constitutive modeling of cyclic response of sands in the pre-liquefaction state. The roles of the key components of the proposed formulation are examined in a series of sensitivity analyses. Their combined effects in improving the performance of the reference model are examined by simulating undrained cyclic simple shear tests on Ottawa sand, with focus on reproducing the increasing shear strain amplitude as well as its saturation in the post-liquefaction response. 相似文献
17.
DEM study of fabric features governing undrained post-liquefaction shear deformation of sand 总被引：3，自引：3，他引：0
In an effort to study undrained post-liquefaction shear deformation of sand, the discrete element method (DEM) is adopted to conduct undrained cyclic biaxial compression simulations on granular assemblies consisting of 2D circular particles. The simulations are able to successfully reproduce the generation and eventual saturation of shear strain through the series of liquefaction states that the material experiences during cyclic loading after the initial liquefaction. DEM simulations with different deviatoric stress amplitudes and initial mean effective stresses on samples with different void ratios and loading histories are carried out to investigate the relationship between various mechanics- or fabric-related variables and post-liquefaction shear strain development. It is found that well-known metrics such as deviatoric stress amplitude, initial mean effective stress, void ratio, contact normal fabric anisotropy intensity, and coordination number, are not adequately correlated to the observed shear strain development and, therefore, could not possibly be used for its prediction. A new fabric entity, namely the Mean Neighboring Particle Distance (MNPD), is introduced to reflect the space arrangement of particles. It is found that the MNPD has an extremely strong and definitive relationship with the post-liquefaction shear strain development, showing MNPD’s potential role as a parameter governing post-liquefaction behavior of sand. 相似文献
18.
剪胀性是颗粒材料在加载过程中表现出来的重要变形特性。以孔隙胞元描述颗粒材料内部结构的最小单元,通过对单个孔隙胞元进行剪切受力分析,探讨了剪切过程中颗粒材料体积的改变对应力比和单个孔隙胞元形状的依赖关系,解释了排列密实的颗粒材料在剪切过程中先压缩后剪胀的微观机制。用离散元数值模拟得到了在双轴剪切过程中单个孔隙胞元形状以及孔隙胞元体积变形的演化过程。离散元数值结果表明,加载过程中孔隙胞元形状由初始各向同性到沿大主应力方向变大变长、体积变形先压缩后膨胀,并且体积变形在加载过程中存在局部化现象,体积变化大的孔隙胞元在较大变形时,排列成倾斜的窄带。综合孔隙胞元的受力分析和离散元数值结果表明,致密排列颗粒材料的剪胀性与微观尺度上孔隙胞元的几何结构及其内部的力链传递方式密切相关。 相似文献
19.
In this paper, we consider the mechanical response of granular materials and compare the predictions of a hypoplastic model with that of a recently developed dilatant double shearing model which includes the effects of fabric. We implement the constitutive relations of the dilatant double shearing model and the hypoplastic model in the finite element program ABACUS/Explicit and compare their predictions in the triaxial compression and cyclic shear loading tests. Although the origins and the constitutive relations of the double shearing model and the hypoplastic model are quite different, we find that both models are capable of capturing typical behaviours of granular materials. This is significant because while hypoplasticity is phenomenological in nature, the double shearing model is based on a kinematic hypothesis and microstructural considerations, and can easily be calibrated through standard tests. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
20.
Excess pore pressure and grain crushing of sands by means of undrained and naturally drained ring-shear tests 总被引：5，自引：0，他引：5
An investigation of excess pore-pressure generation of a weathered granitic sand, taken from the source area of a typical landslide caused as a result of liquefaction, and a fine silica sand was conducted, in which grain crushing within the shear zone of ring-shear test specimens was examined as the key phenomenon of rapid long-runout motion of landslides. In order to investigate and explain the low average apparent-friction angle, mobilized in a liquidized landslide, speed-controlled ring-shear tests were conducted under undrained conditions on weathered granitic-sand specimens, formed under a wide range of initial void ratios. It was revealed that very small steady-state shear resistances were obtained irrespective of the initial void ratios, which can explain the low average apparent-friction angle. In addition, two series of ring-shear tests on weathered-granitic and fine-silica sands were conducted under naturally drained conditions by keeping the upper drain valve of the shear box open during the tests. The first series of tests was performed under differing total normal stresses, but at the same shear speed, and the second series was conducted at differing shear speeds, but under the same total normal stress. In order to investigate and analyze excess pore-pressure generation and dissipation within the shear zone that is associated with grain crushing, permeability analyses were conducted by passing water through the sample box of the ring-shear test apparatus before and after shearing. In addition, grain-size distribution analyses of samples taken from the shear zone after shearing were carried out. For the weathered granitic-sand samples, a significant change in bulk permeability and large amount of grain crushing were observed. In these tests on the above soil, a considerable reduction of shear resistance, which increased proportionally to the total normal stress and shear speed, were obtained. It was observed that due to grain crushing, finer grains that lowered the permeability of the soil in the shear zone, were formed. It is likely that the decrease in permeability facilitated the generation of high excess pore pressures by reducing the pore-pressure dissipation rate from the shear zone; thus, flow behaviour was exhibited even under naturally drained conditions. 相似文献