共查询到20条相似文献，搜索用时 15 毫秒
1.
WILLIAM C. MAHANEY 《Boreas: An International Journal of Quaternary Research》1995,24(4):293-304
Recent analyses of microtextures on quartz particles (63–2000 μm) from Quaternary tills in Antarctica, Germany, southern Ontario, western Wyoming, Tibet, the Austrian Alps, and Mount Kenya show that glacial fracture and abrasion microfeatures may be used to infer the thickness, transport history and ice dynamics of Pleistocene and Holocene glaciers. Quartz sands emplaced by continental and mountain ice were studied by SEM after transport over variable distances in glaciers estimated to range from 150 m to 1500 m in thickness. Relative differences in ice thicknesses, distances of transport, and/or ice dynamics appear to have determined the frequency of occurrence and type of microtextures occurring on sand-size particles. Subparallel fracture microfeatures tend to increase in frequency over a greater proportion of particle surfaces with increasing ice thickness and distance of transport. Conchoidal fractures, the most typical in quartz, and to some degree crescentic gouges abound on fragments emplaced by continental ice. Other possible fracture and fragmentation mechanisms, producing features of generally glacial origin, involve low velocity impacts induced by stick-slip mechanisms, under variable cryostatic stresses, producing fracturing and abrasion across particle surfaces. Their generation implies high local contact stresses associated with high strain rates. 相似文献
2.
Comparative scanning electron microscopy study of oriented till blocks, glacial grains and Devonian sands in Estonia and Latvia 总被引：7，自引：0，他引：7
WILLIAM C. MAHANEY VOLLI KALM 《Boreas: An International Journal of Quaternary Research》2000,29(1):35-51
Samples of Middle Devonian (Eifelian age; 387–380 Ma) indurated and non‐cemented sandstone were compared with Pleistocene basal tills in Estonia and Latvia to test a hypothesis that glacial SEM (scanning electron microscopy) microtextures are distinctly different from those produced in a fluvial depositional environment. The deposits of Middle Devonian Aruküla Stage were emplaced in a continental water basin close to sea level and well away from any glacial source. Therefore, the SEM microtextures on quartz grains from the Aruküla Stage should show mainly the effect of stream transport. The basal tills are of Late Weichselian age deposited as ground moraine directly over the sandstone. Additional glaciofluvial and glaciolacustrine samples were included with the tills to determine whether glacial and fluvial‐lacustrine transport could be differentiated by the SEM microtextures. Samples of oriented blocks of till from a limited number of sites were studied without pretreatment to determine whether sand clast orientation could provide a method for determining glacial flow vectors. While there are some microtextural similarities between grains from glacial and glaciofluvial‐lacustrine depositional environments, the vast majority of grains from till deposits (50%–60%) are faceted, sharp edged, angular to subangular, and comprised of numerous and distinct microfeatures including abraded surfaces over microfractures, deep linear and curved troughs (striations), step features, and a preponderance of conchoidal and linear microfractures. Glaciofluvial and lacustrine grains contain abundant abrasion features and v‐shaped percussion cracks that make them very distinct from glacial grains. Fluvial transport produces primarily rounded grains, well abraded, with v‐shaped percussion scars dominating. Thus, it is possible to use microtextural differences between the three sample suites to identify particular depositional environments. Oriented till blocks provide information on sand clast orientation. Although carbonate coatings often obscure sand clasts in untreated blocks, it is possible to determine some microfabric information that can be useful in determining flow direction of the ice. 相似文献
3.
Quartz sand grains in late Quaternary deposits of the Virunga Mountains, northwestern Rwanda, were found to contain glacial-crushing microtextures. Glacially-crushed subangular grains generally lack sharp edges, and carry mainly low frequency, linear crushing features. Because there are no known tills in the Virunga Volcanoes (and because quartz is rare in volcanic terrain), it is likely the grains were delivered by aeolian transport from the Ruwenzori Massif, -150 km to the north. All the grains studied are consistent with crushing under low shear stress, and over short transport distances, in alpine glaciers. An increase in the percentage of glacially-crushed quartz from Holocene to Pleistocene beds likely reflects on the increased strength of the paleowind system (trade winds) during the last glacial maximum. Alternatively, it could reflect on the increased source area for glacially-crushed grains resulting from an increase in the extent of the Afroalpine belt during the last glaciation. 相似文献
4.
Mats O. Molén 《Sedimentology》2014,61(7):2020-2041
Interpretation of quartz sand grain surface microtextures with scanning electron microscopy has been riddled with inconsistencies, invalid assumptions and much subjectivity. Therefore, a novel classification for analysing grain surface microtextures is presented based on the origin of complete grain surfaces. This novel method has solved most of the earlier problems of interpretation of surface microtextures, and it is easy to use and to quickly find evident genetic interpretations of diamicts. The data are plotted graphically in ‘2‐History Diagrams’ or ‘3‐History Diagrams’ for quick visual inspection and statistical evaluation. Source rocks and Quaternary glacial deposits from Scandinavia and Southern Ontario, representing different ice‐substrate dynamics, are analysed to define surface microtextures from typical glacigenic grains, bedrock and fluvially transported grains. Typical glacially crushed grains display large‐scale fractures and abrasion. Shield bedrock grains display large or small‐scale fractures and solution/precipitation microtextures. Fluvially transported grains exhibit abrasion and solution/precipitation microtextures. 相似文献
5.
WILLIAM C. MAHANEY WOLFGANG ANDRES 《Boreas: An International Journal of Quaternary Research》1991,20(3):231-239
Detailed mineralogical analysis of the fine and very fine sand fractions (63–250) in the Dreihausen Loess Sequence shows the presence of numerous glacially crushed grains, including a significant amout of quartz. Previous theories regarding the origin of loesses in central Germany held that all sediments were derived locally, following short-distance transport from nearby sandstone outcrops. New data presented here show that many quartz and feldspar grains were glacially crushed, weathered, crushed again, transported, and emplaced by aeolian processes at Dreihausen. Crushing features observed are compatible with transport in both continental and alpine glaciers; some clasts show the effects of abrasion by both water and ice transport, while others are partly rounded presumably by fluvial and/or aeolian processes. Stronger palewind systems during the Pleistocene presumably contributed to the transport and emplacement of glacial grains from ice centers in both the Alps and the Baltic areas, and also possibly from the Rhine Basin. 相似文献
6.
WILLIAM C. MAHANEY MICHAEL W. MILNER 《Boreas: An International Journal of Quaternary Research》1998,27(2):140-152
Chemically inert and physically hard minerals, of which zircon is universally present and usually abundant, are minor but important components of glacial gold and tin placer deposits. Zircons and other much less common resistant minerals inflict major damage on light minerals, of which quartz is the dominant, chemically resistant member. Because of its sharpness inherited from a strong crystal morphology, and overall prismatic form, zircon is especially important as an abrasive mineral in glacial systems. Its chemically inert nature, its dominancc in terms of hardness over light minerals, and its abundance amongst other hard minerals makes it unique and important as a microstriator. Transported in a highly viscous glacial medium, it is capable of damaging other softer grains with aggressive crushing, chipping, striating, abrading and polishing processes. These occur in both coarse-grained gravelly sand and in fine-grained clayey silt matrices at the base of the icc. Zircon grains tend to serve many functions, initially as inclusion tools in larger feldspar grains and as 'studs' in quartzite grains. Wearing first on points, and later, following liberation, they assume a shape by honing, faceting and fracturing as tools and as grit that allows them to act as microstriators, inflicting damage on other particles in the basal ice. With a hardness of 7.5, lacking significant cleavage, and exhibiting strong crystal form. the finer-grained zircons appear to abrade and striate quartz (hardness 7.0). feldspars (hardness 6.0). garnets (hardness 6.5–7.5), and gold (hardness 2.5-3.0). A detailed study of Bolivian tills shows the dominant form of the zircon striator to be an elongate, pencil shape (euhedral polygonal prism with sharp, pyramidal terminations) that shows various degrees of abrasion, and ranges from wide grains with dull edges to narrow grains with sharp edges (typical pencil form). 相似文献
7.
Quantification of SEM microtextures useful in sedimentary environmental discrimination 总被引：1，自引：0，他引：1
WILLIAM C. MAHANEY REW STEWART VOLLI KALM 《Boreas: An International Journal of Quaternary Research》2001,30(2):165-171
Scanning electron microscopic imagery is often used to identify and discriminate among environments of sedimentation with the main aim of identifying individual microfeatures, or suites of microtextures, that are considered indicative of a particular depositional environment or geologic process. Because few microtextures are considered to represent a single geologic process it is necessary to analyze a large number of quartz sands and other mineralic grains with the objective of determining the frequency of occurrence of a range of microtextures within a distinct sample suite. Using percent frequency of occurrence of different microtextures from suites of fluvial, glaciofluvial and glacial sands from sites in Estonia and Latvia, we invoked statistical comparison of different sample suites using Euclidean distances. These provide a quantitative means of measuring the differences among different sediments and processes that formed them and also a quantification tool useful in assessing microtextures as a recorder of sedimentary environments. 相似文献
8.
云南大理点苍山末次冰期冰碛物石英砂扫描电镜形态特征分析 总被引：5，自引：1，他引：4
云南大理点苍山是大理冰期的命名地,保存有确切的末次冰期冰川作用遗迹.对点苍山冰碛物石英砂进行了扫描电镜形态特征分析,获得了其石英砂形态特征及其频率,并在冰川成因的典型特征的频率上取得了新的认识.扫描电镜分析表明,点苍山冰碛物石英砂形态特征主要为：石英砂形状主要为次棱角状、尖棱角状和多棱角状,边缘多可见次棱脊和棱脊磨损,表面起伏度高;机械特征主要有贝壳状断口、平行解理面、裂隙、粘附碎片、擦痕、机械V形坑;化学特征主要有蚀坑和蚀缝、蜂窝状溶蚀表面、无定形硅沉淀和硅质薄膜.在石英砂表面与冰川作用密切相关的擦痕的频率为8%～32%;粘附碎片的频率为16%～40%;裂隙的频率为12%～32%.通过对点苍山冰碛物的石英砂扫描电镜分析,得出该第四纪海洋性冰斗冰川和悬冰川的石英砂形态特征及其频率.该冰碛物石英砂原始形态特征明显,机械特征频率不高,是近源堆积的冰碛物石英砂的典型形态特征. 相似文献
9.
Microsedimentology of ice stream tills from the Eastern Alps,Austria – a new perspective on till microstructures 
下载免费PDF全文
下载免费PDF全文 John Menzies Jürgen M. Reitner 《Boreas: An International Journal of Quaternary Research》2016,45(4):804-827
This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills. 相似文献
10.
Scanning electron microscopy of quartz grains in supraglacial debris, Adishy Glacier, Caucasus Mountains, USSR 总被引：7，自引：0，他引：7
WILLIAM C. MAHANEY REIN VAIKMAE KAI VARES 《Boreas: An International Journal of Quaternary Research》1991,20(4):395-404
The surface microtopography of quartz grains in glacial depostis has often been attributed to mechanical release from source rocks during weathering and prior to entrainment by glaciers. Fractures on quartz particles, including subparallel and conchoidal features, often attributed to cryostatic pressure in ice and stick-slip processes at the base of glaciers, have been considered, in part, to result from mechanical weathering of source rocks. To test this hypothesis we studied 15 samples of supraglacial debris from the Adishy Glacier in the central Caucasus Mountains, USSR. Clasts in transport on the surface of the glacier originate primarily from the cirque headwall by weathering and mass wasting processes; a minor amount is presumed to have been derived from aeolian influx following reworking of older sediments down valley. The results show unequivocally that mechanical weathering is only likely to produce grains with pronounced fracture faces that lack subparallel and conchoidal fracture features. No fresh glacial-crushing type features were observed on these samples. Grains that had been glacially crushed, weathered and retransported, presumably by aeolian processes, were observed in four samples of the data set. 相似文献
11.
中国西部山岳冰川MIS3b冰进的初步探讨 总被引：6，自引：5，他引：1
对横断山的沙鲁里山、祁连山东段的冷龙岭、天山西段托木尔峰南麓的阿特奥依纳克河流域等3个地区7个研究点的第四纪冰川作用开展了深入研究,应用ESR测年技术在7个研究点特定的地貌部位共获得12个对应于MIS3(56~36 ka BP)的测年结果,且年龄基本上都对应于MIS3b(54~44 kaBP).结合已有的研究资料,并对MIS3气候特征进行综合分析,研究表明:MIS3强大的季风环流带来的丰富降水与MIS3b冷阶段的组合是川西高原的沙鲁里山与祁连山东段冷龙岭MIS3b冰进的主要原因,而天山西段阿特奥依纳克河流域MIS3b冰进则是不稳定的西风波动带来的丰富降水所致.这3个地区沉积有该次冰进的冰碛物. 相似文献
12.
13.
冰期向间冰期转换或现代全球气候变暖等背景下,冰川一旦退缩就会引发基岩和冰碛边坡失稳,甚至冰川泥石流等冰消后（paraglacial）地表过程;因此,该过程成为驱动原冰川作用区及其下游谷地地貌演化的重要因子。然而,冰消后过程时空变化特征及其驱动因子等相关研究,目前仍面临两方面问题：其一,各种冰消后沉积、冰碛等混杂堆积间判别的手段缺乏;其二,冰消后过程对下游谷地演化影响的关注不足。为此,本文以典型海洋型冰川作用区——贡嘎山东坡的冰碛和冰消后沉积为研究对象,并结合两处大陆型冰川冰碛,探讨了粒度和石英颗粒表面形态特征两个指标区分上述混杂堆积的有效性。结果表明,各种冰消后沉积物继承了源区冰碛的很多特征,但也呈现出一定独特性,指示出这两个指标综合对比的方法能实现各类冰消后沉积、冰碛的有效判别;同时,鉴于冰川性质、冰川作用期次和岩性等因素都可能影响源区冰碛的粒度和石英颗粒表面形态,以这两个指标判别时应限于同区域,避免选用沉积物的共性特征。基于贡嘎山东坡冰碛、各种冰消后沉积物与磨西台地不同层位粒度与石英颗粒表面形态的对比和聚类分析,确认台地底部和中部可能分别为MIS3冰碛与MIS3以来的泥石流沉积,上部则可能为河流沉积或河流改造过的冰川泥石流沉积。磨西谷地冰消后过程堆积和暴露时代,指示出强烈冰消后过程使得磨西河谷地末次冰期向全新世转换时一直在堆积,甚至持续到约6~7 ka前后才停止,之后转为侵蚀下切。 相似文献
14.
Late Quaternary glaciation in the Hebrides sector of the continental shelf: was St Kilda overrun by the British‐Irish Ice Sheet? 下载免费PDF全文
下载免费PDF全文 John F. Hiemstra Richard A. Shakesby Andreas Vieli 《Boreas: An International Journal of Quaternary Research》2015,44(1):178-196
Until recently, the British‐Irish Ice Sheet (BIIS) was thought to have reached no farther than a mid‐continental shelf position in the Hebrides Sector, NW Britain, during the last glaciation (traditional model). However, recent discovery of widespread shelf‐edge moraines in this sector has led to a suggestion of much more extensive ice (Atlantic Shelf model). The position of the St Kilda archipelago, approximately mid‐way between the Outer Hebrides and the continental shelf edge, makes it ideal as an onshore location to test which of the two competing models is more viable. To this end, we (i) reassessed the characteristics, stratigraphy and morphology of the Quaternary sediments exposed on the largest island (Hirta), and (ii) applied time‐dependent 2D numerical modelling of possible glacier formation on Hirta. Instead of three glaciations (as previously suggested), we identified evidence of only two, including one of entirely local derivation. The numerical model supports the view that this glaciation was in the form of two short glaciers occupying the two valleys that dominate Hirta. The good state of preservation of the glacial sediments and associated moraine of this local glaciation indicate relatively recent formation. In view of the low inferred equilibrium line altitude of the glacier associated with the best morphological evidence (～120 m), considerable thickness of slope deposits outside the glacial limits and evidence of only one rather than two tills, a Late Devensian rather than Younger Dryas age is preferred for this glaciation. Re‐examination of the submarine moraine pattern from available bathymetry suggests that the ice sheet was forced to flow around St Kilda, implying that the ice was of insufficient thickness to overrun the islands. Accepting this leaves open the possibility that a St Kilda nunatak supported local ice while the ice sheet extended to the continental shelf edge. 相似文献
15.
笔者首次在塔县的老兵站、石头城和加油站等3处发现了古冰碛物,均呈残留冰碛台地分布,台地高程约为3 100m,表面可见大量正长岩漂砾。漂砾风化穴的主要类型为边墙形、蜂巢型和底穴型。在侵蚀切割该古冰碛物的砂砾层中,得到(62.07±2.44)ka的光释光年龄。同时与附近墓士塔格山和公格尔山古冰川的对比研究,表明该冰碛物时代可能为中更新世倒数第二次冰期,为塔县县城西侧斯顿古冰川向东冰进的产物。该冰碛物的发现具有重要的地质意义:可将斯顿山第四纪冰川遗迹划分为中更新世的倒数第二次冰期、晚更新世的末次冰期,以及全新世的新冰期和小冰期;进一步指示塔什库尔干断裂的左行走滑正断层性质;更新世,斯顿古冰川与墓士塔格冰川各自有明确的界线,不可能形成一个统一的冰盖。 相似文献
16.
This study investigates the variations in erosional processes beneath Briksdalsbreen; a Norwegian valley glacier, with a thin coarse grained deforming bed. The subglacial zone was investigated in situ, close to the central glacial flow line (Site A) and close to the valley wall (Site B), via boreholes. The till was collected using two different sediment samplers and the bed was examined using a borehole video camera. In order to evaluate how representative borehole sampling was of the subglacial environment, the results from in situ subglacial samples were compared with random samples taken from an exposed subglacial surface in the glacier foreland, as well as a sample taken from the site after glacier retreat. The results indicated that the texture of the exposed subglacial surface was similar to in situ samples from subglacial Site B (close to the valley wall), and that the samples collected with the ‘small’ sediment sampler had the closest fit. SEM analysis revealed eroded quartz grains at both sites as a result of rotation (abrasion) and fracture. The samples from close to the valley wall were very poorly sorted, with evidence for rounding and preservation of pre-weathered surfaces, which suggest that a relatively simple pattern of erosion from crushing to rotation dominated. However, the till from the centre of the glacier was better sorted, more angular, and with few pre-weathered surfaces. We suggest that this results from a more complex glacial erosional history associated with greater strain and longer residence time within the deforming layer. When compared with other deformation tills, it was confirmed that there is a relationship between grain size and erosional style. Clay-rich tills show little comminution, fine sand-rich tills generate a significant silt component, whilst the coarse sand-rich tills at Briksdalsbreen showed complex deformational styles but no significant silt component. 相似文献
17.
Quartz microtextures and microstructures owing to deformation of glaciolacustrine sediments in the northern Venezuelan Andes 总被引：1，自引：0，他引：1
W. C. Mahaney R. W. Dirszowsky M. W. Milner J. Menzies A. Stewart V. Kalm M. Bezada 《第四纪科学杂志》2004,19(1):23-33
Glaciolacustrine sediments, ranging in age from Early to Late Mérida (Wisconsinan) in sections in the northern Venezuelan Andes near Pedregal, were studied to assess the effect of small‐scale folding and faulting on the surface microtextures of individual grains. At site PED5, faulting of sediments beneath 35 m of Middle to Late Mérida glaciolacustrine, glaciofluvial and probable till deposits, has resulted in a maximum displacement of 1 m and many crushed sand grains are found along the shear zone. These dominantly quartz particles are typically smoothed and/or faceted with surface skins split from parent grains to produce adhering blade or wafer‐shaped coarse silts. Faulting with displacement of< 40 cm occurs in Late Mérida glaciolacustrine beds at sites PED13 and PED11, beneath ca. 1–5 m of sediment and is thought to result from the removal of lateral support during valley erosion and possibly seismic disturbance. Associated sediments exhibit a greater incidence of small‐scale fold structures and convoluted bedding but with similar numbers and types of crushed grains. All of the fault traces examined exhibit microstructural modifications, including microfaulting, folding and multiple domains associated with fluidisation and liquefaction. The microtextures described are distinct from those produced by glacial or glaciofluvial transport processes and potentially may be used to infer glaciotectonic or other post‐depositional disturbance of sediments. Rare euhedral quartz grains with distorted crystallographic axes may derive from the shear zone of the regional transform Boconó Fault, although many of these grains appear to be overprinted by glacial and/or recent deformation processes. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
18.
石英颗粒表面结构类型以及它们和形成环境间的对应关系,国外已有初步总结[1,2,3]。对石英颗粒表面结构应用于历史环境分析,有着不同的意见[4-6]。多数研究者认为,对于松散的或未固结的沉积物(主要为第四纪的)中的石英颗粒表面结构,具有显著的环境分析意义,而对于地质年代久远、早已半固结或固结成岩的则看法不一,有的则予以否定。因为,地质年代愈老,成岩作用(包括浅变质作用)影响也就愈大。但也有些情况表明[7,8],虽已固结成岩,其物源区的搬运、沉积过程中产生的机械结构,仍然部分或大部分被保存下来,仍可以指示其环境。 相似文献
19.
《Quaternary Science Reviews》2005,24(12-13):1499-1520
The provenance of Late Quaternary Ross Embayment till was investigated by comparing the coarse sand composition of East and West Antarctic source area tills with till samples from across the Ross Sea. The West Antarctic samples from beneath the Whillans (B) and Kamb (C) ice streams are petrologically distinct from samples of lateral moraines flanking several East Antarctic outlet glaciers. The characteristic assemblage of four West Antarctic samples includes felsic intrusive and detrital sedimentary lithic fragments, plagioclase and abundant quartz. In contrast, most of the ten East Antarctic till samples contains abundant mafic intrusive and detrital sedimentary lithic fragments as well as less abundant quartz. The distinctive composition of these source areas can be linked to 33 samples from 20 cores of Last Glacial Maximum (LGM) age till distributed across the Ross Sea. Western Ross Sea till samples exhibit mineralogic and lithological similarities to East Antarctic till samples, although these western Ross Sea tills contain higher percentages of felsic intrusive and extrusive lithic fragments. Eastern Ross Sea till samples are compositionally similar to West Antarctic till, particularly in their abundance of quartz and dearth of mafic and extrusive lithic components. Central Ross Sea till exhibits compositional similarities to both East and West Antarctic source terranes including a mafic lithic component, and marks the confluence of ice draining from East and West Antarctica during the LGM, thus West Antarctic-derived ice streams did not advance into the western Ross Sea. This indicates that even if pre-LGM equivalents of the present Siple Coast ice streams existed, they did not simply expand allowing West Antarctic-derived ice to dominate the LGM Ross Ice Sheet. 相似文献