共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
河南公峪金矿区断裂控矿作用分析 总被引:3,自引:0,他引:3
李永峰 《有色金属矿产与勘查》1999,8(6):517-521
公峪金矿区以构造蚀变岩型金矿为主,已发现金矿脉20余条,预测远景储量50t以上,找矿前景良好。根据构造控矿的观点,从区域构造应力场转换入手,分析了区域构造演化与成矿作用的关系,对矿区内空矿作用进行了论述,找出正是由于控矿断裂的规律性活动导致了工业矿体具有等间距性、侧列性及侧状性等分布规律,控矿断裂的规模及演化控制了矿体的规模及演化;阐述了构造活动与矿体定位的关系。 相似文献
3.
安徽东至查册桥金矿断裂构造型式、控岩控矿和区域构造意义 总被引:3,自引:0,他引:3
查册桥金矿是近年在安徽省东至县发现的具一定规模的金矿床,矿床的形成与燕山期强烈的构造岩浆活动有密切的时空和成因联系。我们通过金矿勘查及专题研究,对区内的主要断裂构造进行了划分,对可观测的主要断裂构造基本特征、形成与演化、相互关系及控岩控矿作用进行较系统的研究,初步认为,区内主要断裂构造在印支期前构造基础上经印支期和燕山期强烈的构造活动形成,记录了江南过渡带北缘中生代构造转换的过程;区内断裂构造具重要的控岩控矿作用,其中高坦断裂控制了东西向构造岩浆岩带,兰程畈断层带控制了北东向构造岩浆岩带,区内的矿体多受O/S界面逆冲推(滑)覆断裂、花山洋湖断层带和北东向断层带控制,并主要赋存于其断层破碎带及次级断裂构造破碎带内。同时对区内高坦断裂表现形式、形成机制、与其他构造的关系及本区和区域控岩控矿作用进行了探讨,建立了区内主要断裂的形成模型。 相似文献
4.
根据泰宁何宝山金矿区的控矿构造特征的综合分析,认为何宝山金矿区断裂构造发育,主要有近南北向、北东向、北西向3组。北东向的断裂为导矿构造,南北向断裂为控矿构造。控矿断裂为2组近南北向的断裂裂隙群,具有明显的剪性特征,控制了金矿化蚀变带及金矿体的空间展布。近东西向断裂构造为成矿后期的,对南北向的控矿断裂构造具有破坏作用。金矿化蚀变体产于断裂破碎带内,明显受断裂控制。而金矿化程度与蚀变强弱、断裂的规模、破碎程度有直接相关。结合地质类比法,通过构造分析法及矿区地质条件、矿化特征综合分析,认为矿区F3断裂及弧形的拐弯处、F2-4断裂深部为矿体产出有利部位,矿区北部在断裂构造收敛部位、帚状构造砥柱边缘为寻找矿体有利地段。 相似文献
5.
论控矿断裂力学性质判析的若干问题 总被引:1,自引:0,他引:1
自然界绝大多数控矿断裂均具明显的多期活动特征,对其多期活动性及其力学性质的研究,尤其是成矿期力学性质的判析,是控矿构造区域应力场分析和构造控矿规律研究的关键所在。本文就控矿断裂力学性质研究中常用的却又易产生误判的若干判析标志,进行初步分析和探讨。 相似文献
6.
7.
玲珑金矿田不同级别构造控矿特征 总被引:5,自引:0,他引:5
在我国著名的胶东玲珑金矿田中,发育有众多的断裂构造,这些断裂构造具有明显的主次之分,并对金矿化起着不同的控制作用。其中,破头青断裂为一级控矿构造,它控制了整个金矿田矿脉的空间分布、矿化类型、矿物组合以及矿化深度的规律性变化。玲珑断裂为二级控矿构造,它控制了次级矿脉的富矿段,导致矿脉的斜列及走向变化,其产状对两侧次级矿脉的赋矿标高产生一定的制约。矿田内其他NE—NEE方向的众多断裂为三级控矿构造,它控制了矿体的产出位置、形态、产状等。 相似文献
8.
9.
铜山铜矿F1断裂带构造控矿特征分析 总被引:2,自引:0,他引:2
铜山铜矿主要控矿构造为F1断裂,主矿体的产出部位及产状形态严格受其制约,构造扩容带是矿体赋存的主要空间,通过地质、地球化学等综合研究,对矿区周边部进行了构造预测。 相似文献
10.
烂泥沟金矿区F3控矿断裂特征及构造成矿作用机理探讨 总被引:7,自引:0,他引:7
本文通过烂泥沟金矿区主要控矿断裂F_3的几何形态、内部结构、构造的阐述,及其剪、张、压多次受力、变形与运动特征分析,并从矿与断裂构造的时空等方面论证了构造作用与成矿作用的关系,探讨了构造成矿的机理,提出了构造成矿作用假说。 相似文献
11.
RobertD.JACOBI 《《地质学报》英文版》2003,77(4):491-503
2-D and 3-D densities of fractures are commonly used in mining safety design, natural gas and oil production in fractured reservoirs, and the characterization of subsurface flow and transportation systems in fractured rocks. However, many field data sets are collected in 1-D frequency (f) (e.g., scanlines and borehole data). We have developed an ARC/ INFO-based technology to calculate fracture frequency and densities for a given fracture network. A series of numerical simulations are performed in order to determine the optimal orientation of a scanline, along which the maximum fracture frequency of a fracture network can be obtained. We calculated the frequency (f) and densities (both D1 and D2) of 36 natural fracture trace maps, and investigated the statistical relationship between fracture frequency and fracture density D1, i.e. D1=1.340f+ 0.034. We derived analytical solutions for converting dimensional density (D1) to non-dimensional densities (D2 and D3) assuming that fracture length distribution f 相似文献
12.
13.
裂缝性储层裂缝的阵列侧向测井响应数值模拟 总被引:1,自引:0,他引:1
为了研究裂缝性储层裂缝的阵列侧向测井响应, 采用裂缝组平板裂缝模型, 利用三维有限元方法, 进行不同裂缝参数条件下的高分辨率阵列侧向测井响应数值模拟.表明阵列侧向视电导率和裂缝孔隙度与裂缝流体电导率成线性关系; 低角度裂缝的阵列侧向深浅视电阻率呈现负差异特征, 高角度缝呈现正差异; 相同裂缝孔隙度下, 裂缝密度增加可使得阵列侧向视电阻率增加, 当裂缝密度足够大时, 测井响应特征基本不随裂缝密度发生变化; 交叉缝的测井响应与具有相同角度的平行裂缝组差异明显, 且不同倾角组合的交叉缝的测井响应之间差异明显.阵列侧向测井对裂缝有较强的敏感性, 根据其测井视电阻率大小可以评价裂缝孔隙度, 根据深浅视电阻率的幅度差异可以研究裂缝的产状, 这些为将阵列侧向测井用于裂缝性储层裂缝评价有指导意义. 相似文献
14.
R. D. JACOBI 《《地质学报》英文版》2002,76(1):89-99
Semivariogram is applied to fracture data obtained from detailed scanline surveys of nine field sites in western New York, USA in order to investigate the spatial patterns of natural fractures. The length of the scanline is up to 36 m. How both fracture spacing and fracture length vary with distance is determined through semivariogram calculations. In this study, the authors developed a FORTRAN program to resample the fracture data from the scanline survey. By calculating experimental semivariogram, the authors found five different types of spatial patterns that can be described by linear, spherical, reversed spherical, polynomial I (for a<0) and polynomial II (for a>0) models, of which the last three are newly proposed in this study. The well-structured semivariograms of fracture spacing and length indicate that both the location of the fractures and the length distribution within their structure domains are not random. The results of this study also suggest that semivariograms can provide useful infor 相似文献
15.
Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
16.
为了揭示水压致裂法和巴西劈裂法测量岩石抗拉强度的关系,开展了理论和现场试验研究。基于经典的水压致裂法理论,推导了不同围压下钻孔破裂压力和抗拉强度。利用断裂力学理论建立了水压致裂法和巴西劈裂法测得抗拉强度的关系。利用预制切槽方法模拟天然裂纹,对水力裂缝的起裂压力进行了研究。结果表明:围压为最大主应力等于3倍最小主应力测得的抗拉强度大于围压为0测得的抗拉强度;水压致裂法和巴西劈裂法测量抗拉强度关系与应力场、裂纹长度、断裂韧度3个变量有关;通过在晋城矿区王台铺矿的预制切槽试验,运用断裂力学建立的抗拉强度计算式更为符合现场实际。研究结果可为坚硬难垮落顶板预制切槽的水力压裂设计提供参考。 相似文献
17.
本文对煤岩基本力学性质、煤层水压致裂缝形成条件、裂缝形态以及裂缝开裂角方位等基本理论进行了研究与探讨,通过大量煤岩力学性质测试,证实了试验区目的层煤岩弹性模量低,泊松比较高,脆性大,易破碎,易压缩。文章还得出了目的层煤岩Mohr断裂准则二次抛物线型包络线,煤层水压致裂裂缝形式判断,裂缝开裂角方位的计算公式以及有关结论。 相似文献
18.
油气盆地低渗透储层裂缝预测研究现状及进展 总被引:14,自引:2,他引:12
我国拥有相当数量裂缝型低渗储层的地质储量,在我国油气生产中起举足轻重的作用。系统开展低渗储层中裂缝特征和分布规律研究预测,无疑对我国的低渗透储层油气勘探开发具有指导作用。目前,国内外在油气盆地低渗透储层中对裂缝预测及评价已经形成了很多富有特色的方法,但是由于裂缝成因的复杂性、发育的多阶段性,对低渗储层裂缝的预测及评价研究还处于探索阶段。本文较为系统地综述了油气盆地低渗透储层裂缝预测研究现状与进展、不同成因的裂缝预测方法、裂缝研究存在问题和解决方法。 相似文献
19.
20.
介绍一种定性识别和预测断层相关裂缝的新方法-断面脱空法。该方法以断面脱空理论为基础,通过建立断面脱空空间与断层相关裂缝之间的置换模型,从而实现通过观察断层形迹开展地下断层相关裂缝的定性识别。以塔中Ⅰ号断裂带西侧中古3、塔中72两个井区下奥陶统良里塔格组(O3l)为例,基于地震资料分别开展剖面和平面上的断层相关裂缝识别,并将预测结果与钻井、测井及地震属性分析获得的裂缝发育特征进行对比研究。结果表明:利用断面脱空原理预测结果与钻测井揭示结果基本一致,与根据均方根检测的裂缝平面分布对比,细节上有差异,但总体特征基本一致,表明利用断面脱空原理可以定性地对断层相关裂缝做出预测。断面脱空理论的提出不仅为定性评价地表、地下断层相关裂缝发育分布规律提供一种新思路,更为定量表征断层相关裂缝提供重要的理论依据。 相似文献