首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 984 毫秒
1.
The Upper Miocene shales of the Samh Formation, North Marsa Alam along the Egyptian Red Sea coastal plain were analyzed for major and selected trace elements to infer their provenance, weathering intensity, and tectonic setting. The Samh Formation consists of sandstone underlies by shale and marl intercalations. The Samh shales are texturally classified as mudstones. Mineralogically, these shales consist mainly of smectite and kaolinite, associated with non clay minerals (abundant quartz and trace of plagioclase, microcline, and halite). Compared to post-Archaean Australian shales (PAAS), the Samh shales are highly enriched in SiO2, Al2O3, and Fe2O3 and depleted in TiO2, P2O5, Na2O, MgO, and K2O contents. The K2O/Al2O3 ratio values indicate predominance of clay minerals over K-bearing minerals. Trace elements like zirconium (Zr), Cr, Pb, Sc, Rb, and Cs are positively correlated with Al2O3 indicating that these elements are likely fixed in K-feldspars and clays. The Chemical Index of Alteration (CIA), Plagioclase Index of Alteration (PIA), and Chemical Index of Weathering (CIW) values indicate moderate to intense weathering of the source material in a semiarid climate. The geochemistry results suggest that the Samh shales were deposited in a passive margin of a synrift basin and derived from felsic (granitic) source rocks. The inferred tectonic setting for the Upper Miocene Samh shales in Marsa Alam is in agreement with the tectonic evolutionary history of the Eastern Desert of Egypt during the Upper Miocene.  相似文献   

2.
Geochemical composition (major and trace elements) of Miocene sandstones of the Surma Group exposed in Sitapahar anticline, Southeastern Bengal Basin was determined to reveal their provenance, tectonic setting and source area weathering conditions. The sandstones are sub-arkosic, sub-lithic and greywacke in composition with abundant low-grade metamorphic, sedimentary lithics (mainly chert with some shale fragments), low feldspars and little volcanic detritus. Compared to the average sandstone value, the Surma Group sandstones are depleted in CaO and enriched in Al2O3, Fe2O3 and Na2O. The Chemical Index of Alteration (CIA) values for the Miocene Surma Group sandstones vary from 57 to 73 with an average of 65, indicating low to moderate weathering of the source areas. The geochemical characteristics suggest an active continental margin to passive margin setting for the Surma Group sandstones; preserve the signatures of a recycled provenance that is agreement with sandstone petrography and derivation of these sandstones from felsic source rocks.  相似文献   

3.
The sediment geochemistry, including REE, of surface and core samples from Mansar Lake, along with mineralogical investigations, have been carried out in order to understand the provenance, source area weathering, hydrolic sorting and tectonic setting of the basin. The geochemical signatures preserved in these sediments have been exploited as proxies in order to delineate these different parameters.The major element log values (Fe2O3/K2O) vs (SiO2/Al2O3) and (Na2O/K2O) vs (SiO2/Al2O3) demarcate a lithology remarkably similar to that exposed in the catchment area. The chondrite normalized REE patterns of lake samples are similar to Post Archaean Australian Shale (PAAS) with LREE enrichment, a negative Eu anomaly and almost flat HREE pattern similar to a felsic and/or cratonic sedimentary source. However, the La–Th–Sc plot of samples fall in a mixed sedimentary domain, close to Upper Continental Crust (UCC) and PAAS, suggesting sedimentary source rocks for the Mansar detritus. It also indicates that these elements remained immobile during weathering and transportation. The mineralogical characteristic, REEs, and high field strength elements (HFSE), together with the high percentage of metamorphic rock fragments in the Siwalik sandstone, support a metamorphic source for lower Siwalik sediments. A very weak positive correlation between Zr and SiO2, poor negative correlation with Al2O3, negative correlation of (La/Yb)N and (Gd/Yb)N ratios with SiO2 and positive correlation with Al2O3, suggest that Zr does not dominantly control the REE distribution in Mansar sediments. The petrographic character and textural immaturity indicate a short distance transport for the detritus. The distribution of elements in core samples reflect fractionation. The higher Zr/Th and Zr/Yb ratios in coarse sediments and PAAS compared to finer grained detritus indicate sedimentary sorting. Plots of the geochemical data on tectonic discrimination diagrams suggest that the sediments derived from the lower Siwalik were originated within a cratonic interior and later deposited along a passive margin basinal setting. It therefore reveals lower Siwalik depositional history.  相似文献   

4.
Petrography and geochemistry (major, trace and rare earth elements) of clastic rocks from the Lower Cambrian Lalun Formation, in the Posht-e-badam block, Central Iran, have been investigated to understand their provenance. Petrographical analysis suggests that the Lalun conglomerates are dominantly with chert clasts derived from a proximal source, probably chert bearing Precambrian Formations. Similarly, purple sandstones are classified as litharenite (chertarenite) and white sandstones as quartzarenite types. The detrital modes of purple and white sandstones indicate that they were derived from recycled orogen (uplifted shoulders of rift) and stable cratonic source. Most major and trace element contents of purple sandstones are generally similar to upper continental crust (UCC) values. However, white sandstones are depleted in major and trace elements (except SiO2, Zr and Co) relative to UCC, which is mainly due to the presence of quartz and absence of other Al-bearing minerals. Shale samples have considerably lower content in most of the major and trace elements concentration than purple sandstones, which is possibly due to intense weathering and recycling. Modal composition (e.g., quartz, feldspar, lithic fragments) and geochemical indices (Th/Sc, La/Sc, Co/Th, Cr/Th, Cr/V and V/Ni ratios) of sandstones, and shales (La/Sc and La/Cr ratios) indicate that they were derived from felsic source rocks and deposited in a passive continental margin. The chondrite-normalized rare earth element (REE) patterns of the studied samples are characterized by LREE enrichment, negative Eu anomaly and flat HREE similar to an old upper continental crust composed chiefly of felsic components in the source area. The study of paleoweathering conditions based on modal composition, chemical index of alteration (CIA), plagioclase index of alteration (PIA) and A–CN–K (Al2O3 − CaO + Na2O − K2O) relationships indicate that probably chemical weathering in the source area and recycling processes have been more important in shale and white sandstones relative to purple sandstones. The results of this study suggest that the main source for the Lalun Formation was likely located in uplifted shoulders of a rifted basin (probably a pull-apart basin) in its post-rift stage (Pan-African basement of the Posht-e-badam block).  相似文献   

5.
Subaerial weathering level, source area and tectonic environments were interpreted by using petrographic and geochemical characteristics of Eocene age sandstones found in the eastern Pontides. The thickness of Eocene age clastic rocks in the eastern Pontides ranges from 195 to 400 m. Mineralogical components of sandstones were mainly quartz, feldspar, rock fragments, and opaque and accessory minerals. Depending on their matrix and mineralogical content, Eocene age sandstones are identified as arkosic arenite-lithic arenite and feldspathic wacke-lithic wacke. CIA (Chemical Index of Alteration) values observed in the Eocene age sandstones (43–55) suggest that the source terrain of the sandstones was not affected by intense chemical weathering. Low CIW/CIA (Chemical Index of Weathering/Chemical Index of Alteration) values of the sandstones studied here suggest only slightly decomposed material and having undergone little transport until final deposition. Zr/Hf, Th/Sc, La/Sc and CIA ratios are low and demonstrate a mafic source; on the other hand, high LREE/HREE ratios and a slightly negative Eu anomaly indicate a subordinate fclsic source. Modal mineralogical and SiO2/Al2O3 and K2O/Na2O and Th, Zr, Co, Sc of Eocene age sandstone contents indicate that they are probably magmatic arc originated and deposited in the back arc basin.  相似文献   

6.
The upper Kaimur Group (UKG) of the Vindhyan Supergroup in central India, primarily consists of three rock types-Dhandraul sandstone, Scarp sandstone and Bijaigarh shale. The present study aims to reconstruct the parent rock assemblages, their tectonic provenance, mineralogy, weathering intensity, hydraulic sorting and depositional tectonic setting. Samples from the UKG rocks representing the Dhandraul sandstone, Scarp sandstone and Bijaigarh shale were studied using a combination of petrographic, mineralogical, and geochemical techniques. Texturally, medium to coarse grained UKG sandstones are mature and moderate to well sorted. Deficiency of feldspars in these sandstones indicates that the rocks are extensively recycled from distant sources. Their average modal composition for Scarp (avg. Qt99 F0.2L0.8) and Dhandraul (avg. Qt99 F0.1L0.8) sandstones, classifies them as quartz arenite to sub-litharenite types, which is consistent with geochemical study. Major element concentrations revealed that sandstones have high SiO2, K2O < Na2O, and low Fe2O3, which are supported by the modal data. On the other hand, sandstone samples are enriched in most trace elements such as Ce, Sr, V, Sc and Zr and depleted in U and Th. The CIA values (43.17–76.48) of the UKG rocks indicate low to moderate weathering, either of the original source or during transport before deposition, which may have related to low-relief and humid climatic conditions in the source area. Further, petrographic and geochemical interpretations indicate that they are derived from craton interior to quartzose recycled sedimentary rocks and deposited in a passive continental margin. Therefore, granitic and low grade metamorphic rocks of Mahakoshal Group and Chotanagpur granite-gneiss, situated on the southern and south-eastern side of the Vindhyan basin are suggested as possible provenance for the UKG rocks.  相似文献   

7.
The sandstones of the Ridge and Athleta members of Chari Formation (Callovian-Oxfordian) exposed at Jara have been analyzed for their petrographical and geochemical studies. Texturally, these sandstones are medium to coarse grained, poorly to well sorted, sub-angular to sub-rounded, and show low to medium sphericity. These sandstones were derived from a mixed provenance including granites, granite-gneisses, low and high-grade metamorphic, and some basic rocks of Aravalli range and Nagarparkar massif. The petrofacies analysis reveals that these sandstones belong to the continental block and recycled orogen tectonic regime. The studied sandstones are modified by paleoclimate, distance of transport, and diagenesis. Mineralogically and geochemically, sandstones are classified as quartzarenite, subarkose, arkose, sublithic arenite, and wacke, respectively. The A-CN-K ternary plot and CIA, CIW, PIA, and ICV values suggest that the similar source rocks suffered moderate to high chemical weathering under a hot-humid climate in an acidic environment with higher \({\text{P}}_{{{\text{CO}}_{ 2} }}\). Generally good to strong correlations between Al2O3 and other oxides in these sediments indicate clay mineral control. The K2O/Na2O versus SiO2 diagram indicates that the studied samples occupy passive margin fields but the SiO2/Al2O3 versus K2O/Na2O plot suggests that the Athleta Sandstone and Ridge Sandstone fall within the passive margin field, while Ridge Shale falls within the active continental margin field.  相似文献   

8.
The geochemical investigation of sediments deposited in the Renuka Lake basin and its adjoining wetland has shown variation in the distribution and concentration of major, trace and REEs. The major elements are depleted in the lake in relation to wetland and that of Post Archaean Australian, Shale (PAAS), except for CaO which is strikingly in excess and has a dilution effect on SiO2 and other oxides and trace elements. The Wetland sediments, on the other hand, are enriched in Al2O3, Fe2O3, K2O and TiO2 and the latter three show a positive correlation with Al2O3 in both wetland and lake sediments suggesting their association with phyllosilicates and similar source rocks. The enrichment of Y, Zr, Ni, Th, U and Nb in wetland compared to lake and their similarity with PAAS in the former, suggests more clay fractions in the wetland. A high Zr/Hf ratio in wetland and lake sediments and a positive correlation of Zr with Y and HREE indicate Zr control on HREEs. However, higher Zr/Yb and Zr/Th ratios in wetland compared to lake indicate mineral sorting during the process of lighter particles (clays) being trapped in wetland soil. This is also reflected from negative correlation of GdN/YbN with Al2O3 and a strong positive correlation with SiO2 in wetland sediments. The wetland in this context has a control on lake sediment chemistry. The chondrite normalized REE patterns are essentially the same for lake as well as wetland sediments but abundance decreases in the former. The similarity of pattern with that of PAAS and negative Eu anomaly indicates a cratonic source of sediments. In a plot of the individual samples, wetland samples cluster while lake samples are separated indicating fractionation of lake sediments. A strong positive correlation of LaN/YbN with Al2O3 and a positive correlation of Zr-∑LREE and Zr-LaN/YbN suggest that LREEs are controlled by both phyllosilicates and zircon. The chemical index of alteration (CIA) indices in lake sediments and in wetland are higher than PAAS indicating moderate chemical weathering in the source area. The petrography, lack of felsic magmatic rock fragments, and negative correlation between Zr-(Gd/Yb)C indicate sedimentary source rocks for the detritus. This is in conformity with the Lesser Himalayan sedimentary sequence belonging to neo-Proterozoic–Proterozoic age and constituting lake catchment of Renuka. The tectonic delineation and discriminant function plots of lake and wetland sediments indicate their cratonic and/or quartzose sedimentary orogenic terrain source that has been deposited in a passive margin setting.  相似文献   

9.
The mineralogical and geochemical characteristics of the Upper Triassic Baluti shale from the Northern Thrust Zone (Sararu section) and High Folded Zone (Sarki section) Kurdistan Region, Iraq, have been investigated to constrain their paleoweathering, provenance, tectonic setting, and depositional redox conditions. The clay mineral assemblages are dominated by kaolinite, illite, mixed layers illite/smectite at Sararu section, and illite > smectite with traces of kaolinite at Sarki. Illite, to be noted, is within the zone of diagenesis. The non-clay minerals are dominated by calcite with minor amounts of quartz and muscovite in Sararu shale; and are dominated by dolomite with amounts of calcite and quartz in Sarki shale. Baluti shale is classified as Al-rich based on major and minor elements. The chemical index of alteration (CIA) is significantly higher in the Sararu than the Sarki shales, suggesting more intense weathering of the Sararu than the Sarki shales. The index of compositional variability (ICV) of the Sararu shale is less than 1 (suggesting it is compositionally mature and was deposited in a tectonically quiescent setting). More than 1 for Sarki shales (suggest it is less mature and deposited in a tectonically active setting). Most shale of the Baluti plot parallel and along the A-K line in A-CN-K plots suggest intense chemical weathering (high CIA) without any clear-cut evidence of K-metasomatism. Clay mineral data, Al enrichment, CIA values, and A-CN-K plot suggest that the source area experienced high degree of chemical weathering under warm and humid conditions, especially in Sararu. Elemental ratios critical of provenance (La/Sc, Th/Sc, Th/Cr, Th/Co, Ce/Ce*PN, Eu/Eu*PN, and Eu/Eu*CN) shows slight difference between the Sararu and Sarki shales; and the ratios are similar to fine fractions derived from the weathering of mostly felsic rocks. The Eu/Eu* CN, Th/Sc, and low K2O/Al2O3 ratios of most shales suggest weathering from mostly a granodiorite source rather than a granite source, consistent with a source from old upper continental crust. Discrimination diagrams based on major and trace element content point to a role of the felsic-intermediate sources for the deposition of Baluti Formation, and probably mixed with mafic source rocks at Sararu section. The chondrite-normalized rare earth elements (REE) patterns are similar to those of PAAS, with light REE enrichment, a negative Eu anomaly, and almost flat heavy REE pattern similar to those of a source rock with felsic components. The source of sediments for the Baluti Formation was likely the Rutba Uplift and/or the plutonic-metamorphic complexes of the Arabian Shield located to the southwest of the basin; whereas the Sararu shale was affected by the mafic rocks of the Bitlis-Avroman-Bisitoun Ridge to the northeast of Arabian Plate. The tectonic discrimination diagrams, as well as critical trace and REE characteristic parameters imply rift and active setting for the depositional basin of the shale of Baluti Formation. The geochemical parameters such as U/Th, V/Cr, V/Sc, and Cu/Zn ratios indicate that these shales were deposited under oxic environment and also show that Sarki shale was deposited under more oxic environment than Sararu.  相似文献   

10.
Sandstones of Punagarh basin of Trans Aravalli region, NW Indian shield were analyzed for their major and trace element contents in conjunction with petrographic modes. The Punagarh basin comprises four formations (Sojat, Bambolai, Khamal and Sowania), amongst which the Sojat Formation in uncoformable contact with overlying formations, is significantly older and enjoys separate status as rest of the formations constitute Punagarh Group. Petrographic attributes suggest that Sojat sandstones contain distinct modal abundances like high content of quartz and low content of feldspar, mica, matrix, rock fragments and cement. In general there is a decrease in the average modal abundance of quartz and mica with concomitant increase of feldspar, chert and rock fragments from base to top in Punagarh sandstones. Sojat sandstones are also geochemically distinct as they possess high SiO2/Al2O3, Th/U and Cr/Th ratios coupled with lowest Na2O/K2O ratio and Zr content, least fractionated LREE, more fractionated HREE and largest Eu* anomaly compared to Punagarh sandstones. The weathering indices suggest intense chemical weathering for Sojat sandstones and low to moderate for Punagarh sandstones. Compositionally all the sandstones of the Punagarh basin come under the category of quartzarenite. Compared to PAAS and UCC, both suite of sandstones are generally depleted in REE, HFSE (with exception of Zr, Hf and Ta), and enriched in ferromagnesian trace elements particularly Cr and Co. The chemical data indicate that the sediments were derived from the source(s) of mixed felsic - mafic composition, with the former being dominant. The source rocks were granites, TTG, basalts, and rhyolites. The Sojat sandstones owe their source form Archean crust while Punagarh sandstones got detritus from Mesoproterozic crust. Immobile element ratios and REE abundances of Sojat sandstones closely match with Paleoproterozoic metagreywackes of Ghana of African craton while Punagarh sandstones show near geochemical characteristic with Gogunda, Kumbalgarh and Vindhyan quartzites of Aravalli craton. This geochemical similarity of Sojat sandstones provides credence to the hypothesis that Trans–Aravalli region of India had been an integral part of Arabian - Nubian shield. The chemical data advocate the deposition of these sandstones in a tectonic setting comparable to modern back arc setting.  相似文献   

11.
Petrographic and geochemical data on the sandstones of the Proterozoic intracratonic Kaladgi–Badami basin, southern India are presented to elucidate the palaeoweathering pattern, and composition and tectonics of their provenance. The Kaladgi–Badami basin, hosting the Kaladgi Supergroup, occupies an E–W trending area. The Supergroup unconformably overlies Archaean basement TTG gneisses, granites and greenstones, comprises a cyclic arenite–pelite–carbonate association and is divided into the Bagalkot and Badami Groups. The immature arkosic character of the basal Saundatti Quartzite Member (Bagalkot Group) containing fresh and angular feldspars, along the northern margin of the basin, suggests that during the initial stage of deposition, this part of the basin received sediments from a restricted, uplifted and less weathered source dominated by K-rich granites occurring to the north. In contrast, the Saundatti Quartzite along the southern margin displays a mostly mature, quartz-rich character with less abundant but severely weathered feldspars, and higher SiO2 and CIA but lower Al2O3, TiO2, Rb, Sr, Ba, K2O, K2O/Na2O, Zr/Ni and Zr/Cr. This is interpreted in terms of a tectonically stable, considerably weathered mixed source (Archaean gneisses, granites and greenstones) along the southern fringe of the basin. The highly mature (quartz arenite) Muchkundi Quartzite Member (also of the Bagalkot Group), occurring higher up in the succession, exhibits minor but severely altered feldspars, and higher SiO2, Na2O, CIA, Cr and Ni with lower K2O, Al2O3, TiO2 and K2O/Na2O. This reflects that with the passage of time the source evolved to a uniform, extensively weathered, tectonically stable peneplained provenance which consisted of less evolved TTG gneisses and greenstones. This was followed by closure, deformation and upliftment of the basin hosting the Bagalkot Group and subsequent deposition of the Badami Group. Sandstone Members of this younger Group (Cave-Temple Arenite and Belikhindi Arenite) range widely in mineralogy (quartz arenite to arkose) and chemistry (including CIA), and point to a source that varied from uplifted, less weathered K-rich granites to less evolved, peneplained TTG gneisses and greenstones or even Bagalkot sediments. Variable alteration of feldspars in the Kaladgi sandstones and severe depletion of Ca, Na and Sr in the associated shales indicate a humid tropical (tropical and subtropical) climate facilitating chemical weathering.  相似文献   

12.
The provenance of the Upper Cretaceous Nubia sandstones from four vertical sections along Qena-Safaga and Qena-Quseir roads in central Eastern Desert of Egypt was investigated based on their modal composition and geochemical data. The Nubia sandstone samples are abundant in quartz content with low feldspar and lithic fragments. Their average modal composition (Q94.2F1.3R4.5) classifies them as quartz arenites with subordinate quartz wackes which is consistent with geochemistry data. The average CIA, CIW, PIA, and Th/U ratio values revealed that the intensity of weathering in the studied areas was similar, varying from moderate to intensive weathering, and may reflect low-relief and warm humid climatic conditions in the source area. The ICV (<?1) and SiO2/Al2O3 ratio (>?5) indicate that the Nubia sandstones are texturally and mineralogically mature. The petrographical and geochemical analyses suggest that the Nubia sandstones were mainly derived from felsic (granitic) and/or recycled sand sources. The major element-based multidimensional tectonic discrimination diagrams suggested the Nubia sandstones were deposited in a passive continental margin of a syn-rift basin. This result agreed with the general geology of central Eastern Desert of Egypt during the Upper Cretaceous.  相似文献   

13.
The petrography, heavy mineral analysis, major element geochemical compositions and mineral chemistry of Early Cretaceous to Miocene–Pliocene rocks, and recent sediments of the Tarfaya basin, SW Morocco, have been studied to reveal their depositional tectonic setting, weathering history, and provenance. Bulk sediment compositional and mineral chemical data suggest that these rocks were derived from heterogeneous sources in the Reguibat Shield (West African Craton) including the Mauritanides and the western Anti-Atlas, which likely form the basement in this area. The Early Cretaceous sandstones are subarkosic in composition, while the Miocene–Pliocene sandstones and the recent sediments from Wadis are generally carbonate-rich feldspathic or lithic arenites, which is also reflected in their major element geochemical compositions. The studied samples are characterized by moderate SiO2 contents and variable abundances of Al2O3, K2O, Na2O, and ferromagnesian elements. Binary tectonic discrimination diagrams demonstrate that most samples can be characterized as passive continental marginal deposits. Al2O3/Na2O ratios indicate more intense chemical weathering during the Early Cretaceous and a variable intensity of weathering during the Late Cretaceous, Early Eocene, Oligocene–Early Miocene, Miocene–Pliocene and recent times. Moreover, weathered marls of the Late Cretaceous and Miocene–Pliocene horizons also exhibit relatively low but variable intensity of chemical weathering. Our results indicate that siliciclastics of the Early Cretaceous were primarily derived from the Reguibat Shield and the Mauritanides, in the SW of the basin, whereas those of the Miocene–Pliocene had varying sources that probably included western Anti-Atlas (NE part of the basin) in addition to the Reguibat Shield and the Mauritanides.  相似文献   

14.
The geochemical study of the Dankar, Thinam and Gete lakes of the Spiti Valley has revealed that these lakes are characterized by varying contents of major ions, i.e. Ca, Mg, HCO3, Na, K, Cl, SO4, SiO2 and Sr as trace element. The concentration of these elements is significant, as they indicate the nature of the lithology and the type of weathering at the source. The sediment chemistry data have also been employed to quantify weathering intensity and to elucidate the provenance and basin tectonic setting where terrigenous sediment is deposited.Dankar Lake is located on the limestone-dolomite-rich Lilang Group of rocks (Triassic), and dissolution of carbonate is the prime source of ionic concentration in this lake. The high (Ca+Mg):HCO3 equivalent ratio of 6.94 indicates carbonate weathering, and the very low (Na+K):TZ+ ratio of 0.07, which is used as an indicator of silicate weathering, shows insignificant silica dissolution in this lake. On the other hand, in Lake Thinam a relatively low (Ca+Mg):HCO3 equivalent ratio of 2.09, a (Na+K):TZ+ ratio of 0.12 and other parameters indicate that carbonate is derived from calcareous nodules and thin intercalations of limestone in the Spiti shales (Jurassic), and also some contribution from silicate lithology is evident. Mixing of groundwater cannot be ruled out, as springs are observed in this lake. In Lake Gete, the (Ca+Mg):HCO3 equivalent ratio is again high at 5.04, and the (Na+K):TZ+ ratio is 0.15, indicating dissolution of both carbonate and silicate rocks in the basin. This is consistent with the corresponding lithology in the lakes, and their denudation. Very high Sr contents of 2,331 µg/l in Dankar Lake, 715 µg/l in Gete Lake and 160 µg/l in Thinam Lake are significant and support dissolution of carbonate rocks, as the silicate rocks contribute less Sr although its isotopic ratio is high. It is also reflected that mechanical erosion and chemical weathering are perhaps the effective processes in this region. The former exposes fresh mineral surface for dissolution. The chemical index of alteration (CIA), with an average value of 78.79 in Dankar and 81.06 in Gete, indicates high weathering conditions. The K2O–Fe2O3–Al2O3 triangular plots of the samples demonstrate residual clay formation, indicating intense weathering at the source. The clay mineralogical data corroborate the above observation.The sediment chemistry data document depletion in SiO2 and Al2O3, as they are enriched in carbonates and depleted in Na2O, K2O, MnO, and TiO2, as compared to PAAS and UCC which are related to strong weathering at the source. The positive linear correlation between K and Rb suggests that they are contained in the illitic phase, and high positive correlation of Zr and Y with SiO2 indicates their association with coarser-grain, quartz-rich sandstone. The high phyllosilicates and low feldspar and major element chemistry indicate recycling and mineral maturity of sediments deposited in the Tethyan basin in a passive margin setting. This also indicates older sedimentary-metasedimentary rocks which are ideally exposed in the Spiti Valley. The tectonic discriminant plots portray a passive margin tectonic setting of the detritus in these lakes.  相似文献   

15.
Comprehensive lithogeochemical analysis is carried out for Norian sediments from the central part of the Kular–Nera shale belt. The sediments are represented by alternation of sandstones and siltstones. Petrochemical typification shows that the sandstones are subdivided into graywacke, arkose, and subarenite, while the siltstones belong to shale. The Norian sediments were mainly deposited in an oxidizing environment of a well-aerated basin in the distal parts of the Verkhoyansk passive continental margin. They are characterized by a high sorting of sedimentary material. The correlation between the rock-forming elements and the wide range of (La/Yb) n ratios indicate that the sedimentation basin contained the disintegration products of both acid [(La/Yb) n = 10.52–27.26] and mafic [(La/Yb] n = 6.22–8.96)] rocks. The high values of the La/Sc and Th/Co ratios are typical of acid rocks. The low K2O/Al2O3 values (0.16 ± 0.02) and high Zr/Sc ratio (10.1 ± 2.74) are typical of redeposited material. It is established that several provenances were involved in the formation of the Norian sediments in the central part of the Kular–Nera shale belt. Multicomponent clastics and well-sorted recycled material were supplied into the sedimentation basin.  相似文献   

16.
甘肃景泰一带早奥陶世沉积了以浊流砂岩夹板岩为主的阴沟组。崔家墩剖面阴沟组较为发育,总体分为两个岩性段,但东西向逆冲断层造成地层垂向不连续。北段（下段）为粉-细砂岩、板岩夹硅质岩;南段（上段）为岩屑含量较多的岩屑砂岩夹板岩,硅质岩少或无。对阴沟组砂岩进行主化学组分特征分析,其特征指标：Fe2O*3+MgO值为503%～17.63%,Al2O3/SiO2值为0.12%～0.28%,K2O/Na2O值为0.25%～1.26%及 Al2O3/（CaO+Na2O）值为1.01%～3.53%。利用砂岩的化学组分特征结合岩相学分析,可以判断物源区特征及大地构造背景。研究表明:该套浊积砂岩下部物源主要来自北部的阿拉善地块及该地块上的古老造山带,为被动大陆边缘背景;上部碎屑主要来自南侧岛弧中基性火山岩,为活动大陆边缘初始弧后盆地构造背景。  相似文献   

17.
The Upper Kaimur Group of the Vindhyan Supergroup in Central India, primarily consists of three rock types-DhandraulSandstone, Scarp Sandstone and Bijaigarh Shale. Mineralogically and geochemically, they are quartz arenite, sublitharenite to litharenite and litharenite to shale in composition, respectively. The A-CN-K ternary plot and CIA and ICV values suggest that the similar source rocks suffered severe chemical weathering, under a hot-humid climate in an acidic environment with higher P CO 2, which facilitated high sediment influx in the absence of land plants. Various geochemical discriminants, elemental ratios like K2O/Na2O, Al2O3/TiO2, SiO2/MgO, La/Sc, Th/Sc, Th/Cr, GdN/YbN and pronounced negative Eu anomalies indicate the rocks to be of post-Archean Proterozoic granitic source, with a minor contribution of granodioritic input, in a passive margin setting. The sediments of the Upper Kaimur Group were probably deposited in the interglacial period in between the Paleoproterozoic and Neoproterozoic glacial epochs.  相似文献   

18.
《Gondwana Research》2001,4(3):529-540
Geochemical studies on radioactive arkoses (43–153 ppm U and 387–862 ppm Th) of the Proterozoic Pakhal Supergroup from Bangaruchilka, Khammam district, Andhra Pradesh, India, indicate that their gross major and trace element chemistry reflect their mineral composition. Chemically, arkoses are rich in silica (83% to 88% SiO2) and potassium (3% to 5% K2O), with consistently high Al2O3/Na2O (36 to 50) and K2O/Na2O (18 to 25) ratios, which indicate that they are chemically mature sediments. The arkoses also show higher concentrations of Ti, V, Cr, Ni, Cu, Y, Zr, Nb, La and Pb.The values (60% to 68%) of chemical alteration index (CIA) of studied arkoses are moderate, and indicate that the source rocks have undergone lesser degree of chemical weathering. Tectonic setting discriminate plots of Fe2O3 (total)/MgO vs. TiO2 and Al2O3/SiO2, and K2O/Na2O vs. SiO2 and SiO2/Al2O3 indicate that the Bangaruchilka arkoses represent the sediments that were deposited in passive continental margin (PM), which is further supported by association of platformal type of sediments (quartzites and phyllites) with them. Unlike middle Archaean sedimentary rocks, the studied arkoses are depleted in Na2O, MgO and CaO, and distinctly enriched in SiO2 and K2O. These geochemical features match with post-Archaean clastic sediments, which argues for the involvement of late Archaean granitic crust in supply of detritus of studied arkoses. Enrichment of potassium alongwith abundant microcline and elevated concentrations of Y, Zr, Nb, U, Th, La, etc. in arkoses indicate K-rich evolved granitoid upper crust in the provenance during the late Archaean-early Proterozoic period.Dominance of mechanical weathering over chemical weathering favoured arkose formation, and also transfer of radio-elements with clastic sediments into the Pakhal basin. After sedimentation, uranium seems to have been remobilised from the rocks of Archaean-Pakhal system, consequent to post-sedimentation structural disruptions, and concentrated along suitable structural loci. Therefore, it is likely to encounter significant concentration of uranium in close proximity of unconformable Archaean and Pakhal contacts and tectonic zones, thereby making Pakhal basin and its environs a suitable terrain to search for concealed uranium mineralisation.  相似文献   

19.
Sandstones from the Neoproterozoic Jinshanzhai Formation in northern Anhui Province, China, were analyzed for major oxides and trace elements to infer their provenance, the intensity of paleo-weathering of their source rocks and the depositional tectonic setting. Diagrams of (SiO2/20)-(Na2O+K2O)-(MgO+TiO2+FeO*), TiO2-Ni, Th-Hf-Co, Hf-La/Th and some ratios of elements indicate that felsic rocks constitute the source rocks in the provenance. The values of Chemical Index of Alteration (CIA) are low, which are considered to be affected by K-metasomatism. Whereas the high CIW (Chemical Index of Weathering) values indicate intensive weathering of the source material. Plots of sandstones on bivariate and triangle discriminant diagrams, as well as ICV (Index of Compositional Variation) values revealed that they were deposited on a passive continental margin or in an intra-plate basin. Our recent study, in combination with previous studies and the research progress of the Rodinia super continent, demonstrated that the convergence and extension of the Rodinia super continent were preserved by twice extension as expressed by petrological variation of the southeastern margin of the North China Craton (NCC) during the Neoproterozoic.  相似文献   

20.
The present study is focused on the geochemical characterization and provenance of the shale member of the Maastrichtian Patti Formation which is well represented at the centre of the southern Bida Basin in Nigeria. The major element composition of the studied shales and clays compare favourably with the reference shales, however, the trace elements vary slightly. Application of binary plot of TiO2 versus Al2O3 and Al2O3/TiO2 ratios of the studied shale samples show mixed mafic to felsic igneous sources. The chemical composition (plot of SiO2 versus Log (K2O/Na2O) indicates active to passive continental margin province, however, a minor derivation from recycled provenance is probable. Intense chemical weathering based on the high values of Chemical Index Alteration (CIA), Chemical Index of Weathering (CIW) and Zr values obtained from the shale and clay samples a warm humid condition is suggested. The high values also probably suggest predominance of clay minerals and low feldspar. This is supported by the XRD (X-Ray Diffractometer) data which indicates predominance of kaolinite in the samples.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号