首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 511 毫秒
1.
Three main shocks M-1, M-2 and M-3 (17 October 2005 at 05:45 UTC, M w 5.4; 17 October at 09:46 UTC, M w 5.8 and 20 October at 21:40 UTC, M w 5.9) and their associated aftershocks within the Gulf of S i ğac i k, 50 km southwest of Izmir, Turkey were studied in detail. A temporary seismic network deployed during the activity allowed the hypocentre of M-3 and subsequent aftershocks to be determined with high accuracy. A relative relocation technique was used to improve the epicentres of M-1 and M-2. All three main shocks have strike-slip mechanisms which agree with the linear trends of the aftershock locations. Two distinct zones were illuminated by the aftershock locations. The zones contain clear echelon patterns with slightly different orientations from the trend of the aftershock distribution. M-2 and M-3 ruptured along of the eastern rupture zone which aligns N45°E. However the strike direction of M-1 is not clearly identified. The alignment of the two rupture zones intersect at their southern terminus at an angle of 90°. The fault zones form conjugate pair system and static triggering is considered as a probable mechanism for the sequential west to east occurrence of M-1, M-2 and M-3. This earthquake sequence provides seismological evidence for conjugate strike-slip faulting co-existing within a region dominated by north–south extension and well-developed east–west trending normal faults.  相似文献   

2.
The Benevento region is part of the southern Apennines seismogenic belt, which experienced large destructive seismic events both in historical and in recent times. The study area lies at the northern end of the Irpinia fault, which ruptured in 1980 with a Ms = 6.9 normal faulting event, which caused about 3000 casualties. The aims of this paper are to image lateral heterogeneities in the upper crust of the Benevento region, and to try to identify the fault segments that are expected to generate such large earthquakes. This work is motivated by the recognition that lithological heterogeneities along major fault zones, inferred from velocity anomalies, reflect the presence of fault patches that behave differently during large rupture episodes. In this paper, we define the crustal structure of the Benevento region by using the background seismicity recorded during 1991 and 1992 by a local seismic array. These data offer a unique opportunity to investigate the presence of structural discontinuities of a major seismogenic zone before the occurrence of the next large earthquake. The main result that we obtained is the delineation of two NW-trending high-velocity zones (HVZs) in the upper crust beneath the Matese limestone massif. These high velocities are interpreted as high-strength regions that extend for 30-40 km down to at least 12 km depth. The correspondence of these HVZs with the maximum intensity regions of historical earthquakes (1688 AD, 1805 AD) suggests that these anomalies delineate the extent of two fault segments of the southern Apenninic belt capable of generating M = 6.5−7 earthquakes. The lateral offset observed between the two segments from tomographic results and isoseismal areas is possibly related to transverse right-lateral faults.  相似文献   

3.
An Mw 5.9 earthquake occurred in the Lake Rukwa rift, Tanzania, on 1994 August 18, and was well recorded by 20 broad-band seismic stations at distances of 160 to 800 km and 21 broad-band stations at teleseismic distances. The regional and teleseismic waveforms have been used to investigate the source characteristics of the main shock, and also to locate aftershocks that occurred within three weeks of the main shock. Teleseismic body-wave modelling yields the following source parameters for the main shock: source depth of 25 ± 2 km, a normal fault orientation, with a horizontal tension axis striking NE-SW and an almost vertical pressure axis (Nodal Plane I: strike 126°–142°, dip 63°–66°, and rake 280°–290°; Nodal Plane II: strike 273°–289°, dip 28°–31°, and rake 235°–245°), a scalar moment of 4.1 times 1017 N m, and a 2 s impulsive source time function. Four of the largest aftershocks also nucleated at depths of 25 km, as deduced from regional sPmp–Pmp times. The nodal planes are broadly consistent with the orientation of both the Lupa and Ufipa faults, which bound the Rukwa rift to the northeast and southwest, respectively. The rupture radius of the main shock, assuming a circular fault, is estimated to be 4 km with a corresponding stress drop of 6.5 MPa. Published estimates of crustal thickness beneath the Rukwa rift indicate that the foci of the main shock and aftershocks lie at least 10 km above the Moho. The presence of lower-crustal seismicity beneath the Rukwa rift suggests that the pre-rift thermal structure of the rifted crust has not been strongly modified by the rifting, at least to depths of 25 km.  相似文献   

4.
Following the 1996 February 18 M L = 5.2 earthquake in the Agly massif in the eastern French Pyrenees, we installed a temporary network of seismometers around the epicentre. In this paper, we analyse 336 well-located aftershocks recorded from February 19 to February 23 by 18 temporary stations and two permanent stations located less than 35  km from the epicentre. Most aftershocks have been located with an accuracy better than 1.5  km in both horizontal and vertical positions. Their spatial distribution suggests the reactivation of a known fault system. We determined 39 fault-plane solutions using P -wave first motions. Despite their diversity, the focal mechanisms yield an E–W subhorizontal T-axis. We also determined fault-plane solutions and principal stress axes using the method developed by Rivera & Cisternas (1990 ) for the 15 best-recorded events. We obtain a pure-shear-rupture tectonic regime under N–S subhorizontal compression and E–W subhorizontal extension. These principal stress axes, which explain the focal mechanisms for at least 75 per cent of the 39 aftershocks, are different from the axes deduced from the main shock. The post-earthquake stress field caused by the main-shock rupture, modelled as sinistral strike slip on three vertical fault segments, is computed for various orientations and magnitudes of the regional stress field, assumed to be horizontal. The aftershock distribution is best explained for a compressive stress field oriented N30°E. Most aftershocks concentrate where the Coulomb failure stress change increases by more than 0.2  MPa. The diversity of aftershock focal mechanisms, poorly explained by this model, may reflect the great diversity in the orientations of pre-existing fractures in the Agly massif.  相似文献   

5.
Summary. In this study a locally recorded aftershock sequence of the 1978 Tabas-e-Golshan earthquake ( Ms = 7.4) was accurately located. Out of 1560 located events, 329 best-located aftershocks passed a strict quality criterion. These well-located aftershocks, which have uncertainties in epicentre and in focal depth of about 1 and 2 km respectively, together with the well-constrained focal mechanisms, provided a detailed picture of active continental deformation during an aftershock sequence.
Almost all aftershocks follow very closely the pattern of the earthquake faults at the surface and lie in the hanging-wall block of the active fault. The hypocentres occurred mainly at depths less than 23 km with a high concentration of seismic activity between 8–14 km depth. The aftershocks clearly demonstrate an active imbricate listric thrust system with fault planes flattening into a basement decollement zone, and the reactivation of different basement reverse faults in response to a considerable amount of shortening of the top sedimentary cover. The sense of motion was almost universally thrusting and the aftershocks shared the same tectonic causes as the main shock.
The study indicates that the development of the young fold-thrust mountain belts necessarily involves basement shortening (thin-and thick-skinned tectonics) and that the 'frontal reverse faults' in young active fold-thrust mountain belts are the most seismically active faults. Geological and seismic data propose that the active frontal reverse fault systems are possibly reactivated old normal faults and may add support to the contention of reversal of fault motion during re thickening of continental crust. The active 'thin-and thick-skinned tectonics' documented in this study may prevail in other young and active fold-thrust mountain belts which are characterized by a thick sequence of telescoped top sedimentary cover over a decollement detachment zone.  相似文献   

6.
Source history of the 1905 great Mongolian earthquakes (Tsetserleg, Bolnay)   总被引：1，自引：0，他引：1  
Two great Mongolian earthquakes, Tsetserleg and Bolnay, occurred on 1905 July 9 and 23. We determined the source history of these events using body waveform inversion. The Tsetserleg rupture (azimuth N60°) correspond to a N60° oriented branch of the long EW oriented Bolnay fault.
Historical seismograms recorded by Wiechert instruments are digitized and corrected for the geometrical deformation due to the recording system. We use predictive filters to recover the signals lost at the minute marks.
The total rupture length for the Tsetserleg earthquake may reach up to 190 km, in order to explain the width of the recorded body waves. This implies adding 60 km to the previously mapped fault. The rupture propagation is mainly eastward. It starts at the southwest of the central subsegment, showing a left lateral strike-slip with a reverse component. The total duration of the modelled source function is 65 s. The seismic moment deduced from the inversion is 1021 N m, giving a magnitude   M w = 8  .
The nucleation of the Bolnay earthquake was at the intersection between the main fault (375 km left lateral strike-slip) and the Teregtiin fault (N160°, 80 km long right lateral strike-slip with a vertical component near the main fault). The rupture was bilateral along the main fault: 100 km to the west and 275 km to east. It also propagated 80 km to the southeast along the Teregtiin fault. The source duration was 115 s. The moment magnitude Mw varies between 8.3 and 8.5.
The nucleation and rupture depths remain uncertain. We tested three cases: (1) nucleation and rupture depth limited to the seismogenic zone; (2) nucleation in the seismogenic zone and rupture propagation going to the base of the crust and (3) nucleation within the crust–upper mantle interface and rupture propagation within the upper mantle.  相似文献   

7.
We systematically analysed shear wave splitting (SWS) for seismic data observed at a temporary array and two permanent networks around the San Andreas Fault (SAF) Observatory at Depth. The purpose was to investigate the spatial distribution of crustal shear wave anisotropy around the SAF in this segment and its temporal behaviour in relation to the occurrence of the 2004 Parkfield M 6.0 earthquake. The dense coverage of the networks, the accurate locations of earthquakes and the high-resolution velocity model provide a unique opportunity to investigate anisotropy in detail around the SAF zone. The results show that the primary fast polarization directions (PDs) in the region including the SAF zone and the northeast side of the fault are NW–SE, nearly parallel or subparallel to the SAF strike. Some measurements on the southwest side of the fault are oriented to the NNE–SSW direction, approximately parallel to the direction of local maximum horizontal compressive stress. There are also a few areas in which the observed fast PDs do not fit into this general pattern. The strong spatial variations in both the measured fast PDs and time delays reveal the extreme complexity of shear wave anisotropy in the area. The top 2–3 km of the crust appears to contribute the most to the observed time delays; however substantial anisotropy could extend to as deep as 7–8 km in the region. The average time delay in the region is about 0.06 s. We also analysed temporal patterns of SWS parameters in a nearly 4-yr period around the 2004 Parkfield main shock based on similar events. The results show that there are no appreciable precursory, coseismic, or post-seismic temporal changes of SWS in a region near the rupture of an M 6.0 earthquake, about 15 km away from its epicentre.  相似文献   

8.
Summary. An array of 28 portable seismic stations was operated in the region of El Asnam following the magnitude 7.3 ( M s) thrust earthquake of 1980 October 10. Locations of 494 events are presented in this paper and provide an indication of the overall form of the aftershock distribution. Tests to establish location accuracy (particularly depth) reduce this set to 277 events which, it is argued, are well constrained. P -waves alone are used in this study as a consequence of a debate about the reliability of reading S -phases. From the reduced set of 277 events, 81 events provide well-constrained focal mechanisms.
The locations are presented in the form of maps and cross-sections, and discussed in relation to information already derived from field mapping of surface breaks and teleseismic studies of the waveforms of the main event. The zone of surface faulting (including secondary normal faulting) extended for 35 km but the aftershock distribution extends for twice this distance. Along the part of the fault which experienced substantial displacement in the main shock, the fault plane itself appears to be devoid of aftershocks, although many lie in the footwall beneath the fault. At junctions between segments of thrust faulting, strike-slip motion occurs. This is apparent in the aftershock focal mechanisms, and in the surface ruptures in one place.
The large number of aftershocks in the north-east area appears to be due to the reactivation of a fan-like system of smaller reverse faults associated with surface folding. Activity at the south-west end is considerably less than that in the north-east, and is not obviously associated with recognizable geological or morphological features.  相似文献   

9.
The Ethiopian side of central Afar was struck in August 1989 by the largest seismic sequence (three 6.1 ≤ M s ≤ 6.3 events, 15 with M s or m b ≥ 5.0) since that of Serdo in 1969. Using the Djibouti seismological network, we relocated 297 of the events of that sequence. As most of the large events took place outside the network, we assessed the accuracy and stability of earthquake relocations by using three different velocity models and two relocation codes to try to relate individual shocks to distinct faults and surface breaks. A majority of the events apparently occurred underneath the floor of the Dôbi graben, an area about 45  km long and 15  km wide, rupturing boundary and inner floor faults, in agreement with the surface cracks and scarps that we mapped in the area. The relocation shows that the principal events propagated about 50  km northwestwards along the graben in the first 40  hr. A day and a half after the beginning of the sequence, smaller events ( M ≤ 4) started to propagate more than 55  km eastwards, towards Asal Lake. Using two three-component stations installed near the Ethiopian border, we could determine reliable depths for 21 events. The depths are compatible with a seismogenic crust about 14  km thick in the Dôbi and Hanle graben area. Although the Dôbi sequence ruptured about 50  km of the fault array extending from Serdo to Asal, where the regional stress was released by earthquakes in 1969 and 1978, respectively, a seismic gap about 50  km long still subsists along the northern part of the Gaggade region (Der'êla half-graben).  相似文献   

10.
The seismicity rate in the Mudurnu Valley of Turkey was studied using an earthquake catalogue that reports events homogeneously down to magnitude 2.3 for the years 1985–1989, and covers the area between latitudes 40.2° and 41.0°N, and longitudes 30.0° and 31.5°E. During this period the only two main shocks, M = 4.0 and M = 4.3, occurred on 1988 September 6 and 1988 December 9 within about 30km of each other. A highly significant seismic quiescence is evident in the area surrounding these main shocks, while the seismicity rate in the rest of the area covered by the catalogue remains constant. the quiescence becomes more pronounced the smaller the area around the main shocks that is studied. the smallest areas that can be studied contain about 60 earthquakes and have dimensions of approximately 25km on each side. the decreases in seismicity rates are 50–80 per cent depending on the volume and period used for defining the quiescence. the quiescence started in 1988 January and lasted about seven months, with approximately 4.5 months of normal activity separating it from the main shock of December. the precursor time of 12 months for an M = 4.3 main shock is similar to those observed in California. It is concluded that it is possible to resolve precursory quiescence before moderate and large earthquakes in the Mudurnu area with the existing seismograph network.  相似文献   

11.
We analysed aftershocks recorded by a temporary digital seismic network following the moderate M w = 5.5 1993, Scotts Mills, Oregon, earthquake. A technique to retrieve source moment tensors from local waveforms was developed, tested, and applied to 41 small earthquakes ( M w ranging from 1.6 to 3.2). The derived focal mechanisms, although well resolved, are highly variable and do not share a common nodal plane. In contrast, the majority of the events, relocated with a joint hypocentre determination algorithm, collapse to a well-focused plane. The incompatibility of the nodal planes of most events with the plane defined by their locations suggests that the aftershocks did not occur on the fault plane, but tightly around it, outlining the rupture area rather than defining it. Furthermore, the moment tensors reveal stable P -axes, whereas T  -axes plunges are highly dispersed. We detect a rotation of average T  -axis plunge with depth, indicating a change from shallower, predominantly dip-slip mechanisms to deeper strike-slip mechanisms. These characteristics are difficult to explain by remnant stress concentrations on the main-shock rupture plane or asperity- and barrier-type models. We suggest that the aftershocks occurred under the ambient regional stress, triggered by a sudden weakening of the region surrounding the main-shock slip, rather than from a shear stress increase due to the main shock.  相似文献   

12.
We present observations of ground accelerations recorded at a small array close to the fault during the Düzce earthquake and its early aftershocks. The records show the strong spatial variability of ground acceleration over distances of only a few hundred metres. During the main shock, the peak horizontal acceleration values ranged from 0.3 to about 1.0 g at stations distant of 1.5 km only. We attribute this spatial variability to a fault zone site effect as peak ground acceleration steadily increases as the distance to the fault trace decreases. The spectral ratio between the ground motion recorded near the fault and the one outside the fault zone shows a shift of the spectral peak to lower frequencies with increasing peak accelerations. Such an observation suggests a non-linear behaviour of the fault zone due to the strong ground shaking. As much as a 45 per cent reduction in the shear wave velocity is necessary for the observed shifts. The opening of pre-existing cracks throughout the fault zone is the proposed mechanism to account for the observed shear wave reductions. The observation that elastic fault zone properties are soon recovered following episodes of large strains shows that cracks and fissures close rapidly after the strong shaking is over.  相似文献   

13.
A seismic-array study of the continental crust and upper mantle in the Ivrea-Yerbano and Strona-Ceneri zones (northwestern Italy) is presented. A short-period network is used to define crustal P - and S -wave velocity models from earthquakes. The analysis of the seismic-refraction profile LOND of the CROP-ECORS project provided independent information and control on the array-data interpretation.
Apparent-velocity measurements from both local and regional earthquakes, and time-term analysis are used to estimate the velocity in the lower crust and in the upper mantle. The geometry of the upper-lower crust and Moho boundaries is determined from the station delay times.
We have obtained a three-layer crustal seismic model. The P -wave velocity in the upper crust, lower crust and upper mantle is 6.1±0.2 km s−1, 6.5±0.3 km s−1 and 7.8±0.3 km s−1 respectively. Pronounced low-velocity zones in the upper and lower crust are not observed. A clear change in the velocity structure between the upper and lower crust is documented, constraining the petrological interpretation of the Ivrea-type reflective lower continental crust derived from small-scale petrophysical data. Moreover, we found a V P/ V S ratio of 1.69±0.04 for the upper crust and 1.82±0.08 for the lower crust and upper mantle. This is consistent with the structural and petrophysical differences between a compositionally uniform and seismically transparent upper crust and a layered and reflective lower crust. The thickness of the lower crust ranges from about 8 km in front of the Ivrea body (ARVO, Arvonio station) in the northern part of the array to a maximum of about 15 km in the southern part of the array. The lower crust reaches a minimum depth of 5 km below the PROV (Provola) station.  相似文献   

14.
Summary. A preliminary study of the aftershocks of three earthquakes that occurred near to Corinth (Greece) in 1981 is combined with observations of the morphology and faulting to understand the evolution of the Eastern Gulf of Corinth. The well located aftershocks form a zone 60km long and 20km wide. They do not lie on the main fault planes and are mostly located between the north-dipping faulting on which the first two earthquakes occurred and the south-dipping faulting associated with the third event. A cluster of aftershocks also lies in the footwall of the eastern end of the south-dipping fault of the third event.
Morphologically, it is observed that in the evolution of the Eastern Gulf of Corinth, antithetic faulting apparently predates the appearance of the main faulting at the surface. This evolution can be explained by motion on a deep seated, shallow angle, aseismic normal fault. A model based on such a fault also accounts for the aftershock distribution of the 1981 earthquakes.  相似文献   

15.
By inversion analysis of the baseline changes and horizontal displacements observed with GPS (Global Positioning System) during 1990–1994, a high-angle reverse fault was detected in the Shikoku-Kinki region, southwest Japan. The active blind fault is characterized by reverse dip-slip (0.7±0.2  m yr−1 within a layer 17–26  km deep) with a length of 208±5  km, a (down-dip) width of 9±2  km, a dip-angle of 51°±2° and a strike direction of 40°±2° (NE). Evidence from the geological investigation of subfaults close to the southwestern portion of the fault, two historical earthquakes ( M L=7.0, 1789 and 6.4, 1955) near the centre of the fault, and an additional inversion analysis of the baseline changes recorded by the nationwide permanent GPS array from 18 January to 31 December 1995 partially demonstrates the existence of the fault, and suggests that it might be a reactivation of a pre-existing fault in this region. The fact that hardly any earthquakes ( M L>2.0) occurred at depth on the inferred fault plane suggests that the fault activity was largely aseismic. Based on the parameters of the blind fault estimated in this study, we evaluated stress changes in this region. It is found that shear stress concentrated and increased by up to 2.1 bar yr−1 at a depth of about 20  km around the epicentral area of the 1995 January 17  Kobe earthquake ( M L=7.2, Japan), and that the earthquake hypocentre received a Coulomb failure stress of about 5.6 bar yr−1 during 1990–1994. The results suggest that the 1995  Kobe earthquake could have been induced or triggered by aseismic fault movement.  相似文献   

16.
Statistical study of the occurrence of shallow earthquakes   总被引：1，自引：0，他引：1  
Summary. The time—space-magnitude interaction of shallow earthquakes has been investigated for three catalogues: worldwide ( M ≥ 7.0), Southern and Northern California ( M ≥ 4.0) and Central California ( M ≥ 1.5). The earthquake sequences are considered as a multi-dimensional stochastic point process; the estimates of the parameters for a branching model of the seismic process are obtained by a maximum-likelihood procedure. After applying magnitude—time and magnitude—distance scaling, the pattern of relationship among earthquakes of different magnitude ranges is almost identical. The number of foreshocks diminishes as the magnitude difference between the main shock and the foreshocks increases, while the magnitude distribution of aftershocks has the opposite property. The strongest aftershocks are likely to occur at the beginning of the sequence; later they migrate away with velocities of the order of km/day. The sequences which are composed of smaller aftershocks last longer and there are indications that they remain essentially in the focal region. Foreshocks also appear to migrate, but in this case, toward the main shock. The rate of occurrence of dependent shocks increases as t -1 as the origin time of the main shock is approached, effectively making every earthquake a multi-shock event. This interaction of earthquakes was modelled by a Monte-Carlo simulation technique. The statistical inversion of simulated catalogues was undertaken to derive the information we would be able to retrieve from actual data, as well as possible errors of estimates. The possibility of using these results as a tool for seismic risk prediction is discussed and evaluated.  相似文献   

17.
Crust and upper mantle structure of the central Iberian Meseta (Spain)   总被引：2，自引：0，他引：2  
Summary. Quarry blasts recorded along three lines on the central Iberian Meseta are used in an attempt to interpret the crustal structure. The results of the interpretation of the data, together with published surface wave and earthquake data, suggest a layered structure of the crust having the following features: the basement, in some areas covered by up to 4 km of sediments, has a P -velocity of 6.1 km s−1; a low-velocity layer, between 7 and 11 km depth, seems to exist on the basis of both P and S interpretation of seismic data; a thick middle crust of 12 km has a P -velocity of 6.4 km s−1 and overlies a lower crust with a mean P -velocity of 6.9 km s−1 and a possible slight negative gradient; the mean v p/ v s ratio for the crust is about 1.75; the Moho is reached at about 31 km depth and consists of a transition zone at least 1.5 km thick. The P -velocity of the upper mantle is close to 8.1 km s−1 and the S -velocity about 4.5 km s−1, which gives a v p /v s ratio of 1.8 for the uppermost mantle. A tentative petrological interpretation of the velocities and composition of the layers is given.  相似文献   

18.
An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.  相似文献   

19.
Summary Recordings from a crustal seismic experiment, which was conducted in the Yellowknife area in 1966, were used for calibration of the Yellow-knife seismic array. In the immediate vicinity of the array the crust is found to be very uniform. A superficial layer with an intercept time of 0–172 ± 0–012s and unknown velocity is underlain by a crust with a P wave velocity of 6.04 ± 0–01 km s-1 near the top: assuming this velocity constant throughout the second layer, the total thickness of the crust is about 34 ± 2 km. The Mohorovicic discontinuity is horizontal under the array within the resolution of this experiment and the apparent Pn velocity is 8.15 km s-1. At a distance of a few tens of kilometres the crustal uniformity breaks down. The distances are such that, for most teleseismic signals, the effect of these in homogeneities should be negligible.  相似文献   

20.
We combine Global Positioning System (GPS) measurements with forward modelling of viscoelastic relaxation and after-slip to study the post-seismic deformation of the 1997 Umbria-Marche (Central Apennines) moderate shallow earthquake sequence. Campaign GPS measurements spanning the time period 1999–2003 are depicting a clear post-seismic deformation signal. Our results favour a normal faulting rupture model where most of the slip is located in the lower part of the seismogenic upper crust, consistent with the rupture models obtained from the inversion of strong motion data. The preferred rheological model, obtained from viscoelastic relaxation modelling, consists of an elastic upper crust, underlain by a transition zone with a viscosity of 1018 Pa s, while the rheology of deeper layers is not relevant for the observed time-span. Shallow fault creep and after-slip at the base of the seismogenic upper crust are the first order processes behind the observed post-seismic deformation. The deep after-slip, below the fault zone at about 8 km depth, acting as a basal shear through localized time-dependent deformation, identifies a rheological discontinuity decoupling the seismogenic upper crust from the low-viscosity transition zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号