共查询到20条相似文献，搜索用时 46 毫秒
1.
We present results from low-temperature heat capacity measurements of spinels along the solid solution between MgAl2O4 and MgCr2O4. The data also include new low-temperature heat capacity measurements for MgAl2O4 spinel. Heat capacities were measured between 1.5 and 300 K, and thermochemical functions were derived from the results.
No heat capacity anomaly was observed for MgAl2O4 spinel; however, we observe a low-temperature heat capacity anomaly for Cr-bearing spinels at temperatures below 15 K. From
our data we calculate standard entropies (298.15 K) for Mg(Cr,Al)2O4 spinels. We suggest a standard entropy for MgAl2O4 of 80.9 ± 0.6 J mol−1 K−1. For the solid solution between MgAl2O4 and MgCr2O4, we observe a linear increase of the standard entropies from 80.9 J mol−1 K−1 for MgAl2O4 to 118.3 J mol−1 K−1 for MgCr2O4. 相似文献
2.
Planewave pseudopotential calculations of supercell total energies were used as bases for first-principles calculations of
the CaCO3–MgCO3 and CdCO3–MgCO3 phase diagrams. Calculated phase diagrams are in qualitative to semiquantitative agreement with experiment. Two unobserved
phases, Cd3Mg (CO3)4 and CdMg3(CO3)4, are predicted. No new phases are predicted in the CaCO3–MgCO3 system, but a low-lying metastable Ca3Mg(CO3)4 state, analogous to the Cd3Mg(CO3)4 phase is predicted. All of the predicted lowest-lying metastable states, except for huntite CaMg3(CO3)4, have dolomite-related structures, i.e. they are layer structures in which A
m
B
n
cation layers lie perpendicular to the rhombohedral [111] vector.
Received: 6 May 2002 / Accepted: 23 October 2002
Acknowledgements This work was partially supported by NSF contract DMR-0080766 and NIST. 相似文献
3.
4.
Shigeto Hirai Yohei Kojima Hiroaki Ohfuji Norimasa Nishiyama Tetsuo Irifune Stephan Klemme Geoffrey Bromiley J. Paul Attfield 《Physics and Chemistry of Minerals》2011,38(8):631-637
Raman spectroscopy and heat capacity measurements have been used to study the post-perovskite phase of CaIr0.5Pt0.5O3, recovered from synthesis at a pressure of 15 GPa. Laser heating CaIr0.5Pt0.5O3 to 1,900 K at 60 GPa produces a new perovskite phase which is not recoverable and reverts to the post-perovskite polymorph
between 20 and 9 GPa on decompression. This implies that Pt-rich CaIr1−xPtxO3 perovskites including the end member CaPtO3 cannot easily be recovered to ambient pressure from high P–T synthesis. We estimate an increase in the thermodynamic Grüneisen
parameter across the post-perovskite to perovskite transition of 34%, of similar magnitude to those for (Mg,Fe)SiO3 and MgGeO3, suggesting that CaIr0.5Pt0.5O3 is a promising analogue for experimental studies of the competition in energetics between perovskite and post-perovskite
phases of magnesium silicates in Earth’s lowermost mantle. Low-temperature heat capacity measurements show that CaIrO3 has a significant Sommerfeld coefficient of 11.7 mJ/mol K2 and an entropy change of only 1.1% of Rln2 at the 108 K Curie transition, consistent with the near-itinerant electron magnetism. Heat capacity results for post-perovskite
CaIr0.5Rh0.5O3 are also reported. 相似文献
5.
The crystal structure of the unstable mineral alumoklyuchevskite K3Cu3AlO2(SO4)4 [monoclinic, I2, a = 18.772(7), b = 4.967(2), c = 18.468(7) Å, β = 101.66(1)°, V = 1686(1) Å] was refined to R 1 = 0.131 for 2450 unique reflections with F ≥ 4σF hkl. The structure is based on oxocentered tetrahedrons (OAlCu 3 7+ ) linked into chains via edges. Each chain is surrounded by SO4 tetrahedrons forming a structural complex. Each complex is elongated along the b axis. This type of crystal structure was also found in other fumarole minerals of the Great Tolbachik Fissure Eruption (GTFE, Kamchatka Peninsula, Russia, 1975–1976), klyuchevskite, K3Cu3Fe3+O2(SO4)4; and piypite, K2Cu2O(SO4)2. 相似文献
6.
Dmytro M. Trots Alexander Kurnosov Leonid Vasylechko Marek Berkowski Tiziana Boffa Ballaran Daniel J. Frost 《Physics and Chemistry of Minerals》2011,38(7):561-567
A single crystal X-ray diffraction study on lithium tetraborate Li2B4O7 (diomignite, space group I41
cd) has been performed under pressure up to 8.3 GPa. No phase transitions were found in the pressure range investigated, and
hence the pressure evolution of the unit-cell volume of the I41
cd structure has been described using a third-order Birch–Murnaghan equation of state (BM-EoS) with the following parameters:
V
0
= 923.21(6) Å3, K
0
= 45.6(6) GPa, and K′ = 7.3(3). A linearized BM-EoS was fitted to the axial compressibilities resulting in the following parameters a
0
= 9.4747(3) Å, K
0a
= 73.3(9) GPa, K′
a
= 5.1(3) and c
0
= 10.2838(4) Å, K
0c
= 24.6(3) GPa, K′
c
= 7.5(2) for the a and c axes, respectively. The elastic anisotropy of Li2B4O7 is very large with the zero-pressure compressibility ratio β
0c
/β
0a
= 3.0(1). The large elastic anisotropy is consistent with the crystal structure: A three-dimensional arrangement of relatively
rigid tetraborate groups [B4O7]2− forms channels occupied by lithium along the polar c–axis, and hence compression along the c axis requires the shrinkage of the lithium channels, whereas compression in the a direction depends mainly on the contraction of the most rigid [B4O7]2− units. Finally, the isothermal bulk modulus obtained in this work is in general agreement with that derived from ultrasonic
(Adachi et al. in Proceedings-IEEE Ultrasonic Symposium, 228–232, 1985; Shorrocks et al. in Proceedings-IEEE Ultrasonic Symposium, 337–340, 1981) and Brillouin scattering measurements (Takagi et al. in Ferroelectrics, 137:337–342, 1992). 相似文献
7.
8.
Magnetisation measurements were performed on the synthetic analogue of stannite, Cu2FeSnS4, in order to characterise the antiferromagnetic transition at low temperature, evidenced by Bernardini et al. (2000). Temperature and field dependence of the material were checked by means of static magnetisation measurements, carried out scanning the magnetic fields up to 12 T and temperatures in the range 1.4–20 K, while ac susceptibility data were collected at different frequencies ranging from 1.8 to 510 Hz. Both static and dynamic magnetisation data, performed above and below the Néel temperature, 6.1(2) K, confirm stannite to order antiferromagnetically at a long-range scale. Moreover, an increase of both the magnetic anisotropy and the exchange interaction, with respect to the Mn-analogue (Fries et al. 1997), has been observed. 相似文献
9.
V. L. Vinograd O. G. Safonov D. J. Wilson L. L. Perchuk L. Bindi J. D. Gale B. Winkler 《Petrology》2010,18(4):447-459
Atomistic model was proposed to describe the thermodynamics of mixing in the diopside-K-jadeite solid solution (CaMgSi2O6-KAlSi2O6). The simulations were based on minimization of the lattice energies of 800 structures within a 2 × 2 × 4 supercell of C2/c diopside with the compositions between CaMgSi2O6 and KAlSi2O6 and with variable degrees of order/disorder in the arrangement of Ca/K cations in M2 site and Mg/Al in Ml site. The energy
minimization was performed with the help of a force-field model. The results of the calculations were used to define a generalized
Ising model, which included 37 pair interaction parameters. Isotherms of the enthalpy of mixing within the range of 273–2023
K were calculated with a Monte Carlo algorithm, while the Gibbs free energies of mixing were obtained by thermodynamic integration
of the enthalpies of mixing. The calculated T-X diagram for the system CaMgSi2O6-KAlSi2O6 at temperatures below 1000 K shows several miscibility gaps, which are separated by intervals of stability of intermediate
ordered compounds. At temperatures above 1000 K a homogeneous solid solution is formed. The standard thermodynamic properties
of K-jadeite (KAlSi2O6) evaluated from quantum mechanical calculations were used to determine location of several mineral reactions with the participation
of the diopside-K-jadeite solid solution. The results of the simulations suggest that the low content of KalSi2O6 in natural clinopyroxenes is not related to crystal chemical factors preventing isomorphism, but is determined by relatively
high standard enthalpy of this end member. 相似文献
10.
M. Zhang G. J. Redhammer E. K. H. Salje M. Mookherjee 《Physics and Chemistry of Minerals》2002,29(9):609-616
Synthetic aegirine LiFeSi2O6 and NaFeSi2O6 were characterized using infrared spectroscopy in the frequency range 50–2000 cm−1, and at temperatures between 20 and 300 K. For the C2/c phase of LiFeSi2O6, 25 of the 27 predicted infrared bands and 26 of 30 predicted Raman bands are recorded at room temperature. NaFeSi2O6 (with symmetry C2/c) shows 25 infrared and 26 Raman bands. On cooling, the C2/c–P21/c structural phase transition of LiFeSi2O6 is characterized by the appearance of 13 additional recorded peaks. This observation indicates the enlargement of the unit
cell at the transition point. The appearance of an extra band near 688 cm−1 in the monoclinic P21/c phase, which is due to the Si–O–Si vibration in the Si2O6 chains, indicates that there are two non-equivalent Si sites with different Si–O bond lengths. Most significant spectral
changes appear in the far-infrared region, where Li–O and Fe–O vibrations are mainly located. Infrared bands between 300 and
330 cm−1 show unusually dramatic changes at temperatures far below the transition. Compared with the infrared data of NaFeSi2O6 measured at low temperatures, the change in LiFeSi2O6 is interpreted as the consequence of mode crossing in the frequency region. A generalized Landau theory was used to analyze
the order parameter of the C2/c–P21/c phase transition, and the results suggest that the transition is close to tricritical.
Received: 21 January 2002 / Accepted: 22 July 2002 相似文献
11.
L. A. Olsen K. Friese E. Makovicky T. Balić-Žunić W. Morgenroth A. Grzechnik 《Physics and Chemistry of Minerals》2011,38(1):1-10
The crystal structure of Pb6Bi2S9 is investigated at pressures between 0 and 5.6 GPa with X-ray diffraction on single-crystals. The pressure is applied using diamond anvil cells. Heyrovskyite (Bbmm, a = 13.719(4) Å, b = 31.393(9) Å, c = 4.1319(10) Å, Z = 4) is the stable phase of Pb6Bi2S9 at ambient conditions and is built from distorted moduli of PbS-archetype structure with a low stereochemical activity of the Pb2+ and Bi3+ lone electron pairs. Heyrovskyite is stable until at least 3.9 GPa and a first-order phase transition occurs between 3.9 and 4.8 GPa. A single-crystal is retained after the reversible phase transition despite an anisotropic contraction of the unit cell and a volume decrease of 4.2%. The crystal structure of the high pressure phase, β-Pb6Bi2S9, is solved in Pna2 1 (a = 25.302(7) Å, b = 30.819(9) Å, c = 4.0640(13) Å, Z = 8) from synchrotron data at 5.06 GPa. This structure consists of two types of moduli with SnS/TlI-archetype structure in which the Pb and Bi lone pairs are strongly expressed. The mechanism of the phase transition is described in detail and the results are compared to the closely related phase transition in Pb3Bi2S6 (lillianite). 相似文献
12.
13.
The position of hydrogen in the structure of topaz-OH was determined by means of ab-initio quantum-mechanic calculations. Static lattice energy calculations predict the existence of four non-equivalent positions of protons, which are characterized by O4–H1... O1, O4–H2... O2, O4–H3... O3 and O4–H4... O4 hydrogen bonds. The distribution of the protons between positions of local equilibrium is controlled by the proton–proton avoidance rule and the strength of the hydrogen bonds. The most favourable configuration of hydrogen atoms is achieved for adjacent protons, which form O4–H3... O3 and O4–H4... O4 hydrogen bonds, respectively. The thermal excitation of atoms at a temperature of 55 K is large enough for the hydrogen atoms occasionally to change their positions to form O4–H1... O1 and O4–H2... O2 bonds. At ambient pressures and higher temperatures the protons are in a dynamic exchange between the allowed positions of local minima. As a consequence, for nearly room-temperature conditions, the dynamic change between different structural configurations leads to the violation of all possible symmetry elements and with that to space group #E5/E5#1. The flipping of the protons between different sites is achieved by simple rotation of the OH-dipole and does not produce any significant distortion of the framework of topaz, whose symmetry remains that of the space group Pbnm. Therefore, no reduction of symmetry has been observed in former X-ray studies on topaz-OH. Calculated IR absorption spectra of topaz-OH were found to be in good agreement with measured spectra. According to the calculations, the two favourable configurations of protons might correspond to the measured peak splitting within the OH-stretching range. An experimentally observed low-frequency band at 3520 cm–1 was assigned to the OH-stretching of the O4–H3... O3 bond, while the band at 3600 cm–1 was attributed to OH-stretching of the O4–H4... O4 hydrogen bond. The broad peak in FAR-IR frequency range at 100–150 cm–1 is attributed to the stretching of H3... O3 and H4... O4 contacts. The rate of proton exchange at 670 K among different sites was estimated by ab-inito molecular dynamic simulations. The calculations predict that flipping of adjacent protons between O4–H3... O3 and O4–H4... O4 bonds at 670 K occur at a rate of about 1.96 THz. 相似文献
14.
15.
Stabilities of hexagonal new aluminous (NAL) phase and Ca-ferrite-type (CF) phase were investigated on the join NaAlSiO4-MgAl2O4 in a pressure range from 23 to 58 GPa at approximately constant temperature of 1,850 K, on the basis of in situ synchrotron
X-ray diffraction measurements in a laser-heated diamond-anvil cell. The results show that NAL is formed as a single phase
up to 34 GPa, NAL + CF between 34 and 43 GPa, and only CF at higher pressures in 40%NaAlSiO4-60%MgAl2O4 bulk composition. On the other hand, both NAL and CF coexist below 38 and 36 GPa, and only CF was obtained at higher pressures
in 60%NaAlSiO4-40%MgAl2O4 and 20%NaAlSiO4-80%MgAl2O4 composition, respectively. These results indicate that NAL appears only up to 46 GPa at 1,850 K, and CF forms continuous
solid solution at higher pressures on the join NaAlSiO4-MgAl2O4. NAL has limited stability in subducted mid-oceanic ridge basalt crust in the Earth’s lower mantle and undergoes a phase
transition to CF in deeper levels. 相似文献
16.
L. Z. Reznitsky E. V. Sklyarov T. Armbruster Z. F. Ushchapovskaya E. V. Galuskin Yu. S. Polekhovsky I. G. Barash 《Geology of Ore Deposits》2010,52(7):574-583
Oxyvanite has been identified as an accessory mineral in Cr-V-bearing quartz-diopside meta- morphic rocks of the Slyudyanka Complex in the southern Baikal region, Russia. The new mineral was named after constituents of its ideal formula (oxygen and vanadium). Quartz, Cr-V-bearing tremolite and micas, calcite, clinopyroxenes of the diopside-kosmochlor-natalyite series, Cr-bearing goldmanite, eskolaite-karelianite dravite-vanadiumdravite, V-bearing titanite, ilmenite, and rutile, berdesinskiite, schreyerite, plagioclase, scapolite, barite, zircon, and unnamed U-Ti-V-Cr phases are associated minerals. Oxyvanite occurs as anhedral grains up to 0.1–0.15 mm in size, without visible cleavage and parting. The new mineral is brittle, with conchoidal fracture. Observed by the naked eye, the mineral is black, with black streak and resinous luster. The microhardness (VHN) is 1064–1266 kg/mm2 (load 30 g), and the mean value is 1180 kg/mm2. The Mohs hardness is about 7.0–7.5. The calculated density is 4.66(2) g/cm3. The color of oxyvanite is pale cream in reflected light, without internal reflections. The measured reflectance in air is as follows (λ, nm-R, %): 440-17.8; 460-18; 480-18.2; 520-18.6; 520-18.6; 540-18.8; 560-18.9; 580-19; 600-19.1; 620-19.2; 640-19.3; 660-19.4; 680-19.5; 700-19.7. Oxyvanite is monoclinic, space group C2/c; the unit-cell dimensions are a = 10.03(2), b = 5.050(1), c = 7.000(1) Å, β = 111.14(1)°, V = 330.76(5)Å3, Z = 4. The strongest reflections in the X-ray powder pattern [d, Å, (I in 5-number scale)(hkl)] are 3.28 (5) (20\(\bar 2\)); 2.88 (5) (11\(\bar 2\)); 2.65, (5) (310); 2.44 (5) (112); 1.717 (5) (42\(\bar 2\)); 1.633 (5) (31\(\bar 4\)); 1.446 (4) (33\(\bar 2\)); 1.379 (5) (422). The chemical composition (electron microprobe, average of six point analyses, wt %): 14.04 TiO2, 73.13 V2O3 (53.97 V2O3calc, 21.25 VO2calc), 10.76 Cr2O3, 0.04 Fe2O3, 0.01 Al2O3, 0.02 MgO, total is 100.03. The empirical formula is (V 1.70 3+ Cr0.30)2.0(V 0.59 4+ Ti0.41)1.0O5. Oxyvanite is the end member of the oxyvanite-berdesinskiite series with homovalent isomorphic substitution of V4+ for Ti. The type material has been deposited at the Fersman Mineralogical Museum, Russian Academy of Sciences, Moscow. 相似文献
17.
18.
V. Nourozi Rad M. Anbia M. Hossaini Sadr 《International Journal of Environmental Science and Technology》2018,15(3):631-636
The Claus process has been used for the conversion of H2S and SO2 to elemental sulfur. These two sulfur compounds need special attention because they are very poisonous with negative impact on both the environment and human health. Here, highly active Fe–Ni/TiO2 catalyst has been prepared and shaped by three different binders (bentonite, polyethylene glycol and carboxymethyl cellulose) into extrudes. Comparing the mechanical strength and surface area of prepared extrudes, the optimal shaped catalyst was selected with 20% of bentonite, 2% of PEG and 2% of CMC. The optimal catalyst was characterized by X-ray powder diffraction, temperature-programmed reduction, Brunauer–Emmett–Teller specific surface area, Barrett–Joyner–Halenda, scanning electron microscopy and energy-dispersive X-ray techniques and used for sulfur recovery process. The performance of this product for sulfur recovery via Claus process was excellent with the conversion of hydrogen sulfide of 76.77% and sulfur dioxide of 97.83%. The catalyst also provides high hydrolysis activity of CS2 (83.06%). Therefore, a highly active TiO2-supported shaped catalyst with 85.62% of conversion efficiency has been prepared successfully to convert the small amounts of H2S, SO2 and CS2 to elemental sulfur. 相似文献
19.
The present analysis adjusts previous estimates of global ocean CaCO3 production rates substantially upward, to 133 × 1012 mol yr?1 plankton production and 42 × 1012 mol yr?1 shelf benthos production. The plankton adjustment is consistent with recent satellite-based estimates; the benthos adjustment includes primarily an upward adjustment of CaCO3 production on so-called carbonate-poor sedimentary shelves and secondarily pays greater attention to high CaCO3 mass (calcimass) and turnover of shelf communities on temperate and polar shelves. Estimated CaCO3 sediment accumulation rates remain about the same as they have been for some years: ~20 × 1012 mol yr?1 on shelves and 11 × 1012 mol yr?1 in the deep ocean. The differences between production and accumulation of calcareous materials call for dissolution of ~22 × 1012 mol yr?1 (~50 %) of shelf benthonic carbonate production and 122 × 1012 mol yr?1 (>90 %) of planktonic production. Most CaCO3 production, whether planktonic or benthonic, is assumed to take place in water depths of <100 m, while most dissolution is assumed to occur below this depth. The molar ratio of CO2 release to CaCO3 precipitation (CO2↑/CaCO3↓) is <1.0 and varies with depth. This ratio, Ψ, is presently about 0.66 in surface seawater and 0.85 in ocean waters deeper than about 1000 m. The net flux of CO2 associated with CaCO3 reactions in the global ocean in late preindustrial time is estimated to be an apparent influx from the atmosphere to the ocean, of +7 × 1012 mol C yr?1, at a time scale of 102–103 years. The CaCO3-mediated influx of CO2 is approximately offset by CO2 release from organic C oxidation in the water column. Continuing ocean acidification will have effects on CaCO3 and organic C metabolic responses to the oceanic inorganic C cycle, although those responses remain poorly quantified. 相似文献
20.
Akio Suzuki Eiji Ohtani Hidenori Terasaki Keisuke Nishida Hiromi Hayashi Tatsuya Sakamaki Yuki Shibazaki Takumi Kikegawa 《Physics and Chemistry of Minerals》2011,38(1):59-64
The viscosity of a silicate melt of composition NaAlSi2O6 was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere
viscometry using X-ray radiography. We found that the viscosity of the NaAlSi2O6 melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using
the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow
were calculated to be 3.7 ± 0.4 × 102 and 3.7 ± 0.5 × 102 kJ/mol at 2.2 and 2.9 GPa, respectively. 相似文献