首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
The ENE-plunging macroscopic folds, traced by calc gneiss interbanded with marble and sillimanite schist within the Peninsular Gneiss around Suganapuram in the ‘Palghat gap’ in southern India, represent structures of the second generation (D2). They have folded the axial planes of a set of D1 isoclinal folds on stratification coaxially, so that the mesoscopic D1 folds range from reclined in the hinge zones, through inclined to upright in the limb zones of the D2 folds. Orthogonal relation between stratification and axial planar cleavage, and ‘M’ shaped folds on layering locate the hinge zones of the D1 folds, whereas folds on axial planar cleavage with ‘M’ shaped folds are the sites of the D2 fold hinges. Extreme variation in the shapes of the isoclinal D1 folds from class 1B through class 1C to nearly class 2 of Ramsay is a consequence of buckling followed by flattening on layers of widely varying viscosity contrast. The large ENE-trending structures in this supracrustal belt within the Peninsular Gneiss in the ‘Palghat gap’ could not have evolved by reorientation of NS-trending structures of the Dharwar tectonic province to the north by movement along the Moyar-Bhavani shear zone which marks the boundary between the two provinces. This is because the Moyar and Bhavani faults are steep dipping reverse faults with dominant dip-slip component. Deceased  相似文献   

2.
The Southern Granulite Terrain with exposed Archean lower crustal rocks is studied using various geophysical tools. The crustal structure derived from seismic reflection and refraction/wide-angle reflection studies is used to understand the tectonic evolution of the region. Deep seismic reflection section along the Kolattur–Palani segment shows an oppositely dipping reflection fabric near the Moyar–Bhavani shear zone, which is interpreted as a signature of collision between the Dharwar craton and another crustal block in the south. The thickened crust due to collision was delaminated during the orogenic collapse and modified the central part, covering the Cauvery Shear Zone system, located between the Moyar–Bhavani and Karur–Oddanchatram shear zones. The delaminated lower crust is altered by magmatic underplating as evidenced by the high velocity layer just above the Moho. The velocity model of the region indicates crustal thickening at the boundary of the Dharwar craton and Moyar–Bhavani shear zone and thinning further south. Back-scattered seismic wave field with negative moveout and the Moho-offset indicate the spatial location and strike-slip nature of the shear zones. Present study suggests that the late Archean collision and suturing of the Dharwar craton with the southern crustal block at the Moyar–Bhavani shear zone may be responsible for the evolution of late Archean granulites. Late Neoproterozoic rifting is observed along the paleo-fault zones. The seismic studies constrained by gravity, magnetic and magnetotelluric data suggest that the Moyar–Bhavani and Karur–Oddanchatram shear zones of the Cauvery Shear Zone system mark terrane boundaries/suture zones.  相似文献   

3.
黄雄南  张家声  彭澎  李天斌 《岩石学报》2013,29(7):2353-2370
贺兰山北段结晶基底中保留有不同程度的韧性变形剪切带.通过详细的野外考察和室内显微构造研究,明确贺兰山北段的古元古代基底经历了4期韧性剪切变形:(1)早期顺层剪切带表现出中下部地壳层次的变形样式,运动学特征一致反映了近南北向的伸展;(2)麻粒岩相变质的糜棱片麻岩剪切带为南北向挤压的产物,导致经历高温高压变质的孔兹岩系从下地壳向中部地壳抬升;(3)高级糜棱岩(低角闪岩相-高绿片岩相)剪切带涉及的2次伸展运动(北西-南东向伸展和北东-南西向伸展)使得基底进一步向中部地壳抬升,可能发生在形成孔兹岩系的同一造山运动的晚期伸展垮塌过程中;(4)北东-近东西向左行逆冲绿片岩相糜棱岩剪切带则将结晶基底抬升到中上部地壳层次,其运动学特征与高级糜棱岩剪切带明显不同,可能是另一造山运动的产物.贺兰山北段与大青山-乌拉山地区有相似的韧性剪切带和构造变形,表明华北克拉通西部北缘存在一致的近东西走向的古元古代碰撞造山运动以及随后另一造山运动的改造.  相似文献   

4.
Tectonics of proterozoic Cuddapah Basin,southern India: A conceptual model   总被引：1，自引：0，他引：1  
A tectonic map of Cuddapah Basin (CB) and its adjacent regions has been compiled using LANDSAT TM data and the available literature on the prominent tectonic features which include Archaean greenstone belts, disposition of Proterozoic mobile belts along with the associated mid-crustal shear zones, and the mafic dyke swarms. The field characteristics of the two major fault zones: Gudur-Cuddapah and the Veldurti-Kalva-Gani fault system that cut across the CB have been re-examined and are re-interpreted as typical of transfer faults, which are generated exclusively by extensional tectonics. The earlier concept that these fault systems form a conjugate set of “Anderson type” causing the ‘Cuddapah salient’, needs to be reviewed.  相似文献   

5.
Geochemical and geochronological evidence was obtained from granitoids of the South Tianshan orogen and adjacent regions, which consist of three individual tectonic domains, the Kazakhstan–Yili plate, the Central Tianshan Terrane and the Tarim plate from north to south. The Central Tianshan Terrane is structurally bounded by the Early Paleozoic ‘Nikolaev Line–North Nalati Fault’ and Late Paleozoic ‘Atbashy–Inyl’chek–South Nalati–Qawabulak Fault’ zones against the Kazakhstan–Yili and Tarim plates, respectively. The meta-aluminous to weakly peraluminous granitic rocks, which are exposed along the Kekesu River and the Bikai River across the Central Tianshan Terrane, have a tholeiitic, calc-alkaline or high-potassium calc-alkaline composition (I-type). Geochemical trace element characteristics and the Y versus Rb–Nb or Y versus Nb discrimination diagrams favor a continental arc setting for these granitoid rocks. SHRIMP U–Pb and LA-ICP-MS U–Pb zircon age data indicate that the magmatism started at about 480 Ma, continued from 460 to 330 Ma and ended at about 275 Ma. The earlier magmatism (>470 Ma) is considered to be the result of a simultaneous southward and northward subduction of the Terskey Ocean beneath the northern margin of the Tarim plate and the Kazakhstan–Yili plate, respectively. The later magmatism (460–330 Ma) is related to the northward subduction of the South Tianshan Ocean beneath the southern margin of the Kazakhstan–Yili–Central Tianshan plate. The dataset presented here in conjunction with previously published data support a Late Paleozoic tectonic evolution of the South Tianshan orogen, not a Triassic one, as recently suggested by SHRIMP U–Pb zircon dating for eclogites.  相似文献   

6.
The Bhavani Shear Zone (BSZ), part of the Palghat-Cauvery shear system of southern India, comprises a number of subparallel shear zones ranging in width from a few centimetres to tens of metres. These shear zones are characterised by progressive mylonitisation and shear fabrics corresponding to increasing strain, as documented by grain size reduction, flattening, elongation and dimensional preferred orientation of constituent minerals (quartz, hornblende, biotite, plagioclase and orthoclase). However, SEM-EBSD measured crystal preferred orientations (CPO) of these minerals are more complex and indicate interchange of maximum (X) and intermediate (Y) tectonic axes during different phases of deformation, with the minimum axis (Z) remaining approximately constant. The tectonic evolution of the BSZ and the disposition of the surrounding Archaean and Pan-African granulites are interpreted therefore in terms of polyphase deformation involving both dip-slip and strike-slip movement events in a multiply reactivated setting. SEM-EBSD CPO analysis provides clearer indication of potentially conflicting movement directions that are otherwise poorly constrained by shear markers and shear sense indicators.  相似文献   

7.
The Dating rocks and Darjeeling gneisses, which constitute the Sikkim dome in eastern Himalaya, as well as the Gondwana and Buxa rocks of ‘Rangit Window’, disclose strikingly similar sequences of deformation and metamorphism. The structures in all the rocks belong to two generations. The structures of early generation are long-limbed, tight near-isoclinal folds which are often intrafolial and rootless. These intrafolial folds are associated with co-planar tight folds with variably oriented axes and sheath folds with arcuate hinges. Penetrative axial plane cleavage and mineral lineation are related structures; transposition of bedding is remarkable. This early phase of deformation (D 1) is accompanied by constructive metamorphism. The structures of later generation are open, asymmetrical or polyclinal; a crenulation cleavage or discrete fracture may occur. The structures of early generation are distorted by folds of later generation and recrystallized minerals are cataclastically deformed. Recrystallization is meagre or absent during the later phase of deformation (D 2). The present discussion is on structures of early generation and strain environment during theD 1 phase of deformation. The concentration of intrafolial folds in the vicinity of ductile shear zones and decollement or detachment surface (often described as ‘thrust’) may be considered in this context. The rocks of Darjeeling-Sikkim Himalaya display minor structures other than intrafolial folds and variably oriented co-planar folds. The state of finite strain in the rocks, as observed from features like flattened grains and pebbles, ptygmatic folds and boudinaged folds indicate combination of flattening and constrictional type strain. The significance of the intrafolial folds in the same rocks is discussed to probe the environment of strain during progressive deformation (D 1).  相似文献   

8.
The composite airborne total intensity map of the Southern Granulite Terrain (SGT) at an average elevation of 7000' (≈ 2100 m) shows bands of bipolar regional magnetic anomalies parallel to the structural trends suggesting the distribution of mafic/ultramafic rocks that are controlled by regional structures/shear zones and thrusts in this region. The spectrum and the apparent susceptibility map computed from the observed airborne magnetic anomalies provide bands of high susceptibility zones in the upper crust associated with known shear zones/thrusts such as Transition Zone, Moyar-Bhavani and Palghat-Cauvery Shear Zones (MBSZ and PCSZ). The quantitative modelling of magnetic anomalies across Transition Zone, MBSZ and PCSZ suggest the presence of mafic rocks of susceptibility (1.5-4.0 × 10−3 CGS units) in upper crust from 8-10 km extending up to about 21-22 km, which may represent the level of Curie point geotherm as indicated by high upper mantle heat flow in this section.Two sets of paired gravity anomalies in SGT and their modelling with seismic constraints suggest gravity highs and lows to be caused by high density mafic rocks along Transition Zone and Cauvery Shear Zone (CSZ) in the upper crust at depth of 6-8 km and crustal thickening of 45-46 km south of them, respectively. High susceptibility and high density rocks (2.8 g/cm3) along these shear zones supported by high velocity, high conductivity and tectonic settings suggest lower crustal mafic/ultramafic granulite rocks thrusted along them. These signatures with lower crustal rocks of metamorphic ages of 2.6-2.5 Ga north of PCSZ and Neoproterozoic period (0.6-0.5 Ga) south of it suggest that the SGT represents mosaic of accreted crust due to compression and thrusting. These observations along with N-verging thrusts and dipping reflectors from Dharwar Craton to SGT suggest two stages of N-S directed compression: (i) between Dharwar Craton and northern block of SGT during 2.6-2.5 Ga with Transition Zone and Moyar Shear towards the west as thrust, and (ii) between northern and southern blocks of SGT with CSZ as collision zone and PCSZ as thrust during Neoproterozoic period (0.6-0.5 Ga). The latter event may even represent just a compressive phase without any collision related to Pan-African event. The proposed sutures in both these cases separate gravity highs and lows of paired gravity anomalies towards north and south, respectively. The magnetic anomalies and causative sources related to Moyar Shear, MBSZ and PCSZ join with those due to Transition Zone, Mettur and Gangavalli Shears in their eastern parts, respectively to form an arcuate-shaped diffused collision zone during 2.6-2.5 Ga.Most of the Proterozoic collision zones are highlands/plateaus but the CSZ also known as the Palghat Gap represents a low lying strip of 80-100 km width, which however, appears to be related to recent tectonic activities as indicated by high upper mantle heat flow and thin crust in this section. It is supported by low density, low velocity and high conductive layer under CSZ and seismic activity in this region as observed in case of passive rift valleys. They may be caused by asthenospheric upwarping along pre-existing faults/thrusts (MBSZ and PCSZ) due to plate tectonic forces after the collision of Indian and Eurasian plates since Miocene time.  相似文献   

9.
The Ranotsara shear zone in Madagascar has been considered in previous studies to be a >350-km-long, intracrustal strike-slip shear zone of Precambrian/Cambrian age. Because of its oblique strike to the east and west coast of Madagascar, the Ranotsara shear zone has been correlated with shear zones in southern India and eastern Africa in Gondwana reconstructions. Our assessment using remote sensing data and field-based investigations, however, reveals that what previously has been interpreted as the Ranotsara shear zone is in fact a composite structure with a ductile deflection zone confined to its central segment and prominent NW–SE trending brittle faulting along most of its length. We therefore prefer the more neutral term “Ranotsara Zone”. Lithologies, tectonic foliations, and axial trace trajectories of major folds can be followed from south to north across most of the Ranotsara Zone and show only a marked deflection along its central segment. The ductile deflection zone is interpreted as a result of E–W indentation of the Antananarivo Block into the less rigid, predominantly metasedimentary rocks of the Southwestern Madagascar Block during a late phase of the Neoproterozoic/Cambrian East African Orogeny (c. 550–520 Ma). The Ranotsara Zone shows significant NW–SE striking brittle faulting that reactivates part of the NW–SE striking ductile structures in the flexure zone, but also extends along strike toward the NW and toward the SE. Brittle reactivation of ductile structures along the central segment of the Ranotsara Zone, confirmed by apatite-fission track results, may have led to the formation of a shallow Neogene basin underlying the Ranotsara plain. The present-day drainage pattern suggests on-going normal fault activity along the central segment. The Ranotsara Zone is not a megascale intracrustal strike-slip shear zone that crosscuts the entire basement of southern Madagascar. It can therefore not be used as a piercing point in Gondwana reconstructions.  相似文献   

10.
中生代巴彦喀拉-松潘甘孜地体向东昆仑地体斜向俯冲,在东昆仑南缘形成一条巨型的韧性剪切带。剪切带中发育的旋转碎斑、书斜构造、解理阶步、云母鱼、S-C组构、不对称褶皱、雁列脉等宏微观构造,显示剪切带兼具右行和左行的特征,且右行早于左行剪切,但总体以左行剪切为主。对西大滩糜棱岩化花岗岩和小南川未变形花岗岩进行了LA-ICP-MS锆石UPb测年,西大滩岩体侵位于199.3±2.2Ma,小南川岩体形成于196.4±1.3Ma。西大滩与小南川岩体中的锆石为典型的岩浆锆石,其年龄代表了岩体侵位的时代。鉴于2个岩体的变形程度完全不同,东昆仑南缘在199~196Ma之间发生了左行韧性剪切。  相似文献   

11.
The Southern Granulite Terrain (SGT) is composed of high-grade granulite domain occurring to the south of Dharwar Craton (DC). The structural units of SGT show a marked change in the structural trend from the dominant north–south in DC to east–west trend in SGT and primarily consist of different crustal blocks divided by major shear zones. The Bouguer anomaly map prepared based on nearly 3900 gravity observations shows that the anomalies are predominantly negative and vary between −125 mGal and +22 mGal. The trends of the anomalies follow structural grain of the terrain and exhibit considerable variations within the charnockite bodies. Two-dimensional wavelength filtering as well as Zero Free-air based (ZFb) analysis of the Geoid-Corrected Bouguer Anomaly map of the region is found to be very useful in preparing regional gravity anomaly map and inversion of this map gave rise to crustal thicknesses of 37–44 km in the SGT. Crustal density structure along four regional gravity profiles cutting across major shear zones, lineaments, plateaus and other important geological structures bring out the following structural information. The Bavali Shear Zone extending at least up to 10 km depth is manifested as a plane separating two contrasting upper crustal blocks on both sides and the gravity high north of it reveals the presence of a high density mass at the base of the crust below Coorg. The steepness of the Moyar and Bhavani shears on either side of Nilgiri plateau indicates uplift of the plateau due to block faulting with a high density mass at the crustal base. The Bhavani Shear Zone is manifested as a steep southerly dipping plane extending to deeper levels along which alkaline and granite rocks intruded into the top crustal layer. The gravity high over Palghat gap is due to the upwarping of Moho by 1–2 km with the presence of a high density mass at intermediate crustal levels. The gravity low in Periyar plateau is due to the granite emplacement, mid-crustal interface and the thicker crust. The feeble gravity signature across the Achankovil shear characterized by sharp velocity contrast indicates that the shear is not a superficial structure but a crustal scale zone of deformation reaching up to mid-crustal level.  相似文献   

12.
黔东桂北加里东期两类构造变形特征与成因机制探讨   总被引：3，自引：0，他引：3  
早古生代加里东运动造成华南强烈的构造变形,此次构造运动在黔东桂北地区主要表现为都匀运动和广西运动两幕。综合构造变形与沉积环境的研究认为,都匀运动作为局部的构造运动在凯里-三都断裂以西的黔中南地区影响明显;广西运动源于扬子地块和华夏地块沿江山-绍兴断裂带陆内挤压作用,形成自南东向北西的挤压应力的远程效应,向NW影响的范围止于凯里-三都断裂带。两幕构造运动在时空格局联合影响下形成了以断裂为界的两类构造特征：断裂以西主要受都匀运动的影响,发育EW向平缓褶皱、正断层等构造;断裂以东主要受广西运动的影响,发育NE向的褶皱、剪切带等构造。采自高武地区NE向韧性剪切带中的样品,其白云母40Ar/39Ar测年坪年龄为(416.4±1.8) Ma,等时线年龄为(417.7±1.8) Ma;采自黎平地区NE向劈理带中的样品,其绢云母40Ar/39Ar测年坪年龄为(426.5±2.3) Ma,等时线年龄为(437±10) Ma,这些变形年龄代表了广西构造运动发生的时限。  相似文献   

13.
太行山南段自立庄韧性剪切带变形特征   总被引：1，自引：0，他引：1  
张祥信 《地质与勘探》2021,57(1):166-174
太行山南段临城自立庄地区古元古界甘陶河群中低级变质岩中发育一条左行逆冲型韧性剪切带。自立庄韧性剪切带出露长约10 km,宽约1 km,走向NNE,往西缓倾,在EW方向上由若干条强变形带与其间的弱变形域或岩块组成,平面上呈现平行式的组合特征。该韧性剪切带内发育糜棱岩、拉伸线理和皱纹线理、不对称褶皱、石香肠构造和构造透镜体、S-C面理和旋转碎斑等宏观和微观构造。S-C面理、旋转碎斑、不对称褶皱等宏微观变形特征一致表明自立庄韧性剪切带上盘由西往东逆冲的运动学性质。在对韧性剪切带宏观、微观构造特征研究基础上,结合区域资料,认为自立庄韧性剪切带的形成与华北克拉通古元古代末期西部陆块与东部陆块的EW向碰撞拼合有关,是18.5 Ga吕梁运动的产物。自立庄韧性剪切带的厘定为太行山南段古元古代构造演化提供了基础资料。  相似文献   

14.
In the Variscan foreland of SW-Sardinia (Western Mediterranean sea), close to the leading edge of the nappe zone, nappe emplacement caused folding and repetition of stratigraphic successions, km-scale offset of stratigraphic boundaries and an extensive brittle-ductile shear zone. Thrusts assumed a significant role, accommodating a progressive change of shortening direction and forming complicated thrust triangle zones. During thrust emplacement of the nappes, strong penetrative deformation affected rocks beneath the basal thrust of the nappe stack and produced coeval structures with both foreland-directed and hinterland-directed (backthrusting) shear sense. Cross-cutting and overprinting relationships clearly show that the shortening direction changed progressively from N–S to E–W, producing in sequence: (1) E–W trending open folds contemporaneous with early nappe emplacement in the nearby nappe zone; (2) recumbent, quasi-isoclinal folds with axial plane foliation and widespread, “top-towards-the-SW”, penetrative shearing; (3) N–S trending folds with axial plane foliation, contemporaneous with late nappe emplacement; (4) backthrusts and related asymmetrical folds developed during the final stages of shortening, postdating foreland-verging structures. Structures at (3) and (4) occurred during the same tectonic transport “top-towards-the-E” of the nappe zone over the foreland. The several generations of folds, thrusts, and foliations with different orientations developed, result in a complex finite structural architecture, not completely explicable by the theoretical model proposed up to date.  相似文献   

15.
 Sittampundi and Bhavani Archean layered meta-anorthosite complexes occur as tectonic lenses within the Cauvery shear zone (CSZ), a crustal scale shear dividing the Precambrian granulite crust of south India into late Archean (> 2.5 Ga) and Proterozoic (c. 0.55 Ga) blocks. They and their host supracrustal-gneiss rocks record at least two stages of tectonometamorphic history. The first is seen as regional scale refolded isoclinal folds and granulite metamorphism (D1-M1) while the second stage is associated with dominantly E–W dextral transcurrent shearing and metamorphic recrystallisation (D2-MCSZ). Whole rock Sm-Nd isochrons for several comagmatic rocks of the layered complexes yield concordant ages: Sittampundi – 2935±60 Ma, ɛNd + 1.85±0.16 and Bhavani – 2899±28 Ma, ɛNd + 2.18±0.14 (2σ errors). Our Sm-Nd results suggest that: (1) the magmatic protoliths of the Sittampundi and Bhavani layered complexes were extracted from similar uniform and LREE depleted mantle sources; (2) M1 metamorphism occurred soon after emplacement at c.3.0 Ga ago. P-T estimates on garnet granulites from the Sittampundi complex characterise the MCSZ as a high-P event with metamorphic peak conditions of c. 11.8 kbar and 830°C (minimum). The MCSZ is associated with significant isothermal decompression of the order of 4.5–3.5 kbar followed by static high-temperature rehydration and retrogression around 600°C. The timing of MCSZ is inferred to be Neoproterozoic at c. 730 Ma based on a whole rock-garnet-plagioclase-hornblende Sm-Nd isochron age for a garnet granulite from the Sittampundi complex and its agreement with the 800–600 Ma published age data on post-kinematic plutonic rocks within the CSZ. These results demonstrate that the Cauvery shear zone is a zone of Neoproterozoic reworking of Archean crust broadly similar to the interface between the Napier and Rayner complexes of the East Antarctic shield in a model Proterozoic Gondwana supercontinent. Received: 5 December 1995 / Accepted: 3 May 1996  相似文献   

16.
In the eastern part of southern Peninsular India, the charnockitic hills of the Madras block are cut across by the E-W trending Attur shear zone (ASZ) which is characterised by a thick (1 to 1.5 km) phyllonite zone, showing intense mylonitisation due to ductile shearing. Steeply plunging (70°–80°) stretching lineation on steeply dipping mylonitic foliation within this zone indicates a relative vertical upliftment of the adjacent blocks. A dextral shearing event from west to east is envisaged from the kinematic analysis of shear sense indicators such as S-C fabric, asymmetric folds, asymmetric augens and asymmetric porphyroclasts. Simultaneous development of these features, related to vertical and horizontal movements may be explained by the mechanism of transpressional deformation. The Attur shear zone may be correlated with the Moyar shear zone based on distinct lithological and structural similarities.  相似文献   

17.
Gold mineralization in Southern Granulite Terrain (SGT) of India has close spatial relationship with the shear zones (Moyar–Bhavani) present in Cauvery Suture Zone. Gold is found to be associated with primary quartz veins, placers and laterites. The gold prospects in SGT can be broadly grouped into three provinces i) Wynad-Nilgiri, ii) Malappuram and iii) Attappadi. The auriferous quartz veins are within the deformed biotite/hornblende bearing gneisses and amphibolite. Wall rock alteration is conspicuous around the mineralized veins and gives an assemblage of muscovite–calcite–ankerite–chlorite–biotite–pyrite related to fluid–rock interaction at the time of vein formation. Fluid inclusion studies of vein quartz gives an idea of the nature of the ore forming fluids, the fluid involved in gold mineralization is of low saline and aqueous-carbonic in composition and quite similar to the orogenic lode gold deposits reported world-wide. Micro-thermometric data indicates fluid immiscibility (phase separation) during trapping of fluid inclusions and this must have played an important role in gold deposition. Geochronological studies of mineral separates from Wynad-Nilgiri province using Rb–Sr and Sm–Nd isochron methods of the auriferous quartz veins gave an age of approximately 450 Ma for the vein formation. The present studies on SGT gold mineralization indicate 1. During the Pan-African orogeny, extensive fluid influx from mantle and metamorphism extracted gold from a mafic source and were focused along major structural discontinuities of Moyar–Bhavani Shear Zone, 2. The aqueous–carbonic ore fluid interacted with rocks of the upper crust and triggered a set of metasomatic changes responsible for the dissolved components such as Ca, Si and Fe and finally precipitating in the veins and 3. The mineralizing fluid with dissolved gold in sulphide complex got destabilized due to fluid immiscibility and wall rock alteration leading to the deposition of gold with associated sulphide minerals in the vein system.  相似文献   

18.
仲巴微地体夹持于雅江缝合带西段分支的南、北亚带之间,地体内发育韧性滑脱型剪切带。对该类高应变构造带活动时间进行厘定,不仅可以为其形成演化提供制约,而且也可为印度-欧亚板块碰撞过程提供重要的年代学佐证信息。在该剪切带不同变形部位采集了含白云母、黑云母糜棱质岩样品,进行云母类单矿物~(40)Ar-~(39)Ar测年。获取年龄数据3组:53.39±0.57Ma、39.45±0.42Ma、29.41±0.32Ma,表明该剪切带具有多期次构造活动叠加特征。其中第1组年龄代表在印度-欧亚板块初始碰撞阶段,剪切带形成的时代下限(最小年龄),因该剪切带是两大板块初始碰撞的产物,所以可佐证板块起始碰撞时间为53.39±0.57Ma之前的晚白垩世末—始新世初期;第2组年龄代表在板块主碰撞阶段,发生继承性的近南北向挤压剪切作用后白云母的冷却年龄;第3组年龄代表了后碰撞阶段,剪切带的再次滑动后低温隆升时期的黑云母年龄。  相似文献   

19.
Laser-probe dating of mylonite whole-rock samples from the North Tianshan—Main Tianshan fault zone that cross-cuts the North Tianshan domain’s southern margin yielded 40Ar/39Ar spectra with 255–285 Ma ages. Biotite from an undeformed, Early Carboniferous granite, which cuts the steep mylonitic foliation in the Proterozoic basement of the Yili arcs’s southern margin, gave a 263.4 ± 0.6 Ma plateau age (1σ). Pre-Carboniferous metasediments overlying this basement yielded plateau ages (1σ) of 253.3 ± 0.3 (muscovite) and 252.3 ± 0.3 (biotite) Ma. The Permian ages of mylonites date movement on these ductile, dextral strike-slip shear zones, whereas the mica ages are interpreted by recrystallisation as a result of fluid flow around such transcurrent faults. We propose that the Tianshan’s Permian syn-tectonic bimodal magmatism was created in a non-plume-related Yellowstone-like extensional–transtensional tectonic regime. Gold mineralisation, tracing aqueous flow in the crust, peaked in Permian time and continued locally into the Triassic. The picture is emerging that a convective fluid system partly driven by magmatic heat, existed in a strongly fractured and weakened crust with an elevated heat flow, leading to regional-scale isotope resetting. We suggest that surprisingly young isotopic ages in the literature for early orogenic (ultra)high-pressure metamorphism are similarly due to fluid-mediated recrystallisation.  相似文献   

20.
位于松潘—甘孜造山带雅江穹隆群北东部的容须卡岩浆底辟穹隆区,经历了多期构造演化,内部构造极其复杂。为厘清容须卡地区岩浆与穹隆的演化关系,通过野外地质调查及室内综合研究,探讨了容须卡穹隆的地质特征及构造演化。该穹隆中心发育无根或肠状褶皱,及“S”型、“Z”型褶皱和“A”型平卧褶皱; 穹隆外围发育叠加褶皱,反映造山带早期SN向和EW向收缩挤压。该穹隆主要经历了晚三叠世(印支末期)SN向与EW向的“双向挤压”作用; 成穹期岩浆向上侵位时限为(214.4±1.2) Ma; 成穹后经历了挤压推覆和应力松弛阶段; 早中新世(17~10 Ma),由于青藏高原东南缘快速抬升,松潘—甘孜造山带发育NW-SE向鲜水河左旋走滑断裂,使容须卡地区形成一系列NNW向韧脆性和脆性破碎带。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号