首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Flow mapping and physical volcanology of 15 basaltic lavas exposed in three critical road pass sections (ghats) in the Koyna-Warna region of the western Deccan Traps is presented in this paper. Transitional lavas like rubbly pahoehoe are most common morpho-type exposed in these ghat sections. Sinking of rubbly breccia into flow interiors and formation of breccia-cored rosette are common in some lava flows. Few rubbly lavas exhibit slabby tendencies. The amount and nature of the associated rubble is variable and result from the mechanical fracturing and auto-brecciation of the upper vesicular crust in response to distinctive stages in the cooling, crystallization and emplacement history of individual lava flows. Occurrence of aa and pahoehoe morpho-types in the lava flow sequence is subordinate. Three prominent pahoehoe flows separated by red bole horizons are seen in the upper parts of the Kumbharli ghat. These are thick, P-type sheet pahoehoe. The pahoehoe lavas represent compound flow fields that grew by budding, endogenous lava transfer and inflation. Presence of pahoehoe lavas in the Koyna-Warna region hints at possible hitherto unrecorded southern extension of Bushe-like flow fields. This study reconfirms the existence of pahoehoe-slabby-rubbly-aa flow fields and transitions even in the upper echelons of the Deccan Trap stratigraphy. The study of morphology and internal structure of lava flows exposed at the ghat sections in the Koyna-Warna region could guide subsurface core-logging that is critical in deciphering the physical volcanology and emplacement dynamics of basaltic lava flows penetrated by drill holes sunk under the scientific deep drilling programme.  相似文献   

2.
Anisotropy of Magnetic Susceptibility (AMS) as a tool has been explored here to investigate the nature of petrofabrics in Deccan Volcanic Province (DVP) of west-central Indian region by representative sampling in typical pahoehoe and rubbly pahoehoe lava flows, dykes within flows, shear zone and the impact crater units. The rock magnetic analysis indicate varying degree of concentration of titanomagnetite compositions dominated by multi domain (MD) to pseudo single domain (PSD) grains favoring shape anisotropy of minerals that form primary fabrics. The pahoehoe type lava flows shows planar oblate fabrics without any preferred orientation of principle susceptibility axis (K1) depicting crystal settling (of magnetic grains) as chief mechanism of fabric development. The rubbly pahoehoe type lava flow exhibit prolate fabrics with well clustered maximum susceptibility axis within horizontal to sub-horizontal planes depicting their response to viscosity shear. The dykes show well clustered K1 parallel to it’s plane locked during rapid contractional cooling. The sampling at Lonar impact crater was unable to trace any clear fabric due to impact/shock induced deformation and rather preserve the primary fabrics. Further, the shear zone depict random fabrics demanding more detailed and systematic sampling in both the cases. The present investigation infer that the magnetic mineralogy and magnetic fabric variations in the DVP are controlled by the flow mechanism and style of cooling that is characteristic of the given flow unit or dyke and any secondary or superimposed fabric needs to be examined by critical sampling strategy. While more detailed attempts are required to establish the AMS as a tool to record various aspects including the flow dynamics and rate of effusion in the vast terrain of DVP; the present approach is useful to characterize and correlate the lava flow units and dyke occurrences.  相似文献   

3.
The Paraná-Etendeka Volcanic Province records the volcanism of the Early Cretaceous that precedes the fragmentation of the South-Gondwana supercontinent. Traditionally, investigations of these rocks prioritized the acquisition of geochemical and isotopic data, considering the volcanic stack as a monotonous succession of tabular flows. Torres Syncline is a tectonic structure located in southern Brazil and where the Parana-Etendeka basalts are well preserved. This work provides a detailed analysis of lithofacies and facies architecture, integrated to petrographic and geochemical data. We identified seven distinct lithofacies grouped into four facies associations related to different flow morphologies. The basaltic lava flows in the area can be divided into two contrasting units: Unit I - pahoehoe flow fields; and Unit II - simple rubbly flows. The first unit is build up by innumerous pahoehoe lava flows that cover the sandstones of Botucatu Formation. These flows occur as sheet pahoehoe, compound pahoehoe, and ponded lavas morphologies. Compound lavas are olivine-phyric basalts with intergranular pyroxenes. In ponded lavas and cores of sheet flows coarse plagioclase-phyric basalts are common. The first pahoehoe lavas are more primitive with higher contents of MgO. The emplacement of compound pahoehoe flows is related to low volume eruptions, while sheet lavas were emplaced during sustained eruptions. In contrast, Unit II is formed by thick simple rubbly lavas, characterized by a massive core and a brecciated/rubbly top. Petrographically these flows are characterized by plagioclase-phyric to aphyric basalts with high density of plagioclase crystals in the matrix. Chemically they are more differentiated lavas, and the emplacement is related to sustained high effusion rate eruptions. Both units are low TiO2 and have geochemical characteristics of Gramado magma type. The Torres Syncline main valley has a similar evolution when compared to other Large Igneous Provinces, with compound flows at the base and simple flows in the upper portions. The detailed field work allied with petrography and geochemical data are extremely important to identify heterogeneities inside the volcanic pile and allows the construction of a detailed lithostratigraphical framework.  相似文献   

4.
Unlike pahoehoe, documentation of true a′a lavas from a modern volcanological perspective is a relatively recent phenomenon in the Deccan Trap (e.g. Brown et al., 2011, Bull. Volcanol. 73(6): 737–752) as most lava flows previously considered to be a′a (e.g. GSI, 1998) have been shown to be transitional (e.g. Rajarao et al., 1978, Geol. Soc. India Mem. 43: 401–414; Duraiswami et al., 2008 J. Volcanol. Geothermal. Res. 177: 822–836). In this paper we demonstrate the co-existence of autobrecciation products such as slabby pahoehoe, rubbly pahoehoe and a′a in scattered outcrops within the dominantly pahoehoe flow fields. Although volumetrically low in number, the pattern of occurrence of the brecciating lobes alongside intact ones suggests that these might have formed in individual lobes along marginal branches and terminal parts of compound flow fields. Complete transitions from typical pahoehoe to ‘a′a lava flow morphologies are seen on length scales of 100–1000 m within road and sea-cliff sections near Uruli and Rajpuri. We consider the complex interplay between local increase in the lava supply rates due to storage or temporary stoppage, local increase in paleo-slope, rapid cooling and localized increase in the strain rates especially in the middle and terminal parts of the compound flow field responsible for the transitional morphologies. Such transitions are seen in the Thakurwadi-, Bushe- and Poladpur Formation in the western Deccan Traps. These are similar to pahoehoe–a′a transitions seen in Cenozoic long lava flows (Undara ∼160 km, Toomba ∼120 km, Kinrara ∼55 km) from north Queensland, Australia and Recent (1859) eruption of Mauna Loa, Hawaii (a′a lava flow ∼51 km) suggesting that flow fields with transitional tendencies cannot travel great lengths despite strong channelisation. If these observations are true, then it arguably limits long distance flow of Deccan Traps lavas to Rajahmundry suggesting polycentric eruptions at ∼65 Ma in Peninsular India.  相似文献   

5.
This study focuses on the compound pahoehoe lava flow fields of the 2000 eruption on Mount Cameroon volcano, West Africa and it comprehensively documents their morphology. The 2000 eruption of Mount Cameroon took place at three different sites (sites 1, 2 and 3), on the southwest flank and near the summit that built three different lava flow fields. These lava flow fields were formed during a long‐duration (28th May–mid September) summit and flank eruption involving predominantly pahoehoe flows (sites 2 and 3) and aa flows (site 1). Field observations of flows from a total of four cross‐sections made at the proximal end, midway and at the flow front, have been supplemented with data from satellite imagery (SRTM DEM, Landsat TM and ETM+) and are used to offer some clues into their emplacement. Detailed mapping of these lava flows revealed that site 1 flows were typically channel‐fed simple aa flows that evolved as a single flow unit, while sites 2 and 3 lava flow fields were fed by master tubes within fissures producing principally tube‐fed compound pahoehoe flows. Sites 2 and 3 flows issued from ∼ 33 ephemeral vents along four NE–SW‐trending faults/fissures. Pahoehoe morphologies at sites 2 and 3 include smooth, folded and channelled lobes emplaced via a continuum of different mechanisms with the principal mechanism being inflation. The dominant structural features observed on these flow fields included: fissures/faults, vents, levees, channels, tubes and pressure ridges. Other structural features present were pahoehoe toes/lobes, breakouts and squeeze‐ups. Slabby pahoehoe resulting from slab‐crusted lava was the transitionary lava type from pahoehoe to aa observed at all the sites. Transition zones correspond to slopes of > 10°. Variations in flow morphology and textures across profiles and downstream were repetitive, suggesting a cyclical nature for the responsible processes. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
There is a growing interest in deciphering the emplacement and environmental impact of flood basalt provinces such as the Deccan, India. Observations of active volcanism lead to meaningful interpretations of now-extinct volcanic systems. Here, I illustrate and discuss the morphology and emplacement of the modern and active lava flows of Kilauea volcano in Hawaii, and based on them, interpret the compound pahoehoe lavas of the Deccan Traps. The latter are vastly larger (areally extensive and voluminous) than Kilauea flows, and yet, their internal architecture is the same as that of Kilauea flows, and even the sizes of individual flow units often identical. Many or most compound flows of the Deccan Traps were emplaced in a gentle, effusive, Kilauea-like fashion. Bulk eruption rates for the Deccan province are unknown, and were probably high, but the local eruption rates of the compound flows were no larger than Kilauea’s. Large (≥ 1000 km3) individual compound pahoehoe flows in the Deccan could have been emplaced at Kilauea-like local eruption rates (1 m3/sec per metre length of fissure) in a decade or less, given fissures of sufficient length (tens of kilometres), now exposed as dyke swarms in the province.  相似文献   

7.
The present paper records some of the remnant vertical and horizontal to sub-horizontal gas migration channels in the Deccan Trap basalts from the vertical escarpment face at Bhaja Caves. These could have developed during the eruption, migration, inflation and overriding of the basaltic lava flows. The accumulated entrapped gases and volatiles of the lower flows migrated vertically and laterally into offshoots along the upper contacts or within the flow itself. In most cases, the vesicles are found to be empty as well as filled with the secondary minerals.  相似文献   

8.
《Gondwana Research》2002,5(3):649-665
The Mandla lobe in the eastern part of the Deccan volcanic province represents an isolated lava pile having a thickness of ∼900 m. The large thickness of this lava pile and its spatial detachment from the western Deccan outcrop points to a plausible second source. The stratigraphic configuration of the central and eastern Deccan lava sequences and their possible stratigraphic correlation are primarily based on geology and chemical signatures of the lava flows. Based on variations in the incompatible element ratios, the lava sequences of Chindwara, Jabalpur-Seoni and Jabalpur-Piparia sections were classified into four informal formations showing similarity with the southwestern formations. Major and trace element abundances in fifteen lava flows of Jabalpur area are similar to that of the southwestern Deccan lava flows. It has been found that the Ambenali Fm. and a few Khandala and Bushe Fm. flows are present in the northeastern Deccan. The regional mapping and detailed petrographic studies coupled with the lateral tracing have enabled the recognition of thirty-seven physically distinct lava flows and is justified by their major-elemental chemistry. The ‘intraflow variations’ studied in some of the flows is very low for most of the major oxides. These thirty-seven lava flows are grouped into eight chemical types. The order of superposition in this sequence reflects that the older flows occur in the west of the outlier at the Seoni-Jabalpur-Sahapura sector whereas, the younger flows are confined to the Dindori-Amarkantak sector in the east. The spatial disposition of the lava flows suggests that the structural complexity in the lava flow sequence in the Mandla lobe lies between Jabalpur and Dindori. The juxtaposition of distinct groups of lava flows are observed near Deori (flows 1 to 4 abeted aginst flows 5 to 14) and Dindori areas. At Dindori and towards its south the distinct lava packages (flows 15 to 27 and flows 28 to 37) are juxtaposed along the course of Narmada river. The possible explanation for this could be the presence of four post-Deccan faults at Nagapahar, Kundam, Deori and Dindori areas. The vertical shift of chemically distinct lava packages at different sectors in the outlier contravenes the idea of small regional dip and favours the presence of four NE-SW trending post-Deccan faults. Major geochemical breaks, when traced out from section to section, exhibit shifting in heights by approximately 150 m near Nagapahar and 300 m near Deori and Dindori areas. The field, petrographic and major-oxide data sets considered in conjuction with the magnetic chron reversal heights, support the inference that four faults trending NE-SW are present in the Mandla lobe.A commonality in the mineralo-chemical attributes of the infra (Lametas)-/inter-trappean as well as weathered Deccan basalt further favours their derivation from Deccan basalt, implying the availability of Deccan basalt during the Maastrichtian Lameta sedimentation. This observation does not match with the models suggesting an extremely short duration of Deccan volcanism (<0.5 Ma) at the KTB, but is congruent with the models advocating a more prolonged Deccan volcanism.  相似文献   

9.
Morphological evolution of classical pāhoehoe to transitional flow-type in a compound basalt flow occurring in the lower pile of Deccan traps is described here from the southern slope of Mesan Dongar in Manmad-Chandwad area, western part of Maharashtra plateau, India. The transitional flow lobes, largely identified as rubbly pāhoehoe-type, are characterized by a crust of breccias, with thickness ranging from 10 to 20 m. The breccia is generally a welded one and consists of mm to m-size, angular to sub-angular basaltic clasts that vary in vesiculation (vesicle size, shape and population). The crust, at times, is supported by an inner vesicular zone coherently developed above a persistent core that varies in thickness from 10 to 15 m. Base of these lobes is smooth, sparsely vesicular, without any basal breccia.Many of the transitional lobes of Mesan Dongar, however, shared a few common morphological traits with slabby pāhoehoe and this inherent uncertainty in classifying them as rubbly pāhoehoe has been greatly reduced using the semi-quantitative tool of Keszthelyi (2002). Moreover, it is also proposed that this morphological evolution of flow lobes in Mesan Dongar represents a NW-SE trending, southerly propagating and at least four kilometre long flow-front of pāhoehoe lava. Identification of flow fronts is important, even in this ~65 Ma old, dissected Deccan flood basalt province, as these can reveal vital information on flow dynamics, slope and cooling histories of individual flows/lobes.  相似文献   

10.
Compositional studies on different forms of magnetite, ulvospinel, ilmenite and hematite mineral phases occurring in 37 lava flows and 6 dykes of the Mandla lobe are presented in this paper. Ilmenite (0001) in equilibrium with titanomanetite show high values of temperature of equilibration, ranging from 1172–974°C, for high alumina quartz normative tholeiitic lava flows of Chemical Type - A; 1129–1229°C for low alumina quartz normative tholeiitic lava flows of Chemical Type - B; 1283–1124°C for tholeiitic lava flows of Chemical Type - F and 1243°C and 99O°C for two diopside olivine normative tholeiite flows of Chemical Type D. High olivine normative flows of Chemical Type - G and H show 1095°C and 1092°C respectively. Whereas, high hypersthene normative tholeiite flow of Chemical me C shows temperature of 1187°C. Data plots disposition over iron-titanium oxide equilibration temperature vs – logfo2, diagram for Mandla lava flows and other parts of the Deccan (Igatpuri, Mahabaleshwer, Nagpur and Sagar areas) revealed that tholeiitic (evolved) basalt of the eastern Deccan volcanic province formed at high temperatures whereas, picritic (primitive) lavas of Igatpuri and tholeiitic basalt of Mahabaleshwar areas were formed at low temperatures. Mahabaleshwer basalts follow FMQ (fayalite-magnetite-quartz) buffer curve but, plots of the Mandla basalts lie above this curve indicating higher temperatures of crystallisation of ilmenite-titanomagnetite than that of the lava flows from other parts of Deccan 'Raps. The eastern Deccan Traps are most evolved types of lava as characterised by its low Mg-number and Ni content whereas, Igatpuri lava flows are picritic (primitive), having high Mg-number and Ni contents. Temperature vs FeO + Fe2O3 / FeO + Fe2O3 + MgO ratio data plots for Mandla and other Deccan lava flows and liquidus data for Hawaiian tholeiites, indicated that Igatpuri basalts lie parallel to the liquidus line of Hawaiian tholeiite but at lower temperatures. Large data plots of Mandla lava flows lie along the liquidus line of the Hawaiian lava. The highly vesicular nature of compound lava flows having large amount of volatile is responsible for low temperature values whereas, lava flows represented by high temperatures show high modal values of glass and opaque minerals.  相似文献   

11.
Field investigations of the Deccan Trap lava sequence along a 70 km traverse in the Narsingpur-Harrai-Amarwara area of central India indicate twenty lava flows comprising a total thickness of around 480 m. Primary volcanic structures like vesicles and cooling joints are conspicuous in this volcanic succession and are used to divide individual flows into three well-defined zones namely the lower colonnade zone, entablature zone, and the upper colonnade zone. The variable nature of these structural zones is used for identification and correlation of lava flows in the field. For twenty lava flows, the thicknesses of upper colonnade zones of eight flows are ∼5 m while those of eight other flows are ∼8 m each. The thicknesses of upper colonnade zones of remaining four flows could not be measured in the field. Using the thicknesses of these upper colonnade zones and standard temperature-flow thickness-cooling time profiles for lava pile, the total cooling time of these sixteen Deccan Trap lava flows has been estimated at 12 to 15 years.  相似文献   

12.
Abstract: Several native sulfur specimens, collected from Shiretoko-Iwozan volcano, eastern Hokkaido, Japan, exhibit spinifex texture, which appears to resemble that often observed in komatiite. The spinifex texture is exhibited by yellow-colored elongated skeletal native sulfur crystals up to 5 cm long settled in medium gray-colored fine–grained clayey matrix. One surface of a specimen is coated by layers of micro pillow lava of native sulfur. Such specimens were rarely found as clasts or fragments around the 1936 No. 1 crater that erupted native sulfur flows, together with the most common monomineralic native sulfur fragments of native sulfur flows having pahoehoe surface and of native sulfur dikes. The elongated spinifex native sulfur crystals presently consist of aggregated polygrains of orthorhombic sulfur crystals formed through crystallo-graphic transition from the single crystal of monoclinic sulfur initially crystallized. The spinifex texture exhibited by elongated skeletal native sulfur crystals is a product of rapid cooling of sulfur melt. Many lithic fragments of altered country rocks are present in the specimens exhibiting native sulfur spinifex texture. This suggests that segregation of the sulfur melt from the mixture of lithic fragments and sulfur melt was incomplete because the mixture was chilled before the melt segregation. Elongated skeletal native sulfur crystals may have nucleated and crystallized directly from the molten sulfur liquid. Lithic fragments mixed in the melt are supposed to have acted as nuclei for the nucleation of the native sulfur crystals. On the other hand, the most of native sulfur flows consist of monomineralic massive native sulfur with very scarce lithic fragments. Such massive monomineralic native sulfur crystallized from the supercooled, solidified amorphous sulfur. Such supercooled amorphous state may have been attained due to the lack of nuclei because of the scarcity of lithic fragments. The unique structures exhibited by native sulfur lava flow, including pahoehoe surface and spinifex texture, are due to the characteristic physical property of molten sulfur liquid, that is, low viscosity.  相似文献   

13.
Geochemical and geochronological data for rocks from the Rajahmundry Traps, are evaluated for possible correlation with the main Deccan province. Lava flows are found on both banks of the Godavari River and contain an intertrappean sedimentary layer. Based on40Ar/39 Ar age data, rocks on the east bank are post K-T boundary, show normal magnetic polarity, and belong to chron 29N. Their chemistry is identical to lavas in the Mahabaleshwar Formation in the Western Ghats, ∼1000km away. It was suggested earlier that the genetic link between these geographically widely separated rocks resulted from lava flowing down freshly incised river canyons at ∼ 64 Ma. For the west bank rocks, recent paleomagnetic work indicates lava flows below and above the intertrappean (sedimentary) layer show reversed and normal magnetic polarity, respectively. The chemical composition of the west bank flow above the intertrappean layer is identical to rocks on the east bank. The west bank lava lying below the sedimentary layer, shows chemistry similar to Ambenali Formation lava flows in the western Deccan.40Ar/39 Ar dating and complete chemical characterization of this flow is required to elucidate its petrogenesis with respect to the main Deccan Province.  相似文献   

14.
The 120 m-wide Khedrai Dam lava channel is one of the widest recorded in the Deccan Volcanic Province. Like many recent ones, this channel also has a pair of linear marginal levees made of breccia and confines the channelfill lava. It is resting over a pahoehoe flow (substrate) of basalt studded with plagioclase megacrysts, also known as the Giant Plagioclase Basalt (GPB). The channel-fill lava, which makes the lining at the edges and basal portion of the channel, is a comb-layered basalt (Cl-B) characterized by alternating layers rich in curved, branching augite crystals and laths of plagioclase — a texture indicative of high order of supercooling and rapid cooling rates. The dominant and centrally filling lava of this channel is a plagioclase-phyric basalt (Pp-B) that has a wide variation in phenocryst number from megacryst-poor to megacryst-rich. Occurrence of centimetre to decimetre size angular fragments of Cl-B within Pp-B fill indicates mechanical dislodgements of channel-lining by flowing lava. This also suggests that the channel was reactivated before it finally lost its hydraulic gradient and solidified.  相似文献   

15.
The nature and style of emplacement of Continental Flood Basalt (CFB) lava flows has been a matter of great interest as well as considerable controversy in the recent past. However, even a cursory review of published literature reveals that the Columbia River Basalt Group (CRBG) and Hawaiian volcanoes provide most of the data relevant to this topic. It is interesting to note, however, that the CRBG lava flows and their palaeotopographic control is atypical of other CFB provinces in the world. In this paper, we first present a short overview of important studies pertaining to the emplacement of flood basalt flows. We then briefly review the morphology of lava flows from the Deccan Volcanic Province (DVP) and the Columbia-Oregon Plateau flood basalts. The review underscores the existence of significant variations in lava flow morphology between different provinces, and even within the same province. It is quite likely that there were more than one way of emplacing the voluminous and extensive CFB lava flows. We argue that the establishment of general models of emplacement must be based on a comprehensive documentation of lava flow morphology from all CFB provinces.  相似文献   

16.
Rootless cones, also (erroneously) called pseudocraters, form due to explosions that ensue when a lava flow enters a surface water body, ice, or wet ground. They do not represent primary vents connected by vertical conduits to a subsurface magma source. Rootless cones in Iceland are well studied. Cones on Mars, morphologically very similar to Icelandic rootless cones, have also been suggested to be rootless cones formed by explosive interaction between surface lava flows and ground ice. We report here a group of gentle cones containing nearly circular craters from Mount Pavagadh, Deccan volcanic province, and suggest that they are rootless cones. They are very similar morphologically to the rootless cones of the type locality of Myvatn in northeastern Iceland. A group of three phreatomagmatic craters was reported in 1998 from near Jabalpur in the northeastern Deccan, and these were suggested to be eroded cinder cones. A recent geophysical study of the Jabalpur craters does not support the possibility that they are located over volcanic vents. They could also be rootless cones. Many more probably exist in the Deccan, and volcanological studies of the Deccan are clearly of value in understanding planetary basaltic volcanism.  相似文献   

17.
Many tholeiitic dyke-sill intrusions of the Late Cretaceous Deccan Traps continental flood basalt province are exposed in the Satpura Gondwana Basin around Pachmarhi, central India. We present field, petrographic, major and trace element, and Sr–Nd–Pb isotope data on these intrusions and identify individual dykes and sills that chemically closely match several stratigraphically defined formations in the southwestern Deccan (Western Ghats). Some of these formations have also been identified more recently in the northern and northeastern Deccan. However, the Pachmarhi intrusions are significantly more evolved (lower Mg numbers and higher TiO2 contents) than many Deccan basalts, with isotopic signatures generally different from those of the chemically similar lava formations, indicating that most are not feeders to previously characterized flows. They appear to be products of mixing between Deccan basalt magmas and partial melts of Precambrian Indian amphibolites, as proposed previously for several Deccan basalt lavas of the lower Western Ghats stratigraphy. Broad chemical and isotopic similarities of several Pachmarhi intrusions to the northern and northeastern Deccan lavas indicate petrogenetic relationships. Distances these lava flows would have had to cover, if they originated in the Pachmarhi area, range from 150 to 350 km. The Pachmarhi data enlarge the hitherto known chemical and isotopic range of the Deccan flood basalt magmas. This study highlights the problems and ambiguities in dyke-sill-flow correlations even with extensive geochemical fingerprinting.  相似文献   

18.
火山"熔岩流气泡古高度计"及其在云南腾冲火山区的应用   总被引：6，自引：5，他引：1  
通过对火山熔岩流及其气泡特征的研究能够确定熔岩流喷发时的古高度,本文将这一方法称为火山“熔岩流气泡古高度计”.“熔岩流气泡古高度计”是在实地测量熔岩流厚度和实验室对熔岩流顶底气泡体积精确测定的基础上,利用流体力学原理和气体状态方程,通过计算古大气压强,最终获得火山喷发时的古高度.由于火山岩是开展同位素测年的理想材料,并且利用熔岩流计算古高度所需的参数(熔岩流厚度和气泡体积)不受古气候等因素(温度、降雨量等)影响,因此,这一方法以其可靠的年龄和独立的计算参数明显区别于其它古高度计.“熔岩流气泡古高度计”核心技术包括:(1)熔岩流的挑选与厚度测量;(2)熔岩流底部和顶部气泡体积的计算.中等规模、具简单冷凝历史,并且厚度稳定的偏基性熔岩流,是开展古高度计算的理想对象.熔岩流气泡体积的测试手段包括注胶、岩石抛光-扫描、体视学转换和三维CT扫描4种方法.“熔岩流气泡古高度计”最终计算结果误差为400m左右.本文利用“熔岩流气泡古高度计”计算了腾冲火山区熔岩流的古高度,研究结果显示:“熔岩流气泡古高度计”计算的黑空山熔岩流高程与目前的实际高程相吻合.开展“熔岩流气泡古高度计”研究的前提是研究区必须出露保存完好的熔岩流.我国青藏高原的隆升历史一直是国际学术界争论的热点课题,那里出露大面积熔岩流.可以预见,“熔岩流气泡古高度计”将会逐渐成为研究青藏高原隆升历史的有效手段之一.  相似文献   

19.
A review of the available radiometric and paleomagnetic data from the Deccan Flood Basalt Province (DFBP) suggests that the volcanism was episodic in nature and probably continued over an extended duration from 69 Ma to 63 Ma between 31R and 28N. It is likely that the most intense pulse of volcanism at 66.9 ± 0.2 Ma preceded the Cretaceous Tertiary Boundary (KTB, 65.2 ± 0.2Ma) events by R∼1.7Ma. The magnetostratigraphic record in the Deccan lava pile is incomplete and it is therefore possible that the lava flows constituting the reverse polarity sequence were erupted in more than one reversed magnetic chron.  相似文献   

20.
Several basaltic lava flows have been identified in the study area in and around Linga, in the Eastern Deccan Volcanic Province (EDVP) on the basis of distinctly developed structural zones defined by primary volcanic structures such as columnar joints and vesicles. These basaltic lava flows are spatially distributed in four different sectors, viz., (i) Bargona–Gadarwara (BG) sector (ii) Shikarpur–Linga (SL) sector (iii) Arjunvari–Survir Hill (AS) sector and (iv) Kukrachiman–Morand Hill (KM) sector. A three-tier classification scheme has been adopted for the characterization and classification of individual lava flows. Each lava flow consists of a Lower Colonnade Zone (LCZ) overlain by the Entablature Zone (EZ) and Upper Colonnade Zone (UCZ). The LCZ and UCZ grade into a distinct/indistinct Lower Vesicular Zone (LVZ) and Upper Vesicular Zone (UVZ), respectively. The LCZ and UCZ of the flows are characterized by columnar joints while the EZ is marked by multi-directional hackly jointing. The geometry of different joint patterns corresponds to different styles of cooling during solidification of lava flows. Detailed petrographic studies of the investigated lava flows reveal inequigranular phenocrystal basalts characterized by development of phenocrystal phases including plagioclase, clinopyroxene and olivine, whereas groundmass composition is marked by tiny plagioclase, clinopyroxene, opaque mineral and glass. Electron microprobe analyses indicate that the olivine has a wide range ∼Fo22 to Fo66 revealing a wide spectrum of compositional variation. Pyroxene compositions are distinctly designated as Quad pyroxenes. Phenocrystal pyroxenes are mostly diopsidic, while the groundmass pyroxenes mainly correspond to augite with a minor pigeonite component. Pyroxene phenocrysts are characterized by a prominent Ti-enrichment. Phenocrystal plagioclase grains are calcic (An52.7–An72.9), whereas groundmass plagioclase are relatively sodic (An39.2–An61.6). Groundmass opaque minerals are characteristically found to be Ti–magnetite/ilmenite/pyrophanite. Pyroxene thermometry reveals a temperature span of 850°C to 1280°C for the studied lavas while olivine–clinopyroxene thermometry yields a temperature range from 1040°–1160°C. The variation of temperature for the lava flows is ascribed to their normal cooling history after eruption.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号