首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The divergent plate boundary in Iceland is characterized by 40–80 km long and 5–10 km wide swarms of tension fractures (∼102 m long) and normal faults (∼103 m long). The upper part of the crust is mainly composed of lava flows, with abundant columnar joints that are mostly perpendicular to the lava contacts. The lava flows are horizontal at the surface of the rift zone but become tilted at the rate of 1° for every 150 m depth in the crust. At the surface of the rift zone the joints are vertical and parallel to the vertical principal stress. Because of tilting of the lava pile, the columnar joints become oblique to this stress, hence becoming potential shear fractures, and form echelon sets at greater depths in the crust. Theoretical considerations suggest that normal faults start to nucleate on sets of en echelon columnar joints and/or large-scale tension fractures at crustal depths of 0.5–1.5 km. The width (depth) must be the smallest (controlling) dimension of many faults. Nevertheless, there is a positive linear relation (r = 0.91) between maximum throw and length of the Holocene faults. If the faults grow as self-similar structures, the throw-length relationship can be explained by a similar relation between fault length and width.  相似文献   

2.
The Lachlan Fold Belt has the velocity‐depth structure of continental crust, with a thickness exceeding 50 km under the region of highest topography in Australia, and in the range 41–44 km under the central Fold Belt and Sydney Basin. There is no evidence of high upper crustal velocities normally associated with marginal or back‐arc basin crustal rocks. The velocities in the lower crust are consistent with an overall increase in metamorphic grade and/or mafic mineral content with depth. Continuing tectonic development throughout the region and the negligible seismicity at depths greater than 30 km indicate that the lower crust is undergoing ductile deformation.

The upper crustal velocities below the Sydney Basin are in the range 5.75–5.9 km/s to about 8 km, increasing to 6.35–6.5 km/s at about 15–17 km depth, where there is a high‐velocity (7.0 km/s) zone for about 9 km evident in results from one direction. The lower crust is characterised by a velocity gradient from about 6.7 km/s at 25 km, to 7.7 km/s at 40–42 km, and a transition to an upper mantle velocity of 8.03–8.12 km/s at 41.5–43.5 km depth.

Across the central Lachlan Fold Belt, velocities generally increase from 5.6 km/s at the surface to 6.0 km/s at 14.5 km depth, with a higher‐velocity zone (5.95 km/s) in the depth range 2.5–7.0 km. In the lower crust, velocities increase from 6.3 km/s at 16 km depth to 7.2 km/s at 40 km depth, then increase to 7.95 km/s at 43 km. A steeper gradient is evident at 26.5–28 km depth, where the velocity is about 6.6—6.8 km/s. Under part of the area an upper mantle low‐velocity zone in the depth range 50–64 km is interpreted from strong events recorded at distances greater than 320 km.

There is no substantial difference in the Moho depth across the boundary between the Sydney Basin and the Lachlan Fold Belt, consistent with the Basin overlying part of the Fold Belt. Pre‐Ordovician rocks within the crust suggest fragmented continental‐type crust existed E of the Precambrian craton and that these contribute to the thick crustal section in SE Australia.  相似文献   

3.
Equilibrium melt trace element contents are calculated from Proterozoic Nain Plutonic Suite (NPS) mafic and anorthositic cumulates, and from plagioclase and orthopyroxene megacrysts. Assumed trapped melt fractions (TMF) <20% generally eliminate all minor phases in most mafic cumulate rocks, reducing them to mixtures of feldspar, pyroxene and olivine, which would represent the high-temperature cumulus assemblage. In anorthosites, TMF <15% generally reduce the mode to a feldspar-only assemblage. All model melts have trace element profiles enriched in highly incompatible elements relative to normal mid-ocean ridge basalt (NMORB); commonly with negative Nb and Th anomalies. Most mafic cumulates yield similar profiles with constant incompatible element ratios, and can be linked through fractional crystallization. High K-La subtypes probably represent crust-contaminated facies. Mafic cumulates are inferred to belong to a tholeiitic differentiation series, variably contaminated by upper and lower crustal components, and probably related to coeval tholeiitic basaltic dyke swarms and lavas in Labrador. Model melts from anorthosites and megacrysts have normalized trace element profiles with steeper slopes than those calculated from mafic cumulates, indicating that mafic cumulates and anorthosites did not crystallize from the same melts. Orthopyroxene megacrysts yield model melts that are more enriched than typical anorthositic model melts, precluding an origin from parental melts. Jotunites have lower K-Rb-Ba-Y-Yb and higher La-Ce than model residues from fractionation of anorthositic model melts, suggesting they are not cosanguineous with them, but provide reasonable fits to evolved mafic cumulate model melts. Incompatible element profiles of anorthositic model melts closely resemble those of crustal melts such as tonalites, with steep Y-Yb-Lu segments that suggest residual garnet in the source. Inversion models yield protoliths similar to depleted lower crustal granulite xenoliths with aluminous compositions, suggesting that the incompatible trace element budget of the anorthosites are derived from remobilization of the lower crust. The similarity of the highly incompatible trace elements and LILE between anorthositic and mafic cumulate model melts suggests that the basalts parental to the mafic cumulates locally assimilated considerable quantities of the same crust that yielded the anorthosites. The reaction between underplating basalt and aluminous lower crust would have forced crystallization of abundant plagioclase, and remobilization of these hybrid plagioclase-rich mushes then produced the anorthosite massifs.  相似文献   

4.
青藏高原东南部作为板块碰撞的前缘地带一直是地球科学研究的热点,为了揭示碰撞前缘地带地壳结构特征,作者 利用布设在中国青藏高原东南部的38个宽频带流动台站记录的2487条远震P波接收函数,采用接收函数CCP叠加（共转换点 叠加）和H-κ叠加两种方法获得了研究区域详细的地壳厚度图像和泊松比值。研究结果显示：两种方法获得的地壳厚度特征 具有较好的一致性;青藏高原东南部地壳厚度存在明显的东西差异和南北差异;喜马拉雅构造区内莫霍面深度变化较大, 介于65~80 km之间;拉萨地体内莫霍面深度介于72~80 km之间;雅鲁藏布缝合带两侧地壳厚度突变,缝合带北侧和南侧地 壳厚度相差约8 km。研究区域平均泊松比值较小,为0.24,和大多数造山带泊松比偏低的特征类似。研究区域中下地壳广 泛存在强转换界面,该界面可能对应中下地壳高速层的上界面,埋深40~70 km,表明壳内发生深熔或部分熔融作用,导致 壳内发生重力分异,在中下地壳形成了高速薄层。  相似文献   

5.
Massif anorthosites form when basaltic magma differentiates in crustal magma chambers to form low-density plagioclase and a residual liquid whose density was greater than that of enclosing crustal rocks. The plagioclase and minor pyroxene crystallized in-situ on the floor of the magma chamber to produce the anorthosite complex, and the residual liquid migrated downwards, eventually to solidify as dense Fe-rich cumulates some of which were removed to the mantle. These movements were facilitated by high temperatures in Proterozoic continental crust, thus explaining the restriction of large anorthosite massifs to this period in Earth history.  相似文献   

6.
The Morin Plutonic Complex, in the southern part of the Grenville tectonic province (Canadian Shield) consists of a rock suite ranging from troctolite to farsundite. The centre of the complex is a large domical anorthosite body. Twenty-six chemical analyses have been carried out in order to compare the Morin Complex with similar complexes in the Grenville and Nain provinces. Variation diagrams constructed by plotting the major oxides vs. the differentiation index Al2O3+CaO+MgO show a gap between troctolite and anorthosite in the Morin Complex whereas this gap is absent in the anorogenic complexes of Labrador (Nain province). It is inferred that this gap is the result of intrusion, from the same magma chamber, of two distinct pulses separated by an intervening period of crustal uplift.A second gap occurs between anorthosites and farsundites in all complexes as yet investigated. This gap is an argument for an independent, possibly anatectic, origin of the farsundites.Mineral assemblages in the Morin Complex are compatible with cooling in the lower crust, at a depth of approximately 30 km.  相似文献   

7.
Anorthosite-bearing layered intrusions are unique to the Archaean rock record and are abundant in the Archaean craton of southern West Greenland and the Superior Province of Canada. These layered intrusions consist mainly of ultramafic rocks, gabbros, leucogabbros and anorthosites, and typically contain high-Ca (>An70) megacrystic (2–30 cm in diameter) plagioclase in anorthosite and leucogabbro units. They are spatially and temporally associated with basalt-dominated greenstone belts and are intruded by syn-to post-tectonic granitoid rocks. The layered intrusions, greenstone belts and granitoids all share the geochemical characteristics of Phanerozoic subduction zone magmas, suggesting that they formed mainly in a suprasubduction zone setting. Archaean anorthosite-bearing layered intrusions and spatially associated greenstone belts are interpreted to be fragments of oceanic crust, representing dismembered subduction-related ophiolites. We suggest that large degrees of partial melting (25–35%) in the hotter (1500–1600 °C) Archaean upper mantle beneath rifting arcs and backarc basins produced shallow, kilometre-scale hydrous magma chambers. Field observations suggest that megacrystic anorthosites were generated at the top of the magma chambers, or in sills, dykes and pods in the oceanic crust. The absence of high-Ca megacrystic anorthosites in post-Archaean layered intrusions and oceanic crust reflects the decline of mantle temperatures resulting from secular cooling of the Earth.  相似文献   

8.
The thickness and geothermal gradient of Archean continental crust are critical factors for understanding the geodynamic processes in Earth's early continental crust. Archean tonalite-trondhjemite-granodiorite (TTG) gneisses provide one of the potential indicators of paleo-crustal thickness and geothermal gradient because crust-derived TTG melts are generally thought to originate from partial melting of mafic rocks at the crustal root. In the Western Shandong Province (WSP) of the North China Craton (NCC), two episodes of Neoarchean TTG magmatism are recognized at ~2.70 Ga and ~2.55 Ga which were sourced from partial melting of juvenile crustal components. The ~2.70 Ga TTG gneisses show highly fractionated rare earth element (REE) patterns (average (La/Yb)N = 39), whereas the ~2.55 Ga TTG gneisses have relatively less fractionated REE patterns (average (La/Yb)N = 18). Petrogenetic evaluation suggest that the magmatic precursors of the TTG gneisses of both episodes originated from partial melting of juvenile crustal materials at different crustal depths with residual mineral phases of Grt, Cpx, Amp, Pl and Ilm. Together with the garnet proportion in the residue, the P–T pseudosections of equilibrium mineral assemblages, and the temperature calculated from Titanium-in-zircon thermometer, we estimate the Neoarchean crustal thicknesses as 44–51 km with geothermal gradients of 17 to 20 °C/km for the ~2.70 Ga TTG gneisses whereas the ~2.55 Ga TTG gneisses show lesser crustal thicknesses of 35–43 km with geothermal gradients of 19 to 26 °C/km, with an approximately 10 km difference in crustal thickness. Our estimates on the thicknesses and geothermal gradients of the Neoarchean crust are similar to those (~41 km, ~20 °C/km) of the modern average continental crust, indicating that a modern-style plate tectonic regime may have played an important role in the formation and evolution of the Neoarchean continental crust in the NCC.  相似文献   

9.
With a view towards understanding the evolutionary history of the complex South Indian shield, several geological and geophysical studies have been carried out. Recent geophysical studies include magnetotelluric (MT), deep seismic sounding (DSS), gravity, magnetic and deep resistivity soundings (DRS). In the present study, MT results along 140 km Andiyur-Turaiyur east-west profile is presented. The data are subjected to Groom-Bailey decomposition and static shift correction before deriving a 2-D model. The 2-D modeling results have shown that the upper crust (up to about 15 km) towards western part of the profile have exhibited high resistive character of about 40, 000 ohm-m as compared to the eastern part (less than 5, 000 ohm-m). The mid-lower crust has shown a decrease in resistivity in western part of the profile, the order of resistivity being 2, 000 ohm-m. An anomalous steep conductive feature (less than 100 ohm-m) is observed near Sankari at mid-lower crustal depths (>20 km) towards middle part of the profile. This feature is spatially correlatable with the well-known Moyar-Bhavani Shear Zone (MBSZ). The features obtained in the present study are consistent with earlier MT studies in this region and correlatable with other geophysical studies. DSS studies near the study region gave an evidence for differing crustal structure on either side of MBSZ. Variation in geoelectric character along the profile both in the upper crust and mid-lower crust indicate a block structure in the SGT with shear zones acting as boundaries. The new evidence in the form of distinct geoelectric structure and also variation in seismic structure indicate a continent-continent collision zone in this region and plays an important role for the Gondwana reconstruction models of South Indian shield.  相似文献   

10.
I. Kushiro 《Tectonophysics》1973,17(3):211-222
Partial melting experiments on spinel-lherzolite, a rock which probably occurs in relatively shallow parts of the oceanic upper mantle, demonstrate that alkali basaltic melt is formed at depths of at least 20 kbar whereas tholeiitic melt is formed at lower pressures (< 15 kbar) under anhydrous conditions. The specimen studied was a relatively iron-rich natural spinel-lherzolite (Fe/Mg+Fe=0.15) and the melts produced have ratios comparable to those obtained in basalts. Slight increase of degree of partial melting produces picritic melt over a wide pressure range. Under hydrous (water-excess) conditions, andesitic melt is produced by partial melting of the same natural spinel-lherzolite and a synthetic lherzolite. The melting experiments on two different abyssal tholeiites from the Mid-Atlantic Ridge suggest that the derivation of olivine tholeiite from a more mafic magma or a mantle peridotite (lherzolite) is possible, but is limited to depths shallower than 25 km under essentially anhydrous conditions, whereas plagioclase tholeiite may have been formed by fractional crystallization at depths of about 20 km in the presence of a small amount (～ 2 wt.%) of water.It is suggested that under mid-ocean ridges, partial melting of spinel-lherzolite at depths shallower than 60 km would produce olivine-tholeiitic magma, which differentiates at shallower levels (20–25 km) under either essentially anhydrous or hydrous (but vapor-absent) conditions to produce abyssal tholeiites of olivine-tholeiite type or plagioclase-tholeiite type. It may be also possible that the former olivine-tholeiite is generated by direct partial melting of plagioclase-lherzolite. Alkali basalts in the oceanic region may be generated at depths greater than 50 km by relatively small degree of partial melting. Along island arcs and continental margins, where the subduction zones probably exist, partial melting of lherzolite would take place in the presence of water that may be supplied by breakdown of hydrous minerals in the subducted oceanic crust, thereby producing andesitic magmas. High-alumina basalt magma could be produced by partial melting of the dehydrated oceanic crust in the subduction zone at depths between 40 and 60 km, where garnet is unstable above the solidus.  相似文献   

11.
Numerous ge ological and geophysical investigations within the past decades have shown that the Rhinegraben is the most pronounced segment of an extended continental rift system in Europe. The structure of the upper and lower crust is significantly different from the structure of the adjacent “normal” continental crust.

Two crustal cross-sections across the central and southern part of the Rhinegraben have been constructed based on a new evaluation of seismic refraction and reflection measurements. The most striking features of the structure derived are the existence of a well-developed velocity reversal in the upper crust and of a characteristic cushion-like layer with a compressional velocity of 7.6–7.7 km/sec in the lower crust above a normal mantle with 8.2 km/sec. Immediately below the sialic low-velocity zone in the middle part of the crust, an intermediate layer with lamellar structure and of presumably basic composition could be mapped.

It is interesting to note that the asymmetry of the sedimentary fill in the central Rhinegraben seems to extend down deeper into the upper crust as indicated by the focal depths of earthquakes. The top of the rift “cushion” shows a marked relief which has no obvious relation to the crustal structure above it or the visible rift at the surface.  相似文献   


12.
The crust ≈ 10–20 km under the Eifel is composed of amphibolite-facies metasediments and meta-igneous rocks of tonalitic to granodioritic composition; mafic granulites occupy the base of the crust down to a Moho depth between about 29 and 34 km. The meta-granodiorites and meta-tonalites have I-type chemical characteristics and appear to have formed approximately 400 Myr ago by partial melting of a lower crustal source. Amphibolite-facies metamorphism probably followed within the same orogeny. During the Quaternary, many amphibolite-facies rocks were subjected to contact heating in crustal magma chambers and/or during transport to the earth's surface. Contact heating is also recorded in radiogenic isotope compositions of minerals from one xenolith. A genetic link between meta-igneous amphibolites and the deeper crustal mafic granulites can neither be proven nor discounted by the isotope data. If there is a genetic relationship, it requires fractionation of a mafic magma in the lower crust and assimilation of metasediments and separation of a highly evolved melt.  相似文献   

13.
Continental crust is displaced in strike-slip fault zones through lateral and vertical movement that together drive burial and exhumation. Pressure – temperature–deformation ( P–T–d ) histories of orogenic crust exhumed in transcurrent zones record the mechanisms and conditions of these processes. The Skagit Gneiss Complex, a migmatitic unit of the North Cascades, Washington (USA), was metamorphosed at depths of ∼25–30 km in a continental arc under contraction, and is bounded on its eastern side by the long-lived transcurrent Ross Lake fault zone (RLFZ). The P–T–d conditions recorded by rocks on either side of the RLFZ vary along the length of the fault zone, but most typically the fault separates high-grade gneiss and plutons from lower-grade rocks. The Ruby Mt–Elijah Ridge area at the eastern margin of the Skagit Gneiss exposes tectonic contacts between gneiss and overlying rocks; the latter rocks, including slivers of Methow basin deposits, are metamorphosed and record higher-grade metamorphism than in correlative rocks along strike along the RLFZ. In this area, the Skagit Gneiss and overlying units all yield maximum P–T conditions of 8–10 kbar at >650 °C, indicating that slices of basin rocks were buried to similar mid-crustal depths as the gneiss. After exhumation of fault zone rocks to <15 km depth, intrusion of granitoid plutons drove contact metamorphism, resulting in texturally late andalusite–cordierite in garnet schist. In the Elijah Ridge area of the RLFZ, an overlapping step-over or series of step-overs that evolved through time may have facilitated burial and exhumation of a deep slice of the Methow basin, indicating that strike-slip faults can have major vertical displacement (tens of kilometres) that is significant during the crustal thickening and exhumation stages of orogeny.  相似文献   

14.
The Labrieville anorthosite massif (LBV) is found in the Central Granulite Terrain of the Grenville Structural Province, but it displays no evidence of post-emplacement deformation or metamorphism, implying intrusion following peak Grenvillian metamorphic conditions. We report U---Pb zircon dates of 1008±3.4 Ma for border leucogabbro and 1010±5.6 Ma for a cogenetic jotunite dike intruding anorthosite. We interpret these dates as igneous crystallization ages, and regard 1010 Ma as a reasonable estimate of the emplacement age for LBV. LBV is thus the youngest massif anorthosite yet recognized in North America, and its age is consistent with late-tectonic emplacement relative to the 1.1-1.0 Ga Grenville Orogeny. We also report a U---Pb date of 1015±1.8 Ma for metamorphic zircon in a country rock amphibolite. This could reflect the age of Grenvillian regional metamorphism, or perhaps a later heating episode resulting from the intrusion of numerous “late” felsic plutons in this area.

Rb---Sr, Sm---Nd and U---Th---Pb isotopic compositions for four rock types (anorthosite, jotunite, leucogabbro and a plagioclase megacryst) span narrow ranges in each case, consistent with comagmatism among these units. ISr (T=1010 Ma) range from 0.7032–0.7034 and are among the lowest yet reported for anorthosite in the Grenville Province. Initial εNd-values are positive (+0.8 to +2.5), like other Grenville anorthosites. Pb-isotopic compositions lie near the model mantle evolution curve of Zartman and Doe (1981), implying no involvement of significantly older crust in the petrogenesis of these rocks. Collectively, these data suggest a source for LBV in the mantle or mafic lower crust. LBV is a compositionally extreme anorthosite characterized by alkalic plagioclase (An32Or12) and high levels of Sr (2000 ppm) and Ba (1000 ppm). These properties cannot be attributed to simple crustal contamination of mantle-derived basalt. We suggest, alternatively, that LBV's compositional features may be linked with its late-tectonic character, perhaps reflecting partial melting of mafic lower crust brought about by crustal thickening during the Grenville Orogeny.  相似文献   


15.
Crustal studies within the Japanese islands have provided important constraints on the physical properties and deformation styles of the island arc crust. The upper crust in the Japanese islands has a significant heterogeneity characterized by large velocity variation (5.5–6.1 km/s) and high seismic attenuation (Qp=100–400 for 5–15 Hz). The lateral velocity change sometimes occurs at major tectonic lines. In many cases of recent refraction/wide-angle reflection profiles, a “middle crust” with a velocity of 6.2–6.5 km/s is found in a depth range of 5–15 km. Most shallow microearthquakes are concentrated in the upper/middle crust. The velocity in the lower crust is estimated to be 6.6–7.0 km/s. The lower crust often involves a highly reflective zone with less seismicity, indicating its ductile rheology. The uppermost mantle is characterized by a low Pn velocity of 7.5–7.9 km/s. Several observations on PmP phase indicate that the Moho is not a sharp boundary with a distinct velocity contrast, but forms a transition zone from the upper mantle to the lower crust. Recent seismic reflection experiments revealed ongoing crustal deformations within the Japanese islands. A clear image of crustal delamination obtained for an arc–arc collision zone in central Hokkaido provides an important key for the evolution process from island arc to more felsic continental crust. In northern Honshu, a major fault system with listric geometry, which was formed by Miocene back arc spreading, was successfully mapped down to 12–15 km.  相似文献   

16.
Systematic variations of the mineral chemistry of ferroan anorthosite 60025, which is probably a mixture of closely related materials, suggest that lunar anorthosites formed by strong fractional crystallization and near-perfect adcumulate growth, without trapping liquid. The parent liquid for the most primitive samples was saturated with olivine, plagioclase, pigeonite, and chromite, and evolved to one saturated with plagioclase, pigeonite, high-Ca pyroxene, and ilmenite. The parent liquid also had a very low Na2O content, and combined with strong fractional crystallization this explains the steep trend of anorthosites on an Mg1 (atomic 100 × Mg/(Mg + Fe)) v. An diagram. The mineral and chemical data for other anorthosites are consistent with such a model. Near-perfect adcumulation can occur if growth takes place at the crystal-liquid interface without the physical accumulation of crystals grown elsewhere, and is encouraged by the shifts in phase boundaries with pressure.Anorthosites are probably the remnants of a crust floating on, and crystallizing at the surface of, a magma ocean originally of bulk Moon composition. Mineralogical and trace element data suggest that the parental liquid for the most primitive anorthosites had previously crystallized no plagioclase and some but perhaps very little pyroxene. Hence the bulk Moon appears to be similar to that proposed by Ringwood (1976) but to have even lower alkalis, a subchondritic CaAl ratio, and REE abundances and patterns close to chondritic. The mare basalt sources are not directly complementary to the feldspathic crust, because experimental and trace element data indicate that they are too magnesian and contain too much high-Ca pyroxene. Other crustal rocks, such as the Mg-suite samples, are not closely related to anorthosites; in addition to their chemical differences they have a different crystallization sequence: ol → plag → px, in contrast with the ol → px → plag inferred for anorthosite parental liquid evolution.  相似文献   

17.
《Tectonophysics》1987,142(1):49-70
From densely covered seismic refraction data obtained in 1978 (Urach experiment) and 1984 (“Schwarzer Zollern-Wald” experiment) and from seismic reflection data and results from previous refraction investigations, a three-dimensional crustal model of southwest Germany was derived. Travel-time and amplitude information of seismic refraction data were interpreted with two-dimensional forward modeling (ray tracing) to calculate two crustal cross sections in southwest Germany. These results fill a gap in the existing data and enabled the construction of a detailed three-dimensional crustal model.While seismically the upper crust is laterally homogeneous (5.9–6.0 km/s) throughout the area, the middle and lower crust show pronounced lateral variations in thickness, velocity, and reflectivity. The Moho is a flat surface at a relatively shallow depth (25–26 km). We classify the middle and lower crust of southwest Germany into two characteristic crustal types. Type I consists of a mid-crustal low-velocity zone (5.4–5.8 km/s) overlying a thick (> 10 km), high-velocity (6.6–6.8 km/s) lower crust. Type II has no prominent mid-crustal low-velocity zone, and a thin (< 10 km), low-velocity (6.3–6.4 km/s) lower crust. The crustal types correlate with the major geologic units exposed in the area: Type I is present beneath the Black Forest, forming the eastern flank of the Rhinegraben and beneath the Swabian Jura, while Type II is present beneath the intervening Triassic sediments. Beneath the South German Molasse Basin, a low-velocity zone is also present in the upper middle-crust. Seismic reflection investigations have shown that the lower crust in southwest Germany comprises a stack of layers of alternating high- and low-velocities. The lateral variation of the reflectivity of this laminated lower crust has been recognized even on refraction data. We found that high-reflectivity of the lower crust correlates to high average velocity (6.7–6.8 km/s) in the lower crust (Type I). Thus, the average velocity of the lower crust in southwest Germany seems to be an indicator of the intensity of its lamination. The uppermost mantle has a velocity of 8.3 km/s in the area and a strong, positive velocity gradient.  相似文献   

18.
Garnet peridotites occur as lenses, blocks or layers within granulite–amphibolite facies gneiss in the Dabie-Sulu ultra-high-pressure (UHP) terrane and contain coesite-bearing eclogite. Two distinct types of garnet peridotite were identified based on mode of occurrence and petrochemical characteristics. Type A mantle-derived peridotites originated from either: (1) the mantle wedge above a subduction zone, (2) the footwall mantle of the subducted slab, or (3) were ancient mantle fragments emplaced at crustal depths prior to UHP metamorphism, whereas type B crustal peridotite and pyroxenite are a portion of mafic–ultramafic complexes that were intruded into the continental crust as magmas prior to subduction. Most type A peridotites were derived from a depleted mantle and exhibit petrochemical characteristics of mantle rocks; however, Sr and Nd isotope compositions of some peridotites have been modified by crustal contamination during subduction and/or exhumation. Type B peridotite and pyroxenite show cumulate structure, and some have experienced crustal metasomatism and contamination documented by high 87Sr/86Sr ratios (0.707–0.708), low εNd( t ) values (−6 to −9) and low δ18O values of minerals (+2.92 to +4.52). Garnet peridotites of both types experienced multi-stage recrystallization; some of them record prograde histories. High- P–T  estimates (760–970 °C and 4.0–6.5±0.2 GPa) of peak metamorphism indicate that both mantle-derived and crustal ultramafic rocks were subducted to profound depths >100 km (the deepest may be ≥180–200 km) and experienced UHP metamorphism in a subduction zone with an extremely low geothermal gradient of <5 °C km−1.  相似文献   

19.
许继峰  王强 《地学前缘》2003,10(4):401-406
Adakitic火成岩可以通过几种不同的岩浆作用方式产生,其中下地壳镁铁质岩石的直接部分熔融和拆沉下地壳的部分熔融可能是两种重要的adakitic火成岩形成方式。在一个大陆厚地壳背景,adakitic火成岩的产生指示了它们的岩浆源区位于大于40 km的下地壳之中,因此,暗示该大陆地壳的最小厚度超过40 km。青藏高原腹地的羌塘地区分布有40 Ma左右的“低镁”和“高镁”adakitic安山岩-英安岩-流纹岩,它们应分别是青藏高原厚大陆地壳下部镁铁质岩石直接部分熔融和拆沉的下地壳脱水熔融的产物。这套adakitic火山岩的厘定指示出在40 Ma左右时,青藏羌塘地区或更大范围的大陆地壳已经加厚到超过40 km,其地表在当时或稍后可能已经开始了隆升。  相似文献   

20.
Petrographic and chemical analyses demonstrate that late Cenozoic mafic lavas from the Basin-Range Province, western United States, are predominantly alkali-olivine basalts. Associated with these lavas are lesser volumes of basaltic andesite which appear to be differentiates from the more primitive alkali basalts. Late Cenozoic basalts from adjacent regions (Columbia River Plateau, Snake River Plain, Yellowstone area, High Cascades and Sierra Nevada) are predominantly tholeiitic. This apparent petrologic provincialism is supported by complementary variations in heat flow, seismic velocities, crustal thickness, magnetic anomalies and geologic setting.Alkali-olivine basalts from Japan and eastern Australia are analogous to those from the Basin-Range province both in composition and tectonic environment. It is suggested that these lavas are the products of a unique environment characterized by high heat flow and a thin crust.Recent melting experiments on peridotites and basalts and measurements of heat flow allow limits to be placed on the depth of origin of Basin-Range alkali-olivine basalt magmas. It is proposed that these lavas are produced by partial melting (less than 20%) of peridotitic mantle material at depths between 40 and 60 km in response to an elevated geothermal gradient. The basaltic andesites may be derived from hydrous alkali basalt magma by fractionation at depths of 30 to 40 km.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号