共查询到20条相似文献，搜索用时 31 毫秒
1.
Gyozo Jordan 《地球表面变化过程与地形》2003,28(8):807-822
Tectonic movement along faults is often re?ected by characteristic geomorphological features such as linear valleys, ridgelines and slope‐breaks, steep slopes of uniform aspect, regional anisotropy and tilt of terrain. Analysis of digital elevation models, by means of numerical geomorphology, provides a means of recognizing fractures and characterizing the tectonics of an area in a quantitative way. The objective of this study is to investigate the use of numerical geomorphometric methods for tectonic geomorphology through a case study. The methodology is based on general geomorphometry. In this study, the basic geometric attributes (elevation, slope, aspect and curvatures) are complemented with the automatic extraction of ridge and valley lines and surface speci?c points. Evans' univariate and bivariate methodology of general geomorphometry is extended with texture (spatial) analysis methods, such as trend, autocorrelation, spectral, and network analysis. Terrain modelling is implemented with the integrated use of: (1) numerical differential geometry; (2) digital drainage network analysis; (3) digital image processing; and (4) statistical and geostatistical analysis. Application of digital drainage network analysis is emphasized. A simple shear model with principal displacement zone with an NE–SW orientation can account for most of the the morphotectonic features found in the basin by geological and digital tectonic geomorphology analyses. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
2.
Landslides constitute one of the major natural hazards that could cause significant losses of life and property. Mapping or delineating areas prone to landsliding is therefore essential for land‐use activities and management decision making in hilly or mountainous regions. A landslide hazard map can be constructed by a qualitative combination of maps of site conditions, including geology, topography and geomorphology, by statistical methods through correlating landslide occurrence with geologic and geomorphic factors, or by using safety factors from stability analysis. A landslide hazard map should provide information on both the spatial and temporal probabilities of landsliding in a certain area. However, most previous studies have focused on susceptibility mapping, rather than on hazard mapping in a spatiotemporal context. This study aims at developing a predictive model, based on both quasi‐static and dynamic variables, to determine the probability of landsliding in terms of space and time. The study area selected is about 13 km2 in North Lantau, Hong Kong. The source areas of the landslides caused by the rainstorms of 18 July 1992 and 4–5 November 1993 were interpreted from multi‐temporal aerial photographs. Landslide data, lithology, digital elevation model data, land cover, and rainfall data were digitized into a geographic information system database. A logistic regression model was developed using lithology, slope gradient, slope aspect, elevation, slope shape, land cover, and rolling 24 h rainfall as independent variables, since the dependent variable could be expressed in a dichotomous way. This model achieved an overall accuracy of 87·2%, with 89·5% of landslide grid cells correctly classified and found to be performing satisfactorily. The model was then applied to rainfalls of a variety of periods of return, to predict the probability of landsliding on natural slopes in space and time. It is observed that the modelling techniques described here are useful for predicting the spatiotemporal probability of landsliding and can be used by land‐use planners to develop effective management strategies. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
3.
4.
Linking physiography and evaporation using the isotopic composition of river water in 16 Canadian boreal catchments 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 Highly seasonal boreal catchments are hydrologically complex and generally data poor and, hence, are ripe for investigation using tracer‐aided hydrologic models. The influence of physiography on isotopic metrics was assessed to identify the catchment characteristics dominating evaporative enrichment. A multiyear stable isotope of water dataset was collected at the outlets of 16 boreal catchments in central Canada ranging in area from 12 to 15,282 km2. Physiographic characteristics were obtained through raster analysis of freely available land cover images, stream networks, and digital elevation models. Correlation analysis indicated that as the percentage coverage of open water increased, so too did the evaporative effects observed at the catchment outlet. Correlation to wetland metrics indicated that increasing the percentage coverage of wetlands can reduce or increase evaporative effects observed, depending on the isotopic metric used and the corresponding drainage density, catchment slope, and presence of headwater lakes. The slopes of river evaporative‐mixing lines appear to reflect multifaceted relationships, strongest between catchment slope, headwater lakes, and connected wetlands, whereas mean line‐conditioned excess is more directly linked to physiographic variables. Hence, the slopes of river evaporative‐mixing lines and mean line‐conditioned excess are not interchangeable metrics of evaporative enrichment in a catchment. Relationships identified appear to be independent of catchment scale. These results suggest that adequate inclusion of the distribution of open water throughout a catchment, adequate representation of wetland processes, catchment slope, and drainage density are critical characteristics to include in tracer‐aided hydrologic models in boreal environments in order to minimize structural uncertainty. 相似文献
5.
6.
Hillslopes are thought to poorly record tectonic signals in threshold landscapes. Numerous previous studies of steep landscapes suggest that large changes in long‐term erosion rate lead to little change in mean hillslope angle, measured at coarse resolution. New LiDAR‐derived topography data enables a finer examination of threshold hillslopes. Here we quantify hillslope response to tectonic forcing in a threshold landscape. To do so, we use an extensive cosmogenic beryllium‐10 (10Be)‐based dataset of catchment‐averaged erosion rates combined with a 500 km2 LiDAR‐derived 1 m digital elevation model to exploit a gradient of tectonic forcing and topographic relief in the San Gabriel Mountains, California. We also calibrate a new method of quantifying rock exposure from LiDAR‐derived slope measurements using high‐resolution panoramic photographs. Two distinct trends in hillslope behavior emerge: below catchment‐mean slopes of 30°, modal slopes increase with mean slopes, slope distribution skewness decreases with increasing mean slope, and bedrock exposure is limited; above mean slopes of 30°, our rock exposure index increases strongly with mean slope, and the prevalence of angle‐of‐repose debris wedges keeps modal slopes near 37°, resulting in a positive relationship between slope distribution skewness and mean slope. We find that both mean slopes and rock exposure increase with erosion rate up to 1 mm/a, in contrast to previous work based on coarser topographic data. We also find that as erosion rates increase, the extent of the fluvial network decreases, while colluvial channels extend downstream, keeping the total drainage density similar across the range. Our results reveal important textural details lost in 10 or 30 m resolution digital elevation models of steep landscapes, and highlight the need for process‐based studies of threshold hillslopes and colluvial channels. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
7.
Pascale M. Biron Guénolé Choné Thomas Buffin‐Bélanger Sylvio Demers Taylor Olsen 《地球表面变化过程与地形》2013,38(15):1808-1821
Hydro‐geomorphological assessments are an essential component for riverine management plans. They usually require costly and time‐consuming field surveys to characterize the spatial variability of key variables such as flow depth, width, discharge, water surface slope, grain size and unit stream power throughout the river corridor. The objective of this research is to develop automated tools for hydro‐geomorphological assessments using high‐resolution LiDAR digital elevation models (DEMs). More specifically, this paper aims at developing geographic information system (GIS) tools to extract channel slope, width and discharge from 1 m‐resolution LiDAR DEMs to estimate the spatial distribution of unit stream power in two contrasted watersheds in Quebec: a small agricultural stream (Des Fèves River) and a large gravel‐bed river (Matane River). For slope, the centreline extracted from the raw LiDAR DEM was resampled at a coarser resolution using the minimum elevation value. The channel width extraction algorithm progressively increased the centerline from the raw DEM until thresholds of elevation differences and slopes were reached. Based on the comparison with over 4000 differential global positioning system (GPS) measurements of the water surface collected in a 50 km reach of the Matane River, the longitudinal profile and slope estimates extracted from the raw and resampled LiDAR DEMs were in very good agreement with the field measurements (correlation coefficients ranging from 0 · 83 to 0 · 87) and can thus be used to compute stream power. The extracted width also corresponded very well to the channel as seen from ortho‐photos, although the presence of bars in the Matane River increased the level of error in width estimates. The estimated maximum unit stream power spatial patterns corresponded well with field evidence of bank erosion, indicating that LiDAR DEMs can be used with confidence for initial hydro‐geomorphological assessments. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
Airborne gamma ray survey data were used to provide information on potassium, thorium and uranium concentrations in surface soil and rock in arid central Australia. Spatial patterns in these radioelements allow tracing of paths of sediment at catchment scale. Survey elevation data are combined with contour data to produce digital elevation models for terrain analysis, tracing of sediment flow paths and modelling of extreme floods. Gamma ray data show consistent variation with slope, a limited range of drainage areas, and erosion/deposition models derived from the conservation of mass equation. Supply‐limited sediment transport models give a reasonable reproduction of observed radioelement distribution but some elements of the distribution pattern reflect the area inundated by 500–1000 year floods rather than the effects of simple downslope movement. Partial area sediment supply models are derived by downstream accumulation of erosion and deposition rates calculated using the conservation of mass equation with transport laws based on slope alone and stream power. Comparison with observed radioelement patterns suggests that both transport laws apply in different parts of the landscape. Regional‐scale sediment transport models will require a range of models depending on location in the landscape and event frequency. This approach may allow estimation of sediment delivery ratios. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
9.
With the introduction of high‐resolution digital elevation models, it is possible to use digital terrain analysis to extract small streams. In order to map streams correctly, it is necessary to remove errors and artificial sinks in the digital elevation models. This step is known as preprocessing and will allow water to move across a digital landscape. However, new challenges are introduced with increasing resolution because the effect of anthropogenic artefacts such as road embankments and bridges increases with increased resolution. These are problematic during the preprocessing step because they are elevated above the surrounding landscape and act as artificial dams. The aims of this study were to evaluate the effect of different preprocessing methods such as breaching and filling on digital elevation models with different resolutions (2, 4, 8, and 16 m) and to evaluate which preprocessing methods most accurately route water across road impoundments at actual culvert locations. A unique dataset with over 30,000 field‐mapped road culverts was used to assess the accuracy of stream networks derived from digital elevation models using different preprocessing methods. Our results showed that the accuracy of stream networks increases with increasing resolution. Breaching created the most accurate stream networks on all resolutions, whereas filling was the least accurate. Burning streams from the topographic map across roads from the topographic map increased the accuracy for all methods and resolutions. In addition, the impact in terms of change in area and absolute volume between original and preprocessed digital elevation models was smaller for breaching than for filling. With the appropriate methods, it is possible to extract accurate stream networks from high‐resolution digital elevation models with extensive road networks, thus providing forest managers with stream networks that can be used when planning operations in wet areas or areas near streams to prevent rutting, sediment transport, and mercury export. 相似文献
10.
Stream network morphometrics have been used frequently in environmental applications and are embedded in several hydrological models. This is because channel network geometry partly controls the runoff response of a basin. Network indices are often measured from channels that are mapped from digital elevation models (DEMs) using automated procedures. Simulations were used in this paper to study the influence of elevation error on the reliability of estimates of several common morphometrics, including stream order, the bifurcation, length, area and slope ratios, stream magnitude, network diameter, the flood magnitude and timing parameters of the geomorphological instantaneous unit hydrograph (GIUH) and the network width function. DEMs of three UK basins, ranging from high to low relief, were used for the analyses. The findings showed that moderate elevation error (RMSE of 1·8 m) can result in significant uncertainty in DEM‐mapped network morphometrics and that this uncertainty can be expressed in complex ways. For example, estimates of the bifurcation, length and area ratios and the flood magnitude and timing parameters of the GIUH each displayed multimodal frequency distributions, i.e. two or more estimated values were highly likely. Furthermore, these preferential estimates were wide ranging relative to the ranges typically observed for these indices. The wide‐ranging estimates of the two GIUH parameters represented significant uncertainty in the shape of the unit hydrograph. Stream magnitude, network diameter and the network width function were found to be highly sensitive to elevation error because of the difficulty in mapping low‐magnitude links. Uncertainties in the width function were found to increase with distance from outlet, implying that hydrological models that use network width contain greater uncertainty in the shape of the falling limb of the hydrograph. In light of these findings, care should be exercised when interpreting the results of analyses based on DEM‐mapped stream networks. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
11.
Rock slope instability assessment using spatially distributed structural orientation data in Darjeeling Himalaya (India) 总被引：1，自引：0，他引：1
Saibal Ghosh Andreas Günther Emmanuel John M. Carranza Cees J. van Westen Victor G. Jetten 《地球表面变化过程与地形》2010,35(15):1773-1792
We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km2 in Darjeeling Himalaya (India) and in a small portion (9 km2) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
12.
Effects of slope angle and aspect on plant cover and species richness in a humid Mediterranean badland 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 Estela Nadal‐Romero Kristien Petrlic Els Verachtert Esther Bochet Jean Poesen 《地球表面变化过程与地形》2014,39(13):1705-1716
Soil erosion is one of the most severe land degradation processes in the Mediterranean region. Although badlands occupy a relatively small fraction of the Mediterranean area, their erosion rates are very high. Many studies have investigated to what extent vegetation controls soil erosion rates. This study, however, deals with the impact of erosion on vegetation establishment. In semi‐arid badlands of the Mediterranean, soil water availability constitutes the main limiting factor for vegetation development. As a consequence, south‐facing slopes are typically less vegetated due to a very large water stress. However, these findings do not necessarily apply to humid badlands. The main objective of this paper is to determine the topographic thresholds for plant colonization in relation to slope aspect and to assess the spatial patterns of vegetation cover and species richness. We surveyed 179 plots on highly eroded badland slopes in the Central Pyrenees. We defined four aspect classes subdivided into slope angle classes. Colonization success was expressed in terms of vegetation cover and species richness. Slope angle thresholds for plant colonization were identified for each slope aspect class by means of binary logistic regressions. The results show that a critical slope angle exists below which plants colonize the badland slopes. Below this critical slope angle, plant cover and species richness increase with a decreasing slope angle. The largest critical slope angles in humid badlands are observed on south‐facing slopes, which contrasts with the results obtained in semi‐arid badlands. North‐facing slopes however are characterized by a reduced overall vegetation cover and species richness, and lower topographic threshold values. The possible underlying processes responsible for this slope‐aspect discrepancy in vegetation characteristics are discussed in terms of environmental variables that control regolith development, weathering and erosion processes. Moreover, possible restoration strategies through the use of vegetation in highly degraded environments are highlighted. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
The application of geomorphic principles to land reclamation after surface mining has been reported in the literature since the mid‐1990s, mostly from Australia, Canada and the USA. This paper discusses the reclamation problems of contour mining and quarries on slopes, where steep gradients are prone to both mass movement and water erosion. To address these problems simultaneously, a geomorphic model for reclaiming surface mined slopes is described. Called the ‘highwall–trench–concave slope’ model, it was first applied in the 1995 reclamation of a quarry on a slope (La Revilla) in Central Spain. The geomorphic model does not reproduce the original topography, but has two very different sectors and objectives: (i) the highwall–trench sector allows the former quarry face to evolve naturally by erosion, accommodating fallen debris by means of a trench constructed at the toe of the highwall; (ii) the concave‐slope base sector, mimicking the landforms of the surrounding undisturbed landscape, promotes soil formation and the establishment of self‐sustaining, functional ecosystems in the area protected from sedimentation by the trench. The model improves upon simple topographic reconstruction, because it rebuilds the surficial geology architecture and facilitates re‐establishment of equilibrium slopes through the management and control of geomorphic processes. Thirteen years of monitoring of the geomorphic and edaphic evolution of La Revilla reclaimed quarry confirms that the area is functioning as intended: the highwall is backwasting and material is accumulating at the trench, permitting the recovery of soils and vegetation on the concave slope. However, the trench is filling faster than planned, which may lead to run‐off and sedimentation on the concave slope once the trench is full. The lesson learned for other scenarios is that the model works well in a two‐dimensional scheme, but requires a three‐dimensional drainage management, breaking the reclaimed area into several watersheds with stream channels. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
14.
— Seismic responses of weathered and non-weathered ridge models were simulated to study the ridge effects on the ground motion characteristics. The range of ridge slope from 19.98° to 45° was considered to produce a possible set of generalized results. 2.5-D modeling based on parsimonious staggered grid approximation of elastodynamic wave equations was adopted in simulations. Computed results reveal an increase of amplitude of incoming waves with both elevation and the slope of the ridge. Further, the characteristics of surface waves are highly ridge slope dependent. The analysis of responses of weathered and non-weathered ridge models reveals that ridge has caused a strong generation of surface waves near its top. The surface waves are not dominating on the top of the ridge but at some lower elevation. The increase of weathering of ridge further intensified the ridge effect. Analysis in frequency domain, based on spectral ratio method, does not indicate any pattern in the spectral amplification factor and is very much sensitive to slope, source focal mechanism and location. However, on an average there is a continuous decrease of amplification with slope in the vertical component and increase in the transverse component, and it is increasing in the radial component up to slope =38.0° and thereafter decreasing. 相似文献
15.
Habip Eroğlu Günay Çakır Fatih Sivrikaya Abdullah E. Akay 《Stochastic Environmental Research and Risk Assessment (SERRA)》2010,24(5):699-704
Soil erosion is one of the most important environmental problems. In the case of small scale areas where soil properties and
climate have relatively uniform characteristics, vegetation cover and topography (i.e. ground slope) are the main factors
that affect the amount of soil erosion. Lack of vegetation cover on bare soil areas, including forest road side slopes, especially
in mountainous regions with steep slopes, may significantly increase the erosion rate. Determining and classifying erosion
risks in such areas can help preventing environmental impacts. In this study, remotely sensed data and elevation data were
used to extract and classify bare soil erosion risk areas for a study area selected from Hatila Valley Natural Protected Area
in northeastern Turkey. High resolution IKONOS imagery was used to apply land use classification in ERDAS Imagine 9.0. To
generate erosion risk map of the bare soil areas, classified image was superimposed on top of slope map, generated based on
a Digital Elevation Model (DEM) in ArcGIS 9.2. The results indicated that 1.43, 5.85, 34.62, 53.16, and 4.94% of the bare
soil areas in the study area were under very low, low, medium, high, and very high erosion risks, respectively. The overall
classification accuracy of 82.5% indicated the potential of the proposed methodology. 相似文献
16.
Lisa Shevenell 《水文研究》1999,13(4):577-596
Values of evapotranspiration are required for a variety of water planning activities in arid and semi‐arid climates, yet data requirements are often large, and it is costly to obtain this information. This work presents a method where a few, readily available data (temperature, elevation) are required to estimate potential evapotranspiration (PET). A method using measured temperature and the calculated ratio of total to vertical radiation (after the work of Behnke and Maxey, 1969) to estimate monthly PET was applied for the months of April–October and compared with pan evaporation measurements. The test area used in this work was in Nevada, which has 124 weather stations that record sufficient amounts of temperature data. The calculated PET values were found to be well correlated (R2=0·940–0·983, slopes near 1·0) with mean monthly pan evaporation measurements at eight weather stations.In order to extrapolate these calculated PET values to areas without temperature measurements and to sites at differing elevations, the state was divided into five regions based on latitude, and linear regressions of PET versus elevation were calculated for each of these regions. These extrapolated PET values generally compare well with the pan evaporation measurements (R2=0·926–0·988, slopes near 1·0). The estimated values are generally somewhat lower than the pan measurements, in part because the effects of wind are not explicitly considered in the calculations, and near‐freezing temperatures result in a calculated PET of zero at higher elevations in the spring months. The calculated PET values for April–October are 84–100% of the measured pan evaporation values. Using digital elevation models in a geographical information system, calculated values were adjusted for slope and aspect, and the data were used to construct a series of maps of monthly PET. The resultant maps show a realistic distribution of regional variations in PET throughout Nevada which inversely mimics topography. The general methods described here could be used to estimate regional PET in other arid western states (e.g. New Mexico, Arizona, Utah) and arid regions world‐wide (e.g. parts of Africa). Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
17.
Assessment of the Accuracy of SRTM C- and X-Band High Mountain Elevation Data: a Case Study of the Polish Tatra Mountains 总被引：1，自引：0，他引：1
Global digital elevation models (DEMs) are an invaluable source of information in large area studies. Of particular interest are shuttle radar topography mission (SRTM) data that are freely available for the scientific community worldwide. Prior to any application, global datasets should be evaluated using reference data of higher accuracy. Therefore, the main objective of this study was to assess the accuracy of the SRTM C-band (version 4) DEM and SRTM X-band DEM of mountainous areas located in Poland and to examine the quality of data in relation to topographic parameters, radar beam geometry, initial voids in data and the presence of forest cover. A DEM from the Central National Geodetic and Cartographic Inventory, Poland, served as a reference. The study consisted of three steps: (i) the computation of vertical errors of the SRTM C- and X-band DEMs, (ii) the examination of any systematic bias in the data, and (iii) the analysis of the relationships between the elevation errors and terrain slope, aspect, local incidence angle, occurrence of voids and land cover. We found that the SRTM C- and X-band DEMs have mean errors equal to 4.31 ± 14.09 and 9.03 ± 37.40 m and root mean square errors equal to 14.74 and 38.47 m, respectively. Only 82 % of the C-band DEM and 74 % of the X-band DEM vertical errors had absolute values below 16 m. We found that the most important factors determining the occurrence of high errors were the distribution of initial voids and high slope angles for the C-band DEM, and local incidence angle, slope, aspect and radar beam geometry for the X-band DEM. In both cases, the presence of forest cover increased the mean error by approximately 10 m. 相似文献
18.
Accurate estimations of water retention and detention are needed to simulate surface runoff and soil erosion following a rainfall event in a catchment. Several equations to estimate the amount of surface depressional storage, the fraction of the soil surface covered by water and the amount of rainfall excess needed to start surface runoff have been developed by Onstad (1984). The random roughness and slope gradient are needed for those estimations. Surface micro-elevation data have been gathered by a photographic method. The random roughness was determined from those elevation measurements. Several factors which have an impact on the soil surface roughness were taken into account. The main sources of influence are the type of land use, the crop stage within the growing period and tillage direction. Analyses of variance indicated that the variation in the RR-index could be explained mainly by type of land use, orientation and field type. The temporal variation was relatively small. Gradient data have been determined from a digital elevation model, constructed by digitizing contours. Combining the random roughness and the steepness of slope, the amounts of surface water retention and detention could be estimated. Knowledge of water retention and detention will improve the estimations of runoff and soil erosion modelling in catchments, such as those made with the LISEM model. The agricultural systems examined in this study have similar random roughness values in summer. Different soil erosion rates for several types of land use can not therefore be explained by the random roughness. 相似文献
19.
Mountainous headwater streams represent a substantial proportion of the global stream network. These small streams may flow episodically, seasonally, or perennially, providing diverse values and services. Given their broad importance and growing pressures on terrestrial and aquatic resources, we must improve our understanding of the drivers of flow permanence to facilitate informed land and water management decisions. We used field observations from >10 cross-sections in each of 101 non-fish bearing, headwater streams across four geomorphic provinces in Northern California to quantify flow permanence and network connectivity during the summer low flow period in 2018. At each stream cross-section, we noted the presence or absence of streamflow and used this information to classify streams as perennial (continuous streamflow in all cross-sections) or non-perennial and connected (surface water in the most downstream cross-section) or disconnected. At each cross-section, we also quantified channel size (width and depth) and grain size. We coupled field observations with geospatial data of catchment physiography, hydrology, and climate in random forest models to investigate controls of flow permanence and network connectivity. Potential drivers of flow permanence or network connectivity included in our models were channel geometry, grain size, slope, aspect, elevation, annual and seasonal precipitation, air temperature, and topographic wetness index. We found more perennial streams in the Klamath Mountains and Sierra Nevada than in the Cascades and N. Coast regions. Streams in the Klamath were the most connected followed by streams in the N. Coast, Sierra Nevada, and Cascades. The most important variables for predicting flow permanence were channel grain size, winter 2018 precipitation, and drainage area. Comparatively, the most important variables for predicting network connectivity were winter and spring 2018 precipitation, grain size, and bankfull depth. Our study illustrated the complexity of the processes that drive flow permanence and highlighted the uncertainty in projecting the precense of water in streams across diverse regions. 相似文献
20.
Soil erosion plays an important role in plant colonization of semi‐arid degraded areas. In this study, we aimed at deepening our knowledge of the mechanisms that control plant colonization on semi‐arid eroded slopes in east Spain by (i) determining topographic thresholds for plant colonization, (ii) identifying the soil properties limiting plant establishment and (iii) assessing whether colonizing species have specific plant traits to cope with these limitations. Slope angle and aspect were surrogates of erosion rate and water availability, respectively. Since soil erosion and water availability can limit plant establishment and both can interact in the landscape, we analysed variations in colonization success (vegetation cover and species number) with slope angle on 156 slopes, as a function of slope aspect. After determining slope angle thresholds for plant colonization, soil was sampled near the threshold values for soil analysis [nitrogen, phosphorous, calcium carbonate (CaCO3), water holding capacity]. Plant traits expressing the plant colonizing capacity were analysed both in the pool of species colonizing the steep slopes just below the threshold and in the pool of species inhabiting gentler slopes and absent from the slopes just below the threshold. Results show that the slope angle threshold for plant colonization decreased from north to south. For the vegetation cover, threshold values were 63°, 50°, 46°, 41° for the north, east, west and south slope aspect classes, respectively, and 65°, 53°, 49° and 45° for the species richness and the same aspect classes. No differences existed in soil properties at slope angle threshold values among slope aspects and between slope positions (just below and above the threshold) within slope aspect classes. This suggests that variations between slope aspect classes in the slope angle threshold result from differences in the colonizing capacity of plants which is controlled by water availability. Long‐distance dispersal and mucilage production were preferably associated with the pool of colonizing species. These results are discussed in the perspective of a more efficient ecological restoration of degraded semi‐arid ecosystems where soil erosion acts as an ecological filter for plant establishment. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献