首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
Twenty-six months of continuous ceilometer data are used to estimate the convective mixed-layer height for 710 days by identifying backscatter gradients associated with the entrainment zone. To accomplish this, a semi-automatic procedure is developed that removes all non-applicable data before applying a mixed-layer height algorithm to the backscatter profiles. Two different algorithms for estimating the mixed-layer height are assessed: the minimum-gradient method and the ideal-profile method. The latter of these two algorithms is found to be more robust. Comparisons of mixed-layer height values estimated from the ceilometer agree with previous observations with slightly higher estimates in the mornings and evenings. For clear days with no cumulus cloud formation, the seasonal cycle in mixed-layer heights peaks in late June to early July. Daily maximum values are suppressed by the site’s coastal location, remaining below 800 m for all but a few days. The mean daily maximum mixed-layer height increases by 384 m for days with boundary-layer clouds. The mean summer diurnal trend is found not to differ greatly from that in spring on clear days, while days with boundary-layer clouds have higher spring values than in summer. Net surface heat flux and synoptic stability likely have the largest influence on the mixed-layer heights. Additionally, large intra-monthly variability suggests a strong influence from regional dynamics.  相似文献   

2.
Summer boundary-layer height at the plateau site of Dome’C,antarctica   总被引：1，自引：1，他引：0  
Measurements of the mean and turbulent structure of the planetary boundary layer using a sodar and a sonic anemometer, and radiative measurements using a radiometer, were carried out in the summer of 1999–2000 at the Antarctic plateau station of Dome C during a two-month period. At Dome C strong ground-based inversions dominate for most of the year. However, in spite of the low surface temperatures (between −50 and −20 °C), and the surface always covered by snow and ice, a regular daytime boundary-layer evolution, similar to that observed at mid-latitudes, was observed during summertime. The mixed-layer height generally reaches 200–300 m at 1300–1400 LST in high summer (late December, early January); late in the summer (end of January to February), as the solar elevation decreases, it reduces to 100–200 m. A comparison between the mixed-layer height estimated from sodar measurements and that calculated using a mixed-layer growth model shows a rather satisfactory agreement if we assign a value of 0.01–0.02 m s−1 to the subsidence velocity at the top of the mixed layer, and a value of 0.003–0.004 K m−1 to the potential temperature gradient above the mixed layer.  相似文献   

3.
Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance \((\sigma _w^2 >0.1\,\hbox {m}^{2}\hbox {s}^{-2})\) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which \(\sigma _w^2\) decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from \(\approx \)270 to \(\approx \)1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.  相似文献   

4.
A cold-air outbreak over the Mediterranean, associated with a Tramontane event, has been simulated with the atmospheric non-hydrostatic model Meso-NH using a horizontal resolution of 2 km. Results are compared with in situ aircraft, airborne lidar and satellite measurements. On average, the mean and turbulent parameters simulated in the surface layer and mixed layer compared well with in situ measurements. The model was able to reproduce accurately the Foehn effect in the wake of Cape Creus, as well as the occurence of rolls in the coastal region in connection with cloud streets observed with AVHRR. Over the sea, the threshold value of turbulent kinetic energy defining the height of the atmospheric boundary-layer top in the model (defined as 25% of the maximum turbulent kinetic energy in the profile) enables the simulated atmospheric boundary-layer height to match the one retrieved from lidar measurements. Nevertheless, the model did not handle very well the abrupt gradients of all meteorological parameters observed at the top of the atmospheric boundary-layer. Reasons for this are investigated.  相似文献   

5.
The determination of the depth of daytime and nighttime mixing layers must be known very accurately to relate boundary-layer concentrations of gases or particles to upstream fluxes. The mixing-height is parametrized in numerical weather prediction models, so improving the determination of the mixing height will improve the quality of the estimated gas and particle budgets. Datasets of mixing-height diurnal cycles with high temporal and spatial resolutions are sought by various end users. Lidars and ceilometers provide vertical profiles of backscatter from aerosol particles. As aerosols are predominantly concentrated in the mixing layer, lidar backscatter profiles can be used to trace the depth of the mixing layer. Large numbers of automatic profiling lidars and ceilometers are deployed by meteorological services and other agencies in several European countries providing systems to monitor the mixing height on temporal and spatial scales of unprecedented density. We investigate limitations and capabilities of existing mixing height retrieval algorithms by applying five different retrieval techniques to three different lidars and ceilometers deployed during two 1-month campaigns. We studied three important steps in the mixing height retrieval process, namely the lidar/ceilometer pre-processing to reach sufficient signal-to-noise ratio, gradient detection techniques to find the significant aerosol gradients, and finally quality control and layer attribution to identify the actual mixing height from multiple possible layer detections. We found that layer attribution is by far the most uncertain step. We tested different gradient detection techniques, and found no evidence that the first derivative, wavelet transform, and two-dimensional derivative techniques have different skills to detect one or multiple significant aerosol gradients from lidar and ceilometer attenuated backscatter. However, our study shows that, when mixing height retrievals from a ultraviolet lidar and a near-infrared ceilometer agreed, they were 25?C40% more likely to agree with an independent radiosonde mixing height retrieval than when each lidar or ceilometer was used alone. Furthermore, we point to directions that may assist the layer attribution step, for instance using commonly available surface measurements of radiation and temperature to derive surface sensible heat fluxes as a proxy for the intensity of convective mixing. It is a worthwhile effort to pursue such studies so that within a few years automatic profiling lidar and ceilometer networks can be utilized efficiently to monitor mixing heights at the European scale.  相似文献   

6.
Double-layered structures found over the Baltic Sea are investigated using radiosoundings and lidar measurements. Situations with double-layer structures are also simulated with the regional model REMO in a realistic manner. The double layer consists of two adjacent well-mixed layers, with a sharp inversion in between.Results from radiosoundings show that the double-layer structure over the Baltic Sea mainly occurs during the autumn with thermally unstable stratification near the surface. The structure is present in about 50 % of the radiosoundings performed during autumn. The presence of the double-layer structure cannot be related to any specific wind direction, wind speed or sea surface temperature.The lidar measurements give a more continuous picture of the time evolution of the double-layer structure, and show that the top of the lower layer is not a rigid lid for vertical transport. Two possible explanations of the double-layer structure are given, (i) the structure is caused by `advection' of land boundary-layer air over the convective marine boundary layer or, (ii) by development of Sc clouds in weak frontal zones connected to low pressure systems. Also the forming of Cu clouds is found to be important for the development of a double-layer structure.  相似文献   

7.
Lidar measurements of the thickness of the atmospheric entrainment zone are presented. The measurements were obtained in central Illinois during 6 days of clear-air convection.A new method was developed to monitor the potential temperature jump across the entrainment zone. A single early morning temperature sounding and continuous lidar measurements of the mixed-layer height provide potential temperature jump values which agree well with in situ observations.Lidar measurements of the thickness of the entrainment zone normalized by mixed-layer depth are presented as a function of a convective Richardson number; these values show reasonable agreement with published laboratory results. The lidar observations span a wider range of mixed-layer depths and contain higher values of the normalized entrainment rate (dh/dt)/w * than those observed in tank studies. Both lidar and tank results show that simple parcel theory does not properly predict entrainment-zone thickness. During this experiment which examined mostly high entrainment conditions, the normalized entrainment-layer thickness was linearly dependent on entrainment rate.  相似文献   

8.
Different methods to determine the height of the convective boundary layer from lidar measurements are described and compared. The differences in either aerosol backscatter or in humidity between the boundary layer and the free troposphere are used, and either the variance or the gradient profile of the parameter under study is evaluated. On average the different methods are in very good agreement. Temporal resolution of the gradient methods is very high, on the order of seconds, but often there is an ambiguity in the choice of the “relevant” minimum in the gradient that corresponds to the boundary-layer height. This is avoided by combining the variance and the gradient methods, using the result of the variance analysis as an indicator for the region where the minimum of the gradient is sought. The combined method is useful for automated determination of the boundary-layer height at least under convective conditions. Aerosol backscatter is found to be as good an indicator for boundary-layer air as humidity, so a relatively simple backscatter lidar is sufficient for determination of the boundary-layer height.  相似文献   

9.
We present an analysis of data from a nearly 1-year measurement campaign performed at Høvsøre, Denmark, a coastal farmland area where the terrain is flat. Within the easterly sector upstream of the site, the terrain is nearly homogenous. This topography and conditions provide a good basis for the analysis of vertical wind-speed profiles under a wide range of atmospheric stability, turbulence, and forcing conditions. One of the objectives of the campaign was to serve as a benchmark for flow over flat terrain models. The observations consist of combined wind lidar and sonic anemometer measurements at a meteorological mast. The sonic measurements cover the first 100 m and the wind lidar measures above 100 m every 50 m in the vertical. Results of the analysis of observations of the horizontal wind-speed components in the range 10–1200 m and surface turbulence fluxes are illustrated in detail, combined with forcing conditions derived from mesoscale model simulations. Ten different cases are presented. The observed wind profiles approach well the simulated gradient and geostrophic winds close to the simulated boundary-layer height during both barotropic and baroclinic conditions, respectively, except for a low-level jet case, as expected. The simulated winds are also presented for completeness and show good agreement with the measurements, generally underpredicting the turning of the wind in both barotropic and baroclinic cases.  相似文献   

10.
Lidar Measurements of Aerosols in the Tropical Atmosphere   总被引：3，自引：0，他引：3  
Measurements of atmospheric aerosols and trace gases using the Laser radar (lidar) techniques, have been in pro-gress since 1985 at the Indian Institute of Tropical Meteorology, Pune (18o32’N, 73o51’E, 559 m AMSL), India. These observations carried out during nighttime in the lower atmosphere (up to 5.5 km AGL), employing an Argon ion / Helium-Neon lidar provided information on the nature, size, concentration and other characteristics of the constituents present in the tropical atmosphere. The time-height variations in aerosol concentration and associated layer structure exhibit marked differences between the post-sunset and pre-sunrise periods besides their seasonal va-riation with maximum concentration during pre-monsoon / winter and minimum concentration during monsoon months. These observations also revealed the influence of the terrain of the experimental site and some selected me-teorological parameters on the aerosol vertical distributions. The special observations of aerosol vertical profiles ob-tained in the nighttime atmospheric boundary layer during October 1986 through September 1989 showed that the most probable occurrence of mixing depth lies between 450 and 550 m, and the multiple stably stratified aerosol lay-ers present above the mixing depth with maximum frequency of occurrence at around 750 m. This information on nighttime mixing depth / stable layer derived from lidar aerosol observations showed good agreement with the height of the ground-based shear layer / elevated layer observed by the simultaneously operated sodar at the lidar site.  相似文献   

11.
The cloud fraction(CF) and cloud-base heights(CBHs), and cirrus properties, over a site in southeastern China from June 2008 to May 2009, are examined by a ground-based lidar. Results show that clouds occupied the sky 41% of the time.Significant seasonal variations in CF were found with a maximum/minimum during winter/summer and similar magnitudes of CF in spring and autumn. A distinct diurnal cycle in the overall mean CF was seen. Total, daytime, and nighttime annual mean CBHs were 3.05 ± 2.73 km, 2.46 ± 2.08 km, and 3.51 ± 3.07 km, respectively. The lowest/highest CBH occurred around noon/midnight. Cirrus clouds were present ～36.2% of the time at night with the percentage increased in summer and decreased in spring. Annual mean values for cirrus geometrical properties were 8.89 ± 1.65 km, 9.80 ± 1.70 km, 10.73 ± 1.86 km and 1.83 ± 0.91 km for the base, mid-cloud, top height, and the thickness, respectively. Seasonal variations in cirrus geometrical properties show a maximum/minimum in summer/winter for all cirrus geometrical parameters. The mean cirrus lidar ratio for all cirrus cases in our study was ～ 25 ± 17 sr, with a smooth seasonal trend. The cirrus optical depth ranged from 0.001 to 2.475, with a mean of 0.34 ± 0.33. Sub-visual, thin, and dense cirrus were observed in ～12%, 43%, and 45%of the cases, respectively. More frequent, thicker cirrus clouds occurred in summer than in any other season. The properties of cirrus cloud over the site are compared with other lidar-based retrievals of midlatitude cirrus cloud properties.  相似文献   

12.
The oceanic bottom boundary-layer model of Weatherly and Martin (1978) is used to study the vertical structure of the eddy diffusivity in a region with initially imposed bottom mixed-layer thickness. Because of near-bottom oceanic features, such as the Cold Filament (Weatherly and Kelley, 1982) and cold eddies (Ebbesmeyer et al., 1988), the bottom mixed-layer thickness is not the sole result of boundary-layer mixing; this is the incentive for this study. For a given geostrophic forcing and imposed mixed-layer depth, a formula for the eddy diffusion coefficient is found. This parameterization of the eddy diffusivity improves previous formulas used in oceanic and atmospheric boundary layers in the upper portion of the boundary layer. A simple model of a Cold Filament-like feature demonstrates the structure of the bottom boundary layer, the bottom mixed layer, and the relation between the two. A lens-like cross section of cold blobs, often used in analytical models, may be inappropriate if bottom friction is important.  相似文献   

13.
We investigate dominant processes modulating the coastal West African atmospheric boundary layer during August and September 2006. We evaluated boundary-layer attributes using upper air soundings, tower-based observations, and information from the European Centre for Medium-Range Weather Forecasts reanalyses. Boundary-layer thermodynamics exhibited continental and maritime attributes in response to influences from regional onshore (sea to land) flows and local land–atmosphere exchanges of energy and moisture. Onshore flows transported maritime air inland and gave rise to deep (>1 km) nighttime mixed layers whose heat and moisture content resulted in maximum virtual potential temperatures of 306 K and specific humidities up to 20 g kg−1. The presence of the Saharan Air Layer corresponded with capping inversions greater than 4 K and lapse rates exceeding 7 K km−1 above the mixed layer. Mixed layers at these times became deeper than expected (≈1 km) because dust layer events were often concurrent with strong onshore flows. Despite diurnally variable land–atmosphere fluxes of sensible and latent heat that reached maximum values of 200 and 400 W m−2, respectively, the mixed-layer depth exhibited little diurnal variation due to the influences of onshore flows. Daytime heating of the land, the upward transport of moisture, and onshore flows produced boundary layers with high convective available potential energy that often exceeded 3,000 J kg−1. These results demonstrate that the atmospheric boundary-layer thermodynamics in western Senegal can be favorable for storm development during both day and night. Mesoscale and regional models applied in this region should include several processes controlling the boundary-layer attributes to realistically estimate the energy available for storm development.  相似文献   

14.
A slab mixed-layer model with zero-order entrainment for both temperature and humidity is developed in order to examine the relative magnitude of advective and turbulence flux convergence effects. The model formulation provides an analytic function for the ratio of surface-layer to entrainment-layer humidity flux. Model results are compared with measured mixed-layer properties over one day at a coastal location. It is concluded that the model is highly successful at simulating the mixed-layer depth, and mean mixed-layer humidity. It is suggested that a first-order model may be more appropriate for the latter half of the day when the mixed-layer depth is decreasing due to the dominance of advection over vertical turbulence flux convergence.  相似文献   

15.
The purpose of this paper is to test the ability of two quite different models to simulate the combined spatial and temporal variability of the internal boundary layer in an area of complex terrain and coastline during one day. The simple applied slab model of Gryning and Batchvarova, and the Colorado State University Regional Atmospheric Modelling System (CSU-RAMS) are tested by comparison with data gathered during a field study (called Pacific '93) of photochemical pollution in the Lower Fraser Valley of British Columbia, Canada. The data utilised here are drawn from tethered balloon flights, free flying balloon ascents, and downlooking lidar operated from an aircraft flown at roughly 3500 m above sea level. Both models are found to represent the temporal and spatial development of the internal boundary-layer depth over the Lower Fraser Valley very well, and reproduce many of the finer details revealed by the measurements.  相似文献   

16.
Inverse methods are widely used in various fields of atmospheric science. However, such methods are not commonly used within the boundary-layer community, where robust observations of surface fluxes are a particular concern. We present a new technique for deriving surface sensible heat fluxes from boundary-layer turbulence observations using an inverse method. Doppler lidar observations of vertical velocity variance are combined with two well-known mixed-layer scaling forward models for a convective boundary layer (CBL). The inverse method is validated using large-eddy simulations of a CBL with increasing wind speed. The majority of the estimated heat fluxes agree within error with the proscribed heat flux, across all wind speeds tested. The method is then applied to Doppler lidar data from the Chilbolton Observatory, UK. Heat fluxes are compared with those from a mast-mounted sonic anemometer. Errors in estimated heat fluxes are on average 18 %, an improvement on previous techniques. However, a significant negative bias is observed (on average $-63\,\%$ ) that is more pronounced in the morning. Results are improved for the fully-developed CBL later in the day, which suggests that the bias is largely related to the choice of forward model, which is kept deliberately simple for this study. Overall, the inverse method provided reasonable flux estimates for the simple case of a CBL. Results shown here demonstrate that this method has promise in utilizing ground-based remote sensing to derive surface fluxes. Extension of the method is relatively straight-forward, and could include more complex forward models, or other measurements.  相似文献   

17.
Long-term record of global distribution of ozone during 1979 to 2001, from Total Ozone Mapping Spectrometer (TOMS), over a tropical urban environment has been analyzed and compared with ground measurements. Increase in atmospheric UV-absorbing aerosol loading has been observed after 1991. TOMS columnar ozone during 1979 to 2001 suggested a clear Gaussian pattern of minimum concentration in winter months and maximum in summer months. TOMS ozone showed good correlation with the ground measured columnar ozone during winter months and negative correlation with Sunburning Ultraviolet (SUV) (280–370 nm), UVA and aerosol optical depth (AOD).  相似文献   

18.
利用2012年海南岛沿海6个常规气象站、2个海岛站的逐时风向、风速资料,分别对全年以及不同季节内近地面风速大小、风速日变化以及风向频率分布等进行了统计分析.结果表明:2012年全年海南岛沿海近地面风速约在1.8~5.7 m/s之间,其中三亚站风速最大,冬季高达6.5 m/s,大部分站点夏季风速最弱,最大风速出现在春、冬季;海南岛南部沿海风速大于北部,东部大于西部;各站24 h风速基本呈现白天大、夜晚小的典型特征,由于所处地形、植被独特,三亚部分季节风速呈现相反的日变化特征;全年各站基本存在两个盛行风向,大部分站点近地面风向与南海季风的风向变化较为一致,夏季以南风、西南风为主,冬季以北风、东北风为主;各季沿海近地面风向南北部差异较大,东西部差异较小,随着季节转变,南部沿海盛行风转向最明显,东西部次之,北部则不明显.  相似文献   

19.
The strongest large-scale intraseasonal (30–110 day) sea surface temperature (SST) variations in austral summer in the tropics are found in the eastern Indian Ocean between Australia and Indonesia (North-Western Australian Basin, or NWAB). TMI and Argo observations indicate that the temperature signal (std. ~0.4 °C) is most prominent within the top 20 m. This temperature signal appears as a standing oscillation with a 40–50 day timescale within the NWAB, associated with ~40 Wm?2 net heat fluxes (primarily shortwave and latent) and ~0.02 Nm?2 wind stress perturbations. This signal is largely related to the Madden-Julian Oscillation. A slab ocean model with climatological observed mixed-layer depth and an ocean general circulation model both accurately reproduce the observed intraseasonal SST oscillations in the NWAB. Both indicate that most of the intraseasonal SST variations in the NWAB in austral winter are related to surface heat flux forcing, and that intraseasonal SST variations are largest in austral summer because the mixed-layer is shallow (~20 m) and thus more responsive during that season. The general circulation model indicates that entrainment cooling plays little role in intraseasonal SST variations. The larger intraseasonal SST variations in the NWAB as compared to the widely-studied thermocline-ridge of the Indian Ocean region is explained by the larger convective and air-sea heat flux perturbations in the NWAB.  相似文献   

20.
A comprehensive planetary boundary-layer (PBL) and synoptic data set is used to isolate the mechanisms that determine the vertical shear of the horizontal wind in the convective mixed layer. To do this, we compare a fair-weather convective PBL with no vertical shear through the mixed layer (10 March 1992), with a day with substantial vertical shear in the north-south wind component (27 February). The approach involves evaluating the terms of the budget equations for the two components of the vertical shear of the horizontal wind; namely: the time-rate-of-change or time-tendency term, differential advection, the Coriolis terms (a thermal wind term and a shear term), and the second derivative of the vertical transport of horizontal momentum with respect to height (turbulent-transport term). The data, gathered during the 1992 STorm-scale Operational and Research Meteorology (STORM) Fronts Experiments Systems Test (FEST) field experiment, are from gust-probe aircraft horizontal legs and soundings, 915-MHz wind profilers, a 5-cm Doppler radar, radiosondes, and surface Portable Automated Mesonet (PAM) stations in a roughly 50 × 50 km boundary-layer array in north-eastern Kansas, nested in a mesoscale-to-synoptic array of radiosondes and surface data.We present evidence that the shear on 27 February is related to the rapid growth of the convective boundary layer. Computing the shear budget over a fixed depth (the final depth of the mixed layer), we find that the time-tendency term dominates, reflecting entrainment of high-shear air from above the boundary layer. We suggest that shear within the mixed layer occurs when the time-tendency term is sufficiently large that the shear-reduction terms – namely the turbulent-transport term and differential advection terms – cannot compensate. In contrast, the tendency term is small for the slowly-growing PBL of 10 March, resulting in a balance between the Coriolis terms and the turbulent-transport term. Thus, the thermal wind appears to influence mixed-layer shear only indirectly, through its role in determining the entrained shear.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号