共查询到20条相似文献，搜索用时 15 毫秒
1.
Joint inversion of Rayleigh‐wave dispersion data and vertical electric sounding data: synthetic tests on characteristic sub‐surface models 
下载免费PDF全文
下载免费PDF全文 In the traditional inversion of the Rayleigh dispersion curve, layer thickness, which is the second most sensitive parameter of modelling the Rayleigh dispersion curve, is usually assumed as correct and is used as fixed a priori information. Because the knowledge of the layer thickness is typically not precise, the use of such a priori information may result in the traditional Rayleigh dispersion curve inversions getting trapped in some local minima and may show results that are far from the real solution. In this study, we try to avoid this issue by using a joint inversion of the Rayleigh dispersion curve data with vertical electric sounding data, where we use the common‐layer thickness to couple the two methods. The key idea of the proposed joint inversion scheme is to combine methods in one joint Jacobian matrix and to invert for layer S‐wave velocity, resistivity, and layer thickness as an additional parameter, in contrast with a traditional Rayleigh dispersion curve inversion. The proposed joint inversion approach is tested with noise‐free and Gaussian noise data on six characteristic, synthetic sub‐surface models: a model with a typical dispersion; a low‐velocity, half‐space model; a model with particularly stiff and soft layers, respectively; and a model reproduced from the stiff and soft layers for different layer‐resistivity propagation. In the joint inversion process, the non‐linear damped least squares method is used together with the singular value decomposition approach to find a proper damping value for each iteration. The proposed joint inversion scheme tests many damping values, and it chooses the one that best approximates the observed data in the current iteration. The quality of the joint inversion is checked with the relative distance measure. In addition, a sensitivity analysis is performed for the typical dispersive sub‐surface model to illustrate the benefits of the proposed joint scheme. The results of synthetic models revealed that the combination of the Rayleigh dispersion curve and vertical electric sounding methods in a joint scheme allows to provide reliable sub‐surface models even in complex and challenging situations and without using any a priori information. 相似文献
2.
Common‐midpoint moveout of converted waves is generally asymmetric with respect to zero offset and cannot be described by the traveltime series t2(x2) conventionally used for pure modes. Here, we present concise parametric expressions for both common‐midpoint (CMP) and common‐conversion‐point (CCP) gathers of PS‐waves for arbitrary anisotropic, horizontally layered media above a plane dipping reflector. This analytic representation can be used to model 3D (multi‐azimuth) CMP gathers without time‐consuming two‐point ray tracing and to compute attributes of PS moveout such as the slope of the traveltime surface at zero offset and the coordinates of the moveout minimum. In addition to providing an efficient tool for forward modelling, our formalism helps to carry out joint inversion of P and PS data for transverse isotropy with a vertical symmetry axis (VTI media). If the medium above the reflector is laterally homogeneous, P‐wave reflection moveout cannot constrain the depth scale of the model needed for depth migration. Extending our previous results for a single VTI layer, we show that the interval vertical velocities of the P‐ and S‐waves (VP0 and VS0) and the Thomsen parameters ε and δ can be found from surface data alone by combining P‐wave moveout with the traveltimes of the converted PS(PSV)‐wave. If the data are acquired only on the dip line (i.e. in 2D), stable parameter estimation requires including the moveout of P‐ and PS‐waves from both a horizontal and a dipping interface. At the first stage of the velocity‐analysis procedure, we build an initial anisotropic model by applying a layer‐stripping algorithm to CMP moveout of P‐ and PS‐waves. To overcome the distorting influence of conversion‐point dispersal on CMP gathers, the interval VTI parameters are refined by collecting the PS data into CCP gathers and repeating the inversion. For 3D surveys with a sufficiently wide range of source–receiver azimuths, it is possible to estimate all four relevant parameters (VP0, VS0, ε and δ) using reflections from a single mildly dipping interface. In this case, the P‐wave NMO ellipse determined by 3D (azimuthal) velocity analysis is combined with azimuthally dependent traveltimes of the PS‐wave. On the whole, the joint inversion of P and PS data yields a VTI model suitable for depth migration of P‐waves, as well as processing (e.g. transformation to zero offset) of converted waves. 相似文献
3.
4.
Angus I. Best Lucy M. MacGregor Jeremy Sothcott Tim A. Minshull 《Geophysical Prospecting》2011,59(4):777-786
Improvements in the joint inversion of seismic and marine controlled source electromagnetic data sets will require better constrained models of the joint elastic‐electrical properties of reservoir rocks. Various effective medium models were compared to a novel laboratory data set of elastic velocity and electrical resistivity (obtained on 67 reservoir sandstone samples saturated with 35 g/l brine at a differential pressure of 8 MPa) with mixed results. Hence, we developed a new three‐phase effective medium model for sandstones with pore‐filling clay minerals based on the combined self‐consistent approximation and differential effective medium model. We found that using a critical porosity of 0.5 and an aspect ratio of 1 for all three components, the proposed model gave accurate model predictions of the observed magnitudes of P‐wave velocity and electrical resistivity and of the divergent trends of clean and clay‐rich sandstones at higher porosities. Using only a few well‐constrained input parameters, the new model offers a practical way to predict in situ porosity and clay content in brine saturated sandstones from co‐located P‐wave velocity and electrical resistivity data sets. 相似文献
5.
6.
A major complication caused by anisotropy in velocity analysis and imaging is the uncertainty in estimating the vertical velocity and depth scale of the model from surface data. For laterally homogeneous VTI (transversely isotropic with a vertical symmetry axis) media above the target reflector, P‐wave moveout has to be combined with other information (e.g. borehole data or converted waves) to build velocity models for depth imaging. The presence of lateral heterogeneity in the overburden creates the dependence of P‐wave reflection data on all three relevant parameters (the vertical velocity VP0 and the Thomsen coefficients ε and δ) and, therefore, may help to determine the depth scale of the velocity field. Here, we propose a tomographic algorithm designed to invert NMO ellipses (obtained from azimuthally varying stacking velocities) and zero‐offset traveltimes of P‐waves for the parameters of homogeneous VTI layers separated by either plane dipping or curved interfaces. For plane non‐intersecting layer boundaries, the interval parameters cannot be recovered from P‐wave moveout in a unique way. Nonetheless, if the reflectors have sufficiently different azimuths, a priori knowledge of any single interval parameter makes it possible to reconstruct the whole model in depth. For example, the parameter estimation becomes unique if the subsurface layer is known to be isotropic. In the case of 2D inversion on the dip line of co‐orientated reflectors, it is necessary to specify one parameter (e.g. the vertical velocity) per layer. Despite the higher complexity of models with curved interfaces, the increased angle coverage of reflected rays helps to resolve the trade‐offs between the medium parameters. Singular value decomposition (SVD) shows that in the presence of sufficient interface curvature all parameters needed for anisotropic depth processing can be obtained solely from conventional‐spread P‐wave moveout. By performing tests on noise‐contaminated data we demonstrate that the tomographic inversion procedure reconstructs both the interfaces and the VTI parameters with high accuracy. Both SVD analysis and moveout inversion are implemented using an efficient modelling technique based on the theory of NMO‐velocity surfaces generalized for wave propagation through curved interfaces. 相似文献
7.
An inverse problem is one in which the parameters of a model are determined from measured seismic data. Important to the solution of inverse problems is the issue of whether or not a solution exists. In this paper we show, in a constructive manner, that a solution does exist to the specific inverse problem of determining the parameters of a horizontally stratified, lossless, isotropic and homogeneous layered system that is excited by a non-normal incidence (NNI) plane wave. Mode conversion between P- and S-waves is included. We develop a seven-step layer-recursive procedure for determining all of the parameters for layer j. These parameters are P-wave and S-wave velocities and angles of incidence, density, thickness, traveltimes, and reflection- and transmission-coefficient matrices. Downward continuation of data from the top of one layer to the top of the next lower layer is an important step in our procedure, just as it is in normal incidence (NI) inversion. We show that, in order to compute all parameters of layer j, we need to (and can) compute some parameters for layer j+ 1. This is a non-causal phenomenon that seems to be necessary in NNI inversion but is not present in NI inversion. 相似文献
8.
In areas of complex geology such as the Canadian Foothills, the effects of anisotropy are apparent in seismic data and estimation of anisotropic parameters for use in seismic imaging is not a trivial task. Here we explore the applicability of common‐focus point (CFP)‐based velocity analysis to estimate anisotropic parameters for the variably tilted shale thrust sheet in the Canadian Foothills model. To avoid the inherent velocity‐depth ambiguity, we assume that the elastic properties of thrust‐sheet with respect to transverse isotropy symmetry axis are homogeneous, the reflector below the thrust‐sheet is flat, and that the anisotropy is weak. In our CFP approach to velocity analysis, for a poorly imaged reflection point, a traveltime residual is obtained as the time difference between the focusing operator for an assumed subsurface velocity model and the corresponding CFP response obtained from the reflection data. We assume that this residual is due to unknown values for anisotropy, and we perform an iterative linear inversion to obtain new model parameters that minimize the residuals. Migration of the data using parameters obtained from our inversion results in a correctly positioned and better focused reflector below the thrust sheet. For traveltime computation we use a brute force mapping scheme that takes into account weakly tilted transverse isotropy media. For inversion, the problem is set up as a generalized Newton's equation where traveltime error (differential time shift) is linearly dependent on the parameter updates. The iterative updates of parameters are obtained by a least‐squares solution of Newton's equations. The significance of this work lies in its applicability to areas where transverse isotropy layers are heterogeneous laterally, and where transverse isotropy layers are overlain by complex structures that preclude a moveout curve fitting. 相似文献
9.
Joint PP‐ and PSV‐wave amplitudes versus offset and azimuth inversion for fracture compliances in horizontal transversely isotropic media 下载免费PDF全文
下载免费PDF全文 We propose a robust approach for the joint inversion of PP‐ and PSV‐wave angle gathers along different azimuths for the elastic properties of the homogeneous isotropic host rock and excess compliances due to the presence of fractures. Motivated by the expression of fluid content indicator in fractured reservoirs and the sensitivity of Lamé impedances to fluid type, we derive PP‐ and PSV‐wave reflection coefficients in terms of Lamé impedances, density, and fracture compliances for an interface separating two horizontal transversely isotropic media. Following a Bayesian framework, we construct an objective function that includes initial models. We employ the iteratively reweighted least‐squares algorithm to solve the inversion problem to estimate unknown parameters (i.e., Lamé impedances, density, and fracture compliances) from PP‐ and PSV‐wave angle gathers along different azimuths. Synthetic tests reveal that the unknown parameters estimated using the joint inversion approach match true values better than those estimated using a PP‐wave amplitude inversion only. A real data test indicates that reasonable results for subsurface fracture detection are obtained from the joint inversion approach. 相似文献
10.
Filters for migrated offset substacks are designed by partial coherence analysis to predict ‘normal’ amplitude variation with offset (AVO) in an anomaly free area. The same prediction filters generate localized prediction errors when applied in an AVO‐anomalous interval. These prediction errors are quantitatively related to the AVO gradient anomalies in a background that is related to the minimum AVO anomaly detectable from the data. The prediction‐error section is thus used to define a reliability threshold for the identification of AVO anomalies. Coherence analysis also enables quality control of AVO analysis and inversion. For example, predictions that are non‐localized and/or do not show structural conformity may indicate spatial variations in amplitude–offset scaling, seismic wavelet or signal‐to‐noise (S/N) ratio content. Scaling and waveform variations can be identified from inspection of the prediction filters and their frequency responses. S/N ratios can be estimated via multiple coherence analysis. AVO inversion of seismic data is unstable if not constrained. However, the use of a constraint on the estimated parameters has the undesirable effect of introducing biases into the inverted results: an additional bias‐correction step is then needed to retrieve unbiased results. An alternative form of AVO inversion that avoids additional corrections is proposed. This inversion is also fast as it inverts only AVO anomalies. A spectral coherence matching technique is employed to transform a zero‐offset extrapolation or near‐offset substack into P‐wave impedance. The same technique is applied to the prediction‐error section obtained by means of partial coherence, in order to estimate S‐wave velocity to P‐wave velocity (VS/VP) ratios. Both techniques assume that accurate well ties, reliable density measurements and P‐wave and S‐wave velocity logs are available, and that impedance contrasts are not too strong. A full Zoeppritz inversion is required when impedance contrasts that are too high are encountered. An added assumption is made for the inversion to the VS/VP ratio, i.e. the Gassmann fluid‐substitution theory is valid within the reservoir area. One synthetic example and one real North Sea in‐line survey illustrate the application of the two coherence methods. 相似文献
11.
PP波和PS波联合反演方法作为有效的地震技术,比单纯纵波反演精度要高,能够提高地震储层识别的精度.以Russell近似理论为基础,推导了新的转换波AVO近似公式,双层模型界面的反射特征数值模拟显示,新公式具有较高的近似精度,且具备直接反演流体因子f、剪切模量μ和密度ρ等参数的优势,有效避免间接反演带来的误差.结合纵横波联合反演理论,提出了基于贝叶斯理论的新型联合反演算法.在实际应用中,对纵波和转换波角道集进行同相轴匹配处理,综合利用纵波和转换波资料携带的信息,实现基于Russell近似的多波联合反演.模型数据和实际资料测试结果表明,反演结果与真实值或测井结果匹配度较高,证实该方法真实有效. 相似文献
12.
A technique allowing inversion of the shale stiffness tensor from standard logging data: sonic velocities, density, porosity and clay content is developed. The inversion is based on the effective medium theory. The testing of the technique on laboratory measurements of the elastic wave velocities in shale samples shows that the inversion makes it possible to predict the elastic wave velocities VP, VS1 and VS2 in any direction within an error of a few per cent. The technique has been applied for the stiffness tensor inversion along a well penetrating a shale formation of the Mississippian age altered by thin layers of limestone. It is demonstrated that the symmetry of a stiffness tensor inverted at the sonic frequency (2 kHz) is slightly orthorhombic and taking into account the experimental errors, can be related to the vertical transverse isotropy symmetry. For the productive interval of the shale formation, the Thomsen parameters ?, γ, and δ average, respectively, 0.32, 0.25 and 0.21, which indicate anelliptic behaviour of the velocities in this shale. The coefficients of anisotropy of this shale interval are around 24% and 20% for the compressional and shear waves, respectively. The values of the inverted velocities in the bedding plane for this interval are in good agreement with the laboratory measurements. The technique also allows inversion of the water saturation of the formation (Sw) and the inverted values are in agreement with the Sw values available for this formation. A Backus‐like upscaling of the inverted stiffness tensors is carried out for the lower and upper bounds of the frequency band used in the crosswell tomography (100 Hz and 500 Hz). These results can serve as an initial velocity model for the microearthquake location during hydrofracking of the shale formation. 相似文献
13.
Inversion of Travel Times in Weakly Anisotropic Rock Samples 总被引：1，自引：0，他引：1
Based on the perturbation theory, inversion formulae for travel time of qP and qS waves in arbitrary weak anisotropy media are presented. The inversion formulae are linear expressions of elastic parameters expressed in terms of weak anisotropy (WA) parameters. The formulae of qS1 and qS2 waves have the same form and they can be used without identifying which wave is considered. A synthetic experiment similar to the measurement of rock sample in the laboratory is carried out to illustrate the efficiency of the presented inversion formulae. Two data sets for qP wave travel time from rock samples in the laboratory are inverted and 15 WA parameters are obtained. 相似文献
14.
Anisotropy is often observed due to the thin layering or aligned micro‐structures, like small fractures. At the scale of cross‐well tomography, the anisotropic effects cannot be neglected. In this paper, we propose a method of full‐wave inversion for transversely isotropic media and we test its robustness against structured noisy data. Optimization inversion techniques based on a least‐square formalism are used. In this framework, analytical expressions of the misfit function gradient, based on the adjoint technique in the time domain, allow one to solve the inverse problem with a high number of parameters and for a completely heterogeneous medium. The wave propagation equation for transversely isotropic media with vertical symmetry axis is solved using the finite difference method on the cylindrical system of coordinates. This system allows one to model the 3D propagation in a 2D medium with a revolution symmetry. In case of approximately horizontal layering, this approximation is sufficient. The full‐wave inversion method is applied to a crosswell synthetic 2‐component (radial and vertical) dataset generated using a 2D model with three different anisotropic regions. Complex noise has been added to these synthetic observed data. This noise is Gaussian and has the same amplitude f?k spectrum as the data. Part of the noise is localized as a coda of arrivals, the other part is not localized. Five parameter fields are estimated, (vertical) P‐wave velocity, (vertical) S‐wave velocity, volumetric mass and the Thomsen anisotropic parameters epsilon and delta. Horizontal exponential correlations have been used. The results show that the full‐wave inversion of cross‐well data is relatively robust for high‐level noise even for second‐order parameters such as Thomsen epsilon and delta anisotropic parameters. 相似文献
15.
In this paper, we derive analytical expressions for one‐way and two‐way kinematical parameters in elliptical tilted transverse isotropy media. We show that the homogeneous elliptical tilted transverse isotropy models result in hyperbolic moveout with a reflection point sideslip x0, which can be considered as an additional traveltime parameter for one‐way wave propagation. For homogeneous elliptical tilted transverse isotropy models we show that the inversion of one‐way traveltime parameters suffers from the ambiguity for large tilts. It is shown that the accuracy of the inversion is sensitive to the error in x0. We also derive and invert the traveltime parameters for a vertically heterogeneous elliptical tilted transverse isotropy model with a tilt gradually changing with depth. The a priori knowledge of parameter δ is very important for inversion. The wrong choise of this parameter results in significant errors in inverted model parameters. 相似文献
16.
Anisotropic elastic full‐waveform inversion of walkaway vertical seismic profiling data from the Arabian Gulf 下载免费PDF全文
下载免费PDF全文 John C Owusu Marwan Charara Scott Leaney Allan Campbell Shujaat Ali Igor Borodin Les Nutt Henry Menkiti 《Geophysical Prospecting》2016,64(1):38-53
Borehole seismic addresses the need for high‐resolution images and elastic parameters of the subsurface. Full‐waveform inversion of vertical seismic profile data is a promising technology with the potential to recover quantitative information about elastic properties of the medium. Full‐waveform inversion has the capability to process the entire wavefield and to address the wave propagation effects contained in the borehole data—multi‐component measurements; anisotropic effects; compressional and shear waves; and transmitted, converted, and reflected waves and multiples. Full‐waveform inversion, therefore, has the potential to provide a more accurate result compared with conventional processing methods. We present a feasibility study with results of the application of high‐frequency (up to 60 Hz) anisotropic elastic full‐waveform inversion to a walkaway vertical seismic profile data from the Arabian Gulf. Full‐waveform inversion has reproduced the majority of the wave events and recovered a geologically plausible layered model with physically meaningful values of the medium. 相似文献
17.
Gualtiero Böhm Flavio Accaino Giuliana Rossi Umberta Tinivella 《Geophysical Prospecting》2006,54(6):721-730
A joint inversion of both first and refracted arrivals is applied on a seismic line, acquired onshore, in order to obtain a well‐resolved velocity field for the computation of static corrections. The use of different arrivals in the inversion involves exploiting the information derived from the different raypaths associated with each wave type, thus enhancing the reliability of the inversion. The data was gathered by Saudi Aramco in an area of the Arabian Peninsula characterized by strong lateral variations, both in topography and shallow velocity, and where therefore a well‐defined near‐surface velocity field is important. In addition to velocity, the depth distribution of the quality factor Q is computed from the tomographic inversion of the seismic‐signal frequency shift. Thus, the Q‐factor field is used to perform an inverse Q‐data filtering and improve the resolution of the final stacked section. 相似文献
18.
Leonardo Azevedo Rúben Nunes Amílcar Soares Guenther Schwedersky Neto Teresa S. Martins 《Geophysical Prospecting》2018,66(Z1):116-131
Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models. 相似文献
19.
Fractures in elastic media add compliance to a rock in the direction normal to the fracture strike. Therefore, elastic wave velocities in a fractured rock will vary as a function of the energy propagation direction relative to the orientation of the aligned fracture set. Anisotropic Thomson–Haskell matrix Rayleigh-wave equations for a vertically transverse isotropic media can be used to model surface-wave dispersion along the principal axes of a vertically fractured and transversely isotropic medium. Furthermore, a workflow combining first-break analysis and azimuthal anisotropic Rayleigh-wave inversion can be used to estimate P-wave and S-wave velocities, Thomsen's ε, and Thomsen's δ along the principal axes of the orthorhombic symmetry. In this work, linear slip theory is used to map our inversion results to the equivalent vertically fractured and transversely isotropic medium coefficients. We carried out this inversion on a synthetic example and a field example. The synthetic data example results show that joint estimation of S-wave velocities with Thomsen's parameters ε and δ along normal and parallel to the vertical fracture set is reliable and, when mapped to the corresponding vertically fractured and transversely isotropic medium, provides insight into the fracture compliances. When the inversion was carried out on the field data, results indicated that the fractured rock is more compliant in the azimuth normal to the visible fracture set orientation and that the in situ normal fracture compliance to tangential fracture compliance ratio is less than half, which implies some cementation may have occurred along the fractures. Such an observation has significant implications when modelling the transport properties of the rock and its strength. Both synthetic and field examples show the potential of azimuthal anisotropic Rayleigh-wave inversion as the method can be further expanded to a more general case where the vertical fracture set orientation is not known a priori. 相似文献
20.
A multi‐azimuth seismic refraction study for a horizontal transverse isotropic medium: physical modelling results 下载免费PDF全文
下载免费PDF全文 To investigate the characteristics of the anisotropic stratum, a multi‐azimuth seismic refraction technique is proposed in this study since the travel time anomaly of the refraction wave induced by this anisotropic stratum will be large for a far offset receiver. To simplify the problem, a two‐layer (isotropy–horizontal transverse isotropy) model is considered. A new travel time equation of the refracted P‐wave propagation in this two‐layer model is derived, which is the function of the phase and group velocities of the horizontal transverse isotropic stratum. In addition, the measured refraction wave velocity in the physical model experiment is the group velocity. The isotropic intercept time equation of a refraction wave can be directly used to estimate the thickness of the top (isotropic) layer of the two‐layer model because the contrast between the phase and group velocities of the horizontal transverse isotropic medium is seldom greater than 10% in the Earth. If the contrast between the phase and group velocities of an anisotropic medium is small, the approximated travel time equation of a refraction wave is obtained. This equation is only dependent on the group velocity of the horizontal transverse isotropic stratum. The elastic constants A11, A13, and A33 and the Thomsen anisotropic parameter ε of the horizontal transverse isotropic stratum can be estimated using this multi‐azimuth seismic refraction technique. Furthermore, under a condition of weak anisotropy, the Thomsen anisotropic parameter δ of the horizontal transverse isotropic stratum can be estimated by this technique as well. 相似文献