首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
The rare calc‐silicate minerals cuspidine, bultfonteinite, foshagite and xonotlite occur in a calcsilicate skarn zone near Chesney Vale, in northern Victoria. They are associated with andradite-grossular garnet, vesuvianite, diopside, wollastonite, prehnite, epidote, fluorite, calcite, perovskite,sphene and possibly tobermorite. The calc‐silicate skarn zone has formed in thermally meta‐morphosed, Ordovician, deep‐marine sediments adjacent to an Early Devonian aplitic granite pluton. The assemblages are estimated to have formed at low pressure (<100 MPa) at temperaturesnot exceeding 600°C in the presence of a low‐Xco2 fluorine‐bearing fluid. The occurrence is the firstrecord of bultfonteinite and foshagite in Australia and the first record of cuspidine and xonotlite inVictoria.  相似文献   

2.
Abundant iron oxide deposits including banded iron formations, apatite iron oxide ores, and enigmatic marble/skarn-hosted magnetite deposits occur in the Palaeoproterozoic Bergslagen region, southern Sweden. During the last 100 years, the latter deposit class has been interpreted as contact metasomatic skarn deposits, metamorphosed iron formations, or metamorphosed carbonate replacement deposits. Their origin is still incompletely understood. At the Smältarmossen mine, magnetite was mined from a ca. 50-m-thick calcic skarn zone at the contact between rhyolite and stratigraphically overlying limestone. A syn-volcanic dacite porphyry which intruded the footwall has numerous apophyses that extend into the mineralized zone. Whole-rock lithogeochemical and mineral chemical analyses combined with textural analysis suggests that the skarns formed by veining and replacement of the dacite porphyry and rhyolite. These rocks were added substantial Ca and Fe, minor Mg, Mn, and LREE, as well as trace Co, Sn, U, As, and Sr. In contrast, massive magnetite formed by pervasive replacement of limestone. Tectonic fabrics in magnetite and skarn are consistent with ore formation before or early during Svecokarelian ductile deformation. Whereas a syngenetic–exhalative model has previously been suggested, our results are more compatible with magnetite formation at ca. 1.89 Ga in a contact metasomatic skarn setting associated with the dacite porphyry.  相似文献   

3.
The newly discovered Handagai skarn Fe–Cu deposit is located in the northern Great Xing'an Range of NE China and is hosted by the Ordovician Luohe Formation. The orebodies that form the deposit are generally concordant with the bedding within these sediments, and are spatially related to areas of skarn development. The Fe–Cu mineralization in this area records four stages of paragenesis, namely prograde skarn, retrograde skarn, quartz–sulfide, and quartz–carbonate stages. The Handagai deposit is a calcic skarn that is dominated by an andradite–diopside–epidote–actinolite assemblage. The mineralogy and geochemistry of the skarn indicate that it formed from a hydrothermal fluid that altered the carbonate units in this area to a garnet (And42–95Grs4–53) and pyroxene (Di71–78Hd22–29Jo0–2) bearing skarn. The epidote within the skarn has an epidote end-member composition, with the chlorite in the skarn dominantly Fe-rich, indicating that these minerals formed in an Fe-rich environment. The petrographic, microthermometric, and Raman spectroscopic analysis of fluid inclusions within garnet, epidote, actinolite, quartz, and calcite precipitated at different stages of formation of the Handagai deposit indicate that mineralization-related fluid inclusions are either liquid-rich two-phase H2O–NaCl (type I), gas-rich two-phase H2O–NaCl (type II), three-phase (liquid + vapor + solid) H2O–NaCl (type III), or CO2–H2O–NaCl inclusions (type IV). The early stages of mineralization are associated with all four types of inclusion, whereas the later stages of mineralization are only associated with type I and II inclusions. Inclusion homogenization temperatures vary between the four stages of mineralization (370 °C–530 °C and > 600 °C, 210 °C–290 °C, 190 °C–270 °C, and 150 °C–230 °C, from early to late, respectively), with salinities also varying between the earlier and later stages of mineralization (11–18 and > 45, 7–15, 6–9, and 3–7 wt.% NaCl equivalent (equiv.), respectively). The majority of the inclusions within the Handagai deposit have homogenization temperatures and salinities of 200 °C–350 °C and 4–14 wt.% NaCl equiv., respectively, indicating that this is a medium–high temperature and medium–low salinity type deposit. The fluid inclusions were trapped at pressures of 11 to 72 MPa, corresponding to depths of 0.4 to 2.9 km. The geology, mineralogy, geochemistry, and fluid inclusions microthermometry indicate that the Handagai deposit formed as a result of contact infiltration metasomatism, with the deposition of ore minerals resulting from a combination of factors that include boiling as a result of reduced pressure, cooling, and fluid mixing.  相似文献   

4.
Bangpu deposit in Tibet is a large but poorly studied Mo-rich (~ 0.089 wt.%), and Cu-poor (~ 0.32 wt.%) porphyry deposit that formed in a post-collisional tectonic setting. The deposit is located in the Gangdese porphyry copper belt (GPCB), and formed at the same time (~ 15.32 Ma) as other deposits within the belt (12 ~ 18 Ma), although it is located further to the north and has a different ore assemblage (Mo–Pb–Zn–Cu) compared to other porphyry deposits (Cu–Mo) in this belt. Two distinct mineralization events have been identified in the Bangpu deposit which are porphyry Mo–(Cu) and skarn Pb–Zn mineralization. Porphyry Mo–(Cu) mineralization in the deposit is generally associated with a mid-Miocene porphyritic monzogranite rock, whereas skarn Pb–Zn mineralization is hosted by lower Permian limestone–clastic sequences. Coprecipitated pyrite and sphalerite from the Bangpu skarn yield a Rb–Sr isochron age of 13.9 ± 0.9 Ma. In addition, the account of garnet decreases and the account of both calcite and other carbonate minerals increases with distance from the porphyritic monzogranite, suggesting that the two distinct phases of mineralization in this deposit are part of the same metallogenic event.Four main magmatic units are associated with the Bangpu deposit, namely a Paleogene biotite monzogranite, and Miocene porphyritic monzogranite, diabase, and fine-grained diorite units. These units have zircon U–Pb ages of 62.24 ± 0.32, 14.63 ± 0.25, 14.46 ± 0.38, and 13.24 ± 0.04 Ma, respectively. Zircons from porphyritic monzogranite yield εHf(t) values of 2.2–8.7, with an average of 5.4, whereas the associated diabase has a similar εHf(t) value averaging at 4.7. The geochemistry of the Miocene intrusions at Bangpu suggests that they were derived from different sources. The porphyritic monzogranite has relatively higher heavy rare earth element (HREE) concentrations than do other ore-bearing porphyries in the GPCB and plots closer to the amphibolite lithofacies field in Y–Zr/Sm and Y–Sm/Yb diagrams. The Bangpu diabase contains high contents of MgO (> 7.92 wt.%), FeOt (> 8.03 wt.%) but low K2O (< 0.22 wt.%) contents and with little fractionation of the rare earth elements (REEs), yielding shallow slopes on chondrite-normalized variation diagrams. These data indicate that the mineralized porphyritic monzogranite was generated by partial melting of a thickened ancient lower crust with some mantle components, whereas the diabase intrusion was directly derived from melting of upwelling asthenospheric mantle. An ancient lower crustal source for ore-forming porphyritic monzogranite explains why the Bangpu deposit is Mo-rich and Cu-poor rather than the Cu–Mo association in other porphyry deposits in the GPCB because Mo is dominantly from the ancient crust.The Bangpu deposit has alteration zonation, ranging from an inner zone of biotite alteration through silicified and phyllic alteration zones to an outer propylitic alteration zone, similar to typical porphyry deposits. Some distinct differences are also present, for example, K-feldspar alteration at Bangpu is so dispersed that a distinct zone of K-feldspar alteration has not been identified. Hypogene mineralization at Bangpu is characterized by the early-stage precipitation of chalcopyrite during biotite alteration and the late-stage deposition of molybdenite during silicification. Fluid inclusion microthermometry indicates a change in ore-forming fluids from high-temperature (320 °C–550 °C) and high-salinity (17 wt.%–67.2 wt.%) fluids to low-temperature (213 °C–450 °C) and low-salinity (7.3 wt.%–11.6 wt.%) fluids. The deposit has lower δDV-SMOW (− 107.1‰ to − 185.8‰) values compared with other porphyry deposits in the GPCB, suggesting that the Bangpu deposit formed in a shallower setting and is associated with a more open system than is the case for other deposits in this belt. Sulfides at Bangpu yield δ34SV-CDT values of − 2.3‰ to 0.3‰, indicative of mantle-derived S implying that coeval mantle-derived mafic magma (e.g., diabase) simultaneously supplied S and Cu to the porphyry system at Bangpu. In comparison, the Pb isotopic compositions (206Pb/204Pb = 18.79–19.28, 207Pb/204Pb = 15.64–15.93, 208Pb/204Pb = 39.16–40.45) of sulfides show that other metals (e.g., Mo, Pb, Zn) were likely derived mainly from an ancient crustal source. Therefore, the formation of the Bangpu deposit can be explained by a two-stage model involving (1) the partial melting of an ancient lower crust triggered by invasion of asthenospheric mantle-derived mafic melts that provide heat and metal Cu and (2) the formation of the Bangpu porphyry Mo–Cu system, formed by magmatic differentiation in the overriding crust in a post-collisional setting.  相似文献   

5.
The central zone of the Miocene Štiavnica stratovolcano hosts several occurrences of Cu–Au skarn–porphyry mineralisation, related to granodiorite/quartz–diorite porphyry dyke clusters and stocks. Vysoká–Zlatno is the largest deposit (13.4 Mt at 0.52% Cu), with mineralised Mg–Ca exo- and endoskarns, developed at the prevolcanic basement level. The alteration pattern includes an internal K- and Na–Ca silicate zone, surrounded by phyllic and argillic zones, laterally grading into a propylitic zone. Fluid inclusions in quartz veinlets in the internal zone contain mostly saline brines with 31–70 wt.% NaCl eq. and temperatures of liquid–vapour homogenization (Th) of 186–575°C, indicating fluid heterogenisation. Garnet contains inclusions of variable salinity with 1–31 wt.% NaCl eq. and Th of 320–360°C. Quartz–chalcopyrite veinlets host mostly low-salinity fluid inclusions with 0–3 wt.% NaCl eq. and Th of 323–364°C. Data from sphalerite from the margin of the system indicate mixing with dilute and cooler fluids. The isotopic composition of fluids in equilibrium with K-alteration and most skarn minerals (both prograde and retrograde) indicates predominantly a magmatic origin (δ18Ofluid 2.5–12.3‰) with a minor meteoric component. Corresponding low δDfluid values are probably related to isotopic fractionation during exsolution of the fluid from crystallising magma in an open system. The data suggest the general pattern of a distant source of magmatic fluids that ascended above a zone of hydraulic fracturing below the temperature of ductile–brittle transition. The magma chamber at ∼5–6 km depth exsolved single-phase fluids, whose properties were controlled by changing PT conditions along their fluid paths. During early stages, ascending fluids display liquid–vapour immiscibility, followed by physical separation of both phases. Low-salinity liquid associated with ore veinlets probably represents a single-phase magmatic fluid/magmatic vapour which contracted into liquid upon its ascent.  相似文献   

6.
The danburite orebody at the northeastern wall of the open pit of the Dal’negorsk borosilicate deposit is studied. The comparative mineralogical-, isotopic-, and thermobarogeochemical analyses of danburite from the Levoberezhnyi area and datolite of the late skarn stage from the Tsentral’nyi open pit confirms that danburite is a result of the early borosilicate stage of formation of the deposit. Combined with previously published data, it is concluded that marine sedimentary rocks or Early Cretaceous arkose sandstones from the matrix of the Taukhin accretionary prism could be the source of boron.  相似文献   

7.
P–T conditions during skarn formation in the 75.5 Ma old Ocna de Fier-Dognecea (SW Romania) ore district are assessed in this work using a combination of petrogenetic grids, Berman's TWEEQU programme, and several independent geothermobarometers. These were applied both to hornfelses surrounding the skarn and to the granodiorite which caused the skarn and contact metamorphism. The results are consistent and point to a peak metamorphic temperature of 700 ± 50 °C, decreasing away from the contact, and to a pressure of 2.8 ± 1 kbar, equivalent to ∼10 km depth in the region. These results quantify the qualitative idea that skarn mineralisation normally forms in a high T, low P contact metamorphic environment. Received: 13 February 1998 / Accepted: 8 April 1999  相似文献   

8.
An extensive complex zoned skarn is developed at the contact of a leucoadamellite intrusive at Doradilla, NW New South Wales. The skarn is a disequilibrium assemblage resulting from a progressive sequence of replacement of a carbonate precursor. Early grossular‐clinopyroxene rocks are replaced by andradite with 0.5–3.5 wt.% SnO2 clinopyroxene and quartz. Later alteration along fractures and bedding planes of the garnet‐clinopyroxene quartz assemblage has produced calcite‐malayaite (CaSn0.95Ti0.05SiO5) veins. The final replacement stage was the overprinting of the silicate phases by assemblages containing sulphides, cassiterite, magnetite, titanite, fluorite, biotite and chlorite. The tin content of garent increases with increasing andradite component suggesting replacement of Fe3+ by Sn4+. Associated clinopyroxenes contain 0.1% SnO2. The coexistence of titanite and its tin isomorph malayaite with extremely limited solid solution indicates late stage skarn temperatures of less than 400°C.  相似文献   

9.
10.
The Beiya ore deposit is located in the northwestern Yangtze Block, to the southeast of the Tibetan Plateau, SW China. The deposit is hosted by a porphyritic monzogranitic stock that is cross-cut by a porphyritic granite and later lamprophyre dikes. The whole-rock geochemistry of the porphyritic monzogranite and granite intrusions is both potassic and adakite-like, as evidenced by high K2O/Na2O (2.2 to 24.8), Sr/Y (53.2 to 143.2), and (La/Yb)N (4.9 to 28.9) ratios. Both intrusions have comparable zircon U–Pb ages of ca. 36 Ma and εHf(t) values of − 6.8 to + 2.7. Zircons within these intrusions have Hf isotope crustal model ages with a prominent peak at ca. 840 Ma, and both of the intrusions have similar Sr–Nd–Pb isotopic compositions that are comparable to the compositions of amphibolite xenoliths hosted by potassic felsic intrusions in western Yunnan. The contemporaneous lamprophyre dikes show Nb–Ta depletion, enriched (87Sr/86Sr)i and εNd(t), and extremely low Nb/U ratios (1.6–3.6), suggesting that these dikes were formed from magmas generated by partial melting of a metasomatized subcontinental lithospheric mantle (SCLM). The geochemistry of the porphyritic intrusions and the lamprophyre dikes suggests that the Beiya porphyries formed as a result of partial melting of a thickened and K-rich region of the lower crust, triggered by melting of metasomatized SCLM. The ca. 840 Ma U–Pb ages and εHf(t) values (− 6.8 to + 2.7) of xenocrystic zircons within the porphyritic intrusions suggest that these zircons were produced in a continental arc setting at ca. 840 Ma. The peak Hf model age of the zircons crystallized from the intrusions and the U–Pb ages of the xenocrystic zircons within the intrusions suggest that these porphyritic intrusions formed from magmas sourced from a juvenile crust that formed at ca. 840 Ma. This juvenile crust is most likely the source for the metals within the porphyry–skarn deposits in the study area, as the SCLM-derived lamprophyre dikes in this area are barren.Massive Fe–Au orebodies (~ 99 million metric tons at an average grade of 2.61 g/t Au) within the study area are generally located within the skarn-altered boundary of the porphyritic monzogranite stock and along the faults in the surrounding Triassic carbonates. The Fe–Au orebodies are spatially and genetically associated with skarn comprising garnet and diopside. Petrographic observations show that the massive Fe–Au orebodies mainly consist of hematite and magnetite with disseminated pyrite that hosts native gold and electrum.The porphyritic granite contains porphyry-style mineralization in the form of disseminated and veinlet-hosted pyrite and chalcopyrite. Pyrite-hosted lattice-bound gold is present within both the massive Fe–Au and the porphyry-type mineralization in the study area, and is present at concentrations up to 10 ppm Au (as determined by in situ LA-ICP-MS analysis). Subsequent weathering altered the primary magnetite–hematite–sulfide assemblage in the Fe–Au orebody into a magnetite–limonite assemblage, and generated laterite-type mineralization in which gold is hosted by limonite.  相似文献   

11.
Thin- to medium-bedded, stratiform calc-silicate deposits (banded skarns) are a peculiar, but important, component of the supracrustal successions in the Palaeoproterozoic Bergslagen mining district of central Sweden. They are referred to as ??skarn-banded leptites?? in the literature and are common in areas and at stratigraphic levels that contain iron oxide and base metal sulphide deposits. The stratigraphic hanging wall of the stratabound Ryllshyttan Zn?CPb?CAg + magnetite deposit at Garpenberg, contains approximately 100?C150?m of interbedded aluminous skarn beds and rhyolitic ash-siltstones. The skarn beds are mineralogically variable and dominantly composed of grandite, spessartine, epidote, actinolite, quartz, clinopyroxene, and locally magnetite. Integrated field-mapping, and whole-rock lithogeochemical, microscopic and mineral chemical analyses suggest that the stratiform skarn beds are the products of at least two discrete hydrothermal events and subsequent metamorphism. The first event comprised accumulation in a quiescent subaqueous environment, below wave base, of calcareous and ferruginous sediments rich in Fe, Mn, Ca, and Mg. These chemical sediments were deposited concurrently with rhyolitic ash-silt sedimentation, thus forming a (now metamorphosed) laminated calcareous Fe formation with both a detrital rhyolitic component and rhyolitic siltstone interbeds. Positive Eu-anomalies and negative Ce-anomalies for normalized rare earth element analyses of skarn beds suggest that the iron may have been derived from exhalation of hot and reduced hydrothermal fluids, which upon mixing with more oxidized seawater, precipitated Fe oxides and/or carbonates that settled from suspension to the seafloor. The size of the positive Eu-anomalies of the chemical sediments are modified by the content of rhyolitic volcaniclastic material, which has a negative Eu anomaly, such that positive Eu-anomalies are only observed in skarn beds that possess a minor volcaniclastic component. Subsequently, the calcareous Fe formations were subjected to post-depositional alteration by hydrothermal fluids, locally yielding more manganoan and magnesian assemblages. The Mn-alteration is manifested by lateral gradations from epidote-grandite-clinopyroxene±magnetite rocks into significantly more Mn-rich quartz-spessartine rocks and massive andradite rocks over distances of less than 10?cm within individual skarn beds. Magnesian alteration is manifested by the development of discordant zones of pargasite para-amphibolites and formation of stratiform pargasite rocks texturally similar to the interlaminated grandite-epidote-ferroan diopside rocks. The latter increase in abundance towards the Ryllshyttan deposit and are associated with pre-metamorphic/pre-tectonic K?CMg?CFe±Si alteration (now biotite-phlogopite-garnet-cordierite-pargasite rocks) that is related to base metal mineralization. The zone of Mn- and Mg-altered skarn beds extends beyond the zone of pervasive K?CMg?CFe±Si alteration around Ryllshyttan. This suggests that the skarn bed progenitors, or their sedimentary contacts against rhyolitic ash-siltstones, acted as conduits to outflowing hydrothermal fluids. The chemical and mineralogical imprint, imposed on affected beds by alteration, may serve as indicators of proximity to intense K?CMg?CFe±Si alteration envelopes around other base metal sulphide deposits in Bergslagen. The last recorded event comprised syn-tectonic veining of competent massive andradite skarn beds. The veins contain quartz-albite-epidote-ferroan diopside-actinolite assemblages.  相似文献   

12.
The Bismark deposit (northern Chihuahua, Mexico) is one of several base metal-rich high-temperature, carbonate-replacement deposits hosted in northern Mexico. Previous fluid inclusion studies based on microthermometry and PIXE have shown that the Zn-rich, Pb-poor Bismark deposit formed from a moderate salinity magmatic fluid [Baker, T. and Lang, J.R., 2003. Reconciling fluid inclusion types, fluid processes, and fluid sources in skarns: an example from the Bismark Deposit, Mexico. Mineralium Deposita 38(4), 474–495; Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120]. The exact precipitation mechanisms are unclear and may have due to cooling, salinity decrease and wall rock reaction. Furthermore, PIXE data suggested that Pb and Zn concentrations were comparable and inconsistent with the Zn-rich nature of the ore. However, Pb was commonly below the limit of detection for PIXE and the data presented by Baker et al. [Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120] are regarded as the maximum concentrations of Pb in the fluid. In this study new LA ICP MS analysis was carried out on the same fluid inclusion population to compare with the PIXE data in order to constrain the uncertainty related to the Pb data and the new results are used to model possible ore deposition mechanisms. The new laser ablation data reveal overall lower concentrations of Pb in the ore fluid (average value ~ 285 ppm) than previously indicated by PIXE analysis (average value ~ 713 ppm). Chemical modelling using the new laser ablation data tested the following ore deposition processes: 1) cooling; 2) fluid–rock reaction at constant temperature; 3) cooling and simultaneous fluid–rock interaction. Modelling results show that the gangue and ore minerals observed at Bismark are best reproduced by fluid–rock interaction and simultaneous cooling. Results from the simulations strongly indicate that ore deposition was mainly driven by a pH increase due to the neutralization of the acidic ore fluid (pH = 3.9) as the result of the reaction with the limestone. Modelling results also suggest that the deposit likely formed under cooling conditions, but do not support the hypothesis of a temperature decrease as the principal ore-forming process.  相似文献   

13.
The Tonglushan Cu–Fe deposit (1.12 Mt at 1.61% Cu, 5.68 Mt at 41% Fe) is located in the westernmost district of the Middle–Lower Yangtze River metallogenic belt. As a typical polymetal skarn metallogenic region, it consists of 13 skarn orebodies, mainly hosted in the contact zone between the Tonglushan quartz-diorite pluton (140 Ma) and Lower Triassic marine carbonate rocks of the Daye Formation. Four stages of mineralization and alterations can be identified: i.e. prograde skarn formation, retrograde hydrothermal alteration, quartz-sulphide followed by carbonate vein formation. Electron microprobe analysis (EMPA) indicates garnets vary from grossular (Ad20.2–41.6Gr49.7–74.1) to pure andradite (Ad47.4–70.7Gr23.9–45.9) in composition, and pyroxenes are represented by diopsides. Fluid inclusions identify three major types of fluids involved during formation of the deposit within the H2O–NaCl system, i.e. liquid-rich inclusions (Type I), halite-bearing inclusions (Type II), and vapour-rich inclusions (Type III). Measurements of fluid inclusions reveal that the prograde skarn minerals formed at high temperatures (>550°C) in equilibrium with high-saline fluids (>66.57 wt.% NaCl equivalent). Oxygen and hydrogen stable isotopes of fluid inclusions from garnets and pyroxenes indicate that ore-formation fluids are mainly of magmatic-hydrothermal origin (δ18O = 6.68‰ to 9.67‰, δD = –67‰ to –92‰), whereas some meteoric water was incorporated into fluids of the retrograde alteration stage judging from compositions of epidote (δ18O = 2.26‰ to 3.74‰, δD= –31‰ to –73‰). Continuing depressurization and cooling to 405–567°C may have resulted in both a decrease in salinity (to 48.43–55.36 wt.% NaCl equivalent) and the deposition of abundant magnetite. During the quartz-sulphide stage, boiling produced sulphide assemblage precipitated from primary magmatic-hydrothermal fluids (δ18O = 4.98‰, δD = –66‰, δ34S values of sulphides: 0.71–3.8‰) with an extensive range of salinities (4.96–50.75 wt.% NaCl equivalent), temperatures (240–350°C), and pressures (11.6–22.2 MPa). Carbonate veins formed at relatively low temperatures (174–284°C) from fluids of low salinity (1.57–4.03 wt.% NaCl equivalent), possibly reflecting the mixing of early magmatic fluids with abundant meteoric water. Boiling and fluid mixing played important roles for Cu precipitation in the Tonglushan deposit.  相似文献   

14.
The Dal’negorsk borosilicate skarn deposit (44° 34′ N and 135° 37′ E), located in the center of the ore field bearing the same name, is referred to the category of giant deposits. The currently predominant genetic concept assumes that ore mineralization at this deposit is related to a mantle source and that boron and ore-bearing alkaline fluids are derivatives of a juvenile source as well. The alternative model considered in this paper suggests that sedimentary sequences, probably, evaporites of a local basin, were immediate boron sources and hot subsurface water served as an agent of ore deposition. The authors’ conclusions are based on (1) mineralogical and geochemical features of alteration of premineral dikes as evidence for the composition of percolating ore-bearing fluids, (2) results of fluid inclusion study, and (3) boron and oxygen isotopic compositions of datolite.The latite bodies immediately predating deposition of economic datolite ore do not show mineralogical or geochemical attributes of their belonging to alkaline rock series. According to our data, these bodies are composed of Paleogene premineral basalts that intruded into the future borosilicate deposit close to the central channel of ore-bearing fluid, served as fluid conduits, and were altered to ultrapotassic rocks under the effect of such fluid. It is suggested that hot aqueous ore-bearing fluid was enriched in highly soluble compounds of Ba, K, and B and extremely depleted in poorly soluble compounds of Zr, Nb, Ta, La, and Ce. This suggestion does not contradict the properties and composition of primary and pseudosecondary two-phase fluid inclusions in danburite, datolite, quartz, and fluorite from orebodies. Judging from the boron isotopic composition of datolite (δ11B = ?9 to ?31 ‰), the main amount of boron was extracted from metasedimentary rocks of the Mesozoic basement. The oxygen isotopic composition of datolite from the Dal’negorsk deposit (δ18OSMOW = ?1.64 to ?2.97 and less frequently up to ?5‰) indicates a significant contribution of subsurface water to the transport of boron. A model of multistage accumulation of boron in ore of the Dal’negorsk borosilicate skarn deposit is proposed.  相似文献   

15.
The Langdu skarn copper deposit in the Zhongdian area, Yunnan Province, China, has an average Cu grade of 6.49 %. The deposit is related to a porphyry intrusion(*216 Ma), which was emplaced in the Upper Triassic sedimentary rocks of the Tumugou and Qugasi Formations.At the Langdu skarn copper deposit, carbon and oxygen isotope ratios of fresh limestones(d18O = 3.0–5.6 % relative to V-SMOW; d13 C = 24.5–25.7 % relative to PDB)and partly altered limestones(d18O = 27–7.2 to-1.9 %;d13C = 11.8–15.2 %) indicated that the deposit was a typical marine carbonate source. Oxygen and carbon isotope values for calcites formed at different hydrothermal stages are-9.1 to 0.2 and 10.1–16.3 %, respectively. Moreover,the carbon–oxygen isotopic composition of an ore-forming fluid(d18O = 5.0–9.5 %, d13 C =-7.3 to-5.3 %) suggested the presence of magmatic water, which most likely came from the differentiation or melting of a homologous magma chamber. The deposition of Calcite I may arise from metasomatism in an open system with a progressively decreasing temperature.Later, the minerals chalcopyrite, pyrrhotite, quartz and Calcite II were precipitated due to immiscibility. Water–rock interaction could potentially be responsible for Calcite III precipitation in the post-ore stage.  相似文献   

16.
The Ayazmant Fe–Cu skarn deposit is located approximately 20 km SE of Ayval?k or 140 km N of Izmir in western Turkey. The skarn occurs at the contact between metapelites and the metabasites of the Early Triassic K?n?k Formation and the porphyritic hypabyssal intrusive rocks of the Late Oligocene Kozak Intrusive Complex. The major, trace, and rare earth-element geochemical analysis of the igneous rocks indicate that they are I-type, subalkaline, calc-alkaline, metaluminous, I-type products of a high-level magma chamber, generated in a continental arc setting. The 40Ar–39Ar isochron age obtained from biotite of hornfels is 20.3 ± 0.1 Ma, probably reflecting the age of metamorphic–bimetasomatic alteration which commenced shortly after intrusion into impure carbonates. Three stages of skarn formation and ore development are recognized: (1) Early skarn stage (Stage I) consisting mainly of garnet with grossular-rich (Gr75–79) cores and andradite-rich (Gr36–38) rims, diopside (Di94–97), scapolite and magnetite; (2) sulfide-rich skarn (Stage II), dominated by chalcopyrite with magnetite, andraditic garnet (Ad8489), diopside (Di6575) and actinolite; and (3) retrograde alteration (Stage III) dominated by actinolite, epidote, orthoclase, phlogopite and chlorite in which sulfides are the main ore phases. 40Ar–39Ar age data indicate that potassic alteration, synchronous or postdating magnetite–pyroxene–amphibole skarn, occurred at 20.0 ± 0.1 Ma. The high pyroxene/garnet ratio, plus the presence of scapolite in calc-silicate and associated ore paragenesis characterized by magnetite (± hematite), chalcopyrite and bornite, suggests that the bulk of the Ayazmant skarns were formed under oxidized conditions. Oxygen isotope compositions of pyroxene, magnetite and garnet of prograde skarn alteration indicate a magmatic fluid with δ18O values between 5.4 and 9.5‰. On the basis of oxygen isotope data from mineral pairs, the early stage of prograde skarn formation is characterized by pyroxene (Di94–97)-magnetite assemblage formed at an upper temperature limit of 576 °C. The lower temperature limit for magnetite precipitation is estimated below 300 °C, on the basis of magnetite–calcite pairs either as fracture-fillings or massive ore in recrystallized limestone-marble. The sulfide assemblage is dominated by chalcopyrite with subordinate molybdenite, pyrite, cubanite, bornite, pyrrhotite, galena, sphalerite and idaite. Gold–copper mineralization formed adjacent to andradite-dominated skarn which occurs in close proximity to the intrusion contacts. Native gold and electrum are most abundant in sulfides, as fine-grained inclusions; grain size with varying from 5 to 20 µm. Sulfur isotope compositions obtained from pyrrhotite, pyrite, chalcopyrite, sphalerite and galena form a narrow range between ? 4.8 and 1.6‰, suggesting the sulfur was probably mantle-derived or leached from magmatic rocks. Geochemical data from Ayazmant shows that Cu is strongly associated with Au, Bi, Te, Se, Cd, Zn, Pb, Ni and Co. The Ayazmant mineralizing system possesses all the ingredients of a skarn system either cogenetic with, or formed prior to a porphyry Cu(Au–Mo) system. The results of this study indicate that the Aegean Region of Turkey has considerable exploration potential for both porphyry-related skarns and porphyry Cu and Au mineralization.  相似文献   

17.
新田岭矿床是南岭钨锡成矿带中的一个大型矽卡岩型钨矿床,产于骑田岭岩体东北部与石炭系碳酸盐地层的接触带位置。本文运用LA-ICP-MS技术对该矿床矽卡岩中的石榴子石进行了系统的成分分析,获得了其主量、微量和稀土元素含量。结果显示,新田岭矿床中的石榴子石属于钙铁榴石-钙铝榴石固溶体系列(And24Gro66 -And71Gro22),石榴子石的端元成分在富钙铝榴石和富钙铁榴石之间变化。稀土元素的配分模式也同时出现了左倾、Eu负异常和右倾、Eu正异常两种类型,暗示新田岭矿床石榴子石结晶过程中热液流体存在不同的氧化还原环境和水/岩比条件,这也与其晶体中是否出现振荡环带相对应。将不同矽卡岩型矿床中石榴子石的W、Sn含量进行对比显示,含W矿化的矽卡岩型矿床中石榴子石的W、Sn含量整体上显著高于不含W矿化的矿床,指示石榴子石中的W、Sn含量在一定程度上具有预测矽卡岩型矿床成W矿潜力的作用。此外,石榴子石中Fe、Eu、U等元素的含量还可以进一步区分矽卡岩W矿床中的伴生金属元素类型(包括W-Mo、W-Sn、W-Cu-...  相似文献   

18.
The 2.7–3 Ma Ertsberg East Skarn System (Indonesia), adjacent to the giant Grasberg Porphyry Copper deposit, is part of the world’s largest system of CuAu skarn deposits. Published fluid inclusion and stable isotope data show that it formed through the flux of magma-derived fluid through contact metamorphosed carbonate rock sequences at temperatures well above 600° C and pressures of less than 50 MPa. Under these conditions, the fluid has very low density and the properties of a gas. Combining a range of micro-analytical techniques, high-resolution QEMSCAN mineral mapping and computer-assisted X-ray micro-tomography, an array of coupled gas–solid reactions may be identified that controlled reactive mass transfer through the ~ 1 km3 hydrothermal skarn system. Vacancy-driven mineral chemisorption reactions are identified as a new type of reactive transport process for high-temperature skarn alteration. These gas–solid reactions are maintained by the interaction of unsatisfied bonds on mineral surfaces and dipolar gas-phase reactants such as SO2 and HCl that are continuously supplied through open fractures and intergranular diffusion. Principal reactions are (a) incongruent dissolution of almandine-grossular to andradite and anorthite (an alteration mineral not previously recognized at Ertsberg), and (b) sulfation of anorthite to anhydrite. These sulfation reactions also generate reduced sulfur with consequent co-deposition of metal sulfides. Diopside undergoes similar reactions with deposition of Fe-enriched pyroxene in crypto-veins and vein selvedges. The loss of calcium from contact metamorphic garnet to form vein anhydrite necessarily results in Fe-enrichment of wallrock, and does not require Fe-addition from a vein fluid as is commonly assumed.  相似文献   

19.
The Nanling Range in South China hosts numerous world-class W–Sn deposits and some Fe deposits. The Mesozoic Tengtie Fe skarn deposit in the southern Nanling Range is contemporaneous with the regional Sn mineralization. The deposit is composed of numerous ore bodies along the contacts between the late Paleozoic or Mesozoic carbonate rocks and the Yanshanian Lianyang granitic complex. Interaction of the magma with hosting dolomitic limestone and limestone formed calcic (Ca-rich) and magnesian (Mg-rich) skarns, respectively. The Tengtie deposit has a paragenetic sequence of the prograde stage of anhydrous skarn minerals, followed by the retrograde stage of hydrous skarn minerals, and the final sulfide stage. Magnetite in the prograde and retrograde skarn stages is associated with diopside, garnet, chlorite, epidote, and phlogopite, whereas magnetite of the final stage is associated with chalcopyrite and pyrite. Massive magnetite ores crosscut by quartz and calcite veins are present mainly in the retrograde skarn stage. Laser ablation ICP-MS was used to determine trace elements of magnetite from different stages. Some magnetite grains have unusually high Ca, Na, K, and Si, possibly due to the presence of silicate mineral inclusions. Magnetite of the prograde stage has the highest Co contents, but that of the sulfide stage is extremely poor in Co which partitions in sulfides. Magnetite of magnesian skarns contains more Mg, Mn, and Al than that of calcic skarns, attributed to the interaction of the magma with compositionally different host rocks. Magnetite from calcic and magnesian skarns contains 6–185 ppm Sn and 61–1246 ppm Sn, respectively. The high Sn contents are not due to the presence of cassiterite inclusions which are not identified in magnetite. Instead, we believe that Sn resides in the magnetite structure. Regionally, intensive Mesozoic Sn mineralization in South China indicates that concurrent magmatic–hydrothermal fluids may be rich in Sn and contribute to the formation of high-Sn magnetite. Our study demonstrates that trace elements of magnetite can be a sensitive indicator for the skarn stages and wall-rock compositions, and as such, trace elemental chemistry of magnetite can be a potentially powerful fingerprint for sediment provenance and regional mineralization.  相似文献   

20.
Determining the precise timing of mineralization and mineralizing events is crucial to understanding regional mineralizing and other geological events and processes. However, there are a number of mineralogical and analytical limitations to the approaches developed for the absolute dating of mineralizing systems, such as molybdenite Re–Os and zircon and garnet U–Pb, among others. This means that the precise and accurate dating of mineralizing systems that may not contain minerals suitable for dating using existing approaches requires the development of new (and ideally in situ) approaches to absolute dating. This study outlines a new in situ analytical approach that has the potential to rapidly and accurately evaluate the timing of ore formation. Our study employs a novel application of in situ scheelite U–Pb dating analysis using laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) and samples from the Qiaomaishan deposit, a representative example of skarn mineralization within the Xuancheng ore district of eastern China. Our approach to scheelite dating of the deposit is verified by cross-comparison to dating of cogenetic garnet and apatite, proving the effectiveness of this approach. Our new approach to dating of scheelite-bearing geological systems is rapid, cheap, requires little sample preparation, and is undertaken in situ, allowing crucial geological and mineralogical context to be retained during analysis. The approaches outlined here not only allow the determination of the absolute timing of formation of the Qiaomaishan deposit through the U–Pb dating of scheelite [138.6 ± 3.2 Ma, N = 39, mean square weighted deviation (MSWD) = 1.17], garnet (138.4 ± 1.0 Ma, N = 40, MSWD = 1.3), and apatite (139.6 ± 3.3 Ma, N = 35, MSWD = 0.72), but also further supports the theoretical genetic links between this mineralization and the emplacement of a proximal porphyritic granodiorite intrusion (zircon U–Pb age: 139.5 ± 1.2 Ma, N = 23, MSWD = 0.3). Moreover, our research indicates that the higher the concentrations of U within scheelite, the more suitable that scheelite is for U–Pb dating, with the main factor controlling the U content of scheelite seemingly being variations in oxygen fugacity conditions. This novel approach provides a potentially powerful tool, not just for the dating of skarn systems but also with potential applications in orogenic and intrusion-related gold, porphyry W–Mo, and greisen mineralizing systems as well as other scheelite-bearing geological bodies or geological systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号