共查询到20条相似文献，搜索用时 484 毫秒
1.
The Helvetic nappes in the Swiss Alps form a classic fold-and-thrust belt related to overall NNW-directed transport. In western
Switzerland, the plunge of nappe fold axes and the regional distribution of units define a broad depression, the Rawil depression,
between the culminations of Aiguilles Rouge massif to the SW and Aar massif to the NE. A compilation of data from the literature
shows that, in addition to thrusts related to nappe stacking, the Rawil depression is cross-cut by four sets of brittle faults:
(1) NE-SW striking normal faults, (2) NW-SE striking normal faults and joints, (3) ENE-WSW striking and (4) WNW-ESE striking
normal plus dextral oblique-slip faults. Fault set 1 was probably initiated during sedimentation and reactivated during nappe
stacking, whereas the other fault sets formed after emplacement of the Helvetic nappes. We studied in detail two well-exposed
parallel fault zones from set 4, the Rezli fault zones (RFZ) in the Wildhorn Nappe. They are SW-dipping oblique-slip faults
with a total displacement across the two fault zones of ~200 m vertically and ~680 m horizontally. The fault zones crosscut
four different lithologies: limestone, intercalated marl and limestone, marl and sandstone. The internal architecture of the
RFZ strongly depends on the lithology in which they developed. In the limestones, they consist of extension veins, stylolites,
cataclasites and cemented gouge, in the intercalated marls and limestones of shear zones, brittle fractures and chaotic folds,
in the marls of anastomosing shear zones, pressure solution seams and veins and in the sandstones of coarse breccia, brittle
faults and extension veins. Sharp, discrete fault planes within the broader fault zones cross-cut all lithologies. Fossil
fault zones in the Rezli area can act as a model for studying processes still occurring at deeper levels in this seismically
active region. 相似文献
2.
A.H.F. Robertson 《地学学报》1990,2(4):333-339
In northern Euboea (Eastern Greece), Late Cretaceous platform carbonates of the Pelagonian Zone pass depositionally upwards into Maastrichtian hemipelagic limestones, possibly reflecting a rifting event in the adjacent Neotethys. This is followed by a c. 1 km-thick unit of siliciclastic turbidites, debris flows and detached limestone blocks. Thrust intercalations of ophiolitic rocks comprise altered pillow basalts and ultramafic rocks with ophicalcite. Calcite veins in sheared serpentinite contain planktonic foraminifera and the ophicalcite is directly overlain, with a depositional contact, by Globotruncana-bearing pelagic limestones and calciturbidites of Maastrichtian age. The ophiolitic rocks are interpreted as Late Cretaceous oceanic crust and mantle, that formed at a fracture zone, or rifted spreading axis within a Neotethyan, Vardar basin to the east. During the Early Tertiary (Palaeocene–Eocene), the Neotethyan basin began to close, with development of a subduction-accretion complex, mainly comprising sheared, trench-type sandstones, associated with ophiolitic slices. In response to trench/margin collision, the Pelagonian carbonate platform foundered and limestone debris flows and olistoliths were shed into a siliciclastic foreland basin. Suturing of the Neotethyan ocean basin then resulted in westwards thrusting of oceanic units over the foreland basin, thrusting of slices of inferred Late Cretaceous Pelagonian carbonate platform slope and large-scale recumbent folding. 相似文献
3.
克拉苏构造带盐下超深层埋深大于6500 m的断背斜圈闭,白垩系砂岩储层内部裂缝普遍发育且分布复杂,对储层产能影响较大,目前仍然缺乏有效的裂缝发育模式指导裂缝带建模。本文通过钻、测井资料及物理模拟实验,分析了盐下断背斜内裂缝类型及空间分布规律:(1)盐下深层断背斜裂缝带可以分为"挤压剪切型、拱张型与调节型"三种成因类型,挤压剪切型裂缝带主要分布于断背斜翼部,受推覆作用而成,平面呈近EW走向或NW-SE走向。拱张型则主要发育于背斜核部,受控于断背斜拱张作用,平面近EW走向,调节型裂缝带则发育于断背斜的构造转换部位,呈近SN走向;(2)物理模拟实验证明拱张型裂缝带受褶皱褶曲度控制,剪切型、调节型裂缝带则受逆冲断层断距控制,根据断背斜拱升角及垂直断距变化可以预测裂缝带的平面分布;(3)地质资料和物理模拟实验证明"调节裂缝带"及"拱张裂缝带"张开程度最大,有利于改善超深层储层的储集性能,这类裂缝带的单井天然气产量较高。 相似文献
4.
Structural and paleostress analyses carried out on a kilometre-sized outcrop of allochthonous shallow-water carbonate units of the southern Apennines allowed us to unravel a superposed deformation pattern associated with plate convergence. The reconstructed tectonic evolution involves: (i) early extensional faulting and fracturing associated with bending of the foreland lithosphere during forebulge and foredeep stages (including the development of both ‘tangential’ and ‘radial’ normal fault and tensile fractures; Early-Middle Miocene); (ii) large-scale thrusting and folding (Late Miocene); (iii) transcurrent faulting (including two distinct sub-stages characterized by different remote stress fields; Pliocene-Early Pleistocene), and (iv) extensional faulting (late Quaternary). Stage (i) normal faults – generally occurring as conjugate sets – and related fractures and veins are variably deformed and overprinted by later horizontal shortening. Despite having experienced such a long and complex structural history, the studied carbonates are characterized by a ‘background’ fracture network – including two joint/vein sets orthogonal to each other and to bedding – that appears to be associated with the early fault sets that formed during the first (foredeep/forebulge-related) deformation stage. Therefore, away from younger (Late Miocene to Quaternary) fault zones, the permeability structure of the studied carbonates appears to be essentially controlled by the early, inherited fracture network. As a similar fracture network is likely to characterize also the buried Apulian Platform carbonates, representing the reservoir units for major oil fields in southern Italy, our results also bear possible implications for a better understanding of fluid flow in the subsurface and related hydrocarbon production. 相似文献
5.
Faults in carbonates are well known sources of upper crustal seismicity throughout the world. In the outer sector of the Northern Apennines, ancient carbonate-bearing thrusts are exposed at the surface and represent analogues of structures generating seismicity at depth. We describe the geometry, internal structure and deformation mechanisms of three large-displacement thrusts from the km scale to the microscale. Fault architecture and deformation mechanisms are all influenced by the lithology of faulted rocks. Where thrusts cut across bedded or marly limestones, fault zones are thick (tens of metres) and display foliated rocks (S-CC′ tectonites and/or YPR cataclasites) characterized by intense pressure-solution deformation. In massive limestones, faulting occurs in localized, narrow zones that exhibit abundant brittle deformation. A general model for a heterogeneous, carbonate-bearing thrust is proposed and discussed. Fault structure, affected by stratigraphic heterogeneity and inherited structures, influences the location of geometrical asperities and fault strain rates. The presence of clay minerals and the strain rate experienced by fault rocks modulate the shifting from cataclasis-dominated towards pressure-solution-dominated deformation. Resulting structural heterogeneity of these faults may mirror their mechanical and seismic behaviour: we suggest that seismic asperities are located at the boundaries of massive limestones in narrow zones of localized slip whereas weak shear zones constitute slowly slipping portions of the fault, reflecting other types of “aseismic” behaviour. 相似文献
6.
乌鲁木齐山前坳陷逆断裂-褶皱带及其形成机制 总被引：66，自引：9，他引：57
乌鲁木齐山前坳陷位于天山新生代再生造山带北侧,南以准噶尔南缘断裂与天山相隔,内部发育了几排逆断裂 背斜带,每一排构造带又由多个逆断裂 背斜组成。最南的齐古逆断裂 背斜带形成于中生代末,其北的玛纳斯逆断裂背斜带包含霍尔果斯、玛纳斯和吐谷鲁逆断裂背斜,形成于上新世末、早更新世初,受上、下２ 个滑脱面和断坡的控制,形成上、下２ 个背斜。再向北的独山子逆断裂背斜带由独山子、哈拉安德和安集海逆断裂背斜组成,形成于早、中更新世之间,主逆断裂向下在８ ～９ ｋｍ 深处的侏罗系中变为近水平滑脱面。此外,在独山子和吐谷鲁背斜的西北和东北还分别发育有正在形成之中的西湖和呼图壁隆起。研究了这些逆断裂 背斜带的地表和深部的构造特征、二维和三维几何学及运动学后指出,它们是在天山向准噶尔盆地扩展过程中发育于近水平滑脱面和不同断坡上的断展褶皱,独山子和安集海逆断裂 背斜的水平缩短量分别为２ ９００ ,１ ３５０ ｍ ,缩短速率分别为３９７ ,１８７ ｍ ｍ／ ａ。霍尔果斯、玛纳斯、吐谷鲁逆断裂 背斜的水平缩短量分别为５ ９００ ,６ ５００ ,６ ０００ ｍ ,相应的缩短速率分别为２０２,２２３ ,２０６ ｍ ｍ／ａ,准噶尔南缘断裂和乌鲁木齐山前坳陷第四纪? 相似文献
7.
The Lehong zinc-lead deposit is one of the new-found large Zn-Pb deposits in the Sichuan- Yunnan-Guizhou Zn-Pb poly-metallic mineralization area. The ore-bodies of the Lehong deposit are strictly controlled by structures, and the fault tectonites can be divided into four groups which include morbruk rock, cataclastic rock and tectonic breccia. The mechanical properties of the faults suggest that there are five tectonic systems formed in the Caledonian-early Hercynian, Indosinian-early Yanshanian, mid-Yanshanian, late Yanshanian and Himalayan periods, respectively. The Lehong fault and the Qiaojia-Lianfeng fault are two important ore-controlling structures which might have acted as channel ways of the ore fluids. The ores are hosted in the subordinary fracture zone, joint fracture zone and interlayer fault zones in trailing folds of the Lehong fault and the Baobaoshang syncline and Jinjiagou anticline. Hence, the Lehong deposit is a tectonic -controlled ore deposit. These research do not only lay a foundation for studying deposit genesis and ore-finding direction in the Lehong deposit, but also provides important enlightenments for the ore-finding prognosis of lead-zinc deposits in northwestern Guizhou ore concentration district. © 2018, Science Press. All right reserved. 相似文献
8.
ABSTRACT The pelagic sediments of the Semail Ophiolite are depositionally overlain by ophiolite-derived sediments of the Zabyat Formation, dominated by matrix-supported rudites, with subordinate arenites and lutites. The detritus was locally derived from the ophiolite, in a deep marine environment indicated by both underlying and overlying pelagic carbonates. The Zabyat rocks are restricted to fault zones in the ophiolite which were active during emplacement. They are interpreted as debris shed from the sub-vertical fault zones during the initial disruption of the Semail ocean floor, prior to the final emplacement on to the Arabian continental margin. This interpretation places constraints on possible mechanisms of ophiolite emplacement. 相似文献
9.
库车新生代构造性质和变形时间 总被引：126，自引：6，他引：120
库车构造位于南天山古生代碰撞造山带之南,为塔里木盆地最北的一个构造带。它自北而南可分为边缘逆冲（ 隐伏构造楔） 、斯的克背斜带、北部线性背斜带、拜城盆地、南部背斜带。每个背斜带又包含有若干逆冲断层相关褶皱,它们是断层转折褶皱、断层传播褶皱、滑脱褶皱、断层传播 滑脱混生褶皱、双重逆冲构造、突发构造、三角带构造。底部逆冲断层向南变浅,堆叠逆冲岩席向南变薄,总体上形成一个向南的逆冲构造楔。逆冲断层在斯的克背斜带侵位最早（２５ Ｍａ） ,在北部线性背斜带为１６９ Ｍａ,拜城盆地中的大宛其背斜为３６ Ｍａ,南部背斜带为５３ Ｍａ（ 北部） 和１８ Ｍａ（ 南部） ,变形作用向南变新。库车构造是印 藏板块碰撞的内陆构造响应,是二叠纪前陆盆地复活而成的再生前陆盆地变形带 相似文献
10.
《International Geology Review》2012,54(9):840-849
The eastern Pontide magmatic arc extends ～600 km in an E-W direction along the Black Sea coast and was disrupted by a series of fault systems trending NE-SW, NW-SE, E-W, and N-S. These fault systems are responsible for the formation of diachronous extensional basins, rift or pull-apart, in the northern, southern, and axial zones of the eastern Pontides during the Mesozoic. Successive extensional or transtensional tectonic regimes caused the abortive Liassic rift basins and the Albian and Campanian pull-apart basins with deep-spreading troughs in the southern and axial zones. Liassic, Albian, and Campanian neptunian dikes, which indicate extensional tectonic regimes, crop out within the Paleozoic granites near Kale, Gumushane, and the Malm–Lower Cretaceous platform carbonates in Amasya and Gumushane. These neptunian dikes correspond to extensional cracks that are filled and overlain by the fossiliferous red pelagic limestones. Multidirectional Liassic neptunian dikes are consistent with the general trend of the paleofaults (NE-SW, NW-SE, and E-W), and active dextral North Anatolian fault (NAF) and sinistral Northeast Anatolian fault (NEAF) systems. The Albian neptunian dikes in Amasya formed in the synthetic oblique left-lateral normal faults of the main fault zone that runs parallel to the active North Anatolian fault zone (NAFZ). Kinematic interpretation of the Liassic and Albian neptunian dikes suggests N-S extensional stress or northward movement of the Pontides along the conjugate fracture zones parallel to the NAFZ and NEAFZ. This northward movement of the Pontides in Liassic and Albian times requires left-lateral and right-lateral slips along the conjugate NAFZ and Northeast Anatolian fault zones (NEAFZ), respectively, in contrast to the recent active tectonics that have been accommodated by N-S compressional stress. On the other hand, mutual relationships between the neptunian dikes and the associated main fault zone of Campanian age extending in an E-W direction in the Kale area, Gumushane suggest the existence of a main left-lateral transtensional wrench zone. This system might be accommodated by the counterclockwise convergence of the Turkish plate with the Afro-Arabian plate relative to the Eurasian plate, and the southward oblique subduction of Paleotethys beneath the eastern Pontide magmatic arc during the Mesozoic. 相似文献
11.
Large NE–SW oriented asymmetric inversion anticlines bounded on their southeastern sides by reverse faults affect the exposed Mesozoic and Cenozoic sedimentary rocks of the Maghara area (northern Sinai). Seismic data indicate an earlier Jurassic rifting phase and surface structures indicate Late Cretaceous-Early Tertiary inversion phase. The geometry of the early extensional fault system clearly affected the sense of slip of the inverted faults and the geometry of the inversion anticlines. Rift-parallel fault segments were reactivated by reverse slip whereas rift-oblique fault segments were reactivated as oblique-slip faults or lateral/oblique ramps. New syn-inversion faults include two short conjugate strike-slip sets dissecting the forelimbs of inversion anticlines and the inverted faults as well as a set of transverse normal faults dissecting the backlimbs. Small anticline–syncline fold pairs ornamenting the steep flanks of the inversion anticlines are located at the transfer zones between en echelon segments of the inverted faults. 相似文献
12.
位于扬子板块西南缘的右江盆地是我国卡林型金矿的集中分布区之一,素有滇-黔-桂"金三角"之称.泥堡金矿是右江盆地西北侧一个大型矿床,矿区构造主要有NEE向泥堡背斜、二龙抢宝背斜和同方向的F1、F3、F4、F5和F9断层,以及产于F1断层下盘的层间破碎带等.详细构造调查和新近勘查资料的综合研究表明:F1、F5和F9为逆冲断... 相似文献
13.
塔里木盆地北部塔河油田奥陶系加里东期岩溶作用及其油气地质意义 总被引：1，自引：0，他引：1
详细的钻井地质学、地球物理和地球化学研究表明,塔河油田南部奥陶系内部和顶部发育多幕次的加里东期岩溶作用,主要表现在奥陶系内部牙形石带缺失、钻井放空和泥浆漏失、地震剖面上奥陶统反射波组底部上超和项部削截,以及溶洞充填方解石的Sr同位素特征等方面.加里东期岩溶储层主要受不整合面、断裂、岩性和古地貌等因素控制,表现出明显的断控和层控特征.由此预测该储层发育区位于古风化壳剥蚀区、加里东期断裂发育区和滩相储层发育区的叠合部位,主要位于阿克库勒凸起的轴部倾没端和塔河西南部、东南部的北东向、近南北向断裂发育区. 相似文献
14.
详细的钻井地质学、地球物理和地球化学研究表明,塔河油田南部奥陶系内部和顶部发育多幕次的加里东期岩溶作用,主要表现在奥陶系内部牙形石带缺失、钻井放空和泥浆漏失、地震剖面上奥陶统反射波组底部上超和顶部削截,以及溶洞充填方解石的Sr同位素特征等方面。加里东期岩溶储层主要受不整合面、断裂、岩性和古地貌等因素控制,表现出明显的断控和层控特征。由此预测该储层发育区位于古风化壳剥蚀区、加里东期断裂发育区和滩相储层发育区的叠合部位,主要位于阿克库勒凸起的轴部倾没端和塔河西南部、东南部的北东向、近南北向断裂发育区。 相似文献
15.
This study presents a comparative, field-based hydrogeological characterization of exhumed, inactive fault zones in low-porosity Triassic dolostones and limestones of the Hochschwab massif, a carbonate unit of high economic importance supplying 60 % of the drinking water of Austria’s capital, Vienna. Cataclastic rocks and sheared, strongly cemented breccias form low-permeability (<1 mD) domains along faults. Fractured rocks with fracture densities varying by a factor of 10 and fracture porosities varying by a factor of 3, and dilation breccias with average porosities >3 % and permeabilities >1,000 mD form high-permeability domains. With respect to fault-zone architecture and rock content, which is demonstrated to be different for dolostone and limestone, four types of faults are presented. Faults with single-stranded minor fault cores, faults with single-stranded permeable fault cores, and faults with multiple-stranded fault cores are seen as conduits. Faults with single-stranded impermeable fault cores are seen as conduit-barrier systems. Karstic carbonate dissolution occurs along fault cores in limestones and, to a lesser degree, dolostones and creates superposed high-permeability conduits. On a regional scale, faults of a particular deformation event have to be viewed as forming a network of flow conduits directing recharge more or less rapidly towards the water table and the springs. Sections of impermeable fault cores only very locally have the potential to create barriers. 相似文献
16.
浙江“常山式”萤石矿床特征及成矿模式 总被引：1，自引：0，他引：1
"常山式"萤石矿床是近年在钦杭成矿带发现并被评价的一种新类型矿床,与产于碳酸盐岩中的充填交代及层控型萤石矿床不同,其矿体赋存位置及矿石特征有其独特性。以往勘查的矿体主要分布在岩前短轴背斜的南东翼、岩前岩体与寒武系碳酸盐岩外接触带。位于背斜转折端的苦麻岭矿床的发现,丰富了"常山式"萤石矿床的成矿理论。研究表明,寒武系碳酸盐岩岩性差异与成矿关系并不密切,矿体顶底板Ca F2含量特征说明成矿作用以充填为主。燕山晚期高氟岩体侵位是矿床最重要的控制因素,岩体外接触带的"虚脱冒落"构造及层间构造带为主要控矿构造。通过矿床地质特征及成矿规律研究,总结了矿床成因,建立了成矿模式,为浙西北乃至华南地区寻找同类型矿床提供了新思路。 相似文献
17.
The Early Cretaceous carbonate carbon isotope stratigraphy established in pelagic limestones is marked by several pronounced excursions towards positive δ13C values. We investigated a biostratigraphically and palaeomagnetically calibrated Aptian section to see whether C isotope stratigraphy could be recognized in shallow-water carbonates. The chosen carbonate platform sections are located in southern Italy and have been dated by biostratigraphy. Bulk samples, chosen from the Barremian-Albian part of the sequence, were analysed for their O and C isotope compositions. The C isotope curve established shows two major positive excursions which can be correlated with the synchronous and globally recognized Aptian C isotope events. The data provide evidence that C isotope stratigraphy can be used as a powerful correlation tool between pelagic and shallow-water limestone sequences. 相似文献
18.
Syn-rift shallow-marine carbonates of Late Aptian to Early Albian age in the southern Maestrat Basin (E Spain) register the thickest Aptian sedimentary record of the basin, and one of the most complete carbonate successions of this age reported in the northern Tethyan margin. The host limestones (Benassal Formation) are partially replaced by dolostones providing a new case study of fault-controlled hydrothermal dolomitization. The syn-rift sediments filled a graben controlled by normal basement faults. The Benassal Fm was deposited in a carbonate ramp with scarce siliciclastic input. The lithofacies are mainly characterized by the presence of orbitolinid foraminifera, corals and rudist bivalves fauna. The succession is stacked in three transgressive–regressive sequences (T–R) bounded by surfaces with sequence stratigraphic significance. The third sequence, which is reported for the first time in the basin, is formed by fully marine lithofacies of Albian age and represents the marine equivalent to the continental deposits of the Escucha Fm in the rest of the basin.The dolomitization of the host rock is spatially associated with the basement faults, and thus is fault-controlled. The dolostone forms seismic-scale stratabound tabular geobodies that extend several kilometres away from the fault zones, mostly in the hanging wall blocks, and host Mississippi Valley Type (MVT) deposits. The dolostones preferentially replaced middle to inner ramp grain-dominated facies from the third T–R sequences consisting of bioclastic packestones and peloidal grainstones. Field and petrology data indicate that the replacement took place after early calcite cementation and compaction, most likely during the Late Cretaceous post-rift stage of the basin. The dolostone registers the typical hydrothermal paragenesis constituted by the host limestone replacement, dolomite cementation and sulfide MVT mineralization. The Aptian succession studied provides a stratigraphic framework that can be used for oil exploration in age-equivalent rocks, especially in the València Trough, offshore Spain. Moreover, this new case study constitutes a world class outcrop analogue for similar partially stratabound, dolomitized limestone reservoirs worldwide. 相似文献
19.
Maura Bussolotto Antonio Benedicto Chiara Invernizzi Luca Micarelli Valrie Plagnes Giovanni Deiana 《Journal of Structural Geology》2007,29(12):2017-2037
The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw. 相似文献
20.
查册桥矿区位于江南过渡带,包括牛头高家金矿床、程檀金矿床、路源金矿点和东边金矿化点、杨梅尖金矿点.其中牛头高家金矿是安徽省首次发现的具一定规模的红土型金矿.研究区主体位于东至断裂与高坦断裂带交汇处及其两侧,三岗尖-杨美桥背斜核部及北翼.区内存在多个重要的赋矿层位,主要包括南华系休宁组、南沱组,震旦系蓝田组,寒武系黄柏岭组、杨柳岗组,奥陶系仑山组、东至组.高坦断裂带、兰程畈断裂带、奥陶系/志留系间的推覆-滑覆断层界面均是重要的控岩控矿构造,区内岩浆岩主要受其控制,物化探异常也主要沿其分布.通过对矿床地质特征总结,并结合前人研究成果,对找矿潜力进行分析,认为区内具有寻找低温热液型-叠改型、层控夕卡岩型、岩浆热液脉型金、铜、钨、钼、银、铅锌等矿化的潜力. 相似文献