首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Hayabusa‐returned samples offer a unique perspective for understanding the link between asteroids and cosmomaterials available in the laboratory, and provide insights on the early stages of surface space weathering. This study characterizes the mineralogy and the extent of space weathering of the three Itokawa particles RA‐QD02‐0163, RA‐QD02‐0174, and RA‐QD02‐0213 provided by JAXA to our consortium. We report here a series of results based on nondestructive analyses through visible‐near‐infrared reflectance and Raman spectroscopy. Results were obtained on the raw particles, both in their original containers and deposited on diamond windows. Identification of the minerals, characterization of their elemental compositions, and measurements of their relative abundances were led through Raman spectroscopy in punctual and automatic mode. Reflectance spectra in the visible and near‐IR wavelengths constrain the mineralogy of the grains and allow direct comparison with the surface of Itokawa. The spectra reflect the extent of space weathering experienced by the three particles. Particle RA‐QD02‐0163 consists of a heterogeneous mixture of minerals: olivine (Fo76) dominates an assemblage with both Ca‐rich (En50, Wo50) and Ca‐poor (En85) pyroxenes. The elemental compositions of the silicates are consistent with those previously reported for distinct Hayabusa particles. Particles RA‐QD‐0174 and RA‐QD02‐0213 are solely composed of olivine, whose chemical composition is similar to that observed in RA‐QD02‐0163. It has been previously shown that the S‐type asteroid 25143 Itokawa is a breccia of poorly equilibrated LL4 and highly equilibrated LL5 and LL6 materials. The three particles studied here can be related to the least metamorphosed lithology (LL4) based on the high forsterite content of the olivine. Neither carbonaceous matter nor hydrated minerals were detected through Raman on the three allocated particles. The NIR‐VIS reflectance (incidence = 45°, light collection at e = 0°) spectra of the three particles, in particular the 1 μm band, are consistent with the presence of both olivine and pyroxene detected via Raman. The spectra of particles RA‐QD02‐0163 and RA‐QD02‐0213 are also fully compatible with the ground‐based observations of asteroid (25143) Itokawa in terms of both spectral features and slope. By contrast, particle RA‐QD02‐0174 has a similar 1 μm band depth but higher (redder) spectral slope than the surface of Itokawa. This probably reveals a variable extent of space weathering among the regolith particles. RA‐QD02‐0174 may contain a higher amount of nanophase metallic iron and nanophase FeS. Such phases are products by space weathering induced by solar wind, previously detected on other Itokawa particles.  相似文献   

2.
The surfaces of airless bodies, such as the Moon and asteroids, are subject to space weathering, which alters the mineralogy of the upper tens of nanometers of grain surfaces. Atom probe tomography (APT) has the appropriate 3‐D spatial resolution and analytical sensitivity to investigate such features at the nanometer scale. Here, we demonstrate that APT can be successfully used to characterize the composition and texture of space weathering products in ilmenite from Apollo 17 sample 71501 at near‐atomic resolution. Two of the studied nanotips sampled the top surface of the space‐weathered grain, while another nanotip sampled the ilmenite at about 50 nm below the surface. These nanotips contain small nanophase Fe particles (~3 to 10 nm diameter), with these particles becoming less frequent with depth. One of the nanotips contains a sequence of space weathering products, compositional zoning, and a void space (~15 nm in diameter) which we interpret as a vesicle generated by solar wind irradiation. No noble gases were detected in this vesicle, although there is evidence for 4He elsewhere in the nanotip. This lunar soil grain exhibits the same space weathering features that have been well documented in transmission electron microscope studies of lunar and Itokawa asteroidal regolith grains.  相似文献   

3.
Abstract— We have analyzed a suite of lunar regolith breccias in order to assess how well space weathering products can be preserved through the lithification process and therefore whether or not it is appropriate to search for space weathering products in asteroidal regolith breccia meteorites. It was found that space weathering products, vapor/sputter deposited nanophase‐iron‐bearing rims in particular, are easily identified in even heavily shocked/compacted lunar regolith breccias. Such rims, if created on asteroids, should thus be preserved in asteroidal regolith breccia meteorites. Two additional rim types, glass rims and vesicular rims, identified in regolith breccias, are also described. These rims are common in lunar regolith breccias but rare to absent in lunar soils, which suggests that they are created in the breccia‐forming process itself. While not “space weathering products” in the strictest sense, these additional rims give us insight into the regolith breccia formation process. The presence or absence of glass and/or vesicular rims in asteroidal regolith breccias will likewise tell us about environmental conditions on the surface of the asteroid body on which the breccia was created.  相似文献   

4.
Abstract– Space weathering products, such as agglutinates and nanophase iron‐bearing rims are easily preserved through lithification in lunar regolith breccias, thus such products, if produced, should be preserved in asteroidal regolith breccias as well. A study of representative regolith breccia meteorites, Fayetteville (H4) and Kapoeta (howardite), was undertaken to search for physical evidence of space weathering on asteroids. Amorphous or npFe0‐bearing rims cannot be positively identified in Fayetteville, although possible glass rims were found. Extensive friction melt was discovered in the meteorite that is difficult to differentiate from weathered materials. Several melt products, including spherules and agglutinates, as well as one irradiated rim and one possible npFe0‐bearing rim were identified in Kapoeta. The existence of these products suggests that lunar‐like space weathering processes are, or have been, active on asteroids.  相似文献   

5.
We report a petrographic and mineralogical survey of tochilinite/cronstedtite intergrowths (TCIs) in Paris, a new CM chondrite considered to be the least altered CM identified to date. Our results indicate that type‐I TCIs consist of compact tochilinite/cronstedtite rims surrounding Fe‐Ni metal beads, thus confirming kamacite as the precursor of type‐I TCIs. In contrast, type‐II TCIs are characterized by complex compositional zoning composed of three different Fe‐bearing secondary minerals: from the outside inwards, tochilinite, cronstedtite, and amakinite. Type‐II TCIs present well‐developed faces that allow a detailed morphological analysis to be performed in order to identify the precursors. The results demonstrate that type‐II TCIs formed by pseudomorphism of the anhydrous silicates, olivine, and pyroxene. Hence, there is no apparent genetic relationship between type‐I and type‐II TCIs. In addition, the complex chemical zoning observed within type‐II TCIs suggests that the alteration conditions evolved dramatically over time. At least three stages of alteration can be proposed, characterized by alteration fluids with varying compositions (1) Fe‐ and S‐rich fluids; (2) S‐poor and Fe‐ and Si‐rich fluids; and (3) S‐ and Si‐poor, Fe‐rich fluids. The presence of unaltered silicates in close association with euhedral type‐II TCIs suggests the existence of microenvironments during the first alteration stages of CM chondrites. In addition, the absence of Mg‐bearing secondary minerals in Paris TCIs suggests that the Mg content increases during the course of alteration.  相似文献   

6.
Abstract— –In March 2001, asteroid (25143) Itokawa, the target of the Japanese Hayabusa spacecraft mission, was in a favorable viewing geometry for ground‐based telescopic study. Visible/near‐infrared (VNIR) spectra (～～0.48 to 0.9 μm) obtained on March 24, 26, and 27 UT, and near‐infrared (NIR) spectra (～～0.75 to 2.5 μm) obtained on March 10, 11, 12, 23, and 24 UT collectively show absorption features centered near 1.0 and 2.0 μm, which are indicative of olivine and pyroxene. Analyses of these absorption features indicate an abundance ratio of olivine to pyroxene of approximately 75:25 ± 5, respectively, with no significant variation in the relative abundance of these minerals across its surface on a regional scale. The band center positions indicate that the mean pyroxene chemistry is ～～Wo14 ± 5Fs43 ± 5. There appear to be at least two pyroxene components: primarily a low‐Ca orthopyroxene accompanied by a spectrally significant (～～15–20%) high Fe‐rich pigeonite phase. The mean pyroxene composition is significantly more Fe‐rich than the Fs14–26 range found in ordinary chondrites. These pyroxene compositions are suggestive of phases crystallized from partial melts. This would indicate that the parent body of (25143) Itokawa reached temperatures sufficient to initiate partial melting (～～1050 to 1250 °C), but that it did not attain the degree of melting required for significant melt mobilization and efficient segregation of the basaltic melt component from the unmelted residual olivine portion. Itokawa's spectral band parameters place it near the S(III)/S(IV) boundary, but within the S(III) taxonomic field. In meteoritic nomenclature, Itokawa would be most analogous to an olivine‐rich primitive achondrite. Alternatively, if the high Fs value is not related to partial melting, then Itokawa could also represent a rare atypical LL chondrite, or a previously unsampled oxidized Fe‐rich chondritic‐like assemblage.  相似文献   

7.
Transmission electron microscope studies of fine‐grained rims in three CM2 carbonaceous chondrites, Y‐791198, Murchison, and ALH 81002, have revealed the presence of widespread nanoparticles with a distinctive core–shell structure, invariably associated with carbonaceous material. These nanoparticles vary in size from ~20 nm up to 50 nm in diameter and consist of a core of Fe,Ni carbide surrounded by a continuous layer of polycrystalline magnetite. These magnetite shells are 5–7 nm in thickness irrespective of the diameter of the core Fe,Ni carbide grains. A narrow layer of amorphous carbon a few nanometers in thickness is present separating the carbide core from the magnetite shell in all the nanoparticles observed. The Fe,Ni carbide phases that constitute the core are consistent with both haxonite and cohenite, based on electron diffraction data, energy dispersive X‐ray analysis, and electron energy loss spectroscopy. Z‐contrast scanning transmission electron microscopy shows that these core–shell magnetite‐carbide nanoparticles can occur as individual isolated grains, but more commonly occur in clusters of multiple particles. In addition, energy‐filtered transmission electron microscopy (EFTEM) images show that in all cases, the nanoparticles are embedded within regions of carbonaceous material or are coated with carbonaceous material. The observed nanostructures of the carbides and their association with carbonaceous material can be interpreted as being indicative of Fischer–Tropsch‐type (FTT) reactions catalyzed by nanophase Fe,Ni metal grains that were carburized during the catalysis reaction. The most likely environment for these FTT reactions appears to be the solar nebula consistent with the high thermal stability of haxonite and cohenite, compared with other carbides and the evidence of localized catalytic graphitization of the carbonaceous material. However, the possibility that such reactions occurred within the CM parent body cannot be excluded, although this scenario seems unlikely, because the kinetics of the reaction would be extremely slow at the temperatures inferred for CM asteroidal parent bodies. In addition, carbides are unlikely to be stable under the oxidizing conditions of alteration experienced by CM chondrites. Instead, it is most probable that the magnetite rims on all the carbide particles are the product of parent body oxidation of Fe,Ni carbides, but this oxidation was incomplete, because of the buildup of an impermeable layer of amorphous carbon at the interface between the magnetite and the carbide phase that arrested the reaction before it went to completion. These observations suggest that although FTT catalysis reactions may not have been the major mechanism of organic material formation within the solar nebula, they nevertheless contributed to the inventory of complex insoluble organic matter that is present in carbonaceous chondrites.  相似文献   

8.
Northwest Africa (NWA) 4898 is the only low‐Ti, high‐Al basaltic lunar meteorite yet recognized. It predominantly consists of pyroxene (53.8 vol%) and plagioclase (38.6 vol%). Pyroxene has a wide range of compositions (En12–62Fs25–62Wo11–36), which display a continuous trend from Mg‐rich cores toward Ca‐rich mantles and then to Fe‐rich rims. Plagioclase has relatively restricted compositions (An87–96Or0–1Ab4–13), and was transformed to maskelynite. The REE zoning of all silicate minerals was not significantly modified by shock metamorphism and weathering. Relatively large (up to 1 mm) olivine phenocrysts have homogenous inner parts with Fo ~74 and sharply decrease to 64 within the thin out rims (~30 μm in width). Four types of inclusions with a variety of textures and modal mineralogy were identified in olivine phenocrysts. The contrasting morphologies of these inclusions and the chemical zoning of olivine phenocrysts suggest NWA 4898 underwent at least two stages of crystallization. The aluminous chromite in NWA 4898 reveals that its high alumina character was inherited from the parental magma, rather than by fractional crystallization. The mineral chemistry and major element compositions of NWA 4898 are different from those of 12038 and Luna 16 basalts, but resemble those of Apollo 14 high‐Al basalts. However, the trace element compositions demonstrate that NWA 4898 and Apollo 14 high‐Al basalts could not have been derived from the same mantle source. REE compositions of its parental magma indicate that NWA 4898 probably originated from a unique depleted mantle source that has not been sampled yet. Unlike Apollo 14 high‐Al basalts, which assimilated KREEPy materials during their formation, NWA 4898 could have formed by closed‐system fractional crystallization.  相似文献   

9.
Records of space weathering are important for understanding the formation and evolution of surface regolith on airless celestial bodies. Current understanding of space weathering processes on asteroids including asteroid‐4 Vesta, the source of the howardite–eucrite–diogenite (HED) meteorites, lags behind what is known for the Moon. In this study, we studied agglutinates, a vesicular glass‐coating lithic clast, and a fine‐grained sulfide replacement texture in the polymict breccia Northwest Africa (NWA) 1109 with electron microscopy. In agglutinates, nanophase grains of FeNi and FeS were observed, whereas npFe0 was absent. We suggested that the agglutinates in NWA 1109 formed from fine‐grained surface materials of Vesta during meteorite/micrometeorite bombardment. The fine‐grained sulfide replacement texture (troilite + hedenbergite + silica) should be a result of reaction between S‐rich vapors and pyroxferroite. The unique Fe/Mn values of relict pyroxferroite indicate a different source from normal HED pyroxenes, arguing that the reaction took place on or near the surface of Vesta. The fine‐grained sulfide replacement texture could be a product of nontypical space weathering on airless celestial bodies. We should pay attention to this texture in future returned samples by asteroid exploration missions.  相似文献   

10.
Abstract— Flight aerogel in Stardust allocation C2092,2,80,47,6 contains percent level concentrations of Na, Mg, Al, S, Cl, K, Ca, Cr, Mn, Fe, and Ni that have a distinctive Fe‐ and CI‐normalized distribution pattern, which is similar to this pattern for ppb level chemical impurities in pristine aerogel. The elements in this aerogel background were assimilated in non‐vesicular and vesicular glass with the numerous nanometer Fe‐Ni‐S compound inclusions. After correction for the background values, the chemical data show that this piece of comet Wild 2 dust was probably an aggregate of small (<500 nm) amorphous ferromagnesiosilica grains with many tiny Fe,Ni‐sulfide inclusions plus small Ca‐poor pyroxene grains. This distinctive Fe‐ and CI‐normalized element distribution pattern is found in several Stardust allocations. It appears to be a common feature in glasses of quenched aerogel melts but its exact nature is yet to be established.  相似文献   

11.
The weathering products present in igneous terrestrial Antarctic samples were analyzed, and compared with those found in the four Miller Range nakhlite Martian meteorites. The aim of these comparisons was to determine which of the alteration phases in the Miller Range nakhlites are produced by terrestrial weathering, and what effect rock composition has on these phases. Antarctic terrestrial samples MIL 05031 and EET 96400, along with the Miller Range nakhlites MIL 03346 and 090032, were found to contain secondary alteration assemblages at their externally exposed surfaces. Despite the difference in primary mineralogy, the assemblages of these rocks consist mostly of sulfates (jarosite in MIL 05031, jarosite and gypsum in EET 96400) and iddingsite‐like Fe‐clay. As neither of the terrestrial samples contains sulfur‐bearing primary minerals, and these minerals are rare in the Miller Range nakhlites, it appears that SO42?, possibly along with some of the Na+, K+, and Ca+ in these phases, was sourced from wind‐blown sea spray and biogenic emissions from the southern ocean. Cl enrichment in the terrestrially derived “iddingsite” of MIL 05031 and MIL 03346, and the presence of halite at the exterior edge of MIL 090032, can also be explained by this process. However, jarosite within and around the olivine‐bound melt inclusions of MIL 090136 is present in the interior of the meteorite and, therefore, is probably the product of preterrestrial weathering on Mars.  相似文献   

12.
The lunar regolith contains a variety of chemically reduced phases of interest to planetary scientists and the most common, metallic iron, is generally ascribed to space weathering processes (Lucey et al. 2006 ). Reports of silicon metal and iron silicides, phases indicative of extremely reducing conditions, in lunar samples are rare (Anand et al. 2004 ; Spicuzza et al. 2011 ). Additional examples of Fe‐silicides have been identified in a survey of particles from Apollo 16 sample 61501,22. Herein is demonstrated the utility of low keV electron probe microanalysis (EPMA), using the Fe Ll X‐ray line, to analyze these submicron phases, and the necessity of accounting for carbon contamination. We document four Fe‐Si and Si0 minerals in lunar regolith return material. The new Fe‐Si samples have a composition close to (Fe,Ni)3Si, whereas those associated with Si0 are close to FeSi2 and Fe3Si7. Atom probe tomography of (Fe,Ni)3Si shows trace levels of C (60 ppma and nanodomains enriched in C, Ni, P, Cr, and Sr). These reduced minerals require orders of magnitude lower oxygen fugacity and more reducing conditions than required to form Fe0. Documenting the similarities and differences in these samples is important to constrain their formation processes. These phases potentially formed at high temperatures resulting from a meteorite impact. Whether carbon played a role in achieving the lower oxygen fugacities—and there is evidence of nearby carbonaceous chondritic material—it remains to be proven that carbon was the necessary component for the unique existence of these Si0 and iron silicide minerals.  相似文献   

13.
We combined high‐resolution and space‐resolved elemental distribution with investigations of magnetic minerals across Fe,Ni‐alloy and troilite interfaces for two nonmagmatic (Morasko and Mundrabilla) IAB group iron meteorites and an octahedrite found in 1993 in Coahuila/Mexico (Coahuila II) preliminarily classified on Ir and Au content as IIAB group. The aim of this study was to elucidate the crystallization and thermal history using gradients of the siderophile elements Ni, Co, Ge, and Ga and the chalcophile elements Cr, Cu, and Se with a focus on magnetic minerals. The Morasko and Coahuila II meteorite show a several mm‐thick carbon‐ and phosphorous‐rich transition zone between Fe,Ni‐alloy and troilite, which is characterized by magnetic cohenite and nonmagnetic or magnetic schreibersite. At Morasko, these phases have a characteristic trace element composition with Mo enriched in cohenite. In both Morasko and Coahuila II, Ni is enriched in schreibersite. The minerals have crystallized from immiscible melts, either by fractional crystallization and C‐ and P‐enrichment in the melt, or by partial melting at temperatures slightly above the eutectic point. During crystallization of Mundrabilla, the field of immiscibility was not reached. Independent of meteorite group and cooling history, the magnetic mineralogy (daubreelite, cohenite and/or schreibersite, magnetite) is very similar to the troilite (and transition zone) for all three investigated iron meteorites. If these minerals can be separated from the metal, they might provide important information about the early solar system magnetic field. Magnetite is interpreted as a partial melting or a terrestrial weathering product of the Fe,Ni‐alloy under oxidizing conditions.  相似文献   

14.
Abstract— It was suggested that multilayered accretionary rims composed of ferrous olivine, andradite, wollastonite, salite‐hedenbergitic pyroxenes, nepheline, and Ni‐rich sulfides around Allende calcium‐aluminum‐rich inclusions (CAIs) are aggregates of gas‐solid condensates which reflect significant fluctuations in physico‐chemical conditions in the slowly cooling solar nebula and grain/gas separation processes. In order to test this model, we studied the mineralogy of accretionary rims around one type A CAI (E104) and one type B CAI (E48) from the reduced CV3 chondrite Efremovka, which is less altered than Allende. In contrast to the Allende accretionary rims, those in Efremovka consist of coarse‐grained (20–40 μm), anhedral forsterite (Fa1–8), Fe, Ni‐metal nodules, amoeboid olivine aggregates (AOAs) and fine‐grained CAIs composed of Al‐diopside, anorthite, and spinel, ± forsterite. Although the fine‐grained CAIs, AOAs and host CAIs are virtually unaltered, a hibonite‐spinel‐perovskite CAI in the E48 accretionary rim experienced extensive alteration, which resulted in the formation of Fe‐rich, Zn‐bearing spinel, and a Ca, Al, Si‐hydrous mineral. Forsterites in the accretionary rims typically show an aggregational nature and consist of small olivine grains with numerous pores and tiny inclusions of Al‐rich minerals. No evidence for the replacement of forsterite by enstatite was found; no chondrule fragments were identified in the accretionary rims. We infer that accretionary rims in Efremovka are more primitive than those in Allende and formed by aggregation of high‐temperature condensates around host CAIs in the CAI‐forming regions. The rimmed CAIs were removed from these regions prior to condensation of enstatite and alkalies. The absence of andradite, wollastonite, and hedenbergite from the Efremovka rims may indicate that these rims sampled different nebular regions than the Allende rims. Alternatively, the Ca, Fe‐rich silicates rimming Allende CAIs may have resulted from late‐stage metasomatic alteration, under oxidizing conditions, of original Efremovka‐like accretionary rims. The observed differences in O‐isotope composition between forsterite and Ca, Fe‐rich minerals in the Allende accretionary rims (Hiyagon, 1998) suggest that the oxidizing fluid had an 16O‐poor oxygen isotopic composition.  相似文献   

15.
Abstract– Chondrule compositions suggest either ferroan precursors and evaporation, or magnesian precursors and condensation. Type I chondrule precursors include granoblastic olivine aggregates (planetary or nebular) and fine‐grained (dustball) precursors. In carbonaceous chondrites, type I chondrule precursors were S‐free, while type II chondrules have higher Fe/Mn than in ordinary chondrites. Many type II chondrules contain diverse forsteritic relicts, consistent with polymict dustball precursors. The relationship between finer and coarser grained type I chondrules in ordinary chondrites suggests more evaporation from more highly melted chondrules. Fe metal in type I, and Na and S in type II chondrules indicate high partial pressures in ambient gas, as they are rapidly evaporated at canonical conditions. The occurrence of metal, sulfide, or low‐Ca pyroxene on chondrule rims suggests (re)condensation. In Semarkona type II chondrules, Na‐rich olivine cores, Na‐poor melt inclusions, and Na‐rich mesostases suggest evaporation followed by recondensation. Type II chondrules have correlated FeO and MnO, consistent with condensation onto forsteritic precursors, but with different ratios in carbonaceous chondrites and ordinary chondrites, indicating different redox history. The high partial pressures of lithophile elements require large dense clouds, either clumps in the protoplanetary disk, impact plumes, or bow shocks around protoplanets. In ordinary chondrites, clusters of type I and type II chondrules indicate high number densities and their similar oxygen isotopic compositions suggest recycling together. In carbonaceous chondrites, the much less abundant type II chondrules were probably added late to batches of type I chondrules from different O isotopic reservoirs.  相似文献   

16.
The formation of the high‐pressure compositional equivalents of olivine and pyroxene has been well‐documented within and surrounding shock‐induced veins in chondritic meteorites, formed by crystallization from a liquid‐ or solid‐state phase transformation. Typically polycrystalline ringwoodite grains have a narrow range of compositions that overlap with those of their olivine precursors, whereas the formation of iron‐enriched ringwoodite has been documented from only a handful of meteorites. Here, we report backscattered electron images, quantitative wavelength‐dispersive spectrometry (WDS) analyses, qualitative WDS elemental X‐ray maps, and micro‐Raman spectra that reveal the presence of Fe‐rich ringwoodite (Fa44‐63) as fine‐grained (500 nm), polycrystalline rims on olivine (Fa24‐25) wall rock and as clasts engulfed by shock melt in a previously unstudied L5 chondrite, Dhofar 1970. Crystallization of majorite + magnesiowüstite in the vein interior and metastable mineral assemblages within 35 μm of the vein margin attest to rapid crystallization of a superheated shock melt (>2300 K) from 20─25 GPa to ambient pressure and temperature. The texture and composition of bright polycrystalline ringwoodite rims (Fa44‐63; MnO 0.01─0.08 wt%) surrounding dark polycrystalline olivine (Fa8‐14; MnO 0.56─0.65 wt%) implies a solid‐state transformation mechanism in which Fe was preferentially partitioned to ringwoodite. The spatial association between ringwoodite and shock melt suggests that the rapidly fluctuating thermal regimes experienced by chondritic minerals in contact with shock melt are necessary to both drive phase transformation but also to prevent back‐transformation.  相似文献   

17.
Abstract— We present a detailed petrographic and electron microprobe study of metal grains and related opaque minerals in the chondrule interiors and rims of the Bishunpur (LL3.1) ordinary chondrite. There are distinct differences between metal grains that are completely encased in chondrule interiors and those that have some portion of their surface exposed outside of the chondrule boundary, even though the two types of metal grains can be separated by only a few microns. Metal grains in chondrule interiors exhibit minor alteration in the form of oxidized P‐, Cr‐, and Si‐bearing minerals. Metal grains at chondrule boundaries and in chondrule rims are extensively altered into troilite and fayalite. The results of this study suggest that many metal grains in Bishunpur reacted with a type‐I chondrule melt and incorporated significant amounts of P, Cr, and Si. As the system cooled, some metal oxidation occurred in the chondrule interior, producing metal‐associated phosphate, chromite, and silica. Metal that migrated to chondrule boundaries experienced extensive corrosion as a result of exposure to the external atmosphere present during chondrule formation. It appears that chondrule‐derived metal and its corrosion products were incorporated into the fine‐grained rims that surround many type‐I chondrules, contributing to their Fe‐rich compositions. We propose that these fine‐grained rims formed by a combination of corrosion of metal expelled from the chondrule interior and accretion of fine‐grained mineral fragments and microchondrules.  相似文献   

18.
To better understand the formation conditions of ferromagnesian chondrules from the Renazzo‐like carbonaceous (CR) chondrites, a systematic study of 210 chondrules from 15 CR chondrites was conducted. The texture and composition of silicate and opaque minerals from each observed FeO‐rich (type II) chondrule, and a representative number of FeO‐poor (type I) chondrules, were studied to build a substantial and self‐consistent data set. The average abundances and standard deviations of Cr2O3 in FeO‐rich olivine phenocrysts are consistent with previous work that the CR chondrites are among the least thermally altered samples from the early solar system. Type II chondrules from the CR chondrites formed under highly variable conditions (e.g., precursor composition, redox conditions, cooling rate), with each chondrule recording a distinct igneous history. The opaque minerals within type II chondrules are consistent with formation during chondrule melting and cooling, starting as S‐ and Ni‐rich liquids at 988–1350 °C, then cooling to form monosulfide solid solution (mss) that crystallized around olivine/pyroxene phenocrysts. During cooling, Fe,Ni‐metal crystallized from the S‐ and Ni‐rich liquid, and upon further cooling mss decomposed into pentlandite and pyrrhotite, with pentlandite exsolving from mss at 400–600 °C. The composition, texture, and inferred formation temperature of pentlandite within chondrules studied here is inconsistent with formation via aqueous alteration. However, some opaque minerals (Fe,Ni‐metal versus magnetite and panethite) present in type II chondrules are a proxy for the degree of whole‐rock aqueous alteration. The texture and composition of sulfide‐bearing opaque minerals in Graves Nunataks 06100 and Grosvenor Mountains 03116 suggest that they are the most thermally altered CR chondrites.  相似文献   

19.
Mineral mapping of the lunar surface is critical to understanding the Moon’s geological diversity and history, yet the global lunar abundance of minerals has not been mapped using hyperspectral data. The Interference Imaging Spectrometer (IIM) of Chang’E-1 mission obtained hyperspectral data of the global lunar surface within the wavelength of 480–960 nm in which major minerals can be discriminated by faint differences in 32 contiguous hyperspectral bands. The effect of space weathering produces multiple endmembers of lunar minerals by obscuring the pure spectra of minerals in different levels. In this study, the distributions of plagioclase, clinopyroxene and olivine on the global lunar surface were mapped with IIM hyperspectral data based on the modified Multiple Endmember Spectral Mixture Analysis (MESMA) method considering the space weathering effect. The distribution of lunar space weathering levels was retrieved as a byproduct of mineral mapping. The mineral mapping results were compared with recent mapping results. Although the wavelength of IIM is limited, it shows that our results are basically consistent with the recent research at both global and local scales. The distribution of space weathering levels is also consistent with the map of optical maturity parameter (OMAT) in most parts of the global lunar surface, especially in the highlands. This study demonstrates that the modified MESMA method is an effective approach to quantitative mapping of the lunar minerals and space weathering levels using hyperspectral data. In the future, more minerals can be mapped with higher accuracy if hyperspectral data with a wider spectral range are used based on the method proposed in this study.  相似文献   

20.
Some of the tridymite in the monomict Northwest Africa (NWA) 11591 eucrite are found to have sulfide‐rich replacement textures (SRTs) to varying degrees. The SRTs of tridymite in NWA 11591 are characterized by the distribution of loose porous regions with aggregates of quartz and minor troilite grains along the rims and fractures of the tridymite, and we propose a new mechanism for the origin of this texture. According to the volume and density conversion relationship, the quartz in the SRT of tridymite with a hackle fracture pattern was transformed from tridymite. We suggest that the primary tridymite grains are affected by the S‐rich vapors along the rims and fractures, leading to the transformation of tridymite into quartz. In addition, the S‐rich vapors reacted with Fe2+, which was transported from the relict tridymite and/or the adjacent Fe‐rich minerals, and/or the S‐rich vapors react with the exotic metallic Fe to form troilite grains. The sulfurization in NWA 11591 most likely occurred during the prolonged subsolidus thermal metamorphism in the shallow crust of Vesta and might be an open, relatively high temperature (>800 °C) process. Sulfur would be an important component of the metasomatic fluid on Vesta.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号