首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Lesser Himalaya in central Nepal consists of Precambrian to early Paleozoic, low- to medium-grade metamorphic rocks of the Nawakot Complex, unconformably overlain by the Upper Carboniferous to Lower Miocene Tansen Group. It is divided tectonically into a Parautochthon, two thrust sheets (Thrust sheets I and II), and a wide shear zone (Main Central Thrust zone) from south to north by the Bari Gad–Kali Gandaki Fault, the Phalebas Thrust and the Lower Main Central Thrust, respectively. The Lesser Himalaya is overthrust by the Higher Himalaya along the Upper Main Central Thrust (UMCT). The Lesser Himalaya forms a foreland-propagating duplex structure, each tectonic unit being a horse bounded by imbricate faults. The UMCT and the Main Boundary Thrust are the roof and floor thrusts, respectively. The duplex is cut-off by an out-of-sequence fault. At least five phases of deformation (D1–D5) are recognized in the Lesser Himalaya, two of which (D1 and D2) belong to the pre-Himalayan (pre-Tertiary) orogeny. Petrographic, microprobe and illite crystallinity data show polymetamorphic evolution of the Lesser and Higher Himalayas in central Nepal. The Lesser Himalaya suffered a pre-Himalayan (probably early Paleozoic) anchizonal prograde metamorphism (M0) and a Neohimalayan (syn- to post-UMCT) diagenetic to garnet grade prograde inverted metamorphism (M2). The Higher Himalaya suffered an Eohimalayan (pre or early-UMCT) kyanite-grade prograde metamorphism (M1) which was, in turn, overprinted by Neohimalayan (syn-UMCT) retrograde metamorphism (M2). The isograd inversion from garnet zone in the Lesser Himalaya to kyanite zone in the Higher Himalaya is only apparent due to post-metamorphic thrusting along the UMCT. Both the Lesser and Higher Himalayas have undergone late-stage retrogression (M3) during exhumation.  相似文献   

2.
The hypothesis that abnormal fluid pressure is generated in basins under tectonic compression is tested. The study site, between the Main Karakoram Thrust (MKT), Main Mantle Thrust (MMT), Main Central Thrust (MCT), Main Boundary Thrust (MBT) and Salt Range Thrust (SRT) in northwest Pakistan, is experiencing a tectonic compression of 90 MPa. The Peshawar basin is a broad, oval depression comprising a thick sequence of lacustrine, deltaic and fluvial sediments overlain by loess and alluvial deposits dated at 2.8–0.6 Ma. It is surrounded by the Precambrian and Tertiary intrusive and metamorphic rocks on the north and sedimentary rocks of Paleogene and Neogene to the south. The basin was divided into four hydrostratigraphic units for numerical simulations using the three-dimensional finite-element model FEMWATER within groundwater modeling system (GMS) ver. 5.1. Simulated pressure head data have been compared with the field measurements of hydraulic heads. Transient simulations indicate that topography alone is not sufficient to induce the pressure heads observed in the field, generating consistently positive residuals 0.98–2.90 m over the topography-driven flow. The residuals disappeared after inclusion of the elastic properties of the four hydrostratigraphic units in the model, suggesting the effect of tectonic compression.  相似文献   

3.
The series of four different, steeply inclined thrusts which sharply sever the youthful autochthonous Cenozoic sedimentary zone, including the Siwalik, from the mature old Lesser Himalayan subprovince is collectively known as the Main Boundary Thrust (MBT). In the proximity of this trust in northwestern and eastern sectors, the parautochtonous Lesser Himalayan sedimentary formations are pushed up and their narrow frontal parts split into imbricate sheets with attendant repetition and inversion of lithostratigraphic units. The superficially steeper thrust plane seems to flatten out at depth. The MBT is tectonically and seismically very active at the present time.The Main Central Thrust (MCT), inclined 30° to 45° northwards, constitutes the real boundary between the Lesser and Great Himalaya. Marking an abrubt change in the style and orientation of structures and in the grade of metamorphism from lower amphibolitefacies of the Lesser Himalayan to higher metamorphic facies of the Great Himalayan, the redefined Main Central Thrust lies at a higher level as that originally recognized by A. Heim and A. Gansser. They had recognized this thrust as the contact of the mesozonal metamorphics against the underlying sedimentaries or epimetamorphics. It has now been redesignated as the Munsiari Thrust in Kumaun. It extends northwest in Himachal as the Jutogh Thrust and farther in Kashmir as the Panjal Thrust. In the eastern Himalaya the equivalents of the Munsiari Thrust are known as the Paro Thrust and the Bomdila Thrust. The upper thrust surface in Nepal is recognized as the Main Central Thrust by French and Japanese workers. The easterly extension of the MCT is known as the Khumbu Thrust in eastern Nepal, the Darjeeling Thrust in the Darjeeling-Sikkim region, the Thimpu Thrust in Bhutan and the Sela Thrust in western Arunachal. Significantly, hot springs occur in close proximity to this thrust in Kumaun, Nepal and Bhutan. There are reasons to believe that movement is taking place along the MCT, although seismically it is less active than the MBT.  相似文献   

4.
The geology of Kumaun Lesser Himalaya falls within three main tectonic units, viz the Almora Nappe, Inner Krol Nappe and the Outer Krol Nappe, and the three units comprising the entire succession occur in five distinct zones or belts. The stratigraphy of the area has been revised on the basis of the occurrences of chloritic horizons (spilites) and also the existence of an unconformity at the base of Loharkhet/Bageshwar/Ganai/Bhimtal Formation. This paper describes briefly the lithological and structural characters of the rocks of the five belts and the observations are synthesized to present an integrated picture of the regional stratigraphic framework for the metasediments lying between the Main Central Thrust and the Main Boundary Thrust/Fault which define the tectonic boundaries of the Lesser Himalaya in Kumaun.  相似文献   

5.
DEFORMATIONAL AND METAMORPHIC HISTORY OF THE CENTRAL LONGMEN MOUNTAINS, SICHUAN CHINA1　ArneDC ,WorleyBA ,WilsonCJL ,etal.Differentialexhumationinresponsetoepisodicthrustingalongtheeasternmar ginoftheTibetanPlateau[J] .Tectonophysics,1997,2 80 :2 39～ 2 56 . 2　ChenSF ,WilsonCJL ,WorleyBA .TectonictransitionfromtheSongpan GarzeFoldBelttotheSichuanBasin,south westernChina[J] .BasinResearch ,1995,7:2 35～ 2 53. 3　ChenSF ,WilsonCJL .Emplaceme…  相似文献   

6.
MAIN CENTRAL THRUST ZONE IN THE KATHMANDU AREA, CENTRAL NEPAL, AND ITS TECTONIC SIGNIFICANCE1　AritaK ,LallmeyerRD ,TakasuA .TectonothermalevolutionoftheLesserHimalaya ,Nepal:constraintsfrom 4 0 Ar/3 9AragesfromtheKathmandunappe[J].TheIslandArc ,1997,6 :372～ 384. 2　RaiSM ,GuillotS ,LeFortP ,etal.Pressure temperatureevolutionintheKathmanduandGosainkundregions ,CentralNepal[J].JourAsianEarthSci ,1998,16 :2 83～ 2 98. 3　SchellingD ,KArita .…  相似文献   

7.

From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation.  相似文献   

8.
Paleotemperature indicators and apatite fission track analysis of Australian continental margin cover sequences accreted to the active Banda arc–continent collision indicate little to no heating during rapid late Neogene uplift and exhumation. Thermal maturation patterns of vitrinite reflectance, conodont alteration and illite crystallinity show that peak paleotemperatures (PPT) increase with stratigraphic and structural burial. The highest PPT is found in the northern hinterland of the accretionary wedge, which was beneath progressively thicker parts of the upper plate towards the north. Major discontinuities in the pattern of PPT are associated with the position of major thrust ramps such as those forming the Ramelau/Kekneno Arch (RKA). PPT for Upper Triassic to Neogene strata south of the RKA are 60–80°C, which are similar to, and in many cases lower than, correlative and age equivalent units drilled on the NW Australian Shelf. Permian to Lower Triassic sedimentary strata thrust over younger units within and north of the RKA have PPT of 100–220°C. Thrust sheets accreted beneath the upper plate have PPT approximately 90°C higher than those frontally accreted. Metamorphism of the northernmost units of these sequences yield PPT of >300°C. Thrust stacking yields an inverted thermal profile of PPT decreasing discontinuously downward and to the south (towards the foreland). The timing of PPT is constrained by apatite fission track ages from mostly Triassic continental margin cover sequences. Ages of Upper Triassic units are primarily coeval with deposition and show little evidence of thermal annealing, whereas those of Lower Triassic units are almost completely annealed and range from 1.8±0.5–19.2±9.7 Ma. The clustering of apatite fission track ages into two distinct groups indicates that the upper boundary of the partial annealing zone has remained for some time at a Triassic stratigraphic interval in the slope and rise of the NW Australian continental margin. The position of this zone on the present shelf is higher in the stratigraphic column due to the greater thickness of post-breakup shelf facies units. Thrust stacking of rise, slope and shelf units produces an inverted vertical profile of increasing apatite fission track age with depth. Lack of any long confined track lengths in apatite from all of the units requires rapid and recent exhumation of the thrust stack, which is coincident with rapid phases of Pliocene–Pleistocene exhumation documented throughout Timor. These data preclude pre-Late Miocene tectonic burial or pre-Pliocene exhumation of the NW Australian continental margin.  相似文献   

9.
The Main Central Thrust demarcates the boundary between the Lesser Himalaya and the Higher Himalaya in the Himalayan orogen. Several definitions of the Main Central Thrust have been proposed since it was originally described as the southern boundary of the crystalline rocks (the Main Central Thrust mass) in the Kumaun-Garhwal Himalaya. The long-held contention that the Munsiari Thrust represents the Main Central Thrust has been negated by recent isotopic studies. One way to define the Main Central Thrust is that it is a ductile shear zone that is delimited by the Munsiari Thrust (MCT-I) in south and the Vaikrita Thrust (MCT-II) in north. The alternative proposition that the Vaikrita Thrust represents the Main Central Thrust is fraught with practical limitations in many parts of the Himalaya, including the study area. In the metamorphic rocks bounded between the Vaikrita Thrust and the Munsiari Thrust, the isoclinal folds of the earliest phase are routinely ascribed to the pre-Himalayan orogeny, whereas all subsequent folding phases are attributed to the Himalayan orogeny. This article elucidates the structural characteristics of the kilometre-thick Munsiari Thrust Zone and revisits the issue of pre-Himalayan orogenic signatures in the thrust zone. With the help of high-resolution field mapping and the analyses of mesoscopic scale structures, we demonstrate that the Munsiari Thrust is a typical fault zone that is made up of a fault core and two damage zones. The fault core traces the boundary between the quartzite and the biotite-gneiss. The damage zones consist of the low-grade metasedimentary rocks in the footwall and the gneiss-migmatite in the hanging wall. The entire fault zone shares an essentially common history of progressive ductile shearing. Successively developed mesoscopic folds trace various stages of progressive ductile shearing in the damage zones. Two recognizable stages of the shearing are represented by the early isoclinal folds and the late kink folds. As the strain during progressive deformation achieved the levels that were too high for accommodation by ductile flow, it was released by development of a tectonic dislocation along a mechanically weak boundary, the Munsiari Thrust. The isoclinal folds and the Munsiari Thrust were developed at different stages of a common progressive deformation during the Himalayan orogeny. Contrary to the popular notion of consistency with respect to orientation, the stretching lineations show large directional variability due to distortion during the late folding.  相似文献   

10.
Crustal architecture of the Himalayan metamorphic front in eastern Nepal   总被引：4，自引：0，他引：4  
The Himalayan Metamorphic Front consists of two basinal sequences deposited on the Indian passive margin, the Mesoproterozoic Lesser Himalayan Sequence and the Neoproterozoic–Cambrian Greater Himalayan Sequence. The current paradigm is that the unconformity between these two basinal sequences coincides with a crustal-scale thrust that has been called the Main Central Thrust, and that this acted as the fundamental structure that controlled the architecture of the Himalayan Metamorphic Front. Geological mapping of eastern Nepal and eight detailed stratigraphic, kinematic, strain and metamorphic profiles through the Himalayan Metamorphic Front define the crustal architecture. In eastern Nepal the unconformity does not coincide with a discrete structural or metamorphic discontinuity and is not a discrete high strain zone. In recognition of this, we introduce the term Himalayan Unconformity to distinguish it from high strain zones in the Himalayan Metamorphic Front. The fundamental structure that controls orogen architecture in eastern Nepal occurs at higher structural levels within the Greater Himalayan Sequence and we suggest the name; High Himal Thrust. This 100–400 m thick mylonite zone marks a sharp deformation discontinuity associated with a steep metamorphic transition, and separates the Upper-Plate from the Lower-Plate in the Himalayan Metamorphic Front. The high-T/moderate-P metamorphism at  20–24 Ma in the Upper-Plate reflects extrusion of material between the High Himal Thrust and the South Tibet Detachment System at the top of the section. The Lower-Plate is a broad schistose zone of inverted, diachronous moderate-T/high-P metamorphic rocks formed between  18 and 6 Ma. The High Himal Thrust is laterally continuous into Sikkim and Bhutan where it also occurs at higher structural levels than the Himalayan Unconformity and Main Central Thrust (as originally defined). To the west in central Nepal, the Upper-Plate/Lower-Plate boundary has been placed at lower structural levels, coinciding with the Himalayan Unconformity and has been named the Main Central Thrust, above the originally defined Main Central Thrust (or Ramgarh Thrust).  相似文献   

11.
The crustal architecture of the Southern Urals is dominated by an orogenic wedge thrusted westward upon the subducted East European continental margin. The N–S trending wedge constitutes an antiformal stack composed mainly of the high-P Maksyutov Complex, the overlying Suvanyak Complex and the allochthonous synformal Zilair flysch further west. These tectono-metamorphic units are separated by tectonic contacts and record discontinously decreasing metamorphic conditions from bottom to top. In the east, the E-dipping Main Uralian Normal Fault cross-cuts the metamorphic footwall and juxtaposes the non metamorphic Magnitogorsk island arc. This syncollisional normal fault compensated crustal thickening and exhumation of the high-P rocks. Orogenic shortening was accommodated by the Main Uralian Thrust, a W-vergent crustal-scale shear zone at the base of the wedge. Geological investigations and reflection seismics (URSEIS '95) argue in favour of a geodynamic evolution integrating subduction and basal accretion of high-P rocks during sinistral oblique thrusting along the Main Uralian Thrust and coeval normal-faulting along the Main Uralian Normal Fault.  相似文献   

12.
The Siwaliks in the foothills of the Himalayas, containing molasse sediments derived from the rising mountain front, represent a foreland fold-thrust belt which was deformed during the continued northward convergence of the Indian plate following the continent-continent collision. In this contribution we present balanced and restored cross sections along a line from Adampur through Jawalamukhi to Palampur in the foothills of the Punjab and Himachal Himalayas using published surface/subsurface data. The cross section incorporates all the rock units of the Sub-Himalaya Zone as well as that of the northern Lesser Himalaya Zone. The structural geometry of the fold-thrust belt in this section is largely controlled by three buried thrusts within the Sundernagar Formation of the Lesser Himalaya Zone. Two of these buried thrusts splay from the basal detachment and delineate a buried horse. Three thrusts towards foreland, including the Main Frontal Thrust (inferred to be a blind thrust in this sector), splay from these buried thrusts. In the hinterland, an anticlinal fault-bend fold was breached by a sequence of break-back thrusts, one of which is the Main Boundary Thrust. A foreland propagating thrust system is inadequate to explain the evolution of the fold-thrust-belt in this section. We show that a “synchronous thrusting” model in whichin-sequence initiation of thrusts at depth combined with continued motion on all the thrusts leading toout-of-sequence imbrication at the upper structural levels better explains the evolution of the fold-thrust belt in the Jawalamukhi section. The estimated shortening between the two chosen pin lines is about 36% (about 72 km).  相似文献   

13.
In the Lesser Himalayan region of Garhwal, an elongate, NW-SE trending zone of mylonitic rocks is developed along the Singuni Thrust within the metasedimentary formation of the Deoban-Tejam Belt. Detailed petrography of various mylonitic rocks indicates that a quartz and felspar porphyry was emplaced along the Singuni Thrust. This was initially metamorphosed in the almandine-amphibolite facies before profound ruptural or cataclastic and crystalloblastic deformation evolved mylonitic rocks in the green schist facies. Southwesterly dipping foliation and an equally prominent mica lineation plunging in the same direction are developed in these mylonitic rocks. The quartzite is also intensely cataclastically deformed in the green schist facies and is highly schistose with a prominent mica lineation normal to the trace of Singuni Thrust, Uttarkashi Thrust and Main Central Thrust in the ‘a’ direction of tectonic transport. In quartzite and mylonitic rocks, a probable contemporaneous development of the metamorphic and structural elements has been postulated along the Singuni Thrust during large scale tectonic movements. Normally exposed Gamri Quartzite is more metamorphosed near its base along the Singuni Thrust and Uttarkashi Thrust while the intensity of deformation increases near the top of normally exposed quartzite along the Main Central Thrust and, thus, signifying the role of thrusting in cataclastically deforming the rocks and contributing to the phenomenon of widespread reversal of metamorphism in the Lesser Himalaya.  相似文献   

14.
位于中喜马拉雅和巴基斯坦境内西喜马拉雅的两个相互结合的剖面在一级单元、断层中展现出不同的构造形式;并在不同时期,以不同速率发育了二级构造。沿两剖面岩性单元的显著差异显示通常指的圆柱状喜马拉雅带并没有越过喀喇昆仑山断层。与此同时,在近来许多区域研究中显示出来的构造轮廓强调主中央逆冲断层是一个貌似与中喜马拉雅断层带和越过西部山脉的西喜马拉雅断层带有联系的独立部分。上述两个地区展现出不同的碰撞历史。这些不同之处揭示喀喇昆仑山断层是西部岛弧保留造山带与东部岛弧俯冲造山带之间转移/转换断层的再活动或衍变。  相似文献   

15.
位于巴基斯坦北部西喜马拉雅的科希斯坦地体为夹持于亚洲板块与印度板块之间的倾斜的岛弧型壳体。科希斯坦岛弧北界为主地幔逆总断层（MMT），北界为北部缝合带（或喀啦昆仑主逆冲断层，MKT），可将其划分为几个地质单元。奇拉斯（Chilas)杂岩体为一长约300km、宽50km的巨型基性侵入岩体，与MMT和MKT近平行展布。它被认为是科希斯坦岛弧的岩浆房根区。奇拉斯杂岩体主要由辉长苏长岩和几个超镁铁质岩－镁铁质岩（简称UMA）岩体组成。前侵入后之中。奇拉斯杂岩体岩石普遍发生轻微变形，出现叶理化和韧性剪切带。UMA主要由橄榄石（含或不含单斜辉石）堆积岩（纯橄岩，异剥橄岩）和斜长石－单斜辉石－斜方辉石堆积岩（二辉辉长岩）组成，含有少量单斜辉石－斜方辉石堆积岩（辉石岩）。辉长苏长岩的地球化学特征表明其为岛弧环境下形成的非堆积岩，而UMA的地球化学特征表明其为岛弧环境下的堆积岩。辉长苏长岩和UMA的主元素地球化学特征在AFM图解上可用堆积和非堆积的模式来解释，辉长苏长岩的稀土和微量元素地球化学特征在100MgO/(MgO TFeO)图解上显示岛弧型特点，且UMA表明其堆积特性。  相似文献   

16.
开合构造是一种全球构造假说,该假说基础为地球上的一切物质和地质体都存在开合表现;可以用开合构造观解释一些板块构造理论登陆后不能合理解释的地质现象。文章在结合前人基础地质资料基础上,分析藏南地区基本的构造单元划分;强调动态构造单元划分,提出了被重力拆离断层改造叠加的逆断层区以及被拆离断层改造的正断层区。在主流观点提出碰撞挤压造山形成青藏高原时,野外科学考察发现了绒布寺伸展正断层的存在。文章认为绒布寺伸展正断层与主中央逆冲断层形成时间比藏南拆离系要早,两者构成了藏南挤出构造的两个边界;而藏南拆离系是晚期形成的,局部叠加在主中央逆冲断层之上,并且珠峰北追踪了早期绒布寺正断层呈相对高角度产出。3条断裂构造系统是不同时期、不同构造背景下的产物。藏南由前人所划分的飞来峰、构造窗等逆冲推覆构造系统中的构造单元,往往挤压逆冲特征表现不明显,却表现出由新的地层覆盖在老地层之上而显示地层柱缺失的特征。文章认为这些是滑覆构造的表现,是藏南地区晚期重力滑覆作用的产物。用开合构造理论将该地区新生代构造演化划分为由开转换为合;然后由合转换为开,构成一个完整开合演化历史,在这多阶段构造演化过程中,地球深部的热能、地球内部的重力势能以及构造引起的附加应力能起到关键作用。  相似文献   

17.
Geochemical compositions of mafic igneous rocks in the Katangan basin in Central Africa (Democratic Republic of Congo, hereafter Congo, and Zambia) provide the basis for the geodynamic interpretation of the evolution of this Neoproterozoic basin located between the Congo and Kalahari cratons. The Katangan basin is subdivided into five major tectonic units: the Katangan Aulacogen, the External Fold and Thrust Belt, the Domes Region, the Synclinorial Belt and the Katangan High. The metamorphosed mafic igneous rocks investigated occur in the Katangan Aulacogen, the External Fold and Thrust Belt and the Domes Region. The earliest magmatic activity produced continental tholeiites emplaced on Paleoproterozoic crust during the early stages of intraplate break-up. This continental tholeiite magmatism was followed by an association of alkaline and tholeiitic basalts emplaced in the Katangan continental rift and then by tholeiitic basalts with E-MORB affinity marking a young oceanic crust. These volcanic associations mark different stages of evolution from pre-rift continental break-up up to a continental rift similar to the East African rift system and then to a Red Sea type incipient oceanic rift. A similar evolution occurs in the Damaran basin in southwestern Africa, although no pre-rift continental tholeiites have been recorded in this segment of the Pan-African belt system.  相似文献   

18.
Shah  A. A.  Talha Qadri  S. M. 《Natural Hazards》2017,87(2):1245-1249
Natural Hazards - Mridula et al. (Nat Hazards 84:383–403, (2016) have tried to identify segments of two major thrust faults, the Main Boundary Thrust and Main Central Thrust, in Western...  相似文献   

19.
The Madenkoy-Siir region lies in southeastern Anatolia, Turkey to the northeast of Siirt. The study area is in the southeastern Anatolian Thrust Belt, which forms the boundary between the Border Folds on the northern edge of the Arabian plate and the Taurids. In the region, limestones of the Midyat Group of Eocene-Miocene age and alternating marls and sandstones of the Lice Formation of Early-Middle Miocene age are the autochthonous units. Three thrust slices were emplaced over the autochthonous units during the Miocene Epoch. The lowest slice consists of interbedded sandstones, mudstones, marls, limestones, and conglomerates of the Sason flysch, the Madenkoy spilite, and the Toptepe conglomerate, all of Eocene age; the middle slice consists of the Guleman ultramafic rocks of Cretaceous age; and the uppermost slice consists of the Bitlis metamorphic rocks of Paleozoic age.  相似文献   

20.
Inverted metamorphism in the Himalayas is closely associated with the Main Central Thrust (MCT). In the western Himalayas, the Main Central Thrust conventionally separates high grade metamorphic rocks of the Higher Himalayan Crystalline Sequence (HHCS) from unmetamorphosed rocks of the Inner sedimentary Belt. In the eastern Himalayas, the Inner sedimentary Belt is absent, and the HHCS and meta-sedimentary Lesser Himalayan Sequence (LHS) apparently form a continuous Barrovian metamorphic sequence, leading to confusion about the precise location of the MCT. In this study, it is demonstrated that migmatitic gneisses of the sillimanite zone in the higher structural levels of the HHCS are multiply deformed, with two phases of penetrative fabric formation (S1HHCS and S2HHCS) followed by third folding event associated with a spaced, NW-SE trending, north-east dipping foliation (S3HHCS). The underlying LHS schists (kyanite zone and lower) are also multiply deformed, with the bedding S0 being isoclinally folded (F1LHS), and subsequently refolded (F2LHS and F3LHS). The contact zone between the HHCS and LHS is characterized by ductile, top-to-the southwest shearing and stabilization of a pervasive foliation that is consistently oriented NW-SE and dips northeast. This foliation is parallel to the S3HHCS foliation in the HHCS, and the S2LHS in the LHS. Early lineations in the HHCS and LHS also show different dispersions across the contact shear zone, implying that pre-thrusting orientations of the two units were distinct. The contact shear zone is therefore interpreted to be a plane of structural discordance, shows a shear sense consistent with thrust movement and is associated with mineral growth during Barrovian metamorphism. It may well be considered to represent the MCT in this region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号