首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 296 毫秒
1.
Abstract– Six chondritic clasts in the Cumberland Falls polymict breccia were examined: four texturally resemble ordinary chondrites (OCs) and two are impact melt breccias containing shocked OC clasts adjacent to a melt matrix. The six chondritic clasts are probably remnants of a single OC projectile that was heterogeneously shocked when it collided with the Cumberland Falls host. Mayo Belwa is the first known aubrite impact melt breccia. It contains coarse enstatite grains exhibiting mosaic extinction; the enstatite grains are surrounded by a melt matrix composed of 3–16 μm‐size euhedral and subhedral enstatite grains embedded in sodic plagioclase. Numerous vugs, ranging from a few micrometers to a few millimeters in size, constitute ～5 vol% of the meteorite. They occur nearly exclusively within the Mayo Belwa matrix; literature data show that some vugs are lined with bundles of acicular grains of the amphibole fluor‐richterite. This phase has been reported previously in only two other enstatite meteorites (Abee and St. Sauveur), both of which are EH‐chondrite impact melt breccias. It seems likely that in Mayo Belwa, volatiles were vaporized during an impact event and formed bubbles in the melt. As the melt solidified, the bubbles became cavities; plagioclase and fluor‐richterite crystallized at the margins of these cavities via reaction of the melt with the vapor.  相似文献   

2.
Abstract— Enstatite chondrites are classified into EH and EL groups, and some of them were melted once. In this paper, we report petrography and mineral chemistry of five new Antarctic enstatite chondrites. Yamato 793225 is characterized by intermediate properties between the EH and EL groups and probably represents a new grouplet of enstatite chondrites. The three paired meteorites (Y-8404, Y-8414 and Y-86004) may have cooled rapidly near the surface of the parent body as impact EH melt rocks. Yamato 82189 is also classified as EH melt rock, but it experienced slow cooling as did Y-793225. Yamato 82189 contains the first occurrence of phlogopite in enstatite meteorites.  相似文献   

3.
Abstract— Galim is a polymict breccia consisting of a heavily shocked (shock stage S6) LL6 chondrite, Galim (a), and an impact-melted EH chondrite, Galim (b). Relict chondrules in Galim (b) served as nucleation sites for euhedral enstatite grains crystallizing from the impact melt. Many of the reduced phases typical of EH chondrites (e.g., Si-bearing metallic Fe-Ni; Ti-bearing troilite) are absent. Galim (b) was probably shock-melted while in contact with a more oxidized source, namely, Galim (a); during this event, Si was oxidized from the metal and Ti was oxidized from troilite. Galim (a) contains shock veins and recrystallized, unzoned olivine. The absence of evidence for reduction in Galim (a) may indicate that the amount of LL material greatly exceeded that of EH material; shock metamorphism may have taken place on the LL parent body. Shock-induced redox reactions such as those inferred for the Galim breccia appear to be restricted mainly to asteroids because the low-end tail of their relative-velocity distribution permits mixing of intact disparate materials (including accretion of projectiles of different oxidation states), whereas the peak of the distribution leads to high equilibration shock pressures (allowing impact-induced exchange between previously accreted, disequilibrated materials). Galim probably formed by a two-stage process: (1) accretion to the LL parent body of an intact EH projectile at low relative velocities, and (2) shock metamorphism of the assemblage by the subsequent impact of another projectile at significantly higher relative velocities.  相似文献   

4.
The Adams County, Colorado, H5 chondrite contains a lithic fragment, 1 cm in size, that is texturally and mineralogically quite different from the chondritic host. It is composed of: a groundmass of fine-grained euhedral to subhedral olivine (3–15 μm) and interstitial glass enclosing larger olivine and pyroxene grains (0.15-0.5 mm; about 15 vol %); an assemblage of enstatite grains (subfragment within) and an assemblage of olivine plus orthopyroxene (a second subfragment); and about 11 vol % grains of mixed troilite and nickel-iron metal. Analyses yielded these results: (i) olivine grains of the fragment groundmass have a compositional range (Fa12–45) and most grains contain substantial CaO and Cr2O3 (～ 0.20 and 0.30 avg. wt%, respectively); interstitial glass has ～ 55 wt% SiO2; (ii) larger olivine grains of the fragment are similarly high in CaO and Cr2O3 and also have a wide FeO/MgO range; one unusual pyroxene is an Mg-rich pigeonite; (iii) the metal is martensite in composition (11–14 wt% Ni); and (iv) major and trace element analyses by INAA indicate an H-group bulk composition for the entire 1 cm lithic fragment. On the basis of its texture and bulk and mineral compositions, the fragment is interpreted to represent unequilibrated H-group material that was partly melted by impact. The Ca- and Cr-enriched groundmass olivine and interstitial glass resulted from rapid crystallization of the chondritic melt. The Ca- and Cr-enriched larger silicate grains, including the enstatite sub-fragment and the pigeonite grain, are residual, unmelted clasts from the target material (this is supported by the presence of similar material in actual H3 chondrites). Further impact brecciation of the clast-laden melt material, and resultant impact-splashing accounts for the presence of the fragment in the H-group Adams County host and documents the coexistence of unequilibrated and equilibrated H-group material as surface regolith on one parent body.  相似文献   

5.
Abstract— Two groups of chondrules in the Murchison CM chondrite, which have previously been identified on the basis of FeO in the chondrule grains, are readily identified from cathodoluminescence (CL) and belong to those of the ordinary chondrite group A and B chondrules of Sears et al. (1992a). All chondrules are surrounded by fine-grained rims containing forsterite with bright red CL, but on group A chondrules an outer thin rim grades into a much thicker rim, with a lower density of forsterite grains, which in turn grades into the central chondrule. Group B chondrules have only the thin outer rim with a high density of small forsterite grains. This is the first time an unequivocal correlation has been observed between chondrule rim thickness and the composition of the object on which the rim is located. We suggest that while all objects in the meteorite (group B chondrules, refractory inclusions, mineral and chondrule fragments, clasts) acquired a very thin rim during processing in a wet regolith, the thick rims on group A chondrules were formed by aqueous alteration of precursor metal- and sulfide-rich rims which are a characteristic of group A chondrules in ordinary chondrites.  相似文献   

6.
Abstract— Zag and Monahans (1998) are H‐chondrite regolith breccias comprised mainly of light‐colored metamorphosed clasts, dark clasts that exhibit extensive silicate darkening, and a halite‐bearing clastic matrix. These meteorites reflect a complex set of modification processes that occurred on the H‐chondrite parent body. The light‐colored clasts are thermally metamorphosed H5 and H6 rocks that were fragmented and deposited in the regolith. The dark clasts formed from light‐colored clasts during shock events that melted and mobilized a significant fraction of their metallic Fe‐Ni and troilite grains. The clastic matrices of these meteorites are rich in solar‐wind gases. Parent‐body water was required to cause leaching of chondritic minerals and chondrule glass; the fluids became enriched in Na, K, Cl, Br, Al, Ca, Mg and Fe. Evaporation of the fluids caused them to become brines as halides and alkalies became supersaturated; grains of halite (and, in the case of Monahans (1998), halite with sylvite inclusions) precipitated at low temperatures (≤100 °C) in the porous regolith. In both meteorites fluid inclusions were trapped inside the halite crystals. Primary fluid inclusions were trapped in the growing crystals; secondary inclusions formed subsequently from fluid trapped within healed fractures.  相似文献   

7.
Abstract— The enstatite chondrite reckling peak (rkp) a80259 contains feldspathic glass, kamacite, troilite, and unusual sets of parallel fine‐grained enstatite prisms that formed by rapid cooling of shock melts. Metallic Fe,Ni and troilite occur as spherical inclusions in feldspathic glass, reflecting the immiscible Fe‐Ni‐S and feldspathic melts generated during the impact. The Fe‐Ni‐S and feldspathic liquids were injected into fractures in coarse‐grained enstatite and cooled rapidly, resulting in thin (≤ 10 μm) semicontinuous to discontinuous veins and inclusion trails in host enstatite. Whole‐rock melt veins characteristic of heavily shocked ordinary chondrites are conspicuously absent. Raman spectroscopy shows that the feldspathic material is a glass. Elevated MgO and SiO2 contents of the glass indicate that some enstatite and silica were incorporated in the feldspathic melt. Metallic Fe,Ni globules are enclosed by sulfide and exhibit Nienrichment along their margins characteristic of rapid crystallization from a Fe‐Ni‐S liquid. Metal enclosed by sulfide is higher in Si and P than metal in feldspathic glass and enstatite, possibly indicating lower O fugacities in metal/sulfide than in silicate domains. Fine‐grained, elongate enstatite prisms in troilite or feldspathic glass crystallized from local pyroxene melts that formed along precursor grain boundaries, but most of the enstatite in the target rock remained solid during the impact and occurs as deformed, coarsegrained crystals with lower CaO, Al2O3, and FeO than the fine‐grained enstatite. Reckling Peak A80259 represents an intermediate stage of shock melting between unmelted E chondrites and whole‐rock shock melts and melt breccias documented by previous workers. The shock petrogenesis of RKPA80259 reflects the extensive impact processing of the enstatite chondrite parent bodies relative to those of other chondrite types.  相似文献   

8.
Abstract— Lunar meteorite QUE 93069 found in Antarctica is a mature, anorthitic regolith breccia with highland affinities that was ejected from the Moon <0.3 Ma ago. The frequency distribution of mineral and lithic clasts gives information about the nature of the regolith and subregolith basement near the ejection site as well as about the abundances of rock types shocked to different degrees prior to the breccia formation. Thin section QUE 93069,37 consists of 67.5 vol% fine-grained (<～130 μm) constituents and 32.5 vol% mineral and lithic clasts and an impact melt vein. The most abundant types of these clasts are intragranularly recrystallized anorthosites and plagioclases (together 26.3 vol%) and feldspathic fine-grained to microporphyritic crystalline melt breccias (21.9 vol%). Mafic crystalline melt breccias are extremely rare (1.3 vol%). Granulitic lithologies are 10.4 vol%, recrystallized feldspathic melt breccias are 15.0 vol%, and glasses are 3.5 vol%. The impact melt vein cutting across the entire thin section was probably formed subsequent to the lithification process of the bulk rock at pressures below 20 GPa, because the bulk rock never experienced a higher peak shock pressure. Lunar meteorite QUE 93069 has a higher abundance of clear glass, occurring within melt spherules, glassy fragments, and an impact melt vein than lunar meteorites ALHA81005, Y-791197, Y-82192/3, Y-86032, or MAC 88104/5. The high abundance of melt spherules indicates that this lunar meteorite contains the highest content of typical regolith components. Mafic crystalline melt breccias are much rarer in QUE 93069 than in all other lunar highland regolith breccias. The extremely low abundance of mafic components may constrain possible areas of the Moon, from which the breccia was derived. The source area of QUE 93069 must be a highland terrain lacking significant mafic impact melts or mare components.  相似文献   

9.
Abstract— NWA 2526 is a coarse‐grained, achondritic rock dominated by equigranular grains of polysynthetically twinned enstatite (?85 vol%) with frequent 120° triple junctions and ?10–15 vol% of kamacite + terrestrial weathering products. All other phases including troilite, daubreelite, schreibersite, and silica‐normative melt areas make up 相似文献   

10.
Abstract— –Literature data show that, among EH chondrites, the Abee impact‐melt breccia exhibits unusual mineralogical characteristics. These include very low MnO in enstatite (<0.04 wt%), higher Mn in troilite (0.24 wt%) and oldhamite (0.36 wt%) than in EH4 Indarch and EH3 Kota‐Kota (which are not impact‐melt breccias), low Mn in keilite (3.6–4.3 wt%), high modal abundances of keilite (11.2 wt%) and silica (～7 wt%, but ranging up to 16 wt% in some regions), low modal abundances of total silicates (58.8 wt%) and troilite (5.8 wt%), and the presence of acicular grains of the amphibole, fluor‐richterite. These features result from Abee's complex history of shock melting and crystallization. Impact heating was responsible for the loss of MnO from enstatite and the concomitant sulfidation of Mn. Troilite and oldhamite grains that crystallized from the impact melt acquired relatively high Mn contents. Abundant keilite and silica also crystallized from the melt; these phases (along with metallic Fe) were produced at the expense of enstatite, niningerite and troilite. Melting of the latter two phases produced a S‐rich liquid with higher Fe/Mg and Fe/Mn ratios than in the original niningerite, allowing the crystallization of keilite. Prior to impact melting, F was distributed throughout Abee, perhaps in part adsorbed onto grain surfaces; after impact melting, most of the F that was not volatilized was incorporated into crystallizing grains of fluor‐richterite. Other EH‐chondrite impact‐melt breccias and impact‐melt rocks exhibit some of these mineralogical features and must have experienced broadly similar thermal histories.  相似文献   

11.
Abstract— To test whether aubrites can be formed by melting of enstatite chondrites and to understand igneous processes at very low O fugacities, we have conducted partial melting experiments on the Indarch (EH4) chondrite at 1000–1500 °C. Silicate melting begins at 1000 °C, and Indarch is completely melted by 1500 °C. The metal-sulfide component melts completely at 1000 °C. Substantial melt migration occurs at 1300–1400 °C, and metal migrates out of the silicate charge at 1450 °C and ～50% silicate partial melting. As a group, our experiments contain three immiscible metallic melts (Si-, P-, and C-rich), two immiscible sulfide melts (Fe- and FeMgMnCa-rich), and silicate melt. Our partial melting experiments on the Indarch (EH4) enstatite chondrite suggest that igneous processes at low fO2 exhibit several unique features. The complete melting of sulfides at 1000 °C suggests that aubritic sulfides are not relics. Aubritic oldhamite may have crystallized from Ca and S complexed in the silicate melt. Significant metal-sulfide melt migration might occur at relatively low degrees of silicate partial melting. Substantial elemental exchange occurred between different melts (e.g., S between sulfide and silicate, Si between silicate and metal), a feature not observed during experiments at higher fO2. This exchange may help explain the formation of aubrites from known enstatite chondrites.  相似文献   

12.
Abstract— Enstatite meteorites are highly reduced rocks that consist of major, nearly FeO-free enstatite, variable amounts of metallic Fe, Ni and troilite, and a host of rare minerals formed under highly-reducing conditions. They are comprised of the EH and EL chondrites and the aubrites. Here I discuss some of their properties and the nature and number of their parent bodies. Conclusions: 1. EH and EL chondrites show bulk compositional differences in non-volatile major elements that were established by nebular, not planetary processes. Occurrence of abundant breccias among them but lack of clasts of EL in EH chondrites (and vice versa) suggests that EH and EL chondrites represent two separate parent bodies. 2. Aubrites were not derived from known enstatite chondrites on the same parent bodies. Aubrites represent samples from a third enstatite meteorite parent body. 3. The aubrite parent body may have experienced collisional break-up and gravitational reassembly of the debris into a rubble-pile object. 4. The aubrite source material (parent body) was probably enstatite chondrite-like in composition, but had a higher troilite/metallic Fe, Ni ratio, higher contents of titanium and diopside, and possibly less plagioclase than known enstatite chondrites. 5. Shallowater, the only non-brecciated aubrite, does not appear to have formed on the EH, EL, or aubrite parent bodies by either internal (igneous) or external (impact) melting processes. Instead, Shallowater may be a sample from yet a fourth enstatite meteorite parent body. 6. Shallowater experienced a complex three-stage cooling history, requiring an equally complex mode of origin: collisional break-up of a molten or partly molten body by impact with a solid body, followed by gravitational reassembly. 7. It is unknown why some enstatite meteorite parent bodies melted (the aubrite and Shallowater bodies), and others did not (the EH and EL bodies). If unipolar dynamo induction by a primordial T Tauri sun was the dominant heat source that heated asteroidal-sized bodies in the early Solar System, then the aubrite and Shallowater parent bodies may have melted because they were of intermediate sizes, whereas the EH and EL bodies did not melt because they were either much smaller or much larger.  相似文献   

13.
Zak?odzie is an enstatite meteorite of unknown petrogenesis. Chemically, it resembles enstatite chondrites, but displays an achondrite‐like texture. Here we report on fabric and texture analyses of Zak?odzie utilizing X‐ray computed tomography and scanning electron microscopy and combine it with a nanostructural study of striated pyroxene by transmission electron microscopy. With this approach we identify mechanisms that led to formation of the texture and address the petrogenesis of the rock. Zak?odzie experienced a shock event in its early evolution while located at some depth inside a warm parent body. Shock‐related strain inverted pyroxene to the observed mixture of intercalated orthorhombic and monoclinic polymorphs. The heat that dissipated after the peak shock was added to primary, radiogenic‐derived heat and led to a prolonged thermal event. This caused local, equilibrium‐based partial melting of plagioclase and metal‐sulfide. Partial melting was followed by two‐stage cooling. The first phase of annealing (above 500 °C) allowed for crystallization of plagioclase and for textural equilibration of metal and sulfides with silicates. Below 500 °C, cooling was faster and more heterogeneous at cm scale, allowing retention of keilite and quenching of K‐rich feldspathic glass in some parts. Our study indicates that Zak?odzie is neither an impact melt rock nor a primitive achondrite, as suggested in former studies. An impact melt origin is excluded because enstatite in Zak?odzie was never completely melted and partial melting occurred during equilibrium‐based postshock conditions. Texturally, the rock represents a transition of chondrite and achondrite and was formed when early impact heat was added to internal radiogenic heat.  相似文献   

14.
Abstract— A large hand sample and numerous polished thin sections, made from the hand sample, of the Kapoeta howardite and its many diverse lithic clasts were studied in detail by optical microscopy and electron microprobe techniques in an attempt to understand the surface processes that operated on the howardite-eucrite-diogenite (HED) parent body (most likely the asteroid 4 Vesta). Four unique, unusually large clasts, designated A (mafic breccia), B (granoblastic eucrite), D (howardite) and H (melt-coated breccia), were selected for detailed study (modal analysis, mineral microprobe analysis, and noble gas measurements). Petrographic studies reveal that Kapoeta consists of a fine-grained matrix made mostly of minute pyroxene and plagioclase fragments, into which are embedded numerous different lithic and mineral clasts of highly variable sizes. The lithic clasts include pyroxene-plagioclase (eucrite), orthopyroxenite (diogenite), howardite, impact-melt, metal-sulfide-rich, and carbonaceous chondrite clasts. The howardite clasts include examples of lithic clasts that constitute breccias-within-breccias, suggesting that at least two regolith generations are represented in the Kapoeta sample we studied. The clast assemblage suggests that repeated shock lithification was an important process during regolith evolution. Noble gas analyses of clast samples fall into two populations: (a) solar-gas-rich clasts H (rim only) and D and (b) clasts A and B, which are essentially free of solar gases. The concentrations of solar noble gases in the two matrix samples differ by a factor of ～40. It appears that clast D is a true regolith breccia within the Kapoeta howardite (breccia-within-breccia), while clast H is a regolith breccia that has been significantly impact reworked. Our data indicate that the Kapoeta howardite is an extraordinarily heterogeneous rock in modal mineral and lithic clast abundances, grain size distributions, solar-wind noble gas concentrations and cosmic-ray exposure ages. These results illustrate the repetitive nature of impact comminution and lithification in the regolith of the HED parent body.  相似文献   

15.
A detailed mineralogical and chemical study of Almahata Sitta fine‐grained ureilites (MS‐20, MS‐165, MS‐168) was performed to shed light on the origin of these lithologies and their sulfide and metal. The Almahata Sitta fine‐grained ureilites (silicates <30 μm grain size) show textural and chemical evidence for severe impact smelting as described for other fine‐grained ureilites. Highly reduced areas in Almahata Sitta fine‐grained ureilites show large (up to ～1 mm) Si‐bearing metal grains (up to ～4.5 wt% Si) and niningerite [Mg>0.5,(Mn,Fe)<0.5S] with some similarities to the mineralogy of enstatite (E) chondrites. Overall, metal grains show a large compositional variability in Ni and Si concentrations. Niningerite grains probably formed as a by‐product of smelting via sulfidation. The large Si‐Ni variation in fine‐grained ureilite metal could be the result of variable degrees of reduction during impact smelting, inherited from coarse‐grained ureilite precursors, or a combination of both. Large Si‐bearing metal grains probably formed via coalescence of existing and newly formed metal during impact smelting. Bulk and in situ siderophile trace element abundances indicate three distinct populations of (1) metal crystallized from partial melts in MS‐20, (2) metal resembling bulk chondritic compositions in MS‐165, and (3) residual metal in MS‐168. Almahata Sitta fine‐grained ureilites developed their distinctive mineralogy due to severe reduction during smelting. Despite the presence of E chondrite and ureilite stones in the Almahata Sitta fall, a mixing relation of E chondrites or their constituents and ureilite material in Almahata Sitta can be ruled out based on isotopic, textural, and mineral‐chemical reasons.  相似文献   

16.
Abstract— In Qingzhen (EH3), oldhamite contains numerous types of inclusions and intergrows with other phases; but in equilibrated enstatite chondrites and aubrites, it usually occurs as individual grains. I suggest that oldhamite in unequilibrated enstatite chondrites (UECs) crystallized from a melt, probably during chondrule formation. Subsequent thermal metamorphism on the parent bodies further modified the oldhamite occurrences in enstatite chondrites. This suggestion is consistent with the results of melting experiments on UECs and aubrites and with the volatile element enrichments in this mineral. I analyzed minor and trace element abundances in diopside from two aubrites. These data and petrographic observations suggest that diopside formed by igneous crystallization. I report the first known occurrence of roedderite in an aubrite and its major, minor, and trace element concentrations. This mineral is rich in alkalis but is depleted in siderophile and refractory lithophile elements. A negative Sm anomaly was noted in albite from equilibrated enstatite chondrites and aubrites.  相似文献   

17.
The EH and EL enstatite chondrites are the most reduced chondrite groups, having formed in nebular regions where the gas may have had high C/O and/or pH2/pH2O ratios. Enstatite chondrites (particularly EH) have higher CI- and Mg-normalized abundances of halogens (especially F and Cl) and nitrogen than ordinary chondrites and most groups of carbonaceous chondrites. Even relative to CI chondrites, EH and EL chondrites are enriched in F. We have found that literature values for the halogen abundance ratios in EH and EL chondrites are strongly correlated with the electronegativities of the individual halogens. We suggest that the most reactive halogens were the most efficient at forming compounds (e.g., halides) that were incorporated into EH-chondrite precursor materials. It seems plausible that, under the more-oxidizing conditions pertaining to the other chondrite groups, a larger fraction of the halogens remained in the gas. Nitrogen may have been incorporated into the enstatite chondrites as simple nitrides that did not condense under the more-oxidizing conditions in the regions where other chondrite groups formed. Literature data show that unequilibrated enstatite chondrites have light bulk N (δ 15N ≈ −20‰) compared to most ordinary (−5 to +20‰) and carbonaceous (+20 to +190‰) chondrites; this may reflect the contribution in enstatite chondrites of nitride condensates with δ15 N values close to the proposed nebular mean (~−400‰). In contrast, N in carbonaceous chondrites is mainly contained within 15N-rich organic matter. The major carrier of N in ordinary chondrites is unknown.  相似文献   

18.
Abstract— The Vredefort Granophyre represents impact melt that was injected downward into fractures in the floor of the Vredefort impact structure, South Africa. This unit contains inclusions of country rock that were derived from different locations within the impact structure and are predominantly composed of quartzite, feldspathic quartzite, arkose, and granitic material with minor proportions of shale and epidiorite. Two of the least recrystallized inclusions contain quartz with single or multiple sets of planar deformation features. Quartz grains in other inclusions display a vermicular texture, which is reminiscent of checkerboard feldspar. Feldspars range from large, twinned crystals in some inclusions to fine‐grained aggregates that apparently are the product of decomposition of larger primary crystals. In rare inclusions, a mafic mineral, probably biotite or amphibole, has been transformed to very fine‐grained aggregates of secondary phases that include small euhedral crystals of Fe‐rich spinel. These data indicate that inclusions within the Vredefort Granophyre were exposed to shock pressures ranging from <5 to 8–30 GPa. Many of these inclusions contain small, rounded melt pockets composed of a groundmass of devitrified or metamorphosed glass containing microlites of a variety of minerals, including K‐feldspar, quartz, augite, low‐Ca pyroxene, and magnetite. The composition of this devitrified glass varies from inclusion to inclusion, but is generally consistent with a mixture of quartz and feldspar with minor proportions of mafic minerals. In the case of granitoid inclusions, melt pockets commonly occur at the boundaries between feldspar and quartz grains. In metasedimentary inclusions, some of these melt pockets contain remnants of partially melted feldspar grains. These melt pockets may have formed by eutectic melting caused by inclusion of these fragments in the hot (650 to 1610 °C) impact melt that crystallized to form the Vredefort Granophyre.  相似文献   

19.
Atlanta is the fifth known brecciated enstatite chondrite. It contains a centimeter-sized troilite-rich clast, similar to those that occur in Blithfield. All of these clasts probably formed in the solar nebula under high pS2/pO2 conditions in a gas of non-cosmic composition. The absence of ordinary or carbonaceous chondrite clasts in any of the enstatite chondrite breccias and absence of enstatite chondrite clasts or materials formed at high pS2/pO2 ratios in ordinary and carbonaceous chondrite breccias support the model that enstatite chondrites were formed at a location distant from those of the other chondritic groups.  相似文献   

20.
Queen Alexandra Range (QUE) meteorite 94204 is an anomalous enstatite meteorite whose petrogenesis has been ascribed to either partial melting or impact melting. We studied the meteorite pairs QUE 94204, 97289/97348, 99059/99122/99157/99158/99387, and Yamato (Y)‐793225; these were previously suggested to represent a new grouplet. We present new data for mineral abundances, mineral chemistries, and siderophile trace element compositions (of Fe,Ni metal) in these meteorites. We find that the texture and composition of Y‐793225 are related to EL6, and that this meteorite is unrelated to the QUEs. The mineralogy and siderophile element compositions of the QUEs are consistent with petrogenesis from an enstatite chondrite precursor. We caution that potential re‐equilibration during melting and recrystallization of enstatite chondrite melt‐rocks make it unreliable to use mineral chemistries to assign a specific parent body affinity (i.e., EH or EL). The QUEs have similar mineral chemistries among themselves, while slight variations in texture and modal abundances exist between them. They are dominated by inclusion‐bearing millimeter‐sized enstatite (average En99.1–99.5) with interstitial spaces filled predominantly by oligoclase feldspar (sometimes zoned), kamacite (Si approximately 2.4 wt%), troilite (≤2.4 wt% Ti), and cristobalite. Siderophile elements that partition compatibly between solid metal and liquid metal are not enriched like in partial melt residues Itqiy and Northwest Africa (NWA) 2526. We find that the modal compositions of the QUEs are broadly unfractionated with respect to enstatite chondrites. We conclude that a petrogenesis by impact melting, not partial melting, is most consistent with our observations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号