首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Yampa and Elkhead Mountains volcanic fields were erupted into sediment-filled fault basins during Miocene crustal extension in NW Colorado. Post-Miocene uplift and erosion has exposed alkali basalt lavas, pyroclastic deposits, volcanic necks and dykes which record hydrovolcanic and strombolian phenomena at different erosion depths. The occurrence of these different phenomena was related to the degree of lithification of the rocks through which the magmas rose. Hydrovolcanic interactions only occurred where rising basaltic magma encountered wet, porous, non-lithified sediments of the 600 m thick Miocene Brown's Park Formation. The interactions were fuelled by groundwater in these sediments: there was probably no standing surface water. Dykes intruded into the sediments have pillowed sides, and local swirled inclusions of sediment that were injected while fluidized in steam from heated pore water. Volcanic necks in the sediments consist of basaltic tuff, sediment blocks and separated grains derived from the sediments, lithic blocks (mostly derived from a conglomerate forming the local base of the Brown's Park Formation), and dykes composed of disaggregated sediment. The necks are cut by contemporaneous basalt dykes. Hydrovolcanic pyroclastic deposits formed tuff cones up to 100 m thick consisting of bedded air-fall, pyroclastic surge, and massive, poorly sorted deposits (MPSDs). All these contain sub-equal volumes of basaltic tuff and disaggregated sediment grains from the Brown's Park Formation. Possible explosive and effusive modes of formation for the MPSDs are discussed. Contemporaneous strombolian scoria deposits overlie lithified Cretaceous sedimentary rocks or thick basalt lavas. Volcanic necks intruded into the Cretaceous rocks consist of basalt clasts (some with spindle-shape), lithic clasts, and megacrysts derived from the magma, and are cut by basalt dykes. Rarely, strombolian deposits are interbedded with hydrovolcanic pyroclastic deposits, recording changes in eruption behaviour during one eruption. The hydrovolcanic eruptions occurred by interaction of magma with groundwater in the Brown's Park sediments. The explosive interactions disaggregated the sediment. Such direct digestion of sediment by the magma in the vents would probably not have released enough water to maintain a water/magma mass ratio sufficient for hydrovolcanic explosions to produce the tuff cones. Probably, additional water (perhaps 76% of the total) was derived by flow through the permeable sediments (especially the basal conglomerate to the formation), and into the vents.  相似文献   

2.
The pyroclastic deposits of many basaltic volcanic centres show abrupt transitions between contrasting eruptive styles, e.g., Hawaiian versus Strombolian, or `dry' magmatic versus `wet' phreatomagmatic. These transitions are controlled dominantly by variations in degassing patterns, magma ascent rates and degrees of interaction with external water. We use Crater Hill, a 29 ka explosive/effusive monogenetic centre in the Auckland volcanic field, New Zealand, as a case study of the transitions between these end-member eruptive styles. The Crater Hill eruption took place from at least 4 vents spaced along a NNE-trending, 600-m-long fissure that is contained entirely within a tuff ring generated during the earliest eruption phases. Early explosive phases at Crater Hill were characterised by eruption from multiple unstable and short-lived vents; later, dominantly extrusive, volcanism took place from a more stable point source. Most of the Crater Hill pyroclastic deposits were formed in 3 phreatomagmatic (P) and 4 `dry' magmatic (M) episodes, forming in turn the outer tuff ring and maar crater (P1, M1, P2) and scoria cone 1 (M2–M4). This activity was followed by formation of a lava shield and scoria cone 2. Purely `wet' activity is represented by the bulk of P1 and P2, and purely `dry' activity by much of M2–M4. However, M1 and parts of M2 and M4 show evidence for simultaneous eruptions of differing style from adjacent vents and rapid variations in the extent and timing of magma:water interaction at each vent. The nature of the wall-rock lithics, and these rapid variations in inferred water/magma ratios imply interaction was occurring mostly at depths of ≤80 m, and the vesicularity patterns in juvenile clasts from these and the P beds imply that rapid degassing occurred at these shallow levels. We suggest that abrupt transitions between eruptive styles, in time and space, at Crater Hill were linked to changes in the local magma supply rate and patterns and vigour of degassing during the final metres of ascent.  相似文献   

3.
The 14.1 Ma old composite ignimbrite cooling unit P1 (45 km3) on Gran Canaria comprises a lower mixed rhyolite-trachyte tuff, a central rhyolite-basalt mixed tuff, and a slightly rhyolite-contaminated basaltic tuff at the top. The basaltic tuff is compositionally zoned with (a) an upward change in basalt composition to higher MgO content (4.3–5.2 wt.%), (b) variably admixed rhyolite or trachyte (commonly <5 wt.%), and (c) an upward increasing abundance of basaltic and plutonic lithic fragments and cognate cumulate fragments. The basaltic tuff is divided into three structural units: (I) the welded basaltic ignimbrite, which forms the thickest part (c. 95 vol.%) and is the main subject of the present paper; (II) poorly consolidated massive, bomb- and block-rich beds interpreted as phreatomagmatic pyroclastic flow deposits; and (III) various facies of reworked basaltic tuff. Tuff unit I is a basaltic ignimbrite rather than a lava flow because of the absence of top and bottom breccias, radial sheet-like distribution around the central Tejeda caldera, thickening in valleys but also covering higher ground, and local erosion of the underlying P1 ash. A gradual transition from dense rock in the interior to ash at the top of the basaltic ignimbrite reflects a decrease in welding; the shape of the welding profile is typical for emplacement temperatures well above the minimum welding temperature. A similar transition occurs at the base where the ignimbrite was emplaced on cold ground in distal sections. In proximal sections the base is dense where it was emplaced on hot felsic P1 tuff. The intensity of welding, especially at the base, and the presence of spherical particles and of mantled and composite particles formed by accretion and coalescence in a viscous state imply that the flow was a suspension of hot magma droplets. The flow most likely had to be density stratified and highly turbulent to prevent massive coalescence and collapse. Model calculations suggest eruption through low pyroclastic fountains (<1000 m high) with limited cooling during eruption and turbulent flow from an initial temperature of 1160°C. The large volume of 26 km3 of erupted basalt compared with only 16 km3 of the evolved P1 magmas, and the extremely high discharge rates inferred from model calculations are unusual for a basaltic eruption. It is suggested that the basaltic magma was erupted and emplaced in a fashion commonly only attributed to felsic magmas because it utilized the felsic P1 magma chamber and its ring-fissure conduits. Evolution of the entire P1 eruption was controlled by withdrawal dynamics involving magmas differing in viscosity by more than four orders of magnitude. The basaltic eruption phase was initially driven by buoyancy of the basaltic magma at chamber depth and continued degassing of felsic magma, but most of the large volume of basalt magma was driven out of the reservoir by subsidence of a c. 10 km diameter roof block, which followed a decrease in magma chamber pressure during low viscosity basaltic outflow.  相似文献   

4.
Geochemical data and mapping from a Karoo flood basalt crater complex reveals new information about the ascent and eruption of magma batches during the earliest phases of flood basalt volcanism. Flood basalt eruptions at Sterkspruit, South Africa began with emplacement of thin lava flows before abruptly switching to explosive phreatomagmatic and magmatic activity that formed a nest of craters, spatter and tuff rings and cones that collectively comprise a crater complex >40 km2 filled by 9–18 km3 of volcaniclastic debris. Rising magma flux rates combined with reduced access of magma to external water led to effusion of thick Karoo flood basalts, burying the crater-complex beneath the >1.5 km-thick Lesotho lava pile. Geochemical data is consistent with flood basalt effusion from local dikes, and some lava flows likely shared or re-occupied vent sites active during explosive eruptions at Sterkspruit. Flood basalt magmas involved in Sterkspruit eruptions were chemically heterogenous. This study documents the rapid (perhaps simultaneous) eruption of three chemically distinct basaltic magmas which cannot be simply related to one another from one vent site within the Sterkspruit crater complex. Stratigraphic and map relationships indicate that eruption of the same three magma types took place from closely spaced vents over a short time during formation of the bulk of the crater-complex. Two magma types recognized there have not been recognized in the Karoo province before. The variable composition of flood basalts at Sterkspruit argues that magma batches in flood basalt fields may be small (0.5–1 km3) and not simply related to one another. This implies in turn that heterogeneities in the magma source region may be close to each other in time and space, and that eruptions of chemically distinct magmas may take place over short intervals of space and time without significant hybridisation in flood basalt fields.  相似文献   

5.
In the subaqueous growth and emergence of a basaltic volcano clasts are formed by one or a combination of (1) explosive release of magmatic volatiles; (2) explosive expansion and collapse of steam formed at magma-water contact surfaces; (3) explosive expansion of steam following enclosure of water in magma, or entrapment of water close to magma; and (4) cooling-contraction. These processes, named respectivelymagmatic explosivity, contact-surface steam explosivity, bulk interaction steam explosivity, andcooling-contraction granulation, can be enhanced by mutual interaction and feedback. The first three (explosive) processes are limited at certain water depths (hydrostatic pressures) and become increasingly vigorous at shallower levels. The depth of onset of magmatic explosivity depends largely on juvenile volatile content; it is up to 200 m for tholeiitic magmas and up to 1 km for alkalic magmas. At the depth where formation of clastic deposits becomes predominant over effusion of lavas, magmatic explosivity is subordinate to steam explosivity as a clast-forming process. The upward transition to accumulation of dominantly clastic deposits is not simply related to the onset of substantial exsolution of magmatic volatiles and can occur without it. Contact-surface explosivity commonly requires initiation by a vigorous impact between magma and water and, although no certain depth limit is known, likelihood of such explosivity decreases rapidly with depth. Clast generation by bulk interaction explosivity appears to be restricted to depths much shallower than that of the critical pressure of water, which in sea water is at about 3 km. Cooling-contraction granulation can occur in any depth of water, but at shallow levels may be replaced by contact-surface explosivity. During continuous eruption under water, tephra can be ejected and deposited within a cupola of steam such that rapid quenching does not occur. Emergent volcanoes are characterized by distinctive steam-explosive activity that results primarily from a bulk interaction between rapidly ascending magma and a highly mobile slurry of clastic material, water, and steam. The water gets into the vent by flooding across or through the top of the tephra pile, and violent explosions cease when this access is sealed. The eruptions during emergence of Surtsey and Capelinhos typify the distinctive explosive activity, the style and controls of which are different from those of maar volcanoes.  相似文献   

6.
We studied the distribution of tephra deposits discharged by the basaltic (52–54% SiO2) explosive eruption of 1973 on Tyatya Volcano (Kunashir I., Kuril Islands). We made maps showing lines of equal tephra thickness (isopachs) and lines of maximum size of pyroclastic particles (isopleths). These data were used to find the parameters of explosive activity using the standard techniques for each of the two phases of this eruption separately. The first, phreatomagmatic, phase discharged 0.008 km3 of tephra during the generation of maars on the volcano’s northern slope. The tephra mostly consisted of fragmented host rocks with admixtures of fragments of low vesiculated juvenile basalt. The phase lasted 20 hours, the rate of pyroclastic discharge was 2 × 105 kg/s; the eruptive plume reached heights of 4–6 km with wind speeds within 10 m/s. The second, magmatic, phase discharged 0.07 km3 of tephra during the generation of the Otvazhnyi scoria cone on the volcano’s southeastern slope. The tephra mostly consisted of juvenile basaltic scoria. The highly explosive Plinian part of this phase lasted 36 hours, the rate of pyroclastic discharge was 8 × 105 kg/s; the eruptive plume reached heights of 6–8 km with wind speeds of 10–20 m/s. The total tephra volume discharged by the eruption was approximately 0.08 km3; the total amount of ejected pyroclastic material (including the resulting monogenic edifices) was 0.11 km3; the volume of erupted magma was 0.05 km3 (the conversion was based on 2800 kg/m3 density); the volcanic explosivity index, or VEI, was 3. The production rate of the Tyatya plumbing system is estimated as 3 × 105 m3 magma per annum.  相似文献   

7.
The 274 ka “Basalt-Trachytic Tuff of Tuoripunzoli” (TBTT) from Roccamonfina volcano (Roman Region, Italy) consists of a basaltic scoria lapilli fall (Unit A) overlain by a trachytic sequence formed by a surge (Unit B), repetitive pumice lapilli and ash-rich layers both of fallout origin (Unit C) and a pyroclastic flow deposit (Unit D). The TBTT is widespread (40 km2) in the northern sector of the volcano, but limited to a small area on the southern slopes of the main cone. Interpolation between the northern deposits and the latter one yields a minimum depositional area of 123 km2, and an approximate bulk volume of 0.2-0.3 km3. Isopach and isopleth maps are consistent with a source vent within the main caldera of Roccamonfina.Unit A shows a fairly good sorting and a moderate grain size; glass fragments are cuspate and vesicular. Unit B is fine grained and poorly sorted; shards are blocky and nonvesicular. Pumice lapilli of Unit C are moderately sorted and moderately coarse grained. Glass shards are equant and vesicular. Lithic clasts are strongly comminuted to submillimetric sizes. By contrast, the ash-rich internal divisions are very fine grained and poorly sorted. They consist of a mixture of equant shards which are prevailingly blocky and poorly vesicular. Unit D is a massive, poorly sorted, moderately coarse-grained deposit. Glass fragments are nearly equant and slightly or nonvesicular.The TBTT is interpreted as due to eruption of a basaltic magma followed in rapid succession by one trachyte magma. Unit A formed by Subplinian fallout of a moderate, purely magmatic column. Interaction between a trachyte magma and water resulted in eruption of surge Unit B. A high-standing eruption column erupted alternating fallout pumice lapilli and fallout ashes. Pumice lapilli originated prevailingly from the inner part of the eruption column, whereas magma-water interaction on the external parts of the column resulted in ash fallout. The uppermost pyroclastic flow Unit D is interpreted as due to final collapse of the eruption column.  相似文献   

8.
A detailed stratigraphic analysis of the Avellino plinian deposit of the Somma-Vesuvius volcano shows a complicated eruptive sequence controlled by a combination of magmatic and hydromagmatic processes. The role of external water on the eruptive dynamics was most relevant in the very early phase of the eruption when the groundwater explosively interacted with a rising, gas-exolving magma body creating the first conduit. This phase generated pyroclastic surge and phreatoplinian deposits followed by a rapidly increasing discharge of a gas-rich, pure magmatic phase which erupted as the most violent plinian episode. This continuing plinian phase tapped the magma chamber, generating about 2.9 km3 of reverse-graded fallout pumice, more differentiated at the base and more primitive at the top (white and gray pumice). A giant, plinian column, rapidly grew up reaching a maximum height of 36 km.The progressive magma evacuation at a maximum discharge rate of 108 kg/s that accompanied a decrease of magmatic volatile content in the lower primitive magma allowed external water to enter the magma chamber, resulting in a drastic change in the eruptive style and deposit type. Early wet hydromagmatic events were followed by dry ones and only a few, subordinated magmatic phases. A thick, impressive sequence of pyroclastic surge bedsets of over 430 km2 in area with a total volume of about 1 km3 is the visible result of this hydromagmatic phase.  相似文献   

9.
The late Pleistocene San Venanzo maar and nearby Pian di Celle tuff ring in the San Venanzo area of Umbria, central Italy, appear to represent different aspects of an eruptive cycle accompanied by diatreme formation. Approximately 6x106 m3 of mostly lapillisized, juvenile ejecta with lesser amounts of lithics and 1x106 m3 of lava were erupted. The stratigraphy indicates intense explosive activity followed by lava flows and subvolcanic intrusions. The pyroclastic material includes lithic breccia derived from vent and diatreme wall erosion, roughly stratified lapilli tuff deposited by concentrated pyroclastic surge, chaotic scoriaceous pyroclastic flow and inverse graded grain-flow deposits. The key feature of the pyroclastics is the presence of concentric-shelled lapilli generated by accretion around the lithics during magma ascent in the diatreme conduits. The rock types range from kalsilite leucite olivine melilitite lavas and subvolcanic intrusions to carbonatite, phonolite and calcitic melilitite pyroclasts. Juvenile ejecta contain essential calcite whose composition and texture indicate a magmatic origin. Pyroclastic carbonatite activity is also indicated by the presence of carbonatite ash beds. The San Venanzo maar-forming event is believed to have been trigered by fluid-rich carbonatite-phonolite magma. The eruptive centre the moved to the Pian di Celle tuff ring, where the eruption of degassed olivine melilititic magma and late intrusions ended magmatic activity in the area. In both volcanoes the absence of phreatomagmatic features together with the presence of large amounts of primary calcite suggests carbonatite segregation and violent exsolution of CO2 which, flowing through the diatremes, produced the peculiar intrusive pyroclastic facies and triggered explosions.  相似文献   

10.
The Atexcac maar is located in the central part of the Serdán–Oriental lacustrine/playa basin in the eastern Mexican Volcanic Belt. It is part of a dispersed and isolated monogenetic field consisting of maar volcanoes, basaltic cinder cones and rhyolitic domes. Atexac is a maar volcano excavated into pyroclastic deposits, basaltic lava flows and the flanks of a cinder cone cluster, which itself was built on a topographic high consisting of limestone. It has an ENE-trending elliptical shape with beds, mostly unconsolidated deposits that dip outward at 16–22°. The Atexcac crater was formed from vigorous phreatomagmatic explosions in which fluctuations in the availability of external water, temporal migration of the locus of the explosion, and periodic injection of new magma were important controls on the evolution of the maar crater. Variations in grain sizes and component proportions of correlated deposits from the different sections suggest a migration of the locus of explosions, producing different eruptive conditions with fluctuating water–magma interactions. Deposits rich in large intrusive and limestone blocks are associated with a matrix enriched in small andesitic lapilli. This could suggest differential degrees of fragmentation due to inherited (previously acquired) fragmentation and/or relative distance to the locus of explosions. Initial short-lived phreatic explosions started at the southwest part of the crater and were followed by an ephemeral vertical column and the influx of external water that led to relatively shallow explosive interactions with the ascending basaltic magma. Drier explosions progressed downward and/or laterally northward, sampling subsurface rock types, particularly intrusive, limestone and andesitic zones as well as localized altered zones (N-NE), caused by repetitive injection of basaltic magma. A final explosive phase involved a new injection of magma and a new influx of external water producing wetter conditions at the end of the maar formation. We infer the aquifer was formed by fractured rocks, predominantly andesitic lava flows and limestone rocks. Andesitic accessory clasts dominate in all stratigraphic levels but these rocks are not exposed in the nearby area. These local hydrogeological conditions contrast with those at nearby maar volcanoes, where the water for the magma/water interactions apparently mostly came from a dominantly unconsolidated tuffaceous aquifer, producing tuff rings with a much lower profile than Atexcac.  相似文献   

11.
张雯倩  李霓 《地震地质》2021,43(1):105-122
高温岩浆在上升过程中遇到地下水或地表水发生水岩相互作用,产生大量水蒸汽导致的爆炸式喷发作用,可称为射汽岩浆喷发作用,是一种较为特殊的火山活动,主要产物为低平火山口和基浪堆积物。国内外许多火山学家对射汽岩浆喷发作用的喷发过程和产物开展了岩相学、沉积学、火山物理学和地球化学综合研究,通过实验、计算机模拟等方法探究了射汽岩浆喷发过程的影响因素。文中介绍了国内外研究人员的相关研究成果,以便更好地了解射汽岩浆喷发这种特殊的火山作用形式,以期能将其应用于现代火山灾害预防和监测工作中,保护人们的生命和财产安全。  相似文献   

12.
Apoyo caldera, near Granada, Nicaragua, was formed by two phases of collapse following explosive eruptions of dacite pumice about 23,000 yr B.P. The caldera sits atop an older volcanic center consisting of lava flows, domes, and ignimbrite (ash-flow tuff). The earliest lavas erupted were compositionally homogeneous basalt flows, which were later intruded by small andesite and dacite flows along a well defined set of N—S-trending regional faults. Collapse of the roof of the magma chamber occurred along near-vertical ring faults during two widely separated eruptions. Field evidence suggests that the climactic eruption sequence opened with a powerful plinian blast, followed by eruption column collapse, which generated a complex sequence of pyroclastic surge and ignimbrite deposits and initiated caldera collapse. A period of quiescence was marked by the eruption of scoria-bearing tuff from the nearby Masaya caldera and the development of a soil horizon. Violent plinian eruptions then resumed from a vent located within the caldera. A second phase of caldera collapse followed, accompanied by the effusion of late-stage andesitic lavas, indicating the presence of an underlying zoned magma chamber. Detailed isopach and isopleth maps of the plinian deposits indicate moderate to great column heights and muzzle velocities compared to other eruptions of similar volume. Mapping of the Apoyo airfall and ignimbrite deposits gives a volume of 17.2 km3 within the 1-mm isopach. Crystal concentration studies show that the true erupted volume was 30.5 km3 (10.7 km3 Dense Rock Equivalent), approximately the volume necessary to fill the caldera. A vent area located in the northeast quadrant of the present caldera lake is deduced for all the silicic pyroclastic eruptions. This vent area is controlled by N—S-trending precaldera faults related to left-lateral motion along the adjacent volcanic segment break. Fractional crystallization of calc-alkaline basaltic magma was the primary differentiation process which led to the intermediate to silicic products erupted at Apoyo. Prior to caldera collapse, highly atypical tholeiitic magmas resembling low-K, high-Ca oceanic ridge basalts were erupted along tension faults peripheral to the magma chamber. The injection of tholeiitic magmas may have contributed to the paroxysmal caldera-forming eruptions.  相似文献   

13.
The strongly peralkaline Green Tuff, Pantelleria, is an example of a thin, densely welded air-fall tuff which mantles an area of at least 85 km2. Offshore the tuff is correlated with the Y-6 ash layer in the central Mediterranean Sea, and the total volume of the eruption is estimated at 7 km3 D.R.E. New petrological data suggests that the tuff was erupted from a zoned magma chamber containing a cooler, more fractionated upper zone relative to be bulk of the magma. Analysis of the distribution of accessory lithic fragments in terms of existing models of eruption dynamics indicates emplacement by a plinian-type eruption. It is shown that, due to the low viscosity of pantelleritic ejecta, dense welding can occur at moderate tephra accumulation rates and a rate of the order of 1 cm/minute is suggested for the Green Tuff; this yields an estimate for the eruption duration of rather less than one day. It is predicted that welded tuff should be formed during large plinian eruptions of pantelleritic magma, and therefore that welded airfall tuffs should be common in areas of peralkaline volcanism.  相似文献   

14.
Volcanic fields in the Pannonian Basin, Western Hungary, comprise several Mio/Pliocene volcaniclastic successions that are penetrated by numerous mafic intrusions. Peperite formed where intrusive and extrusive basaltic magma mingled with tuff, lapilli-tuff, and non-volcanic siliciclastic sediments within vent zones. Peperite is more common in the Pannonian Basin than generally realised and may be also important in other settings where sediment sequences accumulate during active volcanism. Hajagos-hegy, an erosional remnant of a maar volcano, was subsequently occupied by a lava lake that interacted with unconsolidated sediments in the maar basin and formed both blocky and globular peperite. Similar peperite developed in Kissomlyó, a small tuff ring remnant, where dykes invaded lake sediments that formed within a tuff ring. Lava foot peperite from both Hajagos-hegy and Kissomlyó were formed when small lava flows travelled over wet sediments in craters of phreatomagmatic volcanoes. At Ság-hegy, a large phreatomagmatic volcanic complex, peperite formed along the margin of a coherent intrusion. All peperite in this study could be described as globular or blocky peperite. Globular and blocky types in the studied fields occur together regardless of the host sediment.  相似文献   

15.
The 14 ka Puketarata eruption of Maroa caldera in Taupo Volcanic Zone was a dome-related event in which the bulk of the 0.25 km3 of eruption products were emplaced as phreatomagmatic fall and surge deposits. A rhyolitic dike encountered shallow groundwater during emplacement along a NE-trending normal fault, leading to shallow-seated explosions characterised by low to moderate water/magma ratios. The eruption products consist of two lava domes, a proximal tuff ring, three phreatic collapse craters, and a widespread fall deposit. The pyroclastic deposits contain dominantly dense juvenile clasts and few foreign lithics, and relate to very shallow-level disruption of the growing dome and its feeder dike with relatively little involvement of country rock. The distal fall deposit, representing 88% of the eruption products is, despite its uniform appearance and apparently subplinian dispersal, a composite feature equivalent to numerous discrete proximal phreatomagmatic lapilli fall layers, each deposited from a short-lived eruption column. The Puketarata products are subdivided into four units related to successive phases of:(A) shallow lava intrusion and initial dome growth; (B) rapid growth and destruction of dome lobes; (C) slower, sustained dome growth and restriction of explosive disruption to the dome margins; and (D) post-dome withdrawal of magma and crater-collapse. Phase D was phreatic, phases A and C had moderate water: magma ratios, and phase B a low water: magma ratio. Dome extrusion was most rapid during phase B, but so was destruction, and hence dome growth was largely accomplished during phase C. The Puketarata eruption illustrates how vent geometry and the presence of groundwater may control the style of silicic volcanism. Early activity was dominated by these external influences and sustained dome growth only followed after effective exclusion of external water from newly emplaced magma.  相似文献   

16.
The youngest dacitic Plinian eruption in west-central Nicaragua, forming the 18 km3 Chiltepe Tephra (CT), occurred about nineteen hundred years ago at Apoyeque stratovolcano, which dominates the Chiltepe volcanic complex 15 km north of the capital Managua, where the CT is 2 m thick. We have traced the CT from its proximal facies at the crater rim, through the medial facies in the lowlands around Apoyeque, and to the distal facies up to 550 km offshore in the Pacific. While medial and distal facies consist of widespread Plinian fall deposits, the proximal facies reveals the complexity of this eruption, which we divide into four phases (I–IV). Interaction of rising magma with a pre-existing crater lake generated the phreatomagmatic opening phase I of the eruption, which produced ash fall with accretionary lapilli. Phase II marked a rapid change to persistent magmatic activity that yielded several large Plinian eruptions, declining through a period of unstable eruption conditions, followed by a short hiatus. Phase III began with unstable conditions, probably as a result of eastward migration and widening of the vent, leading to a second period of Plinian eruptions with three major events reaching magma discharge rates five times larger than those of phase II. Phase III again declined through unstable eruption conditions before magmatic activity terminated. Numerous explosions in the shallow hydrothermal system during the final phase IV resulted in the formation of a phreatic tuff ring on the rim of Apoyeque crater. The white, highly-vesicular, dacitic CT pumice contains plagioclase (An45–68), orthopyroxene, clinopyroxene, and minor hornblende, apatite and titanomagnetite phenocrysts. A very subordinate fraction of gray pumice has the highest crystal content, the least evolved bulk-rock, but the most evolved matrix-glass composition. The CT dacite has two unusual compositional features: (1) all white dacite has the same melt (matrix-glass) composition such that variations in bulk-rock compositions (64–68 wt% SiO2) simply reflect different phenocryst contents of 10–35%, interpreted as the result of gradual phenocryst settling in the magma chamber. (2) Abundant olivine crystals with a bimodal distribution in Mg# (modes at Mg# = 0.75 and Mg# = 0.8) are dispersed throughout the erupted dacite. These are clearly out of equilibrium with the dacitic melt and are interpreted as xenocrysts derived from the basaltic Nejapa-Miraflores volcanic lineament that intersects the Chiltepe volcanic complex and was contemporaneously active. Thermobarometric estimates place the dacitic CT magma reservoir in the upper crust (<250 MPa), with a temperature of about 890°C and about 5 wt% water dissolved in the melt. Comparing water and chlorine contents with respective solubility models suggests that volatile degassing began in the magma reservoir and triggered the CT eruption. From the vertical compositional variation pattern of the CT we deduce that the conduit tapped the magma chamber not at the top but from the side, at some deeper level, and that subsequent magma withdrawal was governed by both variations in discharge rate and possible upward migration and/or widening of the conduit entrance.  相似文献   

17.
The petrology of the highly phyric two-pyroxene andesitic to dacitic pyroclastic rocks of the November 13, 1985 eruption of Nevado del Ruiz, Colombia, reveals evidence of: (1) increasingly fractionated bulk compositions with time; (2) tapping of a small magma chamber marginally zoned in regard to H2O contents (1 to 4%), temperature (960–1090°C), and amount of residual melt (35 to 65%); (3) partial melting and assimilation of degassed zones in the hotter less dense interior of the magma chamber; (4) probable heating, thermal disruption and mineralogic and compositional contamination of the magma body by basaltic magma “underplating”; and (5) crustal contamination of the magmas during ascent and within the magma chamber. Near-crater fall-back or “spill-over” emitted in the middle of the eruptive sequence produced a small pyroclastic flow that became welded in its central and basal portions because of ponding and thus heat conservation on the flat glaciated summit near the Arenas crater. The heterogeneity of Ruiz magmas may be related to the comparatively small volume (0.03 km3) of the eruption, nearly ten times less than the 0.2 km3 of the Plinian phase of Mount St. Helens, and probable steep thermal and PH2O gradients of a small source magma chamber, estimated at 300 m long and 100 m wide for an assumed ellipsoidal shape.  相似文献   

18.
The Middle Scoria deposit represents an explosive eruption of basaltic andesite magma (54 wt. % SiO2) from Okmok volcano during mid-Holocene time. The pattern of dispersal and characteristics of the ejecta indicate that the eruption opened explosively, with ash textural evidence for a limited degree of phreatomagmatism. The second phase of the eruption produced thick vesicular scoria deposits with grain texture, size and dispersal characteristics that indicate it was violent strombolian to subplinian in style. The third eruptive phase produced deposits with a shift towards grain shapes that are dense, blocky, and poorly vesicular, and intermittent surge layers, indicating later transitions between magmatic (violent strombolian) to phreatomagmatic (vulcanian) eruptive styles. Isopach maps yield bulk volume estimates that range from 0.06 to 0.43 km3, with ~ 0.04 to 0.25 km3 total DRE. The associated column heights and mass discharge values calculated from isopleth maps of individual Middle Scoria layers are 8.5 – 14 km and 0.4 to 45 × 106 kg/s. The Middle Scoria tephras are enriched in plagioclase microlites that have the textural characteristics of rapid magma ascent and relatively high degrees of effective undercooling. Those textures probably reflect the rapid magma ascent accompanying the violent strombolian and subplinian phases of the eruption. In the later stages of the eruption, the plagioclase microlite number densities decrease and textures include more tabular plagioclase, indicating a slowing of the ascent rate. The findings on the Middle Scoria are consistent with other explosive mafic eruptions, and show that outside of the two large caldera-forming eruptions, Okmok is also capable of producing violent mafic eruptions, marked by varying degrees of phreatomagmatism.  相似文献   

19.
The Averno 2 eruption (3,700 ± 50 a B.P.) was an explosive low-magnitude event characterized by magmatic and phreatomagmatic explosions, generating mainly fall and surge beds, respectively. It occurred in the Western sector of the Campi Flegrei caldera (Campanian Region, South Italy) at the intersection of two active fault systems, oriented NE and NW. The morphologically complex crater area, largely filled by the Averno lake, resulted from vent activation and migration along the NE-trending fault system. The eruption generated a complex sequence of pyroclastic deposits, including pumice fall deposits in the lower portion, and prevailing surge beds in the intermediate-upper portion. The pyroclastic sequence has been studied through stratigraphical, morphostructural and petrological investigations, and subdivided into three members named A through C. Member A was emplaced during the first phase of the eruption mainly by magmatic explosions which generated columns reaching a maximum height of 10 km. During this phase the eruption reached its climax with a mass discharge rate of 3.2 106 kg/s. Intense fracturing and fault activation favored entry of a significant amount of water into the system, which produced explosions driven by variably efficient water-magma interaction. These explosions generated wet to dry surge deposits that emplaced Member B and C, respectively. Isopachs and isopleths maps, as well as areal distribution of ballistic fragments and facies variation of surge deposits allow definition of four vents that opened along a NE oriented, 2 km long fissure. The total volume of magma extruded during the eruption has been estimated at about 0.07 km3 (DRE). The erupted products range in composition from initial, weakly peralkaline alkali-trachyte, to last-emplaced alkali-trachyte. Isotopic data and modeling suggest that mixing occurred during the Averno 2 eruption between a more evolved, less radiogenic stored magma, and a less evolved, more radiogenic magma that entered the shallow reservoir to trigger the eruption. The early phases of the eruption, during which the vent migrated from SW to the center of the present lake, were fed by the more evolved, uppermost magma, while the following phases extruded the less evolved, lowermost magma. Integration of the geological and petrological results suggests that the Averno 2 complex eruption was fed from a dyke-shaped shallow reservoir intruded into the NE-SW fault system bordering to the west the La Starza resurgent block, within the caldera floor.  相似文献   

20.
Xenoliths in pyroclastic fall deposits from the 1975 Tolbachik eruption constrain the timing and development of subsurface conduits associated with basaltic cinder cone eruptions. The two largest Tolbachik vents contain xenoliths derived from magmatic and hydromagmatic processes, which can be correlated with observed styles of eruption activity. Although many basaltic eruptions progress from early hydromagmatic activity to late magmatic activity, transient hydromagmatic events occurred relatively late in the 1975 eruption sequence. Magmatic fall deposits contain 0.01–0.3 vol.% xenoliths from <3-km-deep rocks, likely derived from 6–15-m-wide and 1.7–2.8-km-deep conduits. Intervals that supported the highest tephra columns (i.e., droplet flow regime) produced few of these xenoliths; most were derived from intervals with relatively lower columns and active lava flows (i.e., annular 2-phase flow). Several periods of decreased eruptive activity resulted in inflow of groundwater from >500 m depth into the dry-out zone around the conduit, disrupting and ejecting 105–106 m3 of wall-rock through hydromagmatic processes with conduits widening to 8–48 m. Hydromagmatic falls contain 60–75 vol.% of highly fragmented xenoliths, with juvenile clasts displaying obvious magma-water interaction features. During the largest hydromagmatic event, unusual breccia-bombs formed containing a wide range of fresh and pyrometamorphic xenoliths suspended in a quenched basaltic matrix. Hydromagmatic activity during the 1975 Tolbachik eruption occurred below likely fragmentation depths for a basalt containing 2.2 wt.% magmatic water. This activity is more likely related to conduit-wall collapse rather than variations in conduit-flow pressure. In contrast, larger volume silicic eruptions may have transient hydromagmatic events in response to conduit flow dynamics above the magma fragmentation depth. The 1975 Tolbachik volcanoes are reasonably analogous to Quaternary basaltic volcanoes in the Yucca Mountain region and can guide interpretations of their poorly preserved deposits. The youngest basaltic volcanoes near Yucca Mountain have cone deposits characterized by elevated xenolith abundances and distinctive xenolith breccia-bombs, remarkably similar to 1975 Tolbachik deposits. Extrapolation of 1975 Tolbachik data suggests conduits for some Yucca Mountain basaltic volcanoes may have widened locally on the order of 50 m in response to late-stage hydromagmatic events.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号