共查询到20条相似文献，搜索用时 46 毫秒
1.
《Gondwana Research》2014,25(3-4):936-945
Body wave seismic tomography is a successful technique for mapping lithospheric material sinking into the mantle. Focusing on the India/Asia collision zone, we postulate the existence of several Asian continental slabs, based on seismic global tomography. We observe a lower mantle positive anomaly between 1100 and 900 km depths, that we interpret as the signature of a past subduction process of Asian lithosphere, based on the anomaly position relative to positive anomalies related to Indian continental slab. We propose that this anomaly provides evidence for south dipping subduction of North Tibet lithospheric mantle, occurring along 3000 km parallel to the Southern Asian margin, and beginning soon after the 45 Ma break-off that detached the Tethys oceanic slab from the Indian continent. We estimate the maximum length of the slab related to the anomaly to be 400 km. Adding 200 km of presently Asian subducting slab beneath Central Tibet, the amount of Asian lithospheric mantle absorbed by continental subduction during the collision is at most 600 km. Using global seismic tomography to resolve the geometry of Asian continent at the onset of collision, we estimate that the convergence absorbed by Asia during the indentation process is ~ 1300 km. We conclude that Asian continental subduction could accommodate at most 45% of the Asian convergence. The rest of the convergence could have been accommodated by a combination of extrusion and shallow subduction/underthrusting processes. Continental subduction is therefore a major lithospheric process involved in intraplate tectonics of a supercontinent like Eurasia. 相似文献
2.
The lithospheric sinking along subduction zones is part of the mantle convection. Therefore, computing the volume of lithosphere recycled within the mantle by subducting slabs quantifies the equivalent amount of mantle that should be displaced, for the mass conservation criterion. The rate of subduction is constrained by the convergence rate between upper and lower plates and the motion of the subduction hinge H that may either converge or diverge relative to the upper plate. Here, starting from the analysis of the slab hinge kinematics, we evaluate the subduction rate at 31 subduction zones worldwide, useful to compute volumes of sinking lithosphere into the mantle. Our results show that ∼190 km3/yr and ∼88 km3/yr of lithospheric slabs are currently subducting below H-divergent and H-convergent subduction zones, respectively. We also propose supporting numerical models providing asymmetric volumes of the subducted lithosphere, using the subduction rate instead of plate convergence, as boundary condition. Furthermore, H-divergent subduction zones appear to be coincident with subductions having “westward”-directed slabs, whereas H-convergent subduction zones are mostly compatible with those that have “eastward-to-northeastward”-directed slabs. On the basis of this geographical polarity, our lithospheric volume estimation gives ∼214 km3/yr and ∼88 km3/yr of subducting lithosphere, respectively. This entails that W-directed subduction zones contribute more than twice in lithospheric sinking into the mantle with respect to E-to-NE-directed ones. In accordance with the conservation of mass principle, this volumetric asymmetry in the mantle suggests a displacement of ∼120 km3/yr of mantle material from west to east, providing a constraint for global asymmetric mantle convection. 相似文献
3.
《Gondwana Research》2010,17(3-4):401-413
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle. 相似文献
4.
F. Cella S. de Lorenzo M. Fedi M. Loddo F. Mongelli A. Rapolla G. Zito 《Tectonophysics》2006,412(1-2):27-47
The gravity anomaly field of the Tyrrhenian basin and surrounding regions reflects the complex series of geodynamic events active in this area since the Oligocene–Miocene. They can resume in lithospheric thinning and asthenospheric rising beneath the Tyrrhenian Basin, coexisting with the roll-back subduction of the African plate margin westward sinking beneath the Calabrian Arc. The geographic closeness between these processes implies an intense perturbation of the mantle thermal regime and an interference at regional scale between the related gravity effects.A model of the litho-asthenospheric structure of this region is suggested, showing a reasonable agreement with both the evidences in terms of regional gravity anomaly pattern and the results concerning thermal state and petro-physical features of the mantle. The first phase of this study consisted of the computation of the isotherms in the crust–mantle system beneath the Tyrrhenian Basin and, afterwards, of the density distribution within the partially melted upwelling asthenosphere. The second phase consisted of a temperature/density modelling of the slab subducting beneath the Calabrian Arc. Finally, a 21 / 2 interpretation of gravity data was carried out by including as constraints the results previously obtained. Thus, the final result depicts a model matching both gravity, thermal and petrographic data. They provide (a) a better definition of the thermal regime of the passive mantle rise beneath the Tyrrhenian basin by means of the estimation of the moderate asthenospheric heating and (b) a model of lithospheric slab subducting with rates that could be smaller than generally suggested in previous works. 相似文献
5.
Deep slab subduction and dehydration and their geodynamic consequences: Evidence from seismology and mineral physics 总被引：14，自引：9，他引：5
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle. 相似文献
6.
To better understand how active deformation localizes within a continental plate in response to extensional and transtensional tectonics, a combined analysis of high-quality gravity (Bouguer anomaly) and seismicity data is presented consisting of about 35000 earthquakes recorded in the Baikal Rift Zone. This approach allows imaging of deformation patterns from the surface down to the Moho. A comparison is made with heat flow variations in order to assess the importance of lithospheric rheology in the style of extensional deformation. Three different rift sectors can be identified. The southwestern rift sector is characterized by strong gravity and topography contrasts marked by two major crustal faults and diffuse seismicity. Heat flow shows locally elevated values, correlated with recent volcanism and negative seismic P-velocity anomalies. Based on earthquake fault plane solutions and on previous stress field inversions, it is proposed that strain decoupling may occur in this area in response to wrench-compressional stress regime imposed by the India–Asia collision. The central sector is characterized by two major seismic belts; the southernmost one corresponds to a single, steeply dipping fault accommodating oblique extension; in the centre of lake Baikal, a second seismic belt is associated with several dip-slip faults and subcrustal thinning at the rift axis in response to orthogonal extension. The northern rift sector is characterized by a wide, low Bouguer anomaly which corresponds to a broad, high topographic dome and seismic belts and swarms. This topography can be explained by lithospheric buoyancy forces possibly linked to anomalous upper mantle. At a more detailed scale, no clear correlation appears between the surficial fault pattern and the gravity signal. As in other continental rifts, it appears that the lithospheric rheology influences extensional basins morphology. However, in the Baikal rift, the inherited structural fabric combined with stress field variations results in oblique rifting tectonics which seem to control the geometry of southern and northeastern rift basins. 相似文献
7.
The assessment of seismic activity in the shallow continental mantle has long been hindered by the low resolution of both seismic imaging and earthquake locations in young collision zones. Here, we combine the most recent and high-resolution image of the lithospheric structure of the Western Alps with a high quality dataset of anomalously deep earthquakes recorded in the same area in the past 25 yrs. We show that these earthquakes are aligned on an active lithospheric strike-slip fault, and we provide evidence that this fault is located in the mantle wedge beneath the Adriatic Moho. Our results: (i) provide direct evidence that deep material can be seismogenic or not depending on the lithology; (ii) confirm the role of serpentinization in favoring the aseismic creep of mantle rocks; and (iii) demonstrate that the upper mantle can be stiff and seismogenic not only in cold cratons, but also in young orogenic belts. 相似文献
8.
最近的地震探测表明，在西昆仑和塔里木结合带有岩石圈根存在。据此，本文提出地壳均衡与岩石圈根拖曳共同作用导致“山隆盆降”的动力学机制假说。利用新近中英合作完成的有限元粘弹塑构造数据模拟技术FEVPLIB，模拟研究了青藏高原西部横过西昆仑和塔里木结合带剖面的这一动力学深化过程。这种模式既能解释高原隆升，又能解释边缘沉积盆地的成因。模拟结果表明，两个大陆碰撞到一起，当岩石圈根一旦形成以后，造山水平挤压力主要来源于岩石圈根的向下拖曳，而印度板块向北挤压沦为次要因素。 相似文献
9.
P-wave velocities in the Tyrrhenian mantle have been determined for the 230–480 km depth range. Analysis of P-wave travel times for a set of Tyrrhenian deep earthquakes gives a velocity-distribution law which shows different behaviours in the 230–300 km and 300–480 km depth intervals. For the first interval the velocity gradient is 0.64 · 10−2 sec−1 and for the second one it is 0.59 · 10−2 sec−1. At a depth of 300 km the velocity decreases rapidly from 8.75 to 8.43 km/sec.The results have been analyzed in the framework of a Tyrrhenian structural model characterized by a lithospheric slab dipping 55–60° in the WNW direction.It is also pointed out that the analysis of some geodynamic features of the slabs of Pacific island arcs carried out by Oliver et al. (1973) and Sleep (1973) can be applied to the Tyrrhenian mantle geodynamic features. 相似文献
10.
The Uralide orogen, in Central Russia, is the focus of intense geoscientific investigations during recent years. The international research is motivated by some unusual lithospheric features compared with other collisional belts including the preservation of (a) a collisional architecture with an orogenic root and a crustal thickness of 55–58 km, and (b) large volumes of very low-grade and non-metamorphic oceanic crust and island arc rocks in the upper crust of a low–relief mountain belt. The latter cause anomalous gravity highs along the thickened crust and the isostatic equilibrium inside the Uralides lithosphere as well as the overthrust high-metamorphic rocks. The integrated URSEIS '95 seismic experiment provides fundamentally new data revealing the lithospheric architecture of an intact Paleozoic collisional orogen that allows the construction of density models. In the Urals' lithosphere different velocity structures resolved by wide-angle seismic experiments along both the URSEIS '95- and the Troitsk profile. They can be used to constrain lithospheric density models: a first model consists of a deep subducted continental lower crust which has been highly eclogitized at depths of 60–90 km to a density of 3550 kg/m3. The second model shows a slightly eclogitized lower crust underlying the Uralide orogen with a crustal thickness of 60 km. The eclogitized lower crust causes a too-small impedance contrast to the lithospheric mantle resulting in a lack of reflectors in the area of the largest crustal thickness. Both models fit the measured gravity field. Analyzing the isostatic state of the southern Urals' lithosphere, both density models are in isostatic equilibrium. 相似文献
11.
Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan) 总被引：1，自引：0，他引：1
Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs. 相似文献
12.
Margins of old continental lithosphere are likely prone to ongoing modification processes. Therefore, constraining detailed structures beneath the margin can be essential in understanding the evolution of the continental lithosphere. The eastern margin of the Eurasian plate is a natural laboratory that allows us to study the strong effects from multiple episodes of continental collision and subduction of different oceanic plates since their formation. To reveal the detailed evolution of cratons at their margins, we describe, for the first time, the upper mantle structures beneath the southern Korean Peninsula (SKP) based strictly on teleseismic relative arrival time data from densely deployed local seismic arrays, which allows us to constrain the details of the lithospheric structures beneath the Archean-Proterozoic basement. We imaged a thick (~150 km) high-velocity anomaly mainly beneath the Proterozoic Yeongnam Massif with large velocity contrasts (dlnVp ≈ 4.0% and dlnVs ≈ 6.0%) at its boundaries, suggesting the presence of a long-lasting cratonic root in the southwestern SKP. On the other hand, low-velocity anomalies were found beneath the Proterozoic Gyeonggi Massif, Gyeongsang arc-back-arc basin, and along the eastern margin of the SKP, indicating significantly modified regions. The possible existence of a remnant cratonic root beneath the SKP and contrasting lithospheric structures across the different Precambrian massifs suggests the highly heterogeneous modification of cratonic lithosphere at the eastern Eurasian plate margin. Strong velocity reductions, which indicate a thermally elevated upper mantle potentially with partial melts, correspond to areas of Cenozoic basalts, high surface heat flow, and high topography along the eastern KP margin. We interpret this coincidence as a result of recent reactivation of a craton margin, which is controlled by intense interaction between the convective upper mantle and heterogeneous continental lithosphere. 相似文献
13.
B. Homuth U. Löbl A. G. Batte K. Link C. M. Kasereka G. Rümpker 《International Journal of Earth Sciences》2016,105(6):1681-1692
Shear-wave splitting measurements from local and teleseismic earthquakes are used to investigate the seismic anisotropy in the upper mantle beneath the Rwenzori region of the East African Rift system. At most stations, shear-wave splitting parameters obtained from individual earthquakes exhibit only minor variations with backazimuth. We therefore employ a joint inversion of SKS waveforms to derive hypothetical one-layer parameters. The corresponding fast polarizations are generally rift parallel and the average delay time is about 1 s. Shear phases from local events within the crust are characterized by an average delay time of 0.04 s. Delay times from local mantle earthquakes are in the range of 0.2 s. This observation suggests that the dominant source region for seismic anisotropy beneath the rift is located within the mantle. We use finite-frequency waveform modeling to test different models of anisotropy within the lithosphere/asthenosphere system of the rift. The results show that the rift-parallel fast polarizations are consistent with horizontal transverse isotropy (HTI anisotropy) caused by rift-parallel magmatic intrusions or lenses located within the lithospheric mantle—as it would be expected during the early stages of continental rifting. Furthermore, the short-scale spatial variations in the fast polarizations observed in the southern part of the study area can be explained by effects due to sedimentary basins of low isotropic velocity in combination with a shift in the orientation of anisotropic fabrics in the upper mantle. A uniform anisotropic layer in relation to large-scale asthenospheric mantle flow is less consistent with the observed splitting parameters. 相似文献
14.
Ultrapotassic lamproitic rocks in the Western Alps, Tuscany‐Corsica and SE Spain (c. 30 to 1 Ma) show high MgO, Ni and Cr denoting a mantle origin, but also have incompatible element and radiogenic isotope abundances that resemble upper crustal rocks, such as local metapelites and global subducting sediments. The coexistence of mantle and crustal signatures in lamproites indicates a genesis in a lithospheric mantle, which had been contaminated by crustal rocks. The occurrence of lamproitic magmatism along the Alpine collision front suggests that mantle contamination occurred during east‐verging Cretaceous‐Oligocene subduction of the European plate beneath the African margin. We suggest that crustal material originated from the overriding continental margin, which was eroded by the low‐angle subducting European slab. Mantle melting and generation of lamproites took place later, during diachronous opening of Western Mediterranean basins, contemporaneously with a new cycle of magmatism, which was genetically related to the west‐north‐dipping Apennine‐Maghrebian subduction. 相似文献
15.
Petrogenesis and tectonic setting of the Roman Volcanic Province, Italy 总被引：11，自引：0，他引：11
The volcanism in the Roman Province of Italy can be modelled by the partial melting of heterogeneously enriched mantle sources. The heterogeneity was created by materials derived from a subducted slab which can still be traced geophysically beneath the central Apennines.
New petrographical and chemical data are presented for the high-K calc-alkaline and the shoshonitic volcanics of the Campania region. Primary magmas are present only locally. The existence of spatial zonation in the volcanism of Campania is documented for the first time. The shoshonitic, leucite-basanitic and leucititic volcanics of the Phlegraean Fields-Procida-Ischia and the Somma-Vesuvius areas are, at similar degrees of evolution, about two times richer in Nb and Ba than those of northwestern Campania and the Latium part of the Roman Province. Accordingly, distinct north-western and south-eastern subprovinces can be defined. The evaluation of enrichment factors, that is the abundance ratio between the average contents of each element in the relatively primitive lavas of the low K- and the high K suites, shows that the mantle sources prior to K-metasomatism were different in the two sub-provinces of the Roman Province. In the north-western one, they resembled the sources of ocean-island tholeiites and moderately enriched MOR-basalts. In the south-east they were similar to those of ocean island alkaline lavas and enriched MORB's.
Modelling based on K, P, Ce, Sr, Rb, Ba, Th, Sm, Eu, Gd, Y, Nb and 87Sr/86Sr was carried out. It indicates that the range of mantle sources of the volcanics in northwestern Campania and Latium can be modelled by the addition of 3 to 20% of materials derived by partial melting of carbonaceous pelites to a Sr-enriched mantle wedge comparable to the Honolulu mantle source least enriched in Nb.
The production of Sr-enriched mantle wedge requires either the action of fluids produced by dehydration of subducted oceanic crust, or a small amount of metasomatism caused by the presence of carbonatite melts.
The near absence of Ti, Ta, Nb, Yb and the highly fractionated REE in the metasomatizing component requires the presence of residual garnet and accessory Ti-rich minerals during the partial melting of the subducted sediments. The writers propose that the mantle wedge overlying the subducted slab was hybridized by melts produced by partial fusion of subducted material derived from the continental crust, probably sediments. This process played a dominant role in the generation of the mantle sources from which the high-K calc-alkaline, shoshonitic, leucite-basanitic and leucititic magmas of the Roman Province were derived. 相似文献
16.
大陆岩石圈有效弹性厚度与有关地球物理参数的关系--以泉州-黑水地学断面为例 总被引：1，自引：0，他引：1
大陆岩石圈有效弹性厚度(Te)是反映岩石圈综合强度的参数,它反映了岩石圈的整体特征。分析岩石圈有效样性厚度与反映深部地质特征的有关地球物理参数之间的关系,对研究控制Te的因素、各因素之间的关系以及探索大陆构造与大陆动力学等具有重要意义。泉州一黑水地学断面Te与地壳厚度、热岩石圈厚度、均衡重力异常、磁性构造层底面深度、上地幔低速层顶界面深度、上地幔低阻层顶面深度之间的关系研究表明：Te与大地热流关系密切的“热”地球物理参数磁性构造层底面深度、热岩石圈厚度相关性好;与地壳厚度有一定的相关性;上地幔低速层顶界面深度和上地幔低阻层顶面深度与大陆岩石圈Te相关性均较差。 相似文献
17.
The occurrence of great earthquakes in the northwestern circum-Pacific belt is explained systematically in terms of the interaction between the oceanic and continental lithospheres. The great earthquakes in the Alaska-Aleutian region are considered to be a result of a rebound of the continental lithosphere which is dragged by the underthrusting oceanic lithosphere. The largest earthquakes in the Japan region are about one order of magnitude smaller than those in the Alaska-Aleutian region. This is interpreted as due to the weakening of the continental lithosphere caused by a frictional heating at the interface between the oceanic and the continental lithospheres. When the friction becomes very small because of the subsequent heating, a tensile force begins to prevail in the oceanic lithosphere. This tensile force is caused by a gravitational pull exerted by the sinking lithosphere. When this tensile stress surpasses the strength of the lithosphere, a large-scale normal fault occurs which extends through the entire thickness of the lithosphere. The intermittent slippages of the lithosphere on this fault plane are observed as great normal-fault earthquakes. The Sanriku earthquake of 1933 represents one of these earthquakes. The normal faulting accounts for the sharp bend of the lithosphere at the trench and the rapid increase of the dip angle of the deep seismic zone in going from northern Japan to the Izu-Bonin region. After repeated slippages, the sinking lithosphere becomes detached from the oceanic lithosphere and no further lithospheric interaction can take place. This picture is consistent with the complete lack of great shallow earthquakes in the Izu-Bonin region. 相似文献
18.
青藏高原板内地震震源深度分布规律及其成因 总被引：6，自引：0，他引：6
青藏高原板内地震以浅源地震为主, 下地壳基本上没有地震, 地震震源多集中在15~40 km的深度范围, 主要在中地壳内, 呈似层状弥散分布.其中30~33 km深度是一个优势层, 与壳内分层有关.总体上青藏高原南、北部的震源面略呈相向倾斜特征.70~100 km深度区间出现了比较集中的震级较小的地震, 可能与壳幔过渡带的拆离作用有关.高原内部的正断层系与板内地震密切相关, 是板内浅源地震的主控构造.总之, 青藏高原地震震源沿着活动的上地壳脆性层与软弱层之间的脆-韧性过渡带分布.这些板内地震活动属于大陆动力学过程, 与板块碰撞和板块俯冲无关.初步认为青藏高原浅层到深层多震层的成因分别是韧性基底与脆性盖层、韧性下地壳与脆性上地壳、韧性下地壳与脆性上地幔的韧-脆性转换、拆离和解耦的产物. 相似文献
19.
Convergent margins, being the boundaries between colliding lithospheric plates, form the most disastrous areas in the world due to intensive, strong seismicity and volcanism. We review global geophysical data in order to illustrate the effects of the plate tectonic processes at convergent margins on the crustal and upper mantle structure, seismicity, and geometry of subducting slab. We present global maps of free-air and Bouguer gravity anomalies, heat flow, seismicity, seismic Vs anomalies in the upper mantle, and plate convergence rate, as well as 20 profiles across different convergent margins. A global analysis of these data for three types of convergent margins, formed by ocean–ocean, ocean–continent, and continent–continent collisions, allows us to recognize the following patterns. (1) Plate convergence rate depends on the type of convergent margins and it is significantly larger when, at least, one of the plates is oceanic. However, the oldest oceanic plate in the Pacific ocean has the smallest convergence rate. (2) The presence of an oceanic plate is, in general, required for generation of high-magnitude (M > 8.0) earthquakes and for generating intermediate and deep seismicity along the convergent margins. When oceanic slabs subduct beneath a continent, a gap in the seismogenic zone exists at depths between ca. 250 km and 500 km. Given that the seismogenic zone terminates at ca. 200 km depth in case of continent–continent collision, we propose oceanic origin of subducting slabs beneath the Zagros, the Pamir, and the Vrancea zone. (3) Dip angle of the subducting slab in continent–ocean collision does not correlate neither with the age of subducting oceanic slab, nor with the convergence rate. For ocean–ocean subduction, clear trends are recognized: steeply dipping slabs are characteristic of young subducting plates and of oceanic plates with high convergence rate, with slab rotation towards a near-vertical dip angle at depths below ca. 500 km at very high convergence rate. (4) Local isostasy is not satisfied at the convergent margins as evidenced by strong free air gravity anomalies of positive and negative signs. However, near-isostatic equilibrium may exist in broad zones of distributed deformation such as Tibet. (5) No systematic patterns are recognized in heat flow data due to strong heterogeneity of measured values which are strongly affected by hydrothermal circulation, magmatic activity, crustal faulting, horizontal heat transfer, and also due to low number of heat flow measurements across many margins. (6) Low upper mantle Vs seismic velocities beneath the convergent margins are restricted to the upper 150 km and may be related to mantle wedge melting which is confined to shallow mantle levels. 相似文献
20.
The Tyrrhenian Sea is a Neogene back-arc basin formed by continental extension at the rear of the eastward migrating Apennine subduction system. Its central part, generated from Tortonian to Pliocene, includes the Sardinia rifted margin to the west, an area with large volcanoes in the deep central sector, and the Campania rifted margin to the east. A reprocessing of some 2000 km of MCS lines, a new swath bathymetric map, and a review of previous geological and geophysical data allow to analyse the nature and distribution of continental vs. oceanic crust in this area, which evolved in a short time span.The central portion of the southern Tyrrhenian Sea is characterized by MOHO at about 10 km depth. North of Magnghi and Vavilov Smts, this thinned crustal domain include a wide continent–ocean transition, with the occurrence of extensional allochthons and of serpenitinzed sub-continental mantle, recalling other well known rifted margins, as the Iberia one. Sectors floored by oceanic crust should occur, mainly in the southern part of the study area, but they do not appear related to discrete spreading ridges. The continent–ocean boundary cannot be drawn unequivocally in the area, due also to the occurrence of widespread and huge magmatic manifestations not related to oceanic spreading. These portions of the southern Tyrrhenian Sea represents therefore a complex oceanic back-arc basin surrounded by magma-rich rifted continental margins.The abundant igneous manifestations and the very high stretching rates observed in the area may be related to the fact that the present Tyrrhenian area was occupied by an orogenic domain affected by shortening until middle Miocene times, which is just before the Late Miocene onset of back-arc extension. The lithosphere in the region had then to be rheologically weak. Abundant generation and ascent of magmas, mostly of Ocean Island Basalt type, was favoured by the large lithospheric permeability induced by strong extensional deformations. 相似文献