首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
  相似文献   

2.
The analysis of seismic activity variations with space and time is a complex problem. Several statistical methods have been adopted to study these variations. One of the tasks that has attracted the attention of the seismological and statistical community is to explain seismicity patterns by statistical models and apply the results for earthquake prediction. Here the probability distribution of recurrence times as described by Exponential, Gamma, Lognormal, Pareto, Rayleigh and Weibull probability distributions and the idea of conditional probability has been applied to predict the next great (Ms ≥ 6.0 and Ms ≥ 6.5) earthquake around Tehran (r ≤ 200 km). Conditional probability specifies the likelihood that a given earthquake will happen within a specified time. This likelihood is based on the information about past earthquake occurrences in the given region and the basic assumption that future seismic activity will follow the pattern of past activity. The rapid growth of Tehran to approximately 12 million inhabitants has resulted in a much more rapid increase in its vulnerability to natural disasters, especially earthquakes. Several earthquakes affected this region in the past, mostly on the Mosha, Taleqan, Eyvankey and Garmsar faults. The estimated recurrence times for Exponential, Gamma, Lognormal, Pareto, Rayleigh and Weibull distributions has been computed to be 66.64, 14.79, 26.88, 2.37, 67.58 and 80.47, respectively. Accordingly, one may expect that a large damaging earthquake may occur around Tehran approximately every 10 years.  相似文献   

3.
This article is devoted to application of a simulation algorithm based on geostatistical methods to compile and update seismotectonic provinces in which Iran has been chosen as a case study. Traditionally, tectonic maps together with seismological data and information (e.g., earthquake catalogues, earthquake mechanism, and microseismic data) have been used to update seismotectonic provinces. In many cases, incomplete earthquake catalogues are one of the important challenges in this procedure. To overcome this problem, a geostatistical simulation algorithm, turning band simulation, TBSIM, was applied to make a synthetic data to improve incomplete earthquake catalogues. Then, the synthetic data was added to the traditional information to study the seismicity homogeneity and classify the areas according to tectonic and seismic properties to update seismotectonic provinces. In this paper, (i) different magnitude types in the studied catalogues have been homogenized to moment magnitude (Mw), and earthquake declustering was then carried out to remove aftershocks and foreshocks; (ii) time normalization method was introduced to decrease the uncertainty in a temporal domain prior to start the simulation procedure; (iii) variography has been carried out in each subregion to study spatial regressions (e.g., west-southwestern area showed a spatial regression from 0.4 to 1.4 decimal degrees; the maximum range identified in the azimuth of 135?±?10); (iv) TBSIM algorithm was then applied to make simulated events which gave rise to make 68,800 synthetic events according to the spatial regression found in several directions; (v) simulated events (i.e., magnitudes) were classified based on their intensity in ArcGIS packages and homogenous seismic zones have been determined. Finally, according to the synthetic data, tectonic features, and actual earthquake catalogues, 17 seismotectonic provinces were introduced in four major classes introduced as very high, high, moderate, and low seismic potential provinces. Seismotectonic properties of very high seismic potential provinces have been also presented.  相似文献   

4.
Historical and active seismicity in the south-western Alps (France and Italy) shows the recurrence of relatively high-magnitude earthquakes (M ≥ 5.8), like the one that recently affected the Italian Apennine range (M = 6.3 on the 30th March 2009). However, up-to-date detailed mapping of the active fault network has been poorly established. The evaluation of seismological hazard in particular in the highly populated French and Italian coastal region cannot be done without this. Here, we present a detailed study of the main active fault system, based on geological observations along the south-western flank of the Alpine arc. This N140° right-lateral strike-slip active fault system runs along the edge of the Argentera-Mercantour range and can be followed down to the Mediterranean Sea. It is evidenced by (1) Holocene offsets of glacial geomorphology witnessing ongoing fault activity since 10 ka, (2) widespread recent (10–20 Ma) pseudotachylytes featuring long term activity of the faults, (3) active landslides along the main fault zone, (4) geothermal anomalies (hot springs) emerging in the active faults, (5) ongoing low-magnitude seismic activity and (6) localization of the main historical events. In the light of our investigations, we propose a new tectonic pattern for the active fault system in the south-western Alps.  相似文献   

5.
We used data of local earthquakes collected during two recent passive seismic experiments carried out in southern Italy in order to study the seismotectonic setting of the Lucanian Apennine and the surrounding areas. Based on continuous recordings of the temporary stations we extracted over 15,600 waveforms, which were hand-picked along with those recorded by the permanent stations of the Italian national seismic network obtaining a dense, high-quality dataset of P- and S-arrival times. We examined the seismicity occurring in the period 2001–2008 by relocating 566 out of 1047 recorded events with magnitudes ML ≥ 1.5 and computing 162 fault-plane solutions. Earthquakes were relocated using a minimum one-dimensional velocity model previously obtained for the region and a Vp/Vs ratio of 1.83. Background seismicity is concentrated within the upper crust (between 5 and 20 km of depth) and it is mostly clustered along the Lucanian Apennine chain axis. A significant feature extracted from this study relates to the two E–W trending clusters located in the Potentino and in the Abriola–Pietrapertosa sector (central Lucania region). Hypocentral depths in both clusters are slightly deeper than those observed beneath the Lucanian Apennine. We suggest that these two seismic features are representative of the transition from the inner portion of the chain to the external margin characterized by dextral strike-slip kinematics. In the easternmost part of the study area, below the Bradano foredeep and the Apulia foreland, seismicity is generally deeper and more scattered. The sparse seismicity localized in the Sibari Plain, in the offshore area along the northeastern Calabrian coast and in the Taranto Gulf is also investigated thanks to the new recordings. This seismicity shows hypocenters between 12 and 20 km of depth below the Sibari Plain and is deeper (foci between 10 and 35 km of depth) in the offshore area of the Taranto Gulf. 102 well-constrained fault-plane solutions, showing predominantly normal and strike-slip character with tensional axes (T-axes) generally NE oriented, were selected for the stress tensor analysis. We investigated stress field orientation inverting focal mechanism belonging to the Lucanian Apennine and the Pollino Range, both areas characterized by a more concentrated background seismicity.  相似文献   

6.
The strong earthquake (M = 7) that occurred in the Fucino basin (central Italy) on January 13, 1915 was followed by six earthquakes of M > 5.5 and several other shocks of M > 5 in the major seismic zones of the northern Apennines from 1916 to 1920. This seismicity pattern is consistent with the implications of the present tectonic setting in the study area, which suggests that strong decoupling earthquakes in the central Apennines cause a significant increase of tectonic load, and possibly of seismicity, in the northern Apennines. A numerical simulation, carried out by an elastic-viscous model, of the stress diffusion induced by the Fucino and successive largest earthquakes, shows that each of the above shocks occurred when the respective zone was reached by the highest values of the strain and strain rate perturbation triggered by the previous events. Furthermore, the computed strain regime at each earthquake site is consistent with the known faulting pattern. The results provide important insights into the physical mechanism that controls the interaction of seismic sources in the central and northern Apennines.  相似文献   

7.
This is an attempt to analyze the current lithospheric stress pattern in the Baikal rift in terms of nonlinear dynamics as an open self-organizing system in order to gain more insights into the general laws of regional seismicity. According to the suggested approach, the stress pattern inferred from seismic moments of 70,000 MLH ≥ 2.0 events that occurred in the region between 1968 and 1994 is presented as a phase portrait in the phase spaces of the seismic moments. The obtained phase portrait of the system evolution fits well a scenario with triple equilibrium bifurcation where stress bifurcations account for the frequency of M > 5.5 earthquakes. Extrapolation of the results into the nearest future indicates probability of such a bifurcation (a catastrophe of stress), i.e., there is growing risk that M ≈ 7 events may happen in the region within a few years.  相似文献   

8.
For faster and more robust ray tracing in 1-D velocity models and also due to the lack of reliable 3-D models, most seismological centers use 1-D models for routine earthquake locations. In this study, as solution to the coupled hypocenter-velocity problem, we compute a regional P-wave velocity model for southern Iran that can be used for routine earthquake location and also a reference initial model for 3-D seismic tomography. The inversion process was based on travel time data from local earthquakes paired reports obtained by merging the catalogues of Iranian Seismic Center (IRSC, 6422 events) and by the Broadband Iranian National Seismic Network (BIN, 4333 events) for southern Iran in the period 2006 through July 2017. After cleaning the data set from large individual reading errors and by identifying event reports from both networks belonging to same earthquake (a process called event pairing), we obtained a data set of 1115 well-locatable events with a total number of 24,606 P-wave observations. This data set was used to calculate a regional minimum 1-D model for southern Iran as result of an extensive model search by trial-and-error process including several dozens of inversions. Significantly different from previous models, we find a smoothly increasing P-velocity by depth with velocities of 5.8 km/s at shallow and velocities of 6.4 km/s at deepest crustal levels. For well-locatable events, location uncertainties are estimated in the order of ±?3 km for epicenter and double this uncertainty for hypocentral depth. The use of the minimum 1-D model with appropriate station delays in routine hypocenter location processing will yield a high-quality seismic catalogue with consistent uncertainty estimates across the region and it will also allow detection of outlier observations. Based on the two catalogues by IRSC and BIN and using the minimum 1-D model and station delays for all stations in the region, we established a new combined earthquake catalogue for southern Iran. While the general distribution of the seismicity corresponds well with that of the two individual catalogues by IRSC and BIN, the new catalogue significantly enhances the correlation of seismicity with the regional fault systems within and between the major crustal blocks that as an assembly build this continental region. Furthermore, the unified seismic catalogue and the minimum 1-D model resulting from this study provide important ingredients for seismic hazard studies.  相似文献   

9.
The Al Hoceima Mw 6.4 earthquake of 24 February 2004 that occurred in the eastern Rif region of Morocco already hit by a large event in May 1994 (Mw 5.9) has been followed by numerous aftershocks in the months following the event. The aftershock sequence has been monitored by a temporary network of 17 autonomous seismic stations during 15 days (28 March–10 April) in addition to 5 permanent stations of the Moroccan seismic network (CNRST, SPG, Rabat). This network allowed locating accurately about 650 aftershocks that are aligned in two directions, about N10-20E and N110-120E, in rough agreement with the two nodal planes of the focal mechanism (Harvard). The aftershock alignments are long enough, about 20 km or more, to correspond both to the main rupture plane. To further constrain the source of the earthquake main shock and aftershocks (mb > 3.5) have been relocated thanks to regional seismic data from Morocco and Spain. While the main shock is located at the intersection of the aftershock clouds, most of the aftershocks are aligned along the N10-20E direction. This direction together with normal sinistral slip implied by the focal mechanism is similar with the direction and mechanisms of active faults in the region, particularly the N10E Trougout oblique normal fault. Indeed, the Al Hoceima region is dominated by an approximate ENE-SSW direction of extension, with oblique normal faults. Three major 10–30 km-long faults, oriented NNE-SSW to NW-SE are particularly clear in the morphology, the Ajdir and Trougout faults, west and east of the Al Hoceima basin, respectively, and the NS Rouadi fault 20 km to the west. These faults show clear evidence of recent vertical displacements during the late Quaternary such as uplifted alluvial terraces along Oued Rihs, offset fan surfaces by the Rouadi fault and also uplifted and tilted abandoned marine terraces on both sides of the Al Hoceima bay.However, the N20E direction is in contrast with seismic sources identified from geodetic inversions, which favour but not exclusively the N110-120E rupture directions, suggesting that the 1994 and 2004 events occurred on conjugate faults. In any event, the recent seismicity is thus concentrated on sinistral N10-20E or N110-120E dextral strike-slip faults, which surface expressions remain hidden below the 3–5 km-thick Rif nappes, as shown by the tomographic images build from the aftershock sequence and the concentration of the seismicity below 3 km. These observations may suggest that strain decoupling between the thrusted cover and the underlying bedrock and highlights the difficulty to determine the source properties of moderate events with blind faults even in the case of good quality recorded data.  相似文献   

10.
R/S analysis is used in this work to investigate the fractal correlations in terms of the Hurst exponent for the 1998–2011 seismicity data in Southern Mexico. This region is the most seismically active area in Mexico, where epicenters for severe earthquakes (e.g., September 19, 1985, Mw = 8.1) causing extensive damage in highly populated areas have been located. By only considering the seismic events that meet the Gutenberg–Ritcher law completeness requirement (b = 0.97, MGR = 3.6), we found time clustering for scales of about 100 and 135 events. In both cases, a cyclic behavior with dominant spectral components at about one cycle per year is revealed. It is argued that such a one-year cycle could be related to tidal effects in the Pacific coast. Interestingly, it is also found that high-magnitude events (Mw ≥ 6.0) are more likely to occur under increased interevent correlations with Hurst exponent values H > 0.65. This suggests that major earthquakes can occur when the tectonic stress accumulates in preferential directions. In contrast, the high-magnitude seismic risk is reduced when stresses are uniformly distributed in the tectonic shell. Such cointegration between correlations (i.e., Hurst exponent) and macroseismicity is confirmed for spatial variations of the Hurst exponent. In this way, we found that, using the Hurst exponent standpoint, the former presumed Michoacan and the Guerrero seismic gaps are the riskiest seismic zones. To test this empirical finding, two Southern Mexico local regions with large earthquakes were considered. These are the Atoyac de Alvarez, Guerrero (Mw = 6.3), and Union Hidalgo, Oaxaca (Mw = 6.6), events. In addition, we used the Loma Prieta, California, earthquake (October 17, 1989, Mw = 6.9) to show that the high-magnitude earthquakes in the San Andreas Fault region can also be linked to the increments of determinism (quantified in terms of the Hurst exponent) displayed by the stochastic dynamics of the interevent period time series. The results revealed that the analysis of seismic activity by means of R/S analysis could provide further insights in the advent of major earthquakes.  相似文献   

11.
The parametric catalogues of historical earthquakes in East Siberia contain large data gaps. Among these is a 15-year period in the late nineteenth century (1886–1901). This period was not covered by any of macroseismic catalogues known; neither acquisition nor systematization of macroseismic data was ever performed for that purpose. However, 15 years is a rather long period in which large seismic events may have occurred. The present paper deals with the previously unknown earthquake that occurred on November 13, 1898. The primary macroseismic data were taken from regional periodicals. On the strength of all the evidence obtained, the earthquake epicenter is localized in Western Transbaikalia, near the western end of the Malkhansky Range; the magnitude is estimated at M?=?5.9. The information about the large earthquake of November 13, 1898 provides filling significant gaps in knowledge for seismicity in Western Transbaikalia and a better understanding of seismic potential of faults therein. The obtained results show that the periods of seismic quiescence in catalogues may be related to insufficient information on seismicity of Eastern Siberia in the historical past rather than to the absence of large earthquakes.  相似文献   

12.
Coloumbo submarine volcano lies 6.5 km offshore the NE part of the Santorini island complex and exhibits high seismicity along with vigorous hydrothermal activity. This study models the local stress field around Coloumbo's magma chamber and investigates its influence on intrusion emplacement and geometry. The two components of the stress field, hoop and radial stress, are calculated using analytical formulas that take into account the depth and radius of the magma chamber as these are determined from seismological and other observations. These calculations indicate that hoop stress at the chamber walls is maximum at an angle of 74° thus favouring flank intrusions, while the radial stress switches from tensile to compressive at a critical distance of 5.7 km from the center of the magma chamber. Such estimates agree well with neotectonic and seismological observations that describe the local/regional stress field in the area. We analyse in detail the case where a flank intrusion reaches the surface very near the NE coast of Thera as this is the worst-case eruption scenario. The geometrical features of such a feeder dyke point to an average volumetric flow rate of 9.93 m3 s−1 which corresponds to a Volcanic Explosivity Index of 3 if a future eruption lasts about 70 days. Hazards associated with such an eruption include ashfall, ballistic ejecta and base surges due to explosive mixing of magma with seawater. Previous studies have shown that areas near erupting vents are also foci of moderate to large earthquakes that precede or accompany an eruption. Our calculations show that a shallow event (3–5 km) of moment magnitude 5.9 near the eruptive vent may cause Peak Ground Acceleration in the range 122–177 cm s−2 at different locations around Santorini. These values indicate that seismic hazard even due to a moderate earthquake near Coloumbo, is not trivial and may have a significant impact especially on older buildings at Thera island.  相似文献   

13.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

14.
The Visibility Graph (VG) method maps time series into networks or graphs, converting dynamical properties of time series in topological properties of networks. The VG method was applied to the aftershock depleted catalogue of the Kachchh Gujarat (Western India) seismicity from 2003 to 2012, in order to identify possible precursory signatures in the pattern of the VG parameters. The k–M slope (the slope of the line fitting the relationship between the magnitude of the events and their connectivity degrees) seems to sharply increase significantly before the occurrence of the largest shocks (M ⩾ 4.5) of the sequence.  相似文献   

15.
Many authors have proposed that the study of seismicity rates is an appropriate technique for evaluating how close a seismic gap may be to rupture. We designed an algorithm for identification of patterns of significant seismic quiescence by using the definition of seismic quiescence proposed by Schreider (1990). This algorithm shows the area of quiescence where an earthquake of great magnitude may probably occur. We have applied our algorithm to the earthquake catalog on the Mexican Pacific coast located between 14 and 21 degrees of North latitude and 94 and 106 degrees West longitude; with depths less than or equal to 60 km and magnitude greater than or equal to 4.3, which occurred from January, 1965 until December, 2014. We have found significant patterns of seismic quietude before the earthquakes of Oaxaca (November 1978, Mw = 7.8), Petatlán (March 1979, Mw = 7.6), Michoacán (September 1985, Mw = 8.0, and Mw = 7.6) and Colima (October 1995, Mw = 8.0). Fortunately, in this century earthquakes of great magnitude have not occurred in Mexico. However, we have identified well-defined seismic quiescences in the Guerrero seismic-gap, which are apparently correlated with the occurrence of silent earthquakes in 2002, 2006 and 2010 recently discovered by GPS technology.  相似文献   

16.
Seismotectonic zonation studies in the Tell Atlas of Algeria, a branch of the Africa-Eurasia plate boundary, provide a valuable input for deterministic seismic hazard calculations. We delineate a number of seismogenic zones from causal relationships established between geological structures and earthquakes and compile a working seismic catalogue mainly from readily available sources. To this catalogue, for a most rational and best-justified hazard analysis, we add estimates of earthquake size translated from active faulting characteristics. We assess the regional seismic hazard using a deterministic procedure based on the computation of complete synthetic seismograms (up to 1 Hz) by the modal summation technique. As a result, we generate seismic hazard maps of maximum velocity, maximum displacement, and design ground acceleration that blend information from geology, historical seismicity and observational seismology, leading to better estimates of the earthquake hazard throughout northern Algeria. Our analysis and the resulting maps illustrate how different the estimate of seismic hazard is based primarily on combined geologic and seismological data with respect to the one for which only information from earthquake catalogues has been used.  相似文献   

17.
Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, Mw; surface wave magnitude, MS; body-wave magnitude mb; local magnitude ML and duration magnitude Md) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of Mw. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.  相似文献   

18.
Seismic reflection data were acquired across volcanic hosted massive sulfides (VHMS) of Vihanti in order to improve the understanding of the regional geological setting. Commercially processed seismic data from Vihanti are of good quality, but reprocessing can be used to extract additional information about geological structures. Especially, careful velocity analysis influences the quality of seismic images. Differentiating reflections caused by fractures from those caused by lithological contacts is very important for exploration and geological modeling. Reflections from fracture zones known from drilling stack with lower velocity (~ 5100 m/s) compared to typical stacking velocities of the Vihanti area (> 5500 m/s). The reprocessing also indicated that fracture zones are better imaged with low frequencies due to the better overall continuity of the fault zones at scales of hundreds of meters rather than at shorter seismic wavelengths.In full stacks, long offset data can mask structure close to the surface. More detailed seismic images of the shallow subsurface emerged by preferentially stacking short offset data wherever acquisition and processing lines lay close together and were nearly straight. Long offset data remains valuable for imaging deeper structures as well as dipping reflectors. Cross-dip-analysis revealed a bright diffractor located near the base of the Vihanti volcanic basin at 1.5 km depth. The seismic data allow a geological interpretation in which the Vihanti structure has developed through significant thrust faulting and displacement of the lithological contacts. Gentle folds that were formed prior to faulting are visible as undulating reflectivity in seismic sections. The reprocessed seismic section indicates a potential deep extension of the ore-hosting altered volcanic and calc-silicate rocks previously unexplored.  相似文献   

19.
The Kachchh province of Western India is a major seismic domain in an intraplate set-up. This seismic zone is located in a rift basin, which was developed during the early Jurassic break-up of the Gondwanaland. The crustal strain determined from the GPS velocity data of post-seismic time period following the 2001 Bhuj earthquake indicates a maximum strain rate of ∼266 × 10−9 per year along N013°. Focal mechanism solutions of the main event of 26 January 2001 and the aftershocks show that the maximum principal stress axis is close to this high strain direction. Maximum shear strain rate determined from the GPS data of the area has similar orientation. The unusually high strain rate is comparable in magnitude to the continental rift systems. The partitioning of the regional NE–SW horizontal stress (SHmax) by the pre-existing EW-striking boundary fault developed the strike–slip components parallel to the regional faults, the normal components perpendicular to the faults, NE-striking conjugate Riedel shear fractures and tension fractures. The partitioned normal component of the stress is considered to be the major cause for compression across the regional EW faults and development of the second-order conjugate shear fractures striking NE–SW and NW–SE. The NE-striking transverse faults parallel to the anti-Riedel shear planes have become critical under these conditions. These anti-Riedel planes are interpreted to be critical for the seismicity of the Kachchh region. The high strain rate in this area of low to moderate surface heat flow is responsible for deeper position of the brittle–ductile transition and development of deep seated seismic events in this intraplate region.  相似文献   

20.
There are two main ocean-ridge discontinuities in Iceland: the Tjörnes Fracture Zone (TFZ) and the South Iceland Seismic Zone (SISZ). The TFZ is a 120-km-long and as much as 70-km-wide WNW-trending zone of high seismicity. It has three main seismic lineaments: the Husavik-Flatey Fault (HFF), the Dalvik lineament, and the Grimsey lineament. The HFF, a dextral strike-slip fault and active as a transform fault for about 9 Ma, has a cumulative transform-parallel displacement of some 60 km. Offshore, the HFF is marked by a transform (fracture-zone) valley, 5–10 km wide and 3–4 km deep. Onshore the Flateyjarskagi Peninsula the HFF is marked by a 3–5-km-wide zone of intense crustal deformation with numerous strike-slip and normal faults, transform-parallel dykes, dense sets of mineral veins, and subzones of completely crushed rocks, that is, fault cores. Where the HFF comes on land on Tjörnes there is a similar, but much thinner, zone of crushed rocks. The seismic lineaments are located a few tens of kilometres south (Dalvik) and north (Grimsey) of, and run subparallel with, the HFF. Both lineaments are composed of sets of NNW-trending sinistral faults arranged en echelon.The SISZ is a 70-km-long and 10–20-km wide zone of almost continuous seismicity located between the overlapping West and East Volcanic Zones. It produces the largest earthquakes in Iceland, some of which exceed M7, during which the N–S width of the zone may be as great as 50–60 km. The SISZ is partly covered with Holocene lava flows where the seismogenic faults occur as dextral NNE-trending and sinistral ENE-trending conjugate arrays with push-ups between their nearby ends. The same fault-segment trends occur in the Pleistocene pile north of the Holocene lava flows.The HFF is neither perpendicular to the nearby ridge segments nor parallel with the spreading vector. As a consequence, the North Volcanic Zone has propagated to the north and the Kolbeinsey Ridge to the south during the past 1 Ma, resulting in the development of the Grimsey and Dalvik lineaments. Similarly, the tip of the East Volcanic Zone has been propagating rapidly to the southwest during the past 3 Ma. The tip has been at its present location for no more than several hundred thousand years, thus making the SISZ less stable than the HFF. If the propagation of the tip of the East Volcanic Zone continues, it will eventually reach the Reykjanes Ridge, whereby either the West or the East Volcanic Zone becomes extinct. Then the SISZ dies out as a major seismic zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号