首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The late Miocene Chasicoan mammal-bearing deposits exposed along the lower reach of Arroyo Chasicó are composed of cross-bedded, very fine sandstones interpreted as a channel-bar deposit (lithofacies association 1) grading upward into sandy siltstones (lithofacies association 2), probably accumulated through relatively high-density flows in a marginal channel and/or floodplain environment. The uppermost levels are dominantly composed of mudstones and sandy siltstones (lithofacies association 3) deposited in generally low-energy conditions of sedimentation in a swampy environment. Several paleosols (lithofacies P) are present, indicating that the succession was the result of episodic fluvial sedimentation. The volcaniclastic composition (primary and reworked pyroclastics) suggests that the fluvial system drained the westward region by the Andean foothills. An impact event dated at 9.23 ± 0.09 Ma and recorded by impact glasses (escorias) during deposition of lithofacies Sp enables the fine tuning of the chronology of the deposits through high-resolution magnetostratigraphic profiles, which indicate that the approximately 9.4 m thick succession recorded by lithofacies association 1 and 2 accumulated between 9.43 and 9.07 Ma. The lithofacial arrangement of the succession does not support the current differentiation of the Arroyo Chasicó Formation into the Vivero and Las Barrancas members. Previous biostratigraphic interpretations contain significant inconsistencies in light of the revised stratigraphy proposed here.  相似文献   

2.
The Cenozoic record of the north-western domain of the Duero basin is articulated at the surface through a set of continental depositional sequences called, from base to top, the Vegaquemada sequence, the Candanedo sequence, and the Barrillos sequence. These depositional sequences were deposited in continental sedimentary environments. The deposition of the first sequence occurred through a fluvial system with floodplains cut by low-sinuosity channels. The Vegaquemada sequence was developed between the Middle Eocene and the Early Agenian. The second sequence was formed by a set of highly efficient transport alluvial fans that evolved laterally towards fluvial systems with low-sinuosity fluvial channels and an extensive floodplain, where several types of palaeosols were formed. This sequence developed between the Early Agenian and the Late Vallesian. The third unit–the Barrillos sequence (between the Late Vallesian and the Turolian/Ruscinian transition), was generated by a set of highly efficient transport alluvial fans dominated by low-sinuosity fluvial channels.In subsurface geology, seismic and well data are used to rebuild the stratigraphic architecture. The two basal depositional sequences can be identified with two seismic units: the Palaeogene Seismic Unit (PgSU) and the Neogene Seismic Unit (NgSU), respectively. In the present work, we obtained the isovelocity, isochron, and isobath maps for the top and base of the two Cenozoic units. The Palaeozoic (PzSU) and Mesozoic (MzSU) seismic units are found under these two units. Through study of the logs of the various boreholes, it was only possible to analyse the upper 700 m of the Candanedo Sequence (NgSU), without encompassing the total thickness of the unit. Several middle-order sequences were differentiated, in general showing a sequential fining-upwards evolutionary character. Additionally, for the boreholes analysed two main types of electrofacies were identified, both representing fluvial channels and floodplain deposits.The north-western domain of the Duero basin is interpreted to have been formed in response to the tectonic uplifting of the Cantabrian Mountains since Middle-Eocene times. Integration of the data concerning the surface and subsurface geology in this domain reveals that this basin edge behaved as a foreland basin during Cenozoic stages. The foredeep, with a depth of 2800 m, is oriented east–west and has a sediment thickness of up to 3500 m. The forebulge is located in the southwestern zone and represents an area of basement uplifting in which a minimum thickness of materials from the Cenozoic depositional sequences has accumulated.  相似文献   

3.
This paper investigates slope channel initiation by seabed irregularities that were initially formed by slump scars in the lower to middle Jatiluhur Formation, part of the middle- to late Miocene successions in the Bogor Trough, West Java. This Miocene succession is up to 1000 m thick in the study area, and is interpreted as a prograding slope–shelf system that formed during a period of falling- and lowstand stages in relative sea level. The lower part of the formation is a siltstone-dominated siliciclastic succession, containing slump deposits, slump-scar-fill deposits, and minor channel-fill deposits, which formed in slope and shelf-margin environments. In contrast, the middle part, which gradationally overlies the lower part, is characterized by shallow-marine carbonates.The slump-scars-fill deposits have an overall lenticular geometry, and are 140–480 m wide and 0.4–1.6 m thick. Some have distinct erosional bases, which cut into the underlying siltstones, in association with medium- to coarse-grained sandstones with lateral-accretion surfaces and tractional structures common in channel-fill deposits. The incident link of slump-scar-fill deposits and channel-fill deposits in the prograding slope–shelf succession of the lower to middle Jatiluhur Formation suggests that some slump scars formed incipient seabed irregularities that may have played an important role in the development of slope channels. The present study provides one example of the various potential mechanisms that can result in channel formation in a slope setting.  相似文献   

4.
《Tectonophysics》2001,330(1-2):25-43
A detailed gravimetric study has been integrated with the most recent stratigraphic data in the area comprised between the Arno river and the foothills of the Northern Apennines, in northern Tuscany (central Italy). A Plio–Pleistocene basin lies in this area; its sedimentary succession can be subdivided from the bottom, in five allostratigraphic units: (1) Lower–Middle Pliocene shallow marine deposits; (2) Late Pliocene (?)–Early Pleistocene fluvio-lacustrine deposits; (3) late–Early Pleistocene–Middle Pleistocene alluvial to fluvial red conglomerates (Montecarlo Formation); (4) Middle Pleistocene alluvial to fluvial red conglomerates (Cerbaie and Casa Poggio ai Lecci Formations); (5) alluvial to fluvial deposits of Late Pleistocene age. The Bouguer anomaly map displays a strong minimum in the northeastern sector of the basin, and a gentle gradient from west to east. The map of the horizontal gradients permits to recognise three major fault zones, two of which along the southwestern and northeastern margins of the basin, and one along the southeastern edge of the Pisani Mountains. A 2.5D gravimetric modelling along a SW–NE section across the basin displays a thick wedge of sediments of density 2.25 g/cm3 (about 1700 m in the depocenter) overlying a layer of density 2.55 g/cm3, 1000 m thick, which rests on a basement of 2.72 g/cm3. The most of the sediment wedge is here referred to Upper Pliocene (?)–Lower Pleistocene, because borehole data show Pliocene marine deposits thinning northward close to the southern margin of the area. The layer below is referred to Ligurids and upper Tuscan Nappe units; the densest layer is interpreted as composed of Triassic evaporites, quartzites and Palaeozoic basement. According to Carmignani low-angle extensional tectonics began between Serravallian and early Messinian, thinning the Apennine nappe stack. At the end of Middle Pliocene, syn-rift deposition ceased in the Viareggio Basin (west of the investigated area) as demonstrated by Argnani and co-workers, and high-angle extensional tectonics migrated eastward up to the Monte Albano Ridge. A syn-rift continental sedimentary wedge developed in Late Pliocene–Early Pleistocene, until its hanging wall block was dismembered, during late Early Pleistocene, by NE-dipping faults, causing the uplift of its western portion (the Pisani Mountains). This breakup caused exhumation and erosion of Triassic units whose clastics where shed into the surrounding palaeo-Arno Valley in alluvial–fluvial deposits unconformably overlying the Lower Pleistocene syn-rift deposits. In the late Pleistocene SW–NE-trending fault systems created the steep southeastern edge of the Pisani Mountains and the resulting throw is recorded in Middle Pleistocene deposits across the present Arno Valley. This tectonic phase probably continues at present, offshore Livorno, as evidenced by the epicentres of earthquakes.  相似文献   

5.
Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.  相似文献   

6.
《Quaternary Science Reviews》2004,23(16-17):1847-1865
High-resolution seismic data and sediment cores show that an up to 280 m thick sedimentary sequence has been deposited on the south Vøring margin, off mid-Norway, the last ca 250 ka. The sedimentary succession has been divided into six seismic units, dominated by hemipelagic sediments. Five wedge-shaped massive sequences, of marine isotope stages 8, 6 and 2, interfinger the hemipelagic deposits on the upper slope. The wedge-shaped sequences represent glacigenic debris flows that have been fed by till transported to the shelf edge by grounded ice sheets during maximum glaciations. The hemipelagic units show well-defined depocentres, of various thicknesses, on the upper continental slope. Seismic facies interpretation indicates that the sediment distribution locally has been controlled by currents. Commonly, the hemipelagic units are characterised by parallel and continuous reflectors. However, the second youngest unit identified, deposited between 15.7 and 15.0 14C ka BP, is acoustic transparent. We suggest that this unit has been sourced by along-slope transported meltwater plume deposits, released during the initial stage of the last deglaciation of the Norwegian Channel. The hemipelagic sedimentation rates have varied considerably throughout the studied time period. Until ca 21 14C ka BP the rates did not exceed 1.4 m/kyr, whereas during the Last Glacial Maximum the rates increased and reached values of about 36 m/kyr before decreasing again at ca 15 14C ka BP. Observation of iceberg scourings, of MIS 8 age, about 800 m below the present day sea level, suggest that the south Vøring margin has subsided by a rate of 1.2 m/kyr in the Late Quaternary.  相似文献   

7.
Recent field and subsurface data about the early Neocomian N’dombo series and the Neocomian to mid-Barremian Schistes series of the interior basin of Gabon further our understanding of the initial stages of early Cretaceous N40–60°E extensional rifting. The syn-rift series comprise fluvial–lacustrine claystones–sandstones, rare conglomerates, and carbonates. The syn-rift fill begins with braided-stream feldspathic sandstones. These are overlain first by fluvial–lacustrine deposits and then by predominantly lacustrine–palustrine claystones, which are potential petroleum source rocks. The claystones are eroded in part and are capped by the pre-Aptian angular unconformity marking the end of Cretaceous rifting in the interior basin. This change in syn-rift facies and depositional environments reflects a rise in base level in response to accelerated subsidence after the initial stage of rifting. The syn-rift deposits form two fining-upward sequences several 100–1000 m thick.  相似文献   

8.
Detailed outcrop studies at the flanks of Al Kufrah Basin, Libya, reveal the nature of glacially-related sedimentation and post-depositional deformation styles produced in association with the Late Ordovician glaciation, during which ice sheets expanded northward over North Africa to deposit the Mamuniyat Formation. At the SE basin flank (Jabal Azbah), the Mamuniyat Formation is sand-dominated, and incises interfingering braidplain and shallow marine deposits of the Hawaz Formation. The glacially-related sediments include intercalations of mud-chip bearing tabular sandstones and intraformational conglomerates, which are interpreted as turbidite and debrite facies respectively. These record aggradation of an extensive sediment wedge in front of a stable former ice margin. An increase in mudstone content northward is accompanied by the occurrence of more evolved turbidites. A widespread surface, bearing streamlined NW–SE striking ridges and grooves, punctuates this succession. The structures on the surface are interpreted to have formed during a regional north-westward ice advance. Above, siltstones bearing Arthrophycus burrows, and Orthocone-bearing sandstones beneath tidal bars testify to glaciomarine conditions for deposition of the underflow deposits beneath. By contrast, the northern basin margin (Jabal az-Zalmah) is appreciably different in recording shallower water/paralic sedimentation styles and major glaciotectonic deformation features, although facies analysis also reveals northward deepening. Here, a siltstone wedging from 8 to 50 m toward the north was deposited (lower delta plain), succeeded by climbing ripple cross-laminated sandstones up to 60 m in thickness (distal through proximal delta mouth bar deposits) with occasional diamictite interbeds. These rocks are deformed by thrusts and > 50 m amplitude fault-propagation folds, the deformation locally sealed by a diamictite then overlain by conglomeratic lag during ultimate deglaciation. Integrating observations from both basin margins, a model of fluvial-dominated delta systems feeding a pulsed debrite and turbidite fan system in a shallow proglacial shelf is proposed.  相似文献   

9.
Modern deltas are understood to have initiated around 7.5–9 ka in response to the deceleration of sea-level rise. This episode of delta initiation is closely related to the last deglacial meltwater events and eustatic sea-level rises. The initial stage of the Mekong River delta, one of the world's largest deltas, is well recorded in Cambodian lowland sediments. This paper integrates analyses of sedimentary facies, diatom assemblages, and radiocarbon dates for three drill cores from the lowland to demonstrate Holocene sedimentary evolution in relation to sea-level changes. The cores are characterized by a tripartite succession: (1) aggrading flood plain to natural levee and tidal–fluvial channel during the postglacial sea-level rise (10–8.4 ka); (2) aggrading to prograding tidal flats and mangrove forests around and after the maximum flooding of the sea (8.4–6.3 ka); and (3) a prograding fluvial system on the delta plain (6.3 ka to the present). The maximum flooding of the sea occurred at 8.0 ± 0.1 ka, 2000 years before the mid-Holocene sea-level highstand, and tidal flats penetrated up to 20–50 km southeast of Phnom Penh after a period of abrupt ～5 m sea-level rise at 8.5–8.4 ka. The delta progradation then initiated as a result of the sea-level stillstand at around 8–7.5 ka. Another rapid sea-level rise at 7.5–7 ka allowed thick mangrove peat to be widely deposited in the Cambodian lowland, and the peat accumulation endured until 6.3 ka. Since 6.3 ka, a fluvial system has characterized the delta plain, and the fluvial sediment discharge has contributed to rapid delta progradation. The uppermost part of the sedimentary succession, composed of flood plain to natural-levee sediments, reveals a sudden increase in sediment accumulation over the past 600–1000 years. This increase might reflect an increase in the sediment yield due to human activities in the upper to middle reaches of the Mekong, as with other Asian rivers.  相似文献   

10.
In South-East Asia, sedimentary basins displaying continental Permian and Triassic deposits have been poorly studied. Among these, the Luang Prabang Basin (North Laos) represents a potential key target to constrain the stratigraphic and structural evolutions of South-East Asia. A combined approach involving sedimentology, palaeontology, geochronology and structural analysis, was thus implemented to study the basin. It resulted in a new geological map, in defining new formations, and in proposing a complete revision of the Late Permian to Triassic stratigraphic succession as well as of the structural organization of the basin. Radiometric ages are used to discuss the synchronism of volcanic activity and sedimentation.The Luang Prabang Basin consists of an asymmetric NE-SW syncline with NE-SW thrusts, located at the contact between Late Permian and Late Triassic deposits. The potential stratigraphic gap at the Permian–Triassic boundary is therefore masked by deformation in the basin. The Late Triassic volcaniclastic continental deposits are representative of alluvial plain and fluvial environments. The basin was fed by several sources, varying from volcanic, carbonated to silicic (non-volcanic). U–Pb dating of euhedral zircon grains provided maximum sedimentation ages. The stratigraphic vertical succession of these ages, from ca. 225, ca. 220 to ca. 216 Ma, indicates that a long lasting volcanism was active during sedimentation and illustrates significant variations in sediment preservation rates in continental environments (from ∼100 m/Ma to ∼3 m/Ma). Anhedral inherited zircon grains gave older ages. A large number of them, at ca. 1870 Ma, imply the reworking of a Proterozoic basement and/or of sediments containing fragments of such a basement. In addition, the Late Triassic (Carnian to Norian) sediments yielded to a new dicynodont skull, attributed to the Kannemeyeriiform group family, from layers dated in between ∼225 and ∼221 Ma (Carnian).  相似文献   

11.
《Sedimentology》2018,65(5):1447-1481
  相似文献   

12.
The Paraguay belt comprises a thick sedimentary succession deposited on the southwestern border of the Amazonian Craton and the Rio Apa Block. The base of the succession in the southern Paraguay belt is marked by a level of glacially derived deposits from the Puga Formation associated with banded iron formations, which has been assumed to be end-Cryogenian in age (635 Ma) by previous authors is spite of the lack of geochronological data. Here we present the first U–Pb SHRIMP ages on detrital zircon grains separated from the matrix of six samples of these diamictites two different localities (Puga Hill and Bodoquena area). U–Pb ages determined from two samples (ca. 130 grains) of Puga Hill show a large variation between 970 Ma and 2100 Ma. Rocks with these ages can be found in the Amazonian Craton suggesting that it is the most probable source of the sediments. Detrital zircons (ca. 230 grains) from the Bodoquena area (about 200 km south of Puga Hill) range from 706 to 1990 Ma. The 1760 Ma source is significantly more important in these samples, comprising more than 70% of analyzed grains, and indicates provenance from the adjacent Rio Apa Block. The youngest zircon was dated at 706 ± 9 Ma, thus constraining the maximum depositional age for the Puga Formation. Possible sources for this younger population could be either the juvenile Mara Rosa magmatic arc in the Brasilia belt, or the rocks from the Laurentian external fold belts located to the west of the sampled area in Neoproterozoic paleogeographic reconstructions. The maximum depositional age of the diamictites (and associated BIFs), together with cap carbonate carbon and strontium isotope data (δ13C = ? 5.0 and 87Sr/86Sr = 0.7077) in Puga Hill, indicate that they were deposited after 700 Ma, suggesting that they may represent the end-Cryogenian event.  相似文献   

13.
A siliciclastic-dominated succession (～11 m thick) underlying Harrat Rahat, belonging to the Miocene–Pliocene Bathan Formation is recently exposed at Al-Rehaili area, North Jeddah, Saudi Arabia. It covers a wide spectrum of grain sizes varying from clay-rich mudstones to cobble grade conglomerate and consists of a variety of facies vary from fluvial to marginal and open lacustrine deposited in a half-graben basin formed along the eastern margin of the extensional Red Sea Basin. Field-based sedimentologic investigation enables to identify ten facies grouped into three facies associations (A–C). The depositional history is subdivided into two stages. The first stage represents deposition in gravel to sand-dominated fluvial system sourced from a southern source and grade northward into lacustrine delta and open lacustrine setting. The second stage on the other hand includes deposition of fluvial channels running in E–W direction with attached bank sand bar. Sequence stratigraphic interpretations of the lacustrine deposits enable to identify three unconformity-bounded sequences (SQ1–3). The basal sequence is incomplete, consisting of three aggradationally to progradationally stacked delta plain and delta front parasequences. The second sequence is sharply and erosively overlying a red paleosol bed that defines the upper boundary of the first sequence. It includes two system tracts; upward-fining and deepening lacustrine offshore mudstones of the transgressive system tracts unconformably overlain by red paleosol of the regressive systems tracts. The top of this sequence is delineated at the sharp transgressive surface of erosion at the base of delta mouth bar deposits of sequence 3. Changes in the accommodation and sedimentation rates by basin subsidence under the influence of tectonics and sediment compaction and loading as well as climatic oscillation between semi-arid to arid conditions were the major controls on the fluvio-lacustrine sedimentation and their facies distribution. Tectonic reorganization of the drainage system resulted in the formation of E–W flowing fluvial streams in the second stage.  相似文献   

14.
The geomorphic, stratigraphic and sedimentological characteristics of glaciolacustrine sediments in the metropolitan Detroit, Michigan area were studied to determine environments of deposition and make paleogeographic reconstructions. Nine lithofacies were identified and paleoenvironments interpreted based on their morphostratigraphic relationships with relict landforms. The sediments studied are found southeast of the Defiance and Birmingham moraines lying beneath a lowland characterized by a low morainal swell (Detroit moraine) and a series of lacustrine terraces that descend progressively in elevation southeastward. The glaciolacustrine sediments were deposited approximately 14.3–12.4 kA BP during the Port Bruce and Port Huron glacial phases of late Wisconsinan time, and are related to proglacial paleolakes Maumee, Arkona, Whittlesey, Warren, Wayne, Grassmere, Lundy and Rouge. The glaciolacustrine section is typically 2–4 m thick and consists of a basal unit of wavy-bedded clayey diamicton overlain by a surficial deposit of stratified and cross-stratified sand and gravel. The basal unit is comprised of subaqueous debris flow deposits that accumulated as subaqueous moraine in paleolake Maumee along the retreating front of the Huron lobe. The surficial deposits of sand and gravel were formed by traction, resulting from lacustrine wave activity and fluvial processes, in lakebed plain, beach ridge and deltaic depositional settings. Much of the lake-margin sand and gravel was derived from clayey diamicton by lacustrine wave action and winnowing, and that associated with paleolakes of the Port Huron phase is largely reworked Port Bruce sediment. Paleogeographic reconstructions show that the Defiance, Birmingham and Detroit moraines, Defiance and Rochester channels, and the Rochester delta, were deposited penecontemporaneously as paleolake Maumee expanded northward across the map area. A unique type of wavy bedform is characteristic of clayey diamicton deposited by subaqueous mass flow in the study area that is useful for differentiating sediment: 1) deposited by mass flow in subaqueous vs. subaerial settings, and 2) deposited by subaqueous mass flow vs. basal till. These bedforms are a useful tool for identifying subglacial meltwater deposits, and facilitate the mapping and correlation of glacial sediments based on till sheets. The map area provides a continental record of ice sheet dynamics along the southern margin of the Laurentide ice sheet during Heinrich event H-1. The record reveals rapid glacial retreat (～ 0.8 km/yr) contemporaneous with the discharge of a large volume of meltwater. Evidence in the study area for subglacial meltwater is problematic, but indications that periglacial conditions persisted in the map area until ～ 12.7 kA BP, and extended for 200 km or more south of the ice front suggest that a frozen substrate may have contributed to instability of the LIS.  相似文献   

15.
The competing roles of bedrock uplift and climatic change in the formation of fluvial terraces remain uncertain. Most of recent studies have attributed terrace formation to climatic changes and held that, even in tectonically active settings, climate variations control cycles of terrace planation and abandonment. Based on field investigations of loess-paleosol sequences, magnetostratigraphy and optically stimulated luminescence (OSL) dating, we develop a new chronology for a spectacular flight of terraces along the Yellow River near Lanzhou, China over past 1.24 Ma. All the terraces are strikingly similar in that they have several meters of paleosol developed directly above fluvial deposits on the terrace treads, suggesting that the abandonment of each terrace due to river incision occurs during the transition from glacial to interglacial climates. However, the ages of terraces cluster in two relatively short time periods (1.24–0.86 Ma and 0.13 Ma – present). During the intervening time between 0.86 Ma and 0.13 Ma, terraces either did not form or were not preserved. We suggest that this record indicates that rock uplift rates varied through time and influenced terrace formation/preservation. Thus, our results demonstrate the utility of deep chronologic records from fluvial terraces for deconvolving the effects of tectonics and climate on fluvial incision.  相似文献   

16.
《Quaternary Science Reviews》2004,23(16-17):1733-1756
This study shows that successions of Pleistocene carbonate aeolian deposits can be placed successfully in a geochronologic framework using magnetostratigraphic and susceptibility stratigraphic analysis supplemented by luminescence dating, studies of wave-cut platforms, and biostratigraphic evidence. The investigated aeolian system covers a significant part of southernmost Mallorca and is exposed in impressive coastal cliff sections.At the study site at Els Bancals the aeolian system has a maximum thickness of 16 m and is composed of alternating dark red colluvial deposits and greyish red aeolian dune and sand-sheet deposits forming seven cyclostratigraphic units. Each cyclostratigraphic unit represents landscape stabilisation, colluviation, and soil formation followed by dunefield development, when marine carbonate sand was transported far inland by westerly or north-westerly winds. The aeolian system is located on top of a wave-cut marine platform 12–14 m a.s.l. This platform probably formed during a sea-level highstand in Marine Isotope Stage (MIS) 11 (427–364 ka), and renewed marine activity probably later in MIS 11 is indicated by the formation of beach deposits.Two sections at Els Bancals were sampled for a paleomagnetic study; additional samples were taken to detect variations in magnetic susceptibility (MS). The characteristic remanent magnetisation has been recovered for the most part of the succession in spite of diagenetic overprinting. There is evidence for two probably three reversal polarity excursions, possible connected to the Levantine, CR1 and CR0/Biwa III episodes. If this correlation is correct, the sampled succession represents a time interval in the Middle Pleistocene between ca 410 and ca 260 ka. This age estimate is supported by the MS study and by luminescence dates of 333±70 ka (aeolianite from lower part of the succession) and 275±23 ka (aeolianite from the top of the succession).The nature of the succession suggests deposition during alternating warm and moist (colluvial deposition; soil formation) and cold, dry and windy conditions (dunefield formation). The susceptibility signal can be correlated with the insolation signal at 65°N suggesting that environmental variation on Mallorca was linked to orbitally forced climate change, and it seems that aeolian activity and dunefield formation were linked to glacial or stadial periods.  相似文献   

17.
The Ischigualasto Formation in northwestern Argentina contains abundant fluvial channel sandstones, overbank mudstones, and paleosols that were deposited in a northwest-trending continental-rift basin during Late Triassic time. In the study area the formation progressively thins from ～700 m in the west to ～400 m in the east, over a distance of 7 km. This thinning is accompanied by a relative decrease in the abundance of fluvial channel sandstones and an increase in mud-rich overbank deposits and paleosols. While preserved channel deposits in the formation are highly variable in terms of their size and stratigraphic distribution, four general channel forms can be recognized based on their overall cross sectional geometry and internal sedimentary structures. Of these, the dominant channel-body types are interpreted as the deposits of sandy multi-channel fluvial systems. The internal stratigraphic architecture of the Ischigualasto Formation indicates that during deposition, the central part of the basin was the location of a long-lived, north flowing, fluvial channel belt that received relatively continuous channel and proximal overbank deposition. To the east, however, channel-related deposition was more infrequent, resulting in enhanced pedogenic modification of alluvial deposits. The overall thickness and facies trends observed in the Ischigualasto Formation most likely correspond to variations in fault-related accommodation development within the basin during the time of deposition.  相似文献   

18.
The Ordovician System, cropping out in southern and west-central Jordan, consists entirely of a 750 m thick clastic sequence that can be subdivided into six formations. The lower Disi Formation starts conformably above the Late Cambrian Umm Ishrin Formation. According to Cruziana furcifera occurring in the upper third of the Disi Formation, an Early Ordovician age is confirmed. The Disi Formation, consisting mainly of downstream accretion (DA) fluvial architectural element, was deposited in a proximal braidplain flowing N–NE from the southerly-located Arabian–Nubian Shield towards the Tethys Seaway. The braidplain depositional environment evolved into a braidplain-dominated delta through the middle and upper parts of the Disi Formation and the lower part of the overlying Um Saham Formation. The delta was replaced by siliciclastic tidal flats, that in turn evolved into an upper to lower shoreface environment through the upper part of the Um Saham Formation. The depositional environment attained the maximum bathymetric depth during the deposition of the lower and central parts of the third unit, the Hiswa Formation, where offshore graptolite-rich mudstone with intercalated hummocky cross-stratified tempestites were deposited. The Tethys Seaway regressed back through the upper part of the Hiswa Formation promoting a resumption of the lower–upper shoreface sedimentation. Oscillation between the lower to upper shoreface depositional environment characterized the entire fourth unit, the Dubaydib Formation, as well as the Tubeiylliat Sandstone Member of the fifth unit, the Mudawwara Formation. The depositional history of the Ordovician sequence was terminated by a glaciofluvial regime that finally was gradually replaced by a shoreface depositional environment throughout the last unit, the Ammar Formation.  相似文献   

19.
Mineral exploration of prospective areas concealed by extensive post-mineralization cover is growing, being very complex and expensive. The projection of rich and giant Paleocene to early Oligocene porphyry-Cu-Mo belts in northernmost Chilean Andes (17.5–19.5°S) has major exploration potential, but only a few minor deposits have been reported to date, due to the fact that the area is largely covered by post-mineral strata. We integrate the Cenozoic stratigraphic, structural and metallogenic evolution of this sector, in order to identify the most promising regions related to lesser post-mineral cover and the projection of different metallogenic belts. The Paleocene to early Eocene metallogenic belt extends along the Precordillera, with ca. 30 km wide, and includes porphyry-Cu prospects and small Cu (±Mo-Au-Ag) vein and breccia-pipe deposits. Geochronological data indicate an age of 55.5 Ma for an intrusion related to one deposit and ages from 69.5 to 54.5 Ma for hydrothermal alteration in one porphyry-Cu prospect and largest known Cu deposits. The middle Eocene to early Oligocene porphyry belt, in the Western Cordillera farther east, is associated with 46–44 Ma intrusions. It is estimated to be 40-km wide, but is largely concealed by thick post-mineral cover. The youngest Miocene to early Pliocene metallogenic belt, also in the Western Cordillera, is well-exposed and includes Au-Ag epithermal and polymetallic veins and manto-type deposits.The Oligocene-Holocene cover consists of a succession of continental sedimentary and volcanic rocks that overall increase in thickness from 0 to 5000 m, from west to east. These strata are subhorizontal in the west and folded-faulted towards the east. Miocene gentle anticlines and monocline flexures extend along strike for 30–60 km in the Precordillera and were generated by propagation of high-angle east-dipping blind reverse faults with at least 300–900 m of Oligocene bedrock offset. The thickness of cover exceeds 2000 m in the eastern Central Depression, whereas it is generally less than 1000 m in the Precordillera along the Paleocene to early Eocene porphyry-Cu belt and it can reach locally up to 5000 m in the Western Cordillera, above the middle Eocene to early Oligocene belt.In the studied Andean segment, the Miocene to early Pliocene metallogenic belt is superimposed on the Paleocene to Oligocene belts in a 40–50 km wide zone. This overlap may be explained by an accentuated migration of the magmatic front, from east to west, since ca. 25 Ma, as a consequence of subduction slab steepening after a period of magmatic lull and flat subduction from ca. 30–35 to 25 Ma. The identified areas of lesser cover thickness are prone to exploration for concealed deposits, especially along the projection of major porphyry-Cu-Mo belts.  相似文献   

20.
The ∼20 m thick coarse-grained clastic succession in the basal part of Palaeoproterozoic Par Formation, Gwalior Group has been investigated using process-based sedimentology and deductive palaeohydraulics. Bounded between granitic basement at its base and shallow marine succession at the top, the studied stratigraphic interval represents products of an alluvial fan and its strike-wise co-existent braided river system that possibly acted as a tributary for the fan. Detailed facies, facies association analysis allowed identification of two anatomical parts for the fan system viz. proximal and mid fan. While thin proximal fan is represented by products of rock avalanche and hyperconcentrated flows with widely varying rheology, the mid fan is represented by products of sheet floods and flows within streamlets. The interpretation found support from palaeoslope estimation carried out on the fluvial part of the mid fan that plot dominantly within the alluvial fan field demarcated by Blair and McPherson (1994). Dry climatic condition suggested from dominance of stream flow over mass flow deposition within the Par alluvial fan. Strike-wise, the fan is discontinuous and juxtaposed with a braid plain system. In contrast to the fluvial part of fan system, the palaeoslope data from the braid plain system dominantly plot within the ‘natural depositional gap’ defined by Blair and McPherson. A raised palaeoslope for the river systems, as suggested from Proterozoic braid plain deposits around the Globe, is found valid for the Par braid plain system as well. From preponderance of granular and sandy sediments within the alluvial fan and braid plain systems and a pervasive north-westward palaeocurrent pattern within the fluvial systems the present study infers a gently sloping bevelled source area in the south-southeast of the basin with occurrence of steep cliffs only locally.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号