首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.  相似文献   

2.
The occurrence of coesite in suevites from the Chesapeake Bay impact structure is confirmed within a variety of textural domains in situ by Raman spectroscopy for the first time and in mechanically separated grains by X‐ray diffraction. Microtextures of coesite identified in situ investigated under transmitted light and by scanning electron microscope reveal coesite as micrometer‐sized grains (1–3 μm) within amorphous silica of impact‐melt clasts and as submicrometer‐sized grains and polycrystalline aggregates within shocked quartz grains. Coesite‐bearing quartz grains are present both idiomorphically with original grain margins intact and as highly strained grains that underwent shock‐produced plastic deformation. Coesite commonly occurs in plastically deformed quartz grains within domains that appear brown (toasted) in transmitted light and rarely within quartz of spheroidal texture. The coesite likely developed by a mechanism of solid‐state transformation from precursor quartz. Raman spectroscopy also showed a series of unidentified peaks associated with shocked quartz grains that likely represent unidentified silica phases, possibly including a moganite‐like phase that has not previously been associated with coesite.  相似文献   

3.
Abstract— Previous workers have shown that an impact ejecta layer at Massignano, Italy contains a positive Ir anomaly, flattened spheroids (pancake spherules), Ni‐rich spinel crystals, and shocked quartz with multiple sets of planar deformation features. Because of sample sizes and work by different investigators, it was not clear if the shocked quartz is associated with the Ir anomaly and pancake spherules or if it belongs to a separate impact event. To address this problem, we carried out a high‐resolution stratigraphic study of this ejecta layer. The ejecta layer was sampled continuously at 1 cm intervals in two adjacent columns. The carbonate was removed with dilute HCl, and the non‐carbonate fraction was gently sieved. Pancake spherules were recovered from the 250–500 μm size fraction and counted. At the peak abundance, the number of pancake spherules in the 250–500 μm size fraction is about 6–7/g of sample. The pancake spherules removed from the 250–500 μm size fraction are mostly translucent to opaque pale green, but some have a grey color or dark opaque patches due to a coating of Ni‐ and Cr‐rich spinel crystals. Energy‐dispersive X‐ray analysis and X‐ray diffraction data indicate that the green spherules are composed of iron‐rich smectite, probably nontronite. Black opaque spinel stringers (dark spinel‐rich pancake spherules), usually <200 μm across, can be seen in a polished section of a block that includes the ejecta layer. None of the dark spinel‐rich pancake spherules were recovered from the sieved non‐carbonate fraction due to their fragile nature, but we believe that they are from the same impact event as the green pancake spherules. The <250 μm size fractions from both columns were disaggregated using ultrasonics and re‐sieved. The 63–125 μm size fractions were then searched for shocked quartz using a petrographic microscope. At the peak‐abundance level, the number of shocked quartz grains in the 63–125 μm size fraction is about 7/g of sample. Some of the shocked quartz grains have a “toasted” appearance. These grains have a brownish color and contain a patchy distribution of faint, densely spaced planar deformation features (PDFs). Polymineralic fragments containing one or two shocked quartz grains with one or two sets of PDFs were observed. They appear to have an organic matrix and are probably fragments of agglutinated foraminiferal tests. We searched for, but did not find, coesite or shocked zircons. We found that the peak abundance of the shocked quartz is within a centimeter of the peak abundance of the green pancake spherules. We conclude that the pancake spherules are diagenetically altered clinopyroxene‐bearing spherules and that the shocked quartz, green (and presumably the dark spinel‐rich) pancake spherules, and Ir anomaly all belong to the same impact event. This conclusion is consistent with previous suggestions that the cpx spherule layer may be from the 100 km‐diameter Popigai impact crater in northern Siberia.  相似文献   

4.
Abstract– The Chesapeake Bay impact structure, approximately 85 km in diameter, has been drilled in 2005–2006 at Eyreville (Virginia, USA), to a total depth of 1766 m. In the drill cores, the abundance of shock metamorphosed material is very variable with depth. Shocked mineral and lithic clasts, as well as melt particles, are most abundant in suevitic impact breccia section (1397–1451 m depth). Shocked quartz (i.e., quartz grains with planar fractures and/or planar deformation features) and melt particles, although rare, are also dispersed in the Exmore Formation unit (444–867 m depth). Other lithologies in the Eyreville drill cores show no clear evidence of shock metamorphism. Here, we report on the investigations of 40 samples from the impact breccia section. A total of more than 27,000 quartz grains were examined in about 200 clasts. The abundance of highly shocked clasts tends to decrease with increasing depth. Crystalline clasts derived from the crystalline basement are commonly only slightly shocked (contain generally <10 rel% of shocked quartz grains). The clasts of metamorphosed sediments show a low proportion of shocked quartz grains (mostly <10 rel%). Sedimentary clasts show a wide range of proportions of shocked quartz grains, with several of them being highly shocked clasts (most values between 0 and 40 rel%). Conglomerates show the highest proportion of shocked quartz grains of all types of clasts (up to 83 rel%). Polycrystalline quartz clasts are also commonly highly shocked (contain mostly between 10 and 40 rel% of shocked quartz grains). These hard nonporous clasts are possibly more liable to show evidence of shock. The investigations suggest that the intensity of shock metamorphism is the result of several parameters, such as original position in the target (both horizontal and vertical) and the properties of each lithology (e.g., grain size, porosity, and amount of matrix). According to the universal‐stage investigations, the dominant orientations of planar deformation features in quartz are , , and also .  相似文献   

5.
Abstract— Quartz grains subjected to high‐strain‐rate shock waves owing to meteorite or cometary impact on Earth's surface commonly display shock lamellae. These lamellae appear as remarkably straight, thin, planar features (microstructures) in sets within which lamellae are essentially parallel to each other and spaced ≤ 20 μm apart. Two or more intersecting sets are typically present. Shock lamellae are commonly recognized and identified by optical methods, by use of the transmission electron microscope (TEM), and by etching polished sections and subsequent examination with a scanning electron microscope (SEM) operated in the secondary electron mode. We present here a method for observing planar microstructures in shocked quartz by using a cathodoluminescence (CL) detector attached to a SEM. The method relies on the fact that planar microstructures in quartz arising as a result of shock display no CL whatever; thus, they show up as distinct, thin, black lines on otherwise luminescent quartz grains. We used scanning CL imaging to study shocked quartz from the Ries Crater, Germany, a well‐known impact crater of Miocene age. We demonstrate that shock‐produced planar microstructures are clearly displayed in SEM‐CL images and can be distinguished from microfractures generated by tectonism, and subsequently filled with quartz, and other similar features not related to impact events. The SEM‐CL method provides a powerful supplement to other methods of identifying shocked quartz. It commonly provides better spatial resolution than does standard optical methods, and does not require etching of quartz grains. Further, it is easier and faster to use than are TEM methods, although it is not capable of the fine‐scale defect analysis possible with TEM.  相似文献   

6.
Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.  相似文献   

7.
Abstract– Planar deformation features (PDFs) in quartz are essential proof for the correct identification of meteorite impact structures and related ejecta layers, but can be confused with tectonic deformation lamellae. The only completely reliable method to demonstrate the shock origin of suspected (sub‐) planar microstructures, transmission electron microscope (TEM) observations, is costly and time consuming. We have used a cathodoluminescence (CL) detector attached to a scanning electron microscope (SEM) to image both PDFs and tectonic deformation lamellae in quartz to demonstrate the potential of a simple method to identify PDFs and define characteristics that allow their distinction from tectonic deformation lamellae. In both limited wavelength grayscale and composite color SEM‐CL images, PDFs are easily identified. They are straight, narrow, well‐defined features, whereas tectonic deformation lamellae are thicker, slightly curved, and there is often no clear boundary between lamella and host quartz. Composite color images reveal two types of CL behavior in PDFs: either they emit a red to infrared CL signal or they are nonluminescent. The color of the CL signal emitted by tectonic deformation lamellae ranges from blue to red. For comparison, we also imaged several shocked quartz grains at cryogenic temperature. In most cases, the PDF characteristics in cryo‐CL images do not differ significantly from those in images recorded at room temperature. We conclude that SEM‐CL imaging, especially when color composites are used, provides a promising, practical, low cost, and nondestructive method to distinguish between PDFs and tectonic lamellae, even when the simplest CL techniques available are used.  相似文献   

8.
Abstract— Impact ejecta eroded and transported by gravity flows, tsunamis, or glaciers have been reported from a number of impact structures on Earth. Impact ejecta reworked by fluvial processes, however, are sparsely mentioned in the literature. This suggests that shocked mineral grains and impact glasses are unstable when eroded and transported in a fluvial system. As a case study, we here present a report of impact ejecta affected by multiple fluvial reworking including rounded quartz grains with planar deformation features and diaplectic quartz and feldspar glass in pebbles of fluvial sandstones from the “Monheimer Höhensande” ?10 km east of the Ries crater in southern Germany.  相似文献   

9.
Shocked quartz and feldspar grains commonly exhibit planar microstructures, such as planar fractures, planar deformation features, and possibly microtwins, which are considered to have formed by shock metamorphism. Their orientation and frequency are typically reported to be randomly distributed across a sample. The goal of this study is to investigate whether such microstructures are completely random within a given sample, or whether their orientation might also retain information on the direction of the local shock wave propagation. For this work, we selected samples of shatter cones, which were cut normal to the striated surface and the striation direction, from three impact structures (Keurusselkä, Finland, and Charlevoix and Manicouagan, Canada). These samples show different stages of pre‐impact tectonic deformation. Additionally, we investigated several shocked granite samples, selected at different depths along the drill core recovered during the joint IODP‐ICDP Chicxulub Expedition 364 (Mexico). In this case, thin sections were cut along two orthogonal directions, one parallel and one normal to the drill core axis. All the results refer to optical microscopy and universal‐stage analyses performed on petrographic thin sections. Our results show that such shock‐related microstructures do have a preferred orientation, but also that relating their orientation with the possible shock wave propagation is quite challenging and potentially impossible. This is largely due to the lack of dedicated experiments to provide a key to interpret the observed preferred orientation and to the lack of information on postimpact orientation modifications, especially in the case of the drill core samples.  相似文献   

10.
This study demonstrates a relationship between changes of magnetic susceptibility and microstructure developing in minerals of a magnetite‐bearing ore, experimentally shocked to pressures of 5, 10, 20, and 30 GPa. Shock‐induced effects on magnetic properties were quantified by bulk magnetic susceptibility measurements while shock‐induced microstructures were studied by high‐resolution scanning electron microscopy. Microstructural changes were compared between magnetite, quartz, amphibole, and biotite grains. In the 5 GPa sample, a sharp drop of magnetic susceptibility correlates with distinct fragmentation as well as with formation of shear bands and twins in magnetite. At 10 GPa, shear bands and twins in magnetite are accompanied by droplet‐shaped nanograins. In this shock pressure regime, quartz and amphibole still show intensive grain fragmentation. Twins in quartz and foam‐shaped, highly porous amphibole are formed at 20 and 30 GPa. The formation of porous minerals suggests that shock heating of these mineral grains resulted in localized temperature spikes. The identified shock‐induced features in magnetite strongly advise that variations in the bulk magnetic susceptibility result from cooperative grain fragmentation, plastic deformation and/or localized amorphization, and probably postshock annealing. In particular, the increasing shock heating at high pressures is assumed to be responsible for a partial defect annealing which we suggest to be responsible for the almost constant values of magnetic susceptibility above 10 GPa.  相似文献   

11.
Abstract— Planar features can develop in quartz during comparatively slow tectonic deformation and during very fast dynamic shock metamorphism. Despite their very different structural nature, tectonically induced deformation lamellae have sometimes been mistaken as shock‐induced planar deformation features (PDFs). To understand the formation of deformation lamellae and to address the substantial differences between them and PDFs, we have conducted deformation experiments on single crystals of quartz in a Griggs‐type apparatus, at a temperature of 800 °C, a confining pressure of 12 kbar, and a strain rate of 0.7–1.1 · 10?6. The deformed samples were analyzed with transmission electron microscopy (TEM) and compared to natural PDFs from the Ries Crater, Germany. TEM revealed that tectonic deformation lamellae are associated with numerous sub‐parallel curved subgrain walls, across which the orientation of the crystal changes slightly. The formation of deformation lamellae is due to glide‐ and climb‐controlled deformation in the exponential creep regime. In contrast, the PDFs in shocked quartz from the Ries are perfectly planar, crystallographically controlled features that originally represented amorphous lamellae. Due to post‐shock annealing and hydrothermal activity they are recrystallized and decorated with fluid inclusions.  相似文献   

12.
Abstract— Shock metamorphosed quartz grains have been discovered in a drill core from the central peak of the Late Jurassic, marine Mjølnir structure; this finding further corroborates the impact origin of Mjølnir. The intersected strata represent the Upper Jurassic Hekkingen Formation and underlying Jurassic and Upper Triassic formations. The appearance, orientation, and origin of shock features in quartz grains and their stratigraphic distribution within the core units have been studied by optical and transmission electron microscopy. The quartz grains contain planar fractures (PFs), planar deformation features (PDFs), and mechanical Brazil twins. The formation of PFs is the predominant shock effect and is attributed to the large impedance differences between the water‐rich pores and constituent minerals in target sediments. This situation may have strengthened tensional/extensional and shear movements during shock compression and decompression. The combination of various shock effects indicates possible shock pressures between 5 and at least 20 GPa for three core units with a total thickness of 86 m (from 74.00 m to 171.09 m core depth). Crater‐fill material from the lower part of the core typically shows the least pressures, whereas the uppermost part of the allochthonous crater deposits displays the highest pressures. The orientations of PFs in studied quartz grains seem to become more diverse as the pressure rises from predominantly (0001) PFs to a combination of (0001), , and orientations. However, the lack of experimental data on porous sedimentary rocks does not allow us to further constrain the shock conditions on the basis of PF orientations.  相似文献   

13.
Abstract– Planar deformation features (PDFs) and planar fractures (PFs) have been found and confirmed by optical microscope observations and microRaman spectroscopy in quartz grains from Mt. Oikeyama (Akaishi Mountains, Central Japan), for which the semicircular topographic feature of the ridge suggests a crater formed by an impact event. According to the optical microscope observations, a low shock pressure (8–10 GPa) is estimated by the occurrence of basal or ω PDFs leading to lack of multiple sets of PDFs. In addition, a new type of planar microstructure was found in several quartz grains. The microRaman characteristics of PDFs in quartz from Mt. Oikeyama show the amorphous state indicating the presence of weak broad bands at 400 and 800 cm?1 peak positions. These characteristics are indicative of PDFs that are limited to shocked quartz. This indicates an impact origin for distinct planar microstructures in quartz from Mt. Oikeyama.  相似文献   

14.
Abstract— We measured 852 sets of planar deformation features (PDFs) in shocked quartz grains in impactite samples of the Yaxcopoil (YAX‐1) core and from 4 Cretaceous/Tertiary (K/T) boundary deposits: the Monaca, the Cacarajícara, and the Peñalver formations in Cuba, and DSDP site 536, within 800 km of the Chicxulub crater, in order to investigate variations of PDF orientations in the proximity of the crater. Orientations of PDFs show a broad distribution with peaks at ω {101¯3}, π {101¯2}, and ω {111¯2}, plus r, z {1011¯} orientations with minor c(0001), s{112¯1}, t{224¯1} plus x{516¯1}, and m{101¯0} plus a{112¯0} orientations. Planar deformation features with c(0001) orientation are relatively more abundant in the proximity of the Chicxulub crater than in distal sites such as North America, the Pacific Ocean, and Europe. This feature indicates that in the proximity of the crater, part of the shocked quartz grains in the K/T boundary deposits were derived from the low shock pressure zones. Moreover, the orientations of PDFs with ω {112¯2} plus r, z {101¯1} are high in our studied sites, and frequencies of these orientations decrease with increasing distance from the crater. On the other hand, absence of c(0001) and the rare occurrence of PDFs with ?ω {112¯2} plus r, z {101¯1} orientations in the sample from the YAX‐1 core that was taken at the top of the impactite layer of the Chicxulub crater suggests that the sampling horizon that reflects a certain cratering stage is also an important factor for variations in shocked quartz.  相似文献   

15.
The Tenoumer impact structure is a small, well‐preserved crater within Archean to Paleoproterozoic amphibolite, gneiss, and granite of the Reguibat Shield, north‐central Mauritania. The structure is surrounded by a thin ejecta blanket of crystalline blocks (granitic gneiss, granite, and amphibolite) and impact‐melt rocks. Evidence of shock metamorphism of quartz, most notably planar deformation features (PDFs), occurs exclusively in granitic clasts entrained within small bodies of polymict, glass‐rich breccia. Impact‐related deformation features in oligoclase and microcline grains, on the other hand, occur both within clasts in melt‐breccia deposits, where they co‐occur with quartz PDFs, and also within melt‐free crystalline ejecta, in the absence of co‐occurring quartz PDFs. Feldspar deformation features include multiple orientations of PDFs, enhanced optical relief of grain components, selective disordering of alternate twins, inclined lamellae within alternate twins, and combinations of these individual textures. The distribution of shock features in quartz and feldspar suggests that deformation textures within feldspar can record a wide range of average pressures, starting below that required for shock deformation of quartz. We suggest that experimental analysis of feldspar behavior, combined with detailed mapping of shock metamorphism of feldspar in natural systems, may provide critical data to constrain energy dissipation within impact regimes that experienced low average shock pressures.  相似文献   

16.
Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.  相似文献   

17.
Abstract– The petrographic investigation of a shocked, chalcedony‐, quartzine‐, and quartz‐bearing allochthonous chert nodule (probably Upper Cretaceous) recovered from surficial wadi gravels in the inner parts of the central uplift of the approximately 6 km in diameter Jebel Waqf as Suwwan impact structure, Jordan, reveals new potential shock indicators in microfibrous–spherulitic silica, in addition to well‐established shock‐metamorphic effects in coarser crystalline quartz. The microcrystalline chert groundmass exhibits a macroscopic dendritic and suborthogonal fracture pattern commonly associated with thin “recrystallization bands” that intersect the pre‐existing diagenetic chert fabric. Fibrous aggregates of quartzine spherulites in chalcedony‐quartzine‐quartz veinlets locally have a shattered appearance and show conspicuous “curved fractures” perpendicular to the quartzine fiber direction (and parallel to [0001]) that commonly trend subparallel to planar fractures (PFs) in neighboring shocked quartz. Quartz exhibits PFs, feather features (FFs), and mainly single sets of planar deformation features (PDFs) parallel to the basal plane (0001) (Brazil twins) and, rarely, additional PDFs parallel to {101¯3}. Shock petrography indicates shock pressures of ≥10 GPa and high shock‐induced differential stresses that affected the chert nodule. The internal crosscutting relationships of primary diagenetic and impact‐related deformational features together with shockpressure estimates suggest that the curved fractures across quartzine spherulites might represent specific (low‐ to medium‐pressure) shock‐metamorphic features, possibly in structural analogy to basal plane PFs in quartz. The dendritic–suborthogonal fractures in the microcrystalline chert groundmass and recrystallization bands are likely related to impact‐induced shear deformation and recrystallization, respectively, and cannot be considered as definite shock indicators.  相似文献   

18.
Abstract— The impact origin of small craters in sedimentary rocks is often difficult to confirm because of the lack of characteristic shock metamorphic features. A case in point is the 3.1 Ma Aouelloul crater (Mauritania), 390 m in diameter, which is exposed in an area of Ordovician Oujeft and Zli sandstone. We studied several fractured sandstone samples from the crater rim for the possible presence of shock metamorphic effects. In thin section, a large fraction of the quartz grains show abundant subplanar and planar fractures. Many of the fractures are healed and are evident only as fluid inclusion trails. A few grains showed sets of narrow and densely spaced fluid inclusions trails in one (rarely two) orientations per grain, which could be possible remnants of planar deformation features (PDFs), although such an interpretation is not unambiguous. In contrast, an impact origin of the crater is confirmed by Re-Os isotope studies of the target sandstone and glass found around the crater rim, which show the presence of a distinct extraterrestrial component in the glass.  相似文献   

19.
Abstract— The presence of shocked quartz is one of the key lines of evidence for the impact origin of rocks. Crystallographic orientations of planar deformation feature (PDF) sets in shocked quartz have been used to constrain the peak shock pressure that these grains have experienced. So far no systematic and comparative studies of the various orientation measurement methods and their biases are available. Therefore, three shocked‐quartz‐bearing thin sections from a meta‐greywacke clast in breccia, a biotite‐gneiss, and a sandstone, respectively, were independently analyzed by three operators (two experienced and one inexperienced) using a four‐axis universal‐stage (U‐stage), in order to evaluate the quality, precision, repeatability, and representativeness of U‐stage measurements. Based on the indexing of PDF sets using a new version of the commonly used stereographic projection template, the study of 1751 PDF set orientations in 666 quartz grains in three different shocked rocks shows that differences in abundance and orientation of various PDF sets, as measured by the three separate operators, are rather limited. The precision of U‐stage measurements depends mainly on the number of PDF sets investigated, as the ability level of the operator (experienced versus inexperienced) is only responsible for minor deviations in the number of unindexed planes. The frequency percent of dominant PDF planes may vary by up to 20 percentage points (pp) or 81% for a given crystallographic orientation when only 25 sets are measured. When 100 PDF sets are measured, however, this deviation in dominant orientations is reduced to about 7 pp or 28%. We recommend the use of a new stereographic projection template, which plots the pole positions of five additional, commonly occurring PDF orientations, as it can allow indexing of up to 12 pp more PDF planes; these are planes that would previously be considered unindexed and potentially regarded as errors of measurement. Our results suggest that by following a strict measurement procedure, the reproducibility of U‐stage measurements is good and the results of different studies can be readily compared. However, it is critical that published PDF orientation histograms clearly define what type of frequency measurement is used, whether or not unindexed PDF sets are included in the frequency calculations, the numbers of grains and sets analyzed, and the relative proportions of each PDF set population that are combined in the histograms. This information appears to be essential for effectively comparing datasets from different studies.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号