共查询到20条相似文献,搜索用时 156 毫秒
1.
建立了适合于带暗支撑剪力墙非线性分析的宏观单元模型,分别用带斜杆的多垂直杆单元模型和模拟框架单元模型对2个带暗支撑剪力墙进行了静力弹塑性分析,给出了模拟框架单元模型的刚度矩阵和杆件非线性力-变形关系,对两种不同单元模型的计算结果进行了对比,结果表明该两种模型能够较好反映带暗支撑剪力墙的弹性和塑性阶段的受力特点。 相似文献
2.
3.
大量的研究结果表明,在叠合板式剪力墙中引入钢板暗支撑能够有效提高叠合板式剪力墙的抗震性能。为了指导该种带钢板暗支撑叠合板式剪力墙的抗震设计,利用已有的带钢板暗支撑叠合板式剪力墙的试验数据,基于四折线骨架模型,对开裂点、屈服点、峰值点、极限点的荷载、位移及刚度进行计算分析,同时采用逐步回归分析得到了残余位移计算模型,进而构建了带钢板暗支撑叠合板式剪力墙的恢复力模型。通过与试验结果的对比发现:建立的四折线骨架模型获得的各受力阶段的荷载、位移及刚度与试验结果吻合良好,提出的逐步回归分析得到的残余位移模型可以较好地预测带钢板暗支撑叠合板式剪力墙各加载循环的残余位移,因此,文中提出的恢复力模型与残余位移模型能够较为真实地反映带钢板暗支撑叠合剪力墙的滞回特性,可为其抗震设计提供理论依据。 相似文献
4.
5.
6.
带暗支撑双肢短肢剪力墙抗震性能试验研究 总被引:4,自引:1,他引:4
钢筋混凝土短肢剪力墙结构是一种新型的中高层住宅结构体系,已有较多的工程应用,但是短肢剪力墙的抗震性能较差,如何提高短肢剪力墙的抗震性能是目前工程界十分关注的问题。本文提出了带暗支撑短肢剪力墙,并以典型的双肢短肢剪力墙为例,选择了4个1/3缩尺的双肢短肢剪力墙试验模型,2个为普通双肢短肢剪力墙模型,2个为带暗支撑双肢剪力墙模型,进行了对比性的抗震性能试验研究,较系统地分析了带暗支撑双肢短肢剪力墙的承载力、刚度、延性、耗能能力及破坏特征,建立了承载力计算模型,计算结果与实测结果符合较好。试验表明,带暗支撑双肢短肢剪力墙的抗震能力比普通双肢短肢剪力墙显著提高。 相似文献
7.
8.
9.
10.
11.
12.
Three‐dimensional beam‐truss model for reinforced concrete walls and slabs – part 1: modeling approach,validation, and parametric study for individual reinforced concrete walls 下载免费PDF全文
A three‐dimensional beam‐truss model for reinforced concrete (RC) walls developed by the first two authors in a previous study is modified to better represent the flexure–shear interaction and more accurately capture diagonal shear failures under static cyclic or dynamic loading. The modifications pertain to the element formulations and the determination of the inclination angle of the diagonal elements. The modified beam‐truss model is validated using the experimental test data of eight RC walls subjected to static cyclic loading, including two non‐planar RC walls under multiaxial cyclic loading. Five of the walls considered experienced diagonal shear failure after reaching their flexural strength, while the other three walls had a flexure‐dominated response. The numerically computed lateral force–lateral displacement and strain contours are compared with the experimentally recorded response and damage patterns for the walls. The effects of different model parameters on the computed results are examined by means of parametric analyses. Extension of the model to simulate RC slabs and coupled RC walls is presented in a companion paper. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
进行了3个1/3缩尺的中高剪力墙的抗震性能试验研究,包括1个混凝土中高剪力墙、1个内藏钢框架组合中高剪力墙和1个内藏钢桁架组合中高剪力墙。在试验研究基础上,对比分析了各剪力墙的刚度及其衰减过程、承载力、延性、滞回特性及破坏特征。试验表明:内藏钢框架混凝土组合中高剪力墙的抗震性能比普通混凝土中高剪力墙明显提高;内藏钢桁架混凝土组合中高剪力墙的抗震性能比普通混凝土中高剪力墙显著提高。 相似文献
14.
15.
轴压比是影响剪力墙抗震性能的一个主要因素,直接决定其延性性能。本文对两组共六个高剪力墙1/3缩尺的试件模型进行了不同轴压比下的低周反复荷载试验,研究了轴压比对内藏钢桁架混凝土组合剪力墙抗震性能的影响,对比了各试件的承载力、刚度及其退化过程、延性、滞回特性及破坏特征。试验表明:随着轴压比的提高其试件的承载力提高但延性下降;不同轴压比下内藏钢桁架混凝土组合剪力墙均能明显提高钢筋混凝土剪力墙的抗震性能。 相似文献
16.
17.
18.
Mohammadreza Moharrami Ioannis Koutromanos Marios Panagiotou Sadik Can Girgin 《地震工程与结构动力学》2015,44(5):677-694
This paper uses nonlinear truss models for the analysis of shear‐dominated reinforced concrete (RC) columns subjected to cyclic loading. A previously established method, aimed to the analysis of RC walls, is enhanced to allow simulations of column members. The concrete constitutive equations are modified to account for the contribution of the aggregate interlock to the shear resistance. Additionally, an equation is proposed to determine the inclination angle of the diagonal members in the truss models. The modeling approach is validated using the results of quasi‐static and dynamic tests on shear‐dominated RC columns. The combination of predictive capabilities and conceptual simplicity establishes truss‐based models as an attractive approach for the systematic analysis of shear‐dominated RC frame construction. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
19.
型钢混凝土剪力墙的抗震性能研究 总被引:1,自引:1,他引:1
型钢混凝土剪力墙(亦称为SRC剪力墙)是一种新型的剪力墙,其抗弯承载力、抗剪承载力及延性均好于普通剪力墙。本文简要总结了近年来国内外关于型钢混凝土剪力墙抗震研究的成果。在此基础上,进行了较高轴压比下内藏钢桁架混凝土组合高剪力墙的抗震性能试验研究。试验研究表明,内藏钢桁架的存在明显改善了高轴压比下型钢混凝土高剪力墙的抗震性能。 相似文献
20.
为了提高装配式剪力墙的抗震性能,提出并设计了一片暗柱内置H型钢装配式内藏钢桁架混凝土剪力墙及一片暗柱内置圆钢管装配式内藏钢桁架混凝土剪力墙,其中H型钢竖向连接采用顶底角钢复合连接,圆钢管竖向连接采用端板焊接.通过对试件进行低周反复加载试验,得到剪力墙试件的破坏模式、滞回曲线、承载力、延性、残余变形、刚度退化和耗能能力等... 相似文献