首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 406 毫秒
1.
为满足工程需要,设计并实现了一种基于锁相环芯片ADF4360-8的低噪声高稳定度频率合成器.给出了该频率合成器的设计原理、硬件组成、软件设计及其实现方法与流程.重点介绍了一些主要芯片和关键电路.该锁相环频率合成器输出的100 MHz较高频周期信号的峰-峰值达到2.16V,能直接驱动TTL电路.测试结果表明该频率合成器输出的频率信号稳定,噪声低,幅度大.  相似文献   

2.
氢原子钟辅助电子学系统已稳定工作多年,但是与目前的先进技术相比,原来的设计理念已显陈旧,同时暴露出外围电路庞杂、故障点比较多、问题查找困难等诸多问题;运用ARM+FPGA模式对电路进行了改进,其中运用12 bit高精度模数转换芯片实现参数采样,数字化设计改进氢原子钟智能温度控制系统,采用直接数字式频率合成器(Direct Digital Synthesizer,DDS)技术设计产生综合器频率信号,简化设计实现氢原子钟的通信功能;从测试结果来看,提高了参数的采样精度,数字化的智能温控模式实现了温度的自动化智能调整,直接式频率合成器技术简化了设计电路,基于i Coupler磁隔离技术的隔离型RS-232接口收发器设计提高了接口的稳定性;从整体设计来看,大大简化了设计电路,提高了系统性能及可靠性。  相似文献   

3.
锁相环频率合成器中的关键指标和一种优化方法   总被引:1,自引:0,他引:1  
论述了锁相环频率合成器中的几个重要的性能指标:相位噪声,参考杂散和锁定时间,并给出了几条常用的设计准则。最后采用一种优化结构来改进频率合成器的性能,仿真结果证实了这种优化是可行的。  相似文献   

4.
介绍了以国家半导体公司的LMX2306芯片为主要元件,构建的锁相环型振荡器.该设计具有电路简易,输出频率可由计算机实时控制,功耗小,输出稳定等优点.该振荡器用于FAST模型接收机,作为基带混频的本地振荡器.在观测实验中,证明该振荡器工作正常,性能稳定.  相似文献   

5.
详细叙述了四通道自动增益控制器(Automatic Gain Control,AGC)的设计和实现。该AGC具备很高的动态范围(62.75dB)和很宽的输入频带(500MHz),并可用作宽带功率信号的相对检测。首先介绍了设计该AGC的科学目的,着重论述了实现AGC的基本数学原理和电路实现,最后给出了实际电路的测试结果。  相似文献   

6.
为满足精密时间测量和高性能星载原子钟等国家重要研究课题的实验应用需求,研制了主要由AD9956芯片和8位高性能单片机构成的一种DDS(直接数字合成)任意频率合成器。在分析DDS的基本原理和特点的基础上,从硬、软件等方面较为详细地介绍了该频率合成器的设计,对同时完成的专用于控制该合成器工作的计算机应用软件也作了介绍。实际使用结果表明:研制的合成器符合实验使用要求,并对促进课题的研究完成发挥了积极作用。  相似文献   

7.
由于奈奎斯特采样定律的限制,传统的数字化精密频率测量设备难以对频率较高的信号进行高精度的精密频率测量.作者研制了一种宽范围数字化精密频率测量系统,能够通过基于频谱分析的粗测过程和基于欠采样的精测过程,克服奈奎斯特定律的限制.实验表明,该宽范围数字化精密频率测量系统对于10 MHz信号的测量(相对)频率偏差为1.13×10-11,测量稳定度达到1×10-12量级.  相似文献   

8.
为了进一步实现铷原子频标小型化,分析了几种典型的锁相环调频电路及其特点,设计了一种锁相环二进制移频键控2FSK(binary frequency shift keying)调频方案,给出了调频信号的频谱测试结果。该调频方案已成功地应用在小型化数字式铷原子频标中,能够满足小型化铷原子频标的要求。  相似文献   

9.
介绍了一种快速双口RAM芯片 IDT7026的结构特点和功能,并将其应用于低频时码信号采集系统中,从而实现了DSP(数字信号处理器)和单片机进行快速数据传输和数据共享的任务。给出了通过该芯片进行DSP和单片机通信的具体接口电路,并针对低频时码信号采集系统中交换数据的仲裁方式,提出了令牌传递和软件判优两种实现方法。  相似文献   

10.
在有源电视时频发播中,329行插入了48周1MHz标准频率信号,重复周期为40ms.对于这种信号,在接收端用锁相环路恢复标准频率时,不能使用普通的鉴相器,必须用采样保持鉴相器。本文介绍采样保持鉴相器的工作原理,有源电视同步中采样保持鉴相器锁相环的详细方框图,并给出了一些实验结果.  相似文献   

11.
Laura Schaefer 《Icarus》2004,169(1):216-241
We modified the MAGMA chemical equilibrium code developed by Fegley and Cameron (1987, Earth Planet. Sci. Lett. 82, 207-222) and used it to model vaporization of high temperature silicate lavas on Io. The MAGMA code computes chemical equilibria in a melt, between melt and its equilibrium vapor, and in the gas phase. The good agreement of MAGMA code results with experimental data and with other computer codes is demonstrated. The temperature-dependent pressure and composition of vapor in equilibrium with lava is calculated from 1700 to 2400 K for 109 different silicate lavas in the ONaKFeSiMgCaAlTi system. Results for five lavas (tholeiitic basalt, alkali basalt, Barberton komatiite, dunite, and a molten type B1 Ca, Al-rich inclusion) are discussed in detail. The effects of continuous fractional vaporization on chemistry of these lavas and their equilibrium vapor are presented. The predicted abundances (relative to Na) of K, Fe, Si, Al, Ca, and Ti in the vapor equilibrated with lavas at 1900 K are lower than published upper limits for Io's atmosphere (which do not include Mg). We predict evaporative loss of alkalis, Fe, and Si during volcanic eruptions. Sodium is more volatile than K, and the Na/K ratio in the gas is decreased by fractional vaporization. This process can match Io's atmospheric Na/K ratio of 10±3 reported by Brown (2001, Icarus 151, 190-195). Silicon monoxide is an abundant species in the vapor above lavas. Spectroscopic searches are recommended for SiO at IR and mm wavelengths. Reactions of metallic vapors with S- and Cl-bearing volcanic gases may form other unusual gases including MgCl2, MgS, MgCl, FeCl2, FeS, FeCl, and SiS.  相似文献   

12.
13.
正Research in Astronomy and Astrophysics publishes original research papers and reviews on all branches of astronomy and astrophysics.Reviews are by invitation only.Important new results that require rapid publication can be submitted as a Letter(Letters must be restricted in length to 6 printed pages).Authors who submit a paper are expected to be able to certify that the paper is original work,  相似文献   

14.
15.
Laura Schaefer 《Icarus》2005,173(2):454-468
We use chemical equilibrium calculations to model the speciation of alkalis and halogens in volcanic gases emitted on Io. The calculations cover wide temperature (500-2000 K) and pressure (10−6 to 10+1 bars) ranges, which overlap the nominal conditions at Pele (T=1760 K, P=0.01 bars). About 230 compounds of 11 elements (O, S, Li, Na, K, Rb, Cs, F, Cl, Br, I) are considered. The elemental abundances for O, S, Na, K, and Cl are based upon observations. CI chondritic elemental abundances relative to sulfur are used for the other alkalis and halogens (as yet unobserved on Io). We predict the major alkali species in Pele-like volcanic gases and the percentage distribution of each alkali are LiCl (73%), LiF (27%); NaCl (81%), Na (16%), NaF (3%); KCl (91%), K (5%), KF (4%); RbCl (93%), Rb (4%), RbF (3%); CsCl (92%), CsF (6%), Cs (2%). Likewise the major halogen species and the percentage distribution of each halogen are NaF (88%), KF (10%), LiF (2%); NaCl (89%), KCl (11%); NaBr (89%), KBr (10%), Br (1%); NaI (61%), I (30%), KI (9%). We predict the major halogen condensates and their condensation temperatures at P=0.01 bar are NaF (1115 K), LiF (970 K); NaCl (1050 K), KCl (950 K); KBr (750 K), RbBr (730 K), CsBr (645 K); and solid I2 (200 K). We also model disequilibrium chemistry of the alkalis and halogens in the volcanic plume. Based on this work and our prior modeling for Na, K, and Cl in a volcanic plume, we predict the major loss processes for the alkali halide gases are photolysis and/or condensation onto grains. Their estimated photochemical lifetimes range from a few minutes for alkali iodides to a few hours for alkali fluorides. Condensation is apparently the only loss process for elemental iodine. On the basis of elemental abundances and photochemical lifetimes, we recommend searching for gaseous KCl, NaF, LiF, LiCl, RbF, RbCl, CsF, and CsCl around volcanic vents during eruptions. Based on abundance considerations and observations of brown dwarfs we also recommend a search of Io's extended atmosphere and the Io plasma torus for neutral and ionized Li, Cs, Rb, and F.  相似文献   

16.
17.
A special stressed annular polishing technique is proposed to mill the off-axis aspheric sub-mirrors of a large segmented mirror with an annular polishing machine. Based on the basic principle of stressed annular polishing technique, a set of special stressing mechanisms are designed to convert milling the aspheric surfaces of sub-mirrors with different off-axis distances into milling the spherical surfaces with identical radii of curvature, so that they can be pol- ished simultaneously on a continuous polishing machine. It took about contin- uous 40 hours to polish a scaled-down mirror of the planning Chinese Future Giant Telescope (CFGT) using this technique. This mirror has the 330 mm di- ameter, 3.6 m off-axis distance, and the 21.6 m radius of curvature, and its max- imum asphericity is 16 micron. The experiment shows that this method has a high effciency, suits batch manufacturing, especially the batch manufacturing of aspheric sub-mirrors of the segmented primary mirror of an extremely large aperture telescope.  相似文献   

18.
In this paper, we investigate the dynamics of Born–Infeld (B–I) phantom model in the ωω′ plane, which is defined by the equation of state parameter for the dark energy and its derivative with respect to N (the logarithm of the scale factor a). We find the scalar field equation of motion in ωω′ plane, and show mathematically the property of attractor solutions which correspond to ω φ ∼−1, Ω φ =1, which avoid the “Big rip” problem and meets the current observations well.   相似文献   

19.
In astronomical observations at optical wavelengths, a fast image tracking system can be adopted to reduce the effects of the atmospheric seeing and telescopic tracking error, and therefore improve the observing efficiency. Aiming at the need of astronomical observations, totally 5 kinds of algorithms in two categories were selected to make a comparative study on their accuracies and stabilities under different noise conditions by both numerical experiment and laboratory test. The results indicate that the normalized cross-correlation method and barycenter method have not only a higher accuracy but also a better reliability against interferences, they will be applied to the high-resolution spectrograph of the Xinglong 2.16 m telescope and the scienti?c instruments of the SONG (Stellar Observations Network Group) project, respectively.  相似文献   

20.
A combined BCDE (Brans-Dicke and Einstein-Cartan) theory with lambda-term is developed through Raychaudhuri’s equation, for inflationary scenario. It involves a variable cosmological constant, which decreases with time, jointly with energy density, cosmic pressure, shear, vorticity, and Hubble’s parameter, while the scale factor, total spin and scalar field increase exponentially. The post-inflationary fluid resembles a perfect one, though total spin grows, but the angular speed does not (Astrophys. Space Sci. 312: 275, 2007d).   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号