首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 265 毫秒
1.
1 INTRODUCTIONCoronal majss ejections (CMEs) are often seen as spectacular eruptions of matter fromthe Sun which propagate outward through the heliosphere and often interact with the Earth'smagnetosphere (Hundhausen, 1997; Gosling, 1997; and references herein). It is well known thatthese interactions can have substalltial consequences on the geomagnetic environment of theEarth, sometimes resulting in damage to satellites (e.g., McAllister et al., 1996; Berdichevskyet al., 1998). CMEs…  相似文献   

2.
T. Mrozek 《Solar physics》2011,270(1):191-203
We present observations of a failed eruption of a magnetic flux rope recorded during the M6.2 flare of 14 July 2004. The observations were mainly made with TRACE 171 Å and 1600 Å filters. The flare was accompanied by a destabilization of a magnetic structure observed as a filament eruption. After an initial acceleration, the eruption slowed down and finally was stopped by the overlying coronal loops. The observations suggest that the whole event is well described by the quadrupole model of a solar flare. The failed eruption stretched the overlying loops, and they were then observed to be oscillating. We were able to observe clear vertical polarization of the oscillatory motion in the TRACE images. The derived parameters of the oscillatory motion are an initial amplitude of 9520 km, a period of 377 s, and an exponential damping time of 500 s. Differences between the existing models and the observations have been found. The analyzed event is the second sample for global vertical kink waves found besides the first by Wang and Solanki (Astrophys. J. Lett. 421, 33, 2004).  相似文献   

3.
The spectacular prominence eruption and CME of 31 August 2007 are analyzed stereoscopically using data from NASA??s twin Solar Terrestrial Relations Observatory (STEREO) spacecraft. The technique of tie pointing and triangulation (T&T) is used to reconstruct the prominence (or filament when seen on the disk) before and during the eruption. For the first time, a filament barb is reconstructed in three-dimensions, confirming that the barb connects the filament spine to the solar surface. The chirality of the filament system is determined from the barb and magnetogram and confirmed by the skew of the loops of the post-eruptive arcade relative to the polarity reversal boundary below. The T&T analysis shows that the filament rotates as it erupts in the direction expected for a filament system of the given chirality. While the prominence begins to rotate in the slow-rise phase, most of the rotation occurs during the fast-rise phase, after formation of the CME begins. The stereoscopic analysis also allows us to analyze the spatial relationships among various features of the eruption including the pre-eruptive filament, the flare ribbons, the erupting prominence, and the cavity of the coronal mass ejection (CME). We find that erupting prominence strands and the CME have different (non-radial) trajectories; we relate the trajectories to the structure of the coronal magnetic fields. The possible cause of the eruption is also discussed.  相似文献   

4.
Using multiwavelength observations from the Solar Dynamics Observatory (SDO) and the Solar Terrestrial Relations Observatory (STEREO), we investigate the mechanism of two successive eruptions (F1 and F2) of a filament in active region NOAA 11444 on 27 March 2012. The filament was inverse J-shaped and lay along a quasi-circular polarity inversion line (PIL). The first part of the filament erupted at \(\sim2{:}30\) UT on 27 March 2012 (F1), the second part at around 4:20 UT on the same day (F2). A precursor or preflare brightening was observed below the filament main axis about 30 min before F1. The brightening was followed by a jet-like ejection below the filament, which triggered its eruption. Before the eruption of F2, the filament seemed to be trapped within the overlying arcade loops for almost 1.5 h before it successfully erupted. Interestingly, we observe simultaneously contraction (\(\sim12~\mbox{km}\,\mbox{s}^{-1}\)) and expansion (\(\sim20~\mbox{km}\,\mbox{s}^{-1}\)) of arcade loops in the active region before F2. Magnetograms obtained with the Helioseismic and Magnetic Imager (HMI) show converging motion of the opposite polarities, which result in flux cancellation near the PIL. We suggest that flux cancellation at the PIL resulted in a jet-like ejection below the filament main axis, which triggered F1, similar to the tether-cutting process. F2 was triggered by removal of the overlying arcade loops via reconnection. Both filament eruptions produced high-speed (\(\sim1000~\mbox{km}\,\mbox{s}^{-1}\)) coronal mass ejections.  相似文献   

5.
By means of Hα, EUV, soft X-ray, hard X-ray, and photospheric magnetic field observations, we report the surge-like eruption of a small-scale filament, called “blowout surge” according to recent observations, occurring on a plage region around AR 10876 on 1 May 2006. Along magnetic polarity reversal boundaries with obvious magnetic cancelations, the filament was located underneath a compact coronal arcade and close to one end of large coronal loops around the AR’s periphery. The filament started to erupt about 8 min before the main impulsive phase of a small two-ribbon flare, which had two Hα blue-wing kernels connected by hard X-ray loop-top sources on the both sides of the filament. After the flare end, the filament further underwent a distant eruption following a path nearly along the preexisting large loops, and thus looked like an Hα surge and an EUV jet. During the eruption, a small coronal dimming was formed near the flare, while weak brightenings appeared around the remote end of the large loops. We interpret these joint observations as the filament eruption being confined and guided by the large loops. The filament eruption, initially embedded in one footpoint region of the large loops, can break away from the magnetic restraint of the overlying compact arcade, but might be still limited inside the large loops. As a result, the eruption took a surge form that can only expand laterally along the large loops rather than erupt radially.  相似文献   

6.
Researchers have reported i) correlations of coronal mass ejection (CME) speeds and the total photospheric magnetic flux swept out by flare ribbons in flare-associated eruptive events, and, separately, ii) correlations of CME speeds and more rapid decay, with height, of magnetic fields in potential-field coronal models above eruption sites. Here, we compare the roles of both ribbon fluxes and the decay rates of overlying fields in a set of 16 eruptive events. We confirm previous results that higher CME speeds are associated with both higher ribbon fluxes and more rapidly decaying overlying fields. We find the association with ribbon fluxes to be weaker than a previous report, but stronger than the dependence on the decay rate of overlying fields. Since the photospheric ribbon flux is thought to approximate the amount of coronal magnetic flux reconnected during the event, the correlation of speeds with ribbon fluxes suggests that reconnection plays some role in accelerating CMEs. One possibility is that reconnected fields that wrap around the rising ejection produce an increased outward hoop force, thereby increasing CME acceleration. The correlation of CME speeds with more rapidly decaying overlying fields might be caused by greater downward magnetic tension in stronger overlying fields, which could act as a source of drag on rising ejections.  相似文献   

7.
This is the first of four companion papers, which comprehensively analyze a complex eruptive event of 18 November 2003 in active region (AR) 10501 and the causes of the largest Solar Cycle 23 geomagnetic storm on 20 November 2003. Analysis of a complete data set, not considered before, reveals a chain of eruptions to which hard X-ray and microwave bursts responded. A filament in AR 10501 was not a passive part of a larger flux rope, as usually considered. The filament erupted and gave origin to a coronal mass ejection (CME). The chain of events was as follows: i) a presumable eruption at 07:29 UT accompanied by a not reported M1.2 class flare probably associated with the onset of a first southeastern CME (CME1), which most likely is not responsible for the superstorm; ii) a confined eruption (without a CME) at 07:41 UT (M3.2 flare) that destabilized the large filament; iii) the filament acceleration around 07:56 UT; iv) the bifurcation of the eruptive filament that transformed into a large “cloud”; v) an M3.9 flare in AR 10501 associated to this transformation. The transformation of the filament could be due to the interaction of the eruptive filament with the magnetic field in the neighborhood of a null point, located at a height of about 100 Mm above the complex formed by ARs 10501, 10503, and their environment. The CORONAS-F/SPIRIT telescope observed the cloud in 304 Å as a large Y-shaped darkening, which moved from the bifurcation region across the solar disk to the limb. The masses and kinematics of the cloud and the filament were similar. Remnants of the filament were not clearly observed in the second southwestern CME (CME2), previously regarded as a source of the 20 November geomagnetic storm. These facts do not support a simple scenario, in which the interplanetary magnetic cloud is considered as a flux rope formed from a structure initially associated with the pre-eruption filament in AR 10501. Observations suggest a possible additional eruption above the bifurcation region close to solar disk center between 08:07 and 08:17 UT, which could be the source of the 20 November superstorm.  相似文献   

8.
J. Yang  Y. Jiang  B. Yang  R. Zheng  D. Yang  J. Hong  H. Li  Y. Bi 《Solar physics》2012,279(1):115-126
We will present detailed observations of the asymmetrical eruption of a large quiescent filament on 24 November 2002, which was followed by a two-ribbon flare, three coronal dimmings, endpoint brightenings, and a very fast halo-type coronal mass ejection (CME). Before the eruption, the filament lay along the main neutral line (MNL) underneath a single-arcade helmet streamer with a simple bipolar configuration. However, photospheric magnetic fields on both sides of the filament showed an asymmetrical distribution, and the filament and MNL were not located just at the center of the streamer base but were closer to the eastern leg of the streamer arcade. Therefore, instead of erupting along the streamer’s symmetrical axis, the filament showed a nonradial and asymmetrical eruption. It lifted from the eastern flank of the streamer arcade to impact the western leg directly, leading to an asymmetrical CME that expanded westward; eventually the streamer was disrupted significantly. Accordingly, the opposite-polarity coronal dimmings at both sides of the filament forming in the eruption also showed an asymmetrical area distribution. We thus assume that the streamer arcade could guide the filament at the early eruption phase but failed to restrain it later. Consistent with previous results, these observations suggest that the global background magnetic field can impose additional action on the initial eruption of the filament and CME, as well as the dimming configuration.  相似文献   

9.
We present a case study of the 13 July 2004 solar event, in which disturbances caused by eruption of a filament from an active region embraced a quarter of the visible solar surface. Remarkable are the absorption phenomena observed in the SOHO/EIT 304 Å channel, which were also visible in the EIT 195 Å channel, in the Hα line, and even in total radio flux records. Coronal and Moreton waves were also observed. Multispectral data allowed reconstructing an overall picture of the event. An explosive filament eruption and related impulsive flare produced a CME and blast shock, both of which decelerated and propagated independently. Coronal and Moreton waves were kinematically close and both decelerated in accordance with an expected motion of a coronal blast shock. The CME did not resemble a classical three-component structure, probably because some part of the ejected mass fell back onto the Sun. Quantitative evaluations from different observations provide close estimates of the falling mass, ～3×1015?g, which is close to the estimated mass of the CME. The falling material was responsible for the observed large-scale absorption phenomena, in particular, shallow widespread moving dimmings observed at 195 Å. By contrast, deep quasi-stationary dimmings observed in this band near the eruption center were due to plasma density decrease in coronal structures.  相似文献   

10.
A filament eruption, accompanied by a B9.5 flare, coronal dimming, and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5°, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 Å stereoscopic data from about 12 hours before to about 2 hours after the eruption, allowing us to determine the 3D trajectory of the erupting filament. From the 3D reconstructions of the filament and the chromospheric ribbons in the early stage of the eruption, simultaneous heating of both the rising filamentary material and the chromosphere directly below is observed, consistent with an eruption resulting from magnetic reconnection below the filament. Comparisons of the filament during eruption in 304 Å and Hα? show that when it becomes emissive in He II, it tends to disappear in Hα?, indicating that the disappearance probably results from heating or motion, not loss, of filamentary material.  相似文献   

11.
We present a study of a mini-filament erupting in association with a circular ribbon flare observed by NVST and SDO/AIA on 2014 March 17. The filament was located at one footpoint region of a large loops. The potential field extrapolation shows that it was embedded under a magnetic null point configuration. First, we observed a brightening of the filament at the corresponding EUV images, close to one end of the filament. With time evolution, a circular flare ribbon was observed around the filament at the onset of the eruption, which is regarded as a signature of reconnection at the null point. After the filament activation, its eruption took the form of a surge, which ejected along one end of a large-scale closed coronal loops with a curtain-like shape. We conjecture that the null point reconnection may facilitate the eruption of the filament.  相似文献   

12.
By using Hα, He I 10830, EUV and soft X-ray (SXR) data, we examined a filament eruption that occurred on a quiet-sun region near the center of the solar disk on 2006 January 12, which disturbed a sigmoid overlying the filament channel observed by the GOES-12 SXR Imager (SXI), and led to the eruption of the sigmoid. The event was associated with a partial halo coronal mass ejection (CME) observed by the Large Angle and Spectrometric Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory (SOHO), and resulted in the formation of two flare-like ribbons, post-eruption coronal loops, and two transient coronal holes (TCHs), but there were no significantly recorded GOES or Hα flares corresponding to the eruption. The two TCHs were dominated by opposite magnetic polarities and were located on the two ends of the eruptive sigmoid. They showed similar locations and shapes in He Ⅰ 10830, EUV and SXR observations. During the early eruption phase, brightenings first appeared on the locations of the two subsequent TCHs, which could be clearly identified on He Ⅰ 10830, EUV and SXR images. This eruption could be explained by the magnetic flux rope model, and the two TCHs were likely to be the feet of the flux rope.  相似文献   

13.
We analyze multiwavelength observations of an M2.9/1N flare that occurred in AR NOAA 11112 on 16 October 2010. AIA 211 Å EUV images reveal the presence of a faster coronal wave (decelerating from ≈?1390 to ≈?830 km?s?1) propagating ahead of a slower wave (decelerating from ≈?416 to ≈?166 km?s?1) towards the western limb. The dynamic radio spectrum from Sagamore Hill radio telescope shows the presence of a metric type II radio burst, which reveals the presence of a coronal shock wave (speed ≈?800 km?s?1). The speed of the faster coronal wave, derived from AIA 211 Å images, is found to be comparable to the coronal shock speed. AIA 171 Å high-cadence observations showed that a coronal loop, which was located at a distance of ≈?0.32R ⊙ to the west of the flaring region, started to oscillate by the end of the impulsive phase of the flare. The results indicate that the faster coronal wave may be the first driver of the transversal oscillations of coronal loop. As the slower wave passed through the coronal loop, the oscillations became even stronger. There was a plasmoid eruption observed in EUV and a white-light CME was recorded, having velocity of ≈?340?–?350 km?s?1. STEREO 195 Å images show an EIT wave, propagating in the same direction as the lower-speed coronal wave observed in AIA, but decelerating from ≈?320 to ≈?254 km?s?1. These observations reveal the co-existence of both waves (i.e. coronal Moreton and EIT waves), and the type II radio burst seems to be associated with the coronal Moreton wave.  相似文献   

14.
We analyze the relationship between the dynamics of the coronal mass ejection (CME) of 15 May 2001 and the energy release in the associated flare. The flare took place behind the east limb and was disclosed by a growing system of hot soft X-ray (SXR) loops that appeared from behind the limb around the onset of the rapid acceleration of the CME. The highly correlated behavior of the SXR light-curve derivative and the time profile of the CME acceleration reveals an intrinsic relationship between the CME dynamics and the flare energy release. Furthermore, we found that the CME acceleration peak occurs simultaneously with the fastest growth (100 km s-1) of X-ray loops, indicating that the reconnection plays an essential role in the eruption. Inspecting the CME/flare morphology we recognized in the Yohkoh-SXT images an oval feature that formed within the rising structure at the onset of the rapid acceleration phase, simultaneously with the appearance of the X-ray loops. The eruptive prominence was imbedded within the lower half of the oval, suggestive of a flux-rope/prominence magnetic configuration. We interpret the observed morphological evolution in terms of a reconnection process in the current sheet that presumably formed below the erupting flux-rope at the onset of the CME acceleration. Measurements of the tip-height of the cusped X-ray loop system and the height of the lower edge of the oval, enable us to trace the stretching of the current sheet. The initial distance between the oval and the loops amounted to 35 – 40 Mm. In about 1 h the inferred length of the current sheet increased to 150 – 200 Mm, which corresponds to a mean elongation speed of 35 – 45 km s-1. The results are discussed in the framework of CME models that include the magnetic reconnection below the erupting flux-rope.  相似文献   

15.
Images of an east-limb flare on 3 November 2010 taken in the 131 Å channel of the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory provide a convincing example of a long current sheet below an erupting plasmoid, as predicted by the standard magnetic reconnection model of eruptive flares. However, the 171 Å and 193 Å channel images hint at an alternative scenario. These images reveal that large-scale waves with velocity greater than 1000 km?s?1 propagated alongside and ahead of the erupting plasmoid. Just south of the plasmoid, the waves coincided with type-II radio emission, and to the north, where the waves propagated along plume-like structures, there was increased decimetric emission. Initially, the cavity around the hot plasmoid expanded. Later, when the erupting plasmoid reached the height of an overlying arcade system, the plasmoid structure changed, and the lower parts of the cavity collapsed inwards. Hot loops appeared alongside and below the erupting plasmoid. We consider a scenario in which the fast waves and the type-II emission were a consequence of a flare blast wave, and the cavity collapse and the hot loops resulted from the break-out of the flux rope through an overlying coronal arcade.  相似文献   

16.
By using the multi-wavelength observations from the Solar Terrestrial Relations Observatory (STEREO), the Solar and Heliospheric Observatory (SOHO), the Transition Region and Coronal Explorer (TRACE) and the HINODE, we study a coronal mass ejection (CME) and associated coronal dimming occurred on 2009 December 13, as a consequence of the expansion and eruption of EUV loops. The activities were probably triggered by the new flux emergence and the convergence motions, which were evident in the magnetograms from Michelson Doppler Imager (MDI) on the SOHO. The emergence led to the destabilization and eruption of the preexistent flux rope, which was highly-sheared over the polarity inversion line. Driven by the ejection of the flux rope, the overlying loops initially slowly rose and then erupted. As a result, two coronal dimming regions formed at the footprints of the loops and a B1.9 flare, about half an hour later, occurred in the eruptive region near one foot of the eruptive loops. The CME had a very close temporal and spatial relationship to the expanding loops, and it is very likely that the CME directly developed from the eruptive loops. The CME mass calculated from the EUV dimming was of the same order of the typical CME mass, suggesting that the dimming region supplied major of the mass for the CME. The kinematic evolution of the CME was basically consistent with the three-phases scenario: the initiation phase, impulsive acceleration phase, and propagation phase. The onset of the CME could be well explained by the emerging flux trigger mechanism.  相似文献   

17.
In this article, we present a multi-wavelength and multi-instrument investigation of a halo coronal mass ejection (CME) from active region NOAA 12371 on 21 June 2015 that led to a major geomagnetic storm of minimum \(\mathrm{Dst} = -204\) nT. The observations from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory in the hot EUV channel of 94 Å confirm the CME to be associated with a coronal sigmoid that displayed an intense emission (\(T \sim6\) MK) from its core before the onset of the eruption. Multi-wavelength observations of the source active region suggest tether-cutting reconnection to be the primary triggering mechanism of the flux rope eruption. Interestingly, the flux rope eruption exhibited a two-phase evolution during which the “standard” large-scale flare reconnection process originated two composite M-class flares. The eruption of the flux rope is followed by the coronagraphic observation of a fast, halo CME with linear projected speed of 1366 km?s?1. The dynamic radio spectrum in the decameter-hectometer frequency range reveals multiple continuum-like enhancements in type II radio emission which imply the interaction of the CME with other preceding slow speed CMEs in the corona within \(\approx10\)?–?\(90~\mbox{R} _{\odot}\). The scenario of CME–CME interaction in the corona and interplanetary medium is further confirmed by the height–time plots of the CMEs occurring during 19?–?21 June. In situ measurements of solar wind magnetic field and plasma parameters at 1 AU exhibit two distinct magnetic clouds, separated by a magnetic hole. Synthesis of near-Sun observations, interplanetary radio emissions, and in situ measurements at 1 AU reveal complex processes of CME–CME interactions right from the source active region to the corona and interplanetary medium that have played a crucial role towards the large enhancement of the geoeffectiveness of the halo CME on 21 June 2015.  相似文献   

18.
Using data from the Transition Region and Coronal Explorer (TRACE), Solar and Heliospheric Observatory (SOHO), Ramaty High Energy Solar Spectroscopic Imager (RHESSI), and Hida Observatory (HO), we present a detailed study of an EUV jet and the associated Hα filament eruption in a major flare in the active region NOAA 10044 on 29 July 2002. In the Hα line wings, a small filament was found to erupt out from the magnetic neutral line of the active region during the flare. Two bright EUV loops were observed rising and expanding with the filament eruption, and both hot and cool EUV plasma ejections were observed to form the EUV jet. The two thermal components spatially separated from each other and lasted for about 25 minutes. In the white-light corona data, a narrow coronal mass ejection (CME) was found to respond to this EUV jet. We cannot find obvious emerging flux in the photosphere accounting for the filament eruption and the EUV jet. However, significant sunspot decay and magnetic-flux cancelation owing to collision of opposite flux before the events were noticed. Based on the hard X-ray data from RHESSI, which showed evidence of magnetic reconnection along the main magnetic neutral line, we think that all of the observed dynamical phenomena, including the EUV jet, filament eruption, flare, and CME, should have a close relation to the flux cancelation in the low atmosphere.  相似文献   

19.
We present a multiwavelength study of the large-scale coronal disturbances associated with the CME?–?flare event recorded on 24 December 1996. The kinematics of the shock wave signature, the type II radio burst, is analyzed and compared with the flare evolution and the CME kinematics. We employ radio dynamic spectra, position of the Nançay Radioheliograph sources, and LASCO-C1 observations, providing detailed study of this limb event. The obtained velocity of the shock wave is significantly higher than the contemporaneous CME velocity (1000 and 235 km?s?1, respectively). Moreover, since the main acceleration phase of the CME took place 10?–?20 min after the shock wave was launched, we conclude that the shock wave on 24 December 1996 was probably not driven by the CME. However, the shock wave was closely associated with the flare impulsive phase, indicating that it was ignited by the energy release in the flare.  相似文献   

20.
We study a filament eruption, two-ribbon flare, and coronal mass ejection (CME) that occurred in NOAA Active Region 10898 on 6 July 2006. The filament was located South of a strong sunspot that dominated the region. In the evolution leading up to the eruption, and for some time after it, a counter-clockwise rotation of the sunspot of about 30 degrees was observed. We suggest that the rotation triggered the eruption by progressively expanding the magnetic field above the filament. To test this scenario, we study the effect of twisting the initially potential field overlying a pre-existing flux-rope, using three-dimensional zero-β MHD simulations. We first consider a relatively simple and symmetric system, and then study a more complex and asymmetric magnetic configuration, whose photospheric-flux distribution and coronal structure are guided by the observations and a potential field extrapolation. In both cases, we find that the twisting leads to the expansion of the overlying field. As a consequence of the progressively reduced magnetic tension, the flux-rope quasi-statically adapts to the changed environmental field, rising slowly. Once the tension is sufficiently reduced, a distinct second phase of evolution occurs where the flux-rope enters an unstable regime characterised by a strong acceleration. Our simulations thus suggest a new mechanism for the triggering of eruptions in the vicinity of rotating sunspots.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号