共查询到20条相似文献，搜索用时 31 毫秒
1.
The Morro dos Seis Lagos niobium deposit (2897.9 Mt at 2.81 wt% Nb2O5) is associated with laterites formed by the weathering of siderite carbonatite. This iron-rich lateritic profile (>100 m in thickness) is divided into six textural and compositional types, which from the top to the base of the sequence is: (1) pisolitic laterite, (2) fragmented laterite, (3) mottled laterite, (4) purple laterite, (5) manganiferous laterite, and (6) brown laterite. All the laterites are composed mainly of goethite (predominant in the lower and upper varieties) and hematite (predominant in the intermediate types, formed from goethite dehydroxylation). The upper laterites were reworked, resulting in goethite formation. In the manganiferous laterite (10 m thick), the manganese oxides (mainly hollandite, with associated cerianite) occur as veins or irregular masses, formed in a late event during the development of the lateritic profile, precipitated from a solution with higher oxidation potential than that for Fe oxides, closer to the water table. Siderite is the source for the Mn. The main Nb ore mineral is Nb-rich rutile (with 11.26–22.23 wt% Nb2O5), which occurs in all of the laterites and formed at expense of a former secondary pyrochlore, together with Ce-pyrochlore (last pyrochore before final breakdown), Nb-rich goethite and minor cerianite. The paragenesis results of lateritization have been extremely intense. Minor Nb-rich brookite formed from Nb-rich rutile occurs as broken spherules with an “oolitic” (or Liesegang ring structure). Nb-rich rutile and Nb-rich brookite incorporate Nb following the [Fe3+ + (Nb, Ta) for 2Ti] substitution and both contain up to 2 wt% WO3. The laterites have an average Nb2O5 content of 2.91 wt% and average TiO2 5.00 wt% in the upper parts of the sequence. Average CeO2 concentration increases with increasing depth, from 0.12 wt% in the pisolitic type to 3.50 wt% in the brown laterite. HREE concentration is very low. 相似文献
2.
Most skarn deposits are closely related to granitoids that intruded into carbonate rocks. The Cihai (>100 Mt at 45% Fe) is a deposit with mineral assemblages and hydrothermal features similar to many other typical skarn deposits of the world. However, the iron orebodies of Cihai are mainly hosted within the diabase and not in contact with carbonate rocks. In addition, some magnetite grains exhibit unusual relatively high TiO2 content. These features are not consistent with the typical skarn iron deposit. Different hydrothermal and/or magmatic processes are being actively investigated for its origin. Because of a lack of systematic studies of geology, mineral compositions, fluid inclusions, and isotopes, the genetic type, ore genesis, and hydrothermal evolution of this deposit are still poorly understood and remain controversial.The skarn mineral assemblages are the alteration products of diabase. Three main paragenetic stages of skarn formation and ore deposition have been recognized based on petrographic observations, which show a prograde skarn stage (garnet-clinopyroxene-disseminated magnetite), a retrograde skarn stage (main iron ore stage, massive magnetite-amphibole-epidote ± ilvaite), and a quartz-sulfide stage (quartz-calcite-pyrite-pyrrhotite-cobaltite).Overall, the compositions of garnet, clinpyroxene, and amphibole are consistent with those of typical skarn Fe deposits worldwide. In the disseminated ores, some magnetite grains exhibit relatively high TiO2 content (>1 wt.%), which may be inherited from the diabase protoliths. Some distinct chemical zoning in magnetite grains were observed in this study, wherein cores are enriched in Ti, and magnetite rims show a pronounced depletion in Ti. The textural and compositional data of magnetite confirm that the Cihai Fe deposit is of hydrothermal origin, rather than associated with iron rich melts as previously suggested.Fluid inclusions study reveal that, the prograde skarn (garnet and pyroxene) formed from high temperature (520–600 °C), moderate- to high-salinity (8.1–23.1 wt.% NaCl equiv, and >46 wt.% NaCl equiv) fluids. Massive iron ore and retrograde skarn assemblages (amphibole-epidote ± ilvaite) formed under hydrostatic condition after the fracturing of early skarn. Fluids in this stage had lower temperature (220°–456 °C) and salinity (8.4–16.3 wt.% NaCl equiv). Fluid inclusions in quartz-sulfide stage quartz and calcite also record similar conditions, with temperature range from 128° to 367 °C and salinity range from 0.2 to 22.9 wt.% NaCl equiv. Oxygen and hydrogen isotopic data of garnet and quartz suggest that mixing and dilution of early magmatic fluids with external fluids (e.g., meteoric waters) caused a decrease in fluid temperature and salinity in the later stages of the skarn formation and massive iron precipitation. The δ18O values of magnetite from iron ores vary between 4.1 and 8.5‰, which are similar to values reported in other skarn Fe deposits. Such values are distinct from those of other iron ore deposits such as Kiruna-type and magmatic Fe-Ti-V deposits worldwide. Taken together, these geologic, geochemical, and isotopic data confirm that Cihai is a diabase-hosted skarn deposit related to the granitoids at depth. 相似文献
3.
Bangpu deposit in Tibet is a large but poorly studied Mo-rich (~ 0.089 wt.%), and Cu-poor (~ 0.32 wt.%) porphyry deposit that formed in a post-collisional tectonic setting. The deposit is located in the Gangdese porphyry copper belt (GPCB), and formed at the same time (~ 15.32 Ma) as other deposits within the belt (12 ~ 18 Ma), although it is located further to the north and has a different ore assemblage (Mo–Pb–Zn–Cu) compared to other porphyry deposits (Cu–Mo) in this belt. Two distinct mineralization events have been identified in the Bangpu deposit which are porphyry Mo–(Cu) and skarn Pb–Zn mineralization. Porphyry Mo–(Cu) mineralization in the deposit is generally associated with a mid-Miocene porphyritic monzogranite rock, whereas skarn Pb–Zn mineralization is hosted by lower Permian limestone–clastic sequences. Coprecipitated pyrite and sphalerite from the Bangpu skarn yield a Rb–Sr isochron age of 13.9 ± 0.9 Ma. In addition, the account of garnet decreases and the account of both calcite and other carbonate minerals increases with distance from the porphyritic monzogranite, suggesting that the two distinct phases of mineralization in this deposit are part of the same metallogenic event.Four main magmatic units are associated with the Bangpu deposit, namely a Paleogene biotite monzogranite, and Miocene porphyritic monzogranite, diabase, and fine-grained diorite units. These units have zircon U–Pb ages of 62.24 ± 0.32, 14.63 ± 0.25, 14.46 ± 0.38, and 13.24 ± 0.04 Ma, respectively. Zircons from porphyritic monzogranite yield εHf(t) values of 2.2–8.7, with an average of 5.4, whereas the associated diabase has a similar εHf(t) value averaging at 4.7. The geochemistry of the Miocene intrusions at Bangpu suggests that they were derived from different sources. The porphyritic monzogranite has relatively higher heavy rare earth element (HREE) concentrations than do other ore-bearing porphyries in the GPCB and plots closer to the amphibolite lithofacies field in Y–Zr/Sm and Y–Sm/Yb diagrams. The Bangpu diabase contains high contents of MgO (> 7.92 wt.%), FeOt (> 8.03 wt.%) but low K2O (< 0.22 wt.%) contents and with little fractionation of the rare earth elements (REEs), yielding shallow slopes on chondrite-normalized variation diagrams. These data indicate that the mineralized porphyritic monzogranite was generated by partial melting of a thickened ancient lower crust with some mantle components, whereas the diabase intrusion was directly derived from melting of upwelling asthenospheric mantle. An ancient lower crustal source for ore-forming porphyritic monzogranite explains why the Bangpu deposit is Mo-rich and Cu-poor rather than the Cu–Mo association in other porphyry deposits in the GPCB because Mo is dominantly from the ancient crust.The Bangpu deposit has alteration zonation, ranging from an inner zone of biotite alteration through silicified and phyllic alteration zones to an outer propylitic alteration zone, similar to typical porphyry deposits. Some distinct differences are also present, for example, K-feldspar alteration at Bangpu is so dispersed that a distinct zone of K-feldspar alteration has not been identified. Hypogene mineralization at Bangpu is characterized by the early-stage precipitation of chalcopyrite during biotite alteration and the late-stage deposition of molybdenite during silicification. Fluid inclusion microthermometry indicates a change in ore-forming fluids from high-temperature (320 °C–550 °C) and high-salinity (17 wt.%–67.2 wt.%) fluids to low-temperature (213 °C–450 °C) and low-salinity (7.3 wt.%–11.6 wt.%) fluids. The deposit has lower δDV-SMOW (− 107.1‰ to − 185.8‰) values compared with other porphyry deposits in the GPCB, suggesting that the Bangpu deposit formed in a shallower setting and is associated with a more open system than is the case for other deposits in this belt. Sulfides at Bangpu yield δ34SV-CDT values of − 2.3‰ to 0.3‰, indicative of mantle-derived S implying that coeval mantle-derived mafic magma (e.g., diabase) simultaneously supplied S and Cu to the porphyry system at Bangpu. In comparison, the Pb isotopic compositions (206Pb/204Pb = 18.79–19.28, 207Pb/204Pb = 15.64–15.93, 208Pb/204Pb = 39.16–40.45) of sulfides show that other metals (e.g., Mo, Pb, Zn) were likely derived mainly from an ancient crustal source. Therefore, the formation of the Bangpu deposit can be explained by a two-stage model involving (1) the partial melting of an ancient lower crust triggered by invasion of asthenospheric mantle-derived mafic melts that provide heat and metal Cu and (2) the formation of the Bangpu porphyry Mo–Cu system, formed by magmatic differentiation in the overriding crust in a post-collisional setting. 相似文献
4.
The oolitic ironstones ore deposit of Jebel Ank (central Tunisia), is a simply folded stratiform ore body of about 2.5–8 m thickness located in the upper part of the epicontinental Souar Formation (Late Eocene) and is covered by the continental Segui Formation (Mio-Pliocene). The deposit contains about 20 Mt of ore with an average grade of 50% Fe. Generally, oolitic iron deposition occurs in shallow water lagoonal environments. The Jebel Ank deposit lies between two regional disconformities (Late Eocene and Miocene), and is evidence of a transitional stage at the end of regional regression before renewed transgression. The footwall of the oolitic iron ore-bearing bed consists of a fine-grained sandstone bed (10–20 cm-thick) pinching out laterally westward into green clays. The hanging wall is composed of thin-bedded limestone and clay alternations (2–3.5 m-thick).Iron occurs in the form of cryptocrystalline goethite with limited Al-Fe substitution. The goethite contains around 48% Fe, 5% Al and up to 1.5% P. Jarosite, alunite and manganese minerals (cryptomelane, psilomelane and manjiorite) are supergene secondary minerals, probably related to descending surface fluids. These manganese minerals occur as accessory minerals with the goethite and are most abundant at the lowermost part of the succession showing varied morphologies (local cement, space filling and free centimeter sized nodules). Fe-oolites in the deposit are similar to those documented in many other oolitic ironstone deposits. The dominant Fe-oolite type (>90%) has a concentrically laminated cortex with no nucleus. The nuclei of the oolites that do have a nucleus are most commonly detrital quartz grains.Major elements in high grade samples (Fe2O3 > 65%) vary within a limited range and show higher concentrations of SiO2 (average 7.85%) and Al2O3 (average 5.1%), with minor TiO2, MnO, MgO, Na2O, K2O, and SO3 (less than 1%). PAAS-normalized trace elements of bulk samples and Fe-oolite generally show similar behavior, both are enriched in V, Co, Ni, Mo, As, Zn, and Y and are depleted in Cu, Rb, Zr, Nb, Ba, and Hf. Anomalous V, Cr, Ni, Zn, and REE-Y are correlated with goethite. PAAS-normalized REE-Y patterns of both bulk samples and Fe-oolite show slight HREE enrichment, positive Ce with negative Y anomalies.The mineralogy (goethite and cryptomelane) along with the geochemistry (Si vs. Al; As + Cu + Mo + Pb + V + Zn vs. Ni + Co binary plots; Zn–Ni–Co triangular diagram, REE-Y content and patterns and Ce/Ce1 vs. Nd and Ce/Ce1 vs. YN/HoN binary plots) of the studied oolitic ironstone are congruent with a hydrogenetic type. While two possible sources of iron for Jebel Ank ironstone can be proposed: (i) submarine weathering of glauconite-rich sandstone and (ii) detrital iron from adjacent continental hinterland, the later is the more plausible source of iron, based on paleogeographic setting, the occurrence of fine sandstone underlying the iron level, occurrence of Mn-ores in the lower part of the Fe-ores succession, high phosphorous, zinc, ∑REE-Y concentrations and Y/Ho ratios, and low La/Ce ratios. 相似文献
5.
The Dexing deposit, located in the Circum-Pacific ore belt, is the largest porphyry copper deposit in eastern China. It is composed of 3 separate plutons, which host three mines: Tongchang, Fujiawu and Zhushahong mines. The porphyritic granodiorite samples studied in this investigation were collected from the Tongchang ore-forming pluton of this giant deposit. This paper presents electron microprobe analyses of biotite, apatite, amphibole, plagioclase, potassium feldspar and rehomogenized glassy melt inclusions from the Tongchang porphyritic granodiorites. Petrographic observations of the samples are consistent with portions of the granodioritic magma represented by our samples being overprinted by potassic hydrothermal fluid which variably altered these minerals.All of the studied micas are Mg-rich biotites. The biotites are separated into altered magmatic and secondary types based on their petrographic and geochemical characteristics. The phlogopite components of the secondary biotites are typically higher than those of the altered magmatic biotites, and the XMg values of all biotites correlate negatively with Cl contents, consistent with the Mg–Cl avoidance principle. The XMg values also correlate negatively with (K2O + Na2O + BaO), FeO and TiO2 for both generations of biotites. The calculated log (fH2O/fHCl) values (for 690 K) of the coexisting potassic fluids, which are determined from the altered magmatic biotite compositions, range from 4.43 to 4.67, and are very similar to those of other major porphyry deposits. However, the log(fH2O/fHF) and log(fHF/fHCl) values for the same batch of hydrothermal fluids are significant higher and lower than those of these other porphyry deposits, respectively.The Cl concentrations of amphiboles and melt inclusions range from 0.18 to 0.32 wt.% and 0.15 to 0.44 wt.%, respectively. Most apatites trapped in biotite and plagioclase phenocrysts display a bimodal Cl distribution: 0.19 to 1.35 wt.% and 1.48 to 3.73 wt.%. Similarly, the S contents of the apatite also show a distinct bimodal distribution reflecting the effects of variable anhydrite saturation during evolution of the Tongchang melt and variable dissolution of anhydrite by saline aqueous fluids. The Cl contents of the apatites from the Tongchang system are typically higher than those of other studied porphyry deposits. Furthermore, the Cl contents of the melt inclusions are at or very near the Cl saturation levels (0.36 to 0.46 wt.% at 850 °C and 50 MPa and 0.42 to 0.54 wt.% at 850 °C and 200 MPa) for these melt compositions at shallow crustal pressures. These findings suggest that the area of the granodioritic magma represented by our samples, and perhaps the bulk of the Tongchang granodioritic magma was rich in Cl. The melt inclusion compositions are consistent with a high-salinity, hydrosaline liquid being exsolved directly from the granodioritic melt directly. This high-salinity hydrosaline liquid was likely very efficient at dissolving, transporting and precipitating ore metals in the mineralizing magmatic–hydrothermal system. 相似文献
6.
Cu-rich massive sulfide deposits associated with mafic–ultramafic rocks in the southern portion of the Main Urals Fault (MUF) are characterized by variable enrichments in Ni (up to 0.45 wt.%), Co (up to 10 wt.%) and Au (up to 16 ppm in individual hand-specimens). The Cu (Ni–Co)-rich composition of MUF deposits, as opposed to the Cu (Zn)-rich composition of more eastward massive sulfide deposits of broadly similar age along the western flank of the Magnitogorsk arc, reflects the abundance of seafloor-exposed, Ni–Co-rich ultramafic rocks in the most external portion of the Early-Devonian Magnitogorsk forearc. Morphological, textural, and compositional differences between individual deposits are interpreted to be the result of the sulfide deposition style and, in part, of the original subseafloor lithology. One deposit produced by dominantly on-seafloor hydrothermal processes is characterized by pyrite–marcasite ≫ pyrrhotite, not so low Zn grades (occasionally up to 2 wt.%), abundant clastic facies and periodical superficial oxidation. Deposits produced by dominantly subseafloor hydrothermal processes are characterized by pyrrhotite > pyrite, very low Zn (generally < to ≪ 0.1 wt.%), volumetrically minor clastic facies, and multi-layer deposit morphology. Very low Ni/Co ratios in the on-seafloor deposit may indicate a dominant metal contribution from a mafic rather than ultramafic source. The sulfide mineralization was associated with extensive hydrothermal alteration of the host ultramafic and mafic rocks, leading to formation of abundant talc, talc–carbonate and chlorite rocks. Occurrence of large volumes of such altered lithotypes in ophiolitic belts may be considered as a potential searching criteria for MUF-type (Cu, Co, Ni)-deposits. In spite of the contrasting geodynamic environment, geological, geochemical, textural and mineralogical peculiarities of the MUF deposits in many respects are similar to those of ultramafic-hosted massive sulfide deposits along the Mid-Atlantic Ridge. In geological time, supra subduction-zone settings appear to have been more effective than mid-ocean ridge settings for preservation of ultramafic-hosted massive sulfide deposits. 相似文献
7.
Porphyry and skarn Cu–Fe–Au–Mo deposits are widespread in the Middle and Lower Yangtze River metallogenic belt (MLYMB), eastern China. The Matou deposit has long been regarded as a typical Cu–Mo porphyry deposit within Lower Yangtze part of the belt. Recently, we identified scheelite and wolframite in quartz veins in the Matou deposit, which is uncommon in other porphyry and skarn deposits in the MLYMB. We carried out detailed zircon U–Pb dating and geochemical and Sr–Nd–Hf isotopic studies of the granodiorite porphyry at Matou to define any differences from other ore-related granitoids. The porphyry shows a SiO2 content ranging from 61.85 wt.% to 65.74 wt.%, K2O from 1.99 wt.% to 3.74 wt.%, and MgO from 1.74 wt.% to 2.19 wt.% (Mg# value ranging from 45 to 55). It is enriched in light rare earth elements and large ion lithophile elements, but relatively depleted in Nb, Ta, Y, Yb and compatible trace elements (such as Cr, Ni, and V), with slight negative Eu anomalies (Eu/Eu* = 0.88–0.98) and almost no negative Sr anomalies. Results of electron microprobe analysis of rock-forming silicate minerals indicate that the Matou porphyry has been altered by an oxidized fluid that is rich in Mg, Cl, and K. The samples show relatively low εNd(t) values from −7.4 to −7.1, slightly high initial 87Sr/86Sr values from 0.708223 to 0.709088, and low εHf(t) values of zircon from −9.0 to −6.5, when compared with the other Cu–Mo porphyry deposits in the MLYMB. Zircon U–Pb dating suggests the Matou granodiorite porphyry was emplaced at 139.5 ± 1.5 Ma (MSWD = 1.8, n = 15), which is within the age range of the other porphyries in the MLYMB. Although geochemical characteristics of the Matou and other porphyries in the MLYMB are similar and all adakitic, the detrital zircons in the samples from Matou suggest that Archean lower crust (2543 ± 29 Ma, MSWD = 0.25, n = 5) was involved with the generation of Matou magma, which is different from the other porphyries in the belt. Our study suggests that the Matou granodiorite porphyry originated from partial melting of thickened lower crust that was delaminated into the mantle, similar to the other porphyries in the MLYMB, but it has a higher proportion of lower crustal material, including Archean rocks, which contributed to the formation of the porphyry and related W-rich magmatic-hydrothermal system. 相似文献
8.
Numerous magnetite–apatite deposits occur in the Ningwu and Luzong sedimentary basins along the Middle and Lower Yangtze River, China. These deposits are located in the contact zone of (gabbro)-dioritic porphyries with surrounding volcanic or sedimentary rocks and are characterized by massive, vein and disseminated magnetite–apatite ± anhydrite mineralization associated with voluminous sodic–calcic alteration. Petrologic and microthermometric studies on multiphase inclusions in pre- to syn-mineralization pyroxene and garnet from the deposits at Meishan (Ningwu basin), Luohe and Nihe (both in Luzong basin) demonstrate that they represent extremely saline brines (~ 90 wt.% NaClequiv) that were trapped at temperatures of about 780 °C. Laser ablation ICP-MS analyses and Raman spectroscopic studies on the natural fluid inclusions and synthetic fluid inclusions manufactured at similar P–T conditions reveal that the brines are composed mainly of Na (13–24 wt.%), K (7–11 wt.%), Ca (~ 7 wt.%), Fe (~ 2 wt.%), Cl (19–47 wt.%) and variable amounts of SO4 (3–39 wt.%). Their Cl/Br, Na/K and Na/B ratios are markedly different from those of seawater evaporation brines and lie between those of magmatic fluids and sedimentary halite, suggesting a significant contribution from halite-bearing evaporites. High S/B and Ca/Na ratios in the fluid inclusions and heavy sulfur isotopic signatures of syn- to post-mineralization anhydrite (δ34SAnh = + 15.2 to + 16.9‰) and pyrite (δ34SPy = + 4.6‰ to + 12.1‰) further suggest a significant contribution from sedimentary anhydrite. These interpretations are in line with the presence of evaporite sequences in the lower parts of the sedimentary basins.The combined evidence thus suggests that the magnetite–apatite deposits along the Middle and Lower Yangtze River formed by fluids that exsolved from magmas that assimilated substantial amounts of Triassic evaporites during their ascent. Due to their Fe-oxide dominated mineralogy, their association with large-scale sodic–calcic alteration and their spatial and temporal associations with subvolcanic intrusions we interpret them as a special type of IOCG deposits that is characterized by unusually high contents of Na, Ca, Cl and SO4 in the ore-forming fluids. Evaporite assimilation apparently led to the production of large amounts of high-salinity brine and thus to an enhanced capacity to extract iron from the (gabbro)-dioritic intrusions and to concentrate it in the form of ore bodies. Hence, we believe that evaporite-bearing sedimentary basins are more prospective for magnetite–apatite deposits than evaporite-free basins. 相似文献
9.
Bauxite deposits, traditionally the main source of aluminum, have been recently targeted for their remarkable contents in rare earth elements (REE). With ∑REE (lanthanoids + Sc + Y) concentrations systematically higher than ∼1400 ppm (av. = 1530 ppm), the Las Mercedes karstic bauxites in the Dominican Republic rank as one of the REE-richest deposits of its style.The bauxitic ore in the Las Mercedes deposit is mostly unlithified and has a homogeneous-massive lithostructure, with only local cross-stratification and graded bedding. The dominant arenaceous and round-grained texture is composed of bauxite particles and subordinate ooids, pisoids and carbonate clasts. Mineralogically, the bauxite ore is composed mostly of gibbsite and lesser amounts of kaolinite, hematite, boehmite, anatase, goethite, chromian spinel and zircon. Identified REE-minerals include cerianite and monazite-Ce, whose composition accounts for the steady enrichment in light- relative to medium- and heavy-REE of the studied bauxites.Considering the paleo-geomorphology of the study area, we propose that bauxites in the Las Mercedes deposit are the product of the erosion and deposition of lithified bauxites located at higher elevations in the Bahoruco ranges. Based on the available data, we suggest a mixed lithological source for the bauxite deposits at the district scale: bedrock carbonates and an igneous source of likely mafic composition. 相似文献
10.
Electron probe microanalysis and microscopy is a widely used modern analytical technique primarily for quantifying chemical compositions of solid materials and for mapping or imaging elemental distributions or surface morphology of samples at micrometer or nanometer-scale. This technique uses an electromagnetic lens-focused electron beam, generated from an electron gun, to bombard a sample. When the electron beam interacts with the sample, signals such as secondary electron, backscattered electron and characteristic X-ray are generated from the interaction volume. These signals are then examined by detectors to acquire chemical and imaging information of the sample. A unique part of an electron probe is that it is equipped with multiple WDS spectrometers of X-ray and each spectrometer with multiple diffracting crystals in order to analyze multiple elements simultaneously. An electron probe is capable of analyzing almost all elements (from Be to U) with a spatial resolution at or below micrometer scale and a detection limit down to a few ppm.Mineral inclusions in chromite from the Wafangdian kimberlite, Liaoning Province, China were used to demonstrate the applications of electron probe microanalysis and microscopy technique in characterizing minerals associated with ore deposits, specifically, in this paper, minerals associated with diamond deposit. Chemical analysis and SE and BSE imaging show that mineral inclusions in chromite include anhydrous silicates, hydrous silicates, carbonates, and sulfides, occurring as discrete or single mineral inclusions or composite multiple mineral inclusions. The chromite–olivine pair poses a serious problem in analysis of Cr in olivine using electron probe. Secondary fluorescence of Cr in chromite by Fe in olivine drastically increases the apparent Cr2O3 content of an olivine inclusion in a chromite. From the chemical compositions obtained using electron probe, formation temperatures and pressures of chromite and its mineral inclusions calculated using applicable geothermobarometers are from 46 kbar and 980 °C to 53 kbar and 1130 °C, which are within the stability field of diamond, thus Cr-rich chromite is a useful indication mineral for exploration of kimberlite and diamond deposit. A composite inclusion in chromite composed of silicate and carbonate minerals has a bulk composition of 33.2 wt.% SiO2, 2.5 wt.% Al2O3, 22.0 wt.% MgO, 7.5 wt.% CaO, 2.5 wt.% BaO, 0.8 wt.% K2O, 25.5 wt.% CO2, and 0.8 wt.% H2O, similar to the chemical composition of the Wafangdian kimberlite, suggesting that it is trapped kimberlitic magma. 相似文献
11.
The Yamansu skarn iron deposit is hosted in Early Carboniferous submarine lava flow and volcaniclastic rocks of the Yamansu Formation in Eastern Tianshan Mountains, NW China. The lava flows are predominantly basaltic, with minor andesites. Laser ablation inductively coupled plasma mass spectrometry (LAICP-MS) U–Pb zircon dating of the basalts and skarns yields almost coeval ages of 324.4 ± 0.94 and 323.47 ± 0.95 Ma, respectively. The basalts contain clinopyroxene and plagioclase phenocrysts with a considerable amount of Fe–Ti oxide minerals in the groundmass as interstitial phases, probably suggesting that olivine–, clinopyroxene- and plagioclase fractionated within the magma chamber. Geochemically, the basalts are characterized by slight variations in SiO2 (42.90–46.61 wt.%), P2O5 (0.08–0.12 wt.%), MnO (0.35–0.97 wt.%) and TiO2 (0.74–0.82 wt.%), and relatively large variations in CaO (6.93–15.13 wt.%), Al2O3 (14.71–19.93 wt.%), total Fe2O3 (8.14–12.66 wt.%) and MgO (4.96–8.52 wt.%). They possess flat to light rare earth element (REE)-depleted patterns and display variable degrees of depletions in high field-strength elements (HFSE), suggesting a transitional feature between MORB and arc volcanic rocks, and indicating a back-arc tectonic setting. Furthermore, the geochemical signature also suggests that the volcanic rocks of Yamansu Formation were produced by partial melting of the spinel-facies, asthenospheric mantle peridotite which had been metasomatized by slab-derived fluids. The broadly overlapping ages of the basalts and skarn mineralization suggests that the skarn formation in the Yamansu deposit is related to subaqueous volcanism. In combination with the available information including fluid inclusions and stable isotope data, we infer that the hydrothermal fluids that generated the skarns could be a mixture of evolved magma-derived fluids and convecting sea water driven by the heat from the shallow active magma chamber. The Yamansu basalts provided the source of iron for the skarn mineralization. We envisage the submarine volcanism, skarn alteration and iron mineralization in the Yamansu iron deposit as a continuous process, different from either conventional intrusion-related skarn type or submarine volcanic exhalation sedimentation type. 相似文献
12.
Modern massive sulfide deposits are known to occur in diverse tectonic settings and it is generally expected that hydrothermal deposits of similar geological settings shall have more or less similar mineralogical and geochemical signatures. However, the Mount Jourdanne sulfide deposits along the super-slow spreading Southwest Indian Ridge deviate from this common concept. These sulfide precipitates are Zn-rich (up to 35 wt.%) and are characterized by high concentrations of Pb (≤ 3.5 wt.%), As (≤ 1.1 wt.%), Ag (≤ 0.12 wt.%), Au (≤ 11 ppm), Sb (≤ 967 ppm), and Cd (≤ 0.2 wt.%) which are unusual for a modern sediment-free mid-oceanic ridge system. Therefore, we have reinvestigated the sulfide samples collected during the INDOYO cruise in 1998, in order to explain their unusual mineralogy and geochemical composition. The sulfide samples are polymetallic and are classified as: a) chimneys, b) mounds, and c) hydrothermal breccias. The chimneys are small tube-like symmetrical bodies (30–40 cm high; ~ 10 cm diameter) and consist mainly of sphalerite and less chalcopyrite, set in a matrix of late amorphous silica. The inner wall shows a late-stage colloform sphalerite containing co-precipitates of galena and/or Pb–As sulfosalts. In contrast, the mound samples are dominated either by Fe-sulfides (pyrite) or by a mixture of pyrite and chalcopyrite with less sphalerite, pyrrhotite, amorphous silica and barite. Both, the chimney and mound samples, are characterized by layering and mineral zonation. The hydrothermal breccias are highly altered and mineralogically heterogeneous. They consist of silicified basaltic material that are impregnated with sulfides and contain cm-sized chimney fragments within a matrix of low-temperature minerals such as sphalerite and pyrite. The latter fragments mainly consist of chalcopyrite with isocubanite lamellae. In addition, these breccias contain late-stage realgar, boulangerite, galena, Pb–As sulfosalts and barite that are mostly confined to vugs or fractures. At least five mineralogical associations are distinguished that indicate different thermal episodes ranging from black smoker mineralization conditions to cessation of the hydrothermal activity. Based on the mineralogical associations and established literature in this regard, it is inferred that the mineralization at Mt. Jourdanne occurred mainly in three temperature domains. Above 300 °C, the chalcopyrite (with isocubanite)–pyrrhotite association formed whereas the sphalerite dominated assemblage with much less chalcopyrite and pyrite formed around and below 300 °C. The late-stage mineralization (below 200 °C) contains colloform sphalerite, galena, Pb–As sulfosalts, realgar and barite. The unusual mineralogy and trace element chemistry for this modern VHMS deposit could be explained assuming hydrothermal leaching of some felsic differentiates underneath the basaltic cover and subsequent zone refining processes. 相似文献
13.
The Nanling Range (Southeast China) is well known for its wolframite-bearing-quartz-vein (WQV) tungsten deposit. This study focuses on the geochemistry and geochronology of zircons from the WQV and challenges the current view of the tungsten mineralization in the Nanling Range. The features of the WQV zircons include: (1) pale brown, murky brown, or orange-red color and translucence under microscope; (2) {110} + {101} type crystal form; (3) weak cathodoluminescence; (4) enrichment of Hf (ranging from 1.97 to 7.83 wt.% HfO2), U (ranging from 0.02 to 3.97 wt.% UO2), Th (ranging from 0 to 0.65 wt.% ThO2), and P (ranging from 0 to 1.82 wt.% P2O5); and (5) presence of solid (hydrothermal and ore minerals) and fluid inclusions. These features indicate that the WQV zircons crystallized from hydrothermal fluids during tungsten mineralization. The in-situ LA-ICPMS U–Pb results of the WQV zircons from five different tungsten deposits in the Nanling Range yield similar ages, ranging from 134.4 ± 1.9 Ma to 132.9 ± 1.5 Ma, approximately 20 million years younger than proposed tungsten ore ages (155 ± 5 Ma). Several mineralization characteristics and field observations also cast doubt on the current model — Nanling Range tungsten ore is the result of orthomagmatic processes. The zircon characterization method provided in this study could be applied to tungsten metallogenic research in other parts of the world. 相似文献
14.
The Upper Cretaceous Nakhlak epigenetic vein-type Pb(Ag) deposit is located 55 km northeast of the town of Anarak in Isfahan Province, Iran. The deposit contains 7 Mt of galena-barite ore with an average grade of 8.33% Pb, 0.38% Zn, and 72 ppm Ag. The ore mineralization occurs as stratabound, epigenetic, steeply dipping, east-west–trending veins in faulted- or fracture-controlled Upper Cretaceous Sadar carbonates. Galena and barite are the primary minerals. Minor sphalerite, tennantite-tetrahedrite, pyrite, and chalcopyrite occur as inclusions in galena. Cerussite with minor amounts of anglesite and plattnerite formed in the oxidized supergene zone. The ore and ore-related minerals were deposited in the hydrothermally dolomitized carbonate host rock containing saddle-shaped dolomite. Geochemically, the dolomitized carbonate host rocks are enriched in MgO, Fe2O3, MnO, Pb, Zn, and Ba, but depleted in CaO. The galena concentrate contains high values of Ag (932 ppm), Sb (342 ppm), Cu (422 ppm), As (91 ppm), and Zn (296 ppm); the presence of these trace elements indicates a low-temperature type of galena mineralization. This interpretation is corroborated by fluid inclusions containing 12.98 wt.% NaCl equivalent salinity; the inclusions homogenize at the low temperature of about 152.1 °C. The similarity between δ34S(V-CDT) values in Nakhlak barite and Permian–Triassic δ34S marine sulfate values indicates that the Nakhlak sulfur was probably provided from evaporates of Permian–Triassic age. The δ34S(V-CDT) values of galena and barite samples occupy the ranges of − 1.04‰ to + 8.62‰ and + 10.95‰ to + 13.71‰, respectively, and are similar to Mississippi Valley–type (MVT) deposits. The low-temperature basinal fluids, evaporate-originated sulfur, and fault- or fracture-controlled galena-rich veins in the Nakhlak deposit resemble the type of geological features documented in Pb-rich MVT deposits. 相似文献
15.
Magnetite is a common mineral in many ore deposits and their host rocks, and contains a wide range of trace elements (e.g., Ti, V, Mg, Cr, Mn, Ca, Al, Ni, Ga, Sn) that can be used for deposit type fingerprinting. In this study, we present new magnetite geochemical data for the Longqiao Fe deposit (Luzong ore district) and Tieshan Fe–(Cu) deposit (Edong ore district), which are important magmatic-hydrothermal deposits in eastern China.Textural features, mineral assemblages and paragenesis of the Longqiao and Tieshan ore samples have suggested the presence of two main mineralization periods (sedimentary and hydrothermal) at Longqiao, among which the hydrothermal period comprises four stages (skarn, magnetite, sulfide and carbonate); whilst the Tieshan Fe–(Cu) deposit comprises four mineralization stages (skarn, magnetite, quartz-sulfide and carbonate).Magnetite from the Longqiao and Tieshan deposits has different geochemistry, and can be clearly discriminated by the Sn vs. Ga, Ni vs. Cr, Ga vs. Al, Ni vs. Al, V vs. Ti, and Al vs. Mg diagrams. Such difference may be applied to distinguish other typical skarn (Tieshan) and multi-origin hydrothermal (Longqiao) deposits in the MLYRB. The fluid–rock interactions, influence of the co-crystallizing minerals and other physicochemical parameters, such as temperature and fO2, may have altogether controlled the magnetite trace element contents of both deposits. The Tieshan deposit may have had higher degree of fO2, but lower fluid–rock interactions and ore-forming temperature than the Longqiao deposit. The TiO2–Al2O3–(MgO + MnO) and (Ca + Al + Mn) vs. (Ti + V) magnetite discrimination diagrams show that the Longqiao Fe deposit has both sedimentary and hydrothermal features, whereas the Tieshan Fe–(Cu) deposit is skarn-type and was likely formed via hydrothermal metasomatism, consistent with the ore characteristics observed. 相似文献
16.
The northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt (NGPB), characterized by skarn and porphyry deposits, is one of the most important metallogenic belts in the Himalaya–Tibetan continental orogenic system. This belt extends for nearly four hundred kilometers along the Luobadui–Milashan Fault in the central Lhasa subterrane, and contains more than 10 large ore deposits with high potential for development. Three major types of mineralization system have been identified: skarn Fe systems, skarn/breccia Pb–Zn–Ag systems, and porphyry/skarn Mo–Cu–W systems. In this study, we conducted a whole-rock geochemical, U–Pb zircon geochronological, and in situ zircon Hf isotopic study of ore-forming rocks in the NGPB, specifically the Jiangga, Jiaduopule, and Rema skarn Fe deposits, and the Yaguila Pb–Zn–Ag deposit. Although some of these deposits (porphyry Mo systems) formed during the post-collisional stage (21–14 Ma), the majority (these three systems) developed during the main (‘soft collision’) stage of the India–Asia continental collision (65–50 Ma). The skarn Fe deposits are commonly associated with granodiorites, monzogranites, and granites, and formed between 65 and 50 Ma. The ore-forming intrusions of the Pb–Zn–Ag deposits are characterized by granite, quartz porphyry, and granite porphyry, which developed in the interval of 65–55 Ma. The ore-forming porphyries in the Sharang Mo deposit, formed at 53 Ma. The rocks from Fe deposits are metaluminous, and have relatively lower SiO2, and higher CaO, MgO, FeO contents than the intrusions associated with Mo and Pb–Zn–Ag mineralization, while the Pb–Zn–Ag deposits are peraluminous, and have high SiO2 and high total alkali concentrations. They all exhibit moderately fractionated REE patterns characterized by lower contents of heavy REE relative to light REE, and they are enriched in large-ion lithophile elements and relatively depleted in high-field-strength elements. Ore-forming granites from Fe deposits display 87Sr/86Sr(i) = 0.7054–0.7074 and εNd(t) = − 4.7 to + 1.3, whereas rocks from the Yaguila Pb–Zn–Ag deposit have 87Sr/86Sr(i) = 0.7266–0.7281 and εNd(t) = − 13.5 to − 13.3. In situ Lu–Hf isotopic analyses of zircons from Fe deposits show that εHf(t) values range from − 7.3 to + 6.6, with TDM(Hf)C model ages of 712 to 1589 Ma, and Yaguila Pb–Zn–Ag deposit has εHf(t) values from − 13.9 to − 1.3 with TDM(Hf)C model ages of 1216 to 2016 Ma. Combined with existing data from the Sharang Mo deposit, we conclude that the ore-forming intrusions associated with the skarn Fe and porphyry Mo deposits were derived from partial melting of metasomatized lithospheric mantle and rejuvenated lower crust beneath the central Lhasa subterrane, respectively. Melting of the ancient continental material was critical for the development of the Pb–Zn–Ag system. Therefore, it is likely that the source rocks play an important role in determining the metal endowment of intrusions formed during the initial stage of the India–Asia continental collision. 相似文献
17.
The Dabu Cu-Mo porphyry deposit is situated in the southern part of the Lhasa terrane within the post-collisional Gangdese porphyry copper belt (GPCB). It is one of several deposits that include the Qulong and Zhunuo porphyry deposits. The processes responsible for ore formation in the Dabu deposit can be divided into three stages of veining: stage I, quartz–K-feldspar (biotite) ± chalcopyrite ± pyrite, stage II, quartz–molybdenite ± pyrite ± chalcopyrite, and stage III, quartz–pyrite ± molybdenite. Three types of fluid inclusions (FIs) are present: liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid bearing multi-phase (S-type) inclusions. The homogenization temperatures for the FIs from stages I to III are in the ranges of 272–475 °C, 244–486 °C, and 299–399 °C, and their salinities vary from 2.1 to 49.1, 1.1 to 55.8, and 2.9 to 18.0 wt% NaCl equiv., respectively. The coexistence of S-type, V-type and L-type FIs in quartz of stage I and II with similar homogenization temperatures but contrasting salinities, indicate that fluid boiling is the major factor controlling metal precipitation in the Dabu deposit. The ore-forming fluids of this deposit are characterized by high temperature and high salinity, and they belong to a H2O–NaCl magmatic–hydrothermal system. The H–O–S–Pb isotopic compositions indicate that the ore metals and fluids came primarily from a magmatic source linked to Miocene intrusions characterized by high Sr/Y ratios, similar to other porphyry deposits in the GPCB. The fluids forming the Dabu deposit were rich in Na and Cl, derived from metamorphic dehydration of subducted oceanic slab through which NaCl-brine or seawater had percolated. The inheritance of ancient subduction-associated arc chemistry, without shallow level crustal assimilation and/or input of the meteoric water, was responsible for the generation of fertile magma, as well as CO2-poor and halite-bearing FIs associated with post-collisional porphyry deposits. The estimated mineralization depths of Qulong, Dabu and Zhunuo deposits are 1.6–4.3 km, 0.5–3.4 km and 0.2–3.0 km, respectively, displaying a gradual decrease from eastern to western Gangdese. Deep ore-forming processes accounted for the generation of giant-sized Qulong deposit, because the exsolution of aqueous fluids with large fraction of water and chlorine in deep or high pressure systems can extract more copper from melts than those formed in shallow systems. However, the formation of small-sized Dabu deposit can be explained by a single magmatic event without additional replenishment of S, metal, or thermal energy. In addition, the ore-forming conditions of porphyry Cu–Mo deposits in GPCB are comparable to those of porphyry Cu ± Au ± Mo deposits formed in oceanic subduction-related continental or island arcs, but differ from those of porphyry Mo deposit formed in the Dabie-Qinling collisional orogens. The depth of formation of the mineralization and features of primary magma source are two major controls on the metal types and ore-fluid compositions of these porphyry deposits. 相似文献
18.
The Sanjiang Tethyan Metallogenic Domain (STMD) is an important part of the Tethyan giant metallogenic belt. The Yidun Arc is a part of the STMD in the eastern Tibetan Plateau. Recently, four newly discovered Mo–Cu–(W) ore deposits related to granitic intrusions were found distributed along the north-south strike in the southern Yidun Arc, which are identified as the Xiuwacu, Relin, Hongshan, and Tongchanggou deposits herein. These four deposits formed along high-angle north-northwest or north-west strike-slip faults, with vein-type and porphyry-type Mo–Cu mineralization developed in the intrusions. Molybdenite Re–Os and zircon U–Pb dating together with zircon Hf isotopes and whole-rock geochemistry of the intrusions were studied to discern the relationship between mineralization and magmatism, metallogenesis, and tectonic settings. Molybdenite from skarn-type mineralization at the Hongshan deposit has a Re–Os isochron age of 81.2 ± 2.6 Ma (MSWD = 1.3, n = 5) consistent with previously published zircon U–Pb ages and Re–Os ages of porphyry-type Mo mineralization. These results indicate that the Hongshan is a Late Cretaceous porphyry-skarn Cu–Mo deposit. Zircon U–Pb ages of the granitic intrusions in the Xiuwacu, Relin, and Tongchanggou deposits varying from ~ 87.4 Ma to ~ 82.7 Ma. Combined with published molybdenite Re–Os age spectrum (~ 85 Ma to ~ 81.2 Ma), it is proposed that the Mo–Cu–(W) mineralization in the Shangri-La region is spatially, temporally, and probably genetically related to the Late Cretaceous granitic intrusions. The Relin, Hongshan, and Tongchanggou intrusions have high SiO2 (65.2–70.0 wt.%), Sr (363–905 ppm), Sr/Y (22–72), and La/Yb (37–69) ratios, and low Y (11.6–17.0 ppm) and Yb (0.97–1.59 ppm), which displayed adakitic affinities. Their low MgO (0.66–1.44 wt.%), Mg# (25–46), variable negative zircon εHf(t) values (− 7.9 to − 2.3), and Proterozoic two-stages Hf model ages (TDM2 = 1.13–1.62 Ga) suggest that they were probably dominantly derived from partial melting of thickened lower continental crust. According to the tectonic evolution of the Bangong Meso-Tethys Ocean during the Late Mesozoic, the Late Cretaceous igneous event and mineralization in the Yidun Arc likely formed under a late- or post-collision extensional environment, probably related to the collision between the Lhasa and Qiangtang terranes during the Late Cretaceous. 相似文献
19.
Bernard Charlier Olivier Namur Simon Malpas Cédric de Marneffe Jean-Clair Duchesne Jacqueline Vander Auwera Olivier Bolle 《Lithos》2010,117(1-4):119-134
The late-Proterozoic Allard Lake ilmenite deposit is located in the Havre-Saint-Pierre anorthosite complex, part of the allochtonous polycyclic belt of the Grenville Province. Presently the world's largest Fe–Ti oxide deposit, it had a pre-mining amount in excess of 200 Mt at grades over 60 wt.% hemo-ilmenite. The main ore body is a funnel-shaped intrusion, measuring 1.03 × 1.10 km and 100–300 m-thick. Two smaller bodies are separated by faults and anorthosite. The ore is an ilmenite-rich norite (or ilmenitite) made up of hemo-ilmenite (Hem22.6–29.4, 66.2 wt.% on average), andesine plagioclase (An45–50), aluminous spinel and locally orthopyroxene. Whole-rock chemical compositions are controlled by the proportions of ilmenite and plagioclase ± orthopyroxene which supports the cumulate origin of the deposit. Ore-forming processes are further constrained by normal and reverse fractionation trends of Cr concentration in cumulus ilmenite that reveal multiple magma emplacements and alternating periods of fractional crystallization and magma mixing. Mixing of magmas produced hybrids located in the stability field of ilmenite resulted in periodic crystallization of ilmenite alone. The unsystematic differentiation trends in the Allard Lake deposit, arising from a succession of magma pulses, hybridisation, and the fractionation of hemo-ilmenite alone or together with plagioclase suggest that the deposit formed within a magma conduit. This dynamic emplacement mechanism associated with continuous gravity driven accumulation of Fe–Ti oxides and possibly plagioclase buoyancy in a fractionating ferrobasalt explains the huge concentration of hemo-ilmenite. The occurrence of sapphirine associated with aluminous spinel and high-alumina orthopyroxene (7.6–9.1 wt.% Al2O3) lacking exsolved plagioclase supports the involvement of a metamorphic overprint during the synchronous Ottawan orogeny, which is also responsible for strong textural equilibration and external granule of exsolved aluminous spinel due to slow cooling. 相似文献
20.
《Journal of African Earth Sciences》2005,41(1-2):25-39
Ag-ores occur in a specific zone of the Bou Azzer Co–As deposit in the Precambrian basement of the Anti-Atlas belt (Morocco), especially in highly microfractured quartz-depleted diorite. They formed after the main Co–As stage of mineralization, but both ore stages (Co–As and Ag-ore) appear linked to similar immiscible fluids: an hyper-saline Na–Ca brine (5.5–22 wt.%. eq. NaCl and 13.5–18.5 wt.% eq. CaCl2, with Na/Ca ranging from 0.4 to 1.2 during Ag-mineralization) occurring as L + V ± halite fluid inclusions and CH4–(N2) gas dominated fluids. Pressure–temperature estimates for the Ag-stage range from 40 to 80 MPa and 150 to 200 °C e.g. at a temperature slightly lower than that of the preceding Co–As stage (200–220 °C).Chlorinity, cation (Na/Ca ca. 2.2) and halogen ratios (Cl/Br from 300 to 360) are typical of deep basinal brines, especially of surface-evaporated brines that have exceeded halite saturation. The primary brines were modified by fluid–rock interaction during burial and migration through the basement. Ag-deposition was probably favoured by dilution and cooling due to the mixing of brines with less saline fluids. Similarities between the Ag-brines from Bou Azzer, Zgounder and Imiter suggest a regional scale circulation of basinal brines during extension probably later than the Triassic, during the early stages of rifting of the Atlantic. 相似文献