首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 218 毫秒
1.
The southern Rif cordillera front, between Fes and Meknes, is formed by the Prerif Ridges, which constitute a thrust and fold belt, in contact with the Saïss foreland basin. Geological evidence and regional GPS network data support recent and active tectonics of this Alpine cordillera, with a top-to-the-S-SW motion with respect to stable Africa. A local non-permanent GPS network was installed in 2007 around Fes to constrain the present-day activity of the mountain front. Six GPS sites are located in the Prerif mountain front (jbel Thratt and jbel Zalarh), the Saïss basin and the foreland constituted by the tabular Middle Atlas. Measurements of the GPS network in 2007, 2009 and 2012, over a five year span, seem to indicate that this region is tectonically active and is subjected to significant horizontal motions: (i) a regional displacement toward the SW with respect to stable Africa, showing an average rate of 2 mm/yr; (ii) a southwestward convergent motion between the jbel Thratt with respect to the Saïss basin and the eastern Zalarh ridge, with an average rate of about 4 mm/yr; and (iii) moderate NNE–SSW divergent dextral motion between the Saïss basin and the northern front of the tabular Middle Atlas with an average rate of about 1–2 mm/yr. The regional southwestward motion is related to the activity of the NE–SW sinistral North Middle Atlas-Kert fault zone, which follows the Moroccan Hot Line. Convergence between the Prerif ridges, located at the southern edge of the Rif, and the Saïss basin is accommodated by ENE–WSW striking northward dipping reverse sinistral faults and south vergent folds. In addition, increasing deformation toward the western ridges is in agreement with the stepped mountain front and the development of the arched structures of the Prerif ridges. Normal faults located south of the Saïss basin are responsible for local extension. Whereas the most active deformation occurs in the southern front of the jbel Thratt near Fes, the Saïss foreland basin and the Middle Atlas foreland have only moderate to low tectonic activity, as evidenced by geological and GPS data.  相似文献   

2.
This paper provides the structural analysis of the Chefchaouen area in the northern Rif. Here the Dorsale Calcaire superposes, by means of an excellently exposed thrust fault, onto the Predorsalian succession in turn tectonically covering the Massylian Unit. Hanging wall carbonates of the Dorsale Calcaire Unit form a WSW-verging regional fold with several parasitic structures, deformed by late reverse faults in places indicating an ENE vergence. A 200 m thick shear zone characterizes the upper part of the Predorsalian succession, located at footwall of the Dorsale Calcaire Unit. Here the dominantly pelitic levels are highly deformed by (i) C′ type shear bands indicating a mean WSW tectonic transport and (ii) conjugate extensional shear planes marking an extension both orthogonal and parallel to the shear direction. The Massylian Unit is characterized by a strain gradient increasing toward the tectonic contact with the overlying Predorsalian succession, where the dominantly pelitic levels are so highly deformed so as appearing as a broken formation. Such as the previous succession, conjugate extensional shear bands and normal faults indicate a horizontal extension parallel to the thrust front synchronous with the mainly WSW-directed overthrusting. The whole thrust sheet pile recorded a further shortening, characterized by a NW–SE direction, expressed by several reverse and thrust faults and related folds. Finally strike-slip and normal faults were the last deformation structures recorded in the analyzed rocks. A possible tectonic evolution for these successions is provided. In the late Burdigalian, the Dorsale Calcaire Unit tectonically covered the Predorsalian succession and together the Massylian Unit. The latter two successions were completely detached from their basement and accreted in the orogenic wedge within a general NE–SW shortening for the analyzed sector of the northern Rif. At lithosphere scale the thrust front migration was driven by roll back and slab tear mechanisms producing a synchronous arching and related counterclockwise rotation of the tectonic prism along the African margin. Radial displacement involved extension parallel to the thrust front well-recorded in the analyzed rocks. The NE–SW shortening, probably acting in the Tortonian–Pliocene interval, was related to the final compression of the Rif Chain resulting in out-of-sequence thrusts affecting the whole orogenic belt.  相似文献   

3.
The intermontane Ronda Basin, currently located in the Western Betics External Zones, started as an embayment of the Betic foreland basin during the Tortonian. We have characterized a post-Serravallian, basin-related deformation event that overprinted the former fold-and-thrust belt. Updated structural and kinematic maps allow us to identify NW–SE basinward-dipping normal faults at the southwestern and northeastern boundaries of the basin and NE–SW shortening structures (large-scale folds and reverse faults) affecting both the outcropping basement and partially the basin infill. In order to test the possible tectonic activity of these structures during the last 5 Ma, exhaustive geomorphologic analyses in the Ronda Basin area have been done. This included the qualitative study of relief and drainage network, together with the characterization of quantitative indices (SLk, Smf, Vf and HI). These results obtained from this analysis are coherent with structural data and suggest that the identified post-Serravallian structures were active up to at least 5 Ma. We also conclude that the Ronda Basin was generated by along strike segmentation of the relief in the Western Betics induced by NE–SW (arc-parallel) stretching accompanied with NW–SE shortening. In the NW basin boundary, the strain was partitioned into ENE–WSW dextral strike-slip faults and NE–SW shortening structures, which gave rise to a Messinian transpressive structural high that disconnected the former Ronda Basin from its parental foreland basin.  相似文献   

4.
Geological, geodetic and seismological data have been analyzed in order to frame the Lipari–Vulcano complex (Aeolian archipelago, southern Italy) into the geodynamic context of the southeastern Tyrrhenian Sea. It is located at the northern end of a major NNW–SSE trending right-lateral strike-slip fault system named “Aeolian–Tindari–Letojanni” which has been interpreted as a lithospheric discontinuity extending from the Aeolian Islands to the Ionian coast of Sicily and separating two different tectonic domains: a contractional one to the west and an extensional one to the north-east. Structural field data consist of structural measurements performed on well-exposed fault planes and fractures. The mesostructures are mostly represented by NW–SE striking normal faults with a dextral-oblique component of motion. Minor structures are represented by N–S oriented joints and tension gashes widespread over the whole analyzed area and particularly along fumarolized sectors. The analyzed seismological dataset (from 1994 to 2013) is based on earthquakes with magnitude ranging between 1.0 and 4.8. The hypocenter distribution depicts two major alignments corresponding to the NNW–SSE trending Aeolian–Tindari–Letojanni fault system and to the WNW–ESE oriented Sisifo–Alicudi fault system. GPS data analysis displays ∼3.0 mm/yr of active shortening between the two islands, with a maximum shortening rate of about 1.0 × 10−13 s−1, between La Fossa Caldera and south of Vulcanello. This region is bounded to the north by an area where the maximum values of shear strain rates, of about 0.7 × 10−13 s−1 are observed. This major change occurs in the area south of Vulcanello that is also characterized by a transition in the way of the vertical axis rotation. Moreover, both the islands show a clear subsidence process, as suggested by negative vertical velocities of all GPS stations which exhibit a decrease from about −15 to −7 mm/yr from north to south. New data suggest that the current kinematics of the Lipari–Vulcano complex can be framed in the tectonic context of the eastward migrating Sisifo–Alicudi fault system. This is dominated by transpressive tectonics in which contractional and minor extensional structures can coexist with strike-slip motion.  相似文献   

5.
The North Anatolian Fault Zone (NAFZ), which marks the boundary between Anatolia and the Eurasian plate, is one of the world's most seismically active structures. Although the eastern part of NAFZ has high seismic hazard, there is a lack of geodetic information about the present tectonics of this region. Even though many scientists would like to study this area, geographical and logistical problems make performing scientific research difficult. In order to investigate contemporary neotectonic deformation on the eastern NAFZ and in its neighborhood, a relatively dense Global Positioning System (GPS) monitoring network was established in 2003. Geodetic observations were performed in three GPS campaigns in an area of 350 km × 200 km with 12-month intervals. In addition, 14 new GPS stations were measured far from the deforming area. Since this region includes the intersection of the NAFZ and the East Anatolian Fault Zone (EAFZ), deformation is complex and estimating seismic hazard is difficult. One important segment is the Yedisu segment and it has not broken since the 1784 earthquake. After the 1992 Erzincan and 2003 Pulumur earthquakes, the Coulomb stress loading on the Yedisu segment of the NAFZ has increased significantly, emphasizing the need to monitor this region. We computed the horizontal velocity field with respect to Eurasia and strain rates field as well. GPS-derived velocities relative to Eurasia are in the range of 16–24 mm/year, which are consistent with the regional tectonics. The principal strain rates were derived from the velocity field. Results show that strain is accumulating between the NAFZ and EAFZ along small secondary fault branches such as the Ovacik Fault (OF).  相似文献   

6.
This study provides evidence for post-5 Ma shortening in the transition area between the Dinarides fold-and-thrust belt and the Pannonian Basin and reviews possible earthquake sources for the Banja Luka epicentral area (northern Bosnia and Herzegovina) where the strongest instrumentally recorded earthquake (ML 6.4) occurred on 27 October 1969. Geological, geomorphological and reflection seismic data provide evidence for a contractional reactivation of Late Palaeogene to Middle Miocene normal faults at slip rates below 0.1 mm/a. This reactivation postdates deposition of the youngest sediments in the Pannonian Basin of Pontian age (c. 5 Ma). Fault plane solutions for the main 1969 Banja Luka earthquake (ML 6.4) and its largest foreshock (ML 6.0) indicate reverse faulting along ESE–WNW-striking nodal planes and generally N–S trending pressure axes. The spatial distribution of epicentres and focal depths, analyses of the macroseismic field and fault-plane solutions for several smaller events suggest on-going shortening in the internal Dinarides. Seismic deformation of the upper crust is also associated with strike-slip faults, likely related to the NE–SW trending, sinistral Banja Luka fault. Possibly, this fault transfers contraction between adjacent segments of the Dinarides thrust system. The study area represents the seismically most active region of the Dinarides apart from the Adriatic Sea coast and the bend zone around Zagreb. We propose that on-going thrusting in the internal Dinarides thrust system takes up a portion of the current Adria–Europe convergence.  相似文献   

7.
The Al Hoceima Mw 6.4 earthquake of 24 February 2004 that occurred in the eastern Rif region of Morocco already hit by a large event in May 1994 (Mw 5.9) has been followed by numerous aftershocks in the months following the event. The aftershock sequence has been monitored by a temporary network of 17 autonomous seismic stations during 15 days (28 March–10 April) in addition to 5 permanent stations of the Moroccan seismic network (CNRST, SPG, Rabat). This network allowed locating accurately about 650 aftershocks that are aligned in two directions, about N10-20E and N110-120E, in rough agreement with the two nodal planes of the focal mechanism (Harvard). The aftershock alignments are long enough, about 20 km or more, to correspond both to the main rupture plane. To further constrain the source of the earthquake main shock and aftershocks (mb > 3.5) have been relocated thanks to regional seismic data from Morocco and Spain. While the main shock is located at the intersection of the aftershock clouds, most of the aftershocks are aligned along the N10-20E direction. This direction together with normal sinistral slip implied by the focal mechanism is similar with the direction and mechanisms of active faults in the region, particularly the N10E Trougout oblique normal fault. Indeed, the Al Hoceima region is dominated by an approximate ENE-SSW direction of extension, with oblique normal faults. Three major 10–30 km-long faults, oriented NNE-SSW to NW-SE are particularly clear in the morphology, the Ajdir and Trougout faults, west and east of the Al Hoceima basin, respectively, and the NS Rouadi fault 20 km to the west. These faults show clear evidence of recent vertical displacements during the late Quaternary such as uplifted alluvial terraces along Oued Rihs, offset fan surfaces by the Rouadi fault and also uplifted and tilted abandoned marine terraces on both sides of the Al Hoceima bay.However, the N20E direction is in contrast with seismic sources identified from geodetic inversions, which favour but not exclusively the N110-120E rupture directions, suggesting that the 1994 and 2004 events occurred on conjugate faults. In any event, the recent seismicity is thus concentrated on sinistral N10-20E or N110-120E dextral strike-slip faults, which surface expressions remain hidden below the 3–5 km-thick Rif nappes, as shown by the tomographic images build from the aftershock sequence and the concentration of the seismicity below 3 km. These observations may suggest that strain decoupling between the thrusted cover and the underlying bedrock and highlights the difficulty to determine the source properties of moderate events with blind faults even in the case of good quality recorded data.  相似文献   

8.
Seismic analysis and geochemical interpretations provide evidence that two separate hydrothermal cells circulate within the greater Lassen hydrothermal system. One cell originates south to SW of Lassen Peak and within the Brokeoff Volcano depression where it forms a reservoir of hot fluid (235–270 °C) that boils to feed steam to the high-temperature fumarolic areas, and has a plume of degassed reservoir liquid that flows southward to emerge at Growler and Morgan Hot Springs. The second cell originates SSE to SE of Lassen Peak and flows southeastward along inferred faults of the Walker Lane belt (WLB) where it forms a reservoir of hot fluid (220–240 °C) that boils beneath Devils Kitchen and Boiling Springs Lake, and has an outflow plume of degassed liquid that boils again beneath Terminal Geyser. Three distinct seismogenic zones (identified as the West, Middle, and East seismic clusters) occur at shallow depths (< 6 km) in Lassen Volcanic National Park, SW to SSE of Lassen Peak and adjacent to areas of high-temperature (≤ 161 °C) fumarolic activity (Sulphur Works, Pilot Pinnacle, Little Hot Springs Valley, and Bumpass Hell) and an area of cold, weak gas emissions (Cold Boiling Lake). The three zones are located within the inferred Rockland caldera in response to interactions between deeply circulating meteoric water and hot brittle rock that overlies residual magma associated with the Lassen Volcanic Center. Earthquake focal mechanisms and stress inversions indicate primarily N–S oriented normal faulting and E–W extension, with some oblique faulting and right lateral shear in the East cluster. The different focal mechanisms as well as spatial and temporal earthquake patterns for the East cluster indicate a greater influence by regional tectonics and inferred faults within the WLB. A fourth, deeper (5–10 km) seismogenic zone (the Devils Kitchen seismic cluster) occurs SE of the East cluster and trends NNW from Sifford Mountain toward the Devils Kitchen thermal area where fumarolic temperatures are ≤ 123 °C. Lassen fumaroles discharge geothermal gases that indicate mixing between a N2-rich, arc-type component and gases derived from air-saturated meteoric recharge water. Most gases have relatively weak isotopic indicators of upper mantle or volcanic components, except for gas from Sulphur Works where δ13C–CO2, δ34S–H2S, and δ15N–N2 values indicate a contribution from the mantle and a subducted sediment source in an arc volcanic setting.  相似文献   

9.
We invert measurements of coseismic displacements from 139 continuously recorded GPS sites from the 2010, Jiashian, Taiwan earthquake to solve for fault geometry and slip distribution using an elastic uniform stress drop inversion. The earthquake occurred at a depth of ~ 23 km in an area between the Western Foothills fold-and-thrust belt and the crystalline high mountains of the Central Range, providing an opportunity to examine the deep fault structure under Taiwan. The inferred rupture plane is oblique to the prominent orientation of thrust faults and parallel to several previously recognized NW-striking transfer zones that appear to connect stepping thrusts. We find that a fault striking 318°–344° with dip of 26°–41° fits the observations well with oblique reverse-sinistral slip under a low stress drop of about 0.5 MPa. The derived geodetic moment of 2.92 × 1018 N-m is equivalent to a Mw = 6.24 earthquake. Coseismic slip is largely concentrated within a circular patch with a 10-km radius at the depth between 10 and 24 km and maximum slip of 190 mm. We suggest this earthquake ruptured the NW-striking Chishan transfer fault zone, which we interpret as a listric NE-dipping lateral ramp with oblique slip connecting stepping thrust faults (ramps). The inferred slip on the lateral ramp is considerably deeper than the 7–15 km deep detachment identified in previous studies of western Taiwan. We infer an active basal detachment under western Taiwan at a depth of at least ~ 20–23 km based on these inversion results. The earthquake may have nucleated at the base of the lateral ramp near the intersection with the basal detachment. Coulomb stress change calculations suggest that this earthquake moved several NE-striking active thrust faults in western Taiwan nearer to failure.  相似文献   

10.
Field data and seismic reflection profiles of various resolutions, calibrated by deep well logs, have been used to unravel the tectonic evolution of the Crati Basin (southern Italy). The study area is located in the northern portion of the Calabrian Arc, a well-developed arc-shaped feature of the circum-Mediterranean belts, consisting of a series of ophiolite-bearing tectonic units and overlying basement nappes. NW–SE oriented left-lateral strike-slip faults exerted a major control on the tectonic evolution of northern-central Calabria, from Middle Miocene to Lower Pleistocene times. Such faults, arranged in an en-échelon geometry and dissecting the pre-existing Late Oligocene–Early Miocene orogenic belt, led to a structural setting including major N-S striking synforms – as the offshore Paola Basin and the Crati Basin are interpreted based on our results – separated by a broad antiformal ridge. Since the Middle Pleistocene, both E- and W-dipping normal faults developed in the southernmost sector of the Crati Basin, probably as a consequence of both uplift of the orogenic edifice and Tyrrhenian back-arc extension. The pre-existing regional strike-slip faults became inactive in this sector of the belt. However, working as persistent barriers, it is envisaged here that they inhibited the southern propagation of the newly formed normal faults, which therefore propagated towards the north. A minimum value of cumulative displacement of ca. 600 m has been unraveled for the central sector of the Crati Basin since Middle Pleistocene times. This yields a vertical strain rate of ca. 0.9 mm/y during the last 700 ka.  相似文献   

11.
The goal of this paper is to study the velocity field and deformation parameters in Southern Spain and surrounding areas (Ibero-Maghrebian region) using GPS episodic measurements. Results are compared to those previously published as well as deformation parameters derived from seismic data. For this purpose, a geodetic GPS network of 12 stations was observed during eight field campaigns from 1998 to 2005 by the San Fernando Naval Observatory (ROA), Spain. Relative GPS velocities in the Gulf of Cadiz with respect to the stable part of Eurasia are ～4.1 mm/yr in a NW–SE to NNW–SSE direction. In the Betics, Alboran Sea and North of Morocco, velocities are ～4.4 mm/yr in a NW–SE direction, and they are ～2.3 mm/yr in a N–S direction in the eastern part of the Iberian Peninsula. These results are in agreement with the anticlockwise rotation of the African plate. GPS strain tensors are determined from the velocity model, to obtain a more realistic crustal deformation model. The Gulf of Cadiz is subjected to uniform horizontal compression in a NNW–SSE direction, with a rotation to N–S in the Alboran Sea and Northern Morocco. An extensional regime in a NW–SE direction, which rotates to W–E, is present in the Internal Betics area. In the Betic, Alboran Sea and North of Morocco regions we compare seismic deformation rates from shallow earthquakes with the determined GPS deformation rates. The comparison indicates a seismic coupling of 27%, while the remaining 73% might be generated in aseismic processes. Deformations measured in the Ibero-Maghrebian region with GPS could be interpreted in terms of either elastic loading or ductile deformation.  相似文献   

12.
We used GPS velocities from approximately 700 stations in western China to study the crustal deformation before the Wenchuan MS8.0 earthquake. The processing methods included analyses of the strain rate field, inversion of fault locking and the GPS velocity profiles. The GPS strain rate in the E-W direction in the Qinghai-Tibet block shows that extensional deformation was dominant in the western region of the block (west of 92.5° E), while compressive deformation predominated in the eastern region of the block (from 92.5° E to 100° E). On a regional scale, the hypocentral region of the Wenchuan earthquake was located at the edge of an intense compression deformation zone of about 1.9 × 10−8/a in an east-west direction. The characteristic deformation in the seismogenic fault was compressive with a dextral component. The compression deformation rate was greater in the fault's western region than in its eastern region, and the strain accumulation was very slow on the fault scale. The results of a fault locking inversion show that the locking fraction and slip deficit was greater in the middle-northern section of the seismogenic fault than in the southern section. The GPS velocity profile before the Wenchuan earthquake shows that the compression deformation was smaller than the dextral deformation, which is asymmetrical with respect to the distribution of co-seismic displacement. These deformation characteristics should provide some clues to the Wenchuan earthquake which occurred in the later period of the earthquake cycle.  相似文献   

13.
The Potiguar Basin is a ∼6,000 m thick aborted NE-trending rift that was formed during the Cretaceous in the continental margin of northeastern Brazil. Its ∼E–W-trending offshore faults form part of the successful continental margin rift that evolved into the South Atlantic Ocean. The region represents one of the most significant pre-Pangea breakup piercing points between eastern South America and West Africa. We used gravity, aeromagnetic, and geological data to assess the role of reactivated Precambrian shear zones and major terrain boundaries in the development of the Potiguar Basin from the Cretaceous to the Cenozoic. We also looked for possible links between these structures in northeastern Brazil and their continuation in West Africa. Our results indicate that the major fault systems of the Potiguar Basin were superimposed on the Precambrian fabric. Both gravity and magnetic maps show lineaments related to the shear zones and major terrain boundaries in the Precambrian crystalline basement, which also characterize the architecture of the rift. For example, the Carnaubais fault, the master fault of the rift system, represents the reactivation of the Portalegre shear zone, the major tectonic boundary between Precambrian terrains in the crystalline basement. In addition, part of the Moho topography is controlled by these shear zones and developed during the period of main rift extension in the Neocomian. The shear zones bounding the Potiguar rift system continue in West Africa around and underneath the Benue Basin, where fault reactivation also took place.  相似文献   

14.
  相似文献   

15.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

16.
Northeastern Brazil has experienced earthquake swarms, which include events up to mb = 5.2 in the last 30 years. Ground-rupturing events, however, have not been reported in the last 200 years. We have used a multidisciplinary approach to describe the geometry, kinematics, age, paleostress field, and paleoseismological significance of ground ruptures filled by clastic sediments in the region. Methods included GIS- and remote sensing-assisted structural mapping, borehole and resistivity sounding, grain size and X-ray analysis, and Optically Stimulated Luminescence (OSL) and Single-Aliquot Regenerative-Dose (SAR) chronology. Sediment-filled faults concentrate on the hanging wall of the Jundiaí fault, a 35 km long, NE-trending, late Cretaceous to Quaternary fault. These sediment-filled faults cut across Precambrian granites and overlying alluvial and colluvial deposits and exhibit steeply planar geometry. The largest faults exhibit sediment fills that extend downward to at least 20 m. The faults alternate between normal and right-oblique normal slip, which allowed the gravitational influx of unlithified gravels to gravelly sediments into the granites. Field evidence indicates seismogenic origin associated with multistage opening and infilling. On the basis of OSL and SAR chronology, we distinguish six generations of infills, which represent the main periods of fault activity: 8.0–9.0, 11.0–15.0, 16.0–24.0, 37.0–45.5, 65.0–67.9, and 84.5–93.5 ka. These dates suggest a 15.8 ka recurrence period. A few OSL dates may represent maximum ages due to poor bleaching of sediments, which implies that the recurrence period may be underestimated. We conclude that the Jundiaí fault has been continuously active in respect of surface-rupturing during at least the last ～100 ka. The size of the surface ruptures is consistent with earthquake magnitude M ～ 5.3, close to magnitudes observed in northeastern Brazil in the short instrumental and historical record. We suggest that seismogenic-fault recurrence in intraplate settings is longer than human settlement and should be assessed by multidisciplinary methods, mainly those that provide subsurface data and chronology of clastic sediments. Faults that trap sediments during movements are ideal places for these studies. The structures we describe here may have analogs in both modern and ancient intraplate settings.  相似文献   

17.
In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.  相似文献   

18.
We report the results of a joint analysis of aeromagnetic, topographic and tectonic data in central-eastern mainland Greece. The emphasis of the analysis is placed on the detection of coherent lineations (discontinuities), collocated and correlated with faulting structures detected by geological field observation. To this effect, edge detection and image enhancement were applied to digital aeromagnetic anomaly maps and digital elevation models, comprising bidirectional differentiation, wavelet transformation (imaging) and spatial decomposition/reconstruction in the wavenumber domain. The analysis facilitated the detection of significant topographic lineaments with NNE–SSW, ENE–WSW and ESE–WNW orientations. Respectively, the aeromagnetic data exhibit two families of significant NE–SW, and one family of ESE–WNW lineaments. The major aeromagnetic and topographic lineaments coincide and have comparable width scales of the order of 2–3 km, indicating that they are produced by significant discontinuities in the upper crust. The kinematics of the NE–SW faults varies between oblique-slip and strike-slip. These faults affect Neogene to Late Quaternary deposits and have been responsible for the formation of transverse depressions and horsts. This is also corroborated by focal plane solutions from small earthquakes recorded by local networks. The nature of these structures is not yet clear. However, they have been detected by diverse methodologies, they have considerable extent and are apparently active. These attributes suggest that they may possibly be related to the propagation and diffusion of the North Anatolian and North Aegean fault systems into the Greek mainland.  相似文献   

19.
This is an attempt to analyze the current lithospheric stress pattern in the Baikal rift in terms of nonlinear dynamics as an open self-organizing system in order to gain more insights into the general laws of regional seismicity. According to the suggested approach, the stress pattern inferred from seismic moments of 70,000 MLH ≥ 2.0 events that occurred in the region between 1968 and 1994 is presented as a phase portrait in the phase spaces of the seismic moments. The obtained phase portrait of the system evolution fits well a scenario with triple equilibrium bifurcation where stress bifurcations account for the frequency of M > 5.5 earthquakes. Extrapolation of the results into the nearest future indicates probability of such a bifurcation (a catastrophe of stress), i.e., there is growing risk that M ≈ 7 events may happen in the region within a few years.  相似文献   

20.
The Main Ethiopian Rift (MER) offers a complete record of the time–space evolution of a continental rift. We have characterized the brittle deformation in different rift sectors through the statistical analysis of a new database of faults obtained from the integration between satellite images and digital elevation models, and implemented with field controls. This analysis has been compared with the results of lithospheric-scale analogue models reproducing the kinematical conditions of orthogonal and oblique rifting. Integration of these approaches suggests substantial differences in fault architecture in the different rift sectors that in turn reflect an along-axis variation of the rift development and southward decrease in rift evolution. The northernmost MER sector is in a mature stage of incipient continental rupture, with deformation localised within the rift floor along discrete tectono-magmatic segments and almost inactive boundary faults. The central MER sector records a transitional stage in which migration of deformation from boundary faults to faults internal to the rift valley is in an incipient phase. The southernmost MER sector is instead in an early continental stage, with the largest part of deformation being accommodated by boundary faults and almost absent internal faults. The MER thus records along its axis the typical evolution of continental rifting, from fault-dominated rift morphology in the early stages of extension toward magma-dominated extension during break-up. The extrapolation of modelling results suggests that a variable rift obliquity contributes to the observed along-axis variations in rift architecture and evolutionary stage, being oblique rifting conditions controlling the MER evolution since its birth in the Late Miocene in relation to a constant post ca. 11 Ma ~ N100°E Nubia–Somalia motion.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号