首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Hayabusa‐returned samples offer a unique perspective for understanding the link between asteroids and cosmomaterials available in the laboratory, and provide insights on the early stages of surface space weathering. This study characterizes the mineralogy and the extent of space weathering of the three Itokawa particles RA‐QD02‐0163, RA‐QD02‐0174, and RA‐QD02‐0213 provided by JAXA to our consortium. We report here a series of results based on nondestructive analyses through visible‐near‐infrared reflectance and Raman spectroscopy. Results were obtained on the raw particles, both in their original containers and deposited on diamond windows. Identification of the minerals, characterization of their elemental compositions, and measurements of their relative abundances were led through Raman spectroscopy in punctual and automatic mode. Reflectance spectra in the visible and near‐IR wavelengths constrain the mineralogy of the grains and allow direct comparison with the surface of Itokawa. The spectra reflect the extent of space weathering experienced by the three particles. Particle RA‐QD02‐0163 consists of a heterogeneous mixture of minerals: olivine (Fo76) dominates an assemblage with both Ca‐rich (En50, Wo50) and Ca‐poor (En85) pyroxenes. The elemental compositions of the silicates are consistent with those previously reported for distinct Hayabusa particles. Particles RA‐QD‐0174 and RA‐QD02‐0213 are solely composed of olivine, whose chemical composition is similar to that observed in RA‐QD02‐0163. It has been previously shown that the S‐type asteroid 25143 Itokawa is a breccia of poorly equilibrated LL4 and highly equilibrated LL5 and LL6 materials. The three particles studied here can be related to the least metamorphosed lithology (LL4) based on the high forsterite content of the olivine. Neither carbonaceous matter nor hydrated minerals were detected through Raman on the three allocated particles. The NIR‐VIS reflectance (incidence = 45°, light collection at e = 0°) spectra of the three particles, in particular the 1 μm band, are consistent with the presence of both olivine and pyroxene detected via Raman. The spectra of particles RA‐QD02‐0163 and RA‐QD02‐0213 are also fully compatible with the ground‐based observations of asteroid (25143) Itokawa in terms of both spectral features and slope. By contrast, particle RA‐QD02‐0174 has a similar 1 μm band depth but higher (redder) spectral slope than the surface of Itokawa. This probably reveals a variable extent of space weathering among the regolith particles. RA‐QD02‐0174 may contain a higher amount of nanophase metallic iron and nanophase FeS. Such phases are products by space weathering induced by solar wind, previously detected on other Itokawa particles.  相似文献   

2.
Two silicate grains (RB‐QD04‐0049 and RA‐QD02‐0064, whose estimated masses are 0.050 μg and 0.048 μg, respectively) recovered from the asteroid Itokawa by the Hayabusa spacecraft were studied for their mineralogical characteristics by synchrotron X‐ray diffraction and synchrotron X‐ray microtomography and further analyzed for their bulk chemical compositions by instrumental neutron activation analysis (INAA). According to X‐ray tomography, RB‐QD004‐0049 is composed of olivine, high‐Ca pyroxene, plagioclase, Ca‐phosphate, and troilite, whereas RA‐QD002‐0064 entirely consists of olivine. INAA data are consistent with these mineral compositions except for rare earth elements (REEs). Although the grain RB‐QD004‐0049 contains measurable REEs, which seems to be consistent with the presence of Ca‐phosphate, their abundances are anomalously high. Very low abundance of Co implies less than 0.1 mass% of metals in these two grains by calculation, which is in contrast to the result for the previously analyzed grain RA‐QD02‐0049 (Ebihara et al., 2011). FeO/Sc ratios of the grains fall within the range of those for ordinary chondrite olivines, implying that these grains are extraterrestrial in origin. FeO/MnO ratios also confirm this conclusion and further suggest that the Hayabusa grains analyzed in this study are similar to material found in LL chondrites rather than CK chondrites although olivines from LL and CK chondrites have similar Fa# (molar% of Fe relative to [Fe+Mg] in olivine) (~30) to those of the Hayabusa grains including the two grains analyzed in this study.  相似文献   

3.
In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.  相似文献   

4.
In the near future, a new generation of sample return missions (Hayabusa2, OSIRIS‐REx, MMX, etc.) will collect samples from small solar system bodies. To maximize the scientific outcome of laboratory studies and minimize the loss of precious extraterrestrial samples, an analytical sequence from less destructive to more destructive techniques needs to be established. In this work, we present a combined X‐ray and IR microtomography applied to five Itokawa particles and one fragment of the primitive carbonaceous chondrite Paris. We show that this analytical approach is able to provide a 3‐D physical and chemical characterization of individual extraterrestrial particles, using the measurement of their 3‐D structure and porosity, and the detection of mineral and organic phases, and their spatial co‐localization in 3‐D. We propose these techniques as an efficient first step in a multitechnique analytical sequence on microscopic samples collected by space missions.  相似文献   

5.
We report the B abundances and isotopic ratios of two olivine grains from the S‐type asteroid Itokawa sampled by the Hayabusa spacecraft. Olivine grains from the Dar al Gani (DaG) 989 LL6 chondrite were used as a reference. Since we analyzed polished thin sections in both cases, we expect the contribution from the solar wind B (rich in 10B) to be minimal because the solar wind was implanted only within very thin layers of the grain surface. The Itokawa and DaG 989 olivine grains have homogeneous B abundances (~400 ppb) and 11B/10B ratios compatible with the terrestrial standard and bulk chondrites. The observed homogeneous B abundances and isotopic ratios of the Itokawa olivine grains are likely the result of thermal metamorphism which occurred in the parent asteroid of Itokawa, which had a similar composition as LL chondrites. The chondritic B isotopic ratios of the Itokawa samples suggest that they contain little cosmogenic B (from cosmic‐ray spallation reactions) rich in 10B. This observation is consistent with the short cosmic‐ray exposure ages of Itokawa samples inferred from the small concentrations of cosmogenic 21Ne. If other Itokawa samples have little cosmogenic B as well, the enrichment in 10B found previously on the surface of another Itokawa particle (as opposed to the bulk grain study here) may be attributed to implanted solar wind B.  相似文献   

6.
The mineralogy and mineral chemistry of Itokawa dust particles captured during the first and second touchdowns on the MUSES‐C Regio were characterized by synchrotron‐radiation X‐ray diffraction and field‐emission electron microprobe analysis. Olivine and low‐ and high‐Ca pyroxene, plagioclase, and merrillite compositions of the first‐touchdown particles are similar to those of the second‐touchdown particles. The two touchdown sites are separated by approximately 100 meters and therefore the similarity suggests that MUSES‐C Regio is covered with dust particles of uniform mineral chemistry of LL chondrites. Quantitative compositional properties of 48 dust particles, including both first‐ and second‐touchdown samples, indicate that dust particles of MUSES‐C Regio have experienced prolonged thermal metamorphism, but they are not fully equilibrated in terms of chemical composition. This suggests that MUSES‐C particles were heated in a single asteroid at different temperatures. During slow cooling from a peak temperature of approximately 800 °C, chemical compositions of plagioclase and K‐feldspar seem to have been modified: Ab and Or contents changed during cooling, but An did not. This compositional modification is reproduced by a numerical simulation that modeled the cooling process of a 50 km sized Itokawa parent asteroid. After cooling, some particles have been heavily impacted and heated, which resulted in heterogeneous distributions of Na and K within plagioclase crystals. Impact‐induced chemical modification of plagioclase was verified by a comparison to a shock vein in the Kilabo LL6 ordinary chondrite where Na‐K distributions of plagioclase have been disturbed.  相似文献   

7.
Abstract— Presolar grains are small samples of stardust that can be found at low abundances in some of the most unaltered types of extraterrestrial materials. While earlier laboratory studies of stardust mainly focused on grain types that can be extracted from bulk meteorites by acid dissolution techniques, such as silicon carbide and graphite, recent analyses of presolar silicates rely on isotope imaging searches for locating these grains in situ. Since presolar silicates are generally less than a micrometer in diameter and represent at best only a few hundred ppm of their host materials (e.g., primitive meteorites or interplanetary dust particles), locating and studying these particles can be analytically challenging. Recently, we began using scanning Auger spectroscopy for the in situ elemental characterization of presolar silicate grains as a complement to NanoSIMS isotopic studies for obtaining spatially matched compositional data. Auger spectroscopy is a well‐established analytical technique for elemental characterizations in the material sciences, but has not been widely used in geological applications. We discuss the application of this technique to sub‐micrometer sized silicate grains and address practical issues such as sample preparation, measurement settings, spatial resolution, data processing, and elemental quantification.  相似文献   

8.
On the basis of observations using Cs‐corrected STEM, we identified three types of surface modification probably formed by space weathering on the surfaces of Itokawa particles. They are (1) redeposition rims (2–3 nm), (2) composite rims (30–60 nm), and (3) composite vesicular rims (60–80 nm). These rims are characterized by a combination of three zones. Zone I occupies the outermost part of the surface modification, which contains elements that are not included in the unchanged substrate minerals, suggesting that this zone is composed of sputter deposits and/or impact vapor deposits originating from the surrounding minerals. Redeposition rims are composed only of Zone I and directly attaches to the unchanged minerals (Zone III). Zone I of composite and composite vesicular rims often contains nanophase (Fe,Mg)S. The composite rims and the composite vesicular rims have a two‐layered structure: a combination of Zone I and Zone II, below which Zone III exists. Zone II is the partially amorphized zone. Zone II of ferromagnesian silicates contains abundant nanophase Fe. Radiation‐induced segregation and in situ reduction are the most plausible mechanisms to form nanophase Fe in Zone II. Their lattice fringes indicate that they contain metallic iron, which probably causes the reddening of the reflectance spectra of Itokawa. Zone II of the composite vesicular rims contains vesicles. The vesicles in Zone II were probably formed by segregation of solar wind He implanted in this zone. The textures strongly suggest that solar wind irradiation damage and implantation are the major causes of surface modification and space weathering on Itokawa.  相似文献   

9.
Abstract— Zag and Monahans (1998) are H‐chondrite regolith breccias comprised mainly of light‐colored metamorphosed clasts, dark clasts that exhibit extensive silicate darkening, and a halite‐bearing clastic matrix. These meteorites reflect a complex set of modification processes that occurred on the H‐chondrite parent body. The light‐colored clasts are thermally metamorphosed H5 and H6 rocks that were fragmented and deposited in the regolith. The dark clasts formed from light‐colored clasts during shock events that melted and mobilized a significant fraction of their metallic Fe‐Ni and troilite grains. The clastic matrices of these meteorites are rich in solar‐wind gases. Parent‐body water was required to cause leaching of chondritic minerals and chondrule glass; the fluids became enriched in Na, K, Cl, Br, Al, Ca, Mg and Fe. Evaporation of the fluids caused them to become brines as halides and alkalies became supersaturated; grains of halite (and, in the case of Monahans (1998), halite with sylvite inclusions) precipitated at low temperatures (≤100 °C) in the porous regolith. In both meteorites fluid inclusions were trapped inside the halite crystals. Primary fluid inclusions were trapped in the growing crystals; secondary inclusions formed subsequently from fluid trapped within healed fractures.  相似文献   

10.
Abstract— Mineral particles analogous to components of cosmic dust were tested to determine if their Raman signatures can be recognized after hypervelocity capture in aerogel. The mineral particles were accelerated onto the silica aerogel by light‐gas‐gun shots. It was found that all the individual minerals captured in aerogel could be identified using Raman (or fluorescence) spectra. The laser beam spot size was ?5 micrometers, and in some cases the captured particles were of a similar small size. In some samples fired into aerogel, a broadening and a shift in the wave numbers of some of the Raman bands was observed, a result of the trapped particles being at elevated temperatures due to laser heating. Temperatures of samples were also estimated from the relative intensities of Stokes and anti‐Stokes Raman bands, or, in the case of corundum particles, from the wave number of fluorescence bands excited by the laser. The temperature varied greatly, dependent upon laser power and the nature of the particle. Most of the mineral particles examined had temperatures below 200 °C at a laser power of about 3 mW at the sample. This temperature is sufficiently low enough not to damage most materials expected to be found captured in aerogel in space. In the worst case, some particles were shown to have temperatures of 500–700 °C. In addition, selected meteorite samples were examined to obtain Raman signatures of their constituent minerals and were then shot into aerogel. It was possible to find Raman signatures after capture in aerogel and obtain a Raman map of a whole grain in situ in the aerogel. It is concluded that Raman analysis is indeed well suited for an in situ analysis of micrometer‐sized materials captured in aerogel.  相似文献   

11.
Abstract– We used a combination of different analytical techniques to study particle W7190‐D12 using microinfrared spectroscopy, micro‐Raman spectroscopy, and field emission scanning electron microscopy (FESEM) energy dispersive X‐ray spectroscopy (EDS). The particle consists mainly of hematite (α‐Fe2O3) with considerable variations in structural disorder. It further contains amorphous (Na,K)‐bearing Ca,Al‐silicate and organic carbon. Iron‐bearing spherules (<150 nm in diameter) cover the surface of this particle. At local sites of structural disorder at the hematite surface, the hematite spheres were reduced to FeO in the presence of organic carbons forming FeO‐spheres. However, metallic Fe spheres cannot be excluded based on the available data. To the best of our knowledge, this particle is the first detection of such spherules at the surface of a stratospheric dust particle. Although there is no definitive evidence for an extraterrestrial origin of particle W7190‐D12, we suggest that it could be an IDP that had moved away from the asteroid‐forming region of the early solar system into the outer solar system of the accreting Kuiper Belt objects. After it was released from a Jupiter family comet, this particle became part of the zodiacal cloud. Atmospheric entry flash‐heating caused (1) the formation of microenvironments of reduced iron oxide when indigenous carbon materials reacted with hematite covering its surface resulting in the formation of FeO‐spheres and (2) Na‐loss from Na,Al‐plagioclase. The particle of this study, and other similar particles on this collector, may represent a potentially new type of nonchondritic IDPs associated with Jupiter family comets, although an origin in the asteroid belt cannot be ignored.  相似文献   

12.
The Earth's extraterrestrial dust flux includes a wide variety of dust particles that include FeNi metallic grains. During their atmospheric entry iron micrometeoroids melt and oxidize to form cosmic spherules termed I‐type spherules. These particles are chemically resistant and readily collected by magnetic separation and are thus the most likely micrometeorites to be recovered from modern and ancient sediments. Understanding their behavior during atmospheric entry is crucial in constraining their abundance relative to other particle types and the nature of the zodiacal dust population at 1 AU. This article presents numerical simulations of the atmospheric entry heating of iron meteoroids to investigate the abundance and nature of these materials. The results indicate that iron micrometeoroids experience peak temperatures 300–800 K higher than silicate particles explaining the rarity of unmelted iron particles which can only be present at sizes of <50 μm. The lower evaporation rates of liquid iron oxide leads to greater survival of iron particles compared with silicates, which enhances their abundance among micrometeorites by a factor of 2. The abundance of I‐types is shown to be broadly consistent with the abundance and size of metal in ordinary chondrites and the current day flux of ordinary chondrite‐derived MMs arriving at Earth. Furthermore, carbonaceous asteroids and cometary dust are suggested to make negligible contributions to the I‐type spherule flux. Events involving such objects, therefore, cannot be recognized from I‐type spherule abundances in the geological record.  相似文献   

13.
Primitive substances in asteroid and meteorite materials represent a record of early solar system evolution. To allow the study of these materials, they must be collected and transferred to the laboratory. Collection during sample return missions requires an assessment of the size of samples needed. Meteorite falls or finds must be subdivided into appropriate subsamples for analysis by successive generations of scientists. It is essential, therefore, to determine a representative mass or volume at which the collected or allocated sample is representative of the whole. For the first time, we have used a Bayesian statistical approach and a selected meteorite sample, Murchison, to identify a recommended smallest sample mass that can be used without interferences from sampling bias. Enhancing background knowledge to inform sample selection and analysis is an effective means of increasing the probability of obtaining a positive scientific outcome. The influence of the subdivision mechanism when preparing samples for distribution has also been examined. Assuming a similar size distribution of fragments to that of the Murchison meteorite, cubes can be similarly representative as fragments, but at orders of magnitude smaller sizes. We find that: (1) at all defined probabilities (90%, 95%, and 99%), nanometer‐sized particles (where the axes of a three‐dimensional sample are less that a nanometer in length) are never representative of the whole; (2) at the intermediate and highest defined probabilities (95% and 99%), micrometer‐sized particles are never representative of the whole; and (3) for micrometer‐sized samples, the only sample that is representative of the whole is a cube and then only at a 90% probability. The difference between cubes and fragments becomes less important as sample size increases and any >0.5 mm‐sized sample will be representative of the whole with a probability of 99.9%. The results provide guidance for sample return mission planners and curators or advisory boards that must distribute valuable samples for analysis.  相似文献   

14.
Abstract— Micrometeorites (MMs) are extraterrestrial particles ranging in size from 25 μm to 2 mm that survive atmospheric entry and are collected on the Earth's surface. They represent the largest mass flux (MF) of extraterrestrial material (30,000 ± 20,000 t/yr) to the present‐day Earth. Studies of large collections of MMs suggest that about 20% have not been heated to high temperatures and that they contain organic carbon. Since non‐protein amino acids have been found in some carbonaceous meteorites, they might also be found in unmelted MMs. However, previous searches for amino acids in MMs were inconclusive. We combined a new extraction method for amino acids with a highly sensitive analytical method to detect and quantitate amino acids in MMs collected at the South Pole. We found the non‐protein amino acid α‐amino isobutyric acid (AIB) in one of our samples. The non‐detection of this amino acid in the other samples analyzed suggests that there are amino acid‐containing and amino acid‐free MMs, with ?14% of the MMs containing AIB. Since the MF of MMs is much higher than that of carbonaceous chondrites (CMs), amino acids in these small particles would represent an important source of exogenous delivery of organic molecules. Therefore, the results are discussed on the basis of their implications for astrobiology.  相似文献   

15.
We modeled the possible parent bodies of Itokawa, which was heated within by the decay energy of 26Al. Based on mineralogic studies of dust particles derived from Itokawa by the Hayabusa spacecraft, it appeared that they were thermally metamorphosed at a peak temperature of 800 °C, and kept at 700 °C or higher at 7.6 Myr after CAI formation. Our numerical results show that the parent bodies of Itokawa would have been larger than 20 km in radius and accreted at a period between 1.9 and 2.2 Myr after CAI formation, to satisfy mineralogic and isotopic evidence from dust particles.  相似文献   

16.
We built a collector to filter interplanetary dust particles (IDPs) larger than 5 μm from the clean air at the Amundsen Scott South Pole station. Our sampling strategy used long duration, continuous dry filtering of near‐surface air in place of short duration, high‐speed impact collection on flags flown in the stratosphere. We filtered ~107 m3 of clean Antarctic air through 20 cm diameter, 3 µm filters coupled to a suction blower of modest power consumption (5–6 kW). Our collector ran continuously for 2 years and yielded 41 filters for analyses. Based on stratospheric concentrations, we predicted that each month’s collection would provide 300–900 IDPs for analysis. We identified 19 extraterrestrial (ET) particles on the 66 cm2 of filter examined, which represented ~0.5% of the exposed filter surfaces. The 11 ET particles larger than 5 µm yield about a fifth of the expected flux based on >5 µm stratospheric ET particle flux. Of the 19 ET particles identified, four were chondritic porous IDPs, seven were FeNiS beads, two were FeNi grains, and six were chondritic material with FeNiS components. Most were <10 µm in diameter and none were cluster particles. Additionally, a carbon‐rich candidate particle was found to have a small 15N isotopic enrichment, supporting an ET origin. Many other candidate grains, including chondritic glasses and C‐rich particles with Mg and Si and FeS grains, require further analysis to determine if they are ET. The vast majority of exposed filter surfaces remain to be examined.  相似文献   

17.
The presence and accessibility of a sub‐ice‐surface saline ocean at Enceladus, together with geothermal activity and a rocky core, make it a compelling location to conduct further, in‐depth, astrobiological investigations to probe for organic molecules indicative of extraterrestrial life. Cryovolcanic plumes in the south polar region of Enceladus enable the use of remote in situ sampling and analysis techniques. However, efficient plume sampling and the transportation of captured organic materials to an organic analyzer present unique challenges for an Enceladus mission. A systematic study, accelerating organic ice‐particle simulants into soft inert metal targets at velocities ranging 0.5–3.0 km s−1, was carried out using a light gas gun to explore the efficacy of a plume capture instrument. Capture efficiency varied for different metal targets as a function of impact velocity and particle size. Importantly, organic chemical compounds remained chemically intact in particles captured at speeds up to ~2 km s−1. Calibration plots relating the velocity, crater, and particle diameter were established to facilitate future ice‐particle impact experiments where the size of individual ice particles is unknown.  相似文献   

18.
Abstract— Sample preparation is always a critical step in the study of micrometer‐sized astromaterials available for study in the laboratory, whether their subsequent analysis is by electron microscopy or secondary ion mass spectrometry. A focused beam of gallium ions has been used to prepare electron transparent sections from an interplanetary dust particle (IDP), as part of an integrated analysis protocol to maximize the mineralogical, elemental, isotopic, and spectroscopic information extracted from one individual particle. In addition, focused ion beam (FIB) techniques have been employed to extract cometary residue preserved on the rims and walls of microcraters in 1100 series aluminum foils that were wrapped around the sample tray assembly on the Stardust cometary sample collector. Non‐ideal surface geometries and inconveniently located regions of interest required creative solutions. These include support pillar construction and relocation of a significant portion of sample to access a region of interest. Serial sectioning, in a manner similar to ultramicrotomy, is a significant development and further demonstrates the unique capabilities of focused ion beam microscopy for sample preparation of astromaterials.  相似文献   

19.
Abstract— –In March 2001, asteroid (25143) Itokawa, the target of the Japanese Hayabusa spacecraft mission, was in a favorable viewing geometry for ground‐based telescopic study. Visible/near‐infrared (VNIR) spectra (～～0.48 to 0.9 μm) obtained on March 24, 26, and 27 UT, and near‐infrared (NIR) spectra (～～0.75 to 2.5 μm) obtained on March 10, 11, 12, 23, and 24 UT collectively show absorption features centered near 1.0 and 2.0 μm, which are indicative of olivine and pyroxene. Analyses of these absorption features indicate an abundance ratio of olivine to pyroxene of approximately 75:25 ± 5, respectively, with no significant variation in the relative abundance of these minerals across its surface on a regional scale. The band center positions indicate that the mean pyroxene chemistry is ～～Wo14 ± 5Fs43 ± 5. There appear to be at least two pyroxene components: primarily a low‐Ca orthopyroxene accompanied by a spectrally significant (～～15–20%) high Fe‐rich pigeonite phase. The mean pyroxene composition is significantly more Fe‐rich than the Fs14–26 range found in ordinary chondrites. These pyroxene compositions are suggestive of phases crystallized from partial melts. This would indicate that the parent body of (25143) Itokawa reached temperatures sufficient to initiate partial melting (～～1050 to 1250 °C), but that it did not attain the degree of melting required for significant melt mobilization and efficient segregation of the basaltic melt component from the unmelted residual olivine portion. Itokawa's spectral band parameters place it near the S(III)/S(IV) boundary, but within the S(III) taxonomic field. In meteoritic nomenclature, Itokawa would be most analogous to an olivine‐rich primitive achondrite. Alternatively, if the high Fs value is not related to partial melting, then Itokawa could also represent a rare atypical LL chondrite, or a previously unsampled oxidized Fe‐rich chondritic‐like assemblage.  相似文献   

20.
In March 2001, the Hayabusa spacecraft target, Asteroid 25143 Itokawa, made its final close approach to Earth prior to the spacecraft's launch. We carried out an extensive observing campaign from January to September 2001 to better characterize this near-Earth asteroid. Global physical properties of the surface of Itokawa were characterized by analyzing its photometric properties and behavior. Results included here capitalize on analysis of broadband photometric observations taken with a number of telescopes, instruments, and observers. We employed a Hapke model to estimate the surface roughness, single particle scattering albedo, single particle scattering characteristics, phase integral, and geometric and bond albedo. We find that this asteroid has a higher geometric albedo than average main belt S-class asteroids; this is consistent with results from other observers. The broadband colors of Itokawa further support evidence that this is an atypical S-class asteroid. Broadband colors show spectral characteristics more typically found on large-diameter main-belt asteroids believed to be space-weathered, suggesting the surface of this small diameter, near-Earth asteroid could likewise be space-weathered.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号